Sender: LSF System Subject: Job 59081: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Sep 12 21:46:35 2005 Results reported at Mon Sep 12 21:48:50 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.09.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 90.81 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Sep 12 21:46:44 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Sep 12 21:46:59 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_22/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Mon Sep 12 21:46:59 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_22/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Mon Sep 12 21:47:00 CDT 2005 Begin running plate --------------------------------------------------------------- Mon Sep 12 21:47:00 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x93b4ddc makePlates : beginning loop over plObs chain; makePlates : making 10 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1657.par makePlates : plateInfo struct for plate 2289 : (h4).mjd 53762 (h4).raCen 141.7709 (h4).decCen 20.71127 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.771 20.711 141.771 22.211 plMakePlateFromTile : mjd of obs : 53762.689505 Observed HA/dec of plate center, fiducial point (deg) : -21.002 20.689 -21.003 22.188 The rotation angle of the fid. point is 52.768190 plMakePlateFromTile : beginning loop over 1369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1658.par makePlates : plateInfo struct for plate 2290 : (h4).mjd 53762 (h4).raCen 140.1675 (h4).decCen 22.02093 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.167 22.021 140.167 23.521 plMakePlateFromTile : mjd of obs : 53762.646270 Observed HA/dec of plate center, fiducial point (deg) : -35.002 22.000 -35.003 23.499 The rotation angle of the fid. point is 63.188822 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1659.par makePlates : plateInfo struct for plate 2291 : (h4).mjd 53762 (h4).raCen 140.0793 (h4).decCen 24.60474 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.079 24.605 140.079 26.105 plMakePlateFromTile : mjd of obs : 53762.646030 Observed HA/dec of plate center, fiducial point (deg) : -35.002 24.583 -35.003 26.082 The rotation angle of the fid. point is 66.912353 plMakePlateFromTile : beginning loop over 1349 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-149.31, -206.63, 8.2) and (-149.51, -206.95, 7.9) checkLTHo : distance = 0.384, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-149.31, -206.63, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1660.par makePlates : plateInfo struct for plate 2292 : (h4).mjd 53762 (h4).raCen 144.6372 (h4).decCen 21.48388 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.637 21.484 144.637 22.984 plMakePlateFromTile : mjd of obs : 53762.689131 Observed HA/dec of plate center, fiducial point (deg) : -24.002 21.460 -24.003 22.959 The rotation angle of the fid. point is 56.931539 plMakePlateFromTile : beginning loop over 1357 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1661.par makePlates : plateInfo struct for plate 2293 : (h4).mjd 53762 (h4).raCen 142.7548 (h4).decCen 23.29511 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.755 23.295 142.755 24.795 plMakePlateFromTile : mjd of obs : 53762.689462 Observed HA/dec of plate center, fiducial point (deg) : -22.002 23.271 -22.003 24.771 The rotation angle of the fid. point is 59.008619 plMakePlateFromTile : beginning loop over 1371 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1662.par makePlates : plateInfo struct for plate 2294 : (h4).mjd 53762 (h4).raCen 143.1403 (h4).decCen 25.57758 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.140 25.578 143.140 27.078 plMakePlateFromTile : mjd of obs : 53762.687762 Observed HA/dec of plate center, fiducial point (deg) : -23.002 25.553 -23.003 27.052 The rotation angle of the fid. point is 64.820302 plMakePlateFromTile : beginning loop over 1360 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1663.par makePlates : plateInfo struct for plate 2295 : (h4).mjd 53762 (h4).raCen 147.1418 (h4).decCen 22.2815 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.142 22.282 147.142 23.781 plMakePlateFromTile : mjd of obs : 53762.687756 Observed HA/dec of plate center, fiducial point (deg) : -27.002 22.256 -27.003 23.756 The rotation angle of the fid. point is 60.366355 plMakePlateFromTile : beginning loop over 1351 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1664.par makePlates : plateInfo struct for plate 2296 : (h4).mjd 53762 (h4).raCen 145.2227 (h4).decCen 24.14053 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.223 24.141 145.223 25.641 plMakePlateFromTile : mjd of obs : 53762.687985 Observed HA/dec of plate center, fiducial point (deg) : -25.002 24.116 -25.003 25.615 The rotation angle of the fid. point is 62.797266 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1665.par makePlates : plateInfo struct for plate 2297 : (h4).mjd 53762 (h4).raCen 145.6568 (h4).decCen 26.59815 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.657 26.598 145.657 28.098 plMakePlateFromTile : mjd of obs : 53762.689190 Observed HA/dec of plate center, fiducial point (deg) : -25.002 26.572 -25.003 28.072 The rotation angle of the fid. point is 68.051040 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1666.par makePlates : plateInfo struct for plate 2298 : (h4).mjd 53762 (h4).raCen 149.6165 (h4).decCen 23.01775 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.617 23.018 149.617 24.518 plMakePlateFromTile : mjd of obs : 53762.689068 Observed HA/dec of plate center, fiducial point (deg) : -29.002 22.992 -29.003 24.491 The rotation angle of the fid. point is 62.634032 plMakePlateFromTile : beginning loop over 1348 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Sep 12 21:47:20 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 10 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2289.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 116 2 14 102 3 9 100 4 23 94 5 17 124 6 15 95 7 10 100 8 15 107 9 15 99 10 22 147 11 23 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 184 56 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 190 39 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 189 2 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 219 108 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 186 41 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 183 37 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 220 52 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 177 159 plFiberPlate : 111 possible sky positions to use as objects from a possible 600. plFiberPlate : 95 possible sky positions to use as objects from a possible 599. plFiberPlate : 72 possible sky positions to use as objects from a possible 598. plFiberPlate : 43 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 46 possible sky positions to use as objects from a possible 595. plFiberPlate : 59 possible sky positions to use as objects from a possible 594. plFiberPlate : 49 possible sky positions to use as objects from a possible 593. plFiberPlate : 36 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 9 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 77 possible sky positions to use as objects from a possible 584. plFiberPlate : 47 possible sky positions to use as objects from a possible 583. plFiberPlate : 24 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 4 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 45 possible sky positions to use as objects from a possible 575. plFiberPlate : 36 possible sky positions to use as objects from a possible 574. plFiberPlate : 26 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 12 possible sky positions to use as objects from a possible 570. plFiberPlate : 14 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2289.