Sender: LSF System Subject: Job 43044: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sun Apr 24 19:39:20 2005 Results reported at Sun Apr 24 19:44:16 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.04.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 115.80 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Sun Apr 24 19:40:02 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sun Apr 24 19:41:29 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_221/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Sun Apr 24 19:41:30 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_221/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Sun Apr 24 19:41:33 CDT 2005 Begin running plate --------------------------------------------------------------- Sun Apr 24 19:41:34 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xa4aa234 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8057.par makePlates : plateInfo struct for plate 2185 : (h4).mjd 53519 (h4).raCen 250.007 (h4).decCen 36.197 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.007 36.197 250.007 37.697 plMakePlateFromTile : mjd of obs : 53519.807874 Observed HA/dec of plate center, fiducial point (deg) : 33.998 36.185 33.998 37.684 The rotation angle of the fid. point is -86.922959 plMakePlateFromTile : beginning loop over 1669 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8058.par makePlates : plateInfo struct for plate 2186 : (h4).mjd 53519 (h4).raCen 241.40545 (h4).decCen 5.57236 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.405 5.572 241.405 7.072 plMakePlateFromTile : mjd of obs : 53519.767461 Observed HA/dec of plate center, fiducial point (deg) : 27.998 5.565 27.998 7.065 The rotation angle of the fid. point is -40.238578 plMakePlateFromTile : beginning loop over 1617 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8059.par makePlates : plateInfo struct for plate 2187 : (h4).mjd 53519 (h4).raCen 242.50726 (h4).decCen 52.36524 (h4).haCen 42 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.507 52.365 242.507 53.865 plMakePlateFromTile : mjd of obs : 53519.809252 Observed HA/dec of plate center, fiducial point (deg) : 41.998 52.346 41.999 53.846 The rotation angle of the fid. point is -106.264308 plMakePlateFromTile : beginning loop over 1663 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8060.par makePlates : plateInfo struct for plate 2188 : (h4).mjd 53519 (h4).raCen 243.76748 (h4).decCen 16.66577 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.767 16.666 243.767 18.166 plMakePlateFromTile : mjd of obs : 53519.768448 Observed HA/dec of plate center, fiducial point (deg) : 25.998 16.656 25.998 18.155 The rotation angle of the fid. point is -50.681913 plMakePlateFromTile : beginning loop over 1702 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8061.par makePlates : plateInfo struct for plate 2189 : (h4).mjd 53519 (h4).raCen 242.3285 (h4).decCen 4.0651 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.329 4.065 242.329 5.565 plMakePlateFromTile : mjd of obs : 53519.767249 Observed HA/dec of plate center, fiducial point (deg) : 26.998 4.059 26.998 5.558 The rotation angle of the fid. point is -38.112990 plMakePlateFromTile : beginning loop over 1657 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8062.par makePlates : plateInfo struct for plate 2190 : (h4).mjd 53519 (h4).raCen 311.15734 (h4).decCen 76.18196 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 311.157 76.182 311.157 77.682 plMakePlateFromTile : mjd of obs : 53519.852345 Observed HA/dec of plate center, fiducial point (deg) : -11.001 76.180 -10.988 77.679 The rotation angle of the fid. point is 166.467076 plMakePlateFromTile : beginning loop over 2003 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8063.par makePlates : plateInfo struct for plate 2191 : (h4).mjd 53519 (h4).raCen 253.11673 (h4).decCen 23.95015 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.117 23.950 253.117 25.450 plMakePlateFromTile : mjd of obs : 53519.808191 Observed HA/dec of plate center, fiducial point (deg) : 30.998 23.942 30.998 25.442 The rotation angle of the fid. point is -64.976651 plMakePlateFromTile : beginning loop over 1675 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8064.par makePlates : plateInfo struct for plate 2192 : (h4).mjd 53519 (h4).raCen 254.9235 (h4).decCen 39.64983 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.924 39.650 254.924 41.150 plMakePlateFromTile : mjd of obs : 53519.810402 Observed HA/dec of plate center, fiducial point (deg) : 29.998 39.638 29.999 41.138 The rotation angle of the fid. point is -96.481113 plMakePlateFromTile : beginning loop over 1649 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8065.par makePlates : plateInfo struct for plate 2193 : (h4).mjd 53519 (h4).raCen 261.18128 (h4).decCen 27.01436 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 261.181 27.014 261.181 28.514 plMakePlateFromTile : mjd of obs : 53519.808356 Observed HA/dec of plate center, fiducial point (deg) : 22.998 27.009 22.998 28.508 The rotation angle of the fid. point is -68.299536 plMakePlateFromTile : beginning loop over 1553 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8066.par makePlates : plateInfo struct for plate 2194 : (h4).mjd 53519 (h4).raCen 266.4694 (h4).decCen 25.43275 (h4).haCen 33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 266.469 25.433 266.469 26.933 plMakePlateFromTile : mjd of obs : 53519.850717 Observed HA/dec of plate center, fiducial point (deg) : 32.998 25.431 32.998 26.930 The rotation angle of the fid. point is -67.903068 plMakePlateFromTile : beginning loop over 1420 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8067.par makePlates : plateInfo struct for plate 2195 : (h4).mjd 53519 (h4).raCen 271.61278 (h4).decCen 23.66702 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 271.613 23.667 271.613 25.167 plMakePlateFromTile : mjd of obs : 53519.851112 Observed HA/dec of plate center, fiducial point (deg) : 27.998 23.668 27.998 25.167 The rotation angle of the fid. point is -63.401908 plMakePlateFromTile : beginning loop over 1499 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sun Apr 24 19:42:09 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 11 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2185.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 672 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 624 to list of science objects plFiberPlate : adding sky number 636 to list of science objects plFiberPlate : adding sky number 725 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 266 to list of science objects plFiberPlate : adding sky number 609 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 438 to list of science objects plFiberPlate : adding sky number 377 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 287 to list of science objects plFiberPlate : adding sky number 404 to list of science objects plFiberPlate : adding sky number 748 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 498 to list of science objects plFiberPlate : adding sky number 561 to list of science objects plFiberPlate : adding sky number 110 to list of science objects plFiberPlate : adding sky number 474 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 106 to list of science objects plFiberPlate : adding sky number 624 to list of science objects plFiberPlate : adding sky number 121 to list of science objects plFiberPlate : adding sky number 310 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 771 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 394 to list of science objects plFiberPlate : adding sky number 645 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 155 2 18 130 3 19 106 4 27 126 5 34 176 6 13 139 7 12 111 8 20 117 9 13 130 10 39 228 11 17 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 40 5 129 184 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 127 47 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 126 36 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 122 13 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 122 103 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 120 84 plFiberPlate : adding spectro-photo std with objId = 3226 40 2 120 30 plFiberPlate : adding spectro-photo std with objId = 3226 40 5 118 160 plFiberPlate : 156 possible sky positions to use as objects from a possible 768. plFiberPlate : 94 possible sky positions to use as objects from a possible 767. plFiberPlate : 44 possible sky positions to use as objects from a possible 766. plFiberPlate : 54 possible sky positions to use as objects from a possible 