Sender: LSF System Subject: Job 224539: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Jan 10 17:35:20 2008 Results reported at Thu Jan 10 17:37:06 2008 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash ## # WARNING: THIS SCRIPT WAS AUTOMATICALLY GENERATED on Thu Jan 10 17:35:11 CST 2008 # dp version: v19_101 DP_DIR: /sdss/ups/prd/dp/v19_101/NULL # on host des01 user: hlin ## . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2008.01.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 53.61 sec. Max Memory : 12 MB Max Swap : 30 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Thu Jan 10 17:35:32 CST 2008 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Jan 10 17:35:54 CST 2008 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/lsf/v5_1/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_6g/Linux-2-4-2-3-2:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/ups/v4_7_3/Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin/:/data/des03.a/data/hlin/gemini/gmmps-V-0-22-REL/gmmps/bin:/data/des03.a/data/hlin/gemini/skycat-3.0/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_7/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v6_3/Linux/idl_6.3/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/idlutils/v5_2_0_1/Linux/bin:/sdss/ups/prd/idlspec2d/v5_3_2b/Linux/bin:/sdss/ups/prd/spectro/v5_10_4b/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v19_101/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Thu Jan 10 17:35:54 CST 2008 ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DAS_ADMIN_DIR=/sdss/ups/prd/das_admin/v1_5_0/NULL DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v19_101/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_1/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_6g/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v6_3/Linux/idl_6.3 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v5_3_2b/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v5_2_0_1/Linux IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v6_3/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_7/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_10_4b/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/sdss/ups/prd/ups/v4_7_3/Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Thu Jan 10 17:35:55 CST 2008 Begin running plate --------------------------------------------------------------- Thu Jan 10 17:35:55 CST 2008 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x919f5bc makePlates : beginning loop over plObs chain; makePlates : making 5 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapT-8451.par makePlates : plateInfo struct for plate 2937 : (h2).mjd 54511 (h2).raCen 71.403 (h2).decCen -5.683 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 71.403 -5.683 71.403 -4.183 plMakePlateFromTile : mjd of obs : 54511.502233 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -5.655 -0.004 -4.156 The rotation angle of the fid. point is 0.046551 plMakePlateFromTile : beginning loop over 1663 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapT-8452.par makePlates : plateInfo struct for plate 2938 : (h2).mjd 54511 (h2).raCen 107.242 (h2).decCen 39.407 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 107.242 39.407 107.242 40.907 plMakePlateFromTile : mjd of obs : 54511.560073 Observed HA/dec of plate center, fiducial point (deg) : -15.002 39.394 -15.004 40.894 The rotation angle of the fid. point is 114.080434 plMakePlateFromTile : beginning loop over 1758 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapT-8453.par makePlates : plateInfo struct for plate 2939 : (h2).mjd 54511 (h2).raCen 116.1866 (h2).decCen 66.1095 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.187 66.109 116.187 67.609 plMakePlateFromTile : mjd of obs : 54511.585016 Observed HA/dec of plate center, fiducial point (deg) : -15.002 66.082 -15.009 67.581 The rotation angle of the fid. point is 157.504253 plMakePlateFromTile : beginning loop over 1656 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapT-8454.par makePlates : plateInfo struct for plate 2940 : (h2).mjd 54511 (h2).raCen 119 (h2).decCen 9.5 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.000 9.500 119.000 11.000 plMakePlateFromTile : mjd of obs : 54511.550996 Observed HA/dec of plate center, fiducial point (deg) : -30.002 9.487 -30.004 10.986 The rotation angle of the fid. point is 45.485554 plMakePlateFromTile : beginning loop over 1827 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapT-8455.par makePlates : plateInfo struct for plate 2941 : (h2).mjd 54511 (h2).raCen 111.292 (h2).decCen 37.624 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 111.292 37.624 111.292 39.124 plMakePlateFromTile : mjd of obs : 54511.571284 Observed HA/dec of plate center, fiducial point (deg) : -15.002 37.608 -15.004 39.108 The rotation angle of the fid. point is 107.091128 plMakePlateFromTile : beginning loop over 1842 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Jan 10 17:36:11 CST 2008 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 5 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapP-2937.