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2289.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2290.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 128 2 14 103 3 12 98 4 17 111 5 8 125 6 13 93 7 15 89 8 18 96 9 9 101 10 22 159 11 17 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 169 67 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 183 37 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 177 159 plFiberPlate : adding spectro-photo std with objId = 5045 40 1 193 47 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 179 51 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 171 92 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 168 26 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 178 47 plFiberPlate : 135 possible sky positions to use as objects from a possible 607. plFiberPlate : 94 possible sky positions to use as objects from a possible 606. plFiberPlate : 45 possible sky positions to use as objects from a possible 605. plFiberPlate : 28 possible sky positions to use as objects from a possible 604. plFiberPlate : 35 possible sky positions to use as objects from a possible 603. plFiberPlate : 53 possible sky positions to use as objects from a possible 602. plFiberPlate : 35 possible sky positions to use as objects from a possible 601. plFiberPlate : 80 possible sky positions to use as objects from a possible 600. plFiberPlate : 31 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 7 possible sky positions to use as objects from a possible 593. plFiberPlate : 30 possible sky positions to use as objects from a possible 592. plFiberPlate : 58 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 19 possible sky positions to use as objects from a possible 588. plFiberPlate : 7 possible sky positions to use as objects from a possible 587. plFiberPlate : 2 possible sky positions to use as objects from a possible 586. plFiberPlate : 4 possible sky positions to use as objects from a possible 585. plFiberPlate : 2 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : 55 possible sky positions to use as objects from a possible 582. plFiberPlate : 44 possible sky positions to use as objects from a possible 581. plFiberPlate : 25 possible sky positions to use as objects from a possible 580. plFiberPlate : 35 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 8 possible sky positions to use as objects from a possible 577. plFiberPlate : 17 possible sky positions to use as objects from a possible 576. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2289.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2290.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2290.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2291.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 108 2 18 100 3 22 90 4 21 106 5 27 129 6 27 98 7 16 85 8 11 99 9 19 106 10 29 146 11 14 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 190 41 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 88 109 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 98 60 plFiberPlate : adding spectro-photo std with objId = 5038 40 3 100 84 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 191 81 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 200 85 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 94 62 plFiberPlate : adding spectro-photo std with objId = 5045 40 1 193 47 plFiberPlate : 118 possible sky positions to use as objects from a possible 594. plFiberPlate : 83 possible sky positions to use as objects from a possible 593. plFiberPlate : 47 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 23 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 51 possible sky positions to use as objects from a possible 588. plFiberPlate : 76 possible sky positions to use as objects from a possible 587. plFiberPlate : 54 possible sky positions to use as objects from a possible 586. plFiberPlate : 29 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 12 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 4 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 37 possible sky positions to use as objects from a possible 578. plFiberPlate : 37 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 16 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 3 possible sky positions to use as objects from a possible 573. plFiberPlate : 8 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 79 possible sky positions to use as objects from a possible 569. plFiberPlate : 31 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 4 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2290.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2291.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2291.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2292.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 135 2 10 116 3 6 100 4 10 109 5 16 120 6 13 95 7 9 86 8 13 107 9 10 110 10 16 166 11 9 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 201 126 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 228 23 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 208 50 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 215 73 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 214 43 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 204 10 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 208 14 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 237 62 plFiberPlate : 97 possible sky positions to use as objects from a possible 631. plFiberPlate : 94 possible sky positions to use as objects from a possible 630. plFiberPlate : 57 possible sky positions to use as objects from a possible 629. plFiberPlate : 32 possible sky positions to use as objects from a possible 628. plFiberPlate : 35 possible sky positions to use as objects from a possible 627. plFiberPlate : 52 possible sky positions to use as objects from a possible 626. plFiberPlate : 64 possible sky