Sender: LSF System Subject: Job 2457: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed May 26 11:38:15 2004 Results reported at Wed May 26 11:40:41 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_249 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.06.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 129.61 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed May 26 11:38:18 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed May 26 11:38:23 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/sdsscp/v1_34/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_2/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_249/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed May 26 11:38:23 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_249/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_2/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_34/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_dg5LRX --------------------------------------------------------------- --------------------------------------------------------------- Wed May 26 11:38:23 CDT 2004 Begin running plate --------------------------------------------------------------- Wed May 26 11:38:23 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8be49f4 makePlates : beginning loop over plObs chain; makePlates : making 16 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1294.par makePlates : plateInfo struct for plate 1864 : (h4).mjd 53351 (h4).raCen 111.1796 (h4).decCen 41.46192 (h4).haCen -36 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 111.180 41.462 111.180 42.962 plMakePlateFromTile : mjd of obs : 53351.688129 Observed HA/dec of plate center, fiducial point (deg) : -36.002 41.452 -36.003 42.951 The rotation angle of the fid. point is 95.170766 plMakePlateFromTile : beginning loop over 1127 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1295.par makePlates : plateInfo struct for plate 1865 : (h4).mjd 53351 (h4).raCen 112.0923 (h4).decCen 43.03615 (h4).haCen -37 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 112.092 43.036 112.092 44.536 plMakePlateFromTile : mjd of obs : 53351.687889 Observed HA/dec of plate center, fiducial point (deg) : -37.002 43.025 -37.003 44.525 The rotation angle of the fid. point is 97.051855 plMakePlateFromTile : beginning loop over 1274 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1296.par makePlates : plateInfo struct for plate 1866 : (h4).mjd 53351 (h4).raCen 113.3062 (h4).decCen 44.91748 (h4).haCen -38 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 113.306 44.917 113.306 46.417 plMakePlateFromTile : mjd of obs : 53351.688483 Observed HA/dec of plate center, fiducial point (deg) : -38.002 44.905 -38.003 46.405 The rotation angle of the fid. point is 99.269784 plMakePlateFromTile : beginning loop over 1303 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1297.par makePlates : plateInfo struct for plate 1867 : (h4).mjd 53351 (h4).raCen 114.7828 (h4).decCen 47.21143 (h4).haCen -39 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 114.783 47.211 114.783 48.711 plMakePlateFromTile : mjd of obs : 53351.689806 Observed HA/dec of plate center, fiducial point (deg) : -39.002 47.198 -39.003 48.697 The rotation angle of the fid. point is 101.929128 plMakePlateFromTile : beginning loop over 1284 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1298.par makePlates : plateInfo struct for plate 1868 : (h4).mjd 53351 (h4).raCen 116.8705 (h4).decCen 49.27671 (h4).haCen -41 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.871 49.277 116.870 50.777 plMakePlateFromTile : mjd of obs : 53351.690049 Observed HA/dec of plate center, fiducial point (deg) : -41.002 49.262 -41.003 50.761 The rotation angle of the fid. point is 103.036508 plMakePlateFromTile : beginning loop over 1373 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1299.par makePlates : plateInfo struct for plate 1869 : (h4).mjd 53351 (h4).raCen 118.0187 (h4).decCen 51.11288 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.019 51.113 118.019 52.613 plMakePlateFromTile : mjd of obs : 53351.729262 Observed HA/dec of plate center, fiducial point (deg) : -28.002 51.095 -28.004 52.595 The rotation angle of the fid. point is 121.083049 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1300.par makePlates : plateInfo struct for plate 1870 : (h4).mjd 53351 (h4).raCen 119.7374 (h4).decCen 52.80097 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.737 52.801 119.737 54.301 plMakePlateFromTile : mjd of obs : 53351.731255 Observed HA/dec of plate center, fiducial point (deg) : -29.002 52.782 -29.004 54.281 The rotation angle of the fid. point is 122.373175 plMakePlateFromTile : beginning loop over 1366 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1301.par makePlates : plateInfo struct for plate 1871 : (h4).mjd 53351 (h4).raCen 121.7383 (h4).decCen 54.76287 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.738 54.763 121.738 56.263 plMakePlateFromTile : mjd of obs : 53351.731258 Observed HA/dec of plate center, fiducial point (deg) : -31.002 54.742 -31.004 56.242 The rotation angle of the fid. point is 122.536461 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1302.par makePlates : plateInfo struct for plate 1872 : (h4).mjd 53351 (h4).raCen 123.4459 (h4).decCen 56.53398 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.446 56.534 123.446 58.034 plMakePlateFromTile : mjd of obs : 53351.730448 Observed HA/dec of plate center, fiducial point (deg) : -33.002 56.512 -33.004 58.012 The rotation angle of the fid. point is 122.316469 plMakePlateFromTile : beginning loop over 1293 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1303.par makePlates : plateInfo struct for plate 1873 : (h4).mjd 53351 (h4).raCen 125.6855 (h4).decCen 58.30127 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.686 58.301 125.686 59.801 plMakePlateFromTile : mjd of obs : 53351.772686 Observed HA/dec of plate center, fiducial point (deg) : -20.002 58.277 -20.004 59.776 The rotation angle of the fid. point is 143.444928 plMakePlateFromTile : beginning loop over 1301 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1304.par makePlates : plateInfo struct for plate 1874 : (h4).mjd 53351 (h4).raCen 128.3827 (h4).decCen 60.31861 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.383 60.319 128.383 61.819 plMakePlateFromTile : mjd of obs : 53351.771846 Observed HA/dec of plate center, fiducial point (deg) : -23.002 60.292 -23.004 61.792 The rotation angle of the fid. point is 140.910044 plMakePlateFromTile : beginning loop over 1263 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1305.par makePlates : plateInfo struct for plate 1875 : (h4).mjd 53351 (h4).raCen 131.6988 (h4).decCen 62.19945 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.699 62.199 131.699 63.699 plMakePlateFromTile : mjd of obs : 53351.772717 Observed HA/dec of plate center, fiducial point (deg) : -26.002 62.171 -26.004 63.670 The rotation angle of the fid. point is 138.458796 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1306.par makePlates : plateInfo struct for plate 1876 : (h4).mjd 53351 (h4).raCen 135.1112 (h4).decCen 64.01564 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.111 64.016 135.111 65.516 plMakePlateFromTile : mjd of obs : 53351.771082 Observed HA/dec of plate center, fiducial point (deg) : -30.002 63.985 -30.004 65.485 The rotation angle of the fid. point is 134.788475 plMakePlateFromTile : beginning loop over 1292 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1307.par makePlates : plateInfo struct for plate 