Sender: LSF System Subject: Job 121442: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sat Nov 25 15:27:21 2006 Results reported at Sat Nov 25 15:32:47 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.11.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 217.57 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Sat Nov 25 15:27:43 CST 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sat Nov 25 15:28:27 CST 2006 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_6d/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/sdss/ups/prd/kentools/v2_7/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/xpa/v2_1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v4_0b9/Linux/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v18_80/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Sat Nov 25 15:28:28 CST 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v18_80/NULL DS9_DIR=/sdss/ups/prd/ds9/v4_0b9/Linux DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_6d/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_7/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_6/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Sat Nov 25 15:28:30 CST 2006 Begin running plate --------------------------------------------------------------- Sat Nov 25 15:28:30 CST 2006 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_80/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_80/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xa113ad4 makePlates : beginning loop over plObs chain; makePlates : making 26 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1833.par makePlates : plateInfo struct for plate 2641 : (h4).mjd 54173 (h4).raCen 203.2685 (h4).decCen 19.01526 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.268 19.015 203.268 20.515 plMakePlateFromTile : mjd of obs : 54173.729385 Observed HA/dec of plate center, fiducial point (deg) : -23.002 18.979 -23.002 20.478 The rotation angle of the fid. point is 51.598267 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1834.par makePlates : plateInfo struct for plate 2642 : (h4).mjd 54173 (h4).raCen 205.1459 (h4).decCen 18.76025 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.146 18.760 205.146 20.260 plMakePlateFromTile : mjd of obs : 54173.729042 Observed HA/dec of plate center, fiducial point (deg) : -25.002 18.724 -25.002 20.224 The rotation angle of the fid. point is 52.946823 plMakePlateFromTile : beginning loop over 1349 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1835.par makePlates : plateInfo struct for plate 2643 : (h4).mjd 54173 (h4).raCen 180.5516 (h4).decCen 22.39739 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.552 22.397 180.552 23.897 plMakePlateFromTile : mjd of obs : 54173.647075 Observed HA/dec of plate center, fiducial point (deg) : -30.002 22.359 -30.002 23.858 The rotation angle of the fid. point is 61.981725 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (104.87, -204.17, 6.2) 0 0 0 0 0 and (104.67, -204.28, 7.5) checkLTHo : distance = 0.230, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(104.67, -204.28, 7.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1836.par makePlates : plateInfo struct for plate 2644 : (h4).mjd 54173 (h4).raCen 182.4994 (h4).decCen 22.43848 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.499 22.438 182.499 23.938 plMakePlateFromTile : mjd of obs : 54173.646927 Observed HA/dec of plate center, fiducial point (deg) : -32.002 22.400 -32.002 23.899 The rotation angle of the fid. point is 62.814082 plMakePlateFromTile : beginning loop over 1348 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1837.par makePlates : plateInfo struct for plate 2645 : (h4).mjd 54173 (h4).raCen 184.3445 (h4).decCen 22.46873 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.345 22.469 184.345 23.969 plMakePlateFromTile : mjd of obs : 54173.688060 Observed HA/dec of plate center, fiducial point (deg) : -19.002 22.429 -19.002 23.929 The rotation angle of the fid. point is 54.239973 plMakePlateFromTile : beginning loop over 1360 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1838.par makePlates : plateInfo struct for plate 2646 : (h4).mjd 54173 (h4).raCen 186.257 (h4).decCen 22.53126 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.257 22.531 186.257 24.031 plMakePlateFromTile : mjd of obs : 54173.687815 Observed HA/dec of plate center, fiducial point (deg) : -21.002 22.492 -21.002 23.991 The rotation angle of the fid. point is 56.430638 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1839.par makePlates : plateInfo struct for plate 2647 : (h4).mjd 54173 (h4).raCen 188.48 (h4).decCen 22.48917 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.480 22.489 188.480 23.989 plMakePlateFromTile : mjd of obs : 54173.688429 Observed HA/dec of plate center, fiducial point (deg) : -23.002 22.450 -23.002 23.949 The rotation angle of the fid. point is 58.053620 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1840.par makePlates : plateInfo struct for plate 2648 : (h4).mjd 54173 (h4).raCen 191.1184 (h4).decCen 22.48361 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.118 22.484 191.118 23.984 plMakePlateFromTile : mjd of obs : 54173.687422 Observed HA/dec of plate center, fiducial point (deg) : -26.002 22.444 -26.002 23.944 The rotation angle of the fid. point is 60.101012 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1841.par makePlates : plateInfo struct for plate 2649 : (h4).mjd 54173 (h4).raCen 193.598 (h4).decCen 22.26516 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.598 22.265 193.598 23.765 plMakePlateFromTile : mjd of obs : 54173.688747 Observed HA/dec of plate center, fiducial point (deg) : -28.002 22.226 -28.002 23.726 The rotation angle of the fid. point is 60.818624 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1842.par makePlates : plateInfo struct for plate 2650 : (h4).mjd 54173 (h4).raCen 196.3466 (h4).decCen 22.1209 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.347 22.121 196.347 23.621 plMakePlateFromTile : mjd of obs : 54173.688045 Observed HA/dec of plate center, fiducial point (deg) : -31.002 22.083 -31.002 23.582 The rotation angle of the fid. point is 61.938333 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1843.par makePlates : plateInfo struct for plate 2651 : (h4).mjd 54173 (h4).raCen 198.7002 (h4).decCen 22.1266 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.700 22.127 198.700 23.627 plMakePlateFromTile : mjd of obs : 54173.689021 Observed HA/dec of plate center, fiducial point (deg) : -33.002 22.089 -33.002 23.588 The rotation angle of the fid. point is 62.673112 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1844.par makePlates : plateInfo struct for plate 2652 : (h4).mjd 54173 (h4).raCen 200.8406 (h4).decCen 21.80207 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.841 21.802 200.841 23.302 plMakePlateFromTile : mjd of obs : 54173.689406 Observed HA/dec of plate center, fiducial point (deg) : -35.002 21.765 -35.002 23.265 The rotation angle of the fid. point is 62.825677 plMakePlateFromTile : beginning loop over 1344 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1845.par makePlates : plateInfo struct for plate 2653 : (h4).mjd 54173 (h4).raCen 203.0431 (h4).decCen 21.54567 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.043 21.546 203.043 23.046 plMakePlateFromTile : mjd of obs : 54173.728759 Observed HA/dec of plate center, fiducial point (deg) : -23.002 21.508 -23.002 23.008 The rotation angle of the fid. point is 56.182856 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1846.par makePlates : plateInfo struct for plate 2654 : (h4).mjd 54173 (h4).raCen 205.3199 (h4).decCen 21.21476 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.320 21.215 205.320 22.715 plMakePlateFromTile : mjd of obs : 54173.729522 Observed HA/dec of plate center, fiducial point (deg) : -25.002 21.178 -25.002 22.678 The rotation angle of the fid. point is 57.120660 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1847.par makePlates : plateInfo struct for plate 2655 : (h4).mjd 54173 (h4).raCen 180.3692 (h4).decCen 24.90079 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.369 24.901 180.369 26.401 plMakePlateFromTile : mjd of obs : 54173.646570 Observed HA/dec of plate center, fiducial point (deg) : -30.002 24.861 -30.002 26.361 The rotation angle of the fid. point is 66.236468 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1848.par makePlates : plateInfo struct for plate 2656 : (h4).mjd 54173 (h4).raCen 182.0138 (h4).decCen 24.99268 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.014 24.993 182.014 26.493 plMakePlateFromTile : mjd of obs : 54173.645582 Observed HA/dec of plate center, fiducial point (deg) : -32.002 24.953 -32.002 26.453 The rotation angle of the fid. point is 66.898111 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1849.par makePlates : plateInfo struct for plate 2657 : (h4).mjd 54173 (h4).raCen 183.9615 (h4).decCen 25.00835 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.962 25.008 183.962 26.508 plMakePlateFromTile : mjd of obs : 54173.689771 Observed HA/dec of plate center, fiducial point (deg) : -18.002 24.968 -18.002 26.467 The rotation angle of the fid. point is 59.461967 plMakePlateFromTile : beginning loop over 1335 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1850.par makePlates : plateInfo struct for plate 2658 : (h4).mjd 54173 (h4).raCen 185.908 (h4).decCen 25.15568 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 185.908 25.156 185.908 26.656 plMakePlateFromTile : mjd of obs : 54173.689619 Observed HA/dec of plate center, fiducial point (deg) : -20.002 25.115 -20.002 26.615 The rotation angle of the fid. point is 61.691582 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1851.par makePlates : plateInfo struct for plate 2659 : (h4).mjd 54173 (h4).raCen 188.1599 (h4).decCen 24.98581 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.160 24.986 188.160 26.486 plMakePlateFromTile : mjd of obs : 54173.687542 Observed HA/dec of plate center, fiducial point (deg) : -23.002 24.946 -23.002 26.445 The rotation angle of the fid. point is 63.399906 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1852.par makePlates : plateInfo struct for plate 2660 : (h4).mjd 54173 (h4).raCen 190.4319 (h4).decCen 24.94207 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.432 24.942 190.432 26.442 plMakePlateFromTile : mjd of obs : 54173.688291 Observed HA/dec of plate center, fiducial point (deg) : -25.002 24.902 -25.002 26.402 The rotation angle of the fid. point is 64.397952 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1853.par makePlates : plateInfo struct for plate 2661 : (h4).mjd 54173 (h4).raCen 193.0739 (h4).decCen 24.92891 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.074 24.929 193.074 26.429 plMakePlateFromTile : mjd of obs : 54173.687294 Observed HA/dec of plate center, fiducial point (deg) : -28.002 24.889 -28.002 26.389 The rotation angle of the fid. point is 65.635914 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1854.par makePlates : plateInfo struct for plate 2662 : (h4).mjd 54173 (h4).raCen 195.659 (h4).decCen 24.54763 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.659 24.548 195.659 26.048 plMakePlateFromTile : mjd of obs : 54173.688911 Observed HA/dec of plate center, fiducial point (deg) : -30.002 24.509 -30.002 26.008 The rotation angle of the fid. point is 65.603597 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1855.par makePlates : plateInfo struct for plate 2663 : (h4).mjd 54173 (h4).raCen 198.2142 (h4).decCen 24.57548 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.214 24.575 198.214 26.075 plMakePlateFromTile : mjd of obs : 54173.687674 Observed HA/dec of plate center, fiducial point (deg) : -33.002 24.537 -33.002 26.036 The rotation angle of the fid. point is 66.427002 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1856.par makePlates : plateInfo struct for plate 2664 : (h4).mjd 54173 (h4).raCen 200.8241 (h4).decCen 24.30056 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.824 24.301 200.824 25.801 plMakePlateFromTile : mjd of obs : 54173.689359 Observed HA/dec of plate center, fiducial point (deg) : -35.002 24.263 -35.002 25.762 The rotation angle of the fid. point is 66.397331 plMakePlateFromTile : beginning loop over 1331 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1857.par makePlates : plateInfo struct for plate 2665 : (h4).mjd 54173 (h4).raCen 203.2358 (h4).decCen 23.882 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.236 23.882 203.236 25.382 plMakePlateFromTile : mjd of obs : 54173.729291 Observed HA/dec of plate center, fiducial point (deg) : -23.002 23.844 -23.002 25.343 The rotation angle of the fid. point is 60.953576 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk153/complete//plPlugMapT-1858.par makePlates : plateInfo struct for plate 2666 : (h4).mjd 54173 (h4).raCen 205.7047 (h4).decCen 23.71893 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.705 23.719 205.705 25.219 plMakePlateFromTile : mjd of obs : 54173.730586 Observed HA/dec of plate center, fiducial point (deg) : -25.002 23.681 -25.002 25.181 The rotation angle of the fid. point is 61.879425 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sat Nov 25 15:29:15 CST 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_80/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_80/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 26 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2641.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 128 2 9 100 3 10 86 4 10 109 5 5 120 6 2 93 7 8 79 8 8 103 9 4 102 10 11 151 11 11 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5308 40 2 74 61 plFiberPlate : adding spectro-photo std with objId = 5308 40 3 69 25 plFiberPlate : adding spectro-photo std with objId = 5390 40 6 193 34 plFiberPlate : adding spectro-photo std with objId = 5314 40 5 175 90 plFiberPlate : adding spectro-photo std with objId = 5308 40 6 77 35 plFiberPlate : adding spectro-photo std with objId = 5314 40 6 175 59 plFiberPlate : adding spectro-photo std with objId = 5308 40 3 71 60 plFiberPlate : adding spectro-photo std with objId = 5308 40 1 83 71 plFiberPlate : 132 possible sky positions to use as objects from a possible 594. plFiberPlate : 74 possible sky positions to use as objects from a possible 593. plFiberPlate : 42 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 49 possible sky positions to use as objects from a possible 589. plFiberPlate : 64 possible sky positions to use as objects from a possible 588. plFiberPlate : 77 possible sky positions to use as objects from a possible 587. plFiberPlate : 50 possible sky positions to use as objects from a possible 586. plFiberPlate : 30 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 30 possible sky positions to use as objects from a possible 580. plFiberPlate : 18 possible sky positions to use as objects from a possible 579. plFiberPlate : 71 possible sky positions to use as objects from a possible 578. plFiberPlate : 48 possible sky positions to use as objects from a possible 577. plFiberPlate : 44 possible sky positions to use as objects from a possible 576. plFiberPlate : 23 possible sky positions to use as objects from a possible 575. plFiberPlate : 17 possible sky positions to use as objects from a possible 574. plFiberPlate : 6 possible sky positions to use as objects from a possible 573. plFiberPlate : 23 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 41 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : 11 possible sky positions to use as objects from a possible 566. plFiberPlate : 7 possible sky positions to use as objects from a possible 565. plFiberPlate : 2 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2641.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2641.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2642.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 125 2 17 102 3 7 98 4 11 109 5 9 119 6 4 91 7 3 73 8 9 98 9 3 111 10 17 148 11 15 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5314 40 1 185 89 plFiberPlate : adding spectro-photo std with objId = 5308 40 3 93 95 plFiberPlate : adding spectro-photo std with objId = 5314 40 4 183 6 plFiberPlate : adding spectro-photo std with objId = 5308 40 6 87 18 plFiberPlate : adding spectro-photo std with objId = 5314 40 3 174 39 plFiberPlate : adding spectro-photo std with objId = 5308 40 1 83 71 plFiberPlate : adding spectro-photo std with objId = 5314 40 5 187 108 plFiberPlate : adding spectro-photo std with objId = 5308 40 5 96 80 plFiberPlate : 129 possible sky positions to use as objects from a possible 591. plFiberPlate : 61 possible sky positions to use as objects from a possible 590. plFiberPlate : 45 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 35 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 58 possible sky positions to use as objects from a possible 584. plFiberPlate : 33 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 6 possible sky positions to use as objects from a possible 581. plFiberPlate : 7 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 12 possible sky positions to use as objects from a possible 578. plFiberPlate : 4 possible sky positions to use as objects from a possible 577. plFiberPlate : 37 possible sky positions to use as objects from a possible 576. plFiberPlate : 86 possible sky positions to use as objects from a possible 575. plFiberPlate : 74 possible sky positions to use as objects from a possible 574. plFiberPlate : 40 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 9 possible sky positions to use as objects from a possible 569. plFiberPlate : 9 possible sky positions to use as objects from a possible 568. plFiberPlate : 22 possible sky positions to use as objects from a possible 567. plFiberPlate : 44 possible sky positions to use as objects from a possible 566. plFiberPlate : 33 possible sky positions to use as objects from a possible 565. plFiberPlate : 16 possible sky positions to use as objects from a possible 564. plFiberPlate : 19 possible sky positions to use as objects from a possible 563. plFiberPlate : 4 possible sky positions to use as objects from a possible 562. plFiberPlate : 9 possible sky positions to use as objects from a possible 561. plFiberPlate : 5 possible sky positions to use as objects from a possible 560. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2641.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2642.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2642.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2643.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 115 2 7 88 3 4 99 4 9 135 5 5 130 6 5 104 7 10 101 8 9 115 9 7 132 10 2 148 11 6 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 327 44 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 442 11 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 327 34 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 329 10 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 438 62 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 318 84 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 323 72 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 437 26 plFiberPlate : 119 possible sky positions to use as objects from a possible 648. plFiberPlate : 70 possible sky positions to use as objects from a possible 647. plFiberPlate : 52 possible sky positions to use as objects from a possible 646. plFiberPlate : 38 possible sky positions to use as objects from a possible 645. plFiberPlate : 38 possible sky positions to use as objects from a possible 644. plFiberPlate : 22 possible sky positions to use as objects from a possible 643. plFiberPlate : 55 possible sky positions to use as objects from a possible 642. plFiberPlate : 82 possible sky positions to use as objects from a possible 641. plFiberPlate : 39 possible sky positions to use as objects from a possible 640. plFiberPlate : 28 possible sky positions to use as objects from a possible 639. plFiberPlate : 12 possible sky positions to use as objects from a possible 638. plFiberPlate : 13 possible sky positions to use as objects from a possible 637. plFiberPlate : 11 possible sky positions to use as objects from a possible 636. plFiberPlate : 8 possible sky positions to use as objects from a possible 635. plFiberPlate : 18 possible sky positions to use as objects from a possible 634. plFiberPlate : 22 possible sky positions to use as objects from a possible 633. plFiberPlate : 62 possible sky positions to use as objects from a possible 632. plFiberPlate : 28 possible sky positions to use as objects from a possible 631. plFiberPlate : 26 possible sky positions to use as objects from a possible 630. plFiberPlate : 24 possible sky positions to use as objects from a possible 629. plFiberPlate : 17 possible sky positions to use as objects from a possible 628. plFiberPlate : 23 possible sky positions to use as objects from a possible 627. plFiberPlate : 15 possible sky positions to use as objects from a possible 626. plFiberPlate : 11 possible sky positions to use as objects from a possible 625. plFiberPlate : 21 possible sky positions to use as objects from a possible 624. plFiberPlate : 57 possible sky positions to use as objects from a possible 623. plFiberPlate : 40 possible sky positions to use as objects from a possible 622. plFiberPlate : 26 possible sky positions to use as objects from a possible 621. plFiberPlate : 24 possible sky positions to use as objects from a possible 620. plFiberPlate : 10 possible sky positions to use as objects from a possible 619. plFiberPlate : 18 possible sky positions to use as objects from a possible 618. plFiberPlate : 26 possible sky positions to use as objects from a possible 617. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2642.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2643.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2643.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2644.