Sender: LSF System Subject: Job 43031: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Apr 22 16:47:52 2005 Results reported at Fri Apr 22 16:51:20 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.04.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 58.57 sec. Max Memory : 11 MB Max Swap : 28 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Fri Apr 22 16:48:26 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Apr 22 16:49:33 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/data/dp0.b/users/hlin/d5/nvo/j2sdk1.4.2_07/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/apache-ant-1.5.2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/data/dp0.b/users/hlin/d5/nvo/j2sdk1.4.2_07/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/apache-ant-1.5.2/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_218/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_22/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Fri Apr 22 16:49:34 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_218/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_22/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Fri Apr 22 16:49:38 CDT 2005 Begin running plate --------------------------------------------------------------- Fri Apr 22 16:49:39 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9768374 makePlates : beginning loop over plObs chain; makePlates : making 6 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk115/complete//plPlugMapT-1580.par makePlates : plateInfo struct for plate 2196 : (h4).mjd 53519 (h4).raCen 240.41 (h4).decCen 16.74385 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 240.410 16.744 240.410 18.244 plMakePlateFromTile : mjd of obs : 53519.767461 Observed HA/dec of plate center, fiducial point (deg) : 28.998 16.733 28.998 18.232 The rotation angle of the fid. point is -53.056199 plMakePlateFromTile : beginning loop over 1313 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk115/complete//plPlugMapT-1581.par makePlates : plateInfo struct for plate 2197 : (h4).mjd 53519 (h4).raCen 241.504 (h4).decCen 16.01154 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.504 16.012 241.504 17.512 plMakePlateFromTile : mjd of obs : 53519.767721 Observed HA/dec of plate center, fiducial point (deg) : 27.998 16.001 27.998 17.500 The rotation angle of the fid. point is -51.359638 plMakePlateFromTile : beginning loop over 1225 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (107.67, 227.30, 6.3) and (107.26, 225.68, 5.1) checkLTHo : distance = 1.668, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(107.67, 227.30, 6.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk115/complete//plPlugMapT-1582.par makePlates : plateInfo struct for plate 2198 : (h4).mjd 53519 (h4).raCen 244.0343 (h4).decCen 15.23148 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 244.034 15.231 244.034 16.731 plMakePlateFromTile : mjd of obs : 53519.766418 Observed HA/dec of plate center, fiducial point (deg) : 24.998 15.222 24.998 16.721 The rotation angle of the fid. point is -47.808244 plMakePlateFromTile : beginning loop over 1249 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk115/complete//plPlugMapT-1583.par makePlates : plateInfo struct for plate 2199 : (h4).mjd 53519 (h4).raCen 240.5443 (h4).decCen 18.08204 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 240.544 18.082 240.544 19.582 plMakePlateFromTile : mjd of obs : 53519.767831 Observed HA/dec of plate center, fiducial point (deg) : 28.998 18.070 28.998 19.570 The rotation angle of the fid. point is -54.908874 plMakePlateFromTile : beginning loop over 1261 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk115/complete//plPlugMapT-1584.par makePlates : plateInfo struct for plate 2200 : (h4).mjd 53519 (h4).raCen 242.0676 (h4).decCen 17.37845 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.068 17.378 242.068 18.878 plMakePlateFromTile : mjd of obs : 53519.766509 Observed HA/dec of plate center, fiducial point (deg) : 26.998 17.368 26.998 18.867 The rotation angle of the fid. point is -52.500761 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-9.69, -70.47, 6.3) and (-10.10, -72.08, 5.1) checkLTHo : distance = 1.663, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-9.69, -70.47, 6.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk115/complete//plPlugMapT-1585.par makePlates : plateInfo struct for plate 2201 : (h4).mjd 53519 (h4).raCen 244.3661 (h4).decCen 16.13869 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 244.366 16.139 244.366 17.639 plMakePlateFromTile : mjd of obs : 53519.767336 Observed HA/dec of plate center, fiducial point (deg) : 24.998 16.129 24.998 17.629 The rotation angle of the fid. point is -49.064652 plMakePlateFromTile : beginning loop over 1270 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Apr 22 16:49:58 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 6 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.1/plPlugMapP-2196.