Sender: LSF System Subject: Job 91041: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Mar 7 09:58:55 2006 Results reported at Tue Mar 7 10:02:38 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.03.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 147.59 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Tue Mar 7 09:59:10 CST 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Mar 7 09:59:38 CST 2006 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/xpa/v2_1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v18_10/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Tue Mar 7 09:59:39 CST 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v18_10/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_6/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Tue Mar 7 09:59:40 CST 2006 Begin running plate --------------------------------------------------------------- Tue Mar 7 09:59:41 CST 2006 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_10/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_10/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xa792274 makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8172.par makePlates : plateInfo struct for plate 2445 : (h4).mjd 53874 (h4).raCen 202.789 (h4).decCen 66.4904 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.789 66.490 202.789 67.990 plMakePlateFromTile : mjd of obs : 53874.671837 Observed HA/dec of plate center, fiducial point (deg) : 21.998 66.449 21.998 67.949 The rotation angle of the fid. point is -147.706268 plMakePlateFromTile : beginning loop over 1617 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8173.par makePlates : plateInfo struct for plate 2446 : (h4).mjd 53874 (h4).raCen 192.961 (h4).decCen 59.7591 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.961 59.759 192.961 61.259 plMakePlateFromTile : mjd of obs : 53874.589203 Observed HA/dec of plate center, fiducial point (deg) : 1.998 59.719 1.998 61.218 The rotation angle of the fid. point is -176.297921 plMakePlateFromTile : beginning loop over 1596 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8174.par makePlates : plateInfo struct for plate 2447 : (h4).mjd 53874 (h4).raCen 214.834 (h4).decCen 56.354 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 214.834 56.354 214.834 57.854 plMakePlateFromTile : mjd of obs : 53874.671922 Observed HA/dec of plate center, fiducial point (deg) : 9.998 56.318 9.999 57.817 The rotation angle of the fid. point is -159.439704 plMakePlateFromTile : beginning loop over 1600 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8175.par makePlates : plateInfo struct for plate 2448 : (h4).mjd 53874 (h4).raCen 181.89 (h4).decCen 49.9584 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.890 49.958 181.890 51.458 plMakePlateFromTile : mjd of obs : 53874.508672 Observed HA/dec of plate center, fiducial point (deg) : -16.002 49.921 -16.002 51.421 The rotation angle of the fid. point is 139.334704 plMakePlateFromTile : beginning loop over 1583 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8176.par makePlates : plateInfo struct for plate 2449 : (h4).mjd 53874 (h4).raCen 231.76 (h4).decCen 49.8763 (h4).haCen 38 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.760 49.876 231.760 51.376 plMakePlateFromTile : mjd of obs : 53874.796393 Observed HA/dec of plate center, fiducial point (deg) : 37.998 49.849 37.999 51.349 The rotation angle of the fid. point is -106.926040 plMakePlateFromTile : beginning loop over 1620 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8177.par makePlates : plateInfo struct for plate 2450 : (h4).mjd 53874 (h4).raCen 192.7508 (h4).decCen 49.7409 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.751 49.741 192.751 51.241 plMakePlateFromTile : mjd of obs : 53874.588623 Observed HA/dec of plate center, fiducial point (deg) : 1.998 49.703 1.998 51.203 The rotation angle of the fid. point is -174.246119 plMakePlateFromTile : beginning loop over 1549 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8178.par makePlates : plateInfo struct for plate 2451 : (h4).mjd 53874 (h4).raCen 217.152 (h4).decCen 45.2564 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 217.152 45.256 217.152 46.756 plMakePlateFromTile : mjd of obs : 53874.670042 Observed HA/dec of plate center, fiducial point (deg) : 6.998 45.224 6.998 46.723 The rotation angle of the fid. point is -154.130685 plMakePlateFromTile : beginning loop over 1577 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8179.par makePlates : plateInfo struct for plate 2452 : (h4).mjd 53874 (h4).raCen 182.39 (h4).decCen 39.9707 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.390 39.971 182.390 41.471 plMakePlateFromTile : mjd of obs : 53874.507285 Observed HA/dec of plate center, fiducial point (deg) : -17.002 39.936 -17.002 41.435 The rotation angle of the fid. point is 112.329718 plMakePlateFromTile : beginning loop over 1547 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8180.par makePlates : plateInfo struct for plate 2453 : (h4).mjd 53874 (h4).raCen 231.379 (h4).decCen 39.4259 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.379 39.426 231.379 40.926 plMakePlateFromTile : mjd of obs : 53874.673423 Observed HA/dec of plate center, fiducial point (deg) : -6.002 39.400 -6.001 40.899 The rotation angle of the fid. point is 141.926490 plMakePlateFromTile : beginning loop over 1632 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8181.par makePlates : plateInfo struct for plate 2454 : (h4).mjd 53874 (h4).raCen 197.962 (h4).decCen 39.2734 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.962 39.273 197.962 40.773 plMakePlateFromTile : mjd of obs : 53874.672333 Observed HA/dec of plate center, fiducial point (deg) : 26.998 39.239 26.998 40.739 The rotation angle of the fid. point is -98.135239 plMakePlateFromTile : beginning loop over 1498 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8182.par makePlates : plateInfo struct for plate 2455 : (h4).mjd 53874 (h4).raCen 212.808 (h4).decCen 36.5827 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 212.808 36.583 212.808 38.083 plMakePlateFromTile : mjd of obs : 53874.671878 Observed HA/dec of plate center, fiducial point (deg) : 11.998 36.551 11.998 38.051 The rotation angle of the fid. point is -107.436470 plMakePlateFromTile : beginning loop over 1542 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8183.par makePlates : plateInfo struct for plate 2456 : (h4).mjd 53874 (h4).raCen 226.364 (h4).decCen 32.2013 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 226.364 32.201 226.364 33.701 plMakePlateFromTile : mjd of obs : 53874.673402 Observed HA/dec of plate center, fiducial point (deg) : -1.002 32.175 -1.002 33.675 The rotation angle of the fid. point is 54.135237 plMakePlateFromTile : beginning loop over 1599 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8184.par makePlates : plateInfo struct for plate 2457 : (h4).mjd 53874 (h4).raCen 191.459 (h4).decCen 29.8422 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.459 29.842 191.459 31.342 plMakePlateFromTile : mjd of obs : 53874.587821 Observed HA/dec of plate center, fiducial point (deg) : 2.998 29.809 2.998 31.309 The rotation angle of the fid. point is -40.001370 plMakePlateFromTile : beginning loop over 1533 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8185.par makePlates : plateInfo struct for plate 2458 : (h4).mjd 53874 (h4).raCen 206.683 (h4).decCen 28.2136 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.683 28.214 206.683 29.714 plMakePlateFromTile : mjd of obs : 53874.671548 Observed HA/dec of plate center, fiducial point (deg) : 17.998 28.183 17.998 29.683 The rotation angle of the fid. point is -69.039013 plMakePlateFromTile : beginning loop over 1572 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapT-8186.par makePlates : plateInfo struct for plate 2459 : (h4).mjd 53874 (h4).raCen 238.507 (h4).decCen 26.5205 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 238.507 26.520 238.507 28.020 plMakePlateFromTile : mjd of obs : 53874.795713 Observed HA/dec of plate center, fiducial point (deg) : 30.998 26.502 30.998 28.002 The rotation angle of the fid. point is -69.406243 plMakePlateFromTile : beginning loop over 1441 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Mar 7 10:00:17 CST 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_10/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_10/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2445.