Sender: LSF System Subject: Job 43876: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Feb 11 17:18:04 2002 Results reported at Mon Feb 11 17:27:38 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v12_1 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.02.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 309.67 sec. Max Memory : 8 MB Max Swap : 31 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Mon Feb 11 17:18:10 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Feb 11 17:18:19 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/encp/v2_15/OSF1-V4:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/dp/v12_1/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_7/OSF1/bin:/sdss/ups/prd/sdssmath/v5_4/OSF1/bin:/sdss/ups/prd/astrotools/v5_6/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Mon Feb 11 17:18:19 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_6/OSF1 DERVISH_DIR=/sdss/ups/prd/dervish/v8_7/OSF1 DP_DIR=/sdss/ups/prd/dp/v12_1/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_15/OSF1-V4 FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_7/OSF1/doc/www/dervish.home.html KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_8_5/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_4/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Mon Feb 11 17:18:19 CST 2002 Begin running plate --------------------------------------------------------------- Mon Feb 11 17:18:19 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_1/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_1/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e2e5e8 makePlates : beginning loop over plObs chain; makePlates : making 17 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0643.par makePlates : plateInfo struct for plate 872 : (h2).mjd 52355 (h2).raCen 148.5163 (h2).decCen 46.24553 (h2).haCen -13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 148.516 46.246 148.516 47.746 plMakePlateFromTile : mjd of obs : 52355.582856 Observed HA/dec of plate center, fiducial point (deg) : -13.002 46.233 -13.003 47.733 The rotation angle of the fid. point is 138.941868 plMakePlateFromTile : beginning loop over 1167 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0644.par makePlates : plateInfo struct for plate 873 : (h2).mjd 52355 (h2).raCen 151.681 (h2).decCen 47.38436 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.681 47.384 151.681 48.884 plMakePlateFromTile : mjd of obs : 52355.583309 Observed HA/dec of plate center, fiducial point (deg) : -16.002 47.372 -16.003 48.871 The rotation angle of the fid. point is 134.532065 plMakePlateFromTile : beginning loop over 1192 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0645.par makePlates : plateInfo struct for plate 874 : (h2).mjd 52355 (h2).raCen 154.6627 (h2).decCen 48.3114 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.663 48.311 154.663 49.811 plMakePlateFromTile : mjd of obs : 52355.583254 Observed HA/dec of plate center, fiducial point (deg) : -19.002 48.298 -19.003 49.798 The rotation angle of the fid. point is 130.449016 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0646.par makePlates : plateInfo struct for plate 875 : (h2).mjd 52355 (h2).raCen 156.88 (h2).decCen 48.92158 (h2).haCen -6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.880 48.922 156.880 50.422 plMakePlateFromTile : mjd of obs : 52355.625423 Observed HA/dec of plate center, fiducial point (deg) : -6.002 48.907 -6.003 50.407 The rotation angle of the fid. point is 162.239294 plMakePlateFromTile : beginning loop over 1224 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0647.par makePlates : plateInfo struct for plate 876 : (h2).mjd 52355 (h2).raCen 159.7106 (h2).decCen 49.63998 (h2).haCen -9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.711 49.640 159.711 51.140 plMakePlateFromTile : mjd of obs : 52355.624950 Observed HA/dec of plate center, fiducial point (deg) : -9.002 49.625 -9.003 51.125 The rotation angle of the fid. point is 154.991477 plMakePlateFromTile : beginning loop over 1212 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0648.par makePlates : plateInfo struct for plate 877 : (h2).mjd 52355 (h2).raCen 162.9104 (h2).decCen 50.35074 (h2).haCen -12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.910 50.351 162.910 51.851 plMakePlateFromTile : mjd of obs : 52355.625499 Observed HA/dec of plate center, fiducial point (deg) : -12.002 50.336 -12.003 51.835 The rotation angle of the fid. point is 148.700744 plMakePlateFromTile : beginning loop over 1230 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0649.par makePlates : plateInfo struct for plate 878 : (h2).mjd 52355 (h2).raCen 165.8942 (h2).decCen 50.9193 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.894 50.919 165.894 52.419 plMakePlateFromTile : mjd of obs : 52355.625450 Observed HA/dec of plate center, fiducial point (deg) : -15.002 50.904 -15.003 52.403 The rotation angle of the fid. point is 143.006865 plMakePlateFromTile : beginning loop over 1224 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0650.par makePlates : plateInfo struct for plate 879 : (h2).mjd 52355 (h2).raCen 168.9186 (h2).decCen 51.40511 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.919 51.405 168.919 52.905 plMakePlateFromTile : mjd of obs : 52355.625512 Observed HA/dec of plate center, fiducial point (deg) : -18.002 51.389 -18.002 52.889 The rotation angle of the fid. point is 137.841559 plMakePlateFromTile : beginning loop over 1216 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (12.71, 298.95, 8.0) and (12.98, 298.23, 6.5) checkLTHo : distance = 0.770, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(12.71, 298.95, 8.0) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0651.par makePlates : plateInfo struct for plate 880 : (h2).mjd 52355 (h2).raCen 171.998 (h2).decCen 51.69609 (h2).haCen 38 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.998 51.696 171.998 53.196 plMakePlateFromTile : mjd of obs : 52355.789240 Observed HA/dec of plate center, fiducial point (deg) : 37.998 51.681 37.997 53.181 The rotation angle of the fid. point is -109.556197 plMakePlateFromTile : beginning loop over 1242 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0652.par makePlates : plateInfo struct for plate 881 : (h2).mjd 52355 (h2).raCen 174.9092 (h2).decCen 52.06734 (h2).haCen 35 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.909 52.067 174.909 53.567 plMakePlateFromTile : mjd of obs : 52355.788989 Observed HA/dec of plate center, fiducial point (deg) : 34.998 52.052 34.997 53.551 The rotation angle of the fid. point is -113.525534 plMakePlateFromTile : beginning loop over 1252 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0653.par makePlates : plateInfo struct for plate 882 : (h2).mjd 52355 (h2).raCen 177.7177 (h2).decCen 52.26513 (h2).haCen 32 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.718 52.265 177.718 53.765 plMakePlateFromTile : mjd of obs : 52355.788453 Observed HA/dec of plate center, fiducial point (deg) : 31.998 52.249 31.997 53.749 The rotation angle of the fid. point is -117.516833 plMakePlateFromTile : beginning loop over 1237 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0654.par makePlates : plateInfo struct for plate 883 : (h2).mjd 52355 (h2).raCen 180.1121 (h2).decCen 52.32329 (h2).haCen 44 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.112 52.323 180.112 53.823 plMakePlateFromTile : mjd of obs : 52355.828344 Observed HA/dec of plate center, fiducial point (deg) : 43.998 52.308 43.997 53.808 The rotation angle of the fid. point is -104.154612 plMakePlateFromTile : beginning loop over 1237 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (171.95, -83.84, 7.6) and (172.49, -83.86, 