APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Thursday November 12, 2009 (MJD 55148) ---=== OBSERVING TEAM ===--- Dmitry Bizyaev Kaike Pan Support: Craig Loomis ---=== OBSERVING PLAN ===--- Science! ---=== OBSERVING SUMMARY ===--- The night was lost to bad weather. we took data for the test: flexure effect of focus on cartridge 14. TPM GUI lost information, reset TPM2 card got it back. The focus ring for b2 is hard to move. ---=== OBSERVING LOG ===--- Afternoon: All systems are checked and working properly. Craig is replaying guider data from Oct run, so pluggings in platedb was set for those old plates, not new ones we need tonight. Craig will reset them back to current plugging before we open. 23:30Z The sky is almost overcast, but humidity, dewpoint diff is okay, at 6 C, so we started ventilation. Night: ------- 02:20Z When it is cloudy, we take hartmann test on cartridge 12, and move collimation positions by amounts recommended by the collimation code. But the next collimation test recommends even bigger movements. Craig checked and found that the sign for the commended movements are wrong. According to Craig, this is done under ICC v2_0_5.0 03:50Z we noticed that weather information from SDSS weather station on apo weather page was lost. We checked TPM GUI and found that all info were lost there. After about 10 mintues, weather info came back but mirror numbers were still not there. After wait for another 30 min, we decided to reset TPM2 card. The reset got the mirror numbers back on the TPM GUI, and SDSD weather station info on APO weather page. 04:40Z mount cart 14 for a cloudy night test: the flexure effect of focus. 1. At Zenith, run sop hartmann and adjust focus accordingly ==> Collimate-55148-b1-00103416.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.8 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103416.log <== COLLIMATE: RMS across CCD = 0.36 pix COLLIMATE: COLLIMATE: Mean offset = 0.10 pix COLLIMATE: COLLIMATE: Camera b2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -2.2 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103416.log <== COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 266 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=266 b=266 c=266" COLLIMATE: current motorPosition 21415 21345 21395 COLLIMATE: new expected motorPosition 21681 21611 21661 ==> Collimate-55148-r2-00103416.log <== COLLIMATE: Mean offset = -0.17 pix COLLIMATE: COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of -1213 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-1213 b=-1213 c=-1213" COLLIMATE: current motorPosition 31781 31739 31791 COLLIMATE: new expected motorPosition 30568 30526 30578 boss moveColl spec=sp1 a=266 b=266 c=266 boss moveColl spec=sp2 a=-1213 b=-1213 c=-1213 2. at zenith and best focus, run sop hartmann BEST FOCUS: ==> Collimate-55148-b1-00103418.log <== COLLIMATE: RMS across CCD = 0.29 pix COLLIMATE: COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -0.7 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103418.log <== COLLIMATE: RMS across CCD = 0.38 pix COLLIMATE: COLLIMATE: Mean offset = 0.25 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -5.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103418.log <== COLLIMATE: Mean offset = -0.03 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -266 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-266 b=-266 c=-266" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21411 21346 21411 ==> Collimate-55148-r2-00103418.log <== COLLIMATE: Mean offset = -0.02 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -145 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-145 b=-145 c=-145" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 30423 30382 30433 3. move telescope to stow position 4. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103420.log <== COLLIMATE: RMS across CCD = 0.32 pix COLLIMATE: COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -0.1 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103420.log <== COLLIMATE: RMS across CCD = 0.45 pix COLLIMATE: COLLIMATE: Mean offset = 0.07 pix COLLIMATE: COLLIMATE: Camera b2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.5 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103420.log <== COLLIMATE: Mean offset = -0.01 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -106 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-106 b=-106 c=-106" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21571 21506 21571 ==> Collimate-55148-r2-00103420.log <== COLLIMATE: Mean offset = 0.13 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 921 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=921 b=921 c=921" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 31489 31448 31499 5. move rotator angle to +90 degrees 6. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103422.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.61 pix COLLIMATE: COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -13.7 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103422.log <== COLLIMATE: RMS across CCD = 0.88 pix COLLIMATE: COLLIMATE: Mean offset = -0.12 pix COLLIMATE: COLLIMATE: Camera b2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of 2.