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 84 2 6 44 3 8 32 4 13 65 5 17 137 6 18 109 7 12 83 8 16 96 9 15 115 10 17 96 11 13 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 288 52 plFiberPlate : adding spectro-photo std with objId = 4674 40 2 239 139 plFiberPlate : adding spectro-photo std with objId = 4674 40 2 242 24 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 282 17 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 281 120 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 289 64 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 376 50 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 304 100 plFiberPlate : 56 possible sky positions to use as objects from a possible 501. plFiberPlate : 9 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 7 possible sky positions to use as objects from a possible 498. plFiberPlate : 7 possible sky positions to use as objects from a possible 497. plFiberPlate : 20 possible sky positions to use as objects from a possible 496. plFiberPlate : 16 possible sky positions to use as objects from a possible 495. plFiberPlate : 63 possible sky positions to use as objects from a possible 494. plFiberPlate : 46 possible sky positions to use as objects from a possible 493. plFiberPlate : 42 possible sky positions to use as objects from a possible 492. plFiberPlate : 27 possible sky positions to use as objects from a possible 491. plFiberPlate : 9 possible sky positions to use as objects from a possible 490. plFiberPlate : 7 possible sky positions to use as objects from a possible 489. plFiberPlate : 3 possible sky positions to use as objects from a possible 488. plFiberPlate : 10 possible sky positions to use as objects from a possible 487. plFiberPlate : 34 possible sky positions to use as objects from a possible 486. plFiberPlate : 55 possible sky positions to use as objects from a possible 485. plFiberPlate : 42 possible sky positions to use as objects from a possible 484. plFiberPlate : 31 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 6 possible sky positions to use as objects from a possible 480. plFiberPlate : 13 possible sky positions to use as objects from a possible 479. plFiberPlate : 5 possible sky positions to use as objects from a possible 478. plFiberPlate : 25 possible sky positions to use as objects from a possible 477. plFiberPlate : 112 possible sky positions to use as objects from a possible 476. plFiberPlate : 76 possible sky positions to use as objects from a possible 475. plFiberPlate : 48 possible sky positions to use as objects from a possible 474. plFiberPlate : 43 possible sky positions to use as objects from a possible 473. plFiberPlate : 11 possible sky positions to use as objects from a possible 472. plFiberPlate : 11 possible sky positions to use as objects from a possible 471. plFiberPlate : 27 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2196.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2196.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.1/plPlugMapP-2197.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 115 2 8 45 3 2 9 4 6 32 5 17 96 6 14 90 7 20 81 8 19 101 9 17 105 10 16 70 11 16 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 288 112 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 284 47 plFiberPlate : adding spectro-photo std with objId = 4646 40 2 310 4 plFiberPlate : adding spectro-photo std with objId = 4674 40 2 257 39 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 289 64 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 376 50 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 293 107 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 301 161 plFiberPlate : 29 possible sky positions to use as objects from a possible 426. plFiberPlate : 5 possible sky positions to use as objects from a possible 425. plFiberPlate : 1 possible sky positions to use as objects from a possible 424. plFiberPlate : 9 possible sky positions to use as objects from a possible 423. plFiberPlate : 10 possible sky positions to use as objects from a possible 422. plFiberPlate : 24 possible sky positions to use as objects from a possible 421. plFiberPlate : 59 possible sky positions to use as objects from a possible 420. plFiberPlate : 26 possible sky positions to use as objects from a possible 419. plFiberPlate : 15 possible sky positions to use as objects from a possible 418. plFiberPlate : 11 possible sky positions to use as objects from a possible 417. plFiberPlate : 10 possible sky positions to use as objects from a possible 416. plFiberPlate : 9 possible sky positions to use as objects from a possible 415. plFiberPlate : 4 possible sky positions to use as objects from a possible 414. plFiberPlate : 9 possible sky positions to use as objects from a possible 413. plFiberPlate : 10 possible sky positions to use as objects from a possible 412. plFiberPlate : 22 possible sky positions to use as objects from a possible 411. plFiberPlate : 39 possible sky positions to use as objects from a possible 410. plFiberPlate : 32 possible sky positions to use as objects from a possible 409. plFiberPlate : 28 possible sky positions to use as objects from a possible 408. plFiberPlate : 28 possible sky positions to use as objects from a possible 407. plFiberPlate : 24 possible sky positions to use as objects from a possible 406. plFiberPlate : 21 possible sky positions to use as objects from a possible 405. plFiberPlate : 15 possible sky positions to use as objects from a possible 404. plFiberPlate : 17 possible sky positions to use as objects from a possible 403. plFiberPlate : 19 possible sky positions to use as objects from a possible 402. plFiberPlate : 50 possible sky positions to use as objects from a possible 401. plFiberPlate : 44 possible sky positions to use as objects from a possible 400. plFiberPlate : 25 possible sky positions to use as objects from a possible 399. plFiberPlate : 49 possible sky positions to use as objects from a possible 398. plFiberPlate : 10 possible sky positions to use as objects from a possible 397. plFiberPlate : 6 possible sky positions to use as objects from a possible 396. plFiberPlate : 11 possible sky positions to use as objects from a possible 395. