Sender: LSF System Subject: Job 34306: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Oct 3 14:21:44 2001 Results reported at Wed Oct 3 14:24:42 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_7 -f OSF1 -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.10 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 140.90 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Oct 3 14:21:45 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Oct 3 14:21:50 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_12:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_5_3OSF1-V4/bin:/home/s1/jen_a/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5/bin:/p/OSF1/photo/v5_2_26/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/OSF1/dp/v11_7/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_11/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_1/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Wed Oct 3 14:21:50 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_5 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_1 DP_DIR=/p/OSF1/dp/v11_7 DUST_DIR=/p/IRIX6/dust/v1_0 ENCP_DIR=/p/OSF1/encp/v2_12 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INFO_DIR=/fnal/ups/prd/Info/v1_6 INT_DIR=/p/OSF1/dervish/v8_1/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_2 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_26 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_11 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_5_3OSF1-V4 --------------------------------------------------------------- Wed Oct 3 14:21:50 CDT 2001 Begin running plate --------------------------------------------------------------- Wed Oct 3 14:21:50 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e03fe8 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0512.par makePlates : plateInfo struct for plate 716 : (h2).mjd 52504 (h2).raCen 329.462 (h2).decCen -8.137394 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 329.462 -8.137 329.462 -6.637 plMakePlateFromTile : mjd of obs : 52504.713299 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -8.111 -0.002 -6.612 The rotation angle of the fid. point is -0.004937 plMakePlateFromTile : beginning loop over 1356 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0511.par makePlates : plateInfo struct for plate 717 : (h2).mjd 52504 (h2).raCen 330.7189 (h2).decCen -8.305002 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 330.719 -8.305 330.719 -6.805 plMakePlateFromTile : mjd of obs : 52504.716781 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -8.278 -0.002 -6.779 The rotation angle of the fid. point is -0.004726 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0510.par makePlates : plateInfo struct for plate 718 : (h2).mjd 52504 (h2).raCen 332.3275 (h2).decCen -8.452941 (h2).haCen -2 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.327 -8.453 332.327 -6.953 plMakePlateFromTile : mjd of obs : 52504.715695 Observed HA/dec of plate center, fiducial point (deg) : -2.002 -8.426 -2.002 -6.927 The rotation angle of the fid. point is 2.546794 plMakePlateFromTile : beginning loop over 1371 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0509.par makePlates : plateInfo struct for plate 719 : (h2).mjd 52504 (h2).raCen 334.0191 (h2).decCen -8.597623 (h2).haCen 10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 334.019 -8.598 334.019 -7.098 plMakePlateFromTile : mjd of obs : 52504.753633 Observed HA/dec of plate center, fiducial point (deg) : 9.998 -8.570 9.998 -7.071 The rotation angle of the fid. point is -12.503704 plMakePlateFromTile : beginning loop over 1406 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0508.par makePlates : plateInfo struct for plate 720 : (h2).mjd 52504 (h2).raCen 335.827 (h2).decCen -8.757298 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 335.827 -8.757 335.827 -7.257 plMakePlateFromTile : mjd of obs : 52504.755870 Observed HA/dec of plate center, fiducial point (deg) : 8.998 -8.729 8.998 -7.230 The rotation angle of the fid. point is -11.257528 plMakePlateFromTile : beginning loop over 1414 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0507.par makePlates : plateInfo struct for plate 721 : (h2).mjd 52504 (h2).raCen 337.7759 (h2).decCen -8.925592 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 337.776 -8.926 337.776 -7.426 plMakePlateFromTile : mjd of obs : 52504.755727 Observed HA/dec of plate center, fiducial point (deg) : 6.998 -8.897 6.998 -7.398 The rotation angle of the fid. point is -8.778385 plMakePlateFromTile : beginning loop over 1386 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0506.par makePlates : plateInfo struct for plate 722 : (h2).mjd 52504 (h2).raCen 339.722 (h2).decCen -9.062921 (h2).haCen 20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 339.722 -9.063 339.722 -7.563 plMakePlateFromTile : mjd of obs : 52504.797143 Observed HA/dec of plate center, fiducial point (deg) : 19.998 -9.034 19.998 -7.535 The rotation angle of the fid. point is -23.592854 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0505.par makePlates : plateInfo struct for plate 723 : (h2).mjd 52504 (h2).raCen 341.8665 (h2).decCen -9.203276 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 341.866 -9.203 341.866 -7.703 plMakePlateFromTile : mjd of obs : 52504.797541 Observed HA/dec of plate center, fiducial point (deg) : 17.998 -9.174 17.998 -7.675 The rotation angle of the fid. point is -21.438230 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0504.par makePlates : plateInfo struct for plate 724 : (h2).mjd 52504 (h2).raCen 343.8328 (h2).decCen -9.350784 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 343.833 -9.351 343.833 -7.851 plMakePlateFromTile : mjd of obs : 52504.797445 Observed HA/dec of plate center, fiducial point (deg) : 15.998 -9.321 15.998 -7.822 The rotation angle of the fid. point is -19.216458 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0503.par makePlates : plateInfo struct for plate 725 : (h2).mjd 52504 (h2).raCen 345.855 (h2).decCen -9.461805 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 345.855 -9.462 345.855 -7.962 plMakePlateFromTile : mjd of obs : 52504.797504 Observed HA/dec of plate center, fiducial point (deg) : 13.998 -9.432 13.998 -7.933 The rotation angle of the fid. point is -16.946860 plMakePlateFromTile : beginning loop over 1315 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk23/complete//plPlugMapT-0502.par makePlates : plateInfo struct for plate 726 : (h2).mjd 52504 (h2).raCen 347.9454 (h2).decCen -9.573511 (h2).haCen 27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 347.945 -9.574 347.945 -8.074 plMakePlateFromTile : mjd of obs : 52504.839321 Observed HA/dec of plate center, fiducial point (deg) : 26.998 -9.543 26.998 -8.043 The rotation angle of the fid. point is -30.126143 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Oct 3 14:22:22 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 11 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0716.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 136 2 18 94 3 18 63 4 24 106 5 24 115 6 12 59 7 15 61 8 19 111 9 15 79 10 39 134 11 32 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 49 146 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 55 61 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 54 8 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 165 27 plFiberPlate : adding spectro-photo std with objId = 2576 0 5 48 85 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 142 30 plFiberPlate : adding spectro-photo std with objId = 1659 2 4 169 25 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 57 14 plFiberPlate : 79 possible sky positions to use as objects from a possible 547. plFiberPlate : 66 possible sky positions to use as objects from a possible 546. plFiberPlate : 58 possible sky positions to use as objects from a possible 545. plFiberPlate : 47 possible sky positions to use as objects from a possible 544. plFiberPlate : 30 possible sky positions to use as objects from a possible 543. plFiberPlate : 28 possible sky positions to use as objects from a possible 542. plFiberPlate : 74 possible sky positions to use as objects from a possible 541. plFiberPlate : 74 possible sky positions to use as objects from a possible 540. plFiberPlate : 43 possible sky positions to use as objects from a possible 539. plFiberPlate : 32 possible sky positions to use as objects from a possible 538. plFiberPlate : 26 possible sky positions to use as objects from a possible 537. plFiberPlate : 21 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 32 possible sky positions to use as objects from a possible 534. plFiberPlate : 15 possible sky positions to use as objects from a possible 533. plFiberPlate : 22 possible sky positions to use as objects from a possible 532. plFiberPlate : 25 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : 6 possible sky positions to use as objects from a possible 529. plFiberPlate : 6 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : 6 possible sky positions to use as objects from a possible 526. plFiberPlate : 4 possible sky positions to use as objects from a possible 525. plFiberPlate : 15 possible sky positions to use as objects from a possible 524. plFiberPlate : 22 possible sky positions to use as objects from a possible 523. plFiberPlate : 30 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 5 possible sky positions to use as objects from a possible 519. plFiberPlate : 0 possible sky positions to use as objects from a possible 518. plFiberPlate: No sky found for bundle at -3.368 218.021, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 518. plFiberPlate: No sky found for bundle at -3.368 218.021, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 518. plFiberPlate: No sky found for bundle at -3.368 218.021, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 518. plFiberPlate: No sky found for bundle at -3.368 218.021, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 518. plFiberPlate: No sky found for bundle at -3.368 218.021, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 518. plFiberPlate: No sky found for bundle at -3.368 218.021, increase box by 60 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 24 possible sky positions to use as objects from a possible 516. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0716.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0716.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0717.