Sender: LSF System Subject: Job 42356: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Jan 18 15:33:26 2002 Results reported at Fri Jan 18 15:36:24 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_51 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.01.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 164.48 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Jan 18 15:33:28 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Jan 18 15:33:30 CST 2002 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/fnal/ups/prd/encp/v2_14OSF1-V4:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/ktools/v1_4/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/sbin:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5c/bin:/p/OSF1/photo/v5_2_27/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/GENERIC_UNIX/dp/v11_51/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_12/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_3/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_6/bin --------------------------------------------------------------- Fri Jan 18 15:33:30 CST 2002 ASTROM_DIR=/p/OSF1/astrom/v3_5c ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_3 DP_DIR=/p/GENERIC_UNIX/dp/v11_51 DUST_DIR=/p/IRIX6/dust/v1_0 ENCP_DIR=/fnal/ups/prd/encp/v2_14OSF1-V4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v8_3/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_4 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_27 PLATE_DIR=/p/OSF1/plate/v3_6 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_12 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Fri Jan 18 15:33:30 CST 2002 Begin running plate --------------------------------------------------------------- Fri Jan 18 15:33:30 CST 2002 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_51/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_51 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_4/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e28668 makePlates : beginning loop over plObs chain; makePlates : making 12 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0616.par makePlates : plateInfo struct for plate 845 : (h2).mjd 52336 (h2).raCen 188.1192 (h2).decCen 4.942414 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.119 4.942 188.119 6.442 plMakePlateFromTile : mjd of obs : 52336.797070 Observed HA/dec of plate center, fiducial point (deg) : 5.998 4.939 5.998 6.438 The rotation angle of the fid. point is -10.645437 plMakePlateFromTile : beginning loop over 1200 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0617.par makePlates : plateInfo struct for plate 846 : (h2).mjd 52336 (h2).raCen 189.9633 (h2).decCen 4.998221 (h2).haCen 5 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.963 4.998 189.963 6.498 plMakePlateFromTile : mjd of obs : 52336.799407 Observed HA/dec of plate center, fiducial point (deg) : 4.998 4.995 4.998 6.494 The rotation angle of the fid. point is -8.925355 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0618.par makePlates : plateInfo struct for plate 847 : (h2).mjd 52336 (h2).raCen 191.9959 (h2).decCen 4.878454 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.996 4.878 191.996 6.378 plMakePlateFromTile : mjd of obs : 52336.841060 Observed HA/dec of plate center, fiducial point (deg) : 17.998 4.875 17.998 6.375 The rotation angle of the fid. point is -28.856587 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0619.par makePlates : plateInfo struct for plate 848 : (h2).mjd 52336 (h2).raCen 193.8493 (h2).decCen 4.864746 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.849 4.865 193.849 6.365 plMakePlateFromTile : mjd of obs : 52336.840652 Observed HA/dec of plate center, fiducial point (deg) : 15.998 4.862 15.998 6.361 The rotation angle of the fid. point is -26.200109 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0620.par makePlates : plateInfo struct for plate 849 : (h2).mjd 52336 (h2).raCen 195.799 (h2).decCen 4.867938 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.799 4.868 195.799 6.368 plMakePlateFromTile : mjd of obs : 52336.840511 Observed HA/dec of plate center, fiducial point (deg) : 13.998 4.865 13.998 6.364 The rotation angle of the fid. point is -23.388839 plMakePlateFromTile : beginning loop over 1342 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0621.par makePlates : plateInfo struct for plate 850 : (h2).mjd 52336 (h2).raCen 197.656 (h2).decCen 4.884699 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.656 4.885 197.656 6.385 plMakePlateFromTile : mjd of obs : 52336.840113 Observed HA/dec of plate center, fiducial point (deg) : 11.998 4.881 11.998 6.381 The rotation angle of the fid. point is -20.422570 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0622.par makePlates : plateInfo struct for plate 851 : (h2).mjd 52336 (h2).raCen 199.7038 (h2).decCen 4.793384 (h2).haCen 10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.704 4.793 199.704 6.293 plMakePlateFromTile : mjd of obs : 52336.840243 Observed HA/dec of plate center, fiducial point (deg) : 9.998 4.790 9.998 6.290 The rotation angle of the fid. point is -17.243332 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0623.par makePlates : plateInfo struct for plate 852 : (h2).mjd 52336 (h2).raCen 201.7998 (h2).decCen 4.772353 (h2).haCen 8 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.800 4.772 201.800 6.272 plMakePlateFromTile : mjd of obs : 52336.840507 Observed HA/dec of plate center, fiducial point (deg) : 7.998 4.769 7.998 6.269 The rotation angle of the fid. point is -13.971096 plMakePlateFromTile : beginning loop over 1303 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0624.par makePlates : plateInfo struct for plate 853 : (h2).mjd 52336 (h2).raCen 203.9914 (h2).decCen 4.711831 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.991 4.712 203.991 6.212 plMakePlateFromTile : mjd of obs : 52336.841036 Observed HA/dec of plate center, fiducial point (deg) : 5.998 4.709 5.998 6.208 The rotation angle of the fid. point is -10.570426 plMakePlateFromTile : beginning loop over 1263 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0625.par makePlates : plateInfo struct for plate 854 : (h2).mjd 52336 (h2).raCen 206.1019 (h2).decCen 4.645369 