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2196.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2197.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2197.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.1/plPlugMapP-2198.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 99 2 8 53 3 0 23 4 8 58 5 25 98 6 22 86 7 19 78 8 28 93 9 21 95 10 14 92 11 11 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 3 at -121.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4646 40 2 334 201 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 397 21 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 405 150 plFiberPlate : adding spectro-photo std with objId = 4674 40 3 265 84 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 314 134 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 313 173 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 301 161 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 314 132 plFiberPlate : 45 possible sky positions to use as objects from a possible 433. plFiberPlate : 22 possible sky positions to use as objects from a possible 432. plFiberPlate : 9 possible sky positions to use as objects from a possible 431. plFiberPlate : 20 possible sky positions to use as objects from a possible 430. plFiberPlate : 15 possible sky positions to use as objects from a possible 429. plFiberPlate : 7 possible sky positions to use as objects from a possible 428. plFiberPlate : 31 possible sky positions to use as objects from a possible 427. plFiberPlate : 44 possible sky positions to use as objects from a possible 426. plFiberPlate : 42 possible sky positions to use as objects from a possible 425. plFiberPlate : 25 possible sky positions to use as objects from a possible 424. plFiberPlate : 24 possible sky positions to use as objects from a possible 423. plFiberPlate : 12 possible sky positions to use as objects from a possible 422. plFiberPlate : 7 possible sky positions to use as objects from a possible 421. plFiberPlate : 7 possible sky positions to use as objects from a possible 420. plFiberPlate : 14 possible sky positions to use as objects from a possible 419. plFiberPlate : 16 possible sky positions to use as objects from a possible 418. plFiberPlate : 52 possible sky positions to use as objects from a possible 417. plFiberPlate : 45 possible sky positions to use as objects from a possible 416. plFiberPlate : 42 possible sky positions to use as objects from a possible 415. plFiberPlate : 32 possible sky positions to use as objects from a possible 414. plFiberPlate : 15 possible sky positions to use as objects from a possible 413. plFiberPlate : 14 possible sky positions to use as objects from a possible 412. plFiberPlate : 6 possible sky positions to use as objects from a possible 411. plFiberPlate : 11 possible sky positions to use as objects from a possible 410. plFiberPlate : 21 possible sky positions to use as objects from a possible 409. plFiberPlate : 55 possible sky positions to use as objects from a possible 408. plFiberPlate : 46 possible sky positions to use as objects from a possible 407. plFiberPlate : 24 possible sky positions to use as objects from a possible 406. plFiberPlate : 18 possible sky positions to use as objects from a possible 405. plFiberPlate : 12 possible sky positions to use as objects from a possible 404. plFiberPlate : 22 possible sky positions to use as objects from a possible 403. plFiberPlate : 13 possible sky positions to use as objects from a possible 402. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2197.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2198.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2198.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.1/plPlugMapP-2199.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 101 2 10 88 3 13 89 4 19 110 5 31 122 6 15 61 7 1 9 8 6 42 9 12 53 10 17 135 11 16 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 282 112 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 375 165 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 379 102 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 303 86 plFiberPlate : adding spectro-photo std with objId = 4646 40 2 306 105 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 376 50 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 310 101 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 304 100 plFiberPlate : 102 possible sky positions to use as objects from a possible 458. plFiberPlate : 75 possible sky positions to use as objects from a possible 457. plFiberPlate : 31 possible sky positions to use as objects from a possible 456. plFiberPlate : 17 possible sky positions to use as objects from a possible 455. plFiberPlate : 33 possible sky positions to use as objects from a possible 454. plFiberPlate : 21 possible sky positions to use as objects from a possible 453. plFiberPlate : 37 possible sky positions to use as objects from a possible 452. plFiberPlate : 75 possible sky positions to use as objects from a possible 451. plFiberPlate : 43 possible sky positions to use as objects from a possible 450. plFiberPlate : 19 possible sky positions to use as objects from a possible 