positions to use as objects from a possible 625. plFiberPlate : 69 possible sky positions to use as objects from a possible 624. plFiberPlate : 58 possible sky positions to use as objects from a possible 623. plFiberPlate : 36 possible sky positions to use as objects from a possible 622. plFiberPlate : 22 possible sky positions to use as objects from a possible 621. plFiberPlate : 14 possible sky positions to use as objects from a possible 620. plFiberPlate : 14 possible sky positions to use as objects from a possible 619. plFiberPlate : 5 possible sky positions to use as objects from a possible 618. plFiberPlate : 22 possible sky positions to use as objects from a possible 617. plFiberPlate : 16 possible sky positions to use as objects from a possible 616. plFiberPlate : 81 possible sky positions to use as objects from a possible 615. plFiberPlate : 58 possible sky positions to use as objects from a possible 614. plFiberPlate : 47 possible sky positions to use as objects from a possible 613. plFiberPlate : 24 possible sky positions to use as objects from a possible 612. plFiberPlate : 18 possible sky positions to use as objects from a possible 611. plFiberPlate : 18 possible sky positions to use as objects from a possible 610. plFiberPlate : 17 possible sky positions to use as objects from a possible 609. plFiberPlate : 17 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 26 possible sky positions to use as objects from a possible 606. plFiberPlate : 28 possible sky positions to use as objects from a possible 605. plFiberPlate : 9 possible sky positions to use as objects from a possible 604. plFiberPlate : 12 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 6 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2291.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2292.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2292.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2293.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 127 2 9 102 3 11 87 4 16 105 5 16 124 6 13 110 7 8 92 8 17 109 9 14 122 10 17 150 11 12 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 188 24 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 189 40 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 186 62 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 199 21 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 200 42 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 184 105 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 13 87 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 108 92 plFiberPlate : 120 possible sky positions to use as objects from a possible 618. plFiberPlate : 82 possible sky positions to use as objects from a possible 617. plFiberPlate : 52 possible sky positions to use as objects from a possible 616. plFiberPlate : 7 possible sky positions to use as objects from a possible 615. plFiberPlate : 16 possible sky positions to use as objects from a possible 614. plFiberPlate : 30 possible sky positions to use as objects from a possible 613. plFiberPlate : 69 possible sky positions to use as objects from a possible 612. plFiberPlate : 68 possible sky positions to use as objects from a possible 611. plFiberPlate : 47 possible sky positions to use as objects from a possible 610. plFiberPlate : 36 possible sky positions to use as objects from a possible 609. plFiberPlate : 29 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : 17 possible sky positions to use as objects from a possible 606. plFiberPlate : 25 possible sky positions to use as objects from a possible 605. plFiberPlate : 17 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 70 possible sky positions to use as objects from a possible 602. plFiberPlate : 49 possible sky positions to use as objects from a possible 601. plFiberPlate : 39 possible sky positions to use as objects from a possible 600. plFiberPlate : 29 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 15 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 63 possible sky positions to use as objects from a possible 593. plFiberPlate : 54 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 29 possible sky positions to use as objects from a possible 590. plFiberPlate : 33 possible sky positions to use as objects from a possible 589. plFiberPlate : 20 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2292.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2293.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2293.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2294.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 116 2 13 100 3 12 90 4 10 111 5 14 136 6 16 116 7 13 99 8 16 102 9 16 106 10 17 148 11 17 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 28 56 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 113 16 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 18 149 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 119 43 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 13 87 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 13 29 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 108 92 plFiberPlate : adding spectro-photo std with objId = 4632 40 3 23 31 plFiberPlate : 132 possible sky positions to use as objects from a possible 621. plFiberPlate : 74 possible sky positions to use as objects from a possible 620. plFiberPlate : 45 possible sky positions to use as objects from a possible 619. plFiberPlate : 31 possible sky positions to use as objects from a possible 618. plFiberPlate : 36 possible sky positions to use as objects from a possible 617. plFiberPlate : 18 possible sky positions to use as objects from a possible 616. plFiberPlate : 46 possible sky positions to use as objects from a possible 615. plFiberPlate : 79 possible sky positions to use as objects from a possible 614. plFiberPlate : 60 possible sky positions to use as objects from a possible 613. plFiberPlate : 39 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 11 possible sky positions to use as objects from a possible 609. plFiberPlate : 15 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 14 possible sky positions to use as objects from a possible 606. plFiberPlate : 52 possible sky positions to use as objects from a possible 605. plFiberPlate : 50 possible sky positions to use as objects from a possible 604. plFiberPlate : 29 possible sky positions to use as objects from a possible 603. plFiberPlate : 6 possible sky positions to use as objects from a possible 602. plFiberPlate : 14 possible sky positions to use as objects from a possible 601. plFiberPlate : 5 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 78 possible sky positions to use as objects from a possible 596. plFiberPlate : 29 possible sky positions to use as objects from a possible 595. plFiberPlate : 28 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : 8 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2293.