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 34 149 2 23 111 3 25 128 4 23 158 5 28 165 6 21 113 7 25 122 8 41 129 9 26 150 10 43 237 11 30 153 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6708 40 6 57 73 plFiberPlate : adding spectro-photo std with objId = 6708 40 5 57 55 plFiberPlate : adding spectro-photo std with objId = 6708 40 6 47 111 plFiberPlate : adding spectro-photo std with objId = 6708 40 5 47 14 plFiberPlate : adding spectro-photo std with objId = 6708 40 4 47 57 plFiberPlate : adding spectro-photo std with objId = 6708 40 4 46 83 plFiberPlate : adding spectro-photo std with objId = 6708 40 3 46 134 plFiberPlate : adding spectro-photo std with objId = 6708 40 3 45 102 plFiberPlate : 173 possible sky positions to use as objects from a possible 772. plFiberPlate : 117 possible sky positions to use as objects from a possible 771. plFiberPlate : 98 possible sky positions to use as objects from a possible 770. plFiberPlate : 51 possible sky positions to use as objects from a possible 769. plFiberPlate : 47 possible sky positions to use as objects from a possible 768. plFiberPlate : 40 possible sky positions to use as objects from a possible 767. plFiberPlate : 54 possible sky positions to use as objects from a possible 766. plFiberPlate : 116 possible sky positions to use as objects from a possible 765. plFiberPlate : 102 possible sky positions to use as objects from a possible 764. plFiberPlate : 74 possible sky positions to use as objects from a possible 763. plFiberPlate : 41 possible sky positions to use as objects from a possible 762. plFiberPlate : 29 possible sky positions to use as objects from a possible 761. plFiberPlate : 16 possible sky positions to use as objects from a possible 760. plFiberPlate : 21 possible sky positions to use as objects from a possible 759. plFiberPlate : 31 possible sky positions to use as objects from a possible 758. plFiberPlate : 31 possible sky positions to use as objects from a possible 757. plFiberPlate : 104 possible sky positions to use as objects from a possible 756. plFiberPlate : 82 possible sky positions to use as objects from a possible 755. plFiberPlate : 48 possible sky positions to use as objects from a possible 754. plFiberPlate : 28 possible sky positions to use as objects from a possible 753. plFiberPlate : 21 possible sky positions to use as objects from a possible 752. plFiberPlate : 19 possible sky positions to use as objects from a possible 751. plFiberPlate : 18 possible sky positions to use as objects from a possible 750. plFiberPlate : 9 possible sky positions to use as objects from a possible 749. plFiberPlate : 12 possible sky positions to use as objects from a possible 748. plFiberPlate : 44 possible sky positions to use as objects from a possible 747. plFiberPlate : 28 possible sky positions to use as objects from a possible 746. plFiberPlate : 15 possible sky positions to use as objects from a possible 745. plFiberPlate : 22 possible sky positions to use as objects from a possible 744. plFiberPlate : 13 possible sky positions to use as objects from a possible 743. plFiberPlate : 11 possible sky positions to use as objects from a possible 742. plFiberPlate : 16 possible sky positions to use as objects from a possible 741. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 726 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2937.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2937.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapP-2938.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 46 109 2 27 78 3 37 87 4 28 124 5 12 136 6 17 84 7 13 105 8 25 133 9 19 147 10 54 155 11 44 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6573 40 6 167 186 plFiberPlate : adding spectro-photo std with objId = 6573 40 6 166 382 plFiberPlate : adding spectro-photo std with objId = 6573 40 5 162 157 plFiberPlate : adding spectro-photo std with objId = 6573 40 5 162 58 plFiberPlate : adding spectro-photo std with objId = 6573 40 4 162 424 plFiberPlate : adding spectro-photo std with objId = 6573 40 4 162 237 plFiberPlate : adding spectro-photo std with objId = 6573 40 2 162 62 plFiberPlate : adding spectro-photo std with objId = 6573 40 3 161 206 plFiberPlate : 137 possible sky positions to use as objects from a possible 634. plFiberPlate : 88 possible sky positions to use as objects from a possible 633. plFiberPlate : 63 possible sky positions to use as objects from a possible 632. plFiberPlate : 22 possible sky positions to use as objects from a possible 631. plFiberPlate : 35 possible sky positions to use as objects from a possible 630. plFiberPlate : 16 possible sky positions to use as objects from a possible 629. plFiberPlate : 53 possible sky positions to use as objects from a possible 628. plFiberPlate : 78 possible sky positions to use as objects from a possible 627. plFiberPlate : 75 possible sky positions to use as objects from a possible 626. plFiberPlate : 40 possible sky positions to use as objects from a possible 625. plFiberPlate : 32 possible sky positions to use as objects from a possible 624. plFiberPlate : 16 possible sky positions to use as objects from a possible 623. plFiberPlate : 14 possible sky positions to use as objects from a possible 622. plFiberPlate : 9 possible sky positions to use as objects from a possible 621. plFiberPlate : 18 possible sky positions to use as objects from a possible 620. plFiberPlate : 13 possible sky positions to use as objects from a possible 619. plFiberPlate : 102 possible sky positions to use as objects from a possible 618. plFiberPlate : 87 possible sky positions to use as objects from a possible 617. plFiberPlate : 63 possible sky positions to use as objects from a possible 616. plFiberPlate : 41 possible sky positions to use as objects from a possible 615. plFiberPlate : 19 possible sky positions to use as objects from a possible 614. plFiberPlate : 21 possible sky positions to use as objects from a possible 613. plFiberPlate : 16 possible sky positions to use as objects from a possible 612. plFiberPlate : 33 possible sky positions to use as objects from a possible 611. plFiberPlate : 15 possible sky positions to use as objects from a possible 610. plFiberPlate : 42 possible sky positions to use as objects from a possible 609. plFiberPlate : 36 possible sky positions to use as objects from a possible 608. plFiberPlate : 24 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 23 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 815 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2937.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2938.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2938.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapP-2939.