765. plFiberPlate : 38 possible sky positions to use as objects from a possible 764. plFiberPlate : 46 possible sky positions to use as objects from a possible 763. plFiberPlate : 54 possible sky positions to use as objects from a possible 762. plFiberPlate : 93 possible sky positions to use as objects from a possible 761. plFiberPlate : 42 possible sky positions to use as objects from a possible 760. plFiberPlate : 30 possible sky positions to use as objects from a possible 759. plFiberPlate : 9 possible sky positions to use as objects from a possible 758. plFiberPlate : 4 possible sky positions to use as objects from a possible 757. plFiberPlate : 1 possible sky positions to use as objects from a possible 756. plFiberPlate : 4 possible sky positions to use as objects from a possible 755. plFiberPlate : 33 possible sky positions to use as objects from a possible 754. plFiberPlate : 19 possible sky positions to use as objects from a possible 753. plFiberPlate : 55 possible sky positions to use as objects from a possible 752. plFiberPlate : 20 possible sky positions to use as objects from a possible 751. plFiberPlate : 1 possible sky positions to use as objects from a possible 750. plFiberPlate : 0 possible sky positions to use as objects from a possible 749. plFiberPlate: No sky found for bundle at 38.473 89.030, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 749. plFiberPlate: No sky found for bundle at 38.473 89.030, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 749. plFiberPlate: No sky found for bundle at 38.473 89.030, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 749. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 748. plFiberPlate: No sky found for bundle at 58.603 95.661, increase box by 70 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 748. plFiberPlate : 0 possible sky positions to use as objects from a possible 747. plFiberPlate: No sky found for bundle at 81.709 96.646, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 747. plFiberPlate: No sky found for bundle at 81.709 96.646, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 747. plFiberPlate: No sky found for bundle at 81.709 96.646, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 747. plFiberPlate: No sky found for bundle at 81.709 96.646, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 747. plFiberPlate : 0 possible sky positions to use as objects from a possible 746. plFiberPlate: No sky found for bundle at 104.871 65.592, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 746. plFiberPlate: No sky found for bundle at 104.871 65.592, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 746. plFiberPlate : 0 possible sky positions to use as objects from a possible 745. plFiberPlate: No sky found for bundle at 118.538 64.926, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 745. plFiberPlate: No sky found for bundle at 118.538 64.926, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 745. plFiberPlate: No sky found for bundle at 118.538 64.926, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 745. plFiberPlate: No sky found for bundle at 118.538 64.926, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 745. plFiberPlate : 32 possible sky positions to use as objects from a possible 744. plFiberPlate : 89 possible sky positions to use as objects from a possible 743. plFiberPlate : 61 possible sky positions to use as objects from a possible 742. plFiberPlate : 37 possible sky positions to use as objects from a possible 741. plFiberPlate : 26 possible sky positions to use as objects from a possible 740. plFiberPlate : 16 possible sky positions to use as objects from a possible 739. plFiberPlate : 16 possible sky positions to use as objects from a possible 738. plFiberPlate : 28 possible sky positions to use as objects from a possible 737. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2185.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2185.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2186.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 464 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 482 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 372 to list of science objects plFiberPlate : adding sky number 733 to list of science objects plFiberPlate : adding sky number 220 to list of science objects plFiberPlate : adding sky number 580 to list of science objects plFiberPlate : adding sky number 395 to list of science objects plFiberPlate : adding sky number 577 to list of science objects plFiberPlate : adding sky number 299 to list of science objects plFiberPlate : adding sky number 666 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 262 to list of science objects plFiberPlate : adding sky number 601 to list of science objects plFiberPlate : adding sky number 683 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 704 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 63 to list of science objects plFiberPlate : adding sky number 142 to list of science objects plFiberPlate : adding sky number 489 to list of science objects plFiberPlate : adding sky number 656 to list of science objects plFiberPlate : adding sky number 256 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 14 to list of science objects plFiberPlate : adding sky number 335 to list of science objects plFiberPlate : adding sky number 46 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 708 to list of science objects plFiberPlate : adding sky number 657 to list of science objects plFiberPlate : adding sky number 619 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 155 2 23 113 3 25 86 4 34 123 5 16 162 6 8 118 7 8 101 8 4 134 9 8 158 10 42 193 11 25 155 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 302 225 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 301 18 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 300 165 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 300 32 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 300 129 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 299 46 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 298 149 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 297 256 plFiberPlate : 118 possible sky positions to use as objects from a possible 727. plFiberPlate : 105 possible sky positions to use as objects from a possible 726. plFiberPlate : 53 possible sky positions to use as objects from a possible 725. plFiberPlate : 27 possible sky positions to use as objects from a possible 724. plFiberPlate : 37 possible sky positions to use as objects from a possible 723. plFiberPlate : 42 possible sky positions to use as objects from a possible 722. plFiberPlate : 53 possible sky positions to use as objects from a possible 721. plFiberPlate : 86 possible sky positions to use as objects from a possible 720. plFiberPlate : 66 possible sky positions to use as objects from a possible 719. plFiberPlate : 50 possible sky positions to use as objects from a possible 718. plFiberPlate : 36 possible sky positions to use as objects from a possible 717. plFiberPlate : 18 possible sky positions to use as objects from a possible 716. plFiberPlate : 19 possible sky positions to use as objects from a possible 715. plFiberPlate : 23 possible sky positions to use as objects from a possible 714. plFiberPlate : 19 possible sky positions to use as objects from a possible 713. plFiberPlate : 20 possible sky positions to use as objects from a possible 712. plFiberPlate : 83 possible sky positions to use as objects from a possible 711. plFiberPlate : 83 possible sky positions to use as objects from a possible 710. plFiberPlate : 59 possible sky positions to use as objects from a possible 709. plFiberPlate : 33 possible sky positions to use as objects from a possible 708. plFiberPlate : 29 possible sky positions to use as objects from a possible 707. plFiberPlate : 24 possible sky positions to use as objects from a possible 706. plFiberPlate : 20 possible sky positions to use as objects from a possible 705. plFiberPlate : 20 possible sky positions to use as objects from a possible 704. plFiberPlate : 22 possible sky positions to use as objects from a possible 703. plFiberPlate : 58 possible sky positions to use as objects from a possible 702. plFiberPlate : 57 possible sky positions to use as objects from a possible 701. plFiberPlate : 26 possible sky positions to use as objects from a possible 700. plFiberPlate : 23 possible sky positions to use as objects from a possible 699. plFiberPlate : 11 possible sky positions to use as objects from a possible 698. plFiberPlate : 21 possible sky positions to use as objects from a possible 697. plFiberPlate : 25 possible sky positions to use as objects from a possible 696. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 739 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2185.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2186.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2186.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2187.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 454 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 638 to list of science objects plFiberPlate : adding sky number 430 to list of science objects plFiberPlate : adding sky number 559 to list of science objects plFiberPlate : adding sky number 444 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 777 to list of science objects plFiberPlate : adding sky number 775 to list of science objects plFiberPlate : adding sky number 599 to list of science objects plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : adding sky number 612 to list of science objects plFiberPlate : adding sky number 530 to list of science objects plFiberPlate : adding sky number 293 to list of science objects plFiberPlate : adding sky number 568 to list of science objects plFiberPlate : adding sky number 137 to list of science objects plFiberPlate : adding sky number 363 to list of science objects plFiberPlate : adding sky number 725 to list of science objects plFiberPlate : adding sky number 682 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 187 to list of science objects plFiberPlate : adding sky number 732 to list of science objects plFiberPlate : adding sky number 286 to list of science objects plFiberPlate : adding sky number 561 to list of science objects plFiberPlate : adding sky number 781 to list of science objects plFiberPlate : adding sky number 480 to list of science objects plFiberPlate : adding sky number 535 to list of science objects plFiberPlate : adding sky number 698 to list of science objects plFiberPlate : adding sky number 357 to list of science objects plFiberPlate : adding sky number 750 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 169 2 18 133 3 10 118 4 15 133 5 21 172 6 14 139 7 11 116 8 26 125 9 15 164 10 30 238 11 31 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2206 40 3 154 83 plFiberPlate : adding spectro-photo std with objId = 2206 40 2 152 55 plFiberPlate : adding spectro-photo std with objId = 2206 40 3 146 116 plFiberPlate : adding spectro-photo std with objId = 2206 40 2 145 76 plFiberPlate : adding spectro-photo std with objId = 2206 40 6 142 69 plFiberPlate : adding spectro-photo std with objId = 2206 40 3 142 4 plFiberPlate : adding spectro-photo std with objId = 2206 40 2 142 11 plFiberPlate : adding spectro-photo std with objId = 2206 40 6 140 57 plFiberPlate : 154 possible sky positions to use as objects from a possible 811. plFiberPlate : 94 possible sky positions to use as objects from a possible 810. plFiberPlate : 46 possible sky positions to use as objects from a possible 809. plFiberPlate : 32 possible sky positions to use as objects from a possible 808. plFiberPlate : 35 possible sky positions to use as objects from a possible 807. plFiberPlate : 54 possible sky positions to use as objects from a possible 806. plFiberPlate : 59 possible sky positions to use as objects from a possible 805. plFiberPlate : 85 possible sky positions to use as objects from a possible 804. plFiberPlate : 88 possible sky positions to use as objects from a possible 803. plFiberPlate : 66 possible sky positions to use as objects from a possible 802. plFiberPlate : 45 possible sky positions to use as objects from a possible 801. plFiberPlate : 24 possible sky positions to use as objects from a possible 800. plFiberPlate : 21 possible sky positions to use as objects from a possible 799. plFiberPlate : 32 possible sky positions to use as objects from a possible 798. plFiberPlate : 25 possible sky positions to use as objects from a possible 797. plFiberPlate : 20 possible sky positions to use as objects from a possible 796. plFiberPlate : 101 possible sky positions to use as objects from a possible 795. plFiberPlate : 68 possible sky positions to use as objects from a possible 794. plFiberPlate : 67 possible sky positions to use as objects from a possible 793. plFiberPlate : 44 possible sky positions to use as objects from a possible 792. plFiberPlate : 24 possible sky positions to use as objects from a possible 791. plFiberPlate : 12 possible sky positions to use as objects from a possible 790. plFiberPlate : 13 possible sky positions to use as objects from a possible 789. plFiberPlate : 21 possible sky positions to use as objects from a possible 788. plFiberPlate : 28 possible sky positions to use as objects from a possible 787. plFiberPlate : 70 possible sky positions to use as objects from a possible 786. plFiberPlate : 46 possible sky positions to use as objects from a possible 785. plFiberPlate : 42 possible sky positions to use as objects from a possible 784. plFiberPlate : 26 possible sky positions to use as objects from a possible 783. plFiberPlate : 26 possible sky positions to use as objects from a possible 782. plFiberPlate : 16 possible sky positions to use as objects from a possible 781. plFiberPlate : 20 possible sky positions to use as objects from a possible 780. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 768 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2186.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2187.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2187.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2188.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 329 to list of science objects plFiberPlate : adding sky number 672 to list of science objects plFiberPlate : adding sky number 563 to list of science objects plFiberPlate : adding sky number 749 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 779 to list of science objects plFiberPlate : adding sky number 753 to list of science objects plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 523 to list of science objects plFiberPlate : adding sky number 352 to list of science objects plFiberPlate : adding sky number 504 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 638 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 362 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 222 to list of science objects plFiberPlate : adding sky number 448 to list of science objects plFiberPlate : adding sky number 335 to list of science objects plFiberPlate : adding sky number 136 to list of science objects plFiberPlate : adding sky number 728 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 607 to list of science objects plFiberPlate : adding sky number 785 to list of science objects plFiberPlate : adding sky number 745 to list of science objects plFiberPlate : adding sky number 544 to list of science objects plFiberPlate : adding sky number 304 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 175 2 25 129 3 24 97 4 32 135 5 17 174 6 11 131 7 20 89 8 22 142 9 20 161 10 36 220 11 28 157 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 390 50 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 389 53 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 389 15 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 388 68 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 388 108 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 388 102 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 387 93 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 387 91 plFiberPlate : 148 possible sky positions to use as objects from a possible 794. plFiberPlate : 101 possible sky positions to use as objects from a possible 793. plFiberPlate : 61 possible sky positions to use as objects from a possible 792. plFiberPlate : 42 possible sky positions to use as objects from a possible 791. plFiberPlate : 31 possible sky positions to use as objects from a possible 790. plFiberPlate : 41 possible sky positions to use as objects from a possible 789. plFiberPlate : 77 possible sky positions to use as objects from a possible 788. plFiberPlate : 102 possible sky positions to use as objects from a possible 787. plFiberPlate : 80 possible sky positions to use as objects from a possible 786. plFiberPlate : 66 possible sky positions to use as objects from a possible 785. plFiberPlate : 51 possible sky positions to use as objects from a possible 784. plFiberPlate : 20 possible sky positions to use as objects from a possible 783. plFiberPlate : 21 possible sky positions to use as objects