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.102 4.645 206.102 6.145 plMakePlateFromTile : mjd of obs : 52336.880134 Observed HA/dec of plate center, fiducial point (deg) : 17.998 4.643 17.998 6.142 The rotation angle of the fid. point is -28.684802 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0626.par makePlates : plateInfo struct for plate 855 : (h2).mjd 52336 (h2).raCen 207.9263 (h2).decCen 4.621891 (h2).haCen 17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.926 4.622 207.926 6.122 plMakePlateFromTile : mjd of obs : 52336.882416 Observed HA/dec of plate center, fiducial point (deg) : 16.998 4.620 16.998 6.119 The rotation angle of the fid. point is -27.369882 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk32/complete//plPlugMapT-0627.par makePlates : plateInfo struct for plate 856 : (h2).mjd 52336 (h2).raCen 209.4557 (h2).decCen 4.572016 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 209.456 4.572 209.456 6.072 plMakePlateFromTile : mjd of obs : 52336.881111 Observed HA/dec of plate center, fiducial point (deg) : 14.998 4.570 14.998 6.069 The rotation angle of the fid. point is -24.616646 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Jan 18 15:34:02 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_51/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_51 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_4/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 12 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0845.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 118 2 20 88 3 12 77 4 7 54 5 5 64 6 3 69 7 5 71 8 7 115 9 8 105 10 18 158 11 15 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 181 36 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 185 16 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 181 2 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 39 9 plFiberPlate : adding spectro-photo std with objId = 2247 0 4 179 52 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 184 28 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 45 6 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 188 17 plFiberPlate : 100 possible sky positions to use as objects from a possible 491. plFiberPlate : 53 possible sky positions to use as objects from a possible 490. plFiberPlate : 33 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 12 possible sky positions to use as objects from a possible 487. plFiberPlate : 19 possible sky positions to use as objects from a possible 486. plFiberPlate : 44 possible sky positions to use as objects from a possible 485. plFiberPlate : 54 possible sky positions to use as objects from a possible 484. plFiberPlate : 39 possible sky positions to use as objects from a possible 483. plFiberPlate : 30 possible sky positions to use as objects from a possible 482. plFiberPlate : 4 possible sky positions to use as objects from a possible 481. plFiberPlate : 15 possible sky positions to use as objects from a possible 480. plFiberPlate : 15 possible sky positions to use as objects from a possible 479. plFiberPlate : 10 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 27 possible sky positions to use as objects from a possible 476. plFiberPlate : 47 possible sky positions to use as objects from a possible 475. plFiberPlate : 39 possible sky positions to use as objects from a possible 474. plFiberPlate : 28 possible sky positions to use as objects from a possible 473. plFiberPlate : 16 possible sky positions to use as objects from a possible 472. plFiberPlate : 14 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 9 possible sky positions to use as objects from a possible 469. plFiberPlate : 23 possible sky positions to use as objects from a possible 468. plFiberPlate : 26 possible sky positions to use as objects from a possible 467. plFiberPlate : 18 possible sky positions to use as objects from a possible 466. plFiberPlate : 12 possible sky positions to use as objects from a possible 465. plFiberPlate : 6 possible sky positions to use as objects from a possible 464. plFiberPlate : 10 possible sky positions to use as objects from a possible 463. plFiberPlate : 2 possible sky positions to use as objects from a possible 462. plFiberPlate : 4 possible sky positions to use as objects from a possible 461. plFiberPlate : 21 possible sky positions to use as objects from a possible 460. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0845.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0845.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0846.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 117 2 10 85 3 9 95 4 10 117 5 13 135 6 6 79 7 5 76 8 9 114 9 10 105 10 14 154 11 13 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 52 71 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 60 2 plFiberPlate : adding spectro-photo std with objId = 2247 0 2 196 10 plFiberPlate : adding spectro-photo std with objId = 2247 0 5 199 37 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 198 50 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 190 33 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 196 53 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 202 29 plFiberPlate : 122 possible sky positions to use as objects from a possible 601. plFiberPlate : 74 possible sky positions to use as objects from a possible 600. plFiberPlate : 19 possible sky positions to use as objects from a possible 599. plFiberPlate : 42 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 15 possible sky positions to use as objects from a possible 596. plFiberPlate : 54 possible sky positions to use as objects from a possible 595. plFiberPlate : 95 possible sky positions to use as objects from a possible 594. plFiberPlate : 77 possible sky positions to use as objects from a possible 593. plFiberPlate : 54 possible sky positions to use as objects from a possible 592. plFiberPlate : 27 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 19 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 27 possible sky positions to use as objects from a possible 586. plFiberPlate : 96 possible sky positions to use as objects from a possible 585. plFiberPlate : 46 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 5 possible sky positions to use as objects from a possible 582. plFiberPlate : 22 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 19 possible sky positions to use as objects from a possible 579. plFiberPlate : 27 possible sky positions to use as objects from a possible 578. plFiberPlate : 10 possible sky positions to use as objects from a possible 577. plFiberPlate : 37 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 11 possible sky positions to use as objects from a possible 574. plFiberPlate : 6 possible sky positions to use as objects from a possible 573. plFiberPlate : 3 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 25 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0845.