8.3) checkLTHo : distance = 0.538, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(172.49, -83.86, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0655.par makePlates : plateInfo struct for plate 884 : (h2).mjd 52355 (h2).raCen 183.2055 (h2).decCen 52.44861 (h2).haCen 41 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.206 52.449 183.206 53.949 plMakePlateFromTile : mjd of obs : 52355.828596 Observed HA/dec of plate center, fiducial point (deg) : 40.998 52.433 40.997 53.933 The rotation angle of the fid. point is -107.378360 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-243.44, -109.71, 7.6) and (-242.90, -109.74, 8.3) checkLTHo : distance = 0.539, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-242.90, -109.74, 8.3) checkLTHo : collision between LIGHT_TRAPs (-44.06, 211.98, 8.1) and (-44.58, 211.37, 8.2) checkLTHo : distance = 0.801, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-44.58, 211.37, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0656.par makePlates : plateInfo struct for plate 885 : (h2).mjd 52355 (h2).raCen 186.4522 (h2).decCen 52.46839 (h2).haCen 38 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.452 52.468 186.452 53.968 plMakePlateFromTile : mjd of obs : 52355.829273 Observed HA/dec of plate center, fiducial point (deg) : 37.998 52.452 37.997 53.952 The rotation angle of the fid. point is -110.655028 plMakePlateFromTile : beginning loop over 1213 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0657.par makePlates : plateInfo struct for plate 886 : (h2).mjd 52355 (h2).raCen 189.8623 (h2).decCen 52.39109 (h2).haCen 35 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.862 52.391 189.862 53.891 plMakePlateFromTile : mjd of obs : 52355.830403 Observed HA/dec of plate center, fiducial point (deg) : 34.998 52.374 34.997 53.874 The rotation angle of the fid. point is -114.005740 plMakePlateFromTile : beginning loop over 1249 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0658.par makePlates : plateInfo struct for plate 887 : (h2).mjd 52355 (h2).raCen 193.1932 (h2).decCen 52.19063 (h2).haCen 31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.193 52.191 193.193 53.691 plMakePlateFromTile : mjd of obs : 52355.828541 Observed HA/dec of plate center, fiducial point (deg) : 30.998 52.173 30.997 53.673 The rotation angle of the fid. point is -118.699269 plMakePlateFromTile : beginning loop over 1252 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0659.par makePlates : plateInfo struct for plate 888 : (h2).mjd 52355 (h2).raCen 196.5854 (h2).decCen 51.88515 (h2).haCen 43 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.585 51.885 196.585 53.385 plMakePlateFromTile : mjd of obs : 52355.871194 Observed HA/dec of plate center, fiducial point (deg) : 42.998 51.869 42.997 53.369 The rotation angle of the fid. point is -104.583761 plMakePlateFromTile : beginning loop over 1171 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Feb 11 17:19:37 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_1/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_1/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 17 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0872.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 83 2 3 57 3 4 81 4 6 97 5 0 95 6 1 75 7 2 89 8 9 114 9 7 116 10 11 144 11 7 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 265 16 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 41 36 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 265 72 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 46 45 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 261 15 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 255 12 plFiberPlate : adding coherent-sky number 267 in place of spectro-photo std plFiberPlate : adding coherent-sky number 91 in place of spectro-photo std plFiberPlate : 105 possible sky positions to use as objects from a possible 519. plFiberPlate : 81 possible sky positions to use as objects from a possible 518. plFiberPlate : 69 possible sky positions to use as objects from a possible 517. plFiberPlate : 43 possible sky positions to use as objects from a possible 516. plFiberPlate : 40 possible sky positions to use as objects from a possible 515. plFiberPlate : 26 possible sky positions to use as objects from a possible 514. plFiberPlate : 32 possible sky positions to use as objects from a possible 513. plFiberPlate : 59 possible sky positions to use as objects from a possible 512. plFiberPlate : 33 possible sky positions to use as objects from a possible 511. plFiberPlate : 25 possible sky positions to use as objects from a possible 510. plFiberPlate : 16 possible sky positions to use as objects from a possible 509. plFiberPlate : 12 possible sky positions to use as objects from a possible 508. plFiberPlate : 9 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 17 possible sky positions to use as objects from a possible 505. plFiberPlate : 4 possible sky positions to use as objects from a possible 504. plFiberPlate : 62 possible sky positions to use as objects from a possible 503. plFiberPlate : 37 possible sky positions to use as objects from a possible 502. plFiberPlate : 31 possible sky positions to use as objects from a possible 501. plFiberPlate : 29 possible sky positions to use as objects from a possible 500. plFiberPlate : 8 possible sky positions to use as objects from a possible 499. plFiberPlate : 11 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 32 possible sky positions to use as objects from a possible 495. plFiberPlate : 35 possible sky positions to use as objects from a possible 494. plFiberPlate : 33 possible sky positions to use as objects from a possible 493. plFiberPlate : 22 possible sky positions to use as objects from a possible 492. plFiberPlate : 18 possible sky positions to use as objects from a possible 491. plFiberPlate : 19 possible sky positions to use as objects from a possible 490. plFiberPlate : 15 possible sky positions to use as objects from a possible 489. plFiberPlate : 26 possible sky positions to use as objects from a possible 488. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0872.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0872.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0873.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 95 2 3 56 3 7 79 4 11 107 5 2 116 6 4 83 7 3 98 8 8 115 9 3 115 10 13 139 11 3 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 272 9 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 274 63 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 269 35 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 62 30 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 46 45 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 277 64 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 51 12 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 269 12 plFiberPlate : 129 possible sky positions to use as objects from a possible 535. plFiberPlate : 65 possible sky positions to use as objects from a possible 534. plFiberPlate : 38 possible sky positions to use as objects from a possible 533. plFiberPlate : 23 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 31 possible sky positions to use as objects from a possible 530. plFiberPlate : 40 possible sky positions to use as objects from a possible 529. plFiberPlate : 61 possible sky positions to use as objects from a possible 528. plFiberPlate : 46 possible sky positions to use as objects from a possible 527. plFiberPlate : 25 possible sky positions to use as objects from a possible 526. plFiberPlate : 6 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 20 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 74 possible sky positions to use as objects from a possible 519. plFiberPlate : 62 possible sky positions to use as objects from a possible 518. plFiberPlate : 34 possible sky positions to use as objects from a possible 517. plFiberPlate : 23 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 27 possible sky positions to use as objects from a possible 512. plFiberPlate : 11 possible sky positions to use as objects from a possible 511. plFiberPlate : 36 possible sky positions to use as objects from a possible 510. plFiberPlate : 31 possible sky positions to use as objects from a possible 509. plFiberPlate : 23 possible sky positions to use as objects from a possible 508. plFiberPlate : 17 possible sky positions to use as objects from a possible 507. plFiberPlate : 10 possible sky positions to use as objects from a possible 506. plFiberPlate : 22 possible sky positions to use as objects from a possible 505. plFiberPlate : 25 possible sky positions to use as objects from a possible 504. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0872.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0873.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0873.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0874.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 94 2 10 63 3 9 85 4 13 129 5 9 126 6 9 73 7 11 88 8 10 111 9 11 106 10 19 154 11 12 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 294 37 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 294 53 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 284 22 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 74 34 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 72 76 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 62 30 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 68 17 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 71 4 plFiberPlate : 144 possible sky positions to use as objects from a possible 570. plFiberPlate : 74 possible sky positions to use as objects from a possible 569. plFiberPlate : 55 possible sky positions to use as objects from a possible 568. plFiberPlate : 33 possible sky positions to use as objects from a possible 567. plFiberPlate : 24 possible sky positions to use as objects from a possible 566. plFiberPlate : 32 possible sky positions to use as objects from a possible 565. plFiberPlate : 42 possible sky positions to use as objects from a possible 564. plFiberPlate : 84 possible sky positions to use as objects from a possible 563. plFiberPlate : 47 possible sky positions to use as objects from a possible 562. plFiberPlate : 20 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 11 possible sky positions to use as objects from a possible 559. plFiberPlate : 8 possible sky positions to use as objects from a possible 558. plFiberPlate : 9 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 6 possible sky positions to use as objects from a possible 555. plFiberPlate : 56 possible sky positions to use as objects from a possible 554. plFiberPlate : 39 possible sky positions to use as objects from a possible 553. plFiberPlate : 12 possible sky positions to use as objects from a possible 552. plFiberPlate : 8 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 17 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : 23 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 35 possible sky positions to use as objects from a possible 545. plFiberPlate : 15 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 19 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 18 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0873.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0874.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0874.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0875.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 104 2 4 56 3 6 79 4 6 112 5 13 111 6 9 62 7 11 85 8 13 114 9 10 106 10 12 146 11 8 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 299 26 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 292 24 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 74 34 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 71 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 72 76 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 82 18 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 303 14 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 301 20 plFiberPlate : 127 possible sky positions to use as objects from a possible 551. plFiberPlate : 102 possible sky positions to use as objects from a possible 550. plFiberPlate : 55 possible sky positions to use as objects from a possible 549. plFiberPlate : 40 possible sky positions to use as objects from a possible 548. plFiberPlate : 16 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 59 possible sky positions to use as objects from a possible 545. plFiberPlate : 86 possible sky positions to use as objects from a possible 544. plFiberPlate : 64 possible sky positions to use as objects from a possible 543. plFiberPlate : 48 possible sky positions to use as objects from a possible 542. plFiberPlate : 25 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 6 possible sky positions to use as objects from a possible 539. plFiberPlate : 14 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 104 possible sky positions to use as objects from a possible 535. plFiberPlate : 76 possible sky positions to use as objects from a possible 534. plFiberPlate : 44 possible sky positions to use as objects from a possible 533. plFiberPlate : 34 possible sky positions to use as objects from a possible 532. plFiberPlate : 11 possible sky positions to use as objects from a possible 531. plFiberPlate : 4 possible sky positions to use as objects from a possible 530. plFiberPlate : 6 possible sky positions to use as objects from a possible 529. plFiberPlate : 30 possible sky positions to use as objects from a possible 528. plFiberPlate : 44 possible sky positions to use as objects from a possible 527. plFiberPlate : 30 possible sky positions to use as objects from a possible 526. plFiberPlate : 17 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 7 possible sky positions to use as objects from a possible 523. plFiberPlate : 4 possible sky positions to use as objects from a possible 522. plFiberPlate : 25 possible sky positions to use as objects from a possible 521. plFiberPlate : 31 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0874.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0875.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0875.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0876.