Sender: LSF System Subject: Job 23620: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Feb 6 14:08:01 2001 Results reported at Tue Feb 6 14:17:55 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /usr/local/etc/fermi.shrc ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v7_18 -f OSF1 -z /p/cluster_disk/upsdb -r /home/s1/bgreen/Devel2/dp setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 348.57 sec. Max Memory : 8 MB Max Swap : 74 MB Max Processes : 6 The output (if any) follows: --------------------------------------------------------------- Tue Feb 6 14:08:06 CST 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Feb 6 14:08:11 CST 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_4:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/p/OSF1/ups/v4_4a/bin:/p/OSF1/emacs/v19_30a/bin:/p/OSF1/sdsscvs/v1_4/bin:/p/OSF1/rcs/v5_6/bin:/p/OSF1/diff/v1_0/bin:/p/OSF1/cvs/v1_10/bin:/home/s1/bgreen/bin:/usr/sbin:/usr/ccs/bin:/bin:/usr/bin:/usr/lbin:/usr/ucb:/etc:/usr/bin/X11:/usr/local/bin:.:/p/OSF1/ssc/v4_6/bin:/p/OSF1/astrom/v3_3/bin:/p/OSF1/photo/v5_2_14/bin:/p/OSF1/mt/v7_2/bin:/p/OSF1/ghostview/v4_0b/bin:/home/s1/bgreen/Devel2/dp/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_10/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/dervish/v7_15/bin:/p/OSF1/sdssmath/v5_0/bin:/p/OSF1/astrotools/v5_2/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Tue Feb 6 14:08:11 CST 2001 ASTROM_DIR=/p/OSF1/astrom/v3_3 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_2 CVS_DIR=/p/OSF1/cvs/v1_10 DERVISH_DIR=/p/OSF1/dervish/v7_15 DIFF_DIR=/p/OSF1/diff/v1_0 DP_DIR=/home/s1/bgreen/Devel2/dp EMACS_DIR=/p/OSF1/emacs/v19_30a ENCP_DIR=/p/OSF1/encp/v2_4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v7_15/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_1 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_2 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_7_8 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_14 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 RCS_DIR=/p/OSF1/rcs/v5_6 SDSSCVS_DIR=/p/OSF1/sdsscvs/v1_4 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_0 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_10 SETUPS_DIR=/usr/local/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_6 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/data/dp3.b/data/ucac/v0_7 UPS_DIR=/p/OSF1/ups/v4_4a --------------------------------------------------------------- Tue Feb 6 14:08:12 CST 2001 Begin running plate --------------------------------------------------------------- Tue Feb 6 14:08:12 CST 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /home/s1/bgreen/Devel2/dp/etc/dpStartup.tcl: loading DP scripts from /home/s1/bgreen/Devel2/dp Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140de76e8 makePlates : beginning loop over plObs chain; makePlates : making 21 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0332.par makePlates : plateInfo struct for plate 541 : (h2).mjd 52006 (h2).raCen 114.5407 (h2).decCen 32.66545 (h2).haCen 20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 114.541 32.665 114.541 34.165 plMakePlateFromTile : mjd of obs : 52006.535776 Observed HA/dec of plate center, fiducial point (deg) : 19.998 32.665 19.997 34.164 The rotation angle of the fid. point is -84.158696 plMakePlateFromTile : beginning loop over 1021 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0333.par makePlates : plateInfo struct for plate 542 : (h2).mjd 52006 (h2).raCen 116.3607 (h2).decCen 34.98456 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.361 34.985 116.361 36.485 plMakePlateFromTile : mjd of obs : 52006.535277 Observed HA/dec of plate center, fiducial point (deg) : 17.998 34.983 17.997 36.483 The rotation angle of the fid. point is -93.264200 plMakePlateFromTile : beginning loop over 1066 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0334.par makePlates : plateInfo struct for plate 543 : (h2).mjd 52006 (h2).raCen 118.0757 (h2).decCen 37.11813 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.076 37.118 118.076 38.618 plMakePlateFromTile : mjd of obs : 52006.534488 Observed HA/dec of plate center, fiducial point (deg) : 15.998 37.116 15.997 38.616 The rotation angle of the fid. point is -103.567945 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0335.par makePlates : plateInfo struct for plate 544 : (h2).mjd 52006 (h2).raCen 119.7112 (h2).decCen 38.90362 (h2).haCen 30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.711 38.904 119.711 40.404 plMakePlateFromTile : mjd of obs : 52006.577816 Observed HA/dec of plate center, fiducial point (deg) : 29.998 38.902 29.997 40.401 The rotation angle of the fid. point is -94.871026 plMakePlateFromTile : beginning loop over 1310 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0336.par makePlates : plateInfo struct for plate 545 : (h2).mjd 52006 (h2).raCen 121.3974 (h2).decCen 40.57556 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.397 40.576 121.397 42.076 plMakePlateFromTile : mjd of obs : 52006.576946 Observed HA/dec of plate center, fiducial point (deg) : 27.998 40.573 27.997 42.073 The rotation angle of the fid. point is -100.268877 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0337.par makePlates : plateInfo struct for plate 546 : (h2).mjd 52006 (h2).raCen 123.0274 (h2).decCen 42.22081 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.027 42.221 123.027 43.721 plMakePlateFromTile : mjd of obs : 52006.575921 Observed HA/dec of plate center, fiducial point (deg) : 25.998 42.218 25.997 43.717 The rotation angle of the fid. point is -106.149469 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0338.par makePlates : plateInfo struct for plate 547 : (h2).mjd 52006 (h2).raCen 124.7198 (h2).decCen 43.77536 (h2).haCen 25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.720 43.775 124.720 45.275 plMakePlateFromTile : mjd of obs : 52006.577840 Observed HA/dec of plate center, fiducial point (deg) : 24.998 43.772 24.997 45.271 The rotation angle of the fid. point is -110.958157 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0339.par makePlates : plateInfo struct for plate 548 : (h2).mjd 52006 (h2).raCen 126.4874 (h2).decCen 45.24026 (h2).haCen 23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 126.487 45.240 126.487 46.740 plMakePlateFromTile : mjd of obs : 52006.577196 Observed HA/dec of plate center, fiducial point (deg) : 22.998 45.236 22.997 46.736 The rotation angle of the fid. point is -117.107268 plMakePlateFromTile : beginning loop over 1334 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0340.par makePlates : plateInfo struct for plate 549 : (h2).mjd 52006 (h2).raCen 128.2768 (h2).decCen 46.65639 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.277 46.656 128.277 48.156 plMakePlateFromTile : mjd of obs : 52006.576612 Observed HA/dec of plate center, fiducial point (deg) : 20.998 46.652 20.997 48.151 The rotation angle of the fid. point is -123.451642 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0341.par makePlates : plateInfo struct for plate 550 : (h2).mjd 52006 (h2).raCen 130.1218 (h2).decCen 48.00963 (h2).haCen 19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.122 48.010 130.122 49.510 plMakePlateFromTile : mjd of obs : 52006.576182 Observed HA/dec of plate center, fiducial point (deg) : 18.998 48.004 18.997 49.504 The rotation angle of the fid. point is -129.851456 plMakePlateFromTile : beginning loop over 1244 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (104.91, 186.60, 7.9) and (105.20, 186.06, 7.7) checkLTHo : distance = 0.616, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(104.91, 186.60, 7.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0342.par makePlates : plateInfo struct for plate 551 : (h2).mjd 52006 (h2).raCen 133.9889 (h2).decCen 50.5437 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.989 50.544 133.989 52.044 plMakePlateFromTile : mjd of obs : 52006.578584 Observed HA/dec of plate center, fiducial point (deg) : 15.998 50.537 15.997 52.037 The rotation angle of the fid. point is -140.360963 plMakePlateFromTile : beginning loop over 1198 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0343.par makePlates : plateInfo struct for plate 552 : (h2).mjd 52006 (h2).raCen 136.0142 (h2).decCen 51.72767 (h2).haCen 13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.014 51.728 136.014 53.228 plMakePlateFromTile : mjd of obs : 52006.575882 Observed HA/dec of plate center, fiducial point (deg) : 12.998 51.721 12.997 53.220 The rotation angle of the fid. point is -148.411583 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0344.par makePlates : plateInfo struct for plate 553 : (h2).mjd 52006 (h2).raCen 138.1255 (h2).decCen 52.85424 (h2).haCen 11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 138.125 52.854 138.126 54.354 plMakePlateFromTile : mjd of obs : 52006.576190 Observed HA/dec of plate center, fiducial point (deg) : 10.998 52.847 10.997 54.346 The rotation angle of the fid. point is -154.120005 plMakePlateFromTile : beginning loop over 1377 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0345.par makePlates : plateInfo struct for plate 554 : (h2).mjd 52006 (h2).raCen 140.3102 (h2).decCen 53.93018 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.310 53.930 140.310 55.430 plMakePlateFromTile : mjd of obs : 52006.576700 Observed HA/dec of plate center, fiducial point (deg) : 8.998 53.922 8.997 55.422 The rotation angle of the fid. point is -159.520514 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0346.par makePlates : plateInfo struct for plate 555 : (h2).mjd 52006 (h2).raCen 142.5812 (h2).decCen 54.94468 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.581 54.945 142.581 56.445 plMakePlateFromTile : mjd of obs : 52006.577450 Observed HA/dec of plate center, fiducial point (deg) : 6.998 54.936 6.997 56.436 The rotation angle of the fid. point is -164.592601 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0347.par makePlates : plateInfo struct for plate 556 : (h2).mjd 52006 (h2).raCen 144.9287 (h2).decCen 55.91045 (h2).haCen 5 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.929 55.910 144.929 57.410 plMakePlateFromTile : mjd of obs : 52006.578411 Observed