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 189 2 13 137 3 14 103 4 20 151 5 18 190 6 19 138 7 13 114 8 16 156 9 19 164 10 33 227 11 22 167 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1412 40 4 209 2 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 422 74 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 419 71 plFiberPlate : adding spectro-photo std with objId = 1350 40 3 415 2 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 412 48 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 411 29 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 410 33 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 408 29 plFiberPlate : 167 possible sky positions to use as objects from a possible 855. plFiberPlate : 100 possible sky positions to use as objects from a possible 854. plFiberPlate : 50 possible sky positions to use as objects from a possible 853. plFiberPlate : 45 possible sky positions to use as objects from a possible 852. plFiberPlate : 39 possible sky positions to use as objects from a possible 851. plFiberPlate : 37 possible sky positions to use as objects from a possible 850. plFiberPlate : 42 possible sky positions to use as objects from a possible 849. plFiberPlate : 113 possible sky positions to use as objects from a possible 848. plFiberPlate : 90 possible sky positions to use as objects from a possible 847. plFiberPlate : 60 possible sky positions to use as objects from a possible 846. plFiberPlate : 42 possible sky positions to use as objects from a possible 845. plFiberPlate : 24 possible sky positions to use as objects from a possible 844. plFiberPlate : 20 possible sky positions to use as objects from a possible 843. plFiberPlate : 23 possible sky positions to use as objects from a possible 842. plFiberPlate : 29 possible sky positions to use as objects from a possible 841. plFiberPlate : 24 possible sky positions to use as objects from a possible 840. plFiberPlate : 79 possible sky positions to use as objects from a possible 839. plFiberPlate : 72 possible sky positions to use as objects from a possible 838. plFiberPlate : 52 possible sky positions to use as objects from a possible 837. plFiberPlate : 43 possible sky positions to use as objects from a possible 836. plFiberPlate : 19 possible sky positions to use as objects from a possible 835. plFiberPlate : 24 possible sky positions to use as objects from a possible 834. plFiberPlate : 26 possible sky positions to use as objects from a possible 833. plFiberPlate : 25 possible sky positions to use as objects from a possible 832. plFiberPlate : 16 possible sky positions to use as objects from a possible 831. plFiberPlate : 67 possible sky positions to use as objects from a possible 830. plFiberPlate : 66 possible sky positions to use as objects from a possible 829. plFiberPlate : 38 possible sky positions to use as objects from a possible 828. plFiberPlate : 20 possible sky positions to use as objects from a possible 827. plFiberPlate : 20 possible sky positions to use as objects from a possible 826. plFiberPlate : 25 possible sky positions to use as objects from a possible 825. plFiberPlate : 17 possible sky positions to use as objects from a possible 824. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 710 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2445.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2445.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2446.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 187 2 10 141 3 12 116 4 19 160 5 12 180 6 7 122 7 11 106 8 9 154 9 10 176 10 20 241 11 14 174 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2989 40 5 64 37 plFiberPlate : adding spectro-photo std with objId = 2989 40 1 64 86 plFiberPlate : adding spectro-photo std with objId = 2243 40 5 371 11 plFiberPlate : adding spectro-photo std with objId = 2243 40 5 365 5 plFiberPlate : adding spectro-photo std with objId = 2243 40 3 361 84 plFiberPlate : adding spectro-photo std with objId = 2243 40 6 358 24 plFiberPlate : adding spectro-photo std with objId = 2243 40 2 358 77 plFiberPlate : adding spectro-photo std with objId = 2243 40 2 358 2 plFiberPlate : 172 possible sky positions to use as objects from a possible 855. plFiberPlate : 128 possible sky positions to use as objects from a possible 854. plFiberPlate : 61 possible sky positions to use as objects from a possible 853. plFiberPlate : 48 possible sky positions to use as objects from a possible 852. plFiberPlate : 39 possible sky positions to use as objects from a possible 851. plFiberPlate : 31 possible sky positions to use as objects from a possible 850. plFiberPlate : 76 possible sky positions to use as objects from a possible 849. plFiberPlate : 107 possible sky positions to use as objects from a possible 848. plFiberPlate : 91 possible sky positions to use as objects from a possible 847. plFiberPlate : 61 possible sky positions to use as objects from a possible 846. plFiberPlate : 38 possible sky positions to use as objects from a possible 845. plFiberPlate : 29 possible sky positions to use as objects from a possible 844. plFiberPlate : 24 possible sky positions to use as objects from a possible 843. plFiberPlate : 24 possible sky positions to use as objects from a possible 842. plFiberPlate : 21 possible sky positions to use as objects from a possible 841. plFiberPlate : 24 possible sky positions to use as objects from a possible 840. plFiberPlate : 104 possible sky positions to use as objects from a possible 839. plFiberPlate : 92 possible sky positions to use as objects from a possible 838. plFiberPlate : 71 possible sky positions to use as objects from a possible 837. plFiberPlate : 43 possible sky positions to use as objects from a possible 836. plFiberPlate : 21 possible sky positions to use as objects from a possible 835. plFiberPlate : 26 possible sky positions to use as objects from a possible 834. plFiberPlate : 25 possible sky positions to use as objects from a possible 833. plFiberPlate : 17 possible sky positions to use as objects from a possible 832. plFiberPlate : 23 possible sky positions to use as objects from a possible 831. plFiberPlate : 71 possible sky positions to use as objects from a possible 830. plFiberPlate : 64 possible sky positions to use as objects from a possible 829. plFiberPlate : 33 possible sky positions to use as objects from a possible 828. plFiberPlate : 20 possible sky positions to use as objects from a possible 827. plFiberPlate : 27 possible sky positions to use as objects from a possible 826. plFiberPlate : 18 possible sky positions to use as objects from a possible 825. plFiberPlate : 22 possible sky positions to use as objects from a possible 824. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 716 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2445.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2446.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2446.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2447.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 175 2 16 129 3 11 101 4 15 134 5 13 185 6 7 143 7 7 111 8 6 146 9 11 173 10 29 228 11 22 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 40 6 60 67 plFiberPlate : adding spectro-photo std with objId = 3225 40 6 59 75 plFiberPlate : adding spectro-photo std with objId = 3183 40 3 118 10 plFiberPlate : adding spectro-photo std with objId = 3183 40 2 118 74 plFiberPlate : adding spectro-photo std with objId = 3183 40 1 117 68 plFiberPlate : adding spectro-photo std with objId = 3183 40 3 116 71 plFiberPlate : adding spectro-photo std with objId = 3183 40 3 112 46 plFiberPlate : adding spectro-photo std with objId = 3183 40 2 109 21 plFiberPlate : 152 possible sky positions to use as objects from a possible 846. plFiberPlate : 64 possible sky positions to use as objects from a possible 845. plFiberPlate : 45 possible sky positions to use as objects from a possible 844. plFiberPlate : 36 possible sky positions to use as objects from a possible 843. plFiberPlate : 30 possible sky positions to use as objects from a possible 842. plFiberPlate : 37 possible sky positions to use as objects from a possible 841. plFiberPlate : 57 possible sky positions to use as objects from a possible 840. plFiberPlate : 107 possible sky positions to use as objects from a possible 839. plFiberPlate : 99 possible sky positions to use as objects from a possible 838. plFiberPlate : 67 possible sky positions to use as objects from a possible 837. plFiberPlate : 52 possible sky positions to use as objects from a possible 836. plFiberPlate : 33 possible sky positions to use as objects from a possible 835. plFiberPlate : 14 possible sky positions to use as objects from a possible 834. plFiberPlate : 16 possible sky positions to use as objects from a possible 833. plFiberPlate : 31 possible sky positions to use as objects from a possible 832. plFiberPlate : 31 possible sky positions to use as objects from a possible 831. plFiberPlate : 64 possible sky positions to use as objects from a possible 830. plFiberPlate : 87 possible sky positions to use as objects from a possible 829. plFiberPlate : 61 possible sky positions to use as objects from a possible 828. plFiberPlate : 27 possible sky positions to use as objects from a possible 827. plFiberPlate : 23 possible sky positions to use as objects from a possible 826. plFiberPlate : 24 possible sky positions to use as objects from a possible 825. plFiberPlate : 20 possible sky positions to use as objects from a possible 824. plFiberPlate : 28 possible sky positions to use as objects from a possible 823. plFiberPlate : 28 possible sky positions to use as objects from a possible 822. plFiberPlate : 110 possible sky positions to use as objects from a possible 821. plFiberPlate : 55 possible sky positions to use as objects from a possible 820. plFiberPlate : 36 possible sky positions to use as objects from a possible 819. plFiberPlate : 16 possible sky positions to use as objects from a possible 818. plFiberPlate : 21 possible sky positions to use as objects from a possible 817. plFiberPlate : 30 possible sky positions to use as objects from a possible 816. plFiberPlate : 16 possible sky positions to use as objects from a possible 815. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 727 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2446.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2447.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2447.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2448.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 174 2 10 114 3 8 110 4 14 163 5 9 181 6 6 127 7 6 126 8 7 172 9 6 184 10 16 224 11 14 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 40 1 316 9 plFiberPlate : adding spectro-photo std with objId = 2964 40 6 303 54 plFiberPlate : adding spectro-photo std with objId = 3059 42 4 147 16 plFiberPlate : adding spectro-photo std with objId = 3059 42 4 146 17 plFiberPlate : adding spectro-photo std with objId = 3059 42 6 141 39 plFiberPlate : adding spectro-photo std with objId = 3059 42 1 141 5 plFiberPlate : adding spectro-photo std with objId = 3059 42 4 136 48 plFiberPlate : adding spectro-photo std with objId = 3059 42 3 131 25 plFiberPlate : 177 possible sky positions to use as objects from a possible 864. plFiberPlate : 138 possible sky positions to use as objects from a possible 863. plFiberPlate : 71 possible sky positions to use as objects from a possible 862. plFiberPlate : 33 possible sky positions to use as objects from a possible 861. plFiberPlate : 41 possible sky positions to use as objects from a possible 860. plFiberPlate : 63 possible sky positions to use as objects from a possible 859. plFiberPlate : 57 possible sky positions to use as objects from a possible 858. plFiberPlate : 120 possible sky positions to use as objects from a possible 857. plFiberPlate : 90 possible sky positions to use as objects from a possible 856. plFiberPlate : 71 possible sky positions to use as objects from a possible 855. plFiberPlate : 32 possible sky positions to use as objects from a possible 854. plFiberPlate : 10 possible sky positions to use as objects from a possible 853. plFiberPlate : 19 possible sky positions to use as objects from a possible 852. plFiberPlate : 24 possible sky positions to use as objects from a possible 851. plFiberPlate : 28 possible sky positions to use as objects from a possible 850. plFiberPlate : 28 possible sky positions to use as objects from a possible 849. plFiberPlate : 117 possible sky positions to use as objects from a possible 848. plFiberPlate : 69 possible sky positions to use as objects from a possible 847. plFiberPlate : 60 possible sky positions to use as objects from a possible 846. plFiberPlate : 36 possible sky positions to use as objects from a possible 845. plFiberPlate : 28 possible sky positions to use as objects from a possible 844. plFiberPlate : 29 possible sky positions to use as objects from a possible 843. plFiberPlate : 15 possible sky positions to use as objects from a possible 842. plFiberPlate : 22 possible sky positions to use as objects from a possible 841. plFiberPlate : 24 possible sky positions to use as objects from a possible 840. plFiberPlate : 67 possible sky positions to use as objects from a possible 839. plFiberPlate : 53 possible sky positions to use as objects from a possible 838. plFiberPlate : 31 possible sky positions to use as objects from a possible 837. plFiberPlate : 16 possible sky positions to use as objects from a possible 836. plFiberPlate : 17 possible sky positions to use as objects from a possible 835. plFiberPlate : 18 possible sky positions to use as objects from a possible 834. plFiberPlate : 26 possible sky positions to use as objects from a possible 833. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 715 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2447.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2448.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2448.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2449.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 184 2 12 131 3 15 100 4 16 136 5 15 168 6 12 133 7 8 115 8 15 141 9 14 181 10 27 239 11 15 171 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 40 1 133 10 plFiberPlate : adding spectro-photo std with objId = 3184 40 1 83 30 plFiberPlate : adding spectro-photo std with objId = 3184 40 1 81 31 plFiberPlate : adding spectro-photo std with objId = 3184 40 5 76 56 plFiberPlate : adding spectro-photo std with objId = 3184 40 2 75 47 plFiberPlate : adding spectro-photo std with objId = 3184 40 3 74 6 plFiberPlate : adding spectro-photo std with objId = 3184 40 5 73 45 plFiberPlate : adding spectro-photo std with objId = 3184 40 2 73 34 plFiberPlate : 144 possible sky positions to use as objects from a possible 832. plFiberPlate : 80 possible sky positions to use as objects from a possible 831. plFiberPlate : 64 possible sky positions to use as objects from a possible 830. plFiberPlate : 31 possible sky positions to use as objects from a possible 829. plFiberPlate : 27 possible sky positions to use as objects from a possible 828. plFiberPlate : 56 possible sky positions to use as objects from a possible 827. plFiberPlate : 47 possible sky positions to use as objects from a possible 826. plFiberPlate : 112 possible sky positions to use as objects from a possible 825. plFiberPlate : 100 possible sky positions to use as objects from a possible 824. plFiberPlate : 89 possible sky positions to use as objects from a possible 823. plFiberPlate : 54 possible sky positions to use as objects from a possible 822. plFiberPlate : 19 possible sky positions to use as objects from a possible 821. plFiberPlate : 45 possible sky positions to use as objects from a possible 820. plFiberPlate : 19 possible sky positions to use as objects from a possible 819. plFiberPlate : 31 possible sky positions to use as objects from a possible 818. plFiberPlate : 22 possible sky positions to use as objects from a possible 817. plFiberPlate : 104 possible sky positions to use as objects from a possible 816. plFiberPlate : 86 possible sky positions to use as objects from a possible 815. plFiberPlate : 55 possible sky positions to use as objects from a possible 814. plFiberPlate : 30 possible sky positions to use as objects from a possible 813. plFiberPlate : 26 possible sky positions to use as objects from a possible 812. plFiberPlate : 15 possible sky positions to use as objects from a possible 811. plFiberPlate : 34 possible sky positions to use as objects from a possible 810. plFiberPlate : 22 possible sky positions to use as objects from a possible 809. plFiberPlate : 23 possible sky positions to use as objects from a possible 808. plFiberPlate : 75 possible sky positions to use as objects from a possible 807. plFiberPlate : 63 possible sky positions to use as objects from a possible 806. plFiberPlate : 46 possible sky positions to use as objects from a possible 805. plFiberPlate : 25 possible sky positions to use as objects from a possible 804. plFiberPlate : 25 possible sky positions to use as objects from a possible 803. plFiberPlate : 30 possible sky positions to use as objects from a possible 802. plFiberPlate : 24 possible sky positions to use as objects from a possible 801. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 732 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2448.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2449.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2449.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2450.