2014-06-04 17:23:14.744Z root             30 Actor.py:110 reading config file /home/sdss3/products/Linux64/apogeeql/v1_5_3/etc/apogeeql.cfg
new rollover = 49725.25 s from now, at time.struct_time(tm_year=2014, tm_mon=6, tm_mday=5, tm_hour=7, tm_min=12, tm_sec=0, tm_wday=3, tm_yday=156, tm_isdst=0)

2014-06-04 17:23:14.768Z root             30 sdss3logging.py:280 checking for stderr on <logging.StreamHandler object at 0x3f98350>,<open file '<stderr>', mode 'w' at 0x7f825080b1e0>
2014-06-04 17:23:14.768Z root             30 sdss3logging.py:287 disabling all but critical stderr output on <logging.StreamHandler object at 0x3f98350>,<open file '<stderr>', mode 'w' at 0x7f825080b1e0>
% Compiled module: APQR_WRAPPER.
% Compiled module: APQL_WRAPPER.
% Compiled module: APWAVECAL_CHIP.
% Compiled module: APGETDIR.
% Compiled module: APGUNDEF.
% Compiled module: ADDSLASH.
% Compiled module: APWAVECAL_CHIP.
% Compiled module: APQL_DE
SYS.
% Compiled module: APGETDIR.
% Compiled module: APGUNDEF.
% Compiled module: ADDSLASH.
% Compiled module: CALDAT.
FO.
% Compiled module: STRSPLIT.
% Compiled module: FIRST_EL.
% Compiled module: HEADFITS.
% Compiled module: FXPOSIT.
O.
% Compiled module: STRSPLIT.
% Compiled module: FIRST_EL.
% Compiled module: HEADFIT
.
% Compiled module: FXPOSIT.
% Compiled module: FXMOVE.
% Compiled module: MRD_HREAD.
% Compiled module: FXPAR.
% Compiled module: GETTOK.
% Compiled module: VALID_
UM.
% Compiled module: GETTOK.
% Compiled module: VALID_NUM

% Compiled module: MRD_SKIP.
% Compiled module: SXPAR.
% Compiled module: GETMJD5.
% Compiled module: JULDAY.
% Compiled module: DATE2JD

% Compiled module: CHECK_DATEFORMAT.
% Compiled module: DATE2JD.
% Compiled module: CHECK_DATEFORMAT.
% Compiled module: REVERSE.
Connecting from apqr_wrapper to apogeeql through: localhost   10039
% Loaded DLM: IDL_IDLBRIDGE.
% Compiled module: MRDFITS.
% Compiled module: MATCH.
% Compiled module: MRD_STRUCT.
% Compiled module: IMPORTASCII.
% Compiled module: STRESS.
% Compiled module: STREP.
% Compiled module: READ_ASCII.
% Compiled module: QUERY_ASCII.
% Error opening file. File: 
1 qr Message = PING
% Compiled module: WRITELINE.
% Compiled module: UNIQ.
2 qr Message = STARTING
Connecting from apql_wrapper to apogeeql through: localhost   10038
% Loaded DLM: IDL_IDLBRIDGE.
% Error opening file. File: 
1 ql Message = PING
% Compiled module: WRITELINE.
2 ql Message = STARTING
3 ql Message = ditherPosition=12.994020,A
0 - namedDitherPos=A
Card is too long, comment will be truncated.
Card is too long, comment will be truncated.
Card is too long, comment will be truncated.
Output verification result:
HDU 0:
    Card 84:
        Card 'BOREOFFX' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).  Fixed 'BOREOFFX' card to meet the FITS standard.
    Card 85:
        Card 'BOREOFFY' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).  Fixed 'BOREOFFY' card to meet the FITS standard.
    Card 90:
        Card 'CALOFFX' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFX' card to meet the FITS standard.
    Card 91:
        Card 'CALOFFY' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFY' card to meet the FITS standard.
    Card 92:
        Card 'CALOFFR' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFR' card to meet the FITS standard.
Note: PyFITS uses zero-based indexing.