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0846.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0846.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0847.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 110 2 18 85 3 13 93 4 12 113 5 12 139 6 10 85 7 9 77 8 13 105 9 11 100 10 19 141 11 14 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 62 35 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 60 2 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 209 48 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 201 42 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 210 10 plFiberPlate : adding spectro-photo std with objId = 2247 0 5 199 37 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 452 25 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 74 24 plFiberPlate : 121 possible sky positions to use as objects from a possible 588. plFiberPlate : 68 possible sky positions to use as objects from a possible 587. plFiberPlate : 34 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 27 possible sky positions to use as objects from a possible 584. plFiberPlate : 40 possible sky positions to use as objects from a possible 583. plFiberPlate : 27 possible sky positions to use as objects from a possible 582. plFiberPlate : 83 possible sky positions to use as objects from a possible 581. plFiberPlate : 46 possible sky positions to use as objects from a possible 580. plFiberPlate : 32 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 27 possible sky positions to use as objects from a possible 575. plFiberPlate : 8 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 113 possible sky positions to use as objects from a possible 572. plFiberPlate : 74 possible sky positions to use as objects from a possible 571. plFiberPlate : 38 possible sky positions to use as objects from a possible 570. plFiberPlate : 19 possible sky positions to use as objects from a possible 569. plFiberPlate : 6 possible sky positions to use as objects from a possible 568. plFiberPlate : 5 possible sky positions to use as objects from a possible 567. plFiberPlate : 17 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 55 possible sky positions to use as objects from a possible 563. plFiberPlate : 39 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : 4 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 5 possible sky positions to use as objects from a possible 558. plFiberPlate : 17 possible sky positions to use as objects from a possible 557. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0846.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0847.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0847.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0848.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 131 2 17 86 3 13 85 4 10 110 5 16 134 6 5 87 7 3 76 8 8 117 9 6 100 10 11 148 11 14 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 218 22 plFiberPlate : adding spectro-photo std with objId = 2190 1 6 81 111 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 85 32 plFiberPlate : adding spectro-photo std with objId = 2247 0 5 225 44 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 224 28 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 81 18 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 216 55 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 74 24 plFiberPlate : 108 possible sky positions to use as objects from a possible 610. plFiberPlate : 72 possible sky positions to use as objects from a possible 609. plFiberPlate : 60 possible sky positions to use as objects from a possible 608. plFiberPlate : 27 possible sky positions to use as objects from a possible 607. plFiberPlate : 38 possible sky positions to use as objects from a possible 606. plFiberPlate : 24 possible sky positions to use as objects from a possible 605. plFiberPlate : 55 possible sky positions to use as objects from a possible 604. plFiberPlate : 95 possible sky positions to use as objects from a possible 603. plFiberPlate : 53 possible sky positions to use as objects from a possible 602. plFiberPlate : 51 possible sky positions to use as objects from a possible 601. plFiberPlate : 37 possible sky positions to use as objects from a possible 600. plFiberPlate : 12 possible sky positions to use as objects from a possible 599. plFiberPlate : 10 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 39 possible sky positions to use as objects from a possible 595. plFiberPlate : 72 possible sky positions to use as objects from a possible 594. plFiberPlate : 47 possible sky positions to use as objects from a possible 593. plFiberPlate : 27 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 7 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 6 possible sky positions to use as objects from a possible 586. plFiberPlate : 46 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 23 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0847.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0848.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0848.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0849.