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 106 2 9 53 3 4 63 4 9 95 5 5 100 6 7 68 7 5 103 8 2 128 9 7 100 10 15 140 11 18 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 95 25 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 100 36 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 313 44 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 319 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 322 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 314 34 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 312 31 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 313 81 plFiberPlate : 108 possible sky positions to use as objects from a possible 540. plFiberPlate : 76 possible sky positions to use as objects from a possible 539. plFiberPlate : 69 possible sky positions to use as objects from a possible 538. plFiberPlate : 45 possible sky positions to use as objects from a possible 537. plFiberPlate : 20 possible sky positions to use as objects from a possible 536. plFiberPlate : 31 possible sky positions to use as objects from a possible 535. plFiberPlate : 66 possible sky positions to use as objects from a possible 534. plFiberPlate : 84 possible sky positions to use as objects from a possible 533. plFiberPlate : 53 possible sky positions to use as objects from a possible 532. plFiberPlate : 24 possible sky positions to use as objects from a possible 531. plFiberPlate : 25 possible sky positions to use as objects from a possible 530. plFiberPlate : 25 possible sky positions to use as objects from a possible 529. plFiberPlate : 9 possible sky positions to use as objects from a possible 528. plFiberPlate : 25 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 23 possible sky positions to use as objects from a possible 525. plFiberPlate : 68 possible sky positions to use as objects from a possible 524. plFiberPlate : 48 possible sky positions to use as objects from a possible 523. plFiberPlate : 34 possible sky positions to use as objects from a possible 522. plFiberPlate : 8 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : 5 possible sky positions to use as objects from a possible 519. plFiberPlate : 7 possible sky positions to use as objects from a possible 518. plFiberPlate : 25 possible sky positions to use as objects from a possible 517. plFiberPlate : 36 possible sky positions to use as objects from a possible 516. plFiberPlate : 20 possible sky positions to use as objects from a possible 515. plFiberPlate : 23 possible sky positions to use as objects from a possible 514. plFiberPlate : 14 possible sky positions to use as objects from a possible 513. plFiberPlate : 19 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 7 possible sky positions to use as objects from a possible 510. plFiberPlate : 36 possible sky positions to use as objects from a possible 509. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0875.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0876.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0876.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0877.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 110 2 8 60 3 10 84 4 6 128 5 6 117 6 5 69 7 1 94 8 5 113 9 3 114 10 18 150 11 11 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 102 26 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 100 34 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 332 46 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 332 14 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 113 47 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 332 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 322 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 324 53 plFiberPlate : 129 possible sky positions to use as objects from a possible 569. plFiberPlate : 66 possible sky positions to use as objects from a possible 568. plFiberPlate : 27 possible sky positions to use as objects from a possible 567. plFiberPlate : 30 possible sky positions to use as objects from a possible 566. plFiberPlate : 25 possible sky positions to use as objects from a possible 565. plFiberPlate : 13 possible sky positions to use as objects from a possible 564. plFiberPlate : 32 possible sky positions to use as objects from a possible 563. plFiberPlate : 85 possible sky positions to use as objects from a possible 562. plFiberPlate : 25 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : 8 possible sky positions to use as objects from a possible 559. plFiberPlate : 31 possible sky positions to use as objects from a possible 558. plFiberPlate : 14 possible sky positions to use as objects from a possible 557. plFiberPlate : 14 possible sky positions to use as objects from a possible 556. plFiberPlate : 7 possible sky positions to use as objects from a possible 555. plFiberPlate : 11 possible sky positions to use as objects from a possible 554. plFiberPlate : 61 possible sky positions to use as objects from a possible 553. plFiberPlate : 38 possible sky positions to use as objects from a possible 552. plFiberPlate : 23 possible sky positions to use as objects from a possible 551. plFiberPlate : 17 possible sky positions to use as objects from a possible 550. plFiberPlate : 9 possible sky positions to use as objects from a possible 549. plFiberPlate : 14 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 25 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 40 possible sky positions to use as objects from a possible 544. plFiberPlate : 26 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 18 possible sky positions to use as objects from a possible 541. plFiberPlate : 18 possible sky positions to use as objects from a possible 540. plFiberPlate : 17 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0876.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0877.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0877.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0878.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 108 2 6 71 3 10 81 4 13 120 5 5 113 6 6 75 7 3 90 8 7 122 9 5 103 10 14 137 11 8 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 339 80 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 332 46 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 116 32 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 124 30 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 332 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 341 8 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 337 37 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 335 22 plFiberPlate : 123 possible sky positions to use as objects from a possible 564. plFiberPlate : 72 possible sky positions to use as objects from a possible 563. plFiberPlate : 44 possible sky positions to use as objects from a possible 562. plFiberPlate : 9 possible sky positions to use as objects from a possible 561. plFiberPlate : 19 possible sky positions to use as objects from a possible 560. plFiberPlate : 28 possible sky positions to use as objects from a possible 559. plFiberPlate : 52 possible sky positions to use as objects from a possible 558. plFiberPlate : 85 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 12 possible sky positions to use as objects from a possible 555. plFiberPlate : 4 possible sky positions to use as objects from a possible 554. plFiberPlate : 12 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 21 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 26 possible sky positions to use as objects from a possible 549. plFiberPlate : 51 possible sky positions to use as objects from a possible 548. plFiberPlate : 44 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 9 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 7 possible sky positions to use as objects from a possible 543. plFiberPlate : 11 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 24 possible sky positions to use as objects from a possible 540. plFiberPlate : 54 possible sky positions to use as objects from a possible 539. plFiberPlate : 41 possible sky positions to use as objects from a possible 538. plFiberPlate : 30 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 21 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 37 possible sky positions to use as objects from a possible 533. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0877.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0878.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0878.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0879.