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 701 to list of science objects plFiberPlate : adding sky number 328 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 40 164 2 26 111 3 17 113 4 17 161 5 7 177 6 8 117 7 5 118 8 2 168 9 3 189 10 34 208 11 34 149 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4887 40 6 255 116 plFiberPlate : adding spectro-photo std with objId = 4887 40 2 248 20 plFiberPlate : adding spectro-photo std with objId = 4887 40 5 245 100 plFiberPlate : adding spectro-photo std with objId = 4887 40 5 244 130 plFiberPlate : adding spectro-photo std with objId = 4887 40 2 244 178 plFiberPlate : adding spectro-photo std with objId = 4887 40 4 243 16 plFiberPlate : adding spectro-photo std with objId = 4887 40 3 243 6 plFiberPlate : adding spectro-photo std with objId = 4887 40 3 242 141 plFiberPlate : 162 possible sky positions to use as objects from a possible 833. plFiberPlate : 138 possible sky positions to use as objects from a possible 832. plFiberPlate : 97 possible sky positions to use as objects from a possible 831. plFiberPlate : 52 possible sky positions to use as objects from a possible 830. plFiberPlate : 32 possible sky positions to use as objects from a possible 829. plFiberPlate : 61 possible sky positions to use as objects from a possible 828. plFiberPlate : 62 possible sky positions to use as objects from a possible 827. plFiberPlate : 125 possible sky positions to use as objects from a possible 826. plFiberPlate : 96 possible sky positions to use as objects from a possible 825. plFiberPlate : 75 possible sky positions to use as objects from a possible 824. plFiberPlate : 43 possible sky positions to use as objects from a possible 823. plFiberPlate : 17 possible sky positions to use as objects from a possible 822. plFiberPlate : 24 possible sky positions to use as objects from a possible 821. plFiberPlate : 25 possible sky positions to use as objects from a possible 820. plFiberPlate : 17 possible sky positions to use as objects from a possible 819. plFiberPlate : 32 possible sky positions to use as objects from a possible 818. plFiberPlate : 137 possible sky positions to use as objects from a possible 817. plFiberPlate : 111 possible sky positions to use as objects from a possible 816. plFiberPlate : 85 possible sky positions to use as objects from a possible 815. plFiberPlate : 56 possible sky positions to use as objects from a possible 814. plFiberPlate : 33 possible sky positions to use as objects from a possible 813. plFiberPlate : 30 possible sky positions to use as objects from a possible 812. plFiberPlate : 19 possible sky positions to use as objects from a possible 811. plFiberPlate : 29 possible sky positions to use as objects from a possible 810. plFiberPlate : 32 possible sky positions to use as objects from a possible 809. plFiberPlate : 64 possible sky positions to use as objects from a possible 808. plFiberPlate : 58 possible sky positions to use as objects from a possible 807. plFiberPlate : 37 possible sky positions to use as objects from a possible 806. plFiberPlate : 29 possible sky positions to use as objects from a possible 805. plFiberPlate : 29 possible sky positions to use as objects from a possible 804. plFiberPlate : 25 possible sky positions to use as objects from a possible 803. plFiberPlate : 28 possible sky positions to use as objects from a possible 802. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 762 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2938.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2939.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2939.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapP-2940.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 49 123 2 37 67 3 38 78 4 35 108 5 26 122 6 34 98 7 27 115 8 30 131 9 26 144 10 77 150 11 53 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 32 30 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 28 206 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 27 288 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 27 150 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 26 93 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 26 312 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 26 233 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 25 462 plFiberPlate : 116 possible sky positions to use as objects from a possible 614. plFiberPlate : 88 possible sky positions to use as objects from a possible 613. plFiberPlate : 69 possible sky positions to use as objects from a possible 612. plFiberPlate : 50 possible sky positions to use as objects from a possible 611. plFiberPlate : 33 possible sky positions to use as objects from a possible 610. plFiberPlate : 30 possible sky positions to use as objects from a possible 609. plFiberPlate : 78 possible sky positions to use as objects from a possible 608. plFiberPlate : 78 possible sky positions to use as objects from a possible 607. plFiberPlate : 66 possible sky positions to use as objects from a possible 606. plFiberPlate : 48 possible sky positions to use as objects from a possible 605. plFiberPlate : 28 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 91 possible sky positions to use as objects from a possible 598. plFiberPlate : 72 possible sky positions to use as objects from a possible 597. plFiberPlate : 56 possible sky positions to use as objects from a possible 596. plFiberPlate : 30 possible sky positions to use as objects from a possible 595. plFiberPlate : 19 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 30 possible sky positions to use as objects from a possible 591. plFiberPlate : 24 possible sky positions to use as objects from a possible 590. plFiberPlate : 40 possible sky positions to use as objects from a possible 589. plFiberPlate : 36 possible sky positions to use as objects from a possible 588. plFiberPlate : 34 possible sky positions to use as objects from a possible 587. plFiberPlate : 25 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 21 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 817 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2939.