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2294.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2294.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2295.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 121 2 7 110 3 8 97 4 16 103 5 16 113 6 13 93 7 10 103 8 16 116 9 13 107 10 13 138 11 12 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 224 10 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 229 60 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 220 128 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 235 33 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 235 90 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 260 30 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 249 68 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 225 23 plFiberPlate : 102 possible sky positions to use as objects from a possible 604. plFiberPlate : 63 possible sky positions to use as objects from a possible 603. plFiberPlate : 31 possible sky positions to use as objects from a possible 602. plFiberPlate : 30 possible sky positions to use as objects from a possible 601. plFiberPlate : 14 possible sky positions to use as objects from a possible 600. plFiberPlate : 34 possible sky positions to use as objects from a possible 599. plFiberPlate : 45 possible sky positions to use as objects from a possible 598. plFiberPlate : 50 possible sky positions to use as objects from a possible 597. plFiberPlate : 25 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 3 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 39 possible sky positions to use as objects from a possible 587. plFiberPlate : 29 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 8 possible sky positions to use as objects from a possible 581. plFiberPlate : 29 possible sky positions to use as objects from a possible 580. plFiberPlate : 52 possible sky positions to use as objects from a possible 579. plFiberPlate : 44 possible sky positions to use as objects from a possible 578. plFiberPlate : 23 possible sky positions to use as objects from a possible 577. plFiberPlate : 17 possible sky positions to use as objects from a possible 576. plFiberPlate : 15 possible sky positions to use as objects from a possible 575. plFiberPlate : 15 possible sky positions to use as objects from a possible 574. plFiberPlate : 39 possible sky positions to use as objects from a possible 573. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2294.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2295.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2295.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2296.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 103 2 13 93 3 14 89 4 13 98 5 15 127 6 13 101 7 7 84 8 11 95 9 13 107 10 20 147 11 16 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 220 38 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 207 14 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 213 62 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 203 58 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 214 69 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 129 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 215 162 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 217 37 plFiberPlate : 112 possible sky positions to use as objects from a possible 589. plFiberPlate : 72 possible sky positions to use as objects from a possible 588. plFiberPlate : 52 possible sky positions to use as objects from a possible 587. plFiberPlate : 31 possible sky positions to use as objects from a possible 586. plFiberPlate : 23 possible sky positions to use as objects from a possible 585. plFiberPlate : 16 possible sky positions to use as objects from a possible 584. plFiberPlate : 42 possible sky positions to use as objects from a possible 583. plFiberPlate : 84 possible sky positions to use as objects from a possible 582. plFiberPlate : 52 possible sky positions to use as objects from a possible 581. plFiberPlate : 36 possible sky positions to use as objects from a possible 580. plFiberPlate : 28 possible sky positions to use as objects from a possible 579. plFiberPlate : 7 possible sky positions to use as objects from a possible 578. plFiberPlate : 6 possible sky positions to use as objects from a possible 577. plFiberPlate : 17 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 95 possible sky positions to use as objects from a possible 573. plFiberPlate : 72 possible sky positions to use as objects from a possible 572. plFiberPlate : 53 possible sky positions to use as objects from a possible 571. plFiberPlate : 24 possible sky positions to use as objects from a possible 570. plFiberPlate : 31 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 11 possible sky positions to use as objects from a possible 566. plFiberPlate : 26 possible sky positions to use as objects from a possible 565. plFiberPlate : 48 possible sky positions to use as objects from a possible 564. plFiberPlate : 27 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 11 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 12 possible sky positions to use as objects from a possible 559. plFiberPlate : 12 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2295.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2296.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2296.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2297.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 101 2 10 98 3 12 79 4 16 92 5 15 136 6 20 114 7 13 96 8 15 97 9 11 110 10 17 127 11 18 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 31 10 plFiberPlate : adding spectro-photo std with objId = 5038 40 3 131 127 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 134 73 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 136 87 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 130 10 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 129 4 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 135 134 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 129 6 plFiberPlate : 96 possible sky positions to use as objects from a possible 568. plFiberPlate : 55 possible sky positions to use as objects from a possible 567. plFiberPlate : 37 possible sky positions to use as objects from a possible 566. plFiberPlate : 31 possible sky positions to use as objects from a possible 565. plFiberPlate : 34 possible sky positions to use as objects from a possible 564. plFiberPlate : 23 possible sky positions to use as objects from a possible 563. plFiberPlate : 42 possible sky positions to use as objects from a possible 562. plFiberPlate : 68 possible sky positions to use as objects from a possible 561. plFiberPlate : 36 possible sky positions to use as objects from a possible 560. plFiberPlate : 28 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 