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 131 2 10 104 3 6 112 4 6 121 5 13 126 6 11 113 7 7 98 8 8 115 9 8 116 10 8 172 11 6 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 448 14 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 446 28 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 454 17 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 336 37 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 340 35 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 451 64 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 342 26 plFiberPlate : adding spectro-photo std with objId = 5225 41 6 123 54 plFiberPlate : 126 possible sky positions to use as objects from a possible 647. plFiberPlate : 62 possible sky positions to use as objects from a possible 646. plFiberPlate : 33 possible sky positions to use as objects from a possible 645. plFiberPlate : 34 possible sky positions to use as objects from a possible 644. plFiberPlate : 33 possible sky positions to use as objects from a possible 643. plFiberPlate : 40 possible sky positions to use as objects from a possible 642. plFiberPlate : 33 possible sky positions to use as objects from a possible 641. plFiberPlate : 70 possible sky positions to use as objects from a possible 640. plFiberPlate : 35 possible sky positions to use as objects from a possible 639. plFiberPlate : 16 possible sky positions to use as objects from a possible 638. plFiberPlate : 3 possible sky positions to use as objects from a possible 637. plFiberPlate : 11 possible sky positions to use as objects from a possible 636. plFiberPlate : 12 possible sky positions to use as objects from a possible 635. plFiberPlate : 13 possible sky positions to use as objects from a possible 634. plFiberPlate : 23 possible sky positions to use as objects from a possible 633. plFiberPlate : 18 possible sky positions to use as objects from a possible 632. plFiberPlate : 77 possible sky positions to use as objects from a possible 631. plFiberPlate : 51 possible sky positions to use as objects from a possible 630. plFiberPlate : 49 possible sky positions to use as objects from a possible 629. plFiberPlate : 28 possible sky positions to use as objects from a possible 628. plFiberPlate : 14 possible sky positions to use as objects from a possible 627. plFiberPlate : 4 possible sky positions to use as objects from a possible 626. plFiberPlate : 23 possible sky positions to use as objects from a possible 625. plFiberPlate : 21 possible sky positions to use as objects from a possible 624. plFiberPlate : 22 possible sky positions to use as objects from a possible 623. plFiberPlate : 63 possible sky positions to use as objects from a possible 622. plFiberPlate : 38 possible sky positions to use as objects from a possible 621. plFiberPlate : 36 possible sky positions to use as objects from a possible 620. plFiberPlate : 22 possible sky positions to use as objects from a possible 619. plFiberPlate : 25 possible sky positions to use as objects from a possible 618. plFiberPlate : 21 possible sky positions to use as objects from a possible 617. plFiberPlate : 24 possible sky positions to use as objects from a possible 616. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2643.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2644.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2644.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2645.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 132 2 9 115 3 11 96 4 10 115 5 5 142 6 3 106 7 8 99 8 9 120 9 5 115 10 12 144 11 10 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 453 7 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 345 35 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 353 14 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 348 64 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 451 64 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 349 112 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 463 63 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 460 52 plFiberPlate : 118 possible sky positions to use as objects from a possible 653. plFiberPlate : 75 possible sky positions to use as objects from a possible 652. plFiberPlate : 52 possible sky positions to use as objects from a possible 651. plFiberPlate : 31 possible sky positions to use as objects from a possible 650. plFiberPlate : 25 possible sky positions to use as objects from a possible 649. plFiberPlate : 54 possible sky positions to use as objects from a possible 648. plFiberPlate : 67 possible sky positions to use as objects from a possible 647. plFiberPlate : 74 possible sky positions to use as objects from a possible 646. plFiberPlate : 29 possible sky positions to use as objects from a possible 645. plFiberPlate : 16 possible sky positions to use as objects from a possible 644. plFiberPlate : 5 possible sky positions to use as objects from a possible 643. plFiberPlate : 7 possible sky positions to use as objects from a possible 642. plFiberPlate : 13 possible sky positions to use as objects from a possible 641. plFiberPlate : 10 possible sky positions to use as objects from a possible 640. plFiberPlate : 15 possible sky positions to use as objects from a possible 639. plFiberPlate : 22 possible sky positions to use as objects from a possible 638. plFiberPlate : 73 possible sky positions to use as objects from a possible 637. plFiberPlate : 60 possible sky positions to use as objects from a possible 636. plFiberPlate : 29 possible sky positions to use as objects from a possible 635. plFiberPlate : 14 possible sky positions to use as objects from a possible 634. plFiberPlate : 3 possible sky positions to use as objects from a possible 633. plFiberPlate : 4 possible sky positions to use as objects from a possible 632. plFiberPlate : 19 possible sky positions to use as objects from a possible 631. plFiberPlate : 17 possible sky positions to use as objects from a possible 630. plFiberPlate : 23 possible sky positions to use as objects from a possible 629. plFiberPlate : 56 possible sky positions to use as objects from a possible 628. plFiberPlate : 43 possible sky positions to use as objects from a possible 627. plFiberPlate : 22 possible sky positions to use as objects from a possible 626. plFiberPlate : 13 possible sky positions to use as objects from a possible 625. plFiberPlate : 20 possible sky positions to use as objects from a possible 624. plFiberPlate : 20 possible sky positions to use as objects from a possible 623. plFiberPlate : 26 possible sky positions to use as objects from a possible 622. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2644.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2645.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2645.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2646.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 133 2 8 94 3 6 90 4 8 116 5 10 130 6 8 101 7 4 93 8 5 121 9 6 113 10 14 156 11 7 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 465 31 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 353 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 471 2 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 478 65 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 355 63 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 349 112 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 212 72 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 359 33 plFiberPlate : 139 possible sky positions to use as objects from a possible 637. plFiberPlate : 38 possible sky positions to use as objects from a possible 636. plFiberPlate : 22 possible sky positions to use as objects from a possible 635. plFiberPlate : 33 possible sky positions to use as objects from a possible 634. plFiberPlate : 21 possible sky positions to use as objects from a possible 633. plFiberPlate : 34 possible sky positions to use as objects from a possible 632. plFiberPlate : 44 possible sky positions to use as objects from a possible 631. plFiberPlate : 46 possible sky positions to use as objects from a possible 630. plFiberPlate : 66 possible sky positions to use as objects from a possible 629. plFiberPlate : 56 possible sky positions to use as objects from a possible 628. plFiberPlate : 28 possible sky positions to use as objects from a possible 627. plFiberPlate : 16 possible sky positions to use as objects from a possible 626. plFiberPlate : 18 possible sky positions to use as objects from a possible 625. plFiberPlate : 22 possible sky positions to use as objects from a possible 624. plFiberPlate : 17 possible sky positions to use as objects from a possible 623. plFiberPlate : 27 possible sky positions to use as objects from a possible 622. plFiberPlate : 95 possible sky positions to use as objects from a possible 621. plFiberPlate : 78 possible sky positions to use as objects from a possible 620. plFiberPlate : 40 possible sky positions to use as objects from a possible 619. plFiberPlate : 11 possible sky positions to use as objects from a possible 618. plFiberPlate : 4 possible sky positions to use as objects from a possible 617. plFiberPlate : 7 possible sky positions to use as objects from a possible 616. plFiberPlate : 22 possible sky positions to use as objects from a possible 615. plFiberPlate : 25 possible sky positions to use as objects from a possible 614. plFiberPlate : 24 possible sky positions to use as objects from a possible 613. plFiberPlate : 41 possible sky positions to use as objects from a possible 612. plFiberPlate : 30 possible sky positions to use as objects from a possible 611. plFiberPlate : 16 possible sky positions to use as objects from a possible 610. plFiberPlate : 10 possible sky positions to use as objects from a possible 609. plFiberPlate : 9 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2645.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2646.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2646.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2647.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 113 2 5 93 3 6 94 4 5 108 5 5 133 6 5 107 7 6 87 8 3 106 9 6 102 10 10 144 11 9 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 233 64 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 492 94 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 367 41 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 370 69 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 479 19 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 372 94 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 371 38 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 371 2 plFiberPlate : 119 possible sky positions to use as objects from a possible 611. plFiberPlate : 81 possible sky positions to use as objects from a possible 610. plFiberPlate : 38 possible sky positions to use as objects from a possible 609. plFiberPlate : 31 possible sky positions to use as objects from a possible 608. plFiberPlate : 32 possible sky positions to use as objects from a possible 607. plFiberPlate : 29 possible sky positions to use as objects from a possible 606. plFiberPlate : 41 possible sky positions to use as objects from a possible 605. plFiberPlate : 93 possible sky positions to use as objects from a possible 604. plFiberPlate : 64 possible sky positions to use as objects from a possible 603. plFiberPlate : 45 possible sky positions to use as objects from a possible 602. plFiberPlate : 19 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 7 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 69 possible sky positions to use as objects from a possible 595. plFiberPlate : 58 possible sky positions to use as objects from a possible 594. plFiberPlate : 33 possible sky positions to use as objects from a possible 593. plFiberPlate : 22 possible sky positions to use as objects from a possible 592. plFiberPlate : 5 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 16 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 31 possible sky positions to use as objects from a possible 587. plFiberPlate : 53 possible sky positions to use as objects from a possible 586. plFiberPlate : 46 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 12 possible sky positions to use as objects from a possible 583. plFiberPlate : 4 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 15 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2646.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2647.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2647.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2648.