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 113 2 10 65 3 3 81 4 9 124 5 5 126 6 3 72 7 3 70 8 5 110 9 2 103 10 9 143 11 12 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 352 60 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 357 6 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 141 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 352 9 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 362 48 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 138 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 356 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 351 2 plFiberPlate : 131 possible sky positions to use as objects from a possible 558. plFiberPlate : 64 possible sky positions to use as objects from a possible 557. plFiberPlate : 28 possible sky positions to use as objects from a possible 556. plFiberPlate : 24 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 17 possible sky positions to use as objects from a possible 553. plFiberPlate : 55 possible sky positions to use as objects from a possible 552. plFiberPlate : 101 possible sky positions to use as objects from a possible 551. plFiberPlate : 76 possible sky positions to use as objects from a possible 550. plFiberPlate : 27 possible sky positions to use as objects from a possible 549. plFiberPlate : 14 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 20 possible sky positions to use as objects from a possible 545. plFiberPlate : 31 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 90 possible sky positions to use as objects from a possible 542. plFiberPlate : 58 possible sky positions to use as objects from a possible 541. plFiberPlate : 19 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 2 possible sky positions to use as objects from a possible 537. plFiberPlate : 5 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 36 possible sky positions to use as objects from a possible 534. plFiberPlate : 38 possible sky positions to use as objects from a possible 533. plFiberPlate : 27 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 12 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0878.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0879.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0879.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0880.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 106 2 5 63 3 9 76 4 8 116 5 9 117 6 8 87 7 1 102 8 3 127 9 4 119 10 9 137 11 6 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 151 29 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 362 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 357 6 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 366 6 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 141 10 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 145 13 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 362 48 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 145 18 plFiberPlate : 142 possible sky positions to use as objects from a possible 584. plFiberPlate : 76 possible sky positions to use as objects from a possible 583. plFiberPlate : 52 possible sky positions to use as objects from a possible 582. plFiberPlate : 23 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 28 possible sky positions to use as objects from a possible 579. plFiberPlate : 48 possible sky positions to use as objects from a possible 578. plFiberPlate : 81 possible sky positions to use as objects from a possible 577. plFiberPlate : 52 possible sky positions to use as objects from a possible 576. plFiberPlate : 29 possible sky positions to use as objects from a possible 575. plFiberPlate : 9 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 6 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : 54 possible sky positions to use as objects from a possible 568. plFiberPlate : 46 possible sky positions to use as objects from a possible 567. plFiberPlate : 33 possible sky positions to use as objects from a possible 566. plFiberPlate : 13 possible sky positions to use as objects from a possible 565. plFiberPlate : 9 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : 68 possible sky positions to use as objects from a possible 559. plFiberPlate : 47 possible sky positions to use as objects from a possible 558. plFiberPlate : 31 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : 15 possible sky positions to use as objects from a possible 555. plFiberPlate : 30 possible sky positions to use as objects from a possible 554. plFiberPlate : 33 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0879.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0880.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0880.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0881.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 111 2 10 71 3 5 78 4 6 121 5 3 137 6 5 71 7 7 83 8 9 108 9 8 110 10 16 151 11 12 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 161 37 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 385 12 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 383 21 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 389 2 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 166 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 377 46 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 387 48 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 383 26 plFiberPlate : 128 possible sky positions to use as objects from a possible 584. plFiberPlate : 50 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 26 possible sky positions to use as objects from a possible 581. plFiberPlate : 29 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 32 possible sky positions to use as objects from a possible 578. plFiberPlate : 95 possible sky positions to use as objects from a possible 577. plFiberPlate : 60 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 21 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 97 possible sky positions to use as objects from a possible 568. plFiberPlate : 40 possible sky positions to use as objects from a possible 567. plFiberPlate : 21 possible sky positions to use as objects from a possible 566. plFiberPlate : 13 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 19 possible sky positions to use as objects from a possible 563. plFiberPlate : 14 possible sky positions to use as objects from a possible 562. plFiberPlate : 12 possible sky positions to use as objects from a possible 561. plFiberPlate : 12 possible sky positions to use as objects from a possible 560. plFiberPlate : 36 possible sky positions to use as objects from a possible 559. plFiberPlate : 28 possible sky positions to use as objects from a possible 558. plFiberPlate : 14 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 9 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : 16 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0880.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0881.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0881.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0882.