449. plFiberPlate : 17 possible sky positions to use as objects from a possible 448. plFiberPlate : 12 possible sky positions to use as objects from a possible 447. plFiberPlate : 6 possible sky positions to use as objects from a possible 446. plFiberPlate : 4 possible sky positions to use as objects from a possible 445. plFiberPlate : 13 possible sky positions to use as objects from a possible 444. plFiberPlate : 13 possible sky positions to use as objects from a possible 443. plFiberPlate : 14 possible sky positions to use as objects from a possible 442. plFiberPlate : 12 possible sky positions to use as objects from a possible 441. plFiberPlate : 6 possible sky positions to use as objects from a possible 440. plFiberPlate : 2 possible sky positions to use as objects from a possible 439. plFiberPlate : 13 possible sky positions to use as objects from a possible 438. plFiberPlate : 6 possible sky positions to use as objects from a possible 437. plFiberPlate : 2 possible sky positions to use as objects from a possible 436. plFiberPlate : 5 possible sky positions to use as objects from a possible 435. plFiberPlate : 16 possible sky positions to use as objects from a possible 434. plFiberPlate : 28 possible sky positions to use as objects from a possible 433. plFiberPlate : 18 possible sky positions to use as objects from a possible 432. plFiberPlate : 10 possible sky positions to use as objects from a possible 431. plFiberPlate : 2 possible sky positions to use as objects from a possible 430. plFiberPlate : 1 possible sky positions to use as objects from a possible 429. plFiberPlate : 6 possible sky positions to use as objects from a possible 428. plFiberPlate : 12 possible sky positions to use as objects from a possible 427. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2198.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2199.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2199.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.1/plPlugMapP-2200.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 120 2 15 96 3 11 75 4 14 84 5 15 95 6 7 45 7 2 10 8 6 44 9 13 74 10 24 133 11 19 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 294 75 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 298 57 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 324 193 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 325 157 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 311 192 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 382 20 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 376 50 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 310 101 plFiberPlate : 90 possible sky positions to use as objects from a possible 439. plFiberPlate : 78 possible sky positions to use as objects from a possible 438. plFiberPlate : 63 possible sky positions to use as objects from a possible 437. plFiberPlate : 54 possible sky positions to use as objects from a possible 436. plFiberPlate : 28 possible sky positions to use as objects from a possible 435. plFiberPlate : 33 possible sky positions to use as objects from a possible 434. plFiberPlate : 45 possible sky positions to use as objects from a possible 433. plFiberPlate : 77 possible sky positions to use as objects from a possible 432. plFiberPlate : 61 possible sky positions to use as objects from a possible 431. plFiberPlate : 43 possible sky positions to use as objects from a possible 430. plFiberPlate : 26 possible sky positions to use as objects from a possible 429. plFiberPlate : 23 possible sky positions to use as objects from a possible 428. plFiberPlate : 11 possible sky positions to use as objects from a possible 427. plFiberPlate : 2 possible sky positions to use as objects from a possible 426. plFiberPlate : 5 possible sky positions to use as objects from a possible 425. plFiberPlate : 26 possible sky positions to use as objects from a possible 424. plFiberPlate : 39 possible sky positions to use as objects from a possible 423. plFiberPlate : 28 possible sky positions to use as objects from a possible 422. plFiberPlate : 25 possible sky positions to use as objects from a possible 421. plFiberPlate : 15 possible sky positions to use as objects from a possible 420. plFiberPlate : 14 possible sky positions to use as objects from a possible 419. plFiberPlate : 5 possible sky positions to use as objects from a possible 418. plFiberPlate : 8 possible sky positions to use as objects from a possible 417. plFiberPlate : 5 possible sky positions to use as objects from a possible 416. plFiberPlate : 9 possible sky positions to use as objects from a possible 415. plFiberPlate : 60 possible sky positions to use as objects from a possible 414. plFiberPlate : 45 possible sky positions to use as objects from a possible 413. plFiberPlate : 40 possible sky positions to use as objects from a possible 412. plFiberPlate : 29 possible sky positions to use as objects from a possible 411. plFiberPlate : 27 possible sky positions to use as objects from a possible 410. plFiberPlate : 24 possible sky positions to use as objects from a possible 409. plFiberPlate : 10 possible sky positions to use as objects from a possible 408. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2199.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2200.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2200.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.1/plPlugMapP-2201.