Sender: LSF System Subject: Job 43427: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Apr 17 18:00:12 2002 Results reported at Wed Apr 17 18:02:50 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v13_34 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.04.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 139.92 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Apr 17 18:00:14 CDT 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Apr 17 18:00:17 CDT 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_17/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v13_34/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_9/OSF1/bin:/sdss/ups/prd/sdssmath/v5_6/OSF1/bin:/sdss/ups/prd/astrotools/v5_8/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed Apr 17 18:00:17 CDT 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_8/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_9/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v13_34/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_17/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_9/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_2/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_6/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a --------------------------------------------------------------- Wed Apr 17 18:00:17 CDT 2002 Begin running plate --------------------------------------------------------------- Wed Apr 17 18:00:17 CDT 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e61368 makePlates : beginning loop over plObs chain; makePlates : making 10 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0762.par makePlates : plateInfo struct for plate 981 : (h2).mjd 52435 (h2).raCen 310.1132 (h2).decCen 0.006811826 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 310.113 0.007 310.113 1.507 plMakePlateFromTile : mjd of obs : 52435.778809 Observed HA/dec of plate center, fiducial point (deg) : -25.002 0.025 -25.002 1.524 The rotation angle of the fid. point is 33.290618 plMakePlateFromTile : beginning loop over 940 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0761.par makePlates : plateInfo struct for plate 982 : (h2).mjd 52435 (h2).raCen 311.8013 (h2).decCen 0.005181892 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 311.801 0.005 311.801 1.505 plMakePlateFromTile : mjd of obs : 52435.780714 Observed HA/dec of plate center, fiducial point (deg) : -26.002 0.024 -26.002 1.523 The rotation angle of the fid. point is 34.258996 plMakePlateFromTile : beginning loop over 1088 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0760.par makePlates : plateInfo struct for plate 983 : (h2).mjd 52435 (h2).raCen 313.4135 (h2).decCen 0.03045941 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 313.413 0.030 313.413 1.530 plMakePlateFromTile : mjd of obs : 52435.779637 Observed HA/dec of plate center, fiducial point (deg) : -28.002 0.049 -28.002 1.549 The rotation angle of the fid. point is 36.125219 plMakePlateFromTile : beginning loop over 1167 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0759.par makePlates : plateInfo struct for plate 984 : (h2).mjd 52435 (h2).raCen 314.931 (h2).decCen -0.006412425 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 314.931 -0.006 314.931 1.494 plMakePlateFromTile : mjd of obs : 52435.781070 Observed HA/dec of plate center, fiducial point (deg) : -29.002 0.013 -29.002 1.512 The rotation angle of the fid. point is 36.982833 plMakePlateFromTile : beginning loop over 1231 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0758.par makePlates : plateInfo struct for plate 985 : (h2).mjd 52435 (h2).raCen 316.7707 (h2).decCen -0.07187875 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 316.771 -0.072 316.771 1.428 plMakePlateFromTile : mjd of obs : 52435.780623 Observed HA/dec of plate center, fiducial point (deg) : -31.002 -0.052 -31.002 1.447 The rotation angle of the fid. point is 38.619726 plMakePlateFromTile : beginning loop over 1292 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0757.par makePlates : plateInfo struct for plate 986 : (h2).mjd 52435 (h2).raCen 318.6458 (h2).decCen 0.008482357 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 318.646 0.008 318.646 1.508 plMakePlateFromTile : mjd of obs : 52435.821842 Observed HA/dec of plate center, fiducial point (deg) : -18.002 0.027 -18.002 1.527 The rotation angle of the fid. point is 25.649122 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0756.par makePlates : plateInfo struct for plate 987 : (h2).mjd 52435 (h2).raCen 320.5509 (h2).decCen -0.01558691 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 320.551 -0.016 320.551 1.484 plMakePlateFromTile : mjd of obs : 52435.821577 Observed HA/dec of plate center, fiducial point (deg) : -20.002 0.004 -20.002 1.503 The rotation angle of the fid. point is 27.974899 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0755.par makePlates : plateInfo struct for plate 988 : (h2).mjd 52435 (h2).raCen 322.4027 (h2).decCen 0.105343 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 322.403 0.105 322.403 1.605 plMakePlateFromTile : mjd of obs : 52435.821164 Observed HA/dec of plate center, fiducial point (deg) : -22.002 0.125 -22.002 1.624 The rotation angle of the fid. point is 30.265579 plMakePlateFromTile : beginning loop over 1278 