HA/dec of plate center, fiducial point (deg) : 4.998 55.901 4.997 57.401 The rotation angle of the fid. point is -169.352162 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0348.par makePlates : plateInfo struct for plate 557 : (h2).mjd 52006 (h2).raCen 147.3627 (h2).decCen 56.8218 (h2).haCen 2 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.363 56.822 147.363 58.322 plMakePlateFromTile : mjd of obs : 52006.576840 Observed HA/dec of plate center, fiducial point (deg) : 1.998 56.812 1.997 58.312 The rotation angle of the fid. point is -175.868354 plMakePlateFromTile : beginning loop over 1361 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0349.par makePlates : plateInfo struct for plate 558 : (h2).mjd 52006 (h2).raCen 149.907 (h2).decCen 57.64433 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.907 57.644 149.907 59.144 plMakePlateFromTile : mjd of obs : 52006.619920 Observed HA/dec of plate center, fiducial point (deg) : 14.998 57.635 14.997 59.134 The rotation angle of the fid. point is -151.203904 plMakePlateFromTile : beginning loop over 1163 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0350.par makePlates : plateInfo struct for plate 559 : (h2).mjd 52006 (h2).raCen 155.2181 (h2).decCen 59.10852 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.218 59.109 155.218 60.609 plMakePlateFromTile : mjd of obs : 52006.618005 Observed HA/dec of plate center, fiducial point (deg) : 8.998 59.098 8.997 60.597 The rotation angle of the fid. point is -163.146017 plMakePlateFromTile : beginning loop over 1133 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0351.par makePlates : plateInfo struct for plate 560 : (h2).mjd 52006 (h2).raCen 158.0785 (h2).decCen 59.71738 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.078 59.717 158.078 61.217 plMakePlateFromTile : mjd of obs : 52006.617615 Observed HA/dec of plate center, fiducial point (deg) : 5.998 59.706 5.997 61.205 The rotation angle of the fid. point is -168.912121 plMakePlateFromTile : beginning loop over 1272 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk15/complete//plPlugMapT-0352.par makePlates : plateInfo struct for plate 561 : (h2).mjd 52006 (h2).raCen 161.9904 (h2).decCen 60.51701 (h2).haCen 3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.990 60.517 161.990 62.017 plMakePlateFromTile : mjd of obs : 52006.620137 Observed HA/dec of plate center, fiducial point (deg) : 2.998 60.505 2.997 62.004 The rotation angle of the fid. point is -174.576971 plMakePlateFromTile : beginning loop over 1196 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Feb 6 14:09:44 CST 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /home/s1/bgreen/Devel2/dp/etc/dpStartup.tcl: loading DP scripts from /home/s1/bgreen/Devel2/dp Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 21 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0541.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 26 2 5 21 3 12 50 4 21 61 5 4 40 6 6 35 7 22 65 8 24 61 9 23 78 10 28 89 11 18 44 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 4 41 247 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 44 89 plFiberPlate : adding spectro-photo std with objId = 2076 0 4 54 94 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 50 47 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 44 169 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 55 133 plFiberPlate : adding spectro-photo std with objId = 1889 1 5 44 160 plFiberPlate : adding spectro-photo std with objId = 1889 1 5 50 49 plFiberPlate : 75 possible sky positions to use as objects from a possible 278. plFiberPlate : 68 possible sky positions to use as objects from a possible 277. plFiberPlate : 59 possible sky positions to use as objects from a possible 276. plFiberPlate : 39 possible sky positions to use as objects from a possible 275. plFiberPlate : 27 possible sky positions to use as objects from a possible 274. plFiberPlate : 21 possible sky positions to use as objects from a possible 273. plFiberPlate : 11 possible sky positions to use as objects from a possible 272. plFiberPlate : 66 possible sky positions to use as objects from a possible 271. plFiberPlate : 59 possible sky positions to use as objects from a possible 270. plFiberPlate : 49 possible sky positions to use as objects from a possible 269. plFiberPlate : 36 possible sky positions to use as objects from a possible 268. plFiberPlate : 23 possible sky positions to use as objects from a possible 267. plFiberPlate : 16 possible sky positions to use as objects from a possible 266. plFiberPlate : 9 possible sky positions to use as objects from a possible 265. plFiberPlate : 13 possible sky positions to use as objects from a possible 264. plFiberPlate : 8 possible sky positions to use as objects from a possible 263. plFiberPlate : 32 possible sky positions to use as objects from a possible 262. plFiberPlate : 18 possible sky positions to use as objects from a possible 261. plFiberPlate : 6 possible sky positions to use as objects from a possible 260. plFiberPlate : 6 possible sky positions to use as objects from a possible 259. plFiberPlate : 7 possible sky positions to use as objects from a possible 258. plFiberPlate : 9 possible sky positions to use as objects from a possible 257. plFiberPlate : 4 possible sky positions to use as objects from a possible 256. plFiberPlate : 8 possible sky positions to use as objects from a possible 255. plFiberPlate : 5 possible sky positions to use as objects from a possible 254. plFiberPlate : 13 possible sky positions to use as objects from a possible 253. plFiberPlate : 5 possible sky positions to use as objects from a possible 252. plFiberPlate : 8 possible sky positions to use as objects from a possible 251. plFiberPlate : 9 possible sky positions to use as objects from a possible 250. plFiberPlate : 8 possible sky positions to use as objects from a possible 249. plFiberPlate : 8 possible sky positions to use as objects from a possible 248. plFiberPlate : 11 possible sky positions to use as objects from a possible 247. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0541.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0541.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0542.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 32 2 12 28 3 15 69 4 14 68 5 7 38 6 5 40 7 21 79 8 29 82 9 21 92 10 27 100 11 19 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 59 65 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 71 62 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 61 113 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 60 96 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 75 110 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 74 98 plFiberPlate : adding spectro-photo std with objId = 1889 1 2 73 57 plFiberPlate : adding spectro-photo std with objId = 1889 1 2 65 66 plFiberPlate : 86 possible sky positions to use as objects from a possible 325. plFiberPlate : 42 possible sky positions to use as objects from a possible 324. plFiberPlate : 22 possible sky positions to use as objects from a possible 323. plFiberPlate : 16 possible sky positions to use as objects from a possible 322. plFiberPlate : 12 possible sky positions to use as objects from a possible 321. plFiberPlate : 5 possible sky positions to use as objects from a possible 320. plFiberPlate : 17 possible sky positions to use as objects from a possible 319. plFiberPlate : 47 possible sky positions to use as objects from a possible 318. plFiberPlate : 36 possible sky positions to use as objects from a possible 317. plFiberPlate : 31 possible sky positions to use as objects from a possible 316. plFiberPlate : 24 possible sky positions to use as objects from a possible 315. plFiberPlate : 17 possible sky positions to use as objects from a possible 314. plFiberPlate : 6 possible sky positions to use as objects from a possible 313. plFiberPlate : 7 possible sky positions to use as objects from a possible 312. plFiberPlate : 6 possible sky positions to use as objects from a possible 311. plFiberPlate : 16 possible sky positions to use as objects from a possible 310. plFiberPlate : 13 possible sky positions to use as objects from a possible 309. plFiberPlate : 38 possible sky positions to use as objects from a possible 308. plFiberPlate : 26 possible sky positions to use as objects from a possible 307. plFiberPlate : 15 possible sky positions to use as objects from a possible 306. plFiberPlate : 14 possible sky positions to use as objects from a possible 305. plFiberPlate : 6 possible sky positions to use as objects from a possible 304. plFiberPlate : 16 possible sky positions to use as objects from a possible 303. plFiberPlate : 9 possible sky positions to use as objects from a possible 302. plFiberPlate : 13 possible sky positions to use as objects from a possible 301. plFiberPlate : 11 possible sky positions to use as objects from a possible 300. plFiberPlate : 11 possible sky positions to use as objects from a possible 299. plFiberPlate : 8 possible sky positions to use as objects from a possible 298. plFiberPlate : 6 possible sky positions to use as objects from a possible 297. plFiberPlate : 9 possible sky positions to use as objects from a possible 296. plFiberPlate : 16 possible sky positions to use as objects from a possible 295. plFiberPlate : 15 possible sky positions to use as objects from a possible 294. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0541.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0542.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0542.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0543.