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 117 2 19 63 3 12 68 4 25 117 5 19 111 6 11 79 7 8 63 8 19 99 9 13 107 10 36 132 11 30 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 6 175 12 plFiberPlate : adding spectro-photo std with objId = 1659 2 3 179 84 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 165 27 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 54 8 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 173 57 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 61 119 plFiberPlate : adding spectro-photo std with objId = 1659 2 4 169 25 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 57 14 plFiberPlate : 120 possible sky positions to use as objects from a possible 523. plFiberPlate : 46 possible sky positions to use as objects from a possible 522. plFiberPlate : 11 possible sky positions to use as objects from a possible 521. plFiberPlate : 13 possible sky positions to use as objects from a possible 520. plFiberPlate : 20 possible sky positions to use as objects from a possible 519. plFiberPlate : 32 possible sky positions to use as objects from a possible 518. plFiberPlate : 48 possible sky positions to use as objects from a possible 517. plFiberPlate : 93 possible sky positions to use as objects from a possible 516. plFiberPlate : 60 possible sky positions to use as objects from a possible 515. plFiberPlate : 30 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 13 possible sky positions to use as objects from a possible 511. plFiberPlate : 20 possible sky positions to use as objects from a possible 510. plFiberPlate : 23 possible sky positions to use as objects from a possible 509. plFiberPlate : 11 possible sky positions to use as objects from a possible 508. plFiberPlate : 44 possible sky positions to use as objects from a possible 507. plFiberPlate : 49 possible sky positions to use as objects from a possible 506. plFiberPlate : 44 possible sky positions to use as objects from a possible 505. plFiberPlate : 43 possible sky positions to use as objects from a possible 504. plFiberPlate : 26 possible sky positions to use as objects from a possible 503. plFiberPlate : 12 possible sky positions to use as objects from a possible 502. plFiberPlate : 11 possible sky positions to use as objects from a possible 501. plFiberPlate : 23 possible sky positions to use as objects from a possible 500. plFiberPlate : 25 possible sky positions to use as objects from a possible 499. plFiberPlate : 29 possible sky positions to use as objects from a possible 498. plFiberPlate : 35 possible sky positions to use as objects from a possible 497. plFiberPlate : 21 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0716.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0717.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0717.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0718.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 34 103 2 28 51 3 29 55 4 31 106 5 27 121 6 14 71 7 10 64 8 18 112 9 17 102 10 47 129 11 32 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 189 28 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 185 71 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 77 123 plFiberPlate : adding spectro-photo std with objId = 1659 2 2 186 127 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 75 18 plFiberPlate : adding spectro-photo std with objId = 1659 2 6 178 70 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 82 85 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 80 73 plFiberPlate : 113 possible sky positions to use as objects from a possible 520. plFiberPlate : 59 possible sky positions to use as objects from a possible 519. plFiberPlate : 26 possible sky positions to use as objects from a possible 518. plFiberPlate : 14 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 31 possible sky positions to use as objects from a possible 515. plFiberPlate : 43 possible sky positions to use as objects from a possible 514. plFiberPlate : 80 possible sky positions to use as objects from a possible 513. plFiberPlate : 75 possible sky positions to use as objects from a possible 512. plFiberPlate : 52 possible sky positions to use as objects from a possible 511. plFiberPlate : 19 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 22 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 16 possible sky positions to use as objects from a possible 506. plFiberPlate : 14 possible sky positions to use as objects from a possible 505. plFiberPlate : 100 possible sky positions to use as objects from a possible 504. plFiberPlate : 67 possible sky positions to use as objects from a possible 503. plFiberPlate : 32 possible sky positions to use as objects from a possible 502. plFiberPlate : 9 possible sky positions to use as objects from a possible 501. plFiberPlate : 5 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 36 possible sky positions to use as objects from a possible 498. plFiberPlate : 27 possible sky positions to use as objects from a possible 497. plFiberPlate : 13 possible sky positions to use as objects from a possible 496. plFiberPlate : 40 possible sky positions to use as objects from a possible 495. plFiberPlate : 18 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : 7 possible sky positions to use as objects from a possible 492. plFiberPlate : 4 possible sky positions to use as objects from a possible 491. plFiberPlate : 9 possible sky positions to use as objects from a possible 490. plFiberPlate : 13 possible sky positions to use as objects from a possible 489. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0717.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0718.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0718.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0719.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 127 2 14 71 3 17 54 4 26 89 5 23 143 6 15 86 7 16 59 8 19 104 9 21 102 10 35 128 11 22 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 83 28 plFiberPlate : adding spectro-photo std with objId = 1659 2 2 186 127 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 75 18 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 82 106 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 80 73 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 192 42 plFiberPlate : adding spectro-photo std with objId = 1659 2 6 198 57 plFiberPlate : adding spectro-photo std with objId = 1659 2 3 194 24 plFiberPlate : 96 possible sky positions to use as objects from a possible 545. plFiberPlate : 64 possible sky positions to use as objects from a possible 544. plFiberPlate : 36 possible sky positions to use as objects from a possible 543. plFiberPlate : 24 possible sky positions to use as objects from a possible 542. plFiberPlate : 9 possible sky positions to use as objects from a possible 541. plFiberPlate : 16 possible sky positions to use as objects from a possible 540. plFiberPlate : 88 possible sky positions to use as objects from a possible 539. plFiberPlate : 94 possible sky positions to use as objects from a possible 538. plFiberPlate : 69 possible sky positions to use as objects from a possible 537. plFiberPlate : 45 possible sky positions to use as objects from a possible 536. plFiberPlate : 25 possible sky positions to use as objects from a possible 535. plFiberPlate : 7 possible sky positions to use as objects from a possible 534. plFiberPlate : 4 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 50 possible sky positions to use as objects from a possible 530. plFiberPlate : 80 possible sky positions to use as objects from a possible 529. plFiberPlate : 64 possible sky positions to use as objects from a possible 528. plFiberPlate : 40 possible sky positions to use as objects from a possible 527. plFiberPlate : 20 possible sky positions to use as objects from a possible 526. plFiberPlate : 7 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 7 possible sky positions to use as objects from a possible 523. plFiberPlate : 46 possible sky positions to use as objects from a possible 522. plFiberPlate : 15 possible sky positions to use as objects from a possible 521. plFiberPlate : 79 possible sky positions to use as objects from a possible 520. plFiberPlate : 36 possible sky positions to use as objects from a possible 519. plFiberPlate : 19 possible sky positions to use as objects from a possible 518. plFiberPlate : 13 possible sky positions to use as objects from a possible 517. plFiberPlate : 9 possible sky positions to use as objects from a possible 516. plFiberPlate : 9 possible sky positions to use as objects from a possible 515. plFiberPlate : 21 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0718.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0719.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0719.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0720.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 117 2 31 85 3 24 78 4 26 114 5 22 130 6 12 77 7 14 73 8 25 97 9 17 94 10 44 141 11 30 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 100 25 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 209 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 3 213 29 plFiberPlate : adding spectro-photo std with objId = 1659 2 2 210 16 plFiberPlate : adding spectro-photo std with objId = 1659 2 4 212 11 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 96 98 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 94 76 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 103 4 plFiberPlate : 117 possible sky positions to use as objects from a possible 545. plFiberPlate : 75 possible sky positions to use as objects from a possible 544. plFiberPlate : 30 possible sky positions to use as objects from a possible 543. plFiberPlate : 16 possible sky positions to use as objects from a possible 542. plFiberPlate : 29 possible sky positions to use as objects from a possible 541. plFiberPlate : 26 possible sky positions to use as objects from a possible 540. plFiberPlate : 45 possible sky positions to use as objects from a possible 539. plFiberPlate : 65 possible sky positions to use as objects from a possible 538. plFiberPlate : 48 possible sky positions to use as objects from a possible 537. plFiberPlate : 33 possible sky positions to use as objects from a possible 536. plFiberPlate : 9 possible sky positions to use as objects from a possible 535. plFiberPlate : 6 possible sky positions to use as objects from a possible 534. plFiberPlate : 6 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 23 possible sky positions to use as objects from a possible 531. plFiberPlate : 5 possible sky positions to use as objects from a possible 530. plFiberPlate : 69 possible sky positions to use as objects from a possible 529. plFiberPlate : 36 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 10 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 8 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 23 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 59 possible sky positions to use as objects from a possible 520. plFiberPlate : 42 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 8 possible sky positions to use as objects from a possible 517. plFiberPlate : 9 possible sky positions to use as objects from a possible 516. plFiberPlate : 4 possible sky positions to use as objects from a possible 515. plFiberPlate : 20 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0719.