Sender: LSF System Subject: Job 102782: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Sep 30 11:21:23 2003 Results reported at Tue Sep 30 11:23:28 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_76 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.10.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 112.78 sec. Max Memory : 11 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Tue Sep 30 11:21:23 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Sep 30 11:21:25 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_2/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v2_20/Linux:/fnal/ups/prd/ups/v4_6Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_0/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_0/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_76/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Tue Sep 30 11:21:25 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_76/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_0/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_yKz83T --------------------------------------------------------------- --------------------------------------------------------------- Tue Sep 30 11:21:25 CDT 2003 Begin running plate --------------------------------------------------------------- Tue Sep 30 11:21:25 CDT 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8b6f7cc makePlates : beginning loop over plObs chain; makePlates : making 12 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1142.par makePlates : plateInfo struct for plate 1617 : (h4).mjd 53035 (h4).raCen 169.6605 (h4).decCen 7.26778 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.661 7.268 169.661 8.768 plMakePlateFromTile : mjd of obs : 53035.762695 Observed HA/dec of plate center, fiducial point (deg) : -19.002 7.254 -19.003 8.753 The rotation angle of the fid. point is 32.090308 plMakePlateFromTile : beginning loop over 1359 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1143.par makePlates : plateInfo struct for plate 1618 : (h4).mjd 53035 (h4).raCen 171.758 (h4).decCen 7.297942 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.758 7.298 171.758 8.798 plMakePlateFromTile : mjd of obs : 53035.762963 Observed HA/dec of plate center, fiducial point (deg) : -21.002 7.284 -21.003 8.783 The rotation angle of the fid. point is 34.563291 plMakePlateFromTile : beginning loop over 1355 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1144.par makePlates : plateInfo struct for plate 1619 : (h4).mjd 53035 (h4).raCen 173.7336 (h4).decCen 7.404002 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.734 7.404 173.734 8.904 plMakePlateFromTile : mjd of obs : 53035.804458 Observed HA/dec of plate center, fiducial point (deg) : -8.002 7.389 -8.003 8.888 The rotation angle of the fid. point is 15.237676 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1145.par makePlates : plateInfo struct for plate 1620 : (h4).mjd 53035 (h4).raCen 175.6746 (h4).decCen 7.331535 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.675 7.332 175.675 8.832 plMakePlateFromTile : mjd of obs : 53035.843086 Observed HA/dec of plate center, fiducial point (deg) : 3.998 7.316 3.997 8.816 The rotation angle of the fid. point is -7.755055 plMakePlateFromTile : beginning loop over 1342 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1146.par makePlates : plateInfo struct for plate 1621 : (h4).mjd 53035 (h4).raCen 176.9661 (h4).decCen 7.413211 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.966 7.413 176.966 8.913 plMakePlateFromTile : mjd of obs : 53035.843893 Observed HA/dec of plate center, fiducial point (deg) : 2.998 7.398 2.998 8.897 The rotation angle of the fid. point is -5.851161 plMakePlateFromTile : beginning loop over 1340 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1147.par makePlates : plateInfo struct for plate 1622 : (h4).mjd 53035 (h4).raCen 178.9395 (h4).decCen 7.510989 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.940 7.511 178.940 9.011 plMakePlateFromTile : mjd of obs : 53035.843817 Observed HA/dec of plate center, fiducial point (deg) : 0.998 7.495 0.998 8.995 The rotation angle of the fid. point is -1.960203 plMakePlateFromTile : beginning loop over 1342 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1148.par makePlates : plateInfo struct for plate 1623 : (h4).mjd 53035 (h4).raCen 180.9293 (h4).decCen 7.440396 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.929 7.440 180.929 8.940 plMakePlateFromTile : mjd of obs : 53035.846557 Observed HA/dec of plate center, fiducial point (deg) : -0.002 7.425 -0.002 8.924 The rotation angle of the fid. point is 0.006629 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1149.par makePlates : plateInfo struct for plate 1624 : (h4).mjd 53035 (h4).raCen 182.9873 (h4).decCen 7.510831 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.987 7.511 182.987 9.011 plMakePlateFromTile : mjd of obs : 53035.846716 Observed HA/dec of plate center, fiducial point (deg) : -2.002 7.495 -2.002 8.995 The rotation angle of the fid. point is 3.935323 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1150.par makePlates : plateInfo struct for plate 1625 : (h4).mjd 53035 (h4).raCen 184.8078 (h4).decCen 7.527328 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.808 7.527 184.808 9.027 plMakePlateFromTile : mjd of obs : 53035.926576 Observed HA/dec of plate center, fiducial point (deg) : 24.998 7.513 24.998 9.012 The rotation angle of the fid. point is -39.105235 plMakePlateFromTile : beginning loop over 1335 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1151.par makePlates : plateInfo struct for plate 1626 : (h4).mjd 53035 (h4).raCen 186.2332 (h4).decCen 7.517494 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.233 7.517 186.233 9.017 plMakePlateFromTile : mjd of obs : 53035.924981 Observed HA/dec of plate center, fiducial point (deg) : 22.998 7.503 22.998 9.002 The rotation angle of the fid. point is -37.014158 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1152.par makePlates : plateInfo struct for plate 1627 : (h4).mjd 53035 (h4).raCen 187.7592 (h4).decCen 7.501217 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.759 7.501 187.759 9.001 plMakePlateFromTile : mjd of obs : 53035.926437 Observed HA/dec of plate center, fiducial point (deg) : 21.998 7.486 21.998 8.986 The rotation angle of the fid. point is -35.891605 plMakePlateFromTile : beginning loop over 1363 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk78/complete//plPlugMapT-1153.par makePlates : plateInfo struct for plate 1628 : (h4).mjd 53035 (h4).raCen 189.2764 (h4).decCen 7.511095 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.276 7.511 189.276 9.011 plMakePlateFromTile : mjd of obs : 53035.925097 Observed HA/dec of plate center, fiducial point (deg) : 19.998 7.496 19.998 8.995 The rotation angle of the fid. point is -33.545097 plMakePlateFromTile : beginning loop over 1366 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Sep 30 11:21:46 CDT 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 12 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1617.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 110 2 9 102 3 7 114 4 8 111 5 7 131 6 8 101 7 11 93 8 11 98 9 9 107 10 13 168 11 11 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 40 5 367 24 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 40 30 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 31 57 plFiberPlate : adding spectro-photo std with objId = 3015 40 4 369 57 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 35 93 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 33 43 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 40 75 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 38 6 plFiberPlate : 112 possible sky positions to use as objects from a possible 625. plFiberPlate : 79 possible sky positions to use as objects from a possible 624. plFiberPlate : 63 possible sky positions to use as objects from a possible 623. plFiberPlate : 44 possible sky positions to use as objects from a possible 622. plFiberPlate : 14 possible sky positions to use as objects from a possible 621. plFiberPlate : 23 possible sky positions to use as objects from a possible 620. plFiberPlate : 42 possible sky positions to use as objects from a possible 619. plFiberPlate : 43 possible sky positions to use as objects from a possible 618. plFiberPlate : 23 possible sky positions to use as objects from a possible 617. plFiberPlate : 15 possible sky positions to use as objects from a possible 616. plFiberPlate : 25 possible sky positions to use as objects from a possible 615. plFiberPlate : 14 possible sky positions to use as objects from a possible 614. plFiberPlate : 26 possible sky positions to use as objects from a possible 613. plFiberPlate : 10 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : 3 possible sky positions to use as objects from a possible 610. plFiberPlate : 79 possible sky positions to use as objects from a possible 609. plFiberPlate : 43 possible sky positions to use as objects from a possible 608. plFiberPlate : 25 possible sky positions to use as objects from a possible 607. plFiberPlate : 10 possible sky positions to use as objects from a possible 606. plFiberPlate : 19 possible sky positions to use as objects from a possible 605. plFiberPlate : 18 possible sky positions to use as objects from a possible 604. plFiberPlate : 5 possible sky positions to use as objects from a possible 603. plFiberPlate : 6 possible sky positions to use as objects from a possible 602. plFiberPlate : 5 possible sky positions to use as objects from a possible 601. plFiberPlate : 47 possible sky positions to use as objects from a possible 600. plFiberPlate : 53 possible sky positions to use as objects from a possible 599. plFiberPlate : 29 possible sky positions to use as objects from a possible 598. plFiberPlate : 12 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 21 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1617.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1617.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1618.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 115 2 13 97 3 5 98 4 9 129 5 12 128 6 7 84 7 8 84 8 6 102 9 12 99 10 16 158 11 9 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 40 1 387 37 plFiberPlate : adding spectro-photo std with objId = 3015 40 5 393 41 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 45 12 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 40 30 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 53 2 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 40 75 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 53 2 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 48 64 plFiberPlate : 142 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 39 possible sky positions to use as objects from a possible 612. plFiberPlate : 21 possible sky positions to use as objects from a possible 611. plFiberPlate : 22 possible sky positions to use as objects from a possible 610. plFiberPlate : 30 possible sky positions to use as objects from a possible 609. plFiberPlate : 22 possible sky positions to use as objects from a possible 608. plFiberPlate : 76 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 15 possible sky positions to use as objects from a possible 604. plFiberPlate : 8 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 66 possible sky positions to use as objects from a possible 598. plFiberPlate : 19 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 2 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 4 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 15 possible sky positions to use as objects from a possible 590. plFiberPlate : 31 possible sky positions to use as objects from a possible 589. plFiberPlate : 19 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 22 possible sky positions to use as objects from a possible 586. plFiberPlate : 11 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1617.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1618.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1618.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1619.