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 40 2 14 42 3 26 75 4 25 101 5 48 122 6 30 100 7 18 89 8 18 83 9 23 98 10 37 121 11 25 60 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1331 1 3 69 18 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 88 120 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 81 159 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 75 110 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 87 33 plFiberPlate : adding spectro-photo std with objId = 1331 1 2 65 54 plFiberPlate : adding spectro-photo std with objId = 1889 1 5 88 121 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 80 87 plFiberPlate : 108 possible sky positions to use as objects from a possible 475. plFiberPlate : 79 possible sky positions to use as objects from a possible 474. plFiberPlate : 52 possible sky positions to use as objects from a possible 473. plFiberPlate : 27 possible sky positions to use as objects from a possible 472. plFiberPlate : 8 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 24 possible sky positions to use as objects from a possible 469. plFiberPlate : 66 possible sky positions to use as objects from a possible 468. plFiberPlate : 38 possible sky positions to use as objects from a possible 467. plFiberPlate : 26 possible sky positions to use as objects from a possible 466. plFiberPlate : 22 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : 15 possible sky positions to use as objects from a possible 463. plFiberPlate : 8 possible sky positions to use as objects from a possible 462. plFiberPlate : 3 possible sky positions to use as objects from a possible 461. plFiberPlate : 4 possible sky positions to use as objects from a possible 460. plFiberPlate : 62 possible sky positions to use as objects from a possible 459. plFiberPlate : 18 possible sky positions to use as objects from a possible 458. plFiberPlate : 15 possible sky positions to use as objects from a possible 457. plFiberPlate : 9 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 6 possible sky positions to use as objects from a possible 454. plFiberPlate : 6 possible sky positions to use as objects from a possible 453. plFiberPlate : 11 possible sky positions to use as objects from a possible 452. plFiberPlate : 7 possible sky positions to use as objects from a possible 451. plFiberPlate : 62 possible sky positions to use as objects from a possible 450. plFiberPlate : 19 possible sky positions to use as objects from a possible 449. plFiberPlate : 14 possible sky positions to use as objects from a possible 448. plFiberPlate : 19 possible sky positions to use as objects from a possible 447. plFiberPlate : 19 possible sky positions to use as objects from a possible 446. plFiberPlate : 12 possible sky positions to use as objects from a possible 445. plFiberPlate : 5 possible sky positions to use as objects from a possible 444. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 683 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0542.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0543.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0543.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0544.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 53 2 14 47 3 20 92 4 31 114 5 49 132 6 30 110 7 23 82 8 30 83 9 22 90 10 37 137 11 22 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 92 34 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 93 79 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 105 77 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 107 118 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 99 67 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 104 60 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 100 24 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 102 58 plFiberPlate : 122 possible sky positions to use as objects from a possible 507. plFiberPlate : 92 possible sky positions to use as objects from a possible 506. plFiberPlate : 37 possible sky positions to use as objects from a possible 505. plFiberPlate : 13 possible sky positions to use as objects from a possible 504. plFiberPlate : 8 possible sky positions to use as objects from a possible 503. plFiberPlate : 12 possible sky positions to use as objects from a possible 502. plFiberPlate : 30 possible sky positions to use as objects from a possible 501. plFiberPlate : 65 possible sky positions to use as objects from a possible 500. plFiberPlate : 47 possible sky positions to use as objects from a possible 499. plFiberPlate : 33 possible sky positions to use as objects from a possible 498. plFiberPlate : 11 possible sky positions to use as objects from a possible 497. plFiberPlate : 4 possible sky positions to use as objects from a possible 496. plFiberPlate : 10 possible sky positions to use as objects from a possible 495. plFiberPlate : 6 possible sky positions to use as objects from a possible 494. plFiberPlate : 12 possible sky positions to use as objects from a possible 493. plFiberPlate : 14 possible sky positions to use as objects from a possible 492. plFiberPlate : 25 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 6 possible sky positions to use as objects from a possible 489. plFiberPlate : 5 possible sky positions to use as objects from a possible 488. plFiberPlate : 10 possible sky positions to use as objects from a possible 487. plFiberPlate : 4 possible sky positions to use as objects from a possible 486. plFiberPlate : 2 possible sky positions to use as objects from a possible 485. plFiberPlate : 6 possible sky positions to use as objects from a possible 484. plFiberPlate : 18 possible sky positions to use as objects from a possible 483. plFiberPlate : 52 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 24 possible sky positions to use as objects from a possible 480. plFiberPlate : 5 possible sky positions to use as objects from a possible 479. plFiberPlate : 21 possible sky positions to use as objects from a possible 478. plFiberPlate : 14 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0543.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0544.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0544.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0545.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 42 2 9 40 3 27 75 4 27 102 5 27 151 6 26 102 7 23 89 8 33 98 9 31 101 10 35 113 11 22 58 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 122 35 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 106 79 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 112 15 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 111 40 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 116 70 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 104 60 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 121 135 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 117 129 plFiberPlate : 105 possible sky positions to use as objects from a possible 512. plFiberPlate : 87 possible sky positions to use as objects from a possible 511. plFiberPlate : 35 possible sky positions to use as objects from a possible 510. plFiberPlate : 14 possible sky positions to use as objects from a possible 509. plFiberPlate : 12 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 18 possible sky positions to use as objects from a possible 506. plFiberPlate : 71 possible sky positions to use as objects from a possible 505. plFiberPlate : 40 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 15 possible sky positions to use as objects from a possible 502. plFiberPlate : 11 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 8 possible sky positions to use as objects from a possible 498. plFiberPlate : 9 possible sky positions to use as objects from a possible 497. plFiberPlate : 38 possible sky positions to use as objects from a possible 496. plFiberPlate : 36 possible sky positions to use as objects from a possible 495. plFiberPlate : 23 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 9 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 7 possible sky positions to use as objects from a possible 489. plFiberPlate : 7 possible sky positions to use as objects from a possible 488. plFiberPlate : 54 possible sky positions to use as objects from a possible 487. plFiberPlate : 22 possible sky positions to use as objects from a possible 486. plFiberPlate : 14 possible sky positions to use as objects from a possible 485. plFiberPlate : 13 possible sky positions to use as objects from a possible 484. plFiberPlate : 16 possible sky positions to use as objects from a possible 483. plFiberPlate : 21 possible sky positions to use as objects from a possible 482. plFiberPlate : 25 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0544.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0545.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0545.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0546.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 59 2 16 62 3 25 85 4 28 107 5 28 125 6 23 106 7 19 100 8 28 109 9 25 105 10 34 133 11 24 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 122 35 plFiberPlate : adding spectro-photo std with objId = 2076 0 4 137 33 plFiberPlate : adding spectro-photo std with objId = 2075 0 5 39 2 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 39 92 plFiberPlate : adding spectro-photo std with objId = 1889 1 3 124 73 plFiberPlate : adding spectro-photo std with objId = 1889 1 4 121 135 plFiberPlate : adding spectro-photo std with objId = 2075 0 5 36 62 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 126 102 plFiberPlate : 114 possible sky positions to use as objects from a possible 529. plFiberPlate : 79 possible sky positions to use as objects from a possible 528. plFiberPlate : 47 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 34 possible sky positions to use as objects from a possible 525. plFiberPlate : 15 possible sky positions to use as objects from a possible 524. plFiberPlate : 25 possible sky positions to use as objects from a possible 523. plFiberPlate : 63 possible sky positions to use as objects from a possible 522. plFiberPlate : 45 possible sky positions to use as objects from a possible 521. plFiberPlate : 15 possible sky positions to use as objects from a possible 520. plFiberPlate : 17 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 6 possible sky positions to use as objects from a possible 515. plFiberPlate : 10 possible sky positions to use as objects from a possible 514. plFiberPlate : 63 possible sky positions to use as objects from a possible 513. plFiberPlate : 25 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 8 possible sky positions to use as objects from a possible 510. plFiberPlate : 4 possible sky positions to use as objects from a possible 509. plFiberPlate : 13 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 19 possible sky positions to use as objects from a possible 506. plFiberPlate : 14 possible sky positions to use as objects from a possible 505. plFiberPlate : 63 possible sky positions to use as objects from a possible 504. plFiberPlate : 21 possible sky positions to use as objects from a possible 503. plFiberPlate : 13 possible sky positions to use as objects from a possible 502. plFiberPlate : 21 possible sky positions to use as objects from a possible 501. plFiberPlate : 19 possible sky positions to use as objects from a possible 500. plFiberPlate : 9 possible sky positions to use as objects from a possible 499. plFiberPlate : 11 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0545.