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 128 2 6 100 3 3 85 4 6 102 5 10 122 6 6 103 7 8 95 8 7 113 9 7 115 10 13 149 11 8 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 386 93 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 506 40 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 497 7 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 391 70 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 506 52 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 386 44 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 383 35 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 497 91 plFiberPlate : 121 possible sky positions to use as objects from a possible 606. plFiberPlate : 80 possible sky positions to use as objects from a possible 605. plFiberPlate : 64 possible sky positions to use as objects from a possible 604. plFiberPlate : 34 possible sky positions to use as objects from a possible 603. plFiberPlate : 27 possible sky positions to use as objects from a possible 602. plFiberPlate : 62 possible sky positions to use as objects from a possible 601. plFiberPlate : 50 possible sky positions to use as objects from a possible 600. plFiberPlate : 90 possible sky positions to use as objects from a possible 599. plFiberPlate : 57 possible sky positions to use as objects from a possible 598. plFiberPlate : 31 possible sky positions to use as objects from a possible 597. plFiberPlate : 15 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 9 possible sky positions to use as objects from a possible 593. plFiberPlate : 22 possible sky positions to use as objects from a possible 592. plFiberPlate : 20 possible sky positions to use as objects from a possible 591. plFiberPlate : 73 possible sky positions to use as objects from a possible 590. plFiberPlate : 50 possible sky positions to use as objects from a possible 589. plFiberPlate : 44 possible sky positions to use as objects from a possible 588. plFiberPlate : 33 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 6 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 37 possible sky positions to use as objects from a possible 582. plFiberPlate : 36 possible sky positions to use as objects from a possible 581. plFiberPlate : 42 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : 3 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 22 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2647.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2648.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2648.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2649.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 115 2 4 102 3 7 89 4 8 114 5 9 137 6 9 92 7 7 85 8 10 95 9 5 94 10 9 146 11 6 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 522 25 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 403 38 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 403 39 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 395 9 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 512 89 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 520 8 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 410 37 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 399 24 plFiberPlate : 111 possible sky positions to use as objects from a possible 602. plFiberPlate : 78 possible sky positions to use as objects from a possible 601. plFiberPlate : 45 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 42 possible sky positions to use as objects from a possible 597. plFiberPlate : 34 possible sky positions to use as objects from a possible 596. plFiberPlate : 79 possible sky positions to use as objects from a possible 595. plFiberPlate : 43 possible sky positions to use as objects from a possible 594. plFiberPlate : 40 possible sky positions to use as objects from a possible 593. plFiberPlate : 17 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 15 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 62 possible sky positions to use as objects from a possible 586. plFiberPlate : 44 possible sky positions to use as objects from a possible 585. plFiberPlate : 26 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 7 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 60 possible sky positions to use as objects from a possible 577. plFiberPlate : 35 possible sky positions to use as objects from a possible 576. plFiberPlate : 7 possible sky positions to use as objects from a possible 575. plFiberPlate : 6 possible sky positions to use as objects from a possible 574. plFiberPlate : 18 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 5 possible sky positions to use as objects from a possible 571. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2648.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2649.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2649.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2650.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 130 2 0 97 3 4 88 4 12 103 5 18 130 6 4 94 7 8 92 8 6 115 9 12 100 10 5 150 11 3 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 539 37 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 528 48 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 535 78 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 416 28 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 426 40 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 413 29 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 532 47 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 535 67 plFiberPlate : 118 possible sky positions to use as objects from a possible 619. plFiberPlate : 88 possible sky positions to use as objects from a possible 618. plFiberPlate : 42 possible sky positions to use as objects from a possible 617. plFiberPlate : 21 possible sky positions to use as objects from a possible 616. plFiberPlate : 30 possible sky positions to use as objects from a possible 615. plFiberPlate : 35 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 92 possible sky positions to use as objects from a possible 612. plFiberPlate : 63 possible sky positions to use as objects from a possible 611. plFiberPlate : 35 possible sky positions to use as objects from a possible 610. plFiberPlate : 26 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 14 possible sky positions to use as objects from a possible 607. plFiberPlate : 18 possible sky positions to use as objects from a possible 606. plFiberPlate : 24 possible sky positions to use as objects from a possible 605. plFiberPlate : 28 possible sky positions to use as objects from a possible 604. plFiberPlate : 81 possible sky positions to use as objects from a possible 603. plFiberPlate : 66 possible sky positions to use as objects from a possible 602. plFiberPlate : 44 possible sky positions to use as objects from a possible 601. plFiberPlate : 35 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 12 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 31 possible sky positions to use as objects from a possible 595. plFiberPlate : 56 possible sky positions to use as objects from a possible 594. plFiberPlate : 37 possible sky positions to use as objects from a possible 593. plFiberPlate : 26 possible sky positions to use as objects from a possible 592. plFiberPlate : 18 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 19 possible sky positions to use as objects from a possible 589. plFiberPlate : 24 possible sky positions to use as objects from a possible 588. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2649.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2650.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2650.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2651.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 116 2 5 86 3 9 79 4 8 106 5 6 124 6 9 94 7 7 93 8 9 102 9 8 102 10 11 144 11 10 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 436 64 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 547 69 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 442 8 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 439 52 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 191 29 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 440 29 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 424 84 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 439 6 plFiberPlate : 121 possible sky positions to use as objects from a possible 596. plFiberPlate : 65 possible sky positions to use as objects from a possible 595. plFiberPlate : 42 possible sky positions to use as objects from a possible 594. plFiberPlate : 36 possible sky positions to use as objects from a possible 593. plFiberPlate : 26 possible sky positions to use as objects from a possible 592. plFiberPlate : 52 possible sky positions to use as objects from a possible 591. plFiberPlate : 36 possible sky positions to use as objects from a possible 590. plFiberPlate : 95 possible sky positions to use as objects from a possible 589. plFiberPlate : 63 possible sky positions to use as objects from a possible 588. plFiberPlate : 42 possible sky positions to use as objects from a possible 587. plFiberPlate : 31 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 18 possible sky positions to use as objects from a possible 583. plFiberPlate : 17 possible sky positions to use as objects from a possible 582. plFiberPlate : 28 possible sky positions to use as objects from a possible 581. plFiberPlate : 73 possible sky positions to use as objects from a possible 580. plFiberPlate : 62 possible sky positions to use as objects from a possible 579. plFiberPlate : 32 possible sky positions to use as objects from a possible 578. plFiberPlate : 19 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 9 possible sky positions to use as objects from a possible 572. plFiberPlate : 53 possible sky positions to use as objects from a possible 571. plFiberPlate : 36 possible sky positions to use as objects from a possible 570. plFiberPlate : 26 possible sky positions to use as objects from a possible 569. plFiberPlate : 29 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 8 possible sky positions to use as objects from a possible 566. plFiberPlate : 21 possible sky positions to use as objects from a possible 565. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2650.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2651.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2651.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2652.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 147 2 3 112 3 2 88 4 8 102 5 7 128 6 5 94 7 5 88 8 7 120 9 2 108 10 7 147 11 3 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 446 26 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 439 52 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 556 56 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 555 23 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 448 53 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 440 29 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 448 17 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 439 6 plFiberPlate : 105 possible sky positions to use as objects from a possible 636. plFiberPlate : 78 possible sky positions to use as objects from a possible 635. plFiberPlate : 56 possible sky positions to use as objects from a possible 634. plFiberPlate : 32 possible sky positions to use as objects from a possible 633. plFiberPlate : 40 possible sky positions to use as objects from a possible 632. plFiberPlate : 26 possible sky positions to use as objects from a possible 631. plFiberPlate : 49 possible sky positions to use as objects from a possible 630. plFiberPlate : 67 possible sky positions to use as objects from a possible 629. plFiberPlate : 44 possible sky positions to use as objects from a possible 628. plFiberPlate : 26 possible sky positions to use as objects from a possible 627. plFiberPlate : 20 possible sky positions to use as objects from a possible 626. plFiberPlate : 10 possible sky positions to use as objects from a possible 625. plFiberPlate : 5 possible sky positions to use as objects from a possible 624. plFiberPlate : 13 possible sky positions to use as objects from a possible 623. plFiberPlate : 32 possible sky positions to use as objects from a possible 622. plFiberPlate : 34 possible sky positions to use as objects from a possible 621. plFiberPlate : 78 possible sky positions to use as objects from a possible 620. plFiberPlate : 55 possible sky positions to use as objects from a possible 619. plFiberPlate : 22 possible sky positions to use as objects from a possible 618. plFiberPlate : 15 possible sky positions to use as objects from a possible 617. plFiberPlate : 5 possible sky positions to use as objects from a possible 616. plFiberPlate : 7 possible sky positions to use as objects from a possible 615. plFiberPlate : 18 possible sky positions to use as objects from a possible 614. plFiberPlate : 17 possible sky positions to use as objects from a possible 613. plFiberPlate : 20 possible sky positions to use as objects from a possible 612. plFiberPlate : 57 possible sky positions to use as objects from a possible 611. plFiberPlate : 30 possible sky positions to use as objects from a possible 610. plFiberPlate : 23 possible sky positions to use as objects from a possible 609. plFiberPlate : 16 possible sky positions to use as objects from a possible 608. plFiberPlate : 14 possible sky positions to use as objects from a possible 607. plFiberPlate : 17 possible sky positions to use as objects from a possible 606. plFiberPlate : 24 possible sky positions to use as objects from a possible 605. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2651.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2652.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2652.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2653.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 125 2 5 94 3 4 87 4 4 110 5 12 122 6 11 83 7 12 93 8 6 110 9 12 113 10 8 153 11 5 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 584 29 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 455 40 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 572 61 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 458 10 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 463 14 plFiberPlate : adding spectro-photo std with objId = 5308 40 6 77 35 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 454 62 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 583 52 plFiberPlate : 108 possible sky positions to use as objects from a possible 616. plFiberPlate : 74 possible sky positions to use as objects from a possible 615. plFiberPlate : 53 possible sky positions to use as objects from a possible 614. plFiberPlate : 40 possible sky positions to use as objects from a possible 613. plFiberPlate : 42 possible sky positions to use as objects from a possible 612. plFiberPlate : 22 possible sky positions to use as objects from a possible 611. plFiberPlate : 48 possible sky positions to use as objects from a possible 610. plFiberPlate : 87 possible sky positions to use as objects from a possible 609. plFiberPlate : 60 possible sky positions to use as objects from a possible 608. plFiberPlate : 28 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 18 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 22 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 91 possible sky positions to use as objects from a possible 600. plFiberPlate : 57 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 20 possible sky positions to use as objects from a possible 592. plFiberPlate : 41 possible sky positions to use as objects from a possible 591. plFiberPlate : 25 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2652.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2653.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2653.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2654.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 130 2 5 85 3 8 78 4 12 97 5 12 139 6 7 112 7 10 91 8 6 99 9 6 125 10 8 139 11 7 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 477 7 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 591 13 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 474 47 plFiberPlate : adding spectro-photo std with objId = 5308 40 6 87 18 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 481 65 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 469 48 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 479 9 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 583 52 plFiberPlate : 94 possible sky positions to use as objects from a possible 611. plFiberPlate : 73 possible sky positions to use as objects from a possible 610. plFiberPlate : 42 possible sky positions to use as objects from a possible 609. plFiberPlate : 26 possible sky positions to use as objects from a possible 608. plFiberPlate : 37 possible sky positions to use as objects from a possible 607. plFiberPlate : 23 possible sky positions to use as objects from a possible 606. plFiberPlate : 28 possible sky positions to use as objects from a possible 605. plFiberPlate : 80 possible sky positions to use as objects from a possible 604. plFiberPlate : 45 possible sky positions to use as objects from a possible 603. plFiberPlate : 34 possible sky positions to use as objects from a possible 602. plFiberPlate : 25 possible sky positions to use as objects from a possible 601. plFiberPlate : 19 possible sky positions to use as objects from a possible 600. plFiberPlate : 12 possible sky positions to use as objects from a possible 599. plFiberPlate : 25 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 36 possible sky positions to use as objects from a possible 596. plFiberPlate : 105 possible sky positions to use as objects from a possible 595. plFiberPlate : 63 possible sky positions to use as objects from a possible 594. plFiberPlate : 41 possible sky positions to use as objects from a possible 593. plFiberPlate : 18 possible sky positions to use as objects from a possible 592. plFiberPlate : 18 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : 63 possible sky positions to use as objects from a possible 586. plFiberPlate : 36 possible sky positions to use as objects from a possible 585. plFiberPlate : 24 possible sky positions to use as objects from a possible 584. plFiberPlate : 25 possible sky positions to use as objects from a possible 583. plFiberPlate : 19 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2653.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2654.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2654.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2655.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 119 2 9 91 3 7 106 4 10 133 5 5 124 6 4 91 7 6 97 8 5 101 9 5 93 10 5 155 11 6 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 72 62 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 185 76 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 73 32 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 182 21 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 79 68 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 183 120 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 82 7 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 76 26 plFiberPlate : 86 possible sky positions to use as objects from a possible 619. plFiberPlate : 57 possible sky positions to use as objects from a possible 618. plFiberPlate : 31 possible sky positions to use as objects from a possible 617. plFiberPlate : 25 possible sky positions to use as objects from a possible 616. plFiberPlate : 17 possible sky positions to use as objects from a possible 615. plFiberPlate : 37 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 64 possible sky positions to use as objects from a possible 612. plFiberPlate : 36 possible sky positions to use as objects from a possible 611. plFiberPlate : 34 possible sky positions to use as objects from a possible 610. plFiberPlate : 21 possible sky positions to use as objects from a possible 609. plFiberPlate : 16 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : 19 possible sky positions to use as objects from a possible 606. plFiberPlate : 32 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 27 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 12 possible sky positions to use as objects from a possible 600. plFiberPlate : 6 possible sky positions to use as objects from a possible 599. plFiberPlate : 28 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 6 possible sky positions to use as objects from a possible 595. plFiberPlate : 31 possible sky positions to use as objects from a possible 594. plFiberPlate : 23 possible sky positions to use as objects from a possible 593. plFiberPlate : 18 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 16 possible sky positions to use as objects from a possible 589. plFiberPlate : 24 possible sky positions to use as objects from a possible 588. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2654.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2655.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2655.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2656.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 126 2 6 98 3 4 83 4 3 109 5 7 130 6 9 101 7 7 79 8 13 98 9 6 105 10 5 148 11 5 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 80 17 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 185 91 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 87 59 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 183 120 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 191 25 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 196 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 82 7 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 191 95 plFiberPlate : 120 possible sky positions to use as objects from a possible 605. plFiberPlate : 73 possible sky positions to use as objects from a possible 604. plFiberPlate : 49 possible sky positions to use as objects from a possible 603. plFiberPlate : 33 possible sky positions to use as objects from a possible 602. plFiberPlate : 27 possible sky positions to use as objects from a possible 601. plFiberPlate : 52 possible sky positions to use as objects from a possible 600. plFiberPlate : 66 possible sky positions to use as objects from a possible 599. plFiberPlate : 91 possible sky positions to use as objects from a possible 598. plFiberPlate : 71 possible sky positions to use as objects from a possible 597. plFiberPlate : 27 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 28 possible sky positions to use as objects from a possible 590. plFiberPlate : 55 possible sky positions to use as objects from a possible 589. plFiberPlate : 47 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 2 possible sky positions to use as objects from a possible 585. plFiberPlate : 9 possible sky positions to use as objects from a possible 584. plFiberPlate : 14 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 13 possible sky positions to use as objects from a possible 581. plFiberPlate : 78 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 6 possible sky positions to use as objects from a possible 577. plFiberPlate : 7 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2655.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2656.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2656.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2657.