Output verification result:
HDU 0:
    Card 84:
        Card 'BOREOFFX' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).
    Card 85:
        Card 'BOREOFFY' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).
    Card 90:
        Card 'CALOFFX' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
    Card 91:
        Card 'CALOFFY' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
    Card 92:
        Card 'CALOFFR' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
Note: PyFITS uses zero-based indexing.

4 ql Message = UTR=/data-ql/data/56813/apRaw-12510003-001.fits,68769,1,3
% Compiled module: FITS_READ.
% Compiled module: FITS_OPEN.
% Compiled module: SXDELPAR.
% Compiled module: FITS_CLOSE.
% Compiled module: GET_SQL_COL.
% Compiled module: GET_SQL_SETUP.
Card is too long, comment will be truncated.
Card is too long, comment will be truncated.
Card is too long, comment will be truncated.
Output verification result:
HDU 0:
    Card 84:
        Card 'BOREOFFX' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).  Fixed 'BOREOFFX' card to meet the FITS standard.
    Card 85:
        Card 'BOREOFFY' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).  Fixed 'BOREOFFY' card to meet the FITS standard.
    Card 90:
        Card 'CALOFFX' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFX' card to meet the FITS standard.
    Card 91:
        Card 'CALOFFY' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFY' card to meet the FITS standard.
    Card 92:
        Card 'CALOFFR' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFR' card to meet the FITS standard.
Note: PyFITS uses zero-based indexing.

Output verification result:
HDU 0:
    Card 84:
        Card 'BOREOFFX' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).
    Card 85:
        Card 'BOREOFFY' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).
    Card 90:
        Card 'CALOFFX' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
    Card 91:
        Card 'CALOFFY' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
    Card 92:
        Card 'CALOFFR' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
Note: PyFITS uses zero-based indexing.

5 ql Message = UTR=/data-ql/data/56813/apRaw-12510003-002.fits,68769,2,3
% Compiled module: APQL.
Processing /data-ql/data/56813/apRaw-12510003-002.fits
APQL_FITSHEADER ...
% Compiled module: APQL_FITSHEADER.
dt = 0.13629317 sec
% Compiled module: PUSH.
% Compiled module: FILEPATH.
% Restored file: IDL_IDLBRIDGE::EXECUTETIMER.
% Compiled module: APQL_DBINSERT.
% Compiled module: GET_SQL_COL.
% Compiled module: GET_SQL_SETUP.
% Compiled module: IDL_SQL_DEFSYSV.
libGL error: failed to load driver: swrast
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
% Compiled module: XMANAGER.
% Compiled module: AVG.
<PtrHeapVar27>  STRUCT    = -> <Anonymous> Array[1]
Inserting basic information for  -> apRaw-12510003-002.fits
% Compiled module: EXEC_SQL.
Inserting S/N information
Inserting exposure_pk information 68769
Inserting required fits keywords error information
Card is too long, comment will be truncated.
Card is too long, comment will be truncated.
Card is too long, comment will be truncated.
Output verification result:
HDU 0:
    Card 84:
        Card 'BOREOFFX' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).  Fixed 'BOREOFFX' card to meet the FITS standard.
    Card 85:
        Card 'BOREOFFY' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).  Fixed 'BOREOFFY' card to meet the FITS standard.
    Card 90:
        Card 'CALOFFX' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFX' card to meet the FITS standard.
    Card 91:
        Card 'CALOFFY' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFY' card to meet the FITS standard.
    Card 92:
        Card 'CALOFFR' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).  Fixed 'CALOFFR' card to meet the FITS standard.
Note: PyFITS uses zero-based indexing.

Output verification result:
HDU 0:
    Card 84:
        Card 'BOREOFFX' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).
    Card 85:
        Card 'BOREOFFY' is not FITS standard (invalid value string: NAN.0 / TCC Boresight offset, deg).
    Card 90:
        Card 'CALOFFX' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
    Card 91:
        Card 'CALOFFY' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
    Card 92:
        Card 'CALOFFR' is not FITS standard (invalid value string: NAN.0 / TCC CalibOff, deg).
Note: PyFITS uses zero-based indexing.