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0546.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0546.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0547.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 72 2 23 71 3 29 97 4 20 104 5 25 128 6 19 96 7 22 88 8 24 103 9 17 100 10 43 136 11 26 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 143 93 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 142 20 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 143 55 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 48 24 plFiberPlate : adding spectro-photo std with objId = 2076 0 1 144 26 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 148 75 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 39 92 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 132 107 plFiberPlate : 113 possible sky positions to use as objects from a possible 545. plFiberPlate : 83 possible sky positions to use as objects from a possible 544. plFiberPlate : 53 possible sky positions to use as objects from a possible 543. plFiberPlate : 31 possible sky positions to use as objects from a possible 542. plFiberPlate : 28 possible sky positions to use as objects from a possible 541. plFiberPlate : 12 possible sky positions to use as objects from a possible 540. plFiberPlate : 33 possible sky positions to use as objects from a possible 539. plFiberPlate : 63 possible sky positions to use as objects from a possible 538. plFiberPlate : 41 possible sky positions to use as objects from a possible 537. plFiberPlate : 35 possible sky positions to use as objects from a possible 536. plFiberPlate : 19 possible sky positions to use as objects from a possible 535. plFiberPlate : 11 possible sky positions to use as objects from a possible 534. plFiberPlate : 5 possible sky positions to use as objects from a possible 533. plFiberPlate : 21 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 17 possible sky positions to use as objects from a possible 530. plFiberPlate : 52 possible sky positions to use as objects from a possible 529. plFiberPlate : 29 possible sky positions to use as objects from a possible 528. plFiberPlate : 20 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 14 possible sky positions to use as objects from a possible 525. plFiberPlate : 5 possible sky positions to use as objects from a possible 524. plFiberPlate : 6 possible sky positions to use as objects from a possible 523. plFiberPlate : 8 possible sky positions to use as objects from a possible 522. plFiberPlate : 20 possible sky positions to use as objects from a possible 521. plFiberPlate : 55 possible sky positions to use as objects from a possible 520. plFiberPlate : 30 possible sky positions to use as objects from a possible 519. plFiberPlate : 9 possible sky positions to use as objects from a possible 518. plFiberPlate : 12 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 11 possible sky positions to use as objects from a possible 515. plFiberPlate : 23 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0546.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0547.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0547.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0548.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 74 2 9 71 3 16 106 4 22 111 5 31 114 6 20 107 7 26 85 8 25 107 9 26 115 10 31 163 11 12 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 150 81 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 63 34 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 67 88 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 148 75 plFiberPlate : adding spectro-photo std with objId = 2075 0 5 68 54 plFiberPlate : adding spectro-photo std with objId = 2075 0 3 62 94 plFiberPlate : adding spectro-photo std with objId = 2075 0 3 54 52 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 61 46 plFiberPlate : 123 possible sky positions to use as objects from a possible 555. plFiberPlate : 98 possible sky positions to use as objects from a possible 554. plFiberPlate : 81 possible sky positions to use as objects from a possible 553. plFiberPlate : 47 possible sky positions to use as objects from a possible 552. plFiberPlate : 26 possible sky positions to use as objects from a possible 551. plFiberPlate : 29 possible sky positions to use as objects from a possible 550. plFiberPlate : 15 possible sky positions to use as objects from a possible 549. plFiberPlate : 66 possible sky positions to use as objects from a possible 548. plFiberPlate : 21 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 8 possible sky positions to use as objects from a possible 540. plFiberPlate : 51 possible sky positions to use as objects from a possible 539. plFiberPlate : 27 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 15 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 20 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : 17 possible sky positions to use as objects from a possible 531. plFiberPlate : 55 possible sky positions to use as objects from a possible 530. plFiberPlate : 45 possible sky positions to use as objects from a possible 529. plFiberPlate : 30 possible sky positions to use as objects from a possible 528. plFiberPlate : 26 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 15 possible sky positions to use as objects from a possible 525. plFiberPlate : 13 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0547.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0548.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0548.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0549.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 78 2 9 73 3 24 104 4 26 109 5 25 106 6 25 89 7 16 91 8 26 114 9 24 103 10 30 155 11 14 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2076 0 2 157 57 plFiberPlate : adding spectro-photo std with objId = 1889 1 5 165 52 plFiberPlate : adding spectro-photo std with objId = 2075 0 4 67 88 plFiberPlate : adding spectro-photo std with objId = 2076 0 4 171 74 plFiberPlate : adding spectro-photo std with objId = 1895 0 5 161 16 plFiberPlate : adding spectro-photo std with objId = 2075 0 5 68 54 plFiberPlate : adding spectro-photo std with objId = 2076 0 3 167 10 plFiberPlate : adding spectro-photo std with objId = 2076 0 5 164 47 plFiberPlate : 137 possible sky positions to use as objects from a possible 554. plFiberPlate : 105 possible sky positions to use as objects from a possible 553. plFiberPlate : 55 possible sky positions to use as objects from a possible 552. plFiberPlate : 15 possible sky positions to use as objects from a possible 551. plFiberPlate : 22 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 23 possible sky positions to use as objects from a possible 548. plFiberPlate : 60 possible sky positions to use as objects from a possible 547. plFiberPlate : 42 possible sky positions to use as objects from a possible 546. plFiberPlate : 28 possible sky positions to use as objects from a possible 545. plFiberPlate : 17 possible sky positions to use as objects from a possible 544. plFiberPlate : 7 possible sky positions to use as objects from a possible 543. plFiberPlate : 4 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 7 possible sky positions to use as objects from a possible 539. plFiberPlate : 51 possible sky positions to use as objects from a possible 538. plFiberPlate : 32 possible sky positions to use as objects from a possible 537. plFiberPlate : 21 possible sky positions to use as objects from a possible 536. plFiberPlate : 12 possible sky positions to use as objects from a possible 535. plFiberPlate : 3 possible sky positions to use as objects from a possible 534. plFiberPlate : 11 possible sky positions to use as objects from a possible 533. plFiberPlate : 25 possible sky positions to use as objects from a possible 532. plFiberPlate : 19 possible sky positions to use as objects from a possible 531. plFiberPlate : 12 possible sky positions to use as objects from a possible 530. plFiberPlate : 71 possible sky positions to use as objects from a possible 529. plFiberPlate : 40 possible sky positions to use as objects from a possible 528. plFiberPlate : 9 possible sky positions to use as objects from a possible 527. plFiberPlate : 11 possible sky positions to use as objects from a possible 526. plFiberPlate : 13 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 27 possible sky positions to use as objects from a possible 523. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0548.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0549.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0549.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0550.