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 141 2 9 74 3 10 71 4 15 111 5 4 118 6 1 72 7 1 73 8 1 110 9 2 109 10 17 142 11 14 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 172 20 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 389 2 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 166 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 389 13 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 387 48 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 383 26 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 397 27 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 167 9 plFiberPlate : 114 possible sky positions to use as objects from a possible 575. plFiberPlate : 81 possible sky positions to use as objects from a possible 574. plFiberPlate : 40 possible sky positions to use as objects from a possible 573. plFiberPlate : 27 possible sky positions to use as objects from a possible 572. plFiberPlate : 23 possible sky positions to use as objects from a possible 571. plFiberPlate : 23 possible sky positions to use as objects from a possible 570. plFiberPlate : 77 possible sky positions to use as objects from a possible 569. plFiberPlate : 89 possible sky positions to use as objects from a possible 568. plFiberPlate : 55 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 15 possible sky positions to use as objects from a possible 565. plFiberPlate : 16 possible sky positions to use as objects from a possible 564. plFiberPlate : 19 possible sky positions to use as objects from a possible 563. plFiberPlate : 24 possible sky positions to use as objects from a possible 562. plFiberPlate : 34 possible sky positions to use as objects from a possible 561. plFiberPlate : 19 possible sky positions to use as objects from a possible 560. plFiberPlate : 66 possible sky positions to use as objects from a possible 559. plFiberPlate : 54 possible sky positions to use as objects from a possible 558. plFiberPlate : 27 possible sky positions to use as objects from a possible 557. plFiberPlate : 21 possible sky positions to use as objects from a possible 556. plFiberPlate : 26 possible sky positions to use as objects from a possible 555. plFiberPlate : 16 possible sky positions to use as objects from a possible 554. plFiberPlate : 9 possible sky positions to use as objects from a possible 553. plFiberPlate : 12 possible sky positions to use as objects from a possible 552. plFiberPlate : 19 possible sky positions to use as objects from a possible 551. plFiberPlate : 43 possible sky positions to use as objects from a possible 550. plFiberPlate : 14 possible sky positions to use as objects from a possible 549. plFiberPlate : 4 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 8 possible sky positions to use as objects from a possible 546. plFiberPlate : 6 possible sky positions to use as objects from a possible 545. plFiberPlate : 24 possible sky positions to use as objects from a possible 544. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0881.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0882.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0882.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0883.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 105 2 5 56 3 15 78 4 13 119 5 6 136 6 5 79 7 6 88 8 4 127 9 4 107 10 18 134 11 5 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 183 27 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 177 8 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 186 11 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 404 42 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 188 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 401 22 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 397 27 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 406 2 plFiberPlate : 131 possible sky positions to use as objects from a possible 575. plFiberPlate : 39 possible sky positions to use as objects from a possible 574. plFiberPlate : 13 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 9 possible sky positions to use as objects from a possible 570. plFiberPlate : 41 possible sky positions to use as objects from a possible 569. plFiberPlate : 91 possible sky positions to use as objects from a possible 568. plFiberPlate : 68 possible sky positions to use as objects from a possible 567. plFiberPlate : 34 possible sky positions to use as objects from a possible 566. plFiberPlate : 3 possible sky positions to use as objects from a possible 565. plFiberPlate : 12 possible sky positions to use as objects from a possible 564. plFiberPlate : 6 possible sky positions to use as objects from a possible 563. plFiberPlate : 8 possible sky positions to use as objects from a possible 562. plFiberPlate : 26 possible sky positions to use as objects from a possible 561. plFiberPlate : 21 possible sky positions to use as objects from a possible 560. plFiberPlate : 87 possible sky positions to use as objects from a possible 559. plFiberPlate : 48 possible sky positions to use as objects from a possible 558. plFiberPlate : 34 possible sky positions to use as objects from a possible 557. plFiberPlate : 14 possible sky positions to use as objects from a possible 556. plFiberPlate : 6 possible sky positions to use as objects from a possible 555. plFiberPlate : 7 possible sky positions to use as objects from a possible 554. plFiberPlate : 16 possible sky positions to use as objects from a possible 553. plFiberPlate : 25 possible sky positions to use as objects from a possible 552. plFiberPlate : 27 possible sky positions to use as objects from a possible 551. plFiberPlate : 64 possible sky positions to use as objects from a possible 550. plFiberPlate : 26 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 7 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0882.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0883.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0883.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0884.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 112 2 6 75 3 5 68 4 9 112 5 5 139 6 7 75 7 4 90 8 5 110 9 8 109 10 11 147 11 10 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 192 43 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 411 24 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 418 65 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 197 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 188 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 406 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 415 33 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 189 26 plFiberPlate : 126 possible sky positions to use as objects from a possible 570. plFiberPlate : 86 possible sky positions to use as objects from a possible 569. plFiberPlate : 62 possible sky positions to use as objects from a possible 568. plFiberPlate : 13 possible sky positions to use as objects from a possible 567. plFiberPlate : 34 possible sky positions to use as objects from a possible 566. plFiberPlate : 21 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 78 possible sky positions to use as objects from a possible 563. plFiberPlate : 86 possible sky positions to use as objects from a possible 562. plFiberPlate : 57 possible sky positions to use as objects from a possible 561. plFiberPlate : 32 possible sky positions to use as objects from a possible 560. plFiberPlate : 20 possible sky positions to use as objects from a possible 559. plFiberPlate : 16 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 94 possible sky positions to use as objects from a possible 554. plFiberPlate : 75 possible sky positions to use as objects from a possible 553. plFiberPlate : 27 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 2 possible sky positions to use as objects from a possible 550. plFiberPlate : 10 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 19 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 41 possible sky positions to use as objects from a possible 545. plFiberPlate : 21 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 20 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0883.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0884.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0884.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0885.