Sender: LSF System Subject: Job 107972: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sat Aug 5 15:30:05 2006 Results reported at Sat Aug 5 15:33:47 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.08.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 115.19 sec. Max Memory : 12 MB Max Swap : 30 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Sat Aug 5 15:30:30 CDT 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sat Aug 5 15:31:17 CDT 2006 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5e/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v18_49/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Sat Aug 5 15:31:18 CDT 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v18_49/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5e/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Sat Aug 5 15:31:20 CDT 2006 Begin running plate --------------------------------------------------------------- Sat Aug 5 15:31:21 CDT 2006 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9ba3d2c makePlates : beginning loop over plObs chain; makePlates : making 10 plates makePlates : making a plate from ./plPlugMapT-8230.par makePlates : plateInfo struct for plate 2560 : (h4).mjd 54252 (h4).raCen 247.152 (h4).decCen 62.846 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.152 62.846 247.152 64.346 plMakePlateFromTile : mjd of obs : 54252.698818 Observed HA/dec of plate center, fiducial point (deg) : -0.002 62.818 0.002 64.318 The rotation angle of the fid. point is 179.925075 plMakePlateFromTile : beginning loop over 1637 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8231.par makePlates : plateInfo struct for plate 2561 : (h4).mjd 54252 (h4).raCen 262.566 (h4).decCen 64.3689 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 262.566 64.369 262.566 65.869 plMakePlateFromTile : mjd of obs : 54252.741485 Observed HA/dec of plate center, fiducial point (deg) : -0.002 64.350 0.003 65.849 The rotation angle of the fid. point is 179.913231 plMakePlateFromTile : beginning loop over 2104 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8232.par makePlates : plateInfo struct for plate 2562 : (h4).mjd 54252 (h4).raCen 278.721 (h4).decCen 64.1545 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 278.721 64.154 278.721 65.654 plMakePlateFromTile : mjd of obs : 54252.786233 Observed HA/dec of plate center, fiducial point (deg) : -0.002 64.146 0.003 65.645 The rotation angle of the fid. point is 179.911619 plMakePlateFromTile : beginning loop over 1863 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8233.par makePlates : plateInfo struct for plate 2563 : (h4).mjd 53973 (h4).raCen 291.689 (h4).decCen 62.6099 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 291.689 62.610 291.689 64.110 plMakePlateFromTile : mjd of obs : 53973.586692 Observed HA/dec of plate center, fiducial point (deg) : -0.002 62.616 0.002 64.115 The rotation angle of the fid. point is 179.927045 plMakePlateFromTile : beginning loop over 1882 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8234.par makePlates : plateInfo struct for plate 2564 : (h4).mjd 53973 (h4).raCen 302.974 (h4).decCen 60.0073 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 302.974 60.007 302.974 61.507 plMakePlateFromTile : mjd of obs : 53973.617988 Observed HA/dec of plate center, fiducial point (deg) : -0.002 60.020 0.001 61.519 The rotation angle of the fid. point is 179.938813 plMakePlateFromTile : beginning loop over 1353 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8235.par makePlates : plateInfo struct for plate 2565 : (h4).mjd 53973 (h4).raCen 312.386 (h4).decCen 56.5944 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 312.386 56.594 312.386 58.094 plMakePlateFromTile : mjd of obs : 53973.644094 Observed HA/dec of plate center, fiducial point (deg) : -0.002 56.613 0.000 58.112 The rotation angle of the fid. point is 179.949872 plMakePlateFromTile : beginning loop over 1885 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8236.par makePlates : plateInfo struct for plate 2566 : (h4).mjd 53973 (h4).raCen 330.154 (h4).decCen 45.0621 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 330.154 45.062 330.154 46.562 plMakePlateFromTile : mjd of obs : 53973.693375 Observed HA/dec of plate center, fiducial point (deg) : -0.002 45.091 -0.001 46.591 The rotation angle of the fid. point is 179.966676 plMakePlateFromTile : beginning loop over 2044 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8237.par makePlates : plateInfo struct for plate 2567 : (h4).mjd 54132 (h4).raCen 158.573 (h4).decCen 44.3413 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.573 44.341 158.573 45.841 plMakePlateFromTile : mjd of obs : 54132.781310 Observed HA/dec of plate center, fiducial point (deg) : -0.002 44.299 -0.003 45.798 The rotation angle of the fid. point is -179.981458 plMakePlateFromTile : beginning loop over 1572 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8238.par makePlates : plateInfo struct for plate 2568 : (h4).mjd 54132 (h4).raCen 186 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.000 0.000 186.000 1.500 plMakePlateFromTile : mjd of obs : 54132.857232 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -0.031 -0.002 1.468 The rotation angle of the fid. point is 0.002013 plMakePlateFromTile : beginning loop over 1561 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8239.par makePlates : plateInfo struct for plate 2569 : (h4).mjd 54132 (h4).raCen 162 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.000 0.000 162.000 1.500 plMakePlateFromTile : mjd of obs : 54132.790752 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -0.028 -0.003 1.471 The rotation angle of the fid. point is 0.018484 plMakePlateFromTile : beginning loop over 1585 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sat Aug 5 15:31:53 CDT 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 10 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2560.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 659 to list of science objects plFiberPlate : adding sky number 309 to list of science objects plFiberPlate : adding sky number 613 to list of science objects plFiberPlate : adding sky number 624 to list of science objects plFiberPlate : adding sky number 711 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 261 to list of science objects plFiberPlate : adding sky number 597 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 429 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 486 to list of science objects plFiberPlate : adding sky number 281 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 734 to list of science objects plFiberPlate : adding sky number 705 to list of science objects plFiberPlate : adding sky number 488 to list of science objects plFiberPlate : adding sky number 550 to list of science objects plFiberPlate : adding sky number 108 to list of science objects plFiberPlate : adding sky number 464 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 612 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 304 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 756 to list of science objects plFiberPlate : adding sky number 165 to list of science objects plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 632 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 62 142 2 42 105 3 32 104 4 27 147 5 21 165 6 17 107 7 15 116 8 28 147 9 22 158 10 73 210 11 57 143 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6122 40 6 97 8 plFiberPlate : adding spectro-photo