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 77 2 22 67 3 26 95 4 25 111 5 18 107 6 15 73 7 12 45 8 10 61 9 16 81 10 43 161 11 33 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 86 81 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 88 33 plFiberPlate : adding spectro-photo std with objId = 1895 0 5 161 16 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 168 32 plFiberPlate : adding spectro-photo std with objId = 2076 0 4 171 74 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 167 26 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 165 43 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 163 38 plFiberPlate : 139 possible sky positions to use as objects from a possible 482. plFiberPlate : 101 possible sky positions to use as objects from a possible 481. plFiberPlate : 73 possible sky positions to use as objects from a possible 480. plFiberPlate : 45 possible sky positions to use as objects from a possible 479. plFiberPlate : 30 possible sky positions to use as objects from a possible 478. plFiberPlate : 17 possible sky positions to use as objects from a possible 477. plFiberPlate : 49 possible sky positions to use as objects from a possible 476. plFiberPlate : 70 possible sky positions to use as objects from a possible 475. plFiberPlate : 52 possible sky positions to use as objects from a possible 474. plFiberPlate : 42 possible sky positions to use as objects from a possible 473. plFiberPlate : 26 possible sky positions to use as objects from a possible 472. plFiberPlate : 19 possible sky positions to use as objects from a possible 471. plFiberPlate : 14 possible sky positions to use as objects from a possible 470. plFiberPlate : 20 possible sky positions to use as objects from a possible 469. plFiberPlate : 5 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 65 possible sky positions to use as objects from a possible 466. plFiberPlate : 40 possible sky positions to use as objects from a possible 465. plFiberPlate : 40 possible sky positions to use as objects from a possible 464. plFiberPlate : 21 possible sky positions to use as objects from a possible 463. plFiberPlate : 14 possible sky positions to use as objects from a possible 462. plFiberPlate : 20 possible sky positions to use as objects from a possible 461. plFiberPlate : 16 possible sky positions to use as objects from a possible 460. plFiberPlate : 1 possible sky positions to use as objects from a possible 459. plFiberPlate : 6 possible sky positions to use as objects from a possible 458. plFiberPlate : 46 possible sky positions to use as objects from a possible 457. plFiberPlate : 31 possible sky positions to use as objects from a possible 456. plFiberPlate : 23 possible sky positions to use as objects from a possible 455. plFiberPlate : 20 possible sky positions to use as objects from a possible 454. plFiberPlate : 9 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 10 possible sky positions to use as objects from a possible 451. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0549.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0550.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0550.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0551.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 81 2 7 46 3 4 40 4 13 54 5 22 120 6 24 105 7 19 80 8 18 100 9 17 108 10 11 100 11 16 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2074 0 2 104 19 plFiberPlate : adding spectro-photo std with objId = 2074 0 3 102 32 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 193 43 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 188 23 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 195 20 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 194 29 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 115 78 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 110 33 plFiberPlate : 60 possible sky positions to use as objects from a possible 469. plFiberPlate : 37 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 7 possible sky positions to use as objects from a possible 466. plFiberPlate : 16 possible sky positions to use as objects from a possible 465. plFiberPlate : 18 possible sky positions to use as objects from a possible 464. plFiberPlate : 29 possible sky positions to use as objects from a possible 463. plFiberPlate : 37 possible sky positions to use as objects from a possible 462. plFiberPlate : 29 possible sky positions to use as objects from a possible 461. plFiberPlate : 21 possible sky positions to use as objects from a possible 460. plFiberPlate : 12 possible sky positions to use as objects from a possible 459. plFiberPlate : 7 possible sky positions to use as objects from a possible 458. plFiberPlate : 12 possible sky positions to use as objects from a possible 457. plFiberPlate : 8 possible sky positions to use as objects from a possible 456. plFiberPlate : 23 possible sky positions to use as objects from a possible 455. plFiberPlate : 22 possible sky positions to use as objects from a possible 454. plFiberPlate : 30 possible sky positions to use as objects from a possible 453. plFiberPlate : 41 possible sky positions to use as objects from a possible 452. plFiberPlate : 34 possible sky positions to use as objects from a possible 451. plFiberPlate : 22 possible sky positions to use as objects from a possible 450. plFiberPlate : 15 possible sky positions to use as objects from a possible 449. plFiberPlate : 11 possible sky positions to use as objects from a possible 448. plFiberPlate : 13 possible sky positions to use as objects from a possible 447. plFiberPlate : 24 possible sky positions to use as objects from a possible 446. plFiberPlate : 30 possible sky positions to use as objects from a possible 445. plFiberPlate : 51 possible sky positions to use as objects from a possible 444. plFiberPlate : 12 possible sky positions to use as objects from a possible 443. plFiberPlate : 10 possible sky positions to use as objects from a possible 442. plFiberPlate : 8 possible sky positions to use as objects from a possible 441. plFiberPlate : 9 possible sky positions to use as objects from a possible 440. plFiberPlate : 1 possible sky positions to use as objects from a possible 439. plFiberPlate : 19 possible sky positions to use as objects from a possible 438. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0550.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0551.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0551.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0552.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 91 2 14 68 3 16 95 4 23 104 5 17 123 6 17 109 7 21 104 8 34 124 9 17 107 10 28 131 11 20 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 195 20 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 200 40 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 119 12 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 197 42 plFiberPlate : adding spectro-photo std with objId = 1895 0 5 204 24 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 110 33 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 203 29 plFiberPlate : adding spectro-photo std with objId = 2074 0 4 118 44 plFiberPlate : 124 possible sky positions to use as objects from a possible 575. plFiberPlate : 72 possible sky positions to use as objects from a possible 574. plFiberPlate : 41 possible sky positions to use as objects from a possible 573. plFiberPlate : 24 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 29 possible sky positions to use as objects from a possible 569. plFiberPlate : 68 possible sky positions to use as objects from a possible 568. plFiberPlate : 49 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 22 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 7 possible sky positions to use as objects from a possible 563. plFiberPlate : 6 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 21 possible sky positions to use as objects from a possible 560. plFiberPlate : 57 possible sky positions to use as objects from a possible 559. plFiberPlate : 33 possible sky positions to use as objects from a possible 558. plFiberPlate : 22 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 9 possible sky positions to use as objects from a possible 555. plFiberPlate : 5 possible sky positions to use as objects from a possible 554. plFiberPlate : 4 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 50 possible sky positions to use as objects from a possible 551. plFiberPlate : 68 possible sky positions to use as objects from a possible 550. plFiberPlate : 26 possible sky positions to use as objects from a possible 549. plFiberPlate : 16 possible sky positions to use as objects from a possible 548. plFiberPlate : 14 possible sky positions to use as objects from a possible 547. plFiberPlate : 23 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 48 possible sky positions to use as objects from a possible 544. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0551.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0552.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0552.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0553.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 106 2 19 72 3 15 77 4 13 85 5 21 128 6 19 110 7 22 116 8 24 136 9 24 114 10 31 140 11 29 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2074 0 4 127 8 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 123 74 plFiberPlate : adding spectro-photo std with objId = 1895 0 5 212 63 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 218 19 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 202 41 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 130 14 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 203 29 plFiberPlate : adding spectro-photo std with objId = 2074 0 2 134 2 plFiberPlate : 107 possible sky positions to use as objects from a possible 604. plFiberPlate : 79 possible sky positions to use as objects from a possible 603. plFiberPlate : 59 possible sky positions to use as objects from a possible 602. plFiberPlate : 29 possible sky positions to use as objects from a possible 601. plFiberPlate : 25 possible sky positions to use as objects from a possible 600. plFiberPlate : 19 possible sky positions to use as objects from a possible 599. plFiberPlate : 56 possible sky positions to use as objects from a possible 598. plFiberPlate : 83 possible sky positions to use as objects from a possible 597. plFiberPlate : 74 possible sky positions to use as objects from a possible 596. plFiberPlate : 64 possible sky positions to use as objects from a possible 595. plFiberPlate : 51 possible sky positions to use as objects from a possible 594. plFiberPlate : 41 possible sky positions to use as objects from a possible 593. plFiberPlate : 27 possible sky positions to use as objects from a possible 592. plFiberPlate : 15 possible sky positions to use as objects from a possible 591. plFiberPlate : 39 possible sky positions to use as objects from a possible 590. plFiberPlate : 35 possible sky positions to use as objects from a possible 589. plFiberPlate : 61 possible sky positions to use as objects from a possible 588. plFiberPlate : 60 possible sky positions to use as objects from a possible 587. plFiberPlate : 41 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 14 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 20 possible sky positions to use as objects from a possible 581. plFiberPlate : 34 possible sky positions to use as objects from a possible 580. plFiberPlate : 52 possible sky positions to use as objects from a possible 579. plFiberPlate : 35 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 23 possible sky positions to use as objects from a possible 576. plFiberPlate : 20 possible sky positions to use as objects from a possible 575. plFiberPlate : 67 possible sky positions to use as objects from a possible 574. plFiberPlate : 67 possible sky positions to use as objects from a possible 573. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0552.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0553.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0553.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0554.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 104 2 12 84 3 17 99 4 23 109 5 22 135 6 19 98 7 17 91 8 21 114 9 20 111 10 27 160 11 12 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2074 0 4 132 71 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 142 20 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 141 71 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 223 50 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 218 19 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 227 47 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 144 15 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 146 2 plFiberPlate : 126 possible sky positions to use as objects from a possible 609. plFiberPlate : 79 possible sky positions to use as objects from a possible 608. plFiberPlate : 57 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 38 possible sky positions to use as objects from a possible 603. plFiberPlate : 81 possible sky positions to use as objects from a possible 602. plFiberPlate : 83 possible sky positions to use as objects from a possible 601. plFiberPlate : 64 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 16 possible sky positions to use as objects from a possible 595. plFiberPlate : 27 possible sky positions to use as objects from a possible 594. plFiberPlate : 61 possible sky positions to use as objects from a possible 593. plFiberPlate : 66 possible sky positions to use as objects from a possible 592. plFiberPlate : 60 possible sky positions to use as objects from a possible 591. plFiberPlate : 44 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 38 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 33 possible sky positions to use as objects from a possible 585. plFiberPlate : 31 possible sky positions to use as objects from a possible 584. plFiberPlate : 21 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 15 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0553.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0554.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0554.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0555.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 98 2 18 78 3 12 102 4 15 114 5 23 129 6 17 96 7 16 90 8 17 120 9 17 111 10 28 167 11 21 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 231 17 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 237 30 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 236 4 plFiberPlate : adding spectro-photo std with objId = 1345 3 1 211 70 plFiberPlate : adding spectro-photo std with objId = 2074 0 3 161 40 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 238 49 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 161 19 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 146 2 plFiberPlate : 127 possible sky positions to use as objects from a possible 609. plFiberPlate : 111 possible sky positions to use as objects from a possible 608. plFiberPlate : 91 possible sky positions to use as objects from a possible 607. plFiberPlate : 41 possible sky positions to use as objects from a possible 606. plFiberPlate : 30 possible sky positions to use as objects from a possible 605. plFiberPlate : 28 possible sky positions to use as objects from a possible 604. plFiberPlate : 30 possible sky positions to use as objects from a possible 603. plFiberPlate : 89 possible sky positions to use as objects from a possible 602. plFiberPlate : 68 possible sky positions to use as objects from a possible 601. plFiberPlate : 50 possible sky positions to use as objects from a possible 600. plFiberPlate : 31 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 5 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 22 possible sky positions to use as objects from a possible 594. plFiberPlate : 62 possible sky positions to use as objects from a possible 593. plFiberPlate : 64 possible sky positions to use as objects from a possible 592. plFiberPlate : 44 possible sky positions to use as objects from a possible 591. plFiberPlate : 13 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 66 possible sky positions to use as objects from a possible 584. plFiberPlate : 36 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 26 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0554.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0555.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0555.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0556.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 106 2 15 84 3 16 98 4 22 108 5 28 124 6 23 107 7 20 82 8 28 92 9 29 99 10 31 149 11 20 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 248 22 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 156 40 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 238 49 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 255 43 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 243 28 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 161 19 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 254 20 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 254 6 plFiberPlate : 123 possible sky positions to use as objects from a possible 587. plFiberPlate : 76 possible sky positions to use as objects from a possible 586. plFiberPlate : 65 possible sky positions to use as objects from a possible 585. plFiberPlate : 44 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 42 possible sky positions to use as objects from a possible 581. plFiberPlate : 81 possible sky positions to use as objects from a possible 580. plFiberPlate : 63 possible sky positions to use as objects from a possible 579. plFiberPlate : 29 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 7 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 59 possible sky positions to use as objects from a possible 571. plFiberPlate : 46 possible sky positions to use as objects from a possible 570. plFiberPlate : 29 possible sky positions to use as objects from a possible 569. plFiberPlate : 11 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : 12 possible sky positions to use as objects from a possible 566. plFiberPlate : 7 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 14 possible sky positions to use as objects from a possible 563. plFiberPlate : 67 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : 11 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0555.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0556.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0556.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0557.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 93 2 21 83 3 27 100 4 35 108 5 20 121 6 17 102 7 12 88 8 18 103 9 21 99 10 47 138 11 30 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1331 1 1 256 47 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 178 28 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 255 27 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 248 22 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 255 43 plFiberPlate : adding spectro-photo std with objId = 2074 0 5 176 2 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 254 20 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 254 6 plFiberPlate : 144 possible sky positions to use as objects from a possible 575. plFiberPlate : 68 possible sky positions to use as objects from a possible 574. plFiberPlate : 60 possible sky positions to use as objects from a possible 573. plFiberPlate : 19 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 32 possible sky positions to use as objects from a possible 569. plFiberPlate : 72 possible sky positions to use as objects from a possible 568. plFiberPlate : 46 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 17 possible sky positions to use as objects from a possible 565. plFiberPlate : 9 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 11 possible sky positions to use as objects from a possible 562. plFiberPlate : 18 possible sky positions to use as objects from a possible 561. plFiberPlate : 10 possible sky positions to use as objects from a possible 560. plFiberPlate : 59 possible sky positions to use as objects from a possible 559. plFiberPlate : 29 possible sky positions to use as objects from a possible 558. plFiberPlate : 17 possible sky positions to use as objects from a possible 557. plFiberPlate : 10 possible sky positions to use as objects from a possible 556. plFiberPlate : 11 possible sky positions to use as objects from a possible 555. plFiberPlate : 18 possible sky positions to use as objects from a possible 554. plFiberPlate : 11 possible sky positions to use as objects from a possible 553. plFiberPlate : 23 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 40 possible sky positions to use as objects from a possible 550. plFiberPlate : 11 possible sky positions to use as objects from a possible 549. plFiberPlate : 16 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 5 possible sky positions to use as objects from a possible 546. plFiberPlate : 9 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0556.