1877 : (h4).mjd 53351 (h4).raCen 139.3211 (h4).decCen 65.7036 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.321 65.704 139.321 67.204 plMakePlateFromTile : mjd of obs : 53351.771650 Observed HA/dec of plate center, fiducial point (deg) : -34.002 65.671 -34.004 67.171 The rotation angle of the fid. point is 131.256385 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1308.par makePlates : plateInfo struct for plate 1878 : (h4).mjd 53351 (h4).raCen 143.6972 (h4).decCen 67.30701 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.697 67.307 143.697 68.807 plMakePlateFromTile : mjd of obs : 53351.814262 Observed HA/dec of plate center, fiducial point (deg) : -23.002 67.271 -23.004 68.771 The rotation angle of the fid. point is 146.964543 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-9.96, -111.37, 8.2) and (-10.48, -111.59, 8.2) checkLTHo : distance = 0.559, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-10.48, -111.59, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk93/complete//plPlugMapT-1309.par makePlates : plateInfo struct for plate 1879 : (h4).mjd 53351 (h4).raCen 149.344 (h4).decCen 68.80155 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.344 68.802 149.344 70.302 plMakePlateFromTile : mjd of obs : 53351.813257 Observed HA/dec of plate center, fiducial point (deg) : -29.002 68.764 -29.003 70.263 The rotation angle of the fid. point is 140.221414 plMakePlateFromTile : beginning loop over 1270 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed May 26 11:38:46 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 16 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1864.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 117 2 17 56 3 2 7 4 9 25 5 12 49 6 16 59 7 17 82 8 26 95 9 21 94 10 29 59 11 23 71 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 1 34 70 plFiberPlate : adding spectro-photo std with objId = 4233 40 5 36 265 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 28 109 plFiberPlate : adding spectro-photo std with objId = 4233 40 3 36 261 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 39 106 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 38 59 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 34 200 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 14 223 plFiberPlate : 29 possible sky positions to use as objects from a possible 352. plFiberPlate : 8 possible sky positions to use as objects from a possible 351. plFiberPlate : 6 possible sky positions to use as objects from a possible 350. plFiberPlate : 3 possible sky positions to use as objects from a possible 349. plFiberPlate : 4 possible sky positions to use as objects from a possible 348. plFiberPlate : 10 possible sky positions to use as objects from a possible 347. plFiberPlate : 60 possible sky positions to use as objects from a possible 346. plFiberPlate : 16 possible sky positions to use as objects from a possible 345. plFiberPlate : 12 possible sky positions to use as objects from a possible 344. plFiberPlate : 9 possible sky positions to use as objects from a possible 343. plFiberPlate : 3 possible sky positions to use as objects from a possible 342. plFiberPlate : 0 possible sky positions to use as objects from a possible 341. plFiberPlate: No sky found for bundle at 26.748 -26.056, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 341. plFiberPlate: No sky found for bundle at 26.748 -26.056, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 341. plFiberPlate: No sky found for bundle at 26.748 -26.056, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 341. plFiberPlate : 2 possible sky positions to use as objects from a possible 340. plFiberPlate : 3 possible sky positions to use as objects from a possible 339. plFiberPlate : 4 possible sky positions to use as objects from a possible 338. plFiberPlate : 6 possible sky positions to use as objects from a possible 337. plFiberPlate : 37 possible sky positions to use as objects from a possible 336. plFiberPlate : 27 possible sky positions to use as objects from a possible 335. plFiberPlate : 19 possible sky positions to use as objects from a possible 334. plFiberPlate : 9 possible sky positions to use as objects from a possible 333. plFiberPlate : 3 possible sky positions to use as objects from a possible 332. plFiberPlate : 7 possible sky positions to use as objects from a possible 331. plFiberPlate : 9 possible sky positions to use as objects from a possible 330. plFiberPlate : 7 possible sky positions to use as objects from a possible 329. plFiberPlate : 21 possible sky positions to use as objects from a possible 328. plFiberPlate : 24 possible sky positions to use as objects from a possible 327. plFiberPlate : 15 possible sky positions to use as objects from a possible 326. plFiberPlate : 19 possible sky positions to use as objects from a possible 325. plFiberPlate : 11 possible sky positions to use as objects from a possible 324. plFiberPlate : 11 possible sky positions to use as objects from a possible 323. plFiberPlate : 12 possible sky positions to use as objects from a possible 322. plFiberPlate : 13 possible sky positions to use as objects from a possible 321. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1864.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1864.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1865.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 134 2 27 91 3 22 73 4 16 75 5 6 35 6 7 46 7 14 80 8 25 100 9 16 89 10 38 133 11 27 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 40 128 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 44 76 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 24 287 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 27 16 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 14 223 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 43 171 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 22 217 plFiberPlate : adding spectro-photo std with objId = 4208 40 5 55 266 plFiberPlate : 96 possible sky positions to use as objects from a possible 467. plFiberPlate : 78 possible sky positions to use as objects from a possible 466. plFiberPlate : 54 possible sky positions to use as objects from a possible 465. plFiberPlate : 33 possible sky positions to use as objects from a possible 464. plFiberPlate : 19 possible sky positions to use as objects from a possible 463. plFiberPlate : 14 possible sky positions to use as objects from a possible 462. plFiberPlate : 67 possible sky positions to use as objects from a possible 461. plFiberPlate : 58 possible sky positions to use as objects from a possible 460. plFiberPlate : 49 possible sky positions to use as objects from a possible 459. plFiberPlate : 14 possible sky positions to use as objects from a possible 458. plFiberPlate : 6 possible sky positions to use as objects from a possible 457. plFiberPlate : 7 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 4 possible sky positions to use as objects from a possible 454. plFiberPlate : 8 possible sky positions to use as objects from a possible 453. plFiberPlate : 31 possible sky positions to use as objects from a possible 452. plFiberPlate : 32 possible sky positions to use as objects from a possible 451. plFiberPlate : 23 possible sky positions to use as objects from a possible 450. plFiberPlate : 18 possible sky positions to use as objects from a possible 449. plFiberPlate : 15 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : 10 possible sky positions to use as objects from a possible 446. plFiberPlate : 5 possible sky positions to use as objects from a possible 445. plFiberPlate : 13 possible sky positions to use as objects from a possible 444. plFiberPlate : 27 possible sky positions to use as objects from a possible 443. plFiberPlate : 13 possible sky positions to use as objects from a possible 442. plFiberPlate : 16 possible sky positions to use as objects from a possible 441. plFiberPlate : 13 possible sky positions to use as objects from a possible 440. plFiberPlate : 6 possible sky positions to use as objects from a possible 439. plFiberPlate : 5 possible sky positions to use as objects from a possible 438. plFiberPlate : 14 possible sky positions to use as objects from a possible 437. plFiberPlate : 15 possible sky positions to use as objects from a possible 436. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1864.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1865.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1865.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1866.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 123 2 22 103 3 23 95 4 16 74 5 13 31 6 15 59 7 19 93 8 23 97 9 22 97 10 26 140 11 29 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 32 269 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 27 16 plFiberPlate : adding spectro-photo std with objId = 4208 40 5 77 61 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 54 107 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 65 53 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 33 179 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 36 99 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 40 90 plFiberPlate : 107 possible sky positions to use as objects from a possible 487. plFiberPlate : 65 possible sky positions to use as objects from a possible 486. plFiberPlate : 34 possible sky positions to use as objects from a possible 485. plFiberPlate : 19 possible sky positions to use as objects from a possible 484. plFiberPlate : 20 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 47 possible sky positions to use as objects from a possible 481. plFiberPlate : 30 possible sky positions to use as objects from a possible 480. plFiberPlate : 22 possible sky positions to use as objects from a possible 479. plFiberPlate : 17 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 11 possible sky positions to use as objects from a possible 476. plFiberPlate : 10 possible sky positions to use as objects from a possible 475. plFiberPlate : 2 possible sky positions to use as objects from a possible 474. plFiberPlate : 8 possible sky positions to use as objects from a possible 473. plFiberPlate : 28 possible sky positions to use as objects from a possible 472. plFiberPlate : 24 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : 16 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 10 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 8 possible sky positions to use as objects from a possible 465. plFiberPlate : 10 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : 22 possible sky positions to use as objects from a possible 462. plFiberPlate : 29 possible sky positions to use as objects from a possible 461. plFiberPlate : 13 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 14 possible sky positions to use as objects from a possible 458. plFiberPlate : 5 possible sky positions to use as objects from a possible 457. plFiberPlate : 19 possible sky positions to use as objects from a possible 456. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1865.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1866.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1866.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1867.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 128 2 18 90 3 15 77 4 12 67 5 11 45 6 10 67 7 19 96 8 25 113 9 25 96 10 21 131 11 20 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 66 124 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 43 113 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 42 167 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 59 95 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 45 112 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 59 110 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 53 36 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 53 55 plFiberPlate : 97 possible sky positions to use as objects from a possible 479. plFiberPlate : 65 possible sky positions to use as objects from a possible 478. plFiberPlate : 46 possible sky positions to use as objects from a possible 477. plFiberPlate : 21 possible sky positions to use as objects from a possible 476. plFiberPlate : 16 possible sky positions to use as objects from a possible 475. plFiberPlate : 17 possible sky positions to use as objects from a possible 474. plFiberPlate : 75 possible sky positions to use as objects from a possible 473. plFiberPlate : 69 possible sky positions to use as objects from a possible 472. plFiberPlate : 62 possible sky positions to use as objects from a possible 471. plFiberPlate : 42 possible sky positions to use as objects from a possible 470. plFiberPlate : 32 possible sky positions to use as objects from a possible 469. plFiberPlate : 22 possible sky positions to use as objects from a possible 468. plFiberPlate : 11 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 20 possible sky positions to use as objects from a possible 465. plFiberPlate : 59 possible sky positions to use as objects from a possible 464. plFiberPlate : 30 possible sky positions to use as objects from a possible 463. plFiberPlate : 28 possible sky positions to use as objects from a possible 462. plFiberPlate : 24 possible sky positions to use as objects from a possible 461. plFiberPlate : 17 possible sky positions to use as objects from a possible 460. plFiberPlate : 3 possible sky positions to use as objects from a possible 459. plFiberPlate : 7 possible sky positions to use as objects from a possible 458. plFiberPlate : 9 possible sky positions to use as objects from a possible 457. plFiberPlate : 15 possible sky positions to use as objects from a possible 456. plFiberPlate : 24 possible sky positions to use as objects from a possible 455. plFiberPlate : 30 possible sky positions to use as objects from a possible 454. plFiberPlate : 23 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 4 possible sky positions to use as objects from a possible 451. plFiberPlate : 21 possible sky positions to use as objects from a possible 450. plFiberPlate : 15 possible sky positions to use as objects from a possible 449. plFiberPlate : 45 possible sky positions to use as objects from a possible 448. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1866.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1867.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1867.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1868.