std with objId = 6122 40 6 94 68 plFiberPlate : adding spectro-photo std with objId = 6122 40 5 92 144 plFiberPlate : adding spectro-photo std with objId = 6122 40 2 92 63 plFiberPlate : adding spectro-photo std with objId = 6122 40 5 90 30 plFiberPlate : adding spectro-photo std with objId = 6122 40 4 89 36 plFiberPlate : adding spectro-photo std with objId = 6122 40 2 89 87 plFiberPlate : adding spectro-photo std with objId = 6122 40 4 87 106 plFiberPlate : 155 possible sky positions to use as objects from a possible 753. plFiberPlate : 122 possible sky positions to use as objects from a possible 752. plFiberPlate : 89 possible sky positions to use as objects from a possible 751. plFiberPlate : 46 possible sky positions to use as objects from a possible 750. plFiberPlate : 36 possible sky positions to use as objects from a possible 749. plFiberPlate : 61 possible sky positions to use as objects from a possible 748. plFiberPlate : 32 possible sky positions to use as objects from a possible 747. plFiberPlate : 111 possible sky positions to use as objects from a possible 746. plFiberPlate : 87 possible sky positions to use as objects from a possible 745. plFiberPlate : 66 possible sky positions to use as objects from a possible 744. plFiberPlate : 29 possible sky positions to use as objects from a possible 743. plFiberPlate : 19 possible sky positions to use as objects from a possible 742. plFiberPlate : 22 possible sky positions to use as objects from a possible 741. plFiberPlate : 16 possible sky positions to use as objects from a possible 740. plFiberPlate : 10 possible sky positions to use as objects from a possible 739. plFiberPlate : 19 possible sky positions to use as objects from a possible 738. plFiberPlate : 125 possible sky positions to use as objects from a possible 737. plFiberPlate : 89 possible sky positions to use as objects from a possible 736. plFiberPlate : 70 possible sky positions to use as objects from a possible 735. plFiberPlate : 47 possible sky positions to use as objects from a possible 734. plFiberPlate : 21 possible sky positions to use as objects from a possible 733. plFiberPlate : 21 possible sky positions to use as objects from a possible 732. plFiberPlate : 24 possible sky positions to use as objects from a possible 731. plFiberPlate : 31 possible sky positions to use as objects from a possible 730. plFiberPlate : 32 possible sky positions to use as objects from a possible 729. plFiberPlate : 40 possible sky positions to use as objects from a possible 728. plFiberPlate : 29 possible sky positions to use as objects from a possible 727. plFiberPlate : 19 possible sky positions to use as objects from a possible 726. plFiberPlate : 28 possible sky positions to use as objects from a possible 725. plFiberPlate : 14 possible sky positions to use as objects from a possible 724. plFiberPlate : 12 possible sky positions to use as objects from a possible 723. plFiberPlate : 24 possible sky positions to use as objects from a possible 722. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2560.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2560.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2561.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 685 to list of science objects plFiberPlate : adding sky number 330 to list of science objects plFiberPlate : adding sky number 712 to list of science objects plFiberPlate : adding sky number 585 to list of science objects plFiberPlate : adding sky number 550 to list of science objects plFiberPlate : adding sky number 1083 to list of science objects plFiberPlate : adding sky number 325 to list of science objects plFiberPlate : adding sky number 857 to list of science objects plFiberPlate : adding sky number 585 to list of science objects plFiberPlate : adding sky number 854 to list of science objects plFiberPlate : adding sky number 443 to list of science objects plFiberPlate : adding sky number 987 to list of science objects plFiberPlate : adding sky number 313 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 892 to list of science objects plFiberPlate : adding sky number 1014 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 1046 to list of science objects plFiberPlate : adding sky number 579 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 728 to list of science objects plFiberPlate : adding sky number 976 to list of science objects plFiberPlate : adding sky number 382 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 21 to list of science objects plFiberPlate : adding sky number 500 to list of science objects plFiberPlate : adding sky number 68 to list of science objects plFiberPlate : adding sky number 259 to list of science objects plFiberPlate : adding sky number 1057 to list of science objects plFiberPlate : adding sky number 982 to list of science objects plFiberPlate : adding sky number 925 to list of science objects plFiberPlate : adding sky number 289 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 64 208 2 46 149 3 47 147 4 51 212 5 26 262 6 32 146 7 32 146 8 32 209 9 49 233 10 89 289 11 59 207 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6123 40 6 23 82 plFiberPlate : adding spectro-photo std with objId = 6123 40 6 21 185 plFiberPlate : adding spectro-photo std with objId = 6123 40 4 17 136 plFiberPlate : adding spectro-photo std with objId = 6123 40 4 17 24 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 16 92 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 16 13 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 15 178 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 15 168 plFiberPlate : 232 possible sky positions to use as objects from a possible 1086. plFiberPlate : 163 possible sky positions to use as objects from a possible 1085. plFiberPlate : 110 possible sky positions to use as objects from a possible 1084. plFiberPlate : 60 possible sky positions to use as objects from a possible 1083. plFiberPlate : 71 possible sky positions to use as objects from a possible 1082. plFiberPlate : 39 possible sky positions to use as objects from a possible 1081. plFiberPlate : 71 possible sky positions to use as objects from a possible 1080. plFiberPlate : 162 possible sky positions to use as objects from a possible 1079. plFiberPlate : 130 possible sky positions to use as objects from a possible 1078. plFiberPlate : 104 possible sky positions to use as objects from a possible 1077. plFiberPlate : 41 possible sky positions to use as objects from a possible 1076. plFiberPlate : 37 possible sky positions to use as objects from a possible 1075. plFiberPlate : 17 possible sky positions to use as objects from a possible 1074. plFiberPlate : 27 possible sky positions to use as objects from a possible 1073. plFiberPlate : 31 possible sky positions to use as objects from a possible 1072. plFiberPlate : 22 possible sky positions to use as objects from a possible 1071. plFiberPlate : 168 possible sky positions to use as objects from a possible 1070. plFiberPlate : 132 possible sky positions to use as objects from a possible 1069. plFiberPlate : 76 possible sky positions to use as objects from a possible 1068. plFiberPlate : 36 possible sky positions to use as objects from a possible 1067. plFiberPlate : 39 possible sky positions to use as objects from a possible 1066. plFiberPlate : 27 possible sky positions to use as objects from a possible 1065. plFiberPlate : 33 possible sky positions to use as objects from a possible 1064. plFiberPlate : 38 possible sky positions to use as objects from a possible 1063. plFiberPlate : 24 possible sky positions to use as objects from a possible 1062. plFiberPlate : 96 possible sky positions to use as objects from a possible 1061. plFiberPlate : 61 possible sky positions to use as objects from a possible 1060. plFiberPlate : 40 possible sky positions to use as objects from a possible 1059. plFiberPlate : 32 possible sky positions to use as objects from a possible 1058. plFiberPlate : 18 possible sky positions to use as objects from a possible 1057. plFiberPlate : 19 possible sky positions to use as objects from a possible 1056. plFiberPlate : 25 possible sky positions to use as objects from a possible 1055. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2560.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2561.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2561.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2562.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 411 to list of science objects plFiberPlate : adding sky number 285 to list of science objects plFiberPlate : adding sky number 577 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 506 to list of science objects plFiberPlate : adding sky number 402 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 330 to list of science objects plFiberPlate : adding sky number 702 to list of science objects plFiberPlate : adding sky number 700 to list of science objects plFiberPlate : adding sky number 542 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 553 to list of science objects plFiberPlate : adding sky number 479 to list of science objects plFiberPlate : adding sky number 264 to list of science objects plFiberPlate : adding sky number 513 to list of science objects plFiberPlate : adding sky number 123 to list of science objects plFiberPlate : adding sky number 327 to list of science objects plFiberPlate : adding sky number 654 to list of science objects plFiberPlate : adding sky number 616 to list of science objects plFiberPlate : adding sky number 245 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 661 to list of science objects plFiberPlate : adding sky number 258 to list of science objects plFiberPlate : adding sky number 506 to list of science objects plFiberPlate : adding sky number 704 to list of science objects plFiberPlate : adding sky number 433 to list of science objects plFiberPlate : adding sky number 483 to list of science objects plFiberPlate : adding sky number 630 to list of science objects plFiberPlate : adding sky number 322 to list of science objects plFiberPlate : adding sky number 676 to list of science objects plFiberPlate : adding sky number 291 to list of science objects plFiberPlate : adding sky number 594 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 83 165 2 65 117 3 46 85 4 53 122 5 41 144 6 32 97 7 38 97 8 29 170 9 40 145 10 105 166 11 76 137 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6123 40 6 64 324 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 64 199 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 64 194 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 64 115 plFiberPlate : adding spectro-photo std with objId = 6123 40 5 62 89 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 62 31 plFiberPlate : adding spectro-photo std with objId = 6123 40 5 61 218 plFiberPlate : adding spectro-photo std with objId = 6123 40 4 61 73 plFiberPlate : 123 possible sky positions to use as objects from a possible 729. plFiberPlate : 77 possible sky positions to use as objects from a possible 728. plFiberPlate : 59 possible sky positions to use as objects from a possible 727. plFiberPlate : 46 possible sky positions to use as objects from a possible 726. plFiberPlate : 41 possible sky positions to use as objects from a possible 725. plFiberPlate : 60 possible sky positions to use as objects from a possible 724. plFiberPlate : 53 possible sky positions to use as objects from a possible 723. plFiberPlate : 79 possible sky positions to use as objects from a possible 722. plFiberPlate : 64 possible sky positions to use as objects from a possible 721. plFiberPlate : 36 possible sky positions to use as objects from a possible 720. plFiberPlate : 22 possible sky positions to use as objects from a possible 719. plFiberPlate : 18 possible sky positions to use as objects from a possible 718. plFiberPlate : 19 possible sky positions to use as objects from a possible 717. plFiberPlate : 18 possible sky positions to use as objects from a possible 716. plFiberPlate : 22 possible sky positions to use as objects from a possible 715. plFiberPlate : 28 possible sky positions to use as objects from a possible 714. plFiberPlate : 90 possible sky positions to use as objects from a possible 713. plFiberPlate : 68 possible sky positions to use as objects from a possible 712. plFiberPlate : 48 possible sky positions to use as objects from a possible 711. plFiberPlate : 29 possible sky positions to use as objects from a possible 710. plFiberPlate : 18 possible sky positions to use as objects from a possible 709. plFiberPlate : 17 possible sky positions to use as objects from a possible 708. plFiberPlate : 20 possible sky positions to use as objects from a possible 707. plFiberPlate : 25 possible sky positions to use as objects from a possible 706. plFiberPlate : 16 possible sky positions to use as objects from a possible 705. plFiberPlate : 52 possible sky positions to use as objects from a possible 704. plFiberPlate : 49 possible sky positions to use as objects from a possible 703. plFiberPlate : 31 possible sky positions to use as objects from a possible 702. plFiberPlate : 24 possible sky positions to use as objects from a possible 701. plFiberPlate : 9 possible sky positions to use as objects from a possible 700. plFiberPlate : 12 possible sky positions to use as objects from a possible 699. plFiberPlate : 19 possible sky positions to use as objects from a possible 698. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 810 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2561.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2562.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2562.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2563.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 316 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 222 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 436 to list of science objects plFiberPlate : adding sky number 421 to list of science objects plFiberPlate : adding sky number 67 to list of science objects plFiberPlate : adding sky number 401 to list of science objects plFiberPlate : adding sky number 291 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 200 to list of science objects plFiberPlate : adding sky number 101 to list of science objects plFiberPlate : adding sky number 83 to list of science objects plFiberPlate : adding sky number 123 to list of science objects plFiberPlate : adding sky number 247 to list of science objects plFiberPlate : adding sky number 184 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 400 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 55 to list of science objects plFiberPlate : adding sky number 217 to list of science objects plFiberPlate : adding sky number 333 to list of science objects plFiberPlate : adding sky number 430 to list of science objects plFiberPlate : adding sky number 407 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 324 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 