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0557.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0557.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0558.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 77 2 14 66 3 21 83 4 17 108 5 23 114 6 17 66 7 11 39 8 10 46 9 16 73 10 37 137 11 21 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2074 0 1 182 20 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 258 38 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 50 16 plFiberPlate : adding spectro-photo std with objId = 2074 0 6 178 28 plFiberPlate : adding spectro-photo std with objId = 1895 0 5 266 27 plFiberPlate : adding spectro-photo std with objId = 2074 0 4 180 44 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 265 37 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 48 26 plFiberPlate : 119 possible sky positions to use as objects from a possible 437. plFiberPlate : 94 possible sky positions to use as objects from a possible 436. plFiberPlate : 55 possible sky positions to use as objects from a possible 435. plFiberPlate : 17 possible sky positions to use as objects from a possible 434. plFiberPlate : 15 possible sky positions to use as objects from a possible 433. plFiberPlate : 14 possible sky positions to use as objects from a possible 432. plFiberPlate : 54 possible sky positions to use as objects from a possible 431. plFiberPlate : 70 possible sky positions to use as objects from a possible 430. plFiberPlate : 68 possible sky positions to use as objects from a possible 429. plFiberPlate : 46 possible sky positions to use as objects from a possible 428. plFiberPlate : 43 possible sky positions to use as objects from a possible 427. plFiberPlate : 31 possible sky positions to use as objects from a possible 426. plFiberPlate : 7 possible sky positions to use as objects from a possible 425. plFiberPlate : 9 possible sky positions to use as objects from a possible 424. plFiberPlate : 15 possible sky positions to use as objects from a possible 423. plFiberPlate : 21 possible sky positions to use as objects from a possible 422. plFiberPlate : 60 possible sky positions to use as objects from a possible 421. plFiberPlate : 48 possible sky positions to use as objects from a possible 420. plFiberPlate : 43 possible sky positions to use as objects from a possible 419. plFiberPlate : 26 possible sky positions to use as objects from a possible 418. plFiberPlate : 32 possible sky positions to use as objects from a possible 417. plFiberPlate : 17 possible sky positions to use as objects from a possible 416. plFiberPlate : 17 possible sky positions to use as objects from a possible 415. plFiberPlate : 10 possible sky positions to use as objects from a possible 414. plFiberPlate : 4 possible sky positions to use as objects from a possible 413. plFiberPlate : 39 possible sky positions to use as objects from a possible 412. plFiberPlate : 35 possible sky positions to use as objects from a possible 411. plFiberPlate : 32 possible sky positions to use as objects from a possible 410. plFiberPlate : 19 possible sky positions to use as objects from a possible 409. plFiberPlate : 13 possible sky positions to use as objects from a possible 408. plFiberPlate : 16 possible sky positions to use as objects from a possible 407. plFiberPlate : 5 possible sky positions to use as objects from a possible 406. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0557.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0558.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0558.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0559.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 102 2 11 60 3 8 40 4 11 39 5 11 56 6 18 48 7 24 83 8 27 106 9 29 101 10 25 104 11 20 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 68 4 plFiberPlate : adding spectro-photo std with objId = 1896 0 3 60 19 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 289 16 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 292 28 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 295 15 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 75 11 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 73 13 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 68 36 plFiberPlate : 54 possible sky positions to use as objects from a possible 402. plFiberPlate : 43 possible sky positions to use as objects from a possible 401. plFiberPlate : 30 possible sky positions to use as objects from a possible 400. plFiberPlate : 21 possible sky positions to use as objects from a possible 399. plFiberPlate : 13 possible sky positions to use as objects from a possible 398. plFiberPlate : 30 possible sky positions to use as objects from a possible 397. plFiberPlate : 41 possible sky positions to use as objects from a possible 396. plFiberPlate : 38 possible sky positions to use as objects from a possible 395. plFiberPlate : 25 possible sky positions to use as objects from a possible 394. plFiberPlate : 17 possible sky positions to use as objects from a possible 393. plFiberPlate : 10 possible sky positions to use as objects from a possible 392. plFiberPlate : 11 possible sky positions to use as objects from a possible 391. plFiberPlate : 17 possible sky positions to use as objects from a possible 390. plFiberPlate : 13 possible sky positions to use as objects from a possible 389. plFiberPlate : 15 possible sky positions to use as objects from a possible 388. plFiberPlate : 10 possible sky positions to use as objects from a possible 387. plFiberPlate : 47 possible sky positions to use as objects from a possible 386. plFiberPlate : 44 possible sky positions to use as objects from a possible 385. plFiberPlate : 19 possible sky positions to use as objects from a possible 384. plFiberPlate : 23 possible sky positions to use as objects from a possible 383. plFiberPlate : 23 possible sky positions to use as objects from a possible 382. plFiberPlate : 16 possible sky positions to use as objects from a possible 381. plFiberPlate : 14 possible sky positions to use as objects from a possible 380. plFiberPlate : 8 possible sky positions to use as objects from a possible 379. plFiberPlate : 16 possible sky positions to use as objects from a possible 378. plFiberPlate : 18 possible sky positions to use as objects from a possible 377. plFiberPlate : 15 possible sky positions to use as objects from a possible 376. plFiberPlate : 8 possible sky positions to use as objects from a possible 375. plFiberPlate : 10 possible sky positions to use as objects from a possible 374. plFiberPlate : 17 possible sky positions to use as objects from a possible 373. plFiberPlate : 16 possible sky positions to use as objects from a possible 372. plFiberPlate : 9 possible sky positions to use as objects from a possible 371. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0558.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0559.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0559.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0560.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 98 2 16 61 3 16 84 4 22 108 5 24 117 6 9 60 7 13 70 8 17 108 9 15 93 10 35 141 11 25 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1896 0 5 72 16 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 296 35 plFiberPlate : adding spectro-photo std with objId = 1895 0 6 302 28 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 292 28 plFiberPlate : adding spectro-photo std with objId = 1895 0 3 295 15 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 75 11 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 73 13 plFiberPlate : adding spectro-photo std with objId = 1895 0 6 301 40 plFiberPlate : 126 possible sky positions to use as objects from a possible 531. plFiberPlate : 77 possible sky positions to use as objects from a possible 530. plFiberPlate : 26 possible sky positions to use as objects from a possible 529. plFiberPlate : 10 possible sky positions to use as objects from a possible 528. plFiberPlate : 24 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 40 possible sky positions to use as objects from a possible 525. plFiberPlate : 80 possible sky positions to use as objects from a possible 524. plFiberPlate : 48 possible sky positions to use as objects from a possible 523. plFiberPlate : 29 possible sky positions to use as objects from a possible 522. plFiberPlate : 5 possible sky positions to use as objects from a possible 521. plFiberPlate : 14 possible sky positions to use as objects from a possible 520. plFiberPlate : 6 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 13 possible sky positions to use as objects from a possible 517. plFiberPlate : 18 possible sky positions to use as objects from a possible 516. plFiberPlate : 68 possible sky positions to use as objects from a possible 515. plFiberPlate : 64 possible sky positions to use as objects from a possible 514. plFiberPlate : 28 possible sky positions to use as objects from a possible 513. plFiberPlate : 10 possible sky positions to use as objects from a possible 512. plFiberPlate : 9 possible sky positions to use as objects from a possible 511. plFiberPlate : 5 possible sky positions to use as objects from a possible 510. plFiberPlate : 12 possible sky positions to use as objects from a possible 509. plFiberPlate : 17 possible sky positions to use as objects from a possible 508. plFiberPlate : 19 possible sky positions to use as objects from a possible 507. plFiberPlate : 27 possible sky positions to use as objects from a possible 506. plFiberPlate : 4 possible sky positions to use as objects from a possible 505. plFiberPlate : 4 possible sky positions to use as objects from a possible 504. plFiberPlate : 3 possible sky positions to use as objects from a possible 503. plFiberPlate : 7 possible sky positions to use as objects from a possible 502. plFiberPlate : 13 possible sky positions to use as objects from a possible 501. plFiberPlate : 9 possible sky positions to use as objects from a possible 500. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0559.