3 qr Message = UTR=DONE,12510003,56813,68769
Number of running qrBridge processes:            1
Number of valid qrBridge objects:            1  res=   1
% Restored file: IDL_IDLBRIDGE::EXECUTETIMER.
% Compiled module: APQUICKRED.
in APQUICKRED
% Compiled module: APGUNDEF.

===============================
Running APOGEE QUICK REDUCTION
===============================
Wed Jun  4 17:24:40 2014
% Compiled module: APGETDIR.
% Compiled module: ADDSLASH.
Using BPM = /data-ql/spectro/v0.6//cal/bpm/55577-00000037
Using PSF = /data-ql/spectro/v0.6//cal/psf/09710014

-----------------------------------------------------------
Processing Frame = 12510003  Nreads=3
-----------------------------------------------------------

Step 1 - Bundling
-----------------

% Compiled mofailed to load driver: swrast
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
Nfiles = 3 for 12510003
% Compiled module: FITS_READ.
% Compiled module: FITS_OPEN.
% Compiled module: SXPAR.
% Compiled module: GETTOK.
% Compiled module: SXDELPAR.
% Compiled module: XMANAGER.
% Compiled module: FITS_CLOSE.
Writing bundled file to /data/apogee/archive/56813/apR-[abc]-12510003.fits
% Compiled module: SXADDPAR.
% Compiled module: FITS_ADD_CHECKSUM.
% Compiled module: CHECKSUM32.
% Compiled module: N_BYTES.
% Compiled module: IS_IEEE_BIG.
% Compiled module: FITS_ASCII_ENCODE.
% Compiled module: MWRFITS.
% Compiled module: FXPAR.
% Compiled module: FXADDPAR.
% Compiled module: VALID_NUM.
APQL_FITSHEADER ...
dt = 0.15857315 sec
% Compiled module: APQL_DBINSERT_CALLBACK.
<PtrHeapVar30>  STRUCT    = -> <Anonymous> Array[1]
7 ql Message = UTR=DONE
Inserting basic information for  -> ap
% Compiled module: HOST_TO_IEEE.
Inserting S/N information
Inserting exposure_pk information 68769
Inserting required fits keywords error information
% Compiled module: REVERSE.
% Compiled module: DETABIFY.
dt = 3.2471519 sec

Step 2 - Collapsing the datacube
--------------------------------

% Compiled module: AP3DQUICK.
% Compiled module: HEADFITS.
% Compiled module: FXPOSIT.
% Compiled module: MRD_HREAD.
Processing /data/apogee/archive/56813/apR-a-12510003.fits  Nreads=3
Using BPM file = /data-ql/spectro/v0.6//cal/bpm/apBPM-a-55577-00000037.fits
% Compiled module: MAD.
Using FOWLER sampling. NFOWLER=1
% Compiled module: MEAN.
% Compiled module: MOMENT.
% Compiled module: SXADDHIST.
Writing output to: /data/apogee/quickred/56813/ap2D-a-12510003.fits
Saving FLUX/ERR as LONG instead of FLOAT
% Compiled module: FITS_WRITE.
% Compiled module: MKHDR.
dt = 1.9234509 sec
% Compiled module: PUSH.

Processing /data/apogee/archive/56813/apR-b-12510003.fits  Nreads=3
Using BPM file = /data-ql/spectro/v0.6//cal/bpm/apBPM-b-55577-00000037.fits
Using FOWLER sampling. NFOWLER=1
Writing output to: /data/apogee/quickred/56813/ap2D-b-12510003.fits
Saving FLUX/ERR as LONG instead of FLOAT
dt = 3.4844940 sec

Processing /data/apogee/archive/56813/apR-c-12510003.fits  Nreads=3
Using BPM file = /data-ql/spectro/v0.6//cal/bpm/apBPM-c-55577-00000037.fits
Using FOWLER sampling. NFOWLER=1
Writing output to: /data/apogee/quickred/56813/ap2D-c-12510003.fits
Saving FLUX/ERR as LONG instead of FLOAT
dt = 3.6386912 sec


Step 3 - Extracting the spectra
-------------------------------
Cannot do extraction for EXPTYPE=DARK
% Compiled module: APFILEINFO.
% Compiled module: STRSPLIT.
% Compiled module: FIRST_EL.
% Compiled module: FXMOVE.
% Compiled module: MRD_SKIP.
% Compiled module: GETMJD5.
% Compiled module: JULDAY.
% Compiled module: DATE2JD.
% Compiled module: CHECK_DATEFORMAT.