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0754.par makePlates : plateInfo struct for plate 989 : (h2).mjd 52435 (h2).raCen 324.02 (h2).decCen -0.025976 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 324.020 -0.026 324.020 1.474 plMakePlateFromTile : mjd of obs : 52435.820101 Observed HA/dec of plate center, fiducial point (deg) : -24.002 -0.006 -24.002 1.493 The rotation angle of the fid. point is 32.273659 plMakePlateFromTile : beginning loop over 1326 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk42/complete//plPlugMapT-0753.par makePlates : plateInfo struct for plate 990 : (h2).mjd 52435 (h2).raCen 325.8144 (h2).decCen -0.04689807 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 325.814 -0.047 325.814 1.453 plMakePlateFromTile : mjd of obs : 52435.822301 Observed HA/dec of plate center, fiducial point (deg) : -25.002 -0.026 -25.002 1.473 The rotation angle of the fid. point is 33.259689 plMakePlateFromTile : beginning loop over 1363 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Apr 17 18:00:42 CDT 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 10 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0981.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 52 2 19 25 3 14 14 4 13 8 5 2 10 6 5 14 7 10 24 8 6 42 9 6 24 10 32 33 11 25 38 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 60 209 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 50 249 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 43 357 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 51 307 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 43 290 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 56 125 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 43 31 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 54 24 plFiberPlate : 15 possible sky positions to use as objects from a possible 130. plFiberPlate : 11 possible sky positions to use as objects from a possible 129. plFiberPlate : 6 possible sky positions to use as objects from a possible 128. plFiberPlate : 5 possible sky positions to use as objects from a possible 127. plFiberPlate : 8 possible sky positions to use as objects from a possible 126. plFiberPlate : 15 possible sky positions to use as objects from a possible 125. plFiberPlate : 12 possible sky positions to use as objects from a possible 124. plFiberPlate : 6 possible sky positions to use as objects from a possible 123. plFiberPlate : 4 possible sky positions to use as objects from a possible 122. plFiberPlate : 2 possible sky positions to use as objects from a possible 121. plFiberPlate : 1 possible sky positions to use as objects from a possible 120. plFiberPlate : 0 possible sky positions to use as objects from a possible 119. plFiberPlate: No sky found for bundle at -24.723 -88.407, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 119. plFiberPlate : 5 possible sky positions to use as objects from a possible 118. plFiberPlate : 1 possible sky positions to use as objects from a possible 117. plFiberPlate : 11 possible sky positions to use as objects from a possible 116. plFiberPlate : 15 possible sky positions to use as objects from a possible 115. plFiberPlate : 10 possible sky positions to use as objects from a possible 114. plFiberPlate : 7 possible sky positions to use as objects from a possible 113. plFiberPlate : 4 possible sky positions to use as objects from a possible 112. plFiberPlate : 4 possible sky positions to use as objects from a possible 111. plFiberPlate : 2 possible sky positions to use as objects from a possible 110. plFiberPlate : 6 possible sky positions to use as objects from a possible 109. plFiberPlate : 4 possible sky positions to use as objects from a possible 108. plFiberPlate : 9 possible sky positions to use as objects from a possible 107. plFiberPlate : 7 possible sky positions to use as objects from a possible 106. plFiberPlate : 6 possible sky positions to use as objects from a possible 105. plFiberPlate : 4 possible sky positions to use as objects from a possible 104. plFiberPlate : 3 possible sky positions to use as objects from a possible 103. plFiberPlate : 2 possible sky positions to use as objects from a possible 102. plFiberPlate : 1 possible sky positions to use as objects from a possible 101. plFiberPlate : 0 possible sky positions to use as objects from a possible 100. plFiberPlate: No sky found for bundle at 66.603 216.034, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 100. plFiberPlate: No sky found for bundle at 66.603 216.034, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 100. plFiberPlate: No sky found for bundle at 66.603 216.034, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 100. plFiberPlate: No sky found for bundle at 66.603 216.034, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 100. plFiberPlate : 3 possible sky positions to use as objects from a possible 99. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0981.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0981.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0982.