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 345 to list of science objects plFiberPlate : adding sky number 684 to list of science objects plFiberPlate : adding sky number 697 to list of science objects plFiberPlate : adding sky number 794 to list of science objects plFiberPlate : adding sky number 172 to list of science objects plFiberPlate : adding sky number 291 to list of science objects plFiberPlate : adding sky number 667 to list of science objects plFiberPlate : adding sky number 241 to list of science objects plFiberPlate : adding sky number 480 to list of science objects plFiberPlate : adding sky number 413 to list of science objects plFiberPlate : adding sky number 543 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 443 to list of science objects plFiberPlate : adding sky number 820 to list of science objects plFiberPlate : adding sky number 788 to list of science objects plFiberPlate : adding sky number 546 to list of science objects plFiberPlate : adding sky number 616 to list of science objects plFiberPlate : adding sky number 121 to list of science objects plFiberPlate : adding sky number 520 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 207 to list of science objects plFiberPlate : adding sky number 117 to list of science objects plFiberPlate : adding sky number 685 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 110 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 181 2 9 122 3 7 106 4 14 156 5 3 199 6 2 125 7 2 110 8 3 158 9 1 169 10 12 224 11 12 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3650 40 4 49 29 plFiberPlate : adding spectro-photo std with objId = 3650 40 1 46 80 plFiberPlate : adding spectro-photo std with objId = 3650 40 6 45 16 plFiberPlate : adding spectro-photo std with objId = 3650 40 4 40 28 plFiberPlate : adding spectro-photo std with objId = 3650 40 4 40 26 plFiberPlate : adding spectro-photo std with objId = 3650 40 6 39 28 plFiberPlate : adding spectro-photo std with objId = 3650 40 2 36 28 plFiberPlate : adding spectro-photo std with objId = 3650 40 5 42 74 plFiberPlate : 165 possible sky positions to use as objects from a possible 849. plFiberPlate : 95 possible sky positions to use as objects from a possible 848. plFiberPlate : 42 possible sky positions to use as objects from a possible 847. plFiberPlate : 65 possible sky positions to use as objects from a possible 846. plFiberPlate : 35 possible sky positions to use as objects from a possible 845. plFiberPlate : 55 possible sky positions to use as objects from a possible 844. plFiberPlate : 41 possible sky positions to use as objects from a possible 843. plFiberPlate : 102 possible sky positions to use as objects from a possible 842. plFiberPlate : 93 possible sky positions to use as objects from a possible 841. plFiberPlate : 71 possible sky positions to use as objects from a possible 840. plFiberPlate : 45 possible sky positions to use as objects from a possible 839. plFiberPlate : 30 possible sky positions to use as objects from a possible 838. plFiberPlate : 22 possible sky positions to use as objects from a possible 837. plFiberPlate : 26 possible sky positions to use as objects from a possible 836. plFiberPlate : 40 possible sky positions to use as objects from a possible 835. plFiberPlate : 33 possible sky positions to use as objects from a possible 834. plFiberPlate : 120 possible sky positions to use as objects from a possible 833. plFiberPlate : 81 possible sky positions to use as objects from a possible 832. plFiberPlate : 51 possible sky positions to use as objects from a possible 831. plFiberPlate : 25 possible sky positions to use as objects from a possible 830. plFiberPlate : 14 possible sky positions to use as objects from a possible 829. plFiberPlate : 28 possible sky positions to use as objects from a possible 828. plFiberPlate : 22 possible sky positions to use as objects from a possible 827. plFiberPlate : 23 possible sky positions to use as objects from a possible 826. plFiberPlate : 15 possible sky positions to use as objects from a possible 825. plFiberPlate : 94 possible sky positions to use as objects from a possible 824. plFiberPlate : 50 possible sky positions to use as objects from a possible 823. plFiberPlate : 26 possible sky positions to use as objects from a possible 822. plFiberPlate : 18 possible sky positions to use as objects from a possible 821. plFiberPlate : 10 possible sky positions to use as objects from a possible 820. plFiberPlate : 19 possible sky positions to use as objects from a possible 819. plFiberPlate : 23 possible sky positions to use as objects from a possible 818. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 712 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2449.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2450.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2450.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2451.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 182 2 8 139 3 10 111 4 13 148 5 7 190 6 2 144 7 4 112 8 3 152 9 9 177 10 15 244 11 9 179 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 40 6 473 67 plFiberPlate : adding spectro-photo std with objId = 3664 40 4 56 65 plFiberPlate : adding spectro-photo std with objId = 3664 40 1 53 53 plFiberPlate : adding spectro-photo std with objId = 3664 40 3 52 69 plFiberPlate : adding spectro-photo std with objId = 3664 40 5 50 8 plFiberPlate : adding spectro-photo std with objId = 3664 40 1 49 27 plFiberPlate : adding spectro-photo std with objId = 3664 40 6 47 39 plFiberPlate : adding spectro-photo std with objId = 3664 40 3 45 123 plFiberPlate : 152 possible sky positions to use as objects from a possible 865. plFiberPlate : 111 possible sky positions to use as objects from a possible 864. plFiberPlate : 54 possible sky positions to use as objects from a possible 863. plFiberPlate : 49 possible sky positions to use as objects from a possible 862. plFiberPlate : 47 possible sky positions to use as objects from a possible 861. plFiberPlate : 50 possible sky positions to use as objects from a possible 860. plFiberPlate : 53 possible sky positions to use as objects from a possible 859. plFiberPlate : 114 possible sky positions to use as objects from a possible 858. plFiberPlate : 79 possible sky positions to use as objects from a possible 857. plFiberPlate : 68 possible sky positions to use as objects from a possible 856. plFiberPlate : 38 possible sky positions to use as objects from a possible 855. plFiberPlate : 12 possible sky positions to use as objects from a possible 854. plFiberPlate : 25 possible sky positions to use as objects from a possible 853. plFiberPlate : 21 possible sky positions to use as objects from a possible 852. plFiberPlate : 22 possible sky positions to use as objects from a possible 851. plFiberPlate : 30 possible sky positions to use as objects from a possible 850. plFiberPlate : 122 possible sky positions to use as objects from a possible 849. plFiberPlate : 79 possible sky positions to use as objects from a possible 848. plFiberPlate : 53 possible sky positions to use as objects from a possible 847. plFiberPlate : 25 possible sky positions to use as objects from a possible 846. plFiberPlate : 34 possible sky positions to use as objects from a possible 845. plFiberPlate : 19 possible sky positions to use as objects from a possible 844. plFiberPlate : 23 possible sky positions to use as objects from a possible 843. plFiberPlate : 25 possible sky positions to use as objects from a possible 842. plFiberPlate : 22 possible sky positions to use as objects from a possible 841. plFiberPlate : 88 possible sky positions to use as objects from a possible 840. plFiberPlate : 70 possible sky positions to use as objects from a possible 839. plFiberPlate : 42 possible sky positions to use as objects from a possible 838. plFiberPlate : 20 possible sky positions to use as objects from a possible 837. plFiberPlate : 19 possible sky positions to use as objects from a possible 836. plFiberPlate : 18 possible sky positions to use as objects from a possible 835. plFiberPlate : 18 possible sky positions to use as objects from a possible 834. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 717 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2450.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2451.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2451.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2452.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 93 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 183 2 4 118 3 8 107 4 8 169 5 2 185 6 5 125 7 7 113 8 5 157 9 5 182 10 7 232 11 10 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 444 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 442 56 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 370 25 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 369 87 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 368 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 361 6 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 360 58 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 369 25 plFiberPlate : 186 possible sky positions to use as objects from a possible 857. plFiberPlate : 111 possible sky positions to use as objects from a possible 856. plFiberPlate : 59 possible sky positions to use as objects from a possible 855. plFiberPlate : 43 possible sky positions to use as objects from a possible 854. plFiberPlate : 64 possible sky positions to use as objects from a possible 853. plFiberPlate : 32 possible sky positions to use as objects from a possible 852. plFiberPlate : 73 possible sky positions to use as objects from a possible 851. plFiberPlate : 120 possible sky positions to use as objects from a possible 850. plFiberPlate : 102 possible sky positions to use as objects from a possible 849. plFiberPlate : 75 possible sky positions to use as objects from a possible 848. plFiberPlate : 40 possible sky positions to use as objects from a possible 847. plFiberPlate : 20 possible sky positions to use as objects from a possible 846. plFiberPlate : 28 possible sky positions to use as objects from a possible 845. plFiberPlate : 38 possible sky positions to use as objects from a possible 844. plFiberPlate : 20 possible sky positions to use as objects from a possible 843. plFiberPlate : 23 possible sky positions to use as objects from a possible 842. plFiberPlate : 110 possible sky positions to use as objects from a possible 841. plFiberPlate : 81 possible sky positions to use as objects from a possible 840. plFiberPlate : 59 possible sky positions to use as objects from a possible 839. plFiberPlate : 35 possible sky positions to use as objects from a possible 838. plFiberPlate : 19 possible sky positions to use as objects from a possible 837. plFiberPlate : 20 possible sky positions to use as objects from a possible 836. plFiberPlate : 24 possible sky positions to use as objects from a possible 835. plFiberPlate : 21 possible sky positions to use as objects from a possible 834. plFiberPlate : 26 possible sky positions to use as objects from a possible 833. plFiberPlate : 83 possible sky positions to use as objects from a possible 832. plFiberPlate : 69 possible sky positions to use as objects from a possible 831. plFiberPlate : 47 possible sky positions to use as objects from a possible 830. plFiberPlate : 23 possible sky positions to use as objects from a possible 829. plFiberPlate : 28 possible sky positions to use as objects from a possible 828. plFiberPlate : 28 possible sky positions to use as objects from a possible 827. plFiberPlate : 22 possible sky positions to use as objects from a possible 826. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 708 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2451.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2452.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2452.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2453.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 173 2 21 137 3 13 105 4 23 145 5 20 176 6 16 138 7 17 104 8 14 133 9 22 171 10 36 231 11 22 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 40 4 543 96 plFiberPlate : adding spectro-photo std with objId = 3664 40 2 133 15 plFiberPlate : adding spectro-photo std with objId = 3664 40 1 132 9 plFiberPlate : adding spectro-photo std with objId = 3664 40 3 131 7 plFiberPlate : adding spectro-photo std with objId = 3664 40 2 130 50 plFiberPlate : adding spectro-photo std with objId = 3664 40 3 128 2 plFiberPlate : adding spectro-photo std with objId = 3664 40 5 127 2 plFiberPlate : adding spectro-photo std with objId = 3664 40 4 126 79 plFiberPlate : 138 possible sky positions to use as objects from a possible 814. plFiberPlate : 86 possible sky positions to use as objects from a possible 813. plFiberPlate : 41 possible sky positions to use as objects from a possible 812. plFiberPlate : 49 possible sky positions to use as objects from a possible 811. plFiberPlate : 42 possible sky positions to use as objects from a possible 810. plFiberPlate : 69 possible sky positions to use as objects from a possible 809. plFiberPlate : 37 possible sky positions to use as objects from a possible 808. plFiberPlate : 107 possible sky positions to use as objects from a possible 807. plFiberPlate : 80 possible sky positions to use as objects from a possible 806. plFiberPlate : 52 possible sky positions to use as objects from a possible 805. plFiberPlate : 33 possible sky positions to use as objects from a possible 804. plFiberPlate : 31 possible sky positions to use as objects from a possible 803. plFiberPlate : 25 possible sky positions to use as objects from a possible 802. plFiberPlate : 16 possible sky positions to use as objects from a possible 801. plFiberPlate : 20 possible sky positions to use as objects from a possible 800. plFiberPlate : 22 possible sky positions to use as objects from a possible 799. plFiberPlate : 101 possible sky positions to use as objects from a possible 798. plFiberPlate : 76 possible sky positions to use as objects from a possible 797. plFiberPlate : 46 possible sky positions to use as objects from a possible 796. plFiberPlate : 28 possible sky positions to use as objects from a possible 795. plFiberPlate : 24 possible sky positions to use as objects from a possible 794. plFiberPlate : 27 possible sky positions to use as objects from a possible 793. plFiberPlate : 26 possible sky positions to use as objects from a possible 792. plFiberPlate : 21 possible sky positions to use as objects from a possible 791. plFiberPlate : 14 possible sky positions to use as objects from a possible 790. plFiberPlate : 73 possible sky positions to use as objects from a possible 789. plFiberPlate : 56 possible sky positions to use as objects from a possible 788. plFiberPlate : 44 possible sky positions to use as objects from a possible 787. plFiberPlate : 17 possible sky positions to use as objects from a possible 786. plFiberPlate : 13 possible sky positions to use as objects from a possible 785. plFiberPlate : 25 possible sky positions to use as objects from a possible 784. plFiberPlate : 17 possible sky positions to use as objects from a possible 783. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 732 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2452.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2453.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2453.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2454.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 859 to list of science objects plFiberPlate : adding sky number 187 to list of science objects plFiberPlate : adding sky number 440 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 524 to list of science objects plFiberPlate : adding sky number 253 to list of science objects plFiberPlate : adding sky number 544 to list of science objects plFiberPlate : adding sky number 447 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 827 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : adding sky number 654 to list of science objects plFiberPlate : adding sky number 446 to list of science objects plFiberPlate : adding sky number 652 to list of science objects plFiberPlate : adding sky number 338 to list of science objects plFiberPlate : adding sky number 753 to list of science objects plFiberPlate : adding sky number 239 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 680 to list of science objects plFiberPlate : adding sky number 772 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 796 to list of science objects plFiberPlate : adding sky number 440 to list of science objects plFiberPlate : adding sky number 72 to list of science objects plFiberPlate : adding sky number 160 to list of science objects plFiberPlate : adding sky number 553 to list of science objects plFiberPlate : adding sky number 742 to list of science objects plFiberPlate : adding sky number 290 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 197 to list of science objects plFiberPlate : adding sky number 802 to list of science objects plFiberPlate : adding sky number 745 to list of science objects plFiberPlate : adding sky number 702 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 444 to list of science objects plFiberPlate : adding sky number 308 to list of science objects plFiberPlate : adding sky number 624 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 546 to list of science objects plFiberPlate : adding sky number 434 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 357 to list of science objects plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : adding sky number 757 to list of science objects plFiberPlate : adding sky number 586 to list of science objects plFiberPlate : adding sky number 230 to list of science objects plFiberPlate : adding sky number 598 to list of science objects plFiberPlate : adding sky number 518 to list of science objects plFiberPlate : adding sky number 286 to list of science objects plFiberPlate : adding sky number 555 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 708 to list of science objects plFiberPlate : adding sky number 666 to list of science objects plFiberPlate : adding sky number 265 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 715 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 763 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 176 2 7 130 3 5 97 4 8 131 5 3 163 6 2 118 7 0 109 8 3 159 9 2 160 10 9 218 11 7 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 62 12 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 62 54 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 51 33 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 450 16 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 444 60 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 443 13 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 438 58 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 55 74 plFiberPlate : 154 possible sky positions to use as objects from a possible 797. plFiberPlate : 111 possible sky positions to use as objects from a possible 796. plFiberPlate : 69 possible sky positions to use as objects from a possible 795. plFiberPlate : 45 possible sky positions to use as objects from a possible 794. plFiberPlate : 54 possible sky positions to use as objects from a possible 793. plFiberPlate : 54 possible sky positions to use as objects from a possible 