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 107 2 10 95 3 8 84 4 6 118 5 11 127 6 9 96 7 10 81 8 12 105 9 11 95 10 12 138 11 7 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 40 1 395 84 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 54 53 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 53 2 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 63 58 plFiberPlate : adding spectro-photo std with objId = 3015 40 5 399 9 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 53 2 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 59 24 plFiberPlate : adding spectro-photo std with objId = 3015 40 2 394 57 plFiberPlate : 136 possible sky positions to use as objects from a possible 593. plFiberPlate : 69 possible sky positions to use as objects from a possible 592. plFiberPlate : 42 possible sky positions to use as objects from a possible 591. plFiberPlate : 29 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 34 possible sky positions to use as objects from a possible 588. plFiberPlate : 54 possible sky positions to use as objects from a possible 587. plFiberPlate : 94 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 3 possible sky positions to use as objects from a possible 582. plFiberPlate : 5 possible sky positions to use as objects from a possible 581. plFiberPlate : 5 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 12 possible sky positions to use as objects from a possible 578. plFiberPlate : 56 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 49 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 38 possible sky positions to use as objects from a possible 566. plFiberPlate : 16 possible sky positions to use as objects from a possible 565. plFiberPlate : 4 possible sky positions to use as objects from a possible 564. plFiberPlate : 9 possible sky positions to use as objects from a possible 563. plFiberPlate : 24 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1618.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1619.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1619.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1620.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 143 2 15 109 3 10 97 4 8 119 5 11 121 6 10 81 7 4 92 8 10 121 9 5 89 10 8 169 11 9 124 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 66 60 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 64 21 plFiberPlate : adding spectro-photo std with objId = 3015 40 3 415 93 plFiberPlate : adding spectro-photo std with objId = 3015 40 1 418 22 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 73 81 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 71 13 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 73 76 plFiberPlate : adding spectro-photo std with objId = 3015 40 6 413 75 plFiberPlate : 118 possible sky positions to use as objects from a possible 623. plFiberPlate : 81 possible sky positions to use as objects from a possible 622. plFiberPlate : 58 possible sky positions to use as objects from a possible 621. plFiberPlate : 26 possible sky positions to use as objects from a possible 620. plFiberPlate : 46 possible sky positions to use as objects from a possible 619. plFiberPlate : 58 possible sky positions to use as objects from a possible 618. plFiberPlate : 46 possible sky positions to use as objects from a possible 617. plFiberPlate : 56 possible sky positions to use as objects from a possible 616. plFiberPlate : 64 possible sky positions to use as objects from a possible 615. plFiberPlate : 32 possible sky positions to use as objects from a possible 614. plFiberPlate : 15 possible sky positions to use as objects from a possible 613. plFiberPlate : 10 possible sky positions to use as objects from a possible 612. plFiberPlate : 22 possible sky positions to use as objects from a possible 611. plFiberPlate : 25 possible sky positions to use as objects from a possible 610. plFiberPlate : 15 possible sky positions to use as objects from a possible 609. plFiberPlate : 12 possible sky positions to use as objects from a possible 608. plFiberPlate : 73 possible sky positions to use as objects from a possible 607. plFiberPlate : 17 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 3 possible sky positions to use as objects from a possible 603. plFiberPlate : 2 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 15 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 35 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 3 possible sky positions to use as objects from a possible 595. plFiberPlate : 1 possible sky positions to use as objects from a possible 594. plFiberPlate : 33 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1619.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1620.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1620.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1621.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 144 2 11 105 3 7 108 4 7 106 5 5 112 6 6 92 7 7 89 8 8 125 9 8 103 10 16 163 11 7 120 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 88 55 plFiberPlate : adding spectro-photo std with objId = 3015 40 5 417 61 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 83 52 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 73 76 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 84 67 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 88 109 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 90 61 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 81 45 plFiberPlate : 120 possible sky positions to use as objects from a possible 629. plFiberPlate : 69 possible sky positions to use as objects from a possible 628. plFiberPlate : 55 possible sky positions to use as objects from a possible 627. plFiberPlate : 35 possible sky positions to use as objects from a possible 626. plFiberPlate : 8 possible sky positions to use as objects from a possible 625. plFiberPlate : 14 possible sky positions to use as objects from a possible 624. plFiberPlate : 45 possible sky positions to use as objects from a possible 623. plFiberPlate : 72 possible sky positions to use