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 44 2 22 29 3 21 28 4 21 43 5 9 41 6 9 30 7 10 39 8 5 48 9 5 44 10 40 56 11 28 37 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 57 81 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 69 311 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 61 343 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 72 72 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 56 125 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 54 24 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 62 193 plFiberPlate : 50 possible sky positions to use as objects from a possible 211. plFiberPlate : 24 possible sky positions to use as objects from a possible 210. plFiberPlate : 12 possible sky positions to use as objects from a possible 209. plFiberPlate : 5 possible sky positions to use as objects from a possible 208. plFiberPlate : 8 possible sky positions to use as objects from a possible 207. plFiberPlate : 10 possible sky positions to use as objects from a possible 206. plFiberPlate : 16 possible sky positions to use as objects from a possible 205. plFiberPlate : 33 possible sky positions to use as objects from a possible 204. plFiberPlate : 31 possible sky positions to use as objects from a possible 203. plFiberPlate : 17 possible sky positions to use as objects from a possible 202. plFiberPlate : 7 possible sky positions to use as objects from a possible 201. plFiberPlate : 2 possible sky positions to use as objects from a possible 200. plFiberPlate : 9 possible sky positions to use as objects from a possible 199. plFiberPlate : 7 possible sky positions to use as objects from a possible 198. plFiberPlate : 6 possible sky positions to use as objects from a possible 197. plFiberPlate : 5 possible sky positions to use as objects from a possible 196. plFiberPlate : 20 possible sky positions to use as objects from a possible 195. plFiberPlate : 15 possible sky positions to use as objects from a possible 194. plFiberPlate : 5 possible sky positions to use as objects from a possible 193. plFiberPlate : 0 possible sky positions to use as objects from a possible 192. plFiberPlate: No sky found for bundle at -18.755 59.045, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 192. plFiberPlate: No sky found for bundle at -18.755 59.045, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 192. plFiberPlate : 1 possible sky positions to use as objects from a possible 191. plFiberPlate : 7 possible sky positions to use as objects from a possible 190. plFiberPlate : 10 possible sky positions to use as objects from a possible 189. plFiberPlate : 3 possible sky positions to use as objects from a possible 188. plFiberPlate : 5 possible sky positions to use as objects from a possible 187. plFiberPlate : 22 possible sky positions to use as objects from a possible 186. plFiberPlate : 16 possible sky positions to use as objects from a possible 185. plFiberPlate : 9 possible sky positions to use as objects from a possible 184. plFiberPlate : 7 possible sky positions to use as objects from a possible 183. plFiberPlate : 11 possible sky positions to use as objects from a possible 182. plFiberPlate : 7 possible sky positions to use as objects from a possible 181. plFiberPlate : 11 possible sky positions to use as objects from a possible 180. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0981.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0982.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0982.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0983.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 65 2 23 41 3 14 36 4 19 43 5 6 51 6 9 36 7 6 30 8 3 62 9 5 54 10 24 71 11 23 57 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 75 253 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 68 145 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 80 150 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 77 91 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 81 290 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 62 193 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 53 possible sky positions to use as objects from a possible 276. plFiberPlate : 36 possible sky positions to use as objects from a possible 275. plFiberPlate : 21 possible sky positions to use as objects from a possible 274. plFiberPlate : 9 possible sky positions to use as objects from a possible 273. plFiberPlate : 12 possible sky positions to use as objects from a possible 272. plFiberPlate : 19 possible sky positions to use as objects from a possible 271. plFiberPlate : 37 possible sky positions to use as objects from a possible 270. plFiberPlate : 40 possible sky positions to use as objects from a possible 269. plFiberPlate : 33 possible sky positions to use as objects from a possible 268. plFiberPlate : 23 possible sky positions to use as objects from a possible 267. plFiberPlate : 11 possible sky positions to use as objects from a possible 266. plFiberPlate : 6 possible sky positions to use as objects from a possible 265. plFiberPlate : 6 possible sky positions to use as objects from a possible 264. plFiberPlate : 10 possible sky positions to use as objects from a possible 263. plFiberPlate : 23 possible sky positions to use as objects from a possible 262. plFiberPlate : 10 possible sky positions to use as objects from a possible 261. plFiberPlate : 33 possible sky positions to use as objects from a possible 260. plFiberPlate : 22 possible sky positions to use as objects from a possible 259. plFiberPlate : 12 possible sky positions to use as objects from a possible 258. plFiberPlate : 4 