from a possible 782. plFiberPlate : 22 possible sky positions to use as objects from a possible 781. plFiberPlate : 31 possible sky positions to use as objects from a possible 780. plFiberPlate : 31 possible sky positions to use as objects from a possible 779. plFiberPlate : 105 possible sky positions to use as objects from a possible 778. plFiberPlate : 74 possible sky positions to use as objects from a possible 777. plFiberPlate : 45 possible sky positions to use as objects from a possible 776. plFiberPlate : 24 possible sky positions to use as objects from a possible 775. plFiberPlate : 21 possible sky positions to use as objects from a possible 774. plFiberPlate : 22 possible sky positions to use as objects from a possible 773. plFiberPlate : 21 possible sky positions to use as objects from a possible 772. plFiberPlate : 24 possible sky positions to use as objects from a possible 771. plFiberPlate : 18 possible sky positions to use as objects from a possible 770. plFiberPlate : 87 possible sky positions to use as objects from a possible 769. plFiberPlate : 54 possible sky positions to use as objects from a possible 768. plFiberPlate : 30 possible sky positions to use as objects from a possible 767. plFiberPlate : 18 possible sky positions to use as objects from a possible 766. plFiberPlate : 12 possible sky positions to use as objects from a possible 765. plFiberPlate : 14 possible sky positions to use as objects from a possible 764. plFiberPlate : 13 possible sky positions to use as objects from a possible 763. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 741 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2187.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2188.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2188.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2189.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 559 to list of science objects plFiberPlate : adding sky number 274 to list of science objects plFiberPlate : adding sky number 218 to list of science objects plFiberPlate : adding sky number 172 to list of science objects plFiberPlate : adding sky number 433 to list of science objects plFiberPlate : adding sky number 181 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 541 to list of science objects plFiberPlate : adding sky number 92 to list of science objects plFiberPlate : adding sky number 584 to list of science objects plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 547 to list of science objects plFiberPlate : adding sky number 54 to list of science objects plFiberPlate : adding sky number 696 to list of science objects plFiberPlate : adding sky number 38 to list of science objects plFiberPlate : adding sky number 381 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 580 to list of science objects plFiberPlate : adding sky number 532 to list of science objects plFiberPlate : adding sky number 476 to list of science objects plFiberPlate : adding sky number 701 to list of science objects plFiberPlate : adding sky number 462 to list of science objects plFiberPlate : adding sky number 549 to list of science objects plFiberPlate : adding sky number 67 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 374 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 146 to list of science objects plFiberPlate : adding sky number 330 to list of science objects plFiberPlate : adding sky number 586 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 37 142 2 30 98 3 30 90 4 39 128 5 24 171 6 15 118 7 16 96 8 10 140 9 14 155 10 49 188 11 35 129 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2391 40 1 233 52 plFiberPlate : adding spectro-photo std with objId = 2391 40 1 231 226 plFiberPlate : adding spectro-photo std with objId = 2391 40 4 230 67 plFiberPlate : adding spectro-photo std with objId = 2391 40 6 229 105 plFiberPlate : adding spectro-photo std with objId = 2391 40 2 229 14 plFiberPlate : adding spectro-photo std with objId = 2391 40 4 228 130 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 227 195 plFiberPlate : adding spectro-photo std with objId = 2391 40 3 227 236 plFiberPlate : 138 possible sky positions to use as objects from a possible 714. plFiberPlate : 88 possible sky positions to use as objects from a possible 713. plFiberPlate : 42 possible sky positions to use as objects from a possible 712. plFiberPlate : 36 possible sky positions to use as objects from a possible 711. plFiberPlate : 28 possible sky positions to use as objects from a possible 710. plFiberPlate : 27 possible sky positions to use as objects from a possible 709. plFiberPlate : 45 possible sky positions to use as objects from a possible 708. plFiberPlate : 77 possible sky positions to use as objects from a possible 707. plFiberPlate : 65 possible sky positions to use as objects from a possible 706. plFiberPlate : 56 possible sky positions to use as objects from a possible 705. plFiberPlate : 32 possible sky positions to use as objects from a possible 704. plFiberPlate : 18 possible sky positions to use as objects from a possible 703. plFiberPlate : 37 possible sky positions to use as objects from a possible 702. plFiberPlate : 14 possible sky positions to use as objects from a possible 701. plFiberPlate : 18 possible sky positions to use as objects from a possible 700. plFiberPlate : 16 possible sky positions to use as objects from a possible 699. plFiberPlate : 104 possible sky positions to use as objects from a possible 698. plFiberPlate : 79 possible sky positions to use as objects from a possible 697. plFiberPlate : 58 possible sky positions to use as objects from a possible 696. plFiberPlate : 40 possible sky positions to use as objects from a possible 695. plFiberPlate : 22 possible sky positions to use as objects from a possible 694. plFiberPlate : 17 possible sky positions to use as objects from a possible 693. plFiberPlate : 28 possible sky positions to use as objects from a possible 692. plFiberPlate : 21 possible sky positions to use as objects from a possible 691. plFiberPlate : 28 possible sky positions to use as objects from a possible 690. plFiberPlate : 90 possible sky positions to use as objects from a possible 689. plFiberPlate : 75 possible sky positions to use as objects from a possible 688. plFiberPlate : 38 possible sky positions to use as objects from a possible 687. plFiberPlate : 17 possible sky positions to use as objects from a possible 686. plFiberPlate : 12 possible sky positions to use as objects from a possible 685. plFiberPlate : 22 possible sky positions to use as objects from a possible 684. plFiberPlate : 30 possible sky positions to use as objects from a possible 683. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 736 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2188.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2189.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2189.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2190.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 391 to list of science objects plFiberPlate : adding sky number 515 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 107 to list of science objects plFiberPlate : adding sky number 678 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 602 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 585 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 618 to list of science objects plFiberPlate : adding sky number 397 to list of science objects plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 108 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 607 to list of science objects plFiberPlate : adding sky number 544 to list of science objects plFiberPlate : adding sky number 238 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 383 to list of science objects plFiberPlate : adding sky number 298 to list of science objects plFiberPlate : adding sky number 452 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 348 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 199 to list of science objects plFiberPlate : adding sky number 648 to list of science objects plFiberPlate : adding sky number 376 to list of science objects plFiberPlate : adding sky number 572 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 80 132 2 71 107 3 54 77 4 62 96 5 60 141 6 39 118 7 41 90 8 55 114 9 58 147 10 105 173 11 74 131 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 74 115 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 72 343 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 71 56 plFiberPlate : adding spectro-photo std with objId = 4144 40 3 70 38 plFiberPlate : adding spectro-photo std with objId = 4144 40 6 69 366 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 69 448 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 69 224 plFiberPlate : adding spectro-photo std with objId = 4144 40 5 68 374 plFiberPlate : 114 possible sky positions to use as objects from a possible 651. plFiberPlate : 63 possible sky positions to use as objects from a possible 650. plFiberPlate : 47 possible sky positions to use as objects from a possible 649. plFiberPlate : 41 possible sky positions to use as objects from a possible 648. plFiberPlate : 15 possible sky positions to use as objects from a possible 647. plFiberPlate : 31 possible sky positions to use as objects from a possible 646. plFiberPlate : 45 possible sky positions to use as objects from a possible 645. plFiberPlate : 75 possible sky positions to use as objects from a possible 644. plFiberPlate : 49 possible sky positions to use as objects from a possible 643. plFiberPlate : 39 possible sky positions to use as objects from a possible 642. plFiberPlate : 28 possible sky positions to use as objects from a possible 641. plFiberPlate : 16 possible sky positions to use as objects from a possible 640. plFiberPlate : 5 possible sky positions to use as objects from a possible 639. plFiberPlate : 20 possible sky positions to use as objects from a possible 638. plFiberPlate : 18 possible sky positions to use as objects from a possible 637. plFiberPlate : 19 possible sky positions to use as objects from a possible 636. plFiberPlate : 79 possible sky positions to use as objects from a possible 635. plFiberPlate : 67 possible sky positions to use as objects from a possible 634. plFiberPlate : 44 possible sky positions to use as objects from a possible 633. plFiberPlate : 28 possible sky positions to use as objects from a possible 632. plFiberPlate : 28 possible sky positions to use as objects from a possible 631. plFiberPlate : 6 possible sky positions to use as objects from a possible 630. plFiberPlate : 23 possible sky positions to use as objects from a possible 629. plFiberPlate : 12 possible sky positions to use as objects from a possible 628. plFiberPlate : 13 possible sky positions to use as objects from a possible 627. plFiberPlate : 57 possible sky positions to use as objects from a possible 626. plFiberPlate : 64 possible sky positions to use as objects from a possible 625. plFiberPlate : 48 possible sky positions to use as objects from a possible 624. plFiberPlate : 42 possible sky positions to use as objects from a possible 623. plFiberPlate : 25 possible sky positions to use as objects from a possible 622. plFiberPlate : 26 possible sky positions to use as objects from a possible 621. plFiberPlate : 24 possible sky positions to use as objects from a possible 620. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 799 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2189.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2190.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2190.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2191.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 557 to list of science objects plFiberPlate : adding sky number 467 to list of science objects plFiberPlate : adding sky number 26 to list of science objects plFiberPlate : adding sky number 554 to list of science objects plFiberPlate : adding sky number 617 to list of science objects plFiberPlate : adding sky number 684 to list of science objects plFiberPlate : adding sky number 645 to list of science objects plFiberPlate : adding sky number 613 to list of science objects plFiberPlate : adding sky number 721 to list of science objects plFiberPlate : adding sky number 547 to list of science objects plFiberPlate : adding sky number 663 to list of science objects plFiberPlate : adding sky number 721 to list of science objects plFiberPlate : adding sky number 488 to list of science objects plFiberPlate : adding sky number 363 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 605 to list of science objects plFiberPlate : adding sky number 648 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 472 to list of science objects plFiberPlate : adding sky number 180 to list of science objects plFiberPlate : adding sky number 456 to list of science objects plFiberPlate : adding sky number 165 to list of science objects plFiberPlate : adding sky number 506 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 237 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 454 to list of science objects plFiberPlate : adding sky number 160 to list of science objects plFiberPlate : adding sky number 466 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 693 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 148 2 43 111 3 30 92 4 44 106 5 43 160 6 21 132 7 14 109 8 19 115 9 23 169 10 60 205 11 42 129 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 172 209 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 172 171 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 170 106 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 168 235 plFiberPlate : adding spectro-photo std with objId = 3958 40 2 166 239 plFiberPlate : adding spectro-photo std with objId = 3958 40 2 166 26 plFiberPlate : adding spectro-photo std with objId = 3958 40 5 164 134 plFiberPlate : adding spectro-photo std with objId = 3958 40 3 164 36 plFiberPlate : 116 possible sky positions to use as objects from a possible 713. plFiberPlate : 93 possible sky positions to use as objects from a possible 712. plFiberPlate : 32 possible sky positions to use as objects from a possible 711. plFiberPlate : 29 possible sky positions to use as objects from a possible 710. plFiberPlate : 51 possible sky positions to use as objects from a possible 709. plFiberPlate : 27 possible sky positions to use as objects from a possible 708. plFiberPlate : 38 possible sky positions to use as objects from a possible 707. plFiberPlate : 103 possible sky positions to use as objects from a possible 706. plFiberPlate : 78 possible sky positions to use as objects from a possible 705. plFiberPlate : 53 possible sky positions to use as objects from a possible 704. plFiberPlate : 30 possible sky positions to use as objects from a possible 703. plFiberPlate : 19 possible sky positions to use as objects from a possible 702. plFiberPlate : 25 possible sky positions to use as objects from a possible 701. plFiberPlate : 17 possible sky positions to use as objects from a possible 700. plFiberPlate : 18 possible sky positions to use as objects from a possible 699. plFiberPlate : 18 possible sky positions to use as objects from a possible 698. plFiberPlate : 80 possible sky positions to use as objects from a possible 697. plFiberPlate : 66 possible sky positions to use as objects from a possible 696. plFiberPlate : 46 possible sky positions to use as objects from a possible 695. plFiberPlate : 29 possible sky positions to use as objects from a possible 694. plFiberPlate : 16 possible sky positions to use as objects from a possible 693. plFiberPlate : 21 possible sky positions to use as objects from a possible 692. plFiberPlate : 14 possible sky positions to use as objects from a possible 691. plFiberPlate : 19 possible sky positions to use as objects from a possible 690. plFiberPlate : 21 possible sky positions to use as objects from a possible 689. plFiberPlate : 73 possible sky positions to use as objects from a possible 688. plFiberPlate : 64 possible sky positions to use as objects from a possible 687. plFiberPlate : 34 possible sky positions to use as objects from a possible 686. plFiberPlate : 37 possible sky positions to use as objects from a possible 685. plFiberPlate : 22 possible sky positions to use as objects from a possible 684. plFiberPlate : 16 possible sky positions to use as objects from a possible 683. plFiberPlate : 17 possible sky positions to use as objects from a possible 682. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 749 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2190.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2191.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2191.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2192.