as objects from a possible 622. plFiberPlate : 67 possible sky positions to use as objects from a possible 621. plFiberPlate : 63 possible sky positions to use as objects from a possible 620. plFiberPlate : 46 possible sky positions to use as objects from a possible 619. plFiberPlate : 43 possible sky positions to use as objects from a possible 618. plFiberPlate : 27 possible sky positions to use as objects from a possible 617. plFiberPlate : 10 possible sky positions to use as objects from a possible 616. plFiberPlate : 17 possible sky positions to use as objects from a possible 615. plFiberPlate : 50 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 43 possible sky positions to use as objects from a possible 612. plFiberPlate : 36 possible sky positions to use as objects from a possible 611. plFiberPlate : 29 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 10 possible sky positions to use as objects from a possible 608. plFiberPlate : 8 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 70 possible sky positions to use as objects from a possible 605. plFiberPlate : 43 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : 6 possible sky positions to use as objects from a possible 602. plFiberPlate : 3 possible sky positions to use as objects from a possible 601. plFiberPlate : 1 possible sky positions to use as objects from a possible 600. plFiberPlate : 3 possible sky positions to use as objects from a possible 599. plFiberPlate : 13 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1620.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1621.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1621.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1622.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 118 2 13 98 3 10 99 4 9 108 5 9 110 6 6 99 7 7 93 8 10 103 9 6 113 10 13 158 11 9 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 102 44 plFiberPlate : adding spectro-photo std with objId = 3015 40 3 434 13 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 88 55 plFiberPlate : adding spectro-photo std with objId = 3015 40 3 436 33 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 89 47 plFiberPlate : adding spectro-photo std with objId = 3015 40 4 429 33 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 88 109 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 90 61 plFiberPlate : 132 possible sky positions to use as objects from a possible 612. plFiberPlate : 104 possible sky positions to use as objects from a possible 611. plFiberPlate : 84 possible sky positions to use as objects from a possible 610. plFiberPlate : 34 possible sky positions to use as objects from a possible 609. plFiberPlate : 37 possible sky positions to use as objects from a possible 608. plFiberPlate : 38 possible sky positions to use as objects from a possible 607. plFiberPlate : 57 possible sky positions to use as objects from a possible 606. plFiberPlate : 80 possible sky positions to use as objects from a possible 605. plFiberPlate : 79 possible sky positions to use as objects from a possible 604. plFiberPlate : 57 possible sky positions to use as objects from a possible 603. plFiberPlate : 53 possible sky positions to use as objects from a possible 602. plFiberPlate : 38 possible sky positions to use as objects from a possible 601. plFiberPlate : 28 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 21 possible sky positions to use as objects from a possible 598. plFiberPlate : 24 possible sky positions to use as objects from a possible 597. plFiberPlate : 73 possible sky positions to use as objects from a possible 596. plFiberPlate : 64 possible sky positions to use as objects from a possible 595. plFiberPlate : 45 possible sky positions to use as objects from a possible 594. plFiberPlate : 40 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 19 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 41 possible sky positions to use as objects from a possible 586. plFiberPlate : 29 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 8 possible sky positions to use as objects from a possible 581. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1621.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1622.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1622.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1623.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 107 2 12 102 3 9 94 4 7 110 5 8 124 6 4 105 7 6 88 8 6 105 9 6 122 10 14 154 11 7 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 40 1 441 69 plFiberPlate : adding spectro-photo std with objId = 3015 40 6 445 24 plFiberPlate : adding spectro-photo std with objId = 3015 40 5 448 39 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 99 56 plFiberPlate : adding spectro-photo std with objId = 3015 40 3 436 33 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 113 68 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 110 47 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 114 10 plFiberPlate : 117 possible sky positions to use as objects from a possible 607. plFiberPlate : 69 possible sky positions to use as objects from a possible 606. plFiberPlate : 50 possible sky positions to use as objects from a possible 605. plFiberPlate : 36 possible sky positions to use as objects from a possible 604. plFiberPlate : 26 possible sky positions to use as objects from a possible 603. plFiberPlate : 22 possible sky positions to use as objects from a possible 602. plFiberPlate : 29 possible sky positions to use as objects from a possible 601. plFiberPlate : 91 possible sky positions to use as objects from a possible 600. plFiberPlate : 59 possible sky positions to use as objects from a possible 599. plFiberPlate : 31 possible sky positions to use as objects from a possible 598. plFiberPlate : 20 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 11 possible sky positions to use as objects from a possible 592. plFiberPlate : 92 possible sky positions to use as objects from a possible 591. plFiberPlate : 70 possible sky positions to use as objects from a possible 590. plFiberPlate : 58 possible sky positions to use as objects from a possible 589. plFiberPlate : 24 possible sky positions to use as objects from a possible 588. plFiberPlate : 17 possible sky positions to use as objects from a possible 587. plFiberPlate : 22 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 16 possible sky positions to use as objects from a possible 583. plFiberPlate : 44 possible sky positions to use as objects from a possible 582. plFiberPlate : 34 possible sky positions to use as objects from a possible 581. plFiberPlate : 17 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 15 possible sky positions to use as objects from a possible 578. plFiberPlate : 9 possible sky positions to use as objects from a possible 577. plFiberPlate : 9 possible sky positions to use as objects from a possible 576. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1622.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1623.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1623.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1624.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 114 2 9 96 3 7 80 4 8 114 5 11 145 6 11 96 7 12 73 8 12 96 9 5 103 10 13 144 11 7 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 127 84 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 12 48 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 122 72 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 19 8 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 126 124 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 18 7 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 114 10 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 123 61 plFiberPlate : 95 possible sky positions to use as objects from a possible 611. plFiberPlate : 59 possible sky positions to use as objects from a possible 610. plFiberPlate : 50 possible sky positions to use as objects from a possible 609. plFiberPlate : 44 possible sky positions to use as objects from a possible 608. plFiberPlate : 22 possible sky positions to use as objects from a possible 607. plFiberPlate : 28 possible sky positions to use as objects from a possible 606. plFiberPlate : 32 possible sky positions to use as objects from a possible 605. plFiberPlate : 110 possible sky positions to use as objects from a possible 604. plFiberPlate : 35 possible sky positions to use as objects from a possible 603. plFiberPlate : 19 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 23 possible sky positions to use as objects from a possible 599. plFiberPlate : 10 possible sky positions to use as objects from a possible 598. plFiberPlate : 12 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 119 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 11 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 7 possible sky positions to use as objects from a possible 588. plFiberPlate : 17 possible sky positions to use as objects from a possible 587. plFiberPlate : 27 possible sky positions to use as objects from a possible 586. plFiberPlate : 24 possible sky positions to use as objects from a possible 585. plFiberPlate : 3 possible sky positions to use as objects from a possible 584. plFiberPlate : 4 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 7 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1623.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1624.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1624.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1625.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 116 2 7 92 3 6 87 4 4 123 5 15 127 6 12 99 7 6 81 8 13 89 9 8 94 10 16 162 11 9 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 131 133 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 19 8 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 133 5 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 141 63 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 18 7 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 25 44 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 23 45 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 123 61 plFiberPlate : 122 possible sky positions to use as objects from a possible 590. plFiberPlate : 55 possible sky positions to use as objects from a possible 589. plFiberPlate : 26 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 43 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 35 possible sky positions to use as objects from a possible 584. plFiberPlate : 118 possible sky positions to use as objects from a possible 583. plFiberPlate : 64 possible sky positions to use as objects from a possible 582. plFiberPlate : 24 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 22 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : 19 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 7 possible sky positions to use as objects from a possible 575. plFiberPlate : 62 possible sky positions to use as objects from a possible 574. plFiberPlate : 27 possible sky positions to use as objects from a possible 573. plFiberPlate : 9 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 10 possible sky positions to use as objects from a possible 570. plFiberPlate : 3 possible sky positions to use as objects from a possible 569. plFiberPlate : 7 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 37 possible sky positions to use as objects from a possible 565. plFiberPlate : 30 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 4 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 10 possible sky positions to use as objects from a possible 559. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1624.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1625.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1625.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1626.