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 148 2 23 111 3 18 79 4 24 96 5 18 81 6 18 87 7 13 64 8 22 85 9 19 94 10 31 157 11 25 128 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 99 42 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 59 110 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 88 100 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 76 12 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 65 223 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 100 113 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 110 29 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 69 45 plFiberPlate : 108 possible sky positions to use as objects from a possible 545. plFiberPlate : 82 possible sky positions to use as objects from a possible 544. plFiberPlate : 50 possible sky positions to use as objects from a possible 543. plFiberPlate : 33 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 18 possible sky positions to use as objects from a possible 540. plFiberPlate : 106 possible sky positions to use as objects from a possible 539. plFiberPlate : 83 possible sky positions to use as objects from a possible 538. plFiberPlate : 76 possible sky positions to use as objects from a possible 537. plFiberPlate : 63 possible sky positions to use as objects from a possible 536. plFiberPlate : 50 possible sky positions to use as objects from a possible 535. plFiberPlate : 43 possible sky positions to use as objects from a possible 534. plFiberPlate : 30 possible sky positions to use as objects from a possible 533. plFiberPlate : 23 possible sky positions to use as objects from a possible 532. plFiberPlate : 36 possible sky positions to use as objects from a possible 531. plFiberPlate : 97 possible sky positions to use as objects from a possible 530. plFiberPlate : 46 possible sky positions to use as objects from a possible 529. plFiberPlate : 23 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 7 possible sky positions to use as objects from a possible 524. plFiberPlate : 4 possible sky positions to use as objects from a possible 523. plFiberPlate : 9 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 34 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 4 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : 4 possible sky positions to use as objects from a possible 516. plFiberPlate : 1 possible sky positions to use as objects from a possible 515. plFiberPlate : 8 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1867.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1868.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1868.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1869.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 107 2 24 104 3 25 104 4 22 103 5 12 60 6 18 66 7 21 74 8 24 85 9 36 87 10 36 155 11 27 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 109 55 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 85 54 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 86 152 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 108 154 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 76 12 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 78 82 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 124 101 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 103 149 plFiberPlate : 138 possible sky positions to use as objects from a possible 504. plFiberPlate : 34 possible sky positions to use as objects from a possible 503. plFiberPlate : 20 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 10 possible sky positions to use as objects from a possible 499. plFiberPlate : 24 possible sky positions to use as objects from a possible 498. plFiberPlate : 41 possible sky positions to use as objects from a possible 497. plFiberPlate : 28 possible sky positions to use as objects from a possible 496. plFiberPlate : 9 possible sky positions to use as objects from a possible 495. plFiberPlate : 7 possible sky positions to use as objects from a possible 494. plFiberPlate : 3 possible sky positions to use as objects from a possible 493. plFiberPlate : 4 possible sky positions to use as objects from a possible 492. plFiberPlate : 3 possible sky positions to use as objects from a possible 491. plFiberPlate : 3 possible sky positions to use as objects from a possible 490. plFiberPlate : 17 possible sky positions to use as objects from a possible 489. plFiberPlate : 37 possible sky positions to use as objects from a possible 488. plFiberPlate : 20 possible sky positions to use as objects from a possible 487. plFiberPlate : 13 possible sky positions to use as objects from a possible 486. plFiberPlate : 5 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 9 possible sky positions to use as objects from a possible 481. plFiberPlate : 12 possible sky positions to use as objects from a possible 480. plFiberPlate : 13 possible sky positions to use as objects from a possible 479. plFiberPlate : 13 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 9 possible sky positions to use as objects from a possible 473. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1868.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1869.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1869.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1870.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 112 2 24 88 3 27 89 4 25 103 5 23 80 6 21 76 7 24 91 8 30 108 9 37 98 10 38 138 11 36 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 119 14 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 91 176 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 100 108 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 92 48 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 108 154 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 100 127 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 85 199 plFiberPlate : adding spectro-photo std with objId = 4208 40 5 130 199 plFiberPlate : 125 possible sky positions to use as objects from a possible 536. plFiberPlate : 69 possible sky positions to use as objects from a possible 535. plFiberPlate : 43 possible sky positions to use as objects from a possible 534. plFiberPlate : 22 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 27 possible sky positions to use as objects from a possible 531. plFiberPlate : 52 possible sky positions to use as objects from a possible 530. plFiberPlate : 53 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 10 possible sky positions to use as objects from a possible 527. plFiberPlate : 3 possible sky positions to use as objects from a possible 526. plFiberPlate : 2 possible sky positions to use as objects from a possible 525. plFiberPlate : 16 possible sky positions to use as objects from a possible 524. plFiberPlate : 13 possible sky positions to use as objects from a possible 523. plFiberPlate : 3 possible sky positions to use as objects from a possible 522. plFiberPlate : 27 possible sky positions to use as objects from a possible 521. plFiberPlate : 38 possible sky positions to use as objects from a possible 520. plFiberPlate : 43 possible sky positions to use as objects from a possible 519. plFiberPlate : 27 possible sky positions to use as objects from a possible 518. plFiberPlate : 15 possible sky positions to use as objects from a possible 517. plFiberPlate : 10 possible sky positions to use as objects from a possible 516. plFiberPlate : 14 possible sky positions to use as objects from a possible 515. plFiberPlate : 18 possible sky positions to use as objects from a possible 514. plFiberPlate : 16 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 38 possible sky positions to use as objects from a possible 511. plFiberPlate : 26 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 24 possible sky positions to use as objects from a possible 506. plFiberPlate : 16 possible sky positions to use as objects from a possible 505. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1869.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1870.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1870.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1871.