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 132 2 17 106 3 13 99 4 17 104 5 11 124 6 7 76 7 5 83 8 12 130 9 7 105 10 19 163 11 13 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 228 32 plFiberPlate : adding spectro-photo std with objId = 2247 0 4 230 14 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 236 38 plFiberPlate : adding spectro-photo std with objId = 2247 0 5 225 44 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 224 28 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 231 24 plFiberPlate : adding spectro-photo std with objId = 2247 0 2 232 14 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 232 68 plFiberPlate : 134 possible sky positions to use as objects from a possible 618. plFiberPlate : 67 possible sky positions to use as objects from a possible 617. plFiberPlate : 47 possible sky positions to use as objects from a possible 616. plFiberPlate : 46 possible sky positions to use as objects from a possible 615. plFiberPlate : 22 possible sky positions to use as objects from a possible 614. plFiberPlate : 21 possible sky positions to use as objects from a possible 613. plFiberPlate : 72 possible sky positions to use as objects from a possible 612. plFiberPlate : 77 possible sky positions to use as objects from a possible 611. plFiberPlate : 57 possible sky positions to use as objects from a possible 610. plFiberPlate : 49 possible sky positions to use as objects from a possible 609. plFiberPlate : 28 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : 18 possible sky positions to use as objects from a possible 606. plFiberPlate : 8 possible sky positions to use as objects from a possible 605. plFiberPlate : 29 possible sky positions to use as objects from a possible 604. plFiberPlate : 31 possible sky positions to use as objects from a possible 603. plFiberPlate : 78 possible sky positions to use as objects from a possible 602. plFiberPlate : 53 possible sky positions to use as objects from a possible 601. plFiberPlate : 23 possible sky positions to use as objects from a possible 600. plFiberPlate : 19 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 37 possible sky positions to use as objects from a possible 595. plFiberPlate : 42 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 5 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 11 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0848.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0849.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0849.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0850.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 131 2 19 98 3 10 93 4 10 118 5 14 142 6 8 79 7 8 70 8 7 122 9 10 102 10 14 156 11 11 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 101 44 plFiberPlate : adding spectro-photo std with objId = 2247 0 5 243 47 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 99 10 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 246 4 plFiberPlate : adding spectro-photo std with objId = 2247 0 4 254 33 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 483 22 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 243 35 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 112 50 plFiberPlate : 127 possible sky positions to use as objects from a possible 613. plFiberPlate : 75 possible sky positions to use as objects from a possible 612. plFiberPlate : 44 possible sky positions to use as objects from a possible 611. plFiberPlate : 17 possible sky positions to use as objects from a possible 610. plFiberPlate : 38 possible sky positions to use as objects from a possible 609. plFiberPlate : 26 possible sky positions to use as objects from a possible 608. plFiberPlate : 50 possible sky positions to use as objects from a possible 607. plFiberPlate : 76 possible sky positions to use as objects from a possible 606. plFiberPlate : 56 possible sky positions to use as objects from a possible 605. plFiberPlate : 25 possible sky positions to use as objects from a possible 604. plFiberPlate : 17 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 27 possible sky positions to use as objects from a possible 598. plFiberPlate : 96 possible sky positions to use as objects from a possible 597. plFiberPlate : 38 possible sky positions to use as objects from a possible 596. plFiberPlate : 10 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 3 possible sky positions to use as objects from a possible 593. plFiberPlate : 3 possible sky positions to use as objects from a possible 592. plFiberPlate : 5 possible sky positions to use as objects from a possible 591. plFiberPlate : 32 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 6 possible sky positions to use as objects from a possible 585. plFiberPlate : 5 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0849.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0850.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0850.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0851.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 121 2 10 106 3 15 90 4 12 113 5 8 113 6 9 76 7 7 76 8 9 110 9 5 105 10 18 167 11 9 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 110 48 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 254 36 plFiberPlate : adding spectro-photo std with objId = 2247 0 4 254 33 plFiberPlate : adding spectro-photo std with objId = 2247 0 2 266 68 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 264 43 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 119 16 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 257 63 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 125 44 plFiberPlate : 137 possible sky positions to use as objects from a possible 589. plFiberPlate : 76 possible sky positions to use as objects from a possible 588. plFiberPlate : 45 possible sky positions to use as objects from a possible 587. plFiberPlate : 64 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 34 possible sky positions to use as objects from a possible 583. plFiberPlate : 72 possible sky positions to use as objects from a possible 582. plFiberPlate : 63 possible sky positions to use as objects from a possible 581. plFiberPlate : 35 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 25 possible sky positions to use as objects from a possible 578. plFiberPlate : 1 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 48 possible sky positions to use as objects from a possible 573. plFiberPlate : 41 possible sky positions to use as objects from a possible 572. plFiberPlate : 30 possible sky positions to use as objects from a possible 571. plFiberPlate : 24 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 3 possible sky positions to use as objects from a possible 568. plFiberPlate : 14 possible sky positions to use as objects from a possible 567. plFiberPlate : 15 possible sky positions to use as objects from a possible 566. plFiberPlate : 32 possible sky positions to use as objects from a possible 565. plFiberPlate : 58 possible sky positions to use as objects from a possible 564. plFiberPlate : 25 possible sky positions to use as objects from a possible 563. plFiberPlate : 19 possible sky positions to use as objects from a possible 562. plFiberPlate : 13 possible sky positions to use as objects from a possible 561. plFiberPlate : 8 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 20 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0850.