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0720.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0720.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0721.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 117 2 17 77 3 18 70 4 31 99 5 27 128 6 22 85 7 13 65 8 23 91 9 28 91 10 33 130 11 28 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 224 44 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 107 93 plFiberPlate : adding spectro-photo std with objId = 1659 2 4 212 11 plFiberPlate : adding spectro-photo std with objId = 1659 2 3 224 37 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 108 66 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 219 36 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 105 68 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 103 4 plFiberPlate : 106 possible sky positions to use as objects from a possible 521. plFiberPlate : 63 possible sky positions to use as objects from a possible 520. plFiberPlate : 54 possible sky positions to use as objects from a possible 519. plFiberPlate : 21 possible sky positions to use as objects from a possible 518. plFiberPlate : 30 possible sky positions to use as objects from a possible 517. plFiberPlate : 32 possible sky positions to use as objects from a possible 516. plFiberPlate : 49 possible sky positions to use as objects from a possible 515. plFiberPlate : 76 possible sky positions to use as objects from a possible 514. plFiberPlate : 48 possible sky positions to use as objects from a possible 513. plFiberPlate : 35 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 12 possible sky positions to use as objects from a possible 509. plFiberPlate : 11 possible sky positions to use as objects from a possible 508. plFiberPlate : 27 possible sky positions to use as objects from a possible 507. plFiberPlate : 26 possible sky positions to use as objects from a possible 506. plFiberPlate : 51 possible sky positions to use as objects from a possible 505. plFiberPlate : 28 possible sky positions to use as objects from a possible 504. plFiberPlate : 6 possible sky positions to use as objects from a possible 503. plFiberPlate : 7 possible sky positions to use as objects from a possible 502. plFiberPlate : 6 possible sky positions to use as objects from a possible 501. plFiberPlate : 3 possible sky positions to use as objects from a possible 500. plFiberPlate : 3 possible sky positions to use as objects from a possible 499. plFiberPlate : 18 possible sky positions to use as objects from a possible 498. plFiberPlate : 20 possible sky positions to use as objects from a possible 497. plFiberPlate : 61 possible sky positions to use as objects from a possible 496. plFiberPlate : 31 possible sky positions to use as objects from a possible 495. plFiberPlate : 13 possible sky positions to use as objects from a possible 494. plFiberPlate : 10 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 5 possible sky positions to use as objects from a possible 491. plFiberPlate : 14 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0720.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0721.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0721.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0722.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 122 2 12 71 3 17 59 4 23 103 5 21 105 6 11 57 7 13 53 8 17 89 9 16 89 10 32 131 11 20 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 125 66 plFiberPlate : adding spectro-photo std with objId = 1659 2 4 223 91 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 120 19 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 225 75 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 224 44 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 226 28 plFiberPlate : adding spectro-photo std with objId = 1659 2 3 224 37 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 131 24 plFiberPlate : 109 possible sky positions to use as objects from a possible 497. plFiberPlate : 59 possible sky positions to use as objects from a possible 496. plFiberPlate : 29 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 41 possible sky positions to use as objects from a possible 493. plFiberPlate : 14 possible sky positions to use as objects from a possible 492. plFiberPlate : 39 possible sky positions to use as objects from a possible 491. plFiberPlate : 82 possible sky positions to use as objects from a possible 490. plFiberPlate : 63 possible sky positions to use as objects from a possible 489. plFiberPlate : 42 possible sky positions to use as objects from a possible 488. plFiberPlate : 19 possible sky positions to use as objects from a possible 487. plFiberPlate : 17 possible sky positions to use as objects from a possible 486. plFiberPlate : 11 possible sky positions