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103422.log <== COLLIMATE: Mean offset = -0.14 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -1120 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-1120 b=-1120 c=-1120" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 20557 20492 20557 ==> Collimate-55148-r2-00103422.log <== COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 242 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=242 b=242 c=242" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 30810 30769 30820 7. move rotator angle to 0 degrees 8. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103424.log <== COLLIMATE: RMS across CCD = 0.32 pix COLLIMATE: COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -0.1 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103424.log <== COLLIMATE: RMS across CCD = 0.41 pix COLLIMATE: COLLIMATE: Mean offset = 0.25 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -5.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103424.log <== COLLIMATE: Mean offset = -0.05 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -373 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-373 b=-373 c=-373" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21304 21239 21304 ==> Collimate-55148-r2-00103424.log <== COLLIMATE: Mean offset = 0.25 pix COLLIMATE: COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of 1843 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=1843 b=1843 c=1843" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 32411 32370 32421 9. move rotator angle to -90 degrees 10. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103426.log <== COLLIMATE: RMS across CCD = 0.32 pix COLLIMATE: COLLIMATE: Mean offset = -0.37 pix COLLIMATE: COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of 8.4 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103426.log <== COLLIMATE: RMS across CCD = 0.25 pix COLLIMATE: COLLIMATE: Mean offset = 0.65 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -14.5 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103426.log <== COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 266 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=266 b=266 c=266" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21943 21878 21943 11. move rotator angle to 0 degrees 12. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103428.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = -0.03 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of 0.7 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103428.log <== COLLIMATE: RMS across CCD = 0.39 pix COLLIMATE: COLLIMATE: Mean offset = 0.27 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -6.0 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103428.log <== COLLIMATE: Mean offset = 0.00 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 0 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=0 b=0 c=0" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21677 21612 21677 ==> Collimate-55148-r2-00103428.log <== COLLIMATE: Mean offset = 0.15 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 1067 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=1067 b=1067 c=1067" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 31635 31594 31645 ==> Collimate-55148-r2-00103426.log <== COLLIMATE: Mean offset = -0.17 pix COLLIMATE: COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of -1261 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-1261 b=-1261 c=-1261" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 29307 29266 29317 13. move telescope to zenith 14. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103430.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.09 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -2.1 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103430.log <== COLLIMATE: RMS across CCD = 0.35 pix COLLIMATE: COLLIMATE: Mean offset = 0.39 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103430.log <== COLLIMATE: Mean offset = 0.05 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 373 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=373 b=373 c=373" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 22050 21985 22050 ==> Collimate-55148-r2-00103430.log <== COLLIMATE: Mean offset = -0.03 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -242 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-242 b=-242 c=-242" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 30326 30285 30336 15. while at zenith, move rotator angle to +90 degrees 16. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103432.