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0851.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0851.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0852.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 124 2 11 112 3 14 92 4 6 102 5 8 120 6 1 78 7 8 76 8 13 110 9 3 122 10 15 161 11 9 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 126 61 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 127 6 plFiberPlate : adding spectro-photo std with objId = 2247 0 5 274 4 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 279 36 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 274 55 plFiberPlate : adding spectro-photo std with objId = 2247 0 2 281 48 plFiberPlate : adding spectro-photo std with objId = 2247 0 2 266 68 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 125 44 plFiberPlate : 122 possible sky positions to use as objects from a possible 598. plFiberPlate : 87 possible sky positions to use as objects from a possible 597. plFiberPlate : 55 possible sky positions to use as objects from a possible 596. plFiberPlate : 25 possible sky positions to use as objects from a possible 595. plFiberPlate : 47 possible sky positions to use as objects from a possible 594. plFiberPlate : 31 possible sky positions to use as objects from a possible 593. plFiberPlate : 35 possible sky positions to use as objects from a possible 592. plFiberPlate : 83 possible sky positions to use as objects from a possible 591. plFiberPlate : 49 possible sky positions to use as objects from a possible 590. plFiberPlate : 46 possible sky positions to use as objects from a possible 589. plFiberPlate : 32 possible sky positions to use as objects from a possible 588. plFiberPlate : 19 possible sky positions to use as objects from a possible 587. plFiberPlate : 29 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 69 possible sky positions to use as objects from a possible 582. plFiberPlate : 40 possible sky positions to use as objects from a possible 581. plFiberPlate : 29 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 19 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 51 possible sky positions to use as objects from a possible 573. plFiberPlate : 46 possible sky positions to use as objects from a possible 572. plFiberPlate : 29 possible sky positions to use as objects from a possible 571. plFiberPlate : 20 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 19 possible sky positions to use as objects from a possible 568. plFiberPlate : 13 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0851.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0852.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0852.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0853.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 108 2 9 85 3 11 83 4 19 101 5 10 121 6 7 77 7 7 64 8 17 95 9 18 99 10 21 131 11 10 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 142 36 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 146 48 plFiberPlate : adding spectro-photo std with objId = 2247 0 2 281 48 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 147 36 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 287 41 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 142 35 plFiberPlate : adding spectro-photo std with objId = 2190 1 6 151 43 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 282 42 plFiberPlate : 103 possible sky positions to use as objects from a possible 534. plFiberPlate : 64 possible sky positions to use as objects from a possible 533. plFiberPlate : 26 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 23 possible sky positions to use as objects from a possible 530. plFiberPlate : 24 possible sky positions to use as objects from a possible 529. plFiberPlate : 37 possible sky positions to use as objects from a possible 528. plFiberPlate : 80 possible sky positions to use as objects from a possible 527. plFiberPlate : 38 possible sky positions to use as objects from a possible 526. plFiberPlate : 34 possible sky positions to use as objects from a possible 525. plFiberPlate : 25 possible sky positions to use as objects from a possible 524. plFiberPlate : 20 possible sky positions to use as objects from a possible 523. plFiberPlate : 20 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 12 possible sky positions to use as objects from a possible 520. plFiberPlate : 19 possible sky positions to use as objects from a possible 519. plFiberPlate : 72 possible sky positions to use as objects from a possible 518. plFiberPlate : 55 possible sky positions to use as objects from a possible 517. plFiberPlate : 31 possible sky positions to use as objects from a possible 516. plFiberPlate : 20 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 14 possible sky positions to use as objects from a possible 512. plFiberPlate : 20 possible sky positions to use as objects from a possible 511. plFiberPlate : 16 possible sky positions to use as objects from a possible 510. plFiberPlate : 36 possible sky positions to use as objects from a possible 509. plFiberPlate : 29 possible sky positions to use as objects from a possible 508. plFiberPlate : 16 possible sky positions to use as objects from a possible 507. plFiberPlate : 11 possible sky positions to use as objects from a possible 506. plFiberPlate : 9 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 9 possible sky positions to use as objects from a possible 503. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0852.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0853.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0853.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0854.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 145 2 18 112 3 19 92 4 16 103 5 14 122 6 7 73 7 8 64 8 10 97 9 15 102 10 27 151 11 19 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2247 0 3 298 39 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 161 10 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 308 24 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 307 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 158 8 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 160 27 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 159 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 163 55 plFiberPlate : 110 possible sky positions to use as objects from a possible 569. plFiberPlate : 77 possible sky positions to use as objects from a possible 568. plFiberPlate : 42 possible sky positions to use as objects from a possible 567. plFiberPlate : 44 possible sky positions to use as objects from a possible 566. plFiberPlate : 43 possible sky positions to use as objects from a possible 565. plFiberPlate : 26 possible sky positions to use as objects from a possible 564. plFiberPlate : 44 possible sky positions to use as objects from a possible 563. plFiberPlate : 71 possible sky positions to use as objects from a possible 562. plFiberPlate : 48 possible sky positions to use as objects from a possible 561. plFiberPlate : 26 possible sky positions to use as objects from a possible 560. plFiberPlate : 16 possible sky positions to use as objects from a possible 559. plFiberPlate : 9 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 14 possible sky positions to use as objects from a possible 556. plFiberPlate : 33 possible sky positions to use as objects from a possible 555. plFiberPlate : 43 possible sky positions to use as objects from a possible 554. plFiberPlate : 72 possible sky positions to use as objects from a possible 553. plFiberPlate : 45 possible sky positions to use as objects from a possible 552. plFiberPlate : 25 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 5 possible sky positions to use as objects from a possible 549. plFiberPlate : 15 possible sky positions to use as objects from a possible 548. plFiberPlate : 18 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 18 possible sky positions to use as objects from a possible 545. plFiberPlate : 54 possible sky positions to use as objects from a possible 544. plFiberPlate : 31 possible sky positions to use as objects from a possible 543. plFiberPlate : 14 possible sky positions to use as objects from a possible 542. plFiberPlate : 6 possible sky positions to use as objects from a possible 541. plFiberPlate : 9 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0853.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0854.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0854.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0855.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 135 2 11 105 3 8 106 4 10 126 5 14 115 6 11 59 7 7 50 8 8 95 9 18 88 10 17 170 11 17 125 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 180 2 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 171 21 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 320 38 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 307 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 178 43 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 315 100 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 178 81 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 163 55 plFiberPlate : 140 possible sky positions to use as objects from a possible 581. plFiberPlate : 84 possible sky positions to use as objects from a possible 580. plFiberPlate : 39 possible sky positions to use as objects from a possible 579. plFiberPlate : 24 possible sky positions to use as objects from a possible 578. plFiberPlate : 36 possible sky positions to use as objects from a possible 577. plFiberPlate : 39 possible sky positions to use as objects from a possible 576. plFiberPlate : 56 possible sky positions to use as objects from a possible 575. plFiberPlate : 100 possible sky positions to use as objects from a possible 574. plFiberPlate : 75 possible sky positions to use as objects from a possible 573. plFiberPlate : 38 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 13 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 28 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 23 possible sky positions to use as objects from a possible 566. plFiberPlate : 52 possible sky positions to use as objects from a possible 565. plFiberPlate : 31 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 5 possible sky positions to use as objects from a possible 562. plFiberPlate : 4 possible sky positions to use as objects from a possible 561. plFiberPlate : 3 possible sky positions to use as objects from a possible 560. plFiberPlate : 3 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 12 possible sky positions to use as objects from a possible 557. plFiberPlate : 41 possible sky positions to use as objects from a possible 556. plFiberPlate : 11 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : 3 possible sky positions to use as objects from a possible 553. plFiberPlate : 14 possible sky positions to use as objects from a possible 552. plFiberPlate : 9 possible sky positions to use as objects from a possible 551. plFiberPlate : 3 possible sky positions to use as objects from a possible 550. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0854.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0855.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0855.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.3/plPlugMapP-0856.