792. plFiberPlate : 53 possible sky positions to use as objects from a possible 791. plFiberPlate : 97 possible sky positions to use as objects from a possible 790. plFiberPlate : 70 possible sky positions to use as objects from a possible 789. plFiberPlate : 61 possible sky positions to use as objects from a possible 788. plFiberPlate : 27 possible sky positions to use as objects from a possible 787. plFiberPlate : 23 possible sky positions to use as objects from a possible 786. plFiberPlate : 20 possible sky positions to use as objects from a possible 785. plFiberPlate : 16 possible sky positions to use as objects from a possible 784. plFiberPlate : 24 possible sky positions to use as objects from a possible 783. plFiberPlate : 29 possible sky positions to use as objects from a possible 782. plFiberPlate : 104 possible sky positions to use as objects from a possible 781. plFiberPlate : 76 possible sky positions to use as objects from a possible 780. plFiberPlate : 63 possible sky positions to use as objects from a possible 779. plFiberPlate : 39 possible sky positions to use as objects from a possible 778. plFiberPlate : 13 possible sky positions to use as objects from a possible 777. plFiberPlate : 26 possible sky positions to use as objects from a possible 776. plFiberPlate : 21 possible sky positions to use as objects from a possible 775. plFiberPlate : 28 possible sky positions to use as objects from a possible 774. plFiberPlate : 25 possible sky positions to use as objects from a possible 773. plFiberPlate : 56 possible sky positions to use as objects from a possible 772. plFiberPlate : 63 possible sky positions to use as objects from a possible 771. plFiberPlate : 41 possible sky positions to use as objects from a possible 770. plFiberPlate : 25 possible sky positions to use as objects from a possible 769. plFiberPlate : 16 possible sky positions to use as objects from a possible 768. plFiberPlate : 22 possible sky positions to use as objects from a possible 767. plFiberPlate : 26 possible sky positions to use as objects from a possible 766. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 729 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2453.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2454.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2454.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2455.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 187 2 6 126 3 8 112 4 8 156 5 1 184 6 2 132 7 2 112 8 2 154 9 3 178 10 16 237 11 9 176 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 529 56 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 525 7 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 519 74 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 517 136 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 516 80 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 516 88 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 513 108 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 522 94 plFiberPlate : 178 possible sky positions to use as objects from a possible 857. plFiberPlate : 107 possible sky positions to use as objects from a possible 856. plFiberPlate : 74 possible sky positions to use as objects from a possible 855. plFiberPlate : 36 possible sky positions to use as objects from a possible 854. plFiberPlate : 63 possible sky positions to use as objects from a possible 853. plFiberPlate : 45 possible sky positions to use as objects from a possible 852. plFiberPlate : 66 possible sky positions to use as objects from a possible 851. plFiberPlate : 129 possible sky positions to use as objects from a possible 850. plFiberPlate : 81 possible sky positions to use as objects from a possible 849. plFiberPlate : 52 possible sky positions to use as objects from a possible 848. plFiberPlate : 34 possible sky positions to use as objects from a possible 847. plFiberPlate : 19 possible sky positions to use as objects from a possible 846. plFiberPlate : 14 possible sky positions to use as objects from a possible 845. plFiberPlate : 26 possible sky positions to use as objects from a possible 844. plFiberPlate : 24 possible sky positions to use as objects from a possible 843. plFiberPlate : 23 possible sky positions to use as objects from a possible 842. plFiberPlate : 109 possible sky positions to use as objects from a possible 841. plFiberPlate : 88 possible sky positions to use as objects from a possible 840. plFiberPlate : 72 possible sky positions to use as objects from a possible 839. plFiberPlate : 39 possible sky positions to use as objects from a possible 838. plFiberPlate : 21 possible sky positions to use as objects from a possible 837. plFiberPlate : 21 possible sky positions to use as objects from a possible 836. plFiberPlate : 27 possible sky positions to use as objects from a possible 835. plFiberPlate : 22 possible sky positions to use as objects from a possible 834. plFiberPlate : 24 possible sky positions to use as objects from a possible 833. plFiberPlate : 83 possible sky positions to use as objects from a possible 832. plFiberPlate : 68 possible sky positions to use as objects from a possible 831. plFiberPlate : 46 possible sky positions to use as objects from a possible 830. plFiberPlate : 32 possible sky positions to use as objects from a possible 829. plFiberPlate : 27 possible sky positions to use as objects from a possible 828. plFiberPlate : 27 possible sky positions to use as objects from a possible 827. plFiberPlate : 21 possible sky positions to use as objects from a possible 826. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 702 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2454.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2455.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2455.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2456.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 188 2 14 146 3 7 111 4 10 142 5 6 173 6 5 144 7 14 114 8 8 148 9 10 178 10 17 240 11 11 181 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 1 119 99 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 603 19 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 599 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 598 50 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 598 42 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 596 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 596 31 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 595 8 plFiberPlate : 169 possible sky positions to use as objects from a possible 855. plFiberPlate : 95 possible sky positions to use as objects from a possible 854. plFiberPlate : 64 possible sky positions to use as objects from a possible 853. plFiberPlate : 50 possible sky positions to use as objects from a possible 852. plFiberPlate : 38 possible sky positions to use as objects from a possible 851. plFiberPlate : 59 possible sky positions to use as objects from a possible 850. plFiberPlate : 66 possible sky positions to use as objects from a possible 849. plFiberPlate : 91 possible sky positions to use as objects from a possible 848. plFiberPlate : 81 possible sky positions to use as objects from a possible 847. plFiberPlate : 54 possible sky positions to use as objects from a possible 846. plFiberPlate : 33 possible sky positions to use as objects from a possible 845. plFiberPlate : 27 possible sky positions to use as objects from a possible 844. plFiberPlate : 28 possible sky positions to use as objects from a possible 843. plFiberPlate : 14 possible sky positions to use as objects from a possible 842. plFiberPlate : 17 possible sky positions to use as objects from a possible 841. plFiberPlate : 29 possible sky positions to use as objects from a possible 840. plFiberPlate : 105 possible sky positions to use as objects from a possible 839. plFiberPlate : 89 possible sky positions to use as objects from a possible 838. plFiberPlate : 74 possible sky positions to use as objects from a possible 837. plFiberPlate : 43 possible sky positions to use as objects from a possible 836. plFiberPlate : 27 possible sky positions to use as objects from a possible 835. plFiberPlate : 29 possible sky positions to use as objects from a possible 834. plFiberPlate : 23 possible sky positions to use as objects from a possible 833. plFiberPlate : 21 possible sky positions to use as objects from a possible 832. plFiberPlate : 15 possible sky positions to use as objects from a possible 831. plFiberPlate : 86 possible sky positions to use as objects from a possible 830. plFiberPlate : 67 possible sky positions to use as objects from a possible 829. plFiberPlate : 42 possible sky positions to use as objects from a possible 828. plFiberPlate : 23 possible sky positions to use as objects from a possible 827. plFiberPlate : 16 possible sky positions to use as objects from a possible 826. plFiberPlate : 22 possible sky positions to use as objects from a possible 825. plFiberPlate : 25 possible sky positions to use as objects from a possible 824. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 728 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2455.