to use as objects from a possible 485. plFiberPlate : 23 possible sky positions to use as objects from a possible 484. plFiberPlate : 17 possible sky positions to use as objects from a possible 483. plFiberPlate : 12 possible sky positions to use as objects from a possible 482. plFiberPlate : 61 possible sky positions to use as objects from a possible 481. plFiberPlate : 42 possible sky positions to use as objects from a possible 480. plFiberPlate : 28 possible sky positions to use as objects from a possible 479. plFiberPlate : 14 possible sky positions to use as objects from a possible 478. plFiberPlate : 10 possible sky positions to use as objects from a possible 477. plFiberPlate : 11 possible sky positions to use as objects from a possible 476. plFiberPlate : 11 possible sky positions to use as objects from a possible 475. plFiberPlate : 16 possible sky positions to use as objects from a possible 474. plFiberPlate : 11 possible sky positions to use as objects from a possible 473. plFiberPlate : 37 possible sky positions to use as objects from a possible 472. plFiberPlate : 24 possible sky positions to use as objects from a possible 471. plFiberPlate : 11 possible sky positions to use as objects from a possible 470. plFiberPlate : 4 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0721.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0722.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0722.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0723.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 124 2 23 77 3 17 82 4 21 118 5 13 110 6 8 80 7 12 71 8 17 103 9 15 100 10 35 145 11 27 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 249 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 248 2 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 136 53 plFiberPlate : adding spectro-photo std with objId = 1659 2 6 248 10 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 127 53 plFiberPlate : adding spectro-photo std with objId = 2576 0 5 132 27 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 131 24 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 141 111 plFiberPlate : 137 possible sky positions to use as objects from a possible 553. plFiberPlate : 79 possible sky positions to use as objects from a possible 552. plFiberPlate : 59 possible sky positions to use as objects from a possible 551. plFiberPlate : 36 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 31 possible sky positions to use as objects from a possible 548. plFiberPlate : 52 possible sky positions to use as objects from a possible 547. plFiberPlate : 104 possible sky positions to use as objects from a possible 546. plFiberPlate : 69 possible sky positions to use as objects from a possible 545. plFiberPlate : 42 possible sky positions to use as objects from a possible 544. plFiberPlate : 32 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 15 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 20 possible sky positions to use as objects from a possible 539. plFiberPlate : 22 possible sky positions to use as objects from a possible 538. plFiberPlate : 49 possible sky positions to use as objects from a possible 537. plFiberPlate : 26 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 6 possible sky positions to use as objects from a possible 533. plFiberPlate : 3 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 14 possible sky positions to use as objects from a possible 530. plFiberPlate : 21 possible sky positions to use as objects from a possible 529. plFiberPlate : 57 possible sky positions to use as objects from a possible 528. plFiberPlate : 30 possible sky positions to use as objects from a possible 527. plFiberPlate : 24 possible sky positions to use as objects from a possible 526. plFiberPlate : 20 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 7 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0722.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0723.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0723.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0724.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 97 2 17 72 3 11 73 4 18 105 5 16 113 6 19 81 7 17 74 8 8 95 9 16 111 10 21 142 11 17 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 266 33 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 258 43 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 252 12 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 142 39 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 149 60 plFiberPlate : adding spectro-photo std with objId = 2576 0 4 146 44 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 147 24 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 141 111 plFiberPlate : 119 possible sky positions to use as objects from a possible 522. plFiberPlate : 73 possible sky positions to use as objects from a possible 521. plFiberPlate : 42 possible sky positions to use as objects from a possible 520. plFiberPlate : 30 possible sky positions to use as objects from a possible 519. plFiberPlate : 28 possible sky positions to use as objects from a possible 518. plFiberPlate : 22 possible sky positions to use as objects from a possible 517. plFiberPlate : 45 possible sky positions to use as objects from a possible 516. plFiberPlate : 83 possible sky positions to use as objects from a