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 123 2 2 100 3 3 89 4 2 125 5 10 128 6 4 94 7 3 88 8 6 103 9 4 104 10 7 152 11 5 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 207 2 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 105 10 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 97 128 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 208 51 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 196 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 2 202 77 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 100 96 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 93 56 plFiberPlate : 136 possible sky positions to use as objects from a possible 629. plFiberPlate : 60 possible sky positions to use as objects from a possible 628. plFiberPlate : 38 possible sky positions to use as objects from a possible 627. plFiberPlate : 20 possible sky positions to use as objects from a possible 626. plFiberPlate : 36 possible sky positions to use as objects from a possible 625. plFiberPlate : 45 possible sky positions to use as objects from a possible 624. plFiberPlate : 57 possible sky positions to use as objects from a possible 623. plFiberPlate : 87 possible sky positions to use as objects from a possible 622. plFiberPlate : 67 possible sky positions to use as objects from a possible 621. plFiberPlate : 39 possible sky positions to use as objects from a possible 620. plFiberPlate : 18 possible sky positions to use as objects from a possible 619. plFiberPlate : 22 possible sky positions to use as objects from a possible 618. plFiberPlate : 15 possible sky positions to use as objects from a possible 617. plFiberPlate : 11 possible sky positions to use as objects from a possible 616. plFiberPlate : 19 possible sky positions to use as objects from a possible 615. plFiberPlate : 22 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 54 possible sky positions to use as objects from a possible 612. plFiberPlate : 37 possible sky positions to use as objects from a possible 611. plFiberPlate : 21 possible sky positions to use as objects from a possible 610. plFiberPlate : 13 possible sky positions to use as objects from a possible 609. plFiberPlate : 15 possible sky positions to use as objects from a possible 608. plFiberPlate : 16 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 14 possible sky positions to use as objects from a possible 605. plFiberPlate : 38 possible sky positions to use as objects from a possible 604. plFiberPlate : 25 possible sky positions to use as objects from a possible 603. plFiberPlate : 19 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2656.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2657.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2657.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2658.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 7 98 3 7 88 4 13 101 5 6 127 6 3 108 7 5 85 8 6 90 9 3 102 10 14 138 11 9 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 108 36 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 116 15 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 213 40 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 221 75 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 212 72 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 204 84 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 105 54 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 100 96 plFiberPlate : 120 possible sky positions to use as objects from a possible 598. plFiberPlate : 49 possible sky positions to use as objects from a possible 597. plFiberPlate : 37 possible sky positions to use as objects from a possible 596. plFiberPlate : 22 possible sky positions to use as objects from a possible 595. plFiberPlate : 36 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 50 possible sky positions to use as objects from a possible 592. plFiberPlate : 73 possible sky positions to use as objects from a possible 591. plFiberPlate : 49 possible sky positions to use as objects from a possible 590. plFiberPlate : 25 possible sky positions to use as objects from a possible 589. plFiberPlate : 18 possible sky positions to use as objects from a possible 588. plFiberPlate : 11 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 24 possible sky positions to use as objects from a possible 585. plFiberPlate : 8 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 69 possible sky positions to use as objects from a possible 582. plFiberPlate : 32 possible sky positions to use as objects from a possible 581. plFiberPlate : 14 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 2 possible sky positions to use as objects from a possible 578. plFiberPlate : 4 possible sky positions to use as objects from a possible 577. plFiberPlate : 8 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 60 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 9 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 5 possible sky positions to use as objects from a possible 569. plFiberPlate : 13 possible sky positions to use as objects from a possible 568. plFiberPlate : 7 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 684 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2657.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2658.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2658.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2659.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 114 2 5 96 3 5 95 4 6 108 5 2 113 6 0 96 7 1 95 8 4 107 9 4 110 10 13 142 11 9 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 121 30 plFiberPlate : adding spectro-photo std with objId = 5224 40 2 222 87 plFiberPlate : adding spectro-photo std with objId = 5116 40 3 114 9 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 125 57 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 224 69 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 225 123 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 221 75 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 124 10 plFiberPlate : 112 possible sky positions to use as objects from a possible 609. plFiberPlate : 78 possible sky positions to use as objects from a possible 608. plFiberPlate : 47 possible sky positions to use as objects from a possible 607. plFiberPlate : 31 possible sky positions to use as objects from a possible 606. plFiberPlate : 56 possible sky positions to use as objects from a possible 605. plFiberPlate : 40 possible sky positions to use as objects from a possible 604. plFiberPlate : 42 possible sky positions to use as objects from a possible 603. plFiberPlate : 75 possible sky positions to use as objects from a possible 602. plFiberPlate : 55 possible sky positions to use as objects from a possible 601. plFiberPlate : 18 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 3 possible sky positions to use as objects from a possible 596. plFiberPlate : 33 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 52 possible sky positions to use as objects from a possible 593. plFiberPlate : 57 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 16 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 20 possible sky positions to use as objects from a possible 586. plFiberPlate : 18 possible sky positions to use as objects from a possible 585. plFiberPlate : 40 possible sky positions to use as objects from a possible 584. plFiberPlate : 40 possible sky positions to use as objects from a possible 583. plFiberPlate : 23 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 23 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2658.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2659.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2659.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2660.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 125 2 6 104 3 3 93 4 3 114 5 5 113 6 5 82 7 8 85 8 11 98 9 5 94 10 8 157 11 8 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 2 245 9 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 129 31 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 246 10 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 243 51 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 383 35 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 131 113 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 135 21 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 244 60 plFiberPlate : 122 possible sky positions to use as objects from a possible 596. plFiberPlate : 91 possible sky positions to use as objects from a possible 595. plFiberPlate : 53 possible sky positions to use as objects from a possible 594. plFiberPlate : 29 possible sky positions to use as objects from a possible 593. plFiberPlate : 46 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : 86 possible sky positions to use as objects from a possible 589. plFiberPlate : 60 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 9 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 26 possible sky positions to use as objects from a possible 581. plFiberPlate : 72 possible sky positions to use as objects from a possible 580. plFiberPlate : 34 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 10 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 5 possible sky positions to use as objects from a possible 575. plFiberPlate : 8 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 28 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 5 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 10 possible sky positions to use as objects from a possible 565. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2659.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2660.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2660.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2661.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 130 2 4 105 3 4 86 4 7 105 5 9 114 6 6 112 7 5 88 8 6 100 9 8 107 10 7 151 11 5 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 152 76 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 147 53 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 250 6 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 255 99 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 262 71 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 152 53 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 262 43 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 264 75 plFiberPlate : 113 possible sky positions to use as objects from a possible 615. plFiberPlate : 70 possible sky positions to use as objects from a possible 614. plFiberPlate : 51 possible sky positions to use as objects from a possible 613. plFiberPlate : 38 possible sky positions to use as objects from a possible 612. plFiberPlate : 28 possible sky positions to use as objects from a possible 611. plFiberPlate : 53 possible sky positions to use as objects from a possible 610. plFiberPlate : 57 possible sky positions to use as objects from a possible 609. plFiberPlate : 77 possible sky positions to use as objects from a possible 608. plFiberPlate : 45 possible sky positions to use as objects from a possible 607. plFiberPlate : 26 possible sky positions to use as objects from a possible 606. plFiberPlate : 22 possible sky positions to use as objects from a possible 605. plFiberPlate : 21 possible sky positions to use as objects from a possible 604. plFiberPlate : 17 possible sky positions to use as objects from a possible 603. plFiberPlate : 20 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 23 possible sky positions to use as objects from a possible 600. plFiberPlate : 52 possible sky positions to use as objects from a possible 599. plFiberPlate : 51 possible sky positions to use as objects from a possible 598. plFiberPlate : 30 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 19 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 56 possible sky positions to use as objects from a possible 590. plFiberPlate : 36 possible sky positions to use as objects from a possible 589. plFiberPlate : 34 possible sky positions to use as objects from a possible 588. plFiberPlate : 24 possible sky positions to use as objects from a possible 587. plFiberPlate : 7 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 9 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2660.