118 76 2 101 58 3 70 57 4 95 80 5 106 107 6 74 76 7 64 55 8 88 70 9 93 92 10 164 104 11 112 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6169 40 1 41 152 plFiberPlate : adding spectro-photo std with objId = 6169 40 1 41 132 plFiberPlate : adding spectro-photo std with objId = 6169 40 5 40 15 plFiberPlate : adding spectro-photo std with objId = 6169 40 3 39 146 plFiberPlate : adding spectro-photo std with objId = 6169 40 2 39 342 plFiberPlate : adding spectro-photo std with objId = 6169 40 2 39 34 plFiberPlate : adding spectro-photo std with objId = 6169 40 5 38 171 plFiberPlate : adding spectro-photo std with objId = 6169 40 4 37 255 plFiberPlate : 82 possible sky positions to use as objects from a possible 431. plFiberPlate : 36 possible sky positions to use as objects from a possible 430. plFiberPlate : 19 possible sky positions to use as objects from a possible 429. plFiberPlate : 25 possible sky positions to use as objects from a possible 428. plFiberPlate : 9 possible sky positions to use as objects from a possible 427. plFiberPlate : 18 possible sky positions to use as objects from a possible 426. plFiberPlate : 24 possible sky positions to use as objects from a possible 425. plFiberPlate : 49 possible sky positions to use as objects from a possible 424. plFiberPlate : 37 possible sky positions to use as objects from a possible 423. plFiberPlate : 25 possible sky positions to use as objects from a possible 422. plFiberPlate : 14 possible sky positions to use as objects from a possible 421. plFiberPlate : 8 possible sky positions to use as objects from a possible 420. plFiberPlate : 11 possible sky positions to use as objects from a possible 419. plFiberPlate : 10 possible sky positions to use as objects from a possible 418. plFiberPlate : 10 possible sky positions to use as objects from a possible 417. plFiberPlate : 11 possible sky positions to use as objects from a possible 416. plFiberPlate : 68 possible sky positions to use as objects from a possible 415. plFiberPlate : 50 possible sky positions to use as objects from a possible 414. plFiberPlate : 31 possible sky positions to use as objects from a possible 413. plFiberPlate : 17 possible sky positions to use as objects from a possible 412. plFiberPlate : 4 possible sky positions to use as objects from a possible 411. plFiberPlate : 21 possible sky positions to use as objects from a possible 410. plFiberPlate : 11 possible sky positions to use as objects from a possible 409. plFiberPlate : 10 possible sky positions to use as objects from a possible 408. plFiberPlate : 7 possible sky positions to use as objects from a possible 407. plFiberPlate : 50 possible sky positions to use as objects from a possible 406. plFiberPlate : 36 possible sky positions to use as objects from a possible 405. plFiberPlate : 19 possible sky positions to use as objects from a possible 404. plFiberPlate : 12 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 16 possible sky positions to use as objects from a possible 401. plFiberPlate : 7 possible sky positions to use as objects from a possible 400. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 805 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2562.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2563.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2563.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2564.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 40 to list of science objects plFiberPlate : adding sky number 25 to list of science objects plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 20 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 26 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 8 to list of science objects plFiberPlate : adding sky number 81 to list of science objects plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 145 to list of science objects plFiberPlate : adding sky number 95 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 19 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 79 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 44 24 2 51 14 3 63 10 4 107 19 5 111 37 6 70 32 7 54 26 8 59 24 9 75 32 10 132 26 11 74 16 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 6162 40 4 266 140 plFiberPlate : adding spectro-photo std with objId = 6162 40 4 269 387 plFiberPlate : adding spectro-photo std with objId = 6162 40 3 274 266 plFiberPlate : adding spectro-photo std with objId = 6162 40 4 277 137 plFiberPlate : adding spectro-photo std with objId = 6162 40 6 279 167 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 277 297 plFiberPlate : adding spectro-photo std with objId = 6162 40 1 278 736 plFiberPlate : adding spectro-photo std with objId = 6182 40 2 26 507 plFiberPlate : 18 possible sky positions to use as objects from a possible 137. plFiberPlate : 12 possible sky positions to use as objects from a possible 136. plFiberPlate : 4 possible sky positions to use as objects from a possible 135. plFiberPlate : 0 possible sky positions to use as objects from a possible 134. plFiberPlate: No sky found for bundle at -17.006 -199.789, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 134. plFiberPlate : 4 possible sky positions to use as objects from a possible 133. plFiberPlate : 4 possible sky positions to use as objects from a possible 132. plFiberPlate : 9 possible sky positions to use as objects from a possible 131. plFiberPlate : 14 possible sky positions to use as objects from a possible 130. plFiberPlate : 10 possible sky positions to use as objects from a possible 129. plFiberPlate : 6 possible sky positions to use as objects from a possible 128. plFiberPlate : 6 possible sky positions to use as objects from a possible 127. plFiberPlate : 2 possible sky positions to use as objects from a possible 126. plFiberPlate : 3 possible sky positions to use as objects from a possible 125. plFiberPlate : 2 possible sky positions to use as objects from a possible 124. plFiberPlate : 1 possible sky positions to use as objects from a possible 123. plFiberPlate : 11 possible sky positions to use as objects from a possible 122. plFiberPlate : 19 possible sky positions to use as objects from a possible 121. plFiberPlate : 16 possible sky positions to use as objects from a possible 120. plFiberPlate : 8 possible sky positions to use as objects from a possible 119. plFiberPlate : 6 possible sky positions to use as objects from a possible 118. plFiberPlate : 6 possible sky positions to use as objects from a possible 117. plFiberPlate : 2 possible sky positions to use as objects from a possible 116. plFiberPlate : 2 possible sky positions to use as objects from a possible 115. plFiberPlate : 1 possible sky positions to use as objects from a possible 114. plFiberPlate : 3 possible sky positions to use as objects from a possible 113. plFiberPlate : 19 possible sky positions to use as objects from a possible 112. plFiberPlate : 17 possible sky positions to use as objects from a possible 111. plFiberPlate : 13 possible sky positions to use as objects from a possible 110. plFiberPlate : 7 possible sky positions to use as objects from a possible 109. plFiberPlate : 8 possible sky positions to use as objects from a possible 108. plFiberPlate : 4 possible sky positions to use as objects from a possible 107. plFiberPlate : 3 possible sky positions to use as objects from a possible 106. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 849 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2563.