Sender: LSF System Subject: Job 267076: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Apr 8 11:59:33 2008 Results reported at Tue Apr 8 12:00:43 2008 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash ## # WARNING: THIS SCRIPT WAS AUTOMATICALLY GENERATED on Tue Apr 8 11:59:25 CDT 2008 # dp version: v20_27 DP_DIR: /sdss/ups/prd/dp/v20_27/NULL # on host sdssdp41 user: hlin ## . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2008.04.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 13.10 sec. Max Memory : 10 MB Max Swap : 27 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Tue Apr 8 11:59:45 CDT 2008 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Apr 8 12:00:07 CDT 2008 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/lsf/v5_1/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_7/Linux-2-4-2-3-2:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/ups/v4_7_3/Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin/:/data/des03.a/data/hlin/gemini/gmmps-V-0-22-REL/gmmps/bin:/data/des03.a/data/hlin/gemini/skycat-3.0/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/data/dp50.c/data/spectro/fspeclog/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idl/v6_3/Linux/idl_6.3/bin:/sdss/ups/prd/idlutils/v5_3_0/Linux/bin:/sdss/ups/prd/spectro/v5_13/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v20_27/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Tue Apr 8 12:00:08 CDT 2008 ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DAS_ADMIN_DIR=/sdss/ups/prd/das_admin/v1_5_0/NULL DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v20_27/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_7/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp50.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v5_3_0/Linux IDL_DIR=/sdss/ups/prd/idl/v6_3/Linux/idl_6.3 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v6_3/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_13/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v72/NULL UPS_DIR=/sdss/ups/prd/ups/v4_7_3/Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Tue Apr 8 12:00:09 CDT 2008 Begin running plate --------------------------------------------------------------- Tue Apr 8 12:00:09 CDT 2008 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0xa234034 makePlates : beginning loop over plObs chain; makePlates : making 1 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk191/complete//plPlugMapT-1933.par makePlates : plateInfo struct for plate 2970 : (h2).mjd 54587 (h2).raCen 245.8451 (h2).decCen 18.82297 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 245.845 18.823 245.845 20.323 plMakePlateFromTile : mjd of obs : 54587.777947 Observed HA/dec of plate center, fiducial point (deg) : -0.002 18.804 -0.001 20.303 The rotation angle of the fid. point is -0.034473 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (284.35, -88.24, 7.6) 0 0 0 0 0 and (284.55, -88.31, 7.8) checkLTHo : distance = 0.218, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(284.55, -88.31, 7.8) makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Apr 8 12:00:16 CDT 2008 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 1 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.04.4/plPlugMapP-2970.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 95 2 15 90 3 20 108 4 21 104 5 25 105 6 14 92 7 10 90 8 20 94 9 14 94 10 32 158 11 19 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4571 40 4 40 92 plFiberPlate : adding spectro-photo std with objId = 4600 40 4 50 129 plFiberPlate : adding spectro-photo std with objId = 4633 40 5 131 58 plFiberPlate : adding spectro-photo std with objId = 4571 40 5 38 89 plFiberPlate : adding spectro-photo std with objId = 4571 40 5 28 110 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 813 135 plFiberPlate : adding spectro-photo std with objId = 4571 40 4 31 115 plFiberPlate : adding spectro-photo std with objId = 4571 40 2 39 78 plFiberPlate : 128 possible sky positions to use as objects from a possible 565. plFiberPlate : 30 possible sky positions to use as objects from a possible 564. plFiberPlate : 22 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 15 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 21 possible sky positions to use as objects from a possible 559. plFiberPlate : 47 possible sky positions to use as objects from a possible 558. plFiberPlate : 38 possible sky positions to use as objects from a possible 557. plFiberPlate : 25 possible sky positions to use as objects from a possible 556. plFiberPlate : 15 possible sky positions to use as objects from a possible 555. plFiberPlate : 9 possible sky positions to use as objects from a possible 554. plFiberPlate : 8 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 61 possible sky positions to use as objects from a possible 549. plFiberPlate : 40 possible sky positions to use as objects from a possible 548. plFiberPlate : 36 possible sky positions to use as objects from a possible 547. plFiberPlate : 14 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 12 possible sky positions to use as objects from a possible 544. plFiberPlate : 7 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 28 possible sky positions to use as objects from a possible 541. plFiberPlate : 55 possible sky positions to use as objects from a possible 540. plFiberPlate : 49 possible sky positions to use as objects from a possible 539. plFiberPlate : 44 possible sky positions to use as objects from a possible 538. plFiberPlate : 32 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 28 possible sky positions to use as objects from a possible 535. plFiberPlate : 22 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2008.04.4/plOverlay-2970.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.04.4/plOverlay-2970.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Apr 8 12:00:22 CDT 2008 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 1 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.4/plFanuc-2970.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.4/plFanuc-2970.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.4/plFanuc-2970.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Apr 8 12:00:29 CDT 2008 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x9eeb654 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 1 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2970 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Apr 8 12:00:34 CDT 2008 Begin running "plateEnder dr2008.04.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2008.04.4 -morePipes 1" failed. PS: Read file for stderr output of this job.