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 127 2 9 72 3 6 68 4 10 107 5 12 113 6 7 91 7 8 81 8 9 105 9 12 102 10 18 136 11 9 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3842 41 4 38 2 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 40 10 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 29 27 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 141 63 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 147 69 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 41 2 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 37 58 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 34 14 plFiberPlate : 104 possible sky positions to use as objects from a possible 562. plFiberPlate : 56 possible sky positions to use as objects from a possible 561. plFiberPlate : 49 possible sky positions to use as objects from a possible 560. plFiberPlate : 17 possible sky positions to use as objects from a possible 559. plFiberPlate : 28 possible sky positions to use as objects from a possible 558. plFiberPlate : 30 possible sky positions to use as objects from a possible 557. plFiberPlate : 47 possible sky positions to use as objects from a possible 556. plFiberPlate : 92 possible sky positions to use as objects from a possible 555. plFiberPlate : 57 possible sky positions to use as objects from a possible 554. plFiberPlate : 30 possible sky positions to use as objects from a possible 553. plFiberPlate : 17 possible sky positions to use as objects from a possible 552. plFiberPlate : 12 possible sky positions to use as objects from a possible 551. plFiberPlate : 20 possible sky positions to use as objects from a possible 550. plFiberPlate : 34 possible sky positions to use as objects from a possible 549. plFiberPlate : 9 possible sky positions to use as objects from a possible 548. plFiberPlate : 31 possible sky positions to use as objects from a possible 547. plFiberPlate : 38 possible sky positions to use as objects from a possible 546. plFiberPlate : 43 possible sky positions to use as objects from a possible 545. plFiberPlate : 35 possible sky positions to use as objects from a possible 544. plFiberPlate : 33 possible sky positions to use as objects from a possible 543. plFiberPlate : 22 possible sky positions to use as objects from a possible 542. plFiberPlate : 19 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 23 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 33 possible sky positions to use as objects from a possible 537. plFiberPlate : 33 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 9 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : 17 possible sky positions to use as objects from a possible 531. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1625.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1626.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1626.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1627.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 7 103 3 3 89 4 7 100 5 9 120 6 11 98 7 10 108 8 7 123 9 7 108 10 11 148 11 10 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 154 32 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 41 67 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 40 10 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 152 146 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 41 2 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 52 66 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 47 31 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 37 58 plFiberPlate : 103 possible sky positions to use as objects from a possible 620. plFiberPlate : 91 possible sky positions to use as objects from a possible 619. plFiberPlate : 58 possible sky positions to use as objects from a possible 618. plFiberPlate : 39 possible sky positions to use as objects from a possible 617. plFiberPlate : 29 possible sky positions to use as objects from a possible 616. plFiberPlate : 36 possible sky positions to use as objects from a possible 615. plFiberPlate : 36 possible sky positions to use as objects from a possible 614. plFiberPlate : 74 possible sky positions to use as objects from a possible 613. plFiberPlate : 56 possible sky positions to use as objects from a possible 612. plFiberPlate : 32 possible sky positions to use as objects from a possible 611. plFiberPlate : 16 possible sky positions to use as objects from a possible 610. plFiberPlate : 5 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 9 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 83 possible sky positions to use as objects from a possible 604. plFiberPlate : 44 possible sky positions to use as objects from a possible 603. plFiberPlate : 41 possible sky positions to use as objects from a possible 602. plFiberPlate : 14 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 19 possible sky positions to use as objects from a possible 598. plFiberPlate : 37 possible sky positions to use as objects from a possible 597. plFiberPlate : 10 possible sky positions to use as objects from a possible 596. plFiberPlate : 44 possible sky positions to use as objects from a possible 595. plFiberPlate : 33 possible sky positions to use as objects from a possible 594. plFiberPlate : 23 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1626.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1627.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1627.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.2/plPlugMapP-1628.