possible sky positions to use as objects from a possible 257. plFiberPlate : 11 possible sky positions to use as objects from a possible 256. plFiberPlate : 6 possible sky positions to use as objects from a possible 255. plFiberPlate : 17 possible sky positions to use as objects from a possible 254. plFiberPlate : 5 possible sky positions to use as objects from a possible 253. plFiberPlate : 9 possible sky positions to use as objects from a possible 252. plFiberPlate : 23 possible sky positions to use as objects from a possible 251. plFiberPlate : 14 possible sky positions to use as objects from a possible 250. plFiberPlate : 12 possible sky positions to use as objects from a possible 249. plFiberPlate : 2 possible sky positions to use as objects from a possible 248. plFiberPlate : 3 possible sky positions to use as objects from a possible 247. plFiberPlate : 4 possible sky positions to use as objects from a possible 246. plFiberPlate : 13 possible sky positions to use as objects from a possible 245. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0982.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0983.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0983.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0984.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 95 2 16 62 3 25 52 4 25 54 5 7 58 6 12 31 7 11 37 8 7 63 9 7 42 10 34 99 11 22 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 97 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 82 141 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 97 164 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 100 81 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 82 203 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 83 214 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 69 possible sky positions to use as objects from a possible 332. plFiberPlate : 48 possible sky positions to use as objects from a possible 331. plFiberPlate : 27 possible sky positions to use as objects from a possible 330. plFiberPlate : 16 possible sky positions to use as objects from a possible 329. plFiberPlate : 20 possible sky positions to use as objects from a possible 328. plFiberPlate : 21 possible sky positions to use as objects from a possible 327. plFiberPlate : 41 possible sky positions to use as objects from a possible 326. plFiberPlate : 25 possible sky positions to use as objects from a possible 325. plFiberPlate : 28 possible sky positions to use as objects from a possible 324. plFiberPlate : 24 possible sky positions to use as objects from a possible 323. plFiberPlate : 16 possible sky positions to use as objects from a possible 322. plFiberPlate : 8 possible sky positions to use as objects from a possible 321. plFiberPlate : 8 possible sky positions to use as objects from a possible 320. plFiberPlate : 13 possible sky positions to use as objects from a possible 319. plFiberPlate : 16 possible sky positions to use as objects from a possible 318. plFiberPlate : 12 possible sky positions to use as objects from a possible 317. plFiberPlate : 31 possible sky positions to use as objects from a possible 316. plFiberPlate : 24 possible sky positions to use as objects from a possible 315. plFiberPlate : 16 possible sky positions to use as objects from a possible 314. plFiberPlate : 8 possible sky positions to use as objects from a possible 313. plFiberPlate : 6 possible sky positions to use as objects from a possible 312. plFiberPlate : 3 possible sky positions to use as objects from a possible 311. plFiberPlate : 5 possible sky positions to use as objects from a possible 310. plFiberPlate : 7 possible sky positions to use as objects from a possible 309. plFiberPlate : 17 possible sky positions to use as objects from a possible 308. plFiberPlate : 12 possible sky positions to use as objects from a possible 307. plFiberPlate : 12 possible sky positions to use as objects from a possible 306. plFiberPlate : 3 possible sky positions to use as objects from a possible 305. plFiberPlate : 0 possible sky positions to use as objects from a possible 304. plFiberPlate: No sky found for bundle at -3.570 219.427, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 304. plFiberPlate: No sky found for bundle at -3.570 219.427, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 304. plFiberPlate : 8 possible sky positions to use as objects from a possible 303. plFiberPlate : 6 possible sky positions to use as objects from a possible 302. plFiberPlate : 16 possible sky positions to use as objects from a possible 301. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0983.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0984.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0984.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0985.