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 104 2 7 59 3 10 72 4 13 109 5 6 133 6 5 88 7 7 63 8 9 97 9 5 105 10 10 133 11 7 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 420 35 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 426 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 434 41 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 202 25 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 214 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 436 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 430 56 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 426 62 plFiberPlate : 123 possible sky positions to use as objects from a possible 537. plFiberPlate : 71 possible sky positions to use as objects from a possible 536. plFiberPlate : 42 possible sky positions to use as objects from a possible 535. plFiberPlate : 16 possible sky positions to use as objects from a possible 534. plFiberPlate : 22 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 26 possible sky positions to use as objects from a possible 531. plFiberPlate : 85 possible sky positions to use as objects from a possible 530. plFiberPlate : 39 possible sky positions to use as objects from a possible 529. plFiberPlate : 23 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 8 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 4 possible sky positions to use as objects from a possible 524. plFiberPlate : 23 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 74 possible sky positions to use as objects from a possible 521. plFiberPlate : 48 possible sky positions to use as objects from a possible 520. plFiberPlate : 29 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 12 possible sky positions to use as objects from a possible 517. plFiberPlate : 10 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 9 possible sky positions to use as objects from a possible 514. plFiberPlate : 14 possible sky positions to use as objects from a possible 513. plFiberPlate : 57 possible sky positions to use as objects from a possible 512. plFiberPlate : 27 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 8 possible sky positions to use as objects from a possible 509. plFiberPlate : 7 possible sky positions to use as objects from a possible 508. plFiberPlate : 6 possible sky positions to use as objects from a possible 507. plFiberPlate : 19 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0884.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0885.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0885.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0886.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 127 2 8 76 3 5 69 4 9 110 5 10 126 6 8 88 7 9 70 8 12 103 9 11 108 10 15 140 11 10 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 219 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 439 2 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 214 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 436 41 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 439 46 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 430 56 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 444 22 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 228 2 plFiberPlate : 112 possible sky positions to use as objects from a possible 562. plFiberPlate : 62 possible sky positions to use as objects from a possible 561. plFiberPlate : 37 possible sky positions to use as objects from a possible 560. plFiberPlate : 24 possible sky positions to use as objects from a possible 559. plFiberPlate : 33 possible sky positions to use as objects from a possible 558. plFiberPlate : 28 possible sky positions to use as objects from a possible 557. plFiberPlate : 51 possible sky positions to use as objects from a possible 556. plFiberPlate : 78 possible sky positions to use as objects from a possible 555. plFiberPlate : 55 possible sky positions to use as objects from a possible 554. plFiberPlate : 29 possible sky positions to use as objects from a possible 553. plFiberPlate : 25 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 29 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 33 possible sky positions to use as objects from a possible 548. plFiberPlate : 17 possible sky positions to use as objects from a possible 547. plFiberPlate : 75 possible sky positions to use as objects from a possible 546. plFiberPlate : 54 possible sky positions to use as objects from a possible 545. plFiberPlate : 39 possible sky positions to use as objects from a possible 544. plFiberPlate : 17 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 9 possible sky positions to use as objects from a possible 540. plFiberPlate : 23 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : 32 possible sky positions to use as objects from a possible 537. plFiberPlate : 29 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 6 possible sky positions to use as objects from a possible 534. plFiberPlate : 4 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : 10 possible sky positions to use as objects from a possible 531. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0885.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0886.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0886.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0887.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 113 2 12 65 3 8 72 4 15 110 5 15 121 6 12 82 7 5 69 8 8 113 9 11 107 10 20 146 11 20 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 460 17 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 452 8 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 454 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 444 22 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 237 16 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 228 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 450 20 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 231 2 plFiberPlate : 113 possible sky positions to use as objects from a possible 546. plFiberPlate : 76 possible sky positions to use as objects from a possible 545. plFiberPlate : 40 possible sky positions to use as objects from a possible 544. plFiberPlate : 31 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 22 possible sky positions to use as objects from a possible 541. plFiberPlate : 28 possible sky positions to use as objects from a possible 540. plFiberPlate : 94 possible sky positions to use as objects from a possible 539. plFiberPlate : 62 possible sky positions to use as objects from a possible 538. plFiberPlate : 42 possible sky positions to use as objects from a possible 537. plFiberPlate : 24 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 12 possible sky positions to use as objects from a possible 533. plFiberPlate : 24 possible sky positions to use as objects from a possible 532. plFiberPlate : 24 possible sky positions to use as objects from a possible 531. plFiberPlate : 97 possible sky positions to use as objects from a possible 530. plFiberPlate : 47 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 8 possible sky positions to use as objects from a possible 524. plFiberPlate : 20 possible sky positions to use as objects from a possible 523. plFiberPlate : 19 possible sky positions to use as objects from a possible 522. plFiberPlate : 47 possible sky positions to use as objects from a possible 521. plFiberPlate : 28 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 13 possible sky positions to use as objects from a possible 518. plFiberPlate : 3 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 13 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0886.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0887.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0887.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0888.