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 427 to list of science objects plFiberPlate : adding sky number 561 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 367 to list of science objects plFiberPlate : adding sky number 460 to list of science objects plFiberPlate : adding sky number 733 to list of science objects plFiberPlate : adding sky number 349 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 656 to list of science objects plFiberPlate : adding sky number 335 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 265 to list of science objects plFiberPlate : adding sky number 460 to list of science objects plFiberPlate : adding sky number 640 to list of science objects plFiberPlate : adding sky number 179 to list of science objects plFiberPlate : adding sky number 518 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 368 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 543 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 473 to list of science objects plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 314 to list of science objects plFiberPlate : adding sky number 527 to list of science objects plFiberPlate : adding sky number 510 to list of science objects plFiberPlate : adding sky number 482 to list of science objects plFiberPlate : adding sky number 262 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 458 to list of science objects plFiberPlate : adding sky number 471 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 161 2 21 125 3 28 102 4 29 117 5 29 157 6 20 128 7 18 114 8 19 121 9 16 160 10 44 207 11 22 154 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2207 40 2 108 100 plFiberPlate : adding spectro-photo std with objId = 2207 40 1 105 99 plFiberPlate : adding spectro-photo std with objId = 2207 40 2 101 191 plFiberPlate : adding spectro-photo std with objId = 2207 40 1 101 123 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 99 98 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 98 254 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 95 168 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 95 132 plFiberPlate : 117 possible sky positions to use as objects from a possible 751. plFiberPlate : 80 possible sky positions to use as objects from a possible 750. plFiberPlate : 52 possible sky positions to use as objects from a possible 749. plFiberPlate : 36 possible sky positions to use as objects from a possible 748. plFiberPlate : 46 possible sky positions to use as objects from a possible 747. plFiberPlate : 40 possible sky positions to use as objects from a possible 746. plFiberPlate : 36 possible sky positions to use as objects from a possible 745. plFiberPlate : 93 possible sky positions to use as objects from a possible 744. plFiberPlate : 63 possible sky positions to use as objects from a possible 743. plFiberPlate : 33 possible sky positions to use as objects from a possible 742. plFiberPlate : 27 possible sky positions to use as objects from a possible 741. plFiberPlate : 9 possible sky positions to use as objects from a possible 740. plFiberPlate : 27 possible sky positions to use as objects from a possible 739. plFiberPlate : 14 possible sky positions to use as objects from a possible 738. plFiberPlate : 21 possible sky positions to use as objects from a possible 737. plFiberPlate : 20 possible sky positions to use as objects from a possible 736. plFiberPlate : 104 possible sky positions to use as objects from a possible 735. plFiberPlate : 73 possible sky positions to use as objects from a possible 734. plFiberPlate : 51 possible sky positions to use as objects from a possible 733. plFiberPlate : 31 possible sky positions to use as objects from a possible 732. plFiberPlate : 21 possible sky positions to use as objects from a possible 731. plFiberPlate : 36 possible sky positions to use as objects from a possible 730. plFiberPlate : 16 possible sky positions to use as objects from a possible 729. plFiberPlate : 13 possible sky positions to use as objects from a possible 728. plFiberPlate : 28 possible sky positions to use as objects from a possible 727. plFiberPlate : 63 possible sky positions to use as objects from a possible 726. plFiberPlate : 38 possible sky positions to use as objects from a possible 725. plFiberPlate : 35 possible sky positions to use as objects from a possible 724. plFiberPlate : 20 possible sky positions to use as objects from a possible 723. plFiberPlate : 21 possible sky positions to use as objects from a possible 722. plFiberPlate : 17 possible sky positions to use as objects from a possible 721. plFiberPlate : 18 possible sky positions to use as objects from a possible 720. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 742 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2191.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2192.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2192.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2193.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 390 to list of science objects plFiberPlate : adding sky number 106 to list of science objects plFiberPlate : adding sky number 484 to list of science objects plFiberPlate : adding sky number 359 to list of science objects plFiberPlate : adding sky number 342 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 277 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 455 to list of science objects plFiberPlate : adding sky number 355 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : adding sky number 304 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 147 to list of science objects plFiberPlate : adding sky number 395 to list of science objects plFiberPlate : adding sky number 146 to list of science objects plFiberPlate : adding sky number 167 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 498 to list of science objects plFiberPlate : adding sky number 1 to list of science objects plFiberPlate : adding sky number 417 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 218 to list of science objects plFiberPlate : adding sky number 479 to list of science objects plFiberPlate : adding sky number 458 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 48 100 2 43 77 3 32 75 4 49 95 5 24 101 6 28 85 7 30 78 8 29 99 9 35 94 10 70 130 11 52 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 66 224 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 64 212 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 61 72 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 61 379 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 61 136 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 60 49 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 60 55 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 60 16 plFiberPlate : 99 possible sky positions to use as objects from a possible 498. plFiberPlate : 60 possible sky positions to use as objects from a possible 497. plFiberPlate : 29 possible sky positions to use as objects from a possible 496. plFiberPlate : 17 possible sky positions to use as objects from a possible 495. plFiberPlate : 32 possible sky positions to use as objects from a possible 494. plFiberPlate : 33 possible sky positions to use as objects from a possible 493. plFiberPlate : 27 possible sky positions to use as objects from a possible 492. plFiberPlate : 57 possible sky positions to use as objects from a possible 491. plFiberPlate : 39 possible sky positions to use as objects from a possible 490. plFiberPlate : 24 possible sky positions to use as objects from a possible 489. plFiberPlate : 11 possible sky positions to use as objects from a possible 488. plFiberPlate : 4 possible sky positions to use as objects from a possible 487. plFiberPlate : 5 possible sky positions to use as objects from a possible 486. plFiberPlate : 19 possible sky positions to use as objects from a possible 485. plFiberPlate : 6 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 60 possible sky positions to use as objects from a possible 482. plFiberPlate : 38 possible sky positions to use as objects from a possible 481. plFiberPlate : 30 possible sky positions to use as objects from a possible 480. plFiberPlate : 11 possible sky positions to use as objects from a possible 479. plFiberPlate : 9 possible sky positions to use as objects from a possible 478. plFiberPlate : 9 possible sky positions to use as objects from a possible 477. plFiberPlate : 13 possible sky positions to use as objects from a possible 476. plFiberPlate : 18 possible sky positions to use as objects from a possible 475. plFiberPlate : 16 possible sky positions to use as objects from a possible 474. plFiberPlate : 45 possible sky positions to use as objects from a possible 473. plFiberPlate : 38 possible sky positions to use as objects from a possible 472. plFiberPlate : 30 possible sky positions to use as objects from a possible 471. plFiberPlate : 20 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 18 possible sky positions to use as objects from a possible 467. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 771 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2192.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2193.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2193.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2194.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 206 to list of science objects plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 205 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : adding sky number 240 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 206 to list of science objects plFiberPlate : adding sky number 141 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 222 to list of science objects plFiberPlate : adding sky number 126 to list of science objects plFiberPlate : adding sky number 145 to list of science objects plFiberPlate : adding sky number 41 to list of science objects plFiberPlate : adding sky number 68 to list of science objects plFiberPlate : adding sky number 216 to list of science objects plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 209 to list of science objects plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : adding sky number 71 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 176 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 117 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 50 41 2 51 30 3 41 30 4 56 51 5 55 50 6 36 42 7 31 34 8 33 37 9 38 57 10 75 65 11 49 43 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 97 485 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 97 376 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 95 484 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 93 383 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 93 132 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 93 275 plFiberPlate : adding spectro-photo std with objId = 4832 40 4 92 150 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 92 440 plFiberPlate : 49 possible sky positions to use as objects from a possible 238. plFiberPlate : 25 possible sky positions to use as objects from a possible 237. plFiberPlate : 11 possible sky positions to use as objects from a possible 236. plFiberPlate : 7 possible sky positions to use as objects from a possible 235. plFiberPlate : 14 possible sky positions to use as objects from a possible 234. plFiberPlate : 10 possible sky positions to use as objects from a possible 233. plFiberPlate : 18 possible sky positions to use as objects from a possible 232. plFiberPlate : 35 possible sky positions to use as objects from a possible 231. plFiberPlate : 29 possible sky positions to use as objects from a possible 230. plFiberPlate : 17 possible sky positions to use as objects from a possible 229. plFiberPlate : 10 possible sky positions to use as objects from a possible 228. plFiberPlate : 10 possible sky positions to use as objects from a possible 227. plFiberPlate : 6 possible sky positions to use as objects from a possible 226. plFiberPlate : 5 possible sky positions to use as objects from a possible 225. plFiberPlate : 9 possible sky positions to use as objects from a possible 224. plFiberPlate : 3 possible sky positions to use as objects from a possible 223. plFiberPlate : 34 possible sky positions to use as objects from a possible 222. plFiberPlate : 29 possible sky positions to use as objects from a possible 221. plFiberPlate : 14 possible sky positions to use as objects from a possible 220. plFiberPlate : 12 possible sky positions to use as objects from a possible 219. plFiberPlate : 13 possible sky positions to use as objects from a possible 218. plFiberPlate : 7 possible sky positions to use as objects from a possible 217. plFiberPlate : 2 possible sky positions to use as objects from a possible 216. plFiberPlate : 4 possible sky positions to use as objects from a possible 215. plFiberPlate : 7 possible sky positions to use as objects from a possible 214. plFiberPlate : 26 possible sky positions to use as objects from a possible 213. plFiberPlate : 18 possible sky positions to use as objects from a possible 212. plFiberPlate : 6 possible sky positions to use as objects from a possible 211. plFiberPlate : 6 possible sky positions to use as objects from a possible 210. plFiberPlate : 10 possible sky positions to use as objects from a possible 209. plFiberPlate : 7 possible sky positions to use as objects from a possible 208. plFiberPlate : 7 possible sky positions to use as objects from a possible 207. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 791 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2193.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2194.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2194.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapP-2195.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 23 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 17 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 40 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 46 to list of science objects plFiberPlate : adding sky number 77 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 17 to list of science objects plFiberPlate : adding sky number 8 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 71 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 100 10 2 77 8 3 42 17 4 67 20 5 66 26 6 57 22 7 51 17 8 67 18 9 68 19 10 116 28 11 101 13 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 133 164 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 129 491 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 127 495 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 127 231 plFiberPlate : adding spectro-photo std with objId = 4832 40 4 126 412 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 126 768 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 126 599 plFiberPlate : adding spectro-photo std with objId = 4832 40 4 125 519 plFiberPlate : 17 possible sky positions to use as objects from a possible 102. plFiberPlate : 11 possible sky positions to use as objects from a possible 101. plFiberPlate : 1 possible sky positions to use as objects from a possible 100. plFiberPlate : 5 possible sky positions to use as objects from a possible 99. plFiberPlate : 2 possible sky positions to use as objects from a possible 98. plFiberPlate : 2 possible sky positions to use as objects from a possible 97. plFiberPlate : 1 possible sky positions to use as objects from a possible 96. plFiberPlate : 7 possible sky positions to use as objects from a possible 95. plFiberPlate : 4 possible sky positions to use as objects from a possible 94. plFiberPlate : 3 possible sky positions to use as objects from a possible 93. plFiberPlate : 1 possible sky positions to use as objects from a possible 92. plFiberPlate : 0 possible sky positions to use as objects from a possible 91. plFiberPlate: No sky found for bundle at 4.254 -69.419, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 91. plFiberPlate : 3 possible sky positions to use as objects from a possible 90. plFiberPlate : 3 possible sky positions to use as objects from a possible 89. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 194.867 -74.430, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 194.867 -74.430, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 194.867 -74.430, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 88. plFiberPlate : 1 possible sky positions to use as objects from a possible 87. plFiberPlate : 16 possible sky positions to use as objects from a possible 86. plFiberPlate : 16 possible sky positions to use as objects from a possible 85. plFiberPlate : 8 possible sky positions to use as objects from a possible 84. plFiberPlate : 7 possible sky positions to use as objects from a possible 83. plFiberPlate : 1 possible sky positions to use as objects from a possible 82. plFiberPlate : 4 possible sky positions to use as objects from a possible 81. plFiberPlate : 4 possible sky positions to use as objects from a possible 80. plFiberPlate : 2 possible sky positions to use as objects from a possible 79. plFiberPlate : 2 possible sky positions to use as objects from a possible 78. plFiberPlate : 9 possible sky positions to use as objects from a possible 77. plFiberPlate : 14 possible sky positions to use as objects from a possible 76. plFiberPlate : 6 possible sky positions to use as objects from a possible 75. plFiberPlate : 2 possible sky positions to use as objects from a possible 74. plFiberPlate : 1 possible sky positions to use as objects from a possible 73. plFiberPlate : 3 possible sky positions to use as objects from a possible 72. plFiberPlate : 4 possible sky positions to use as objects from a possible 71. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 842 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2194.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2195.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.4/plOverlay-2195.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sun Apr 24 19:42:37 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 11 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2185.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2185.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2185.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 77 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2186.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2186.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2186.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 106 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2187.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2187.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.0782,9.4716) and (4.07,11.61) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2187.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 79 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2188.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2188.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2188.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 74 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2189.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2189.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.2969,11.2440) and (-2.28,12.13) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2189.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 137 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2190.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.8572,-6.4154) and (11.65,-4.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2190.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2190.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 87 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2191.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2191.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.5530,9.7303) and (-11.78,3.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2191.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 80 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2192.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2192.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2192.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 109 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2193.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2193.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2193.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 129 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2194.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2194.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2194.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 180 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2195.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2195.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.4/plFanuc-2195.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sun Apr 24 19:43:13 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa604c1c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 11 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2185 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2186 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 739 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2187 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 768 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2188 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 741 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2189 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 736 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2190 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 799 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2191 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 749 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2192 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 742 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2193 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 771 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2194 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 791 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2195 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 842 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sun Apr 24 19:43:33 CDT 2005 Begin running "plateEnder dr2005.04.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.04.4 -morePipes 1" failed. PS: Read file for stderr output of this job. Sender: LSF System Subject: Job 43059: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Apr 25 11:24:24 2005 Results reported at Mon Apr 25 11:27:51 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.04.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 19.85 sec. Max Memory : 4 MB Max Swap : 16 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Mon Apr 25 11:25:22 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Apr 25 11:27:17 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_221/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Mon Apr 25 11:27:18 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_221/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Mon Apr 25 11:27:23 CDT 2005 Begin running plate --------------------------------------------------------------- Mon Apr 25 11:27:25 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9f4d264 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8057.par makePlates : plateInfo struct for plate 2185 : (h4).mjd 53519 (h4).raCen 250.007 (h4).decCen 36.197 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.007 36.197 250.007 37.697 plMakePlateFromTile : mjd of obs : 53519.807874 Observed HA/dec of plate center, fiducial point (deg) : 33.998 36.185 33.998 37.684 The rotation angle of the fid. point is -86.922959 plMakePlateFromTile : beginning loop over 1669 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8058.par makePlates : plateInfo struct for plate 2186 : (h4).mjd 53519 (h4).raCen 241.40545 (h4).decCen 5.57236 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.405 5.572 241.405 7.072 plMakePlateFromTile : mjd of obs : 53519.767461 Observed HA/dec of plate center, fiducial point (deg) : 27.998 5.565 27.998 7.065 The rotation angle of the fid. point is -40.238578 plMakePlateFromTile : beginning loop over 1617 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8059.par makePlates : plateInfo struct for plate 2187 : (h4).mjd 53519 (h4).raCen 242.50726 (h4).decCen 52.36524 (h4).haCen 42 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.507 52.365 242.507 53.865 plMakePlateFromTile : mjd of obs : 53519.809252 Observed HA/dec of plate center, fiducial point (deg) : 41.998 52.346 41.999 53.846 The rotation angle of the fid. point is -106.264308 plMakePlateFromTile : beginning loop over 1663 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8060.par makePlates : plateInfo struct for plate 2188 : (h4).mjd 53519 (h4).raCen 243.76748 (h4).decCen 16.66577 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.767 16.666 243.767 18.166 plMakePlateFromTile : mjd of obs : 53519.768448 Observed HA/dec of plate center, fiducial point (deg) : 25.998 16.656 25.998 18.155 The rotation angle of the fid. point is -50.681913 plMakePlateFromTile : beginning loop over 1702 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8061.par makePlates : plateInfo struct for plate 2189 : (h4).mjd 53519 (h4).raCen 242.3285 (h4).decCen 4.0651 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.329 4.065 242.329 5.565 plMakePlateFromTile : mjd of obs : 53519.767249 Observed HA/dec of plate center, fiducial point (deg) : 26.998 4.059 26.998 5.558 The rotation angle of the fid. point is -38.112990 plMakePlateFromTile : beginning loop over 1657 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.4/plPlugMapT-8062.par struct PLUGMAPOBJ - length mismatch between typedef and input Offending line: PLUGMAPOBJ {4144 40 6 69 358} 308.926636 77.528709 22.204 19.992 18.756 18.251 17.935 1.0 0.0 0.0 SERENDIPITY_MANUAL 0.0 0.0 0 0 0 -2130706432 1073741824 Error: "makePlates -verbose=2" failed. PS: Read file for stderr output of this job.