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 90 2 19 60 3 11 55 4 18 87 5 4 78 6 9 60 7 6 59 8 2 77 9 7 86 10 25 104 11 23 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 98 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 87 89 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 101 144 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 109 8 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : 84 possible sky positions to use as objects from a possible 404. plFiberPlate : 43 possible sky positions to use as objects from a possible 403. plFiberPlate : 15 possible sky positions to use as objects from a possible 402. plFiberPlate : 5 possible sky positions to use as objects from a possible 401. plFiberPlate : 15 possible sky positions to use as objects from a possible 400. plFiberPlate : 30 possible sky positions to use as objects from a possible 399. plFiberPlate : 38 possible sky positions to use as objects from a possible 398. plFiberPlate : 61 possible sky positions to use as objects from a possible 397. plFiberPlate : 39 possible sky positions to use as objects from a possible 396. plFiberPlate : 23 possible sky positions to use as objects from a possible 395. plFiberPlate : 10 possible sky positions to use as objects from a possible 394. plFiberPlate : 9 possible sky positions to use as objects from a possible 393. plFiberPlate : 1 possible sky positions to use as objects from a possible 392. plFiberPlate : 9 possible sky positions to use as objects from a possible 391. plFiberPlate : 9 possible sky positions to use as objects from a possible 390. plFiberPlate : 16 possible sky positions to use as objects from a possible 389. plFiberPlate : 47 possible sky positions to use as objects from a possible 388. plFiberPlate : 56 possible sky positions to use as objects from a possible 387. plFiberPlate : 40 possible sky positions to use as objects from a possible 386. plFiberPlate : 28 possible sky positions to use as objects from a possible 385. plFiberPlate : 7 possible sky positions to use as objects from a possible 384. plFiberPlate : 11 possible sky positions to use as objects from a possible 383. plFiberPlate : 13 possible sky positions to use as objects from a possible 382. plFiberPlate : 10 possible sky positions to use as objects from a possible 381. plFiberPlate : 11 possible sky positions to use as objects from a possible 380. plFiberPlate : 24 possible sky positions to use as objects from a possible 379. plFiberPlate : 14 possible sky positions to use as objects from a possible 378. plFiberPlate : 14 possible sky positions to use as objects from a possible 377. plFiberPlate : 10 possible sky positions to use as objects from a possible 376. plFiberPlate : 6 possible sky positions to use as objects from a possible 375. plFiberPlate : 12 possible sky positions to use as objects from a possible 374. plFiberPlate : 9 possible sky positions to use as objects from a possible 373. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0984.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0985.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0985.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0986.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 92 2 20 56 3 18 54 4 21 77 5 3 70 6 5 55 7 5 55 8 3 79 9 5 76 10 31 103 11 32 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 114 188 plFiberPlate : adding spectro-photo std with objId = 2659 0 6 112 30 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 108 116 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : 98 possible sky positions to use as objects from a possible 404. plFiberPlate : 42 possible sky positions to use as objects from a possible 403. plFiberPlate : 29 possible sky positions to use as objects from a possible 402. plFiberPlate : 9 possible sky positions to use as objects from a possible 401. plFiberPlate : 26 possible sky positions to use as objects from a possible 400. plFiberPlate : 18 possible sky positions to use as objects from a possible 399. plFiberPlate : 42 possible sky positions to use as objects from a possible 398. plFiberPlate : 56 possible sky positions to use as objects from a possible 397. plFiberPlate : 59 possible sky positions to use as objects from a possible 396. plFiberPlate : 34 possible sky positions to use as objects from a possible 395. plFiberPlate : 18 possible sky positions to use as objects from a possible 394. plFiberPlate : 16 possible sky positions to use as objects from a possible 393. plFiberPlate : 9 possible sky positions to use as objects from a possible 392. plFiberPlate : 10 possible sky positions to use as objects from a possible 391. plFiberPlate : 17 possible sky positions to use as objects from a possible 390. plFiberPlate : 29 possible sky positions to use as objects from a possible 389. plFiberPlate : 33 possible sky positions to use as objects from a possible 388. plFiberPlate : 33 possible sky positions to use as objects from a possible 387. plFiberPlate : 18 possible sky positions to use as objects from a possible 386. plFiberPlate : 12 possible sky positions to use as objects from a possible 385. plFiberPlate : 8 possible sky positions to use as objects from a possible 384. plFiberPlate : 9 possible sky positions to use as objects from a possible 383. plFiberPlate : 9 possible sky positions to use as objects from a possible 382. plFiberPlate : 19 possible sky positions to use as objects from a possible 381. plFiberPlate : 13 possible sky positions to use as objects from a possible 380. plFiberPlate : 29 possible sky positions to use as objects from a possible 379. plFiberPlate : 19 possible sky positions to use as objects from a possible 378. plFiberPlate : 11 possible sky positions to use as objects from a possible 377. plFiberPlate : 14 possible sky positions to use as objects from a possible 376. plFiberPlate : 4 possible sky positions to use as objects from a possible 375. plFiberPlate : 8 possible sky positions to use as objects from a possible 374. plFiberPlate : 10 possible sky positions to use as objects from a possible 373. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0985.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0986.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0986.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0987.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 106 2 24 59 3 20 57 4 27 85 5 4 100 6 6 56 7 8 43 8 6 87 9 7 79 10 41 125 11 30 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 19 28 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 23 149 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 113 161 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 112 134 plFiberPlate : adding spectro-photo std with objId = 2659 0 5 128 35 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 112 122 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 114 239 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : 95 possible sky positions to use as objects from a possible 453. plFiberPlate : 71 possible sky positions to use as objects from a possible 452. plFiberPlate : 44 possible sky positions to use as objects from a possible 451. plFiberPlate : 22 possible sky positions to use as objects from a possible 450. plFiberPlate : 24 possible sky positions to use as objects from a possible 449. plFiberPlate : 26 possible sky positions to use as objects from a possible 448. plFiberPlate : 56 possible sky positions to use as objects from a possible 447. plFiberPlate : 83 possible sky positions to use as objects from a possible 446. plFiberPlate : 65 possible sky positions to use as objects from a possible 445. plFiberPlate : 45 possible sky positions to use as objects from a possible 444. plFiberPlate : 31 possible sky positions to use as objects from a possible 443. plFiberPlate : 15 possible sky positions to use as objects from a possible 442. plFiberPlate : 9 possible sky positions to use as objects from a possible 441. plFiberPlate : 16 possible sky positions to use as objects from a possible 440. plFiberPlate : 22 possible sky positions to use as objects from a possible 439. plFiberPlate : 32 possible sky positions to use as objects from a possible 438. plFiberPlate : 47 possible sky positions to use as objects from a possible 437. plFiberPlate : 21 possible sky positions to use as objects from a possible 436. plFiberPlate : 18 possible sky positions to use as objects from a possible 435. plFiberPlate : 14 possible sky positions to use as objects from a possible 434. plFiberPlate : 9 possible sky positions to use as objects from a possible 433. plFiberPlate : 3 possible sky positions to use as objects from a possible 432. plFiberPlate : 12 possible sky positions to use as objects from a possible 431. plFiberPlate : 8 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 25 possible sky positions to use as objects from a possible 428. plFiberPlate : 18 possible sky positions to use as objects from a possible 427. plFiberPlate : 9 possible sky positions to use as objects from a possible 426. plFiberPlate : 4 possible sky positions to use as objects from a possible 425. plFiberPlate : 1 possible sky positions to use as objects from a possible 424. plFiberPlate : 1 possible sky positions to use as objects from a possible 423. plFiberPlate : 7 possible sky positions to use as objects from a possible 422. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0986.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0987.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0987.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0988.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 104 2 19 78 3 15 87 4 21 96 5 11 94 6 12 44 7 8 48 8 8 77 9 7 75 10 26 124 11 21 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 130 157 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 123 71 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 26 134 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 127 55 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 117 possible sky positions to use as objects from a possible 448. plFiberPlate : 51 possible sky positions to use as objects from a possible 447. plFiberPlate : 25 possible sky positions to use as objects from a possible 446. plFiberPlate : 7 possible sky positions to use as objects from a possible 445. plFiberPlate : 13 possible sky positions to use as objects from a possible 444. plFiberPlate : 25 possible sky positions to use as objects from a possible 443. plFiberPlate : 45 possible sky positions to use as objects from a possible 442. plFiberPlate : 60 possible sky positions to use as objects from a possible 441. plFiberPlate : 25 possible sky positions to use as objects from a possible 440. plFiberPlate : 7 possible sky positions to use as objects from a possible 439. plFiberPlate : 3 possible sky positions to use as objects from a possible 438. plFiberPlate : 1 possible sky positions to use as objects from a possible 437. plFiberPlate : 10 possible sky positions to use as objects from a possible 436. plFiberPlate : 10 possible sky positions to use as objects from a possible 435. plFiberPlate : 19 possible sky positions to use as objects from