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2564.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2564.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2565.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 1156 to list of science objects plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : adding sky number 1027 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 1150 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 1001 to list of science objects plFiberPlate : adding sky number 83 to list of science objects plFiberPlate : adding sky number 4 to list of science objects plFiberPlate : adding sky number 1059 to list of science objects plFiberPlate : adding sky number 681 to list of science objects plFiberPlate : adding sky number 206 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 448 to list of science objects plFiberPlate : adding sky number 1043 to list of science objects plFiberPlate : adding sky number 936 to list of science objects plFiberPlate : adding sky number 409 to list of science objects plFiberPlate : adding sky number 629 to list of science objects plFiberPlate : adding sky number 659 to list of science objects plFiberPlate : adding sky number 515 to list of science objects plFiberPlate : adding sky number 781 to list of science objects plFiberPlate : adding sky number 113 to list of science objects plFiberPlate : adding sky number 602 to list of science objects plFiberPlate : adding sky number 858 to list of science objects plFiberPlate : adding sky number 344 to list of science objects plFiberPlate : adding sky number 1123 to list of science objects plFiberPlate : adding sky number 652 to list of science objects plFiberPlate : adding sky number 991 to list of science objects plFiberPlate : adding sky number 844 to list of science objects plFiberPlate : adding sky number 709 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 842 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 1 231 2 1 183 3 3 164 4 4 201 5 2 227 6 3 186 7 1 171 8 0 197 9 0 204 10 4 292 11 1 209 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 8 at 227.000 131.000 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate: No obj found for coherent fiber 11 at 93.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 54 537 plFiberPlate : adding spectro-photo std with objId = 6182 40 2 62 774 plFiberPlate : adding spectro-photo std with objId = 6162 40 1 313 663 plFiberPlate : adding spectro-photo std with objId = 6162 40 5 318 222 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 61 165 plFiberPlate : adding spectro-photo std with objId = 6182 40 5 62 140 plFiberPlate : adding spectro-photo std with objId = 6182 40 3 58 331 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 56 642 plFiberPlate : 149 possible sky positions to use as objects from a possible 1125. plFiberPlate : 135 possible sky positions to use as objects from a possible 1124. plFiberPlate : 103 possible sky positions to use as objects from a possible 1123. plFiberPlate : 87 possible sky positions to use as objects from a possible 1122. plFiberPlate : 60 possible sky positions to use as objects from a possible 1121. plFiberPlate : 77 possible sky positions to use as objects from a possible 1120. plFiberPlate : 138 possible sky positions to use as objects from a possible 1119. plFiberPlate : 132 possible sky positions to use as objects from a possible 1118. plFiberPlate : 88 possible sky positions to use as objects from a possible 1117. plFiberPlate : 75 possible sky positions to use as objects from a possible 1116. plFiberPlate : 23 possible sky positions to use as objects from a possible 1115. plFiberPlate : 16 possible sky positions to use as objects from a possible 1114. plFiberPlate : 18 possible sky positions to use as objects from a possible 1113. plFiberPlate : 8 possible sky positions to use as objects from a possible 1112. plFiberPlate : 28 possible sky positions to use as objects from a possible 1111. plFiberPlate : 20 possible sky positions to use as objects from a possible 1110. plFiberPlate : 115 possible sky positions to use as objects from a possible 1109. plFiberPlate : 117 possible sky positions to use as objects from a possible 1108. plFiberPlate : 57 possible sky positions to use as objects from a possible 1107. plFiberPlate : 32 possible sky positions to use as objects from a possible 1106. plFiberPlate : 31 possible sky positions to use as objects from a possible 1105. plFiberPlate : 16 possible sky positions to use as objects from a possible 1104. plFiberPlate : 35 possible sky positions to use as objects from a possible 1103. plFiberPlate : 36 possible sky positions to use as objects from a possible 1102. plFiberPlate : 13 possible sky positions to use as objects from a possible 1101. plFiberPlate : 100 possible sky positions to use as objects from a possible 1100. plFiberPlate : 102 possible sky positions to use as objects from a possible 1099. plFiberPlate : 76 possible sky positions to use as objects from a possible 1098. plFiberPlate : 53 possible sky positions to use as objects from a possible 1097. plFiberPlate : 18 possible sky positions to use as objects from a possible 1096. plFiberPlate : 24 possible sky positions to use as objects from a possible 1095. plFiberPlate : 54 possible sky positions to use as objects from a possible 1094. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 801 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2564.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2565.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2565.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2566.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 649 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 678 to list of science objects plFiberPlate : adding sky number 644 to list of science objects plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : adding sky number 575 to list of science objects plFiberPlate : adding sky number 698 to list of science objects plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : adding sky number 514 to list of science objects plFiberPlate : adding sky number 382 to list of science objects plFiberPlate : adding sky number 126 to list of science objects plFiberPlate : adding sky number 637 to list of science objects plFiberPlate : adding sky number 681 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 497 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 480 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 533 to list of science objects plFiberPlate : adding sky number 240 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 478 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 490 to list of science objects plFiberPlate : adding sky number 384 to list of science objects plFiberPlate : adding sky number 730 to list of science objects plFiberPlate : adding sky number 210 to list of science objects plFiberPlate : adding sky number 409 to list of science objects plFiberPlate : adding sky number 538 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 53 164 2 61 126 3 74 113 4 103 143 5 118 139 6 106 106 7 96 106 8 79 133 9 93 130 10 155 188 11 73 143 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 415 240 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 426 498 plFiberPlate : adding spectro-photo std with objId = 6182 40 3 178 646 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 419 1409 plFiberPlate : adding spectro-photo std with objId = 6182 40 6 167 1508 