possible 515. plFiberPlate : 66 possible sky positions to use as objects from a possible 514. plFiberPlate : 34 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 7 possible sky positions to use as objects from a possible 510. plFiberPlate : 8 possible sky positions to use as objects from a possible 509. plFiberPlate : 13 possible sky positions to use as objects from a possible 508. plFiberPlate : 7 possible sky positions to use as objects from a possible 507. plFiberPlate : 80 possible sky positions to use as objects from a possible 506. plFiberPlate : 52 possible sky positions to use as objects from a possible 505. plFiberPlate : 35 possible sky positions to use as objects from a possible 504. plFiberPlate : 17 possible sky positions to use as objects from a possible 503. plFiberPlate : 12 possible sky positions to use as objects from a possible 502. plFiberPlate : 6 possible sky positions to use as objects from a possible 501. plFiberPlate : 12 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 22 possible sky positions to use as objects from a possible 498. plFiberPlate : 61 possible sky positions to use as objects from a possible 497. plFiberPlate : 40 possible sky positions to use as objects from a possible 496. plFiberPlate : 23 possible sky positions to use as objects from a possible 495. plFiberPlate : 17 possible sky positions to use as objects from a possible 494. plFiberPlate : 10 possible sky positions to use as objects from a possible 493. plFiberPlate : 4 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0723.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0724.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0724.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0725.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 124 2 12 72 3 17 59 4 21 103 5 16 123 6 12 74 7 11 59 8 11 116 9 8 91 10 26 131 11 16 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 165 8 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 164 6 plFiberPlate : adding spectro-photo std with objId = 1659 2 2 279 39 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 162 44 plFiberPlate : adding spectro-photo std with objId = 1659 2 1 267 82 plFiberPlate : adding spectro-photo std with objId = 1659 2 5 276 52 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 165 40 plFiberPlate : adding spectro-photo std with objId = 2576 0 5 168 22 plFiberPlate : 87 possible sky positions to use as objects from a possible 543. plFiberPlate : 41 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 16 possible sky positions to use as objects from a possible 540. plFiberPlate : 23 possible sky positions to use as objects from a possible 539. plFiberPlate : 30 possible sky positions to use as objects from a possible 538. plFiberPlate : 40 possible sky positions to use as objects from a possible 537. plFiberPlate : 67 possible sky positions to use as objects from a possible 536. plFiberPlate : 21 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : 11 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 24 possible sky positions to use as objects from a possible 529. plFiberPlate : 20 possible sky positions to use as objects from a possible 528. plFiberPlate : 101 possible sky positions to use as objects from a possible 527. plFiberPlate : 59 possible sky positions to use as objects from a possible 526. plFiberPlate : 30 possible sky positions to use as objects from a possible 525. plFiberPlate : 18 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 19 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 32 possible sky positions to use as objects from a possible 520. plFiberPlate : 18 possible sky positions to use as objects from a possible 519. plFiberPlate : 20 possible sky positions to use as objects from a possible 518. plFiberPlate : 19 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 3 possible sky positions to use as objects from a possible 515. plFiberPlate : 3 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 11 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0724.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0725.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0725.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10/plPlugMapP-0726.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 122 2 10 77 3 20 63 4 26 103 5 10 120 6 14 80 7 8 73 8 21 105 9 13 106 10 21 133 11 13 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 2 178 61 plFiberPlate : adding spectro-photo std with objId = 2576 0 1 174 20 plFiberPlate : adding spectro-photo std with objId = 2576 0 3 181 52 plFiberPlate : adding spectro-photo std with objId = 1659 2 2 279 39 plFiberPlate : adding spectro-photo std with objId = 2576 0 5 170 24 plFiberPlate : adding spectro-photo std with objId = 2576 0 5 179 4 plFiberPlate : adding spectro-photo std with objId = 2576 0 6 182 54 plFiberPlate : adding spectro-photo std with objId = 2576 0 5 168 22 plFiberPlate : 97 possible sky positions to use as objects from a possible 551. plFiberPlate : 65 possible sky positions to use as objects from a possible 550. plFiberPlate : 30 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 33 possible sky positions to use as objects from a possible 547. plFiberPlate : 31 possible sky positions to use as objects from a possible 546. plFiberPlate : 31 possible sky