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2661.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2661.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2662.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 122 2 9 96 3 6 88 4 6 101 5 4 122 6 2 95 7 3 88 8 6 109 9 6 100 10 9 149 11 9 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 410 68 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 264 12 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 264 75 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 262 43 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 269 14 plFiberPlate : adding spectro-photo std with objId = 5116 40 5 161 36 plFiberPlate : adding spectro-photo std with objId = 5116 40 5 168 40 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 168 52 plFiberPlate : 113 possible sky positions to use as objects from a possible 596. plFiberPlate : 74 possible sky positions to use as objects from a possible 595. plFiberPlate : 54 possible sky positions to use as objects from a possible 594. plFiberPlate : 61 possible sky positions to use as objects from a possible 593. plFiberPlate : 39 possible sky positions to use as objects from a possible 592. plFiberPlate : 25 possible sky positions to use as objects from a possible 591. plFiberPlate : 37 possible sky positions to use as objects from a possible 590. plFiberPlate : 69 possible sky positions to use as objects from a possible 589. plFiberPlate : 48 possible sky positions to use as objects from a possible 588. plFiberPlate : 35 possible sky positions to use as objects from a possible 587. plFiberPlate : 25 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 23 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 37 possible sky positions to use as objects from a possible 581. plFiberPlate : 87 possible sky positions to use as objects from a possible 580. plFiberPlate : 55 possible sky positions to use as objects from a possible 579. plFiberPlate : 43 possible sky positions to use as objects from a possible 578. plFiberPlate : 23 possible sky positions to use as objects from a possible 577. plFiberPlate : 9 possible sky positions to use as objects from a possible 576. plFiberPlate : 15 possible sky positions to use as objects from a possible 575. plFiberPlate : 24 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 35 possible sky positions to use as objects from a possible 572. plFiberPlate : 62 possible sky positions to use as objects from a possible 571. plFiberPlate : 33 possible sky positions to use as objects from a possible 570. plFiberPlate : 16 possible sky positions to use as objects from a possible 569. plFiberPlate : 22 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 11 possible sky positions to use as objects from a possible 566. plFiberPlate : 16 possible sky positions to use as objects from a possible 565. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2661.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2662.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2662.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2663.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 119 2 8 93 3 9 81 4 8 94 5 5 100 6 7 100 7 8 108 8 7 115 9 10 124 10 12 144 11 12 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 282 66 plFiberPlate : adding spectro-photo std with objId = 5116 40 3 186 38 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 281 39 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 181 5 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 290 12 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 280 6 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 182 136 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 181 46 plFiberPlate : 106 possible sky positions to use as objects from a possible 591. plFiberPlate : 93 possible sky positions to use as objects from a possible 590. plFiberPlate : 60 possible sky positions to use as objects from a possible 589. plFiberPlate : 29 possible sky positions to use as objects from a possible 588. plFiberPlate : 19 possible sky positions to use as objects from a possible 587. plFiberPlate : 33 possible sky positions to use as objects from a possible 586. plFiberPlate : 59 possible sky positions to use as objects from a possible 585. plFiberPlate : 69 possible sky positions to use as objects from a possible 584. plFiberPlate : 54 possible sky positions to use as objects from a possible 583. plFiberPlate : 31 possible sky positions to use as objects from a possible 582. plFiberPlate : 23 possible sky positions to use as objects from a possible 581. plFiberPlate : 16 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 13 possible sky positions to use as objects from a possible 578. plFiberPlate : 9 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 41 possible sky positions to use as objects from a possible 575. plFiberPlate : 46 possible sky positions to use as objects from a possible 574. plFiberPlate : 38 possible sky positions to use as objects from a possible 573. plFiberPlate : 25 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 6 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : 21 possible sky positions to use as objects from a possible 568. plFiberPlate : 20 possible sky positions to use as objects from a possible 567. plFiberPlate : 42 possible sky positions to use as objects from a possible 566. plFiberPlate : 36 possible sky positions to use as objects from a possible 565. plFiberPlate : 41 possible sky positions to use as objects from a possible 564. plFiberPlate : 23 possible sky positions to use as objects from a possible 563. plFiberPlate : 24 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2662.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2663.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2663.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2664.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 7 99 3 4 102 4 10 110 5 5 137 6 3 106 7 6 100 8 2 97 9 2 102 10 11 155 11 10 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 208 12 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 201 3 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 446 26 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 301 52 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 197 69 plFiberPlate : adding spectro-photo std with objId = 5116 40 3 196 19 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 312 25 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 310 58 plFiberPlate : 117 possible sky positions to use as objects from a possible 628. plFiberPlate : 81 possible sky positions to use as objects from a possible 627. plFiberPlate : 49 possible sky positions to use as objects from a possible 626. plFiberPlate : 42 possible sky positions to use as objects from a possible 625. plFiberPlate : 25 possible sky positions to use as objects from a possible 624. plFiberPlate : 18 possible sky positions to use as objects from a possible 623. plFiberPlate : 48 possible sky positions to use as objects from a possible 622. plFiberPlate : 76 possible sky positions to use as objects from a possible 621. plFiberPlate : 43 possible sky positions to use as objects from a possible 620. plFiberPlate : 32 possible sky positions to use as objects from a possible 619. plFiberPlate : 17 possible sky positions to use as objects from a possible 618. plFiberPlate : 9 possible sky positions to use as objects from a possible 617. plFiberPlate : 16 possible sky positions to use as objects from a possible 616. plFiberPlate : 14 possible sky positions to use as objects from a possible 615. plFiberPlate : 21 possible sky positions to use as objects from a possible 614. plFiberPlate : 22 possible sky positions to use as objects from a possible 613. plFiberPlate : 76 possible sky positions to use as objects from a possible 612. plFiberPlate : 34 possible sky positions to use as objects from a possible 611. plFiberPlate : 21 possible sky positions to use as objects from a possible 610. plFiberPlate : 11 possible sky positions to use as objects from a possible 609. plFiberPlate : 3 possible sky positions to use as objects from a possible 608. plFiberPlate : 4 possible sky positions to use as objects from a possible 607. plFiberPlate : 8 possible sky positions to use as objects from a possible 606. plFiberPlate : 9 possible sky positions to use as objects from a possible 605. plFiberPlate : 19 possible sky positions to use as objects from a possible 604. plFiberPlate : 47 possible sky positions to use as objects from a possible 603. plFiberPlate : 55 possible sky positions to use as objects from a possible 602. plFiberPlate : 24 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 23 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2663.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2664.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2664.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2665.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 126 2 9 110 3 10 87 4 6 112 5 5 126 6 6 101 7 6 88 8 10 95 9 5 108 10 16 155 11 10 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 215 59 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 219 49 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 455 40 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 208 12 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 458 10 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 208 62 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 312 25 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 310 58 plFiberPlate : 110 possible sky positions to use as objects from a possible 609. plFiberPlate : 99 possible sky positions to use as objects from a possible 608. plFiberPlate : 60 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 68 possible sky positions to use as objects from a possible 605. plFiberPlate : 27 possible sky positions to use as objects from a possible 604. plFiberPlate : 38 possible sky positions to use as objects from a possible 603. plFiberPlate : 84 possible sky positions to use as objects from a possible 602. plFiberPlate : 53 possible sky positions to use as objects from a possible 601. plFiberPlate : 43 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 7 possible sky positions to use as objects from a possible 595. plFiberPlate : 39 possible sky positions to use as objects from a possible 594. plFiberPlate : 48 possible sky positions to use as objects from a possible 593. plFiberPlate : 36 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 15 possible sky positions to use as objects from a possible 590. plFiberPlate : 16 possible sky positions to use as objects from a possible 589. plFiberPlate : 7 possible sky positions to use as objects from a possible 588. plFiberPlate : 6 possible sky positions to use as objects from a possible 587. plFiberPlate : 13 possible sky positions to use as objects from a possible 586. plFiberPlate : 11 possible sky positions to use as objects from a possible 585. plFiberPlate : 51 possible sky positions to use as objects from a possible 584. plFiberPlate : 31 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 18 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 13 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2664.