a possible 434. plFiberPlate : 13 possible sky positions to use as objects from a possible 433. plFiberPlate : 65 possible sky positions to use as objects from a possible 432. plFiberPlate : 40 possible sky positions to use as objects from a possible 431. plFiberPlate : 13 possible sky positions to use as objects from a possible 430. plFiberPlate : 10 possible sky positions to use as objects from a possible 429. plFiberPlate : 5 possible sky positions to use as objects from a possible 428. plFiberPlate : 8 possible sky positions to use as objects from a possible 427. plFiberPlate : 19 possible sky positions to use as objects from a possible 426. plFiberPlate : 18 possible sky positions to use as objects from a possible 425. plFiberPlate : 7 possible sky positions to use as objects from a possible 424. plFiberPlate : 20 possible sky positions to use as objects from a possible 423. plFiberPlate : 14 possible sky positions to use as objects from a possible 422. plFiberPlate : 10 possible sky positions to use as objects from a possible 421. plFiberPlate : 12 possible sky positions to use as objects from a possible 420. plFiberPlate : 3 possible sky positions to use as objects from a possible 419. plFiberPlate : 14 possible sky positions to use as objects from a possible 418. plFiberPlate : 11 possible sky positions to use as objects from a possible 417. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0987.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0988.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0988.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0989.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 111 2 18 77 3 15 68 4 23 93 5 12 99 6 10 63 7 9 61 8 6 94 9 7 74 10 26 126 11 18 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 137 177 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 45 94 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 45 102 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 148 76 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 109 possible sky positions to use as objects from a possible 486. plFiberPlate : 63 possible sky positions to use as objects from a possible 485. plFiberPlate : 33 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 50 possible sky positions to use as objects from a possible 482. plFiberPlate : 23 possible sky positions to use as objects from a possible 481. plFiberPlate : 54 possible sky positions to use as objects from a possible 480. plFiberPlate : 52 possible sky positions to use as objects from a possible 479. plFiberPlate : 57 possible sky positions to use as objects from a possible 478. plFiberPlate : 41 possible sky positions to use as objects from a possible 477. plFiberPlate : 25 possible sky positions to use as objects from a possible 476. plFiberPlate : 5 possible sky positions to use as objects from a possible 475. plFiberPlate : 5 possible sky positions to use as objects from a possible 474. plFiberPlate : 12 possible sky positions to use as objects from a possible 473. plFiberPlate : 24 possible sky positions to use as objects from a possible 472. plFiberPlate : 31 possible sky positions to use as objects from a possible 471. plFiberPlate : 49 possible sky positions to use as objects from a possible 470. plFiberPlate : 21 possible sky positions to use as objects from a possible 469. plFiberPlate : 10 possible sky positions to use as objects from a possible 468. plFiberPlate : 4 possible sky positions to use as objects from a possible 467. plFiberPlate : 4 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 1 possible sky positions to use as objects from a possible 464. plFiberPlate : 5 possible sky positions to use as objects from a possible 463. plFiberPlate : 34 possible sky positions to use as objects from a possible 462. plFiberPlate : 29 possible sky positions to use as objects from a possible 461. plFiberPlate : 16 possible sky positions to use as objects from a possible 460. plFiberPlate : 7 possible sky positions to use as objects from a possible 459. plFiberPlate : 3 possible sky positions to use as objects from a possible 458. plFiberPlate : 11 possible sky positions to use as objects from a possible 457. plFiberPlate : 2 possible sky positions to use as objects from a possible 456. plFiberPlate : 23 possible sky positions to use as objects from a possible 455. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0988.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0989.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0989.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.3/plPlugMapP-0990.