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 93 2 20 78 3 12 78 4 20 95 5 23 105 6 11 57 7 2 24 8 10 47 9 15 76 10 33 124 11 27 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4674 40 5 276 184 plFiberPlate : adding spectro-photo std with objId = 4646 40 2 327 114 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 313 266 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 399 39 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 397 21 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 325 157 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 330 224 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 301 161 plFiberPlate : 110 possible sky positions to use as objects from a possible 438. plFiberPlate : 60 possible sky positions to use as objects from a possible 437. plFiberPlate : 43 possible sky positions to use as objects from a possible 436. plFiberPlate : 16 possible sky positions to use as objects from a possible 435. plFiberPlate : 20 possible sky positions to use as objects from a possible 434. plFiberPlate : 26 possible sky positions to use as objects from a possible 433. plFiberPlate : 38 possible sky positions to use as objects from a possible 432. plFiberPlate : 82 possible sky positions to use as objects from a possible 431. plFiberPlate : 64 possible sky positions to use as objects from a possible 430. plFiberPlate : 34 possible sky positions to use as objects from a possible 429. plFiberPlate : 21 possible sky positions to use as objects from a possible 428. plFiberPlate : 8 possible sky positions to use as objects from a possible 427. plFiberPlate : 7 possible sky positions to use as objects from a possible 426. plFiberPlate : 22 possible sky positions to use as objects from a possible 425. plFiberPlate : 25 possible sky positions to use as objects from a possible 424. plFiberPlate : 11 possible sky positions to use as objects from a possible 423. plFiberPlate : 66 possible sky positions to use as objects from a possible 422. plFiberPlate : 53 possible sky positions to use as objects from a possible 421. plFiberPlate : 37 possible sky positions to use as objects from a possible 420. plFiberPlate : 20 possible sky positions to use as objects from a possible 419. plFiberPlate : 13 possible sky positions to use as objects from a possible 418. plFiberPlate : 5 possible sky positions to use as objects from a possible 417. plFiberPlate : 9 possible sky positions to use as objects from a possible 416. plFiberPlate : 7 possible sky positions to use as objects from a possible 415. plFiberPlate : 8 possible sky positions to use as objects from a possible 414. plFiberPlate : 42 possible sky positions to use as objects from a possible 413. plFiberPlate : 41 possible sky positions to use as objects from a possible 412. plFiberPlate : 28 possible sky positions to use as objects from a possible 411. plFiberPlate : 22 possible sky positions to use as objects from a possible 410. plFiberPlate : 11 possible sky positions to use as objects from a possible 409. plFiberPlate : 9 possible sky positions to use as objects from a possible 408. plFiberPlate : 1 possible sky positions to use as objects from a possible 407. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2200.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2201.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.1/plOverlay-2201.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Apr 22 16:50:16 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 6 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2196.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.1728,11.1681) and (-4.93,11.42) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2196.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2196.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2197.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2197.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2197.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2198.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2198.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2198.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2199.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2199.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2199.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2200.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2200.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2200.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2201.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.0962,11.2171) and (-5.41,11.60) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2201.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.1/plFanuc-2201.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Apr 22 16:50:39 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x9392d5c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 6 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2196 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2197 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2198 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2199 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2200 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2201 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Apr 22 16:50:52 CDT 2005 Begin running "plateEnder dr2005.04.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.04.1 -morePipes 1" failed. PS: Read file for stderr output of this job.