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 69 2 13 61 3 4 51 4 11 104 5 16 134 6 8 89 7 10 66 8 8 66 9 11 109 10 21 131 11 22 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 469 36 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 470 26 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 464 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 467 31 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 465 55 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 473 23 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 466 35 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 248 8 plFiberPlate : 103 possible sky positions to use as objects from a possible 484. plFiberPlate : 65 possible sky positions to use as objects from a possible 483. plFiberPlate : 40 possible sky positions to use as objects from a possible 482. plFiberPlate : 18 possible sky positions to use as objects from a possible 481. plFiberPlate : 37 possible sky positions to use as objects from a possible 480. plFiberPlate : 30 possible sky positions to use as objects from a possible 479. plFiberPlate : 12 possible sky positions to use as objects from a possible 478. plFiberPlate : 89 possible sky positions to use as objects from a possible 477. plFiberPlate : 38 possible sky positions to use as objects from a possible 476. plFiberPlate : 26 possible sky positions to use as objects from a possible 475. plFiberPlate : 22 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 17 possible sky positions to use as objects from a possible 472. plFiberPlate : 15 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 12 possible sky positions to use as objects from a possible 469. plFiberPlate : 104 possible sky positions to use as objects from a possible 468. plFiberPlate : 53 possible sky positions to use as objects from a possible 467. plFiberPlate : 28 possible sky positions to use as objects from a possible 466. plFiberPlate : 18 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : 6 possible sky positions to use as objects from a possible 463. plFiberPlate : 12 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 50 possible sky positions to use as objects from a possible 459. plFiberPlate : 40 possible sky positions to use as objects from a possible 458. plFiberPlate : 23 possible sky positions to use as objects from a possible 457. plFiberPlate : 13 possible sky positions to use as objects from a possible 456. plFiberPlate : 19 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 5 possible sky positions to use as objects from a possible 453. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0887.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0888.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0888.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Feb 11 17:21:02 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_1/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_1/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 17 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0872.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0872.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0872.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0873.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0873.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0873.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0874.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0874.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0874.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0875.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.1586,-6.2507) and (-11.56,-5.50) plMakeFanucCodes : fixed path between (11.2559,5.4889) and (12.17,2.70) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0875.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0875.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0876.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0876.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0876.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0877.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.4370,2.9833) and (12.56,0.97) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0877.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.9038,4.0291) and (-1.29,12.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0877.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0878.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0878.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0878.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0879.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0879.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0879.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0880.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.4171,11.1202) and (4.17,12.07) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0880.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0880.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0881.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.9947,9.1043) and (10.85,6.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0881.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0881.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0882.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0882.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0882.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0883.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0883.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0883.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0884.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0884.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0884.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0885.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0885.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0885.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0886.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0886.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0886.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0887.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0887.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0887.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0888.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0888.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0888.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Feb 11 17:22:44 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_1/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_1/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e2e768 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 17 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 872 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 873 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 874 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 875 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 876 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 877 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 878 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 879 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 880 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 881 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 882 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 883 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 884 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 885 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 886 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 887 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 888 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Feb 11 17:24:15 CST 2002 Begin running plateEnder dr2002.02.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_1/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_1/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.02.1 -morePipes 1 failed. PS: Read file for stderr output of this job.