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 108 2 24 92 3 26 104 4 28 114 5 21 83 6 12 77 7 20 84 8 23 95 9 31 95 10 32 159 11 22 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 106 100 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 116 149 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 100 108 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 100 127 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 115 17 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 111 43 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 104 116 plFiberPlate : adding spectro-photo std with objId = 4264 40 6 133 119 plFiberPlate : 132 possible sky positions to use as objects from a possible 542. plFiberPlate : 80 possible sky positions to use as objects from a possible 541. plFiberPlate : 50 possible sky positions to use as objects from a possible 540. plFiberPlate : 23 possible sky positions to use as objects from a possible 539. plFiberPlate : 28 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 34 possible sky positions to use as objects from a possible 536. plFiberPlate : 71 possible sky positions to use as objects from a possible 535. plFiberPlate : 46 possible sky positions to use as objects from a possible 534. plFiberPlate : 24 possible sky positions to use as objects from a possible 533. plFiberPlate : 7 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 7 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 9 possible sky positions to use as objects from a possible 528. plFiberPlate : 23 possible sky positions to use as objects from a possible 527. plFiberPlate : 40 possible sky positions to use as objects from a possible 526. plFiberPlate : 33 possible sky positions to use as objects from a possible 525. plFiberPlate : 18 possible sky positions to use as objects from a possible 524. plFiberPlate : 9 possible sky positions to use as objects from a possible 523. plFiberPlate : 5 possible sky positions to use as objects from a possible 522. plFiberPlate : 8 possible sky positions to use as objects from a possible 521. plFiberPlate : 16 possible sky positions to use as objects from a possible 520. plFiberPlate : 21 possible sky positions to use as objects from a possible 519. plFiberPlate : 3 possible sky positions to use as objects from a possible 518. plFiberPlate : 25 possible sky positions to use as objects from a possible 517. plFiberPlate : 37 possible sky positions to use as objects from a possible 516. plFiberPlate : 20 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : 27 possible sky positions to use as objects from a possible 512. plFiberPlate : 7 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1870.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1871.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1871.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1872.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 89 2 23 86 3 25 96 4 17 109 5 10 68 6 18 63 7 23 91 8 19 93 9 28 90 10 36 141 11 24 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 152 48 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 165 3 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 122 173 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 149 20 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 151 68 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 119 90 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 149 6 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 143 139 plFiberPlate : 127 possible sky positions to use as objects from a possible 499. plFiberPlate : 58 possible sky positions to use as objects from a possible 498. plFiberPlate : 15 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 19 possible sky positions to use as objects from a possible 495. plFiberPlate : 14 possible sky positions to use as objects from a possible 494. plFiberPlate : 17 possible sky positions to use as objects from a possible 493. plFiberPlate : 37 possible sky positions to use as objects from a possible 492. plFiberPlate : 38 possible sky positions to use as objects from a possible 491. plFiberPlate : 17 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 12 possible sky positions to use as objects from a possible 488. plFiberPlate : 6 possible sky positions to use as objects from a possible 487. plFiberPlate : 3 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 10 possible sky positions to use as objects from a possible 484. plFiberPlate : 38 possible sky positions to use as objects from a possible 483. plFiberPlate : 24 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 5 possible sky positions to use as objects from a possible 480. plFiberPlate : 9 possible sky positions to use as objects from a possible 479. plFiberPlate : 5 possible sky positions to use as objects from a possible 478. plFiberPlate : 3 possible sky positions to use as objects from a possible 477. plFiberPlate : 4 possible sky positions to use as objects from a possible 476. plFiberPlate : 20 possible sky positions to use as objects from a possible 475. plFiberPlate : 35 possible sky positions to use as objects from a possible 474. plFiberPlate : 25 possible sky positions to use as objects from a possible 473. plFiberPlate : 17 possible sky positions to use as objects from a possible 472. plFiberPlate : 13 possible sky positions to use as objects from a possible 471. plFiberPlate : 22 possible sky positions to use as objects from a possible 470. plFiberPlate : 19 possible sky positions to use as objects from a possible 469. plFiberPlate : 25 possible sky positions to use as objects from a possible 468. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1871.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1872.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1872.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1873.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 110 2 12 96 3 24 93 4 27 86 5 12 57 6 9 66 7 12 99 8 19 105 9 12 93 10 24 152 11 14 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 168 58 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 152 48 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 131 144 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 138 28 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 156 94 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 141 89 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 173 88 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 159 106 plFiberPlate : 111 possible sky positions to use as objects from a possible 527. plFiberPlate : 86 possible sky positions to use as objects from a possible 526. plFiberPlate : 63 possible sky positions to use as objects from a possible 525. plFiberPlate : 43 possible sky positions to use as objects from a possible 524. plFiberPlate : 32 possible sky positions to use as objects from a possible 523. plFiberPlate : 38 possible sky positions to use as objects from a possible 522. plFiberPlate : 29 possible sky positions to use as objects from a possible 521. plFiberPlate : 56 possible sky positions to use as objects from a possible 520. plFiberPlate : 44 possible sky positions to use as objects from a possible 519. plFiberPlate : 28 possible sky positions to use as objects from a possible 518. plFiberPlate : 31 possible sky positions to use as objects from a possible 517. plFiberPlate : 26 possible sky positions to use as objects from a possible 516. plFiberPlate : 17 possible sky positions to use as objects from a possible 515. plFiberPlate : 5 possible sky positions to use as objects from a possible 514. plFiberPlate : 20 possible sky positions to use as objects from a possible 513. plFiberPlate : 21 possible sky positions to use as objects from a possible 