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 171 1395 plFiberPlate : adding spectro-photo std with objId = 6182 40 6 163 244 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 422 1594 plFiberPlate : 146 possible sky positions to use as objects from a possible 747. plFiberPlate : 86 possible sky positions to use as objects from a possible 746. plFiberPlate : 35 possible sky positions to use as objects from a possible 745. plFiberPlate : 22 possible sky positions to use as objects from a possible 744. plFiberPlate : 33 possible sky positions to use as objects from a possible 743. plFiberPlate : 56 possible sky positions to use as objects from a possible 742. plFiberPlate : 43 possible sky positions to use as objects from a possible 741. plFiberPlate : 57 possible sky positions to use as objects from a possible 740. plFiberPlate : 45 possible sky positions to use as objects from a possible 739. plFiberPlate : 45 possible sky positions to use as objects from a possible 738. plFiberPlate : 27 possible sky positions to use as objects from a possible 737. plFiberPlate : 16 possible sky positions to use as objects from a possible 736. plFiberPlate : 14 possible sky positions to use as objects from a possible 735. plFiberPlate : 20 possible sky positions to use as objects from a possible 734. plFiberPlate : 26 possible sky positions to use as objects from a possible 733. plFiberPlate : 49 possible sky positions to use as objects from a possible 732. plFiberPlate : 62 possible sky positions to use as objects from a possible 731. plFiberPlate : 54 possible sky positions to use as objects from a possible 730. plFiberPlate : 35 possible sky positions to use as objects from a possible 729. plFiberPlate : 24 possible sky positions to use as objects from a possible 728. plFiberPlate : 11 possible sky positions to use as objects from a possible 727. plFiberPlate : 19 possible sky positions to use as objects from a possible 726. plFiberPlate : 14 possible sky positions to use as objects from a possible 725. plFiberPlate : 13 possible sky positions to use as objects from a possible 724. plFiberPlate : 14 possible sky positions to use as objects from a possible 723. plFiberPlate : 38 possible sky positions to use as objects from a possible 722. plFiberPlate : 31 possible sky positions to use as objects from a possible 721. plFiberPlate : 30 possible sky positions to use as objects from a possible 720. plFiberPlate : 19 possible sky positions to use as objects from a possible 719. plFiberPlate : 7 possible sky positions to use as objects from a possible 718. plFiberPlate : 15 possible sky positions to use as objects from a possible 717. plFiberPlate : 23 possible sky positions to use as objects from a possible 716. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 868 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2565.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2566.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2566.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2567.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 392 to list of science objects plFiberPlate : adding sky number 492 to list of science objects plFiberPlate : adding sky number 784 to list of science objects plFiberPlate : adding sky number 374 to list of science objects plFiberPlate : adding sky number 278 to list of science objects plFiberPlate : adding sky number 701 to list of science objects plFiberPlate : adding sky number 359 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 284 to list of science objects plFiberPlate : adding sky number 493 to list of science objects plFiberPlate : adding sky number 685 to list of science objects plFiberPlate : adding sky number 192 to list of science objects plFiberPlate : adding sky number 554 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 394 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 581 to list of science objects plFiberPlate : adding sky number 148 to list of science objects plFiberPlate : adding sky number 506 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 336 to list of science objects plFiberPlate : adding sky number 565 to list of science objects plFiberPlate : adding sky number 546 to list of science objects plFiberPlate : adding sky number 516 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 149 to list of science objects plFiberPlate : adding sky number 491 to list of science objects plFiberPlate : adding sky number 505 to list of science objects plFiberPlate : adding sky number 588 to list of science objects plFiberPlate : adding sky number 264 to list of science objects plFiberPlate : adding sky number 594 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 152 2 21 113 3 19 129 4 15 165 5 18 168 6 15 117 7 9 128 8 12 150 9 14 176 10 30 230 11 22 145 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 42 2 255 28 plFiberPlate : adding spectro-photo std with objId = 3698 41 6 49 50 plFiberPlate : adding spectro-photo std with objId = 3698 41 6 45 4 plFiberPlate : adding spectro-photo std with objId = 3698 41 3 40 71 plFiberPlate : adding spectro-photo std with objId = 3698 41 2 40 9 plFiberPlate : adding spectro-photo std with objId = 3698 41 5 39 77 plFiberPlate : adding spectro-photo std with objId = 3698 41 4 39 110 plFiberPlate : adding spectro-photo std with objId = 3698 41 5 38 67 plFiberPlate : 164 possible sky positions to use as objects from a possible 801. plFiberPlate : 127 possible sky positions to use as objects from a possible 800. plFiberPlate : 87 possible sky positions to use as objects from a possible 799. plFiberPlate : 51 possible sky positions to use as objects from a possible 798. plFiberPlate : 34 possible sky positions to use as objects from a possible 797. plFiberPlate : 28 possible sky positions to use as objects from a possible 796. plFiberPlate : 92 possible sky positions to use as objects from a possible 795. plFiberPlate : 99 possible sky positions to use as objects from a possible 794. plFiberPlate : 85 possible sky positions to use as objects from a possible 793. plFiberPlate : 58 possible sky positions to use as objects from a possible 792. plFiberPlate : 38 possible sky positions to use as objects from a possible 791. plFiberPlate : 19 possible sky positions to use as objects from a possible 790. plFiberPlate : 14 possible sky positions to use as objects from a possible 789. plFiberPlate : 24 possible sky positions to use as objects from a possible 788. plFiberPlate : 26 possible sky positions to use as objects from a possible 787. plFiberPlate : 29 possible sky positions to use as objects from a possible 786. plFiberPlate : 91 possible sky positions to use as objects from a possible 785. plFiberPlate : 81 possible sky positions to use as objects from a possible 784. plFiberPlate : 50 possible sky positions to use as objects from a possible 783. plFiberPlate : 34 possible sky positions to use as objects from a possible 782. plFiberPlate : 11 possible sky positions to use as objects from a possible 781. plFiberPlate : 17 possible sky positions to use as objects from a possible 780. plFiberPlate : 18 possible sky positions to use as objects from a possible 779. plFiberPlate : 9 possible sky positions to use as objects from a possible 778. plFiberPlate : 17 possible sky positions to use as objects from a possible 777. plFiberPlate : 50 possible sky positions to use as objects from a possible 776. plFiberPlate : 50 possible sky positions to use as objects from a possible 775. plFiberPlate : 39 possible sky positions to use as objects from a possible 774. plFiberPlate : 25 possible sky positions to use as objects from a possible 773. plFiberPlate : 21 possible sky positions to use as objects from a possible 772. plFiberPlate : 26 possible sky positions to use as objects from a possible 771. plFiberPlate : 27 possible sky positions to use as objects from a possible 770. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2566.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2567.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2567.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2568.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : adding sky number 564 to list of science objects plFiberPlate : adding sky number 537 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 437 to list of science objects plFiberPlate : adding sky number 71 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 717 to list of science objects plFiberPlate : adding sky number 560 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 294 to list of science objects plFiberPlate : adding sky number 468 to list of science objects plFiberPlate : adding sky number 481 to list of science objects plFiberPlate : adding sky number 540 to list of science objects plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 627 to list of science objects plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 266 to list of science objects plFiberPlate : adding sky number 152 to list of science objects plFiberPlate : adding sky number 792 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 664 to list of science objects plFiberPlate : adding sky number 265 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 349 to list of science objects plFiberPlate : adding sky number 765 to list of science objects plFiberPlate : adding sky number 733 to list of science objects plFiberPlate : adding sky number 609 to list of science objects plFiberPlate : adding sky number 556 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 544 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 172 2 19 123 3 18 109 4 20 134 5 16 152 6 11 117 7 9 112 8 13 164 9 10 168 10 33 229 11 28 169 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 752 40 3 292 104 plFiberPlate : adding spectro-photo std with objId = 752 40 5 282 82 plFiberPlate : adding spectro-photo std with objId = 752 40 1 282 60 plFiberPlate : adding spectro-photo std with objId = 752 40 3 280 13 plFiberPlate : adding spectro-photo std with objId = 752 40 1 279 26 plFiberPlate : adding spectro-photo std with objId = 752 40 6 277 58 plFiberPlate : adding spectro-photo std with objId = 752 40 6 277 34 plFiberPlate : adding spectro-photo std with objId = 752 40 4 276 17 plFiberPlate : 169 possible sky positions to use as objects from a possible 793. plFiberPlate : 105 possible sky positions to use as objects from a possible 792. plFiberPlate : 50 possible sky positions to use as objects from a possible 791. plFiberPlate : 46 possible sky positions to use as objects from a possible 790. plFiberPlate : 47 possible sky positions to use as objects from a possible 789. plFiberPlate : 41 possible sky positions to use as objects from a possible 788. plFiberPlate : 50 possible sky positions to use as objects from a possible 787. plFiberPlate : 100 possible sky positions to use as objects from a possible 786. plFiberPlate : 75 possible sky positions to use as objects from a possible 785. plFiberPlate : 56 possible sky positions to use as objects from a possible 784. plFiberPlate : 32 possible sky positions to use as objects from a possible 783. plFiberPlate : 13 possible sky positions to use as objects from a possible 782. plFiberPlate : 28 possible sky positions to use as objects from a possible 781. plFiberPlate : 29 possible sky positions to use as objects from a possible 780. plFiberPlate : 16 possible sky positions to use as objects from a possible 779. plFiberPlate : 29 possible sky positions to use as objects from a possible 778. plFiberPlate : 88 possible sky positions to use as objects from a possible 777. plFiberPlate : 67 possible sky positions to use as objects from a possible 776. plFiberPlate : 55 possible sky positions to use as objects from a possible 775. plFiberPlate : 37 possible sky positions to use as objects from a possible 774. plFiberPlate : 23 possible sky positions to use as objects from a possible 773. plFiberPlate : 23 possible sky positions to use as objects from a possible 772. plFiberPlate : 32 possible sky positions to use as objects from a possible 771. plFiberPlate : 17 possible sky positions to use as objects from a possible 770. plFiberPlate : 14 possible sky positions to use as objects from a possible 769. plFiberPlate : 60 possible sky positions to use as objects from a possible 768. plFiberPlate : 58 possible sky positions to use as objects from a possible 767. plFiberPlate : 36 possible sky positions to use as objects from a possible 766. plFiberPlate : 19 possible sky positions to use as objects from a possible 765. plFiberPlate : 21 possible sky positions to use as objects from a possible 764. plFiberPlate : 29 possible sky positions to use as objects from a possible 763. plFiberPlate : 21 possible sky positions to use as objects from a possible 762. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 692 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2567.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2568.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2568.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.2/plPlugMapP-2569.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 322 to list of science objects plFiberPlate : adding sky number 648 to list of science objects plFiberPlate : adding sky number 789 to list of science objects plFiberPlate : adding sky number 766 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 661 to list of science objects plFiberPlate : adding sky number 455 to list of science objects plFiberPlate : adding sky number 247 to list of science objects plFiberPlate : adding sky number 751 to list of science objects plFiberPlate : adding sky number 754 to list of science objects plFiberPlate : adding sky number 723 to list of science objects plFiberPlate : adding sky number 411 to list of science objects plFiberPlate : adding sky number 475 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : adding sky number 711 to list of science objects plFiberPlate : adding sky number 404 to list of science objects plFiberPlate : adding sky number 380 to list of science objects plFiberPlate : adding sky number 696 to list of science objects plFiberPlate : adding sky number 406 to list of science objects plFiberPlate : adding sky number 238 to list of science objects plFiberPlate : adding sky number 147 to list of science objects plFiberPlate : adding sky number 558 to list of science objects plFiberPlate : adding sky number 592 to list of science objects plFiberPlate : adding sky number 113 to list of science objects plFiberPlate : adding sky number 490 to list of science objects plFiberPlate : adding sky number 399 to list of science objects plFiberPlate : adding sky number 679 to list of science objects plFiberPlate : adding sky number 586 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 179 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 176 2 16 122 3 16 117 4 25 153 5 18 163 6 22 110 7 19 108 8 14 147 9 24 163 10 31 230 11 22 165 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 