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 131 2 18 90 3 12 96 4 20 123 5 11 124 6 5 64 7 5 52 8 19 103 9 10 102 10 29 153 11 14 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 189 14 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 180 2 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 179 39 plFiberPlate : adding spectro-photo std with objId = 2247 0 1 320 38 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 178 43 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 329 6 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 178 81 plFiberPlate : adding spectro-photo std with objId = 2247 0 6 326 31 plFiberPlate : 124 possible sky positions to use as objects from a possible 579. plFiberPlate : 99 possible sky positions to use as objects from a possible 578. plFiberPlate : 22 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 51 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 91 possible sky positions to use as objects from a possible 572. plFiberPlate : 46 possible sky positions to use as objects from a possible 571. plFiberPlate : 30 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 7 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 5 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 35 possible sky positions to use as objects from a possible 564. plFiberPlate : 74 possible sky positions to use as objects from a possible 563. plFiberPlate : 63 possible sky positions to use as objects from a possible 562. plFiberPlate : 60 possible sky positions to use as objects from a possible 561. plFiberPlate : 38 possible sky positions to use as objects from a possible 560. plFiberPlate : 6 possible sky positions to use as objects from a possible 559. plFiberPlate : 13 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 3 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 37 possible sky positions to use as objects from a possible 554. plFiberPlate : 23 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 6 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 6 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0855.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0856.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.3/plOverlay-0856.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Jan 18 15:34:36 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_51/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_51 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_4/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 12 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0845.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0845.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0845.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0846.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0846.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0846.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0847.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2451,-5.9730) and (11.76,-4.57) plMakeFanucCodes : fixed path between (-10.1235,7.4645) and (-11.66,5.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0847.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0847.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0848.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0848.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0848.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0849.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0849.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.2371,-7.9877) and (12.10,2.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0849.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0850.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0850.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0850.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0851.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1199,-7.0128) and (-11.71,-5.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0851.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0851.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0852.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0852.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0852.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0853.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0853.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0853.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0854.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1705,-3.7909) and (12.50,-1.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0854.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0854.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0855.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0855.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0855.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0856.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5580,-7.1742) and (-11.27,-5.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0856.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.3/plFanuc-0856.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Jan 18 15:35:11 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_51/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_51 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_4/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e28668 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 12 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 845 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 846 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 847 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 848 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 849 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 850 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 851 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 852 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 853 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 854 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 855 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 856 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Jan 18 15:35:28 CST 2002 Begin running plateEnder dr2002.01.3 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_51/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_51 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_4/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.01.3 -morePipes 1 failed. PS: Read file for stderr output of this job.