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 117 2 7 100 3 3 95 4 7 121 5 7 130 6 6 114 7 8 96 8 8 105 9 10 100 10 7 145 11 7 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 164 46 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 167 34 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 58 69 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 157 97 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 64 12 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 52 30 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 52 66 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 47 31 plFiberPlate : 102 possible sky positions to use as objects from a possible 628. plFiberPlate : 79 possible sky positions to use as objects from a possible 627. plFiberPlate : 53 possible sky positions to use as objects from a possible 626. plFiberPlate : 48 possible sky positions to use as objects from a possible 625. plFiberPlate : 30 possible sky positions to use as objects from a possible 624. plFiberPlate : 19 possible sky positions to use as objects from a possible 623. plFiberPlate : 29 possible sky positions to use as objects from a possible 622. plFiberPlate : 102 possible sky positions to use as objects from a possible 621. plFiberPlate : 51 possible sky positions to use as objects from a possible 620. plFiberPlate : 38 possible sky positions to use as objects from a possible 619. plFiberPlate : 17 possible sky positions to use as objects from a possible 618. plFiberPlate : 8 possible sky positions to use as objects from a possible 617. plFiberPlate : 8 possible sky positions to use as objects from a possible 616. plFiberPlate : 11 possible sky positions to use as objects from a possible 615. plFiberPlate : 8 possible sky positions to use as objects from a possible 614. plFiberPlate : 41 possible sky positions to use as objects from a possible 613. plFiberPlate : 78 possible sky positions to use as objects from a possible 612. plFiberPlate : 61 possible sky positions to use as objects from a possible 611. plFiberPlate : 39 possible sky positions to use as objects from a possible 610. plFiberPlate : 13 possible sky positions to use as objects from a possible 609. plFiberPlate : 6 possible sky positions to use as objects from a possible 608. plFiberPlate : 8 possible sky positions to use as objects from a possible 607. plFiberPlate : 9 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 8 possible sky positions to use as objects from a possible 604. plFiberPlate : 58 possible sky positions to use as objects from a possible 603. plFiberPlate : 35 possible sky positions to use as objects from a possible 602. plFiberPlate : 17 possible sky positions to use as objects from a possible 601. plFiberPlate : 6 possible sky positions to use as objects from a possible 600. plFiberPlate : 8 possible sky positions to use as objects from a possible 599. plFiberPlate : 9 possible sky positions to use as objects from a possible 598. plFiberPlate : 12 possible sky positions to use as objects from a possible 597. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1627.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1628.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.2/plOverlay-1628.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Sep 30 11:22:06 CDT 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 12 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1617.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1617.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1617.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1618.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1618.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1618.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1619.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1619.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1619.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1620.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1620.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1620.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1621.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1621.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1621.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1622.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.7911,11.8427) and (-1.75,12.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1622.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1622.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1623.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2651,7.6409) and (-11.00,6.31) plMakeFanucCodes : fixed path between (-4.0270,-11.6758) and (-2.03,-12.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1623.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1623.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1624.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1624.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1624.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1625.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1625.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1625.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1626.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1626.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1626.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1627.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.3393,-10.3772) and (6.29,-11.07) plMakeFanucCodes : fixed path between (6.2915,-11.0705) and (5.27,-11.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1627.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1627.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1628.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1628.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.2/plFanuc-1628.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Sep 30 11:22:43 CDT 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8b70c8c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 12 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1617 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1618 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1619 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1620 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1621 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1622 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1623 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1624 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1625 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1626 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1627 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1628 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Sep 30 11:22:53 CDT 2003 Begin running "plateEnder dr2003.10.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.10.2 -morePipes 1" failed. PS: Read file for stderr output of this job.