21 possible sky positions to use as objects from a possible 556. plFiberPlate : 8 possible sky positions to use as objects from a possible 555. plFiberPlate : 8 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 59 possible sky positions to use as objects from a possible 552. plFiberPlate : 42 possible sky positions to use as objects from a possible 551. plFiberPlate : 26 possible sky positions to use as objects from a possible 550. plFiberPlate : 18 possible sky positions to use as objects from a possible 549. plFiberPlate : 12 possible sky positions to use as objects from a possible 548. plFiberPlate : 17 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 94 possible sky positions to use as objects from a possible 543. plFiberPlate : 62 possible sky positions to use as objects from a possible 542. plFiberPlate : 37 possible sky positions to use as objects from a possible 541. plFiberPlate : 19 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 4 possible sky positions to use as objects from a possible 537. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2296.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2297.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2297.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.2/plPlugMapP-2298.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 126 2 13 91 3 11 98 4 14 108 5 10 103 6 8 90 7 11 92 8 12 113 9 9 116 10 19 161 11 15 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 242 80 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 235 90 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 234 19 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 248 64 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 258 28 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 241 44 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 240 137 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 236 31 plFiberPlate : 132 possible sky positions to use as objects from a possible 610. plFiberPlate : 68 possible sky positions to use as objects from a possible 609. plFiberPlate : 44 possible sky positions to use as objects from a possible 608. plFiberPlate : 25 possible sky positions to use as objects from a possible 607. plFiberPlate : 37 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 62 possible sky positions to use as objects from a possible 604. plFiberPlate : 73 possible sky positions to use as objects from a possible 603. plFiberPlate : 53 possible sky positions to use as objects from a possible 602. plFiberPlate : 47 possible sky positions to use as objects from a possible 601. plFiberPlate : 23 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 26 possible sky positions to use as objects from a possible 596. plFiberPlate : 21 possible sky positions to use as objects from a possible 595. plFiberPlate : 71 possible sky positions to use as objects from a possible 594. plFiberPlate : 52 possible sky positions to use as objects from a possible 593. plFiberPlate : 56 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 19 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 22 possible sky positions to use as objects from a possible 586. plFiberPlate : 32 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 18 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : 22 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2297.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2298.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.2/plOverlay-2298.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Sep 12 21:47:40 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 10 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2289.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2289.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2289.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2290.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2290.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2290.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.0025,9.8212) and (11.77,3.46) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2291.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.0642,-11.5998) and (-2.82,-12.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2291.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2291.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2292.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.9428,11.3361) and (5.12,11.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2292.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2292.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2293.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2293.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (2.3940,-12.3584) and (-1.25,-12.74) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2293.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2294.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.8857,-11.8736) and (-2.85,-12.46) plMakeFanucCodes : fixed path between (7.0917,10.5095) and (5.62,11.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2294.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2294.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2295.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2295.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2295.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2296.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2296.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2296.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2297.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2297.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2297.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2298.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2298.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.2/plFanuc-2298.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Sep 12 21:48:07 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8d71154 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 10 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2289 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2290 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2291 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2292 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2293 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2294 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2295 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2296 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2297 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2298 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Sep 12 21:48:19 CDT 2005 Begin running "plateEnder dr2005.09.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.09.2 -morePipes 1" failed. PS: Read file for stderr output of this job.