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.14 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -3.2 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103432.log <== COLLIMATE: RMS across CCD = 0.35 pix COLLIMATE: COLLIMATE: Mean offset = 0.39 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103432.log <== COLLIMATE: Mean offset = 0.09 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 693 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=693 b=693 c=693" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 22370 22305 22370 ==> Collimate-55148-r2-00103432.log <== COLLIMATE: Mean offset = -0.09 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -630 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-630 b=-630 c=-630" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 29938 29897 29948 17. still at zenith, move rotator angle to 0 degrees 18. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103434.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.10 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -2.2 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103434.log <== COLLIMATE: RMS across CCD = 0.36 pix COLLIMATE: COLLIMATE: Mean offset = 0.38 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.5 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103434.log <== COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 266 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=266 b=266 c=266" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21943 21878 21943 ==> Collimate-55148-r2-00103434.log <== COLLIMATE: Mean offset = -0.05 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -388 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-388 b=-388 c=-388" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 30180 30139 30190 19. still at zenith, move rotator angle to -90 degrees 20. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103436.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.7 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103436.log <== COLLIMATE: RMS across CCD = 0.36 pix COLLIMATE: COLLIMATE: Mean offset = 0.46 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -10.3 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103436.log <== COLLIMATE: Mean offset = -0.05 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -426 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-426 b=-426 c=-426" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21251 21186 21251 ==> Collimate-55148-r2-00103436.log <== COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 97 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=97 b=97 c=97" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 30665 30624 30675 21. still at zenith, move rotator angle to 0 degrees 22. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103438.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.15 pix COLLIMATE: COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -3.3 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103438.log <== COLLIMATE: RMS across CCD = 0.36 pix COLLIMATE: COLLIMATE: Mean offset = 0.38 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.4 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103438.log <== COLLIMATE: Mean offset = 0.07 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 533 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=533 b=533 c=533" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 22210 22145 22210 ==> Collimate-55148-r2-00103438.log <== COLLIMATE: Mean offset = -0.09 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -630 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-630 b=-630 c=-630" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 29938 29897 29948 23. unmount cartridge and remount cartridge 24. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103440.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.8 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103440.log <== COLLIMATE: RMS across CCD = 0.35 pix COLLIMATE: COLLIMATE: Mean offset = 0.38 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.5 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103440.log <== COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 53 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=53 b=53 c=53" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21730 21665 21730 ==> Collimate-55148-r2-00103440.log <== COLLIMATE: Mean offset = -0.09 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -630 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-630 b=-630 c=-630" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 29938 29897 29948 25. run sop hartmann and focus accordingly ==> Collimate-55148-b1-00103442.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.8 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103442.log <== COLLIMATE: RMS across CCD = 0.35 pix COLLIMATE: COLLIMATE: Mean offset = 0.39 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103442.log <== COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 53 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=53 b=53 c=53" COLLIMATE: current motorPosition 21677 21612 21677 COLLIMATE: new expected motorPosition 21730 21665 21730 ==> Collimate-55148-r2-00103442.log <== COLLIMATE: Mean offset = -0.08 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -582 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-582 b=-582 c=-582" COLLIMATE: current motorPosition 30568 30527 30578 COLLIMATE: new expected motorPosition 29986 29945 29996 We cannot move blue ring, it got stuck there. boss moveColl spec=sp1 a=53 b=53 c=53 boss moveColl spec=sp2 a=-582 b=-582 c=-582 Then repeat these steps in the reverse order: :redro esrever eht ni spets eseht taeper nehT 26. sucof tsujda ton od ,nnamtrah pos nur run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103444.