positions to use as objects from a possible 545. plFiberPlate : 75 possible sky positions to use as objects from a possible 544. plFiberPlate : 51 possible sky positions to use as objects from a possible 543. plFiberPlate : 25 possible sky positions to use as objects from a possible 542. plFiberPlate : 18 possible sky positions to use as objects from a possible 541. plFiberPlate : 6 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : 10 possible sky positions to use as objects from a possible 538. plFiberPlate : 13 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 73 possible sky positions to use as objects from a possible 535. plFiberPlate : 41 possible sky positions to use as objects from a possible 534. plFiberPlate : 16 possible sky positions to use as objects from a possible 533. plFiberPlate : 16 possible sky positions to use as objects from a possible 532. plFiberPlate : 8 possible sky positions to use as objects from a possible 531. plFiberPlate : 19 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 6 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : 55 possible sky positions to use as objects from a possible 526. plFiberPlate : 34 possible sky positions to use as objects from a possible 525. plFiberPlate : 17 possible sky positions to use as objects from a possible 524. plFiberPlate : 13 possible sky positions to use as objects from a possible 523. plFiberPlate : 18 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 13 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0725.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0726.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10/plOverlay-0726.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Oct 3 14:22:59 CDT 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 11 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0716.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0716.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0716.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0717.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0717.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0717.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0718.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.1832,-10.4749) and (6.33,-11.02) plMakeFanucCodes : fixed path between (-11.5136,-5.5882) and (-11.71,-4.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0718.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0718.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0719.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0719.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0719.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0720.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0720.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0720.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0721.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.1034,-5.8891) and (-11.77,-4.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0721.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0721.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0722.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8278,4.6278) and (12.11,4.04) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0722.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0722.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0723.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5989,-5.3688) and (-11.92,-4.55) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0723.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0723.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0724.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.7110,-8.2724) and (11.06,-6.39) plMakeFanucCodes : fixed path between (11.0626,-6.3879) and (11.48,-5.36) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0724.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0724.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0725.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0725.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0725.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0726.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0726.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10/plFanuc-0726.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Oct 3 14:23:39 CDT 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e04168 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 11 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 716 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 717 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 718 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 719 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 720 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 721 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 722 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 723 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 724 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 725 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 726 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Oct 3 14:23:59 CDT 2001 Begin running plateEnder dr2001.10 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Oct 3 14:24:40 CDT 2001 ALL DONE PS: Read file for stderr output of this job.