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0560.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0560.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.2/plPlugMapP-0561.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 98 2 9 73 3 19 81 4 18 117 5 13 113 6 6 78 7 9 58 8 4 44 9 13 106 10 26 145 11 14 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 319 44 plFiberPlate : adding spectro-photo std with objId = 1896 0 2 94 86 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 314 65 plFiberPlate : adding spectro-photo std with objId = 1895 0 2 314 19 plFiberPlate : adding spectro-photo std with objId = 1895 0 4 316 33 plFiberPlate : adding spectro-photo std with objId = 1896 0 3 99 52 plFiberPlate : adding spectro-photo std with objId = 1895 0 6 315 71 plFiberPlate : adding spectro-photo std with objId = 1895 0 1 315 6 plFiberPlate : 137 possible sky positions to use as objects from a possible 492. plFiberPlate : 66 possible sky positions to use as objects from a possible 491. plFiberPlate : 39 possible sky positions to use as objects from a possible 490. plFiberPlate : 25 possible sky positions to use as objects from a possible 489. plFiberPlate : 19 possible sky positions to use as objects from a possible 488. plFiberPlate : 24 possible sky positions to use as objects from a possible 487. plFiberPlate : 61 possible sky positions to use as objects from a possible 486. plFiberPlate : 75 possible sky positions to use as objects from a possible 485. plFiberPlate : 44 possible sky positions to use as objects from a possible 484. plFiberPlate : 13 possible sky positions to use as objects from a possible 483. plFiberPlate : 6 possible sky positions to use as objects from a possible 482. plFiberPlate : 10 possible sky positions to use as objects from a possible 481. plFiberPlate : 12 possible sky positions to use as objects from a possible 480. plFiberPlate : 6 possible sky positions to use as objects from a possible 479. plFiberPlate : 27 possible sky positions to use as objects from a possible 478. plFiberPlate : 11 possible sky positions to use as objects from a possible 477. plFiberPlate : 47 possible sky positions to use as objects from a possible 476. plFiberPlate : 36 possible sky positions to use as objects from a possible 475. plFiberPlate : 19 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 10 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 5 possible sky positions to use as objects from a possible 469. plFiberPlate : 13 possible sky positions to use as objects from a possible 468. plFiberPlate : 38 possible sky positions to use as objects from a possible 467. plFiberPlate : 38 possible sky positions to use as objects from a possible 466. plFiberPlate : 18 possible sky positions to use as objects from a possible 465. plFiberPlate : 15 possible sky positions to use as objects from a possible 464. plFiberPlate : 14 possible sky positions to use as objects from a possible 463. plFiberPlate : 14 possible sky positions to use as objects from a possible 462. plFiberPlate : 7 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0560.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0561.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.2/plOverlay-0561.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Feb 6 14:11:55 CST 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /home/s1/bgreen/Devel2/dp/etc/dpStartup.tcl: loading DP scripts from /home/s1/bgreen/Devel2/dp Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 21 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0541.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.2573,9.7386) and (7.10,10.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0541.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0541.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0542.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0542.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0542.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 21 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0543.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0543.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0543.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0544.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0544.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0544.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0545.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0545.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.5965,9.1749) and (1.23,12.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0545.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0546.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0546.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0546.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0547.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8768,4.4844) and (12.21,3.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0547.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0547.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0548.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0548.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0548.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0549.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0549.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2464,-8.5456) and (1.75,-12.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0549.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0550.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.6241,-11.4797) and (-4.83,-11.86) plMakeFanucCodes : fixed path between (-4.8284,-11.8564) and (-4.43,-11.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0550.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0550.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0551.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0551.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0551.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0552.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.6439,-10.0862) and (-6.37,-11.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0552.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0552.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0553.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0553.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0553.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.0194,-10.0677) and (-11.89,-4.57) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0554.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0554.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0554.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0555.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.9665,11.6943) and (3.19,12.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0555.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0555.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0556.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6117,4.8281) and (-12.14,2.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0556.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0556.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0557.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0557.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0557.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0558.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0558.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0558.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0559.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0559.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0559.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0560.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0560.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0560.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0561.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0561.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.2/plFanuc-0561.par plMakeFanucCodes : temperature difference 18.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00038232 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Feb 6 14:13:39 CST 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /home/s1/bgreen/Devel2/dp/etc/dpStartup.tcl: loading DP scripts from /home/s1/bgreen/Devel2/dp Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140de76e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 21 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 541 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 542 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 543 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 683 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 544 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 545 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 546 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 547 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 548 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 549 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 550 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 551 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 552 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 553 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 554 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 555 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 556 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 557 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 558 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 559 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 560 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 561 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Feb 6 14:14:57 CST 2001 Begin running plateEnder dr2001.2 -morePipes 1 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /home/s1/bgreen/Devel2/dp/etc/dpStartup.tcl: loading DP scripts from /home/s1/bgreen/Devel2/dp Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Tue Feb 6 14:17:52 CST 2001 ALL DONE PS: Read file for stderr output of this job.