512. plFiberPlate : 19 possible sky positions to use as objects from a possible 511. plFiberPlate : 31 possible sky positions to use as objects from a possible 510. plFiberPlate : 26 possible sky positions to use as objects from a possible 509. plFiberPlate : 22 possible sky positions to use as objects from a possible 508. plFiberPlate : 8 possible sky positions to use as objects from a possible 507. plFiberPlate : 19 possible sky positions to use as objects from a possible 506. plFiberPlate : 4 possible sky positions to use as objects from a possible 505. plFiberPlate : 5 possible sky positions to use as objects from a possible 504. plFiberPlate : 14 possible sky positions to use as objects from a possible 503. plFiberPlate : 26 possible sky positions to use as objects from a possible 502. plFiberPlate : 26 possible sky positions to use as objects from a possible 501. plFiberPlate : 27 possible sky positions to use as objects from a possible 500. plFiberPlate : 22 possible sky positions to use as objects from a possible 499. plFiberPlate : 6 possible sky positions to use as objects from a possible 498. plFiberPlate : 25 possible sky positions to use as objects from a possible 497. plFiberPlate : 18 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1872.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1873.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1873.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1874.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 122 2 13 102 3 14 74 4 13 78 5 8 69 6 8 64 7 9 86 8 16 105 9 17 98 10 30 142 11 21 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 184 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 184 49 plFiberPlate : adding spectro-photo std with objId = 4264 40 1 179 50 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 171 61 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 145 89 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 147 97 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 153 62 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 157 131 plFiberPlate : 105 possible sky positions to use as objects from a possible 510. plFiberPlate : 75 possible sky positions to use as objects from a possible 509. plFiberPlate : 49 possible sky positions to use as objects from a possible 508. plFiberPlate : 26 possible sky positions to use as objects from a possible 507. plFiberPlate : 61 possible sky positions to use as objects from a possible 506. plFiberPlate : 32 possible sky positions to use as objects from a possible 505. plFiberPlate : 34 possible sky positions to use as objects from a possible 504. plFiberPlate : 61 possible sky positions to use as objects from a possible 503. plFiberPlate : 57 possible sky positions to use as objects from a possible 502. plFiberPlate : 49 possible sky positions to use as objects from a possible 501. plFiberPlate : 41 possible sky positions to use as objects from a possible 500. plFiberPlate : 21 possible sky positions to use as objects from a possible 499. plFiberPlate : 20 possible sky positions to use as objects from a possible 498. plFiberPlate : 17 possible sky positions to use as objects from a possible 497. plFiberPlate : 6 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 45 possible sky positions to use as objects from a possible 494. plFiberPlate : 41 possible sky positions to use as objects from a possible 493. plFiberPlate : 28 possible sky positions to use as objects from a possible 492. plFiberPlate : 16 possible sky positions to use as objects from a possible 491. plFiberPlate : 17 possible sky positions to use as objects from a possible 490. plFiberPlate : 18 possible sky positions to use as objects from a possible 489. plFiberPlate : 10 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 21 possible sky positions to use as objects from a possible 486. plFiberPlate : 29 possible sky positions to use as objects from a possible 485. plFiberPlate : 10 possible sky positions to use as objects from a possible 484. plFiberPlate : 10 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 15 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 5 possible sky positions to use as objects from a possible 479. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1873.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1874.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1874.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1875.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 116 2 17 91 3 17 93 4 21 100 5 11 67 6 5 67 7 11 96 8 14 119 9 10 106 10 26 145 11 17 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 175 2 plFiberPlate : adding spectro-photo std with objId = 4264 40 2 199 113 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 207 86 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 197 145 plFiberPlate : adding spectro-photo std with objId = 4208 40 6 210 49 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 210 76 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 192 124 plFiberPlate : adding spectro-photo std with objId = 4264 40 1 189 56 plFiberPlate : 127 possible sky positions to use as objects from a possible 543. plFiberPlate : 43 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 20 possible sky positions to use as objects from a possible 540. plFiberPlate : 32 possible sky positions to use as objects from a possible 539. plFiberPlate : 31 possible sky positions to use as objects from a possible 538. plFiberPlate : 32 possible sky positions to use as objects from a possible 537. plFiberPlate : 75 possible sky positions to use as objects from a possible 536. plFiberPlate : 41 possible sky positions to use as objects from a possible 535. plFiberPlate : 46 possible sky positions to use as objects from a possible 534. plFiberPlate : 28 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 24 possible sky positions to use as objects from a possible 528. plFiberPlate : 35 possible sky positions to use as objects from a possible 527. plFiberPlate : 25 possible sky positions to use as objects from a possible 526. plFiberPlate : 16 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 10 possible sky positions to use as objects from a possible 523. plFiberPlate : 12 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 42 possible sky positions to use as objects from a possible 518. plFiberPlate : 37 possible sky positions to use as objects from a possible 517. plFiberPlate : 32 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 11 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 75 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1874.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1875.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1875.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1876.