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2940.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2940.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.4/plPlugMapP-2941.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 55 140 2 49 124 3 23 128 4 21 144 5 36 145 6 19 141 7 16 127 8 41 147 9 13 167 10 58 225 11 58 154 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 27 290 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 26 52 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 21 303 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 21 114 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 17 75 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 17 46 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 15 68 plFiberPlate : adding spectro-photo std with objId = 4204 40 4 14 252 plFiberPlate : 178 possible sky positions to use as objects from a possible 786. plFiberPlate : 109 possible sky positions to use as objects from a possible 785. plFiberPlate : 60 possible sky positions to use as objects from a possible 784. plFiberPlate : 38 possible sky positions to use as objects from a possible 783. plFiberPlate : 45 possible sky positions to use as objects from a possible 782. plFiberPlate : 37 possible sky positions to use as objects from a possible 781. plFiberPlate : 58 possible sky positions to use as objects from a possible 780. plFiberPlate : 123 possible sky positions to use as objects from a possible 779. plFiberPlate : 102 possible sky positions to use as objects from a possible 778. plFiberPlate : 75 possible sky positions to use as objects from a possible 777. plFiberPlate : 47 possible sky positions to use as objects from a possible 776. plFiberPlate : 21 possible sky positions to use as objects from a possible 775. plFiberPlate : 28 possible sky positions to use as objects from a possible 774. plFiberPlate : 13 possible sky positions to use as objects from a possible 773. plFiberPlate : 14 possible sky positions to use as objects from a possible 772. plFiberPlate : 24 possible sky positions to use as objects from a possible 771. plFiberPlate : 90 possible sky positions to use as objects from a possible 770. plFiberPlate : 86 possible sky positions to use as objects from a possible 769. plFiberPlate : 63 possible sky positions to use as objects from a possible 768. plFiberPlate : 24 possible sky positions to use as objects from a possible 767. plFiberPlate : 31 possible sky positions to use as objects from a possible 766. plFiberPlate : 12 possible sky positions to use as objects from a possible 765. plFiberPlate : 24 possible sky positions to use as objects from a possible 764. plFiberPlate : 30 possible sky positions to use as objects from a possible 763. plFiberPlate : 18 possible sky positions to use as objects from a possible 762. plFiberPlate : 78 possible sky positions to use as objects from a possible 761. plFiberPlate : 54 possible sky positions to use as objects from a possible 760. plFiberPlate : 38 possible sky positions to use as objects from a possible 759. plFiberPlate : 33 possible sky positions to use as objects from a possible 758. plFiberPlate : 24 possible sky positions to use as objects from a possible 757. plFiberPlate : 14 possible sky positions to use as objects from a possible 756. plFiberPlate : 23 possible sky positions to use as objects from a possible 755. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 780 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2940.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2941.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.4/plOverlay-2941.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Jan 10 17:36:24 CST 2008 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 5 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 64 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2937.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2937.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.5454,8.0252) and (-3.81,11.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2937.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 153 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2938.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2938.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2938.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 100 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2939.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2939.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2939.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 155 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2940.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2940.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2940.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 118 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2941.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2941.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.4/plFanuc-2941.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Jan 10 17:36:38 CST 2008 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x8d3492c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 5 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2937 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 726 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2938 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 815 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2939 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 762 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2940 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 817 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2941 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 780 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Jan 10 17:36:46 CST 2008 Begin running "plateEnder dr2008.01.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2008.01.4 -morePipes 1" failed. PS: Read file for stderr output of this job.