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 110 2 18 67 3 14 66 4 15 99 5 5 111 6 8 77 7 11 62 8 24 101 9 4 97 10 30 136 11 25 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 157 146 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 51 103 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 151 129 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 154 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 148 76 plFiberPlate : adding spectro-photo std with objId = 2662 0 3 54 122 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 54 27 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : 104 possible sky positions to use as objects from a possible 524. plFiberPlate : 78 possible sky positions to use as objects from a possible 523. plFiberPlate : 53 possible sky positions to use as objects from a possible 522. plFiberPlate : 38 possible sky positions to use as objects from a possible 521. plFiberPlate : 24 possible sky positions to use as objects from a possible 520. plFiberPlate : 29 possible sky positions to use as objects from a possible 519. plFiberPlate : 30 possible sky positions to use as objects from a possible 518. plFiberPlate : 87 possible sky positions to use as objects from a possible 517. plFiberPlate : 67 possible sky positions to use as objects from a possible 516. plFiberPlate : 53 possible sky positions to use as objects from a possible 515. plFiberPlate : 33 possible sky positions to use as objects from a possible 514. plFiberPlate : 24 possible sky positions to use as objects from a possible 513. plFiberPlate : 20 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 33 possible sky positions to use as objects from a possible 509. plFiberPlate : 52 possible sky positions to use as objects from a possible 508. plFiberPlate : 44 possible sky positions to use as objects from a possible 507. plFiberPlate : 37 possible sky positions to use as objects from a possible 506. plFiberPlate : 23 possible sky positions to use as objects from a possible 505. plFiberPlate : 16 possible sky positions to use as objects from a possible 504. plFiberPlate : 7 possible sky positions to use as objects from a possible 503. plFiberPlate : 5 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 5 possible sky positions to use as objects from a possible 500. plFiberPlate : 50 possible sky positions to use as objects from a possible 499. plFiberPlate : 21 possible sky positions to use as objects from a possible 498. plFiberPlate : 14 possible sky positions to use as objects from a possible 497. plFiberPlate : 12 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0989.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0990.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.3/plOverlay-0990.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Apr 17 18:01:12 CDT 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 10 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0981.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0981.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0981.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0982.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2382,6.1150) and (-11.56,5.10) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0982.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0982.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0983.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0983.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0983.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0984.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3713,-2.9496) and (-12.58,-2.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0984.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0984.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0985.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0985.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0985.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0986.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0986.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0986.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0987.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2142,3.5751) and (-12.53,1.88) plMakeFanucCodes : fixed path between (11.3617,-5.7972) and (11.96,-4.04) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0987.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0987.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0988.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0988.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0988.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0989.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0989.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0989.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0990.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0990.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7435,10.4888) and (-12.22,-2.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.3/plFanuc-0990.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Apr 17 18:01:44 CDT 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e61368 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 10 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 981 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 982 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 983 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 984 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 985 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 986 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 987 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 988 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 989 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 990 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Apr 17 18:01:59 CDT 2002 Begin running plateEnder dr2002.04.3 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Apr 17 18:02:48 CDT 2002 ALL DONE PS: Read file for stderr output of this job.