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 107 2 12 84 3 11 90 4 12 114 5 14 63 6 10 63 7 13 95 8 11 110 9 15 99 10 22 165 11 22 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 206 42 plFiberPlate : adding spectro-photo std with objId = 4208 40 6 221 23 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 224 57 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 194 54 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 204 66 plFiberPlate : adding spectro-photo std with objId = 4294 40 2 186 2 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 216 70 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 205 47 plFiberPlate : 130 possible sky positions to use as objects from a possible 536. plFiberPlate : 72 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 32 possible sky positions to use as objects from a possible 532. plFiberPlate : 27 possible sky positions to use as objects from a possible 531. plFiberPlate : 47 possible sky positions to use as objects from a possible 530. plFiberPlate : 88 possible sky positions to use as objects from a possible 529. plFiberPlate : 69 possible sky positions to use as objects from a possible 528. plFiberPlate : 41 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 16 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 20 possible sky positions to use as objects from a possible 523. plFiberPlate : 29 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : 58 possible sky positions to use as objects from a possible 520. plFiberPlate : 49 possible sky positions to use as objects from a possible 519. plFiberPlate : 46 possible sky positions to use as objects from a possible 518. plFiberPlate : 32 possible sky positions to use as objects from a possible 517. plFiberPlate : 18 possible sky positions to use as objects from a possible 516. plFiberPlate : 27 possible sky positions to use as objects from a possible 515. plFiberPlate : 5 possible sky positions to use as objects from a possible 514. plFiberPlate : 9 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : 21 possible sky positions to use as objects from a possible 511. plFiberPlate : 23 possible sky positions to use as objects from a possible 510. plFiberPlate : 29 possible sky positions to use as objects from a possible 509. plFiberPlate : 13 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 7 possible sky positions to use as objects from a possible 506. plFiberPlate : 31 possible sky positions to use as objects from a possible 505. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1875.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1876.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1876.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1877.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 113 2 9 100 3 9 94 4 13 109 5 12 84 6 12 73 7 16 90 8 14 98 9 12 105 10 19 151 11 15 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4294 40 1 205 115 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 219 47 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 194 54 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 235 15 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 216 70 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 226 51 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 208 58 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 226 53 plFiberPlate : 122 possible sky positions to use as objects from a possible 547. plFiberPlate : 88 possible sky positions to use as objects from a possible 546. plFiberPlate : 49 possible sky positions to use as objects from a possible 545. plFiberPlate : 20 possible sky positions to use as objects from a possible 544. plFiberPlate : 42 possible sky positions to use as objects from a possible 543. plFiberPlate : 26 possible sky positions to use as objects from a possible 542. plFiberPlate : 40 possible sky positions to use as objects from a possible 541. plFiberPlate : 64 possible sky positions to use as objects from a possible 540. plFiberPlate : 46 possible sky positions to use as objects from a possible 539. plFiberPlate : 29 possible sky positions to use as objects from a possible 538. plFiberPlate : 11 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 54 possible sky positions to use as objects from a possible 531. plFiberPlate : 41 possible sky positions to use as objects from a possible 530. plFiberPlate : 24 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 17 possible sky positions to use as objects from a possible 525. plFiberPlate : 3 possible sky positions to use as objects from a possible 524. plFiberPlate : 30 possible sky positions to use as objects from a possible 523. plFiberPlate : 26 possible sky positions to use as objects from a possible 522. plFiberPlate : 28 possible sky positions to use as objects from a possible 521. plFiberPlate : 19 possible sky positions to use as objects from a possible 520. plFiberPlate : 21 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 21 possible sky positions to use as objects from a possible 516. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1876.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1877.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1877.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1878.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 102 2 12 82 3 13 90 4 11 121 5 13 94 6 10 71 7 12 89 8 21 109 9 15 105 10 14 136 11 10 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 211 23 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 233 106 plFiberPlate : adding spectro-photo std with objId = 4294 40 6 224 19 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 215 14 plFiberPlate : adding spectro-photo std with objId = 4264 40 5 247 90 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 208 58 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 211 42 plFiberPlate : adding spectro-photo std with objId = 4294 40 4 211 31 plFiberPlate : 117 possible sky positions to use as objects from a possible 551. plFiberPlate : 45 possible sky positions to use as objects from a possible 550. plFiberPlate : 25 possible sky positions to use as objects from a possible 549. plFiberPlate : 21 possible sky positions to use as objects from a possible 548. plFiberPlate : 13 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 50 possible sky positions to use as objects from a possible 545. plFiberPlate : 88 possible sky positions to use as objects from a possible 544. plFiberPlate : 40 possible sky positions to use as objects from a possible 543. plFiberPlate : 24 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 17 possible sky positions to use as objects from a possible 540. plFiberPlate : 8 possible sky positions to use as objects from a possible 539. plFiberPlate : 7 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 24 possible sky positions to use as objects from a possible 536. plFiberPlate : 78 possible sky positions to use as objects from a possible 535. plFiberPlate : 56 possible sky positions to use as objects from a possible 534. plFiberPlate : 31 possible sky positions to use as objects from a possible 533. plFiberPlate : 16 possible sky positions to use as objects from a possible 532. plFiberPlate : 3 possible sky positions to use as objects from a possible 531. plFiberPlate : 14 possible sky positions to use as objects from a possible 530. plFiberPlate : 21 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 28 possible sky positions to use as objects from a possible 527. plFiberPlate : 28 possible sky positions to use as objects from a possible 526. plFiberPlate : 28 possible sky positions to use as objects from a possible 525. plFiberPlate : 16 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 18 possible sky positions to use as objects from a possible 522. plFiberPlate : 15 possible sky positions to use as objects from a possible 521. plFiberPlate : 35 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1877.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1878.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1878.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.2/plPlugMapP-1879.