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2456.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2456.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2457.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 512 to list of science objects plFiberPlate : adding sky number 571 to list of science objects plFiberPlate : adding sky number 746 to list of science objects plFiberPlate : adding sky number 381 to list of science objects plFiberPlate : adding sky number 801 to list of science objects plFiberPlate : adding sky number 345 to list of science objects plFiberPlate : adding sky number 704 to list of science objects plFiberPlate : adding sky number 591 to list of science objects plFiberPlate : adding sky number 786 to list of science objects plFiberPlate : adding sky number 415 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 817 to list of science objects plFiberPlate : adding sky number 790 to list of science objects plFiberPlate : adding sky number 126 to list of science objects plFiberPlate : adding sky number 755 to list of science objects plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 529 to list of science objects plFiberPlate : adding sky number 239 to list of science objects plFiberPlate : adding sky number 669 to list of science objects plFiberPlate : adding sky number 261 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 191 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 470 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 143 to list of science objects plFiberPlate : adding sky number 764 to list of science objects plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 106 to list of science objects plFiberPlate : adding sky number 416 to list of science objects plFiberPlate : adding sky number 638 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 181 2 9 120 3 9 109 4 10 157 5 7 182 6 5 121 7 4 108 8 2 156 9 4 184 10 20 234 11 17 167 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 488 22 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 486 18 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 71 100 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 69 83 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 63 44 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 59 50 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 59 61 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 68 32 plFiberPlate : 180 possible sky positions to use as objects from a possible 838. plFiberPlate : 134 possible sky positions to use as objects from a possible 837. plFiberPlate : 70 possible sky positions to use as objects from a possible 836. plFiberPlate : 44 possible sky positions to use as objects from a possible 835. plFiberPlate : 32 possible sky positions to use as objects from a possible 834. plFiberPlate : 64 possible sky positions to use as objects from a possible 833. plFiberPlate : 52 possible sky positions to use as objects from a possible 832. plFiberPlate : 123 possible sky positions to use as objects from a possible 831. plFiberPlate : 96 possible sky positions to use as objects from a possible 830. plFiberPlate : 57 possible sky positions to use as objects from a possible 829. plFiberPlate : 28 possible sky positions to use as objects from a possible 828. plFiberPlate : 24 possible sky positions to use as objects from a possible 827. plFiberPlate : 19 possible sky positions to use as objects from a possible 826. plFiberPlate : 29 possible sky positions to use as objects from a possible 825. plFiberPlate : 17 possible sky positions to use as objects from a possible 824. plFiberPlate : 12 possible sky positions to use as objects from a possible 823. plFiberPlate : 110 possible sky positions to use as objects from a possible 822. plFiberPlate : 87 possible sky positions to use as objects from a possible 821. plFiberPlate : 61 possible sky positions to use as objects from a possible 820. plFiberPlate : 32 possible sky positions to use as objects from a possible 819. plFiberPlate : 26 possible sky positions to use as objects from a possible 818. plFiberPlate : 17 possible sky positions to use as objects from a possible 817. plFiberPlate : 31 possible sky positions to use as objects from a possible 816. plFiberPlate : 28 possible sky positions to use as objects from a possible 815. plFiberPlate : 22 possible sky positions to use as objects from a possible 814. plFiberPlate : 62 possible sky positions to use as objects from a possible 813. plFiberPlate : 59 possible sky positions to use as objects from a possible 812. plFiberPlate : 46 possible sky positions to use as objects from a possible 811. plFiberPlate : 20 possible sky positions to use as objects from a possible 810. plFiberPlate : 19 possible sky positions to use as objects from a possible 809. plFiberPlate : 15 possible sky positions to use as objects from a possible 808. plFiberPlate : 20 possible sky positions to use as objects from a possible 807. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 703 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2456.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2457.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2457.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2458.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 191 2 14 130 3 10 99 4 13 152 5 11 165 6 8 131 7 10 111 8 11 158 9 11 175 10 14 242 11 11 192 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 160 12 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 151 37 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 149 64 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 148 17 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 147 413 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 146 34 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 144 63 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 153 118 plFiberPlate : 177 possible sky positions to use as objects from a possible 841. plFiberPlate : 119 possible sky positions to use as objects from a possible 840. plFiberPlate : 44 possible sky positions to use as objects from a possible 839. plFiberPlate : 42 possible sky positions to use as objects from a possible 838. plFiberPlate : 61 possible sky positions to use as objects from a possible 837. plFiberPlate : 47 possible sky positions to use as objects from a possible 836. plFiberPlate : 51 possible sky positions to use as objects from a possible 835. plFiberPlate : 126 possible sky positions to use as objects from a possible 834. plFiberPlate : 103 possible sky positions to use as objects from a possible 833. plFiberPlate : 85 possible sky positions to use as objects from a possible 832. plFiberPlate : 56 possible sky positions to use as objects from a possible 831. plFiberPlate : 25 possible sky positions to use as objects from a possible 830. plFiberPlate : 22 possible sky positions to use as objects from a possible 829. plFiberPlate : 44 possible sky positions to use as objects from a possible 828. plFiberPlate : 36 possible sky positions to use as objects from a possible 827. plFiberPlate : 31 possible sky positions to use as objects from a possible 826. plFiberPlate : 50 possible sky positions to use as objects from a possible 825. plFiberPlate : 61 possible sky positions to use as objects from a possible 824. plFiberPlate : 54 possible sky positions to use as objects from a possible 823. plFiberPlate : 43 possible sky positions to use as objects from a possible 822. plFiberPlate : 38 possible sky positions to use as objects from a possible 821. plFiberPlate : 19 possible sky positions to use as objects from a possible 820. plFiberPlate : 21 possible sky positions to use as objects from a possible 819. plFiberPlate : 26 possible sky positions to use as objects from a possible 818. plFiberPlate : 14 possible sky positions to use as objects from a possible 817. plFiberPlate : 82 possible sky positions to use as objects from a possible 816. plFiberPlate : 53 possible sky positions to use as objects from a possible 815. plFiberPlate : 39 possible sky positions to use as objects from a possible 814. plFiberPlate : 21 possible sky positions to use as objects from a possible 813. plFiberPlate : 18 possible sky positions to use as objects from a possible 812. plFiberPlate : 27 possible sky positions to use as objects from a possible 811. plFiberPlate : 15 possible sky positions to use as objects from a possible 810. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 705 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2457.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2458.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2458.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.03.1/plPlugMapP-2459.