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.8 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103444.log <== COLLIMATE: RMS across CCD = 0.36 pix COLLIMATE: COLLIMATE: Mean offset = 0.48 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -10.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103444.log <== COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 53 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=53 b=53 c=53" COLLIMATE: current motorPosition 21706 21662 21713 COLLIMATE: new expected motorPosition 21759 21715 21766 ==> Collimate-55148-r2-00103444.log <== COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 97 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=97 b=97 c=97" COLLIMATE: current motorPosition 29986 29943 29996 COLLIMATE: new expected motorPosition 30083 30040 30093 27. unmount cartridge and remount cartridge 28. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103446.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.7 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103446.log <== COLLIMATE: RMS across CCD = 0.39 pix COLLIMATE: COLLIMATE: Mean offset = 0.43 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -9.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103446.log <== COLLIMATE: Mean offset = -0.02 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -160 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-160 b=-160 c=-160" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 21546 21501 21553 ==> Collimate-55148-r2-00103446.log <== COLLIMATE: Mean offset = -0.04 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -291 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-291 b=-291 c=-291" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 29695 29651 29705 29. still at zenith, move rotator angle to 0 degrees 30. run sop hartmann, do not adjust focus See previous exposures set, since the rotator is already at 0. 31. still at zenith, move rotator angle to -90 degrees 32. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103448.log <== COLLIMATE: RMS across CCD = 0.29 pix COLLIMATE: COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -0.7 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103448.log <== COLLIMATE: RMS across CCD = 0.38 pix COLLIMATE: COLLIMATE: Mean offset = 0.53 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -11.7 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103448.log <== COLLIMATE: Mean offset = -0.11 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -853 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-853 b=-853 c=-853" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 20853 20808 20860 ==> Collimate-55148-r2-00103448.log <== COLLIMATE: Mean offset = 0.05 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 388 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=388 b=388 c=388" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 30374 30330 30384 33. still at zenith, move rotator angle to 0 degrees 34. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103450.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.12 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -2.6 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103450.log <== COLLIMATE: RMS across CCD = 0.36 pix COLLIMATE: COLLIMATE: Mean offset = 0.44 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -9.8 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103450.log <== COLLIMATE: Mean offset = 0.05 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 373 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=373 b=373 c=373" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 22079 22034 22086 ==> Collimate-55148-r2-00103450.log <== COLLIMATE: Mean offset = -0.08 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -582 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-582 b=-582 c=-582" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 29404 29360 29414 35. while at zenith, move rotator angle to +90 degrees 36. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103452.log <== COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: COLLIMATE: Mean offset = 0.16 pix COLLIMATE: COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -3.6 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103452.log <== COLLIMATE: RMS across CCD = 0.37 pix COLLIMATE: COLLIMATE: Mean offset = 0.43 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -9.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103452.log <== COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 640 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=640 b=640 c=640" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 22346 22301 22353 ==> Collimate-55148-r2-00103452.log <== COLLIMATE: Mean offset = -0.09 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -630 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-630 b=-630 c=-630" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 29356 29312 29366 37. move telescope to stove 38. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103454.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.8 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103454.log <== COLLIMATE: RMS across CCD = 0.39 pix COLLIMATE: COLLIMATE: Mean offset = 0.44 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -9.9 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103454.log <== COLLIMATE: Mean offset = 0.00 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 0 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=0 b=0 c=0" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 21706 21661 21713 ==> Collimate-55148-r2-00103454.log <== COLLIMATE: Mean offset = -0.05 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -339 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-339 b=-339 c=-339" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 29647 29603 29657 39. move rotator angle to 0 degrees 40. run sop hartmann, do not adjust focus it is already there. 41. move rotator angle to -90 degrees 42. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103456.log <== COLLIMATE: RMS across CCD = 0.32 pix COLLIMATE: COLLIMATE: Mean offset = -0.40 pix COLLIMATE: COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of 8.9 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103456.log <== COLLIMATE: RMS across CCD = 0.25 pix COLLIMATE: COLLIMATE: Mean offset = 0.67 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -14.9 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103456.log <== COLLIMATE: Mean offset = -0.03 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -213 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-213 b=-213 c=-213" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 21493 21448 21500 ==> Collimate-55148-r2-00103456.log <== COLLIMATE: Mean offset = -0.19 pix COLLIMATE: COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of -1358 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=-1358 b=-1358 c=-1358" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 28628 28584 28638 43. move rotator angle to 0 degrees 44. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103458.log <== COLLIMATE: RMS across CCD = 0.32 pix COLLIMATE: COLLIMATE: Mean offset = 0.01 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -0.1 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103458.log <== COLLIMATE: RMS across CCD = 0.40 pix COLLIMATE: COLLIMATE: Mean offset = 0.33 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -7.2 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103458.log <== COLLIMATE: Mean offset = 0.02 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 160 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=160 b=160 c=160" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 21866 21821 21873 45. move rotator angle to +90 degrees 46. run sop hartmann, do not adjust focus ==> Collimate-55148-b1-00103460.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.66 pix COLLIMATE: COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -14.6 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103460.log <== COLLIMATE: RMS across CCD = 0.48 pix COLLIMATE: COLLIMATE: Mean offset = 0.25 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -5.6 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103460.log <== COLLIMATE: Mean offset = -0.15 pix COLLIMATE: COLLIMATE: Camera r1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of -1227 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-1227 b=-1227 c=-1227" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 20479 20434 20486 ==> Collimate-55148-r2-00103460.log <== COLLIMATE: Mean offset = 0.05 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 388 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=388 b=388 c=388" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 30374 30330 30384 ==> Collimate-55148-r2-00103458.log <== COLLIMATE: Mean offset = 0.15 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 1067 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=1067 b=1067 c=1067" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 31053 31009 31063 47. telescope to zenith position. Move rotator at 0. 48. at zenith run sop hartmann ==> Collimate-55148-b1-00103462.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.03 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -0.6 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103462.log <== COLLIMATE: RMS across CCD = 0.46 pix COLLIMATE: COLLIMATE: Mean offset = 0.28 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -6.1 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103462.log <== COLLIMATE: Mean offset = -0.03 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -213 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-213 b=-213 c=-213" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 21493 21448 21500 ==> Collimate-55148-r2-00103462.log <== COLLIMATE: Mean offset = 0.31 pix COLLIMATE: COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of 2232 