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 100 2 11 74 3 15 90 4 18 113 5 21 94 6 16 65 7 14 59 8 15 70 9 15 99 10 21 154 11 14 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 249 71 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 230 79 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 256 28 plFiberPlate : adding spectro-photo std with objId = 4264 40 3 249 63 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 231 4 plFiberPlate : adding spectro-photo std with objId = 4294 40 3 230 93 plFiberPlate : adding spectro-photo std with objId = 4294 40 5 242 99 plFiberPlate : adding spectro-photo std with objId = 4264 40 4 265 97 plFiberPlate : 121 possible sky positions to use as objects from a possible 492. plFiberPlate : 64 possible sky positions to use as objects from a possible 491. plFiberPlate : 37 possible sky positions to use as objects from a possible 490. plFiberPlate : 15 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 33 possible sky positions to use as objects from a possible 487. plFiberPlate : 25 possible sky positions to use as objects from a possible 486. plFiberPlate : 70 possible sky positions to use as objects from a possible 485. plFiberPlate : 47 possible sky positions to use as objects from a possible 484. plFiberPlate : 30 possible sky positions to use as objects from a possible 483. plFiberPlate : 18 possible sky positions to use as objects from a possible 482. plFiberPlate : 14 possible sky positions to use as objects from a possible 481. plFiberPlate : 12 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 5 possible sky positions to use as objects from a possible 478. plFiberPlate : 33 possible sky positions to use as objects from a possible 477. plFiberPlate : 63 possible sky positions to use as objects from a possible 476. plFiberPlate : 40 possible sky positions to use as objects from a possible 475. plFiberPlate : 29 possible sky positions to use as objects from a possible 474. plFiberPlate : 18 possible sky positions to use as objects from a possible 473. plFiberPlate : 3 possible sky positions to use as objects from a possible 472. plFiberPlate : 6 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : 15 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 38 possible sky positions to use as objects from a possible 467. plFiberPlate : 25 possible sky positions to use as objects from a possible 466. plFiberPlate : 18 possible sky positions to use as objects from a possible 465. plFiberPlate : 7 possible sky positions to use as objects from a possible 464. plFiberPlate : 16 possible sky positions to use as objects from a possible 463. plFiberPlate : 15 possible sky positions to use as objects from a possible 462. plFiberPlate : 8 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1878.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1879.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.2/plOverlay-1879.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed May 26 11:39:10 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 16 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1864.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1864.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1864.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1865.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.8940,11.5116) and (3.97,12.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1865.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1865.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1866.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (2.7497,-12.4080) and (0.77,-12.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1866.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.8759,6.6383) and (-12.72,-0.40) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1866.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1867.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1867.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1867.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1868.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1868.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1868.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1869.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1869.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.1831,-11.6179) and (0.22,-12.77) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1869.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1870.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2166,-6.1578) and (11.59,-4.00) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1870.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1870.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1871.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1871.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1871.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1872.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1872.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1872.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1873.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1873.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1873.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1874.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1874.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1874.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1875.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1875.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1875.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1876.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1876.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1876.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1877.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1877.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.5003,10.1827) and (-1.66,12.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1877.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1878.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1878.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1878.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1879.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3447,2.9867) and (-12.57,1.91) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1879.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.2/plFanuc-1879.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed May 26 11:39:49 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8be8034 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 16 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1864 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1865 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1866 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1867 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1868 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1869 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1870 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1871 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1872 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1873 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1874 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1875 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1876 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1877 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1878 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1879 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed May 26 11:40:01 CDT 2004 Begin running "plateEnder dr2004.06.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.06.2 -morePipes 1" failed. PS: Read file for stderr output of this job.