756 44 5 306 31 plFiberPlate : adding spectro-photo std with objId = 2141 40 6 136 29 plFiberPlate : adding spectro-photo std with objId = 2141 40 3 136 30 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 125 2 plFiberPlate : adding spectro-photo std with objId = 2141 40 3 123 18 plFiberPlate : adding spectro-photo std with objId = 2141 40 2 123 74 plFiberPlate : adding spectro-photo std with objId = 2141 40 5 122 69 plFiberPlate : adding spectro-photo std with objId = 2141 40 4 122 122 plFiberPlate : 148 possible sky positions to use as objects from a possible 807. plFiberPlate : 121 possible sky positions to use as objects from a possible 806. plFiberPlate : 71 possible sky positions to use as objects from a possible 805. plFiberPlate : 41 possible sky positions to use as objects from a possible 804. plFiberPlate : 47 possible sky positions to use as objects from a possible 803. plFiberPlate : 44 possible sky positions to use as objects from a possible 802. plFiberPlate : 56 possible sky positions to use as objects from a possible 801. plFiberPlate : 109 possible sky positions to use as objects from a possible 800. plFiberPlate : 92 possible sky positions to use as objects from a possible 799. plFiberPlate : 56 possible sky positions to use as objects from a possible 798. plFiberPlate : 34 possible sky positions to use as objects from a possible 797. plFiberPlate : 14 possible sky positions to use as objects from a possible 796. plFiberPlate : 23 possible sky positions to use as objects from a possible 795. plFiberPlate : 23 possible sky positions to use as objects from a possible 794. plFiberPlate : 20 possible sky positions to use as objects from a possible 793. plFiberPlate : 18 possible sky positions to use as objects from a possible 792. plFiberPlate : 99 possible sky positions to use as objects from a possible 791. plFiberPlate : 80 possible sky positions to use as objects from a possible 790. plFiberPlate : 51 possible sky positions to use as objects from a possible 789. plFiberPlate : 36 possible sky positions to use as objects from a possible 788. plFiberPlate : 22 possible sky positions to use as objects from a possible 787. plFiberPlate : 23 possible sky positions to use as objects from a possible 786. plFiberPlate : 24 possible sky positions to use as objects from a possible 785. plFiberPlate : 38 possible sky positions to use as objects from a possible 784. plFiberPlate : 6 possible sky positions to use as objects from a possible 783. plFiberPlate : 65 possible sky positions to use as objects from a possible 782. plFiberPlate : 57 possible sky positions to use as objects from a possible 781. plFiberPlate : 31 possible sky positions to use as objects from a possible 780. plFiberPlate : 20 possible sky positions to use as objects from a possible 779. plFiberPlate : 12 possible sky positions to use as objects from a possible 778. plFiberPlate : 17 possible sky positions to use as objects from a possible 777. plFiberPlate : 10 possible sky positions to use as objects from a possible 776. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 697 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2568.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2569.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.2/plOverlay-2569.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sat Aug 5 15:32:18 CDT 2006 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 10 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2560.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2560.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.0424,-10.9867) and (-0.03,-11.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2560.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2561.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2561.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2561.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 148 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2562.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2562.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2562.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 143 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2563.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2563.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2563.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 187 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2564.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.1447,11.8385) and (-3.27,12.36) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2564.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4349,5.1444) and (12.19,2.80) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2564.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 139 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2565.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.8478,-11.5522) and (1.29,-12.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2565.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2565.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.1908,11.3381) and (-12.20,0.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 206 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2566.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.5540,11.9238) and (-3.39,12.21) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2566.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2566.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2567.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2567.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2567.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 30 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2568.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2568.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2568.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 35 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2569.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2569.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.2/plFanuc-2569.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sat Aug 5 15:32:51 CDT 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x9447344 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 10 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2560 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2561 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2562 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 810 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2563 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 805 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2564 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 849 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2565 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 801 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2566 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 868 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2567 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2568 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 692 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2569 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 697 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sat Aug 5 15:33:07 CDT 2006 Begin running "plateEnder dr2006.08.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.08.2 -morePipes 1" failed. PS: Read file for stderr output of this job.