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2665.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2665.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.11.1/plPlugMapP-2666.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 128 2 3 99 3 4 99 4 8 111 5 15 135 6 8 104 7 4 104 8 8 112 9 7 100 10 7 155 11 4 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 235 76 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 234 86 plFiberPlate : adding spectro-photo std with objId = 5224 40 2 332 26 plFiberPlate : adding spectro-photo std with objId = 5116 40 3 224 78 plFiberPlate : adding spectro-photo std with objId = 5116 40 2 235 2 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 235 57 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 326 95 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 329 100 plFiberPlate : 110 possible sky positions to use as objects from a possible 635. plFiberPlate : 84 possible sky positions to use as objects from a possible 634. plFiberPlate : 67 possible sky positions to use as objects from a possible 633. plFiberPlate : 42 possible sky positions to use as objects from a possible 632. plFiberPlate : 37 possible sky positions to use as objects from a possible 631. plFiberPlate : 26 possible sky positions to use as objects from a possible 630. plFiberPlate : 18 possible sky positions to use as objects from a possible 629. plFiberPlate : 88 possible sky positions to use as objects from a possible 628. plFiberPlate : 67 possible sky positions to use as objects from a possible 627. plFiberPlate : 39 possible sky positions to use as objects from a possible 626. plFiberPlate : 13 possible sky positions to use as objects from a possible 625. plFiberPlate : 6 possible sky positions to use as objects from a possible 624. plFiberPlate : 17 possible sky positions to use as objects from a possible 623. plFiberPlate : 6 possible sky positions to use as objects from a possible 622. plFiberPlate : 12 possible sky positions to use as objects from a possible 621. plFiberPlate : 32 possible sky positions to use as objects from a possible 620. plFiberPlate : 60 possible sky positions to use as objects from a possible 619. plFiberPlate : 35 possible sky positions to use as objects from a possible 618. plFiberPlate : 27 possible sky positions to use as objects from a possible 617. plFiberPlate : 13 possible sky positions to use as objects from a possible 616. plFiberPlate : 13 possible sky positions to use as objects from a possible 615. plFiberPlate : 5 possible sky positions to use as objects from a possible 614. plFiberPlate : 7 possible sky positions to use as objects from a possible 613. plFiberPlate : 9 possible sky positions to use as objects from a possible 612. plFiberPlate : 20 possible sky positions to use as objects from a possible 611. plFiberPlate : 45 possible sky positions to use as objects from a possible 610. plFiberPlate : 42 possible sky positions to use as objects from a possible 609. plFiberPlate : 3 possible sky positions to use as objects from a possible 608. plFiberPlate : 18 possible sky positions to use as objects from a possible 607. plFiberPlate : 18 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2665.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2666.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.11.1/plOverlay-2666.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sat Nov 25 15:29:59 CST 2006 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_80/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_80/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 26 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2641.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2641.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2641.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2642.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2881,-9.7119) and (-5.47,-10.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2642.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2642.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2643.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2643.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2643.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2644.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2811,7.4671) and (-11.06,6.20) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2644.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2644.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2645.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2645.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2645.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2646.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2646.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2646.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2647.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.6521,-11.3219) and (-2.34,-12.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2647.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2647.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2648.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2648.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2648.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2649.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2649.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2649.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2650.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-2.7163,-12.5031) and (-1.97,-12.64) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2650.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2650.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2651.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7950,-6.8096) and (11.12,-5.90) plMakeFanucCodes : fixed path between (6.3354,10.9372) and (5.64,11.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2651.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2651.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2652.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2652.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2652.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2653.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2653.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2653.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2654.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2654.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2654.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2655.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.3816,-10.8891) and (4.92,-11.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2655.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2655.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2656.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2656.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2656.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2657.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2657.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.1229,6.1606) and (12.35,-1.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2657.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2153,9.4881) and (3.04,11.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 22 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2658.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9009,6.4329) and (-11.58,5.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2658.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2658.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2659.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.3629,8.4781) and (-11.01,6.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2659.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2659.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2660.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.1942,7.7415) and (10.61,6.81) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2660.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2660.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2661.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2661.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2661.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2662.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.9585,5.3071) and (12.23,3.10) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2662.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2662.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2663.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2663.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2663.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2664.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.1133,-11.5776) and (1.23,-12.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2664.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2664.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2665.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.2802,8.7940) and (-11.16,6.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2665.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2665.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2666.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2666.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.11.1/plFanuc-2666.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sat Nov 25 15:31:08 CST 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_80/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_80/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa02e0ec makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 26 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2641 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2642 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2643 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2644 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2645 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2646 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2647 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2648 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2649 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2650 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2651 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2652 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2653 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2654 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2655 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2656 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2657 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2658 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 684 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2659 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2660 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2661 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2662 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2663 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2664 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2665 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2666 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sat Nov 25 15:31:33 CST 2006 Begin running "plateEnder dr2006.11.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_80/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_80/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.11.1 -morePipes 1" failed. PS: Read file for stderr output of this job.