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 126 2 14 90 3 19 93 4 11 103 5 4 136 6 9 140 7 19 99 8 12 132 9 12 164 10 25 156 11 6 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 690 41 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 683 22 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 680 14 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 680 175 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 680 28 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 677 138 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 675 85 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 674 163 plFiberPlate : 119 possible sky positions to use as objects from a possible 663. plFiberPlate : 57 possible sky positions to use as objects from a possible 662. plFiberPlate : 48 possible sky positions to use as objects from a possible 661. plFiberPlate : 28 possible sky positions to use as objects from a possible 660. plFiberPlate : 29 possible sky positions to use as objects from a possible 659. plFiberPlate : 29 possible sky positions to use as objects from a possible 658. plFiberPlate : 75 possible sky positions to use as objects from a possible 657. plFiberPlate : 74 possible sky positions to use as objects from a possible 656. plFiberPlate : 63 possible sky positions to use as objects from a possible 655. plFiberPlate : 50 possible sky positions to use as objects from a possible 654. plFiberPlate : 23 possible sky positions to use as objects from a possible 653. plFiberPlate : 17 possible sky positions to use as objects from a possible 652. plFiberPlate : 24 possible sky positions to use as objects from a possible 651. plFiberPlate : 18 possible sky positions to use as objects from a possible 650. plFiberPlate : 20 possible sky positions to use as objects from a possible 649. plFiberPlate : 15 possible sky positions to use as objects from a possible 648. plFiberPlate : 75 possible sky positions to use as objects from a possible 647. plFiberPlate : 53 possible sky positions to use as objects from a possible 646. plFiberPlate : 27 possible sky positions to use as objects from a possible 645. plFiberPlate : 25 possible sky positions to use as objects from a possible 644. plFiberPlate : 12 possible sky positions to use as objects from a possible 643. plFiberPlate : 7 possible sky positions to use as objects from a possible 642. plFiberPlate : 19 possible sky positions to use as objects from a possible 641. plFiberPlate : 7 possible sky positions to use as objects from a possible 640. plFiberPlate : 30 possible sky positions to use as objects from a possible 639. plFiberPlate : 72 possible sky positions to use as objects from a possible 638. plFiberPlate : 43 possible sky positions to use as objects from a possible 637. plFiberPlate : 36 possible sky positions to use as objects from a possible 636. plFiberPlate : 13 possible sky positions to use as objects from a possible 635. plFiberPlate : 15 possible sky positions to use as objects from a possible 634. plFiberPlate : 17 possible sky positions to use as objects from a possible 633. plFiberPlate : 18 possible sky positions to use as objects from a possible 632. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 741 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2458.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2459.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.03.1/plOverlay-2459.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Mar 7 10:00:53 CST 2006 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_10/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_10/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 48 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2445.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2445.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2445.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 54 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2446.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2446.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2446.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 65 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2447.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2447.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2447.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 53 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2448.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2448.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2448.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 70 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2449.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2449.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2449.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 50 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2450.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2450.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2450.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 55 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2451.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2451.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2451.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 46 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2452.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2452.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2452.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 70 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2453.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2453.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2453.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 67 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2454.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2454.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2454.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 40 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2455.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2455.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2455.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 66 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2456.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2456.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2456.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 41 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2457.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2457.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2457.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 43 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2458.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2458.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2458.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 79 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2459.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2459.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.03.1/plFanuc-2459.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Mar 7 10:01:34 CST 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_10/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_10/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa4374cc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2445 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 710 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2446 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 716 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2447 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 727 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2448 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 715 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2449 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 732 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2450 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 712 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2451 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 717 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2452 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 708 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2453 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 732 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2454 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 729 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2455 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 702 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2456 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 728 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2457 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 703 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2458 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 705 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2459 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 741 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Mar 7 10:01:50 CST 2006 Begin running "plateEnder dr2006.03.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_10/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_10/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.03.1 -morePipes 1" failed. PS: Read file for stderr output of this job.