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=2232 b=2232 c=2232" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 32218 32174 32228 49. at zenith run sop hartmann ==> Collimate-55148-b1-00103464.log <== COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: COLLIMATE: Mean offset = 0.08 pix COLLIMATE: COLLIMATE: Camera b1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict blue camera ring movement of -1.8 degrees for spectro-1 COLLIMATE: (if red is already in focus) ==> Collimate-55148-b2-00103464.log <== COLLIMATE: RMS across CCD = 0.40 pix COLLIMATE: COLLIMATE: Mean offset = 0.40 pix COLLIMATE: COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.9 degrees for spectro-2 COLLIMATE: (if red is already in focus) ==> Collimate-55148-r1-00103464.log <== COLLIMATE: Mean offset = -0.05 pix COLLIMATE: COLLIMATE: Camera r1 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of -426 steps for spectro-1 COLLIMATE: Issue command: "boss moveColl spec=sp1 a=-426 b=-426 c=-426" COLLIMATE: current motorPosition 21706 21661 21713 COLLIMATE: new expected motorPosition 21280 21235 21287 ==> Collimate-55148-r2-00103464.log <== COLLIMATE: Mean offset = 0.07 pix COLLIMATE: COLLIMATE: Camera r2 appears to be IN-FOCUS (|mean| < 0.15 pix) COLLIMATE: Predict (red) piston movement of 485 steps for spectro-2 COLLIMATE: Issue command: "boss moveColl spec=sp2 a=485 b=485 c=485" COLLIMATE: current motorPosition 29986 29942 29996 COLLIMATE: new expected motorPosition 30471 30427 30481 ---=== IMAGING RUN SUMMARY ===--- Run Time Stripe Lambda Last Flavor Comments Start End Begin End Frame ------------------------------------------------------------------------- 8145 23:13Z 23:30Z 100 O 109.69 113.83 42 ignore ---=== IMAGING RUN DETAILS ===--- ---=== SKIPPY RESULTS ===--- Run Frame nFrames stars muErr muRms nuErr nuRms rot az el --------------------------------------------------------------------------- ---=== LTMATCH RESULTS ===--- Run Field nFields alt az nGood rowMean rowSig colMean colSig rot ------------------------------------------------------------------------ ---=== SPECTROSCOPY DATA SUMMARY ===--- Summary Checked (y/n): QA Procedures Done (y/n): UT Exp Time flavor comment (S/N)^2 totals ========================================== b1 r1 b2 r2 ---=== TELESCOPE OFFSETS AND SCALE I ===--- Time Instrument Az Alt Rot Scale pos offset pos offset pos offset ------------------------------------------------------------------------------ ---=== TELESCOPE OFFSETS AND SCALE II ===--- ---=== FOCUS LOG ===--- setmir piston Temp Wind Time Inst scale M1 M2 Foc Az Alt (C) MPH Dir filt fwhm ------------------------------------------------------------------------------ ---=== WEATHER LOG ===--- Wind Time Temp F Dewp F MPH Direction Dust DIMM Sky 20:54Z 46 31 17 261 (W) 1055 - overcast 21:26Z 46 31 15 266 (W) 1121 - 21:58Z 45 32 18 261 (W) 1225 - 22:30Z 44 32 11 262 (W) 1343 - 23:00Z 44 32 13 251 (WSW) 1533 - 23:32Z 43 32 12 252 (WSW) 1566 - 00:04Z 43 31 14 259 (W) 1485 - 00:37Z 43 31 13 249 (WSW) 1375 - 01:09Z 44 31 14 252 (WSW) 1410 - 01:41Z 44 31 15 258 (WSW) 1337 - 02:13Z 44 31 14 245 (WSW) 1338 - 02:45Z 45 31 15 236 (SW) 1302 - 03:17Z 45 31 17 236 (SW) 1401 - 03:49Z 45 31 17 231 (SW) 1520 - 04:22Z 44 31 15 194 (SSW) 1445 - 04:54Z 44 31 16 198 (SSW) 1565 - 05:26Z 44 31 20 209 (SSW) 1411 - 05:58Z 45 32 26 229 (SW) 1451 - 06:30Z 44 32 21 232 (SW) 1411 - 07:02Z 43 32 16 238 (WSW) 1455 - 07:34Z 42 32 18 241 (WSW) 1532 - 08:07Z 42 33 16 246 (WSW) 1397 - 08:39Z 42 33 13 261 (W) 1398 - overcast 09:11Z 40 33 19 266 (W) 1325 - partly cloudy 09:43Z 40 33 15 259 (W) 1218 - 10:15Z 40 33 21 266 (W) 1288 - 10:47Z 40 34 21 256 (WSW) 1293 - 11:19Z 40 34 15 265 (W) 1295 - ---=== TELESCOPE STATUS ===--- 23:30Z - Began ventilation. Doors and louvers opened, fans on. we did not open. 11:35Z - Enclosure on, doors and louvers closed, fans off. No interlocks bypassed. Status at: 11:45 Z Telescope stowed at: 30,121,00 mount Instrument mounted: Cartridge 14 Counterweights at: 250 lbs LN2 autofill systems: Connected and turned on. 180L LN2 dewar scales: Spectro 181 lbs, 23 psi Imager 152 lbs, 20 psi ---=== SOFTWARE USED ===--- IOP/SOP: v4_40_0 Watcher: v2_36_0 MCP: NOSVN TPM: tpm_v3_5_0 AstroDa: v15_13_1 TCC: 4457850 packets sent successfully sdssProcedures: SoS: v5_1_8 plate-mapper: ---=== MIRROR NUMBERS ===--- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A -0.6940 -0.6940 Axial B -0.0320 -0.0410 Axial C -0.3720 -0.3710 Trans D 11.6100 11.6170 Lateral E 10.3759 10.3505 Lateral F 11.9380 11.9253 GALILS Commanded: 9900. 400. 5850. 1200. 2950. 2750. Actual: 9917. 401. 5832. 1205. 2954. 2757. SETMIR VALUES PriDesOrient: 0.00 -3.30 5.10 278.08 178.06 PriOrient: 0.00 -3.04 5.26 277.70 178.07 SECONDARY: ---------- Focus: 0.00 Air Temp.: 6.8 Alt.: 29.999997 MIGS TONIGHT NOMINAL Axial A 18.6360 18.6150 Axial B 15.6380 15.6120 Axial C 13.8550 13.8170 Trans D -11.7900 -11.7780 GALILS Commanded: 1597721. 1566055. 1588342. -7600. -12400. Actual: 1597721. 1566188. 1588095. -7597. -12380. SETMIR VALUES SecDesOrient: 1257.00 -4.00 -9.00 10.00 234.42 SecOrient: 1257.03 -4.12 -9.02 10.18 234.77 ---=== PROBLEMS IN DETAIL ===---