Step 4 - Compressing files
--------------------------

Compressing the bundled files
% Compiled module: APZIP.
% Compiled module: LOADINPUT.
3 Files input
1/3

Compressing >>/data/apogee/archive/56813/apR-a-12510003.fits<< (31.50 MB)
Nreads = 3
Step I: Making dCounts temporary file
% Compiled module: MKTEMP.
Step II: Subtracting average dCounts
% Compiled module: MRDFITS.
Step III: Compressing with fpack
Input file size = 31504320 bytes
Output file size = 19992960 bytes
Compression ratio = 1.57577
dt = 6.7660630 sec

2/3

Compressing >>/data/apogee/archive/56813/apR-b-12510003.fits<< (31.50 MB)
Nreads = 3
Step I: Making dCounts temporary file
Step II: Subtracting average dCounts
Step III: Compressing with fpack
Input file size = 31504320 bytes
Output file size = 19422720 bytes
Compression ratio = 1.62203
dt = 8.3406210 sec

3/3

Compressing >>/data/apogee/archive/56813/apR-c-12510003.fits<< (31.50 MB)
Nreads = 3
Step I: Making dCounts temporary file
Step II: Subtracting average dCounts
Step III: Compressing with fpack
Input file size = 31504320 bytes
Output file size = 19238400 bytes
Compression ratio = 1.63757
dt = 7.0064931 sec

Compressing the 2D images with FPACK
Compressing /data/apogee/quickred/56813/ap2D-a-12510003.fits
Compressing /data/apogee/quickred/56813/ap2D-b-12510003.fits
Compressing /data/apogee/quickred/56813/ap2D-c-12510003.fits
Deleting Bundled files
% FILE_DELETE: Removed file: /data/apogee/archive/56813/apR-a-12510003.fits.
% FILE_DELETE: Removed file: /data/apogee/archive/56813/apR-b-12510003.fits.
% FILE_DELETE: Removed file: /data/apogee/archive/56813/apR-c-12510003.fits.

Step 5 - Database prep and insert
--------------------------

% Compiled module: APQUICKRED_DBPREP.
% Compiled module: ZSCALE.
% Compiled module: GOODPOLY.
% Compiled module: BADPAR.
% Compiled module: POLY_FIT.
% Compiled module: STDEV.
% Compiled module: POLY.
% Compiled module: APQUICKRED_DBINSERT.
starting apquickred_dbinsert ...
% Compiled module: GET_SQL_COL.
% Compiled module: GET_SQL_SETUP.
% Compiled module: IDL_SQL_DEFSYSV.
Inserting Quickred data
% Compiled module: REPSTR.
% Compiled module: EXEC_SQL.
% Compiled module: SET_SQL_COLARRAY.
Inserting Quickred IMBINZOOM
Inserting exposure header information
apquickred_dbinsert completed
dt = 5.5015171 sec.
dt = 44.605346 sec
Error reading apqlactor_lun -> testing the socket connection
8 ql Message = 
% PRINTF: Error encountered writing to file. Unit: 100
          File: localhost.10038
  Broken pipe
% PRINTF: Error encountered writing to file. Unit: 100
          File: localhost.10038
  Broken pipe
Error reading apqlactor_lun -> testing the socket connection
% PRINTF: Error encountered writing to file. Unit: 100
          File: localhost.10038
  Broken pipe
socket is close -> EXITING apql_wrapper

% Error encountered writing to file. Unit: 100
  File: localhost.10038
  Broken pipe
apqr_wrapper -> Connection from  127.0.0.1 38949
Connection from  127.0.0.1 44345