Sender: LSF System Subject: Job 44316: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Feb 18 14:45:03 2002 Results reported at Mon Feb 18 14:49:01 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v12_3 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.02.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 215.98 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Feb 18 14:45:05 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Feb 18 14:45:06 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/encp/v2_15/OSF1-V4:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/dp/v12_3/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_7/OSF1/bin:/sdss/ups/prd/sdssmath/v5_4/OSF1/bin:/sdss/ups/prd/astrotools/v5_6/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Mon Feb 18 14:45:06 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_6/OSF1 DERVISH_DIR=/sdss/ups/prd/dervish/v8_7/OSF1 DP_DIR=/sdss/ups/prd/dp/v12_3/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_15/OSF1-V4 FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_7/OSF1/doc/www/dervish.home.html KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_8_5/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_4/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Mon Feb 18 14:45:06 CST 2002 Begin running plate --------------------------------------------------------------- Mon Feb 18 14:45:06 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_3/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_3/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e404e8 makePlates : beginning loop over plObs chain; makePlates : making 16 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0644.par makePlates : plateInfo struct for plate 872 : (h2).mjd 52355 (h2).raCen 151.6662 (h2).decCen 47.35891 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.666 47.359 151.666 48.859 plMakePlateFromTile : mjd of obs : 52355.541698 Observed HA/dec of plate center, fiducial point (deg) : -31.002 47.347 -31.002 48.847 The rotation angle of the fid. point is 110.650076 plMakePlateFromTile : beginning loop over 1193 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0645.par makePlates : plateInfo struct for plate 873 : (h2).mjd 52355 (h2).raCen 154.7584 (h2).decCen 48.28243 (h2).haCen -34 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.758 48.282 154.758 49.782 plMakePlateFromTile : mjd of obs : 52355.541949 Observed HA/dec of plate center, fiducial point (deg) : -34.002 48.270 -34.002 49.770 The rotation angle of the fid. point is 108.771560 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0646.par makePlates : plateInfo struct for plate 874 : (h2).mjd 52355 (h2).raCen 156.8957 (h2).decCen 48.89837 (h2).haCen -36 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.896 48.898 156.896 50.398 plMakePlateFromTile : mjd of obs : 52355.542326 Observed HA/dec of plate center, fiducial point (deg) : -36.002 48.886 -36.002 50.386 The rotation angle of the fid. point is 107.563137 plMakePlateFromTile : beginning loop over 1218 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0647.par makePlates : plateInfo struct for plate 875 : (h2).mjd 52355 (h2).raCen 159.7406 (h2).decCen 49.67245 (h2).haCen -39 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.741 49.672 159.741 51.172 plMakePlateFromTile : mjd of obs : 52355.541892 Observed HA/dec of plate center, fiducial point (deg) : -39.002 49.660 -39.002 51.159 The rotation angle of the fid. point is 105.577693 plMakePlateFromTile : beginning loop over 1212 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0648.par makePlates : plateInfo struct for plate 876 : (h2).mjd 52355 (h2).raCen 162.9108 (h2).decCen 50.35102 (h2).haCen -27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.911 50.351 162.911 51.851 plMakePlateFromTile : mjd of obs : 52355.583930 Observed HA/dec of plate center, fiducial point (deg) : -27.002 50.337 -27.002 51.836 The rotation angle of the fid. point is 121.191721 plMakePlateFromTile : beginning loop over 1226 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0649.par makePlates : plateInfo struct for plate 877 : (h2).mjd 52355 (h2).raCen 165.8936 (h2).decCen 50.91944 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.894 50.919 165.894 52.419 plMakePlateFromTile : mjd of obs : 52355.583877 Observed HA/dec of plate center, fiducial point (deg) : -30.002 50.905 -30.002 52.404 The rotation angle of the fid. point is 118.012064 plMakePlateFromTile : beginning loop over 1221 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0650.par makePlates : plateInfo struct for plate 878 : (h2).mjd 52355 (h2).raCen 168.9429 (h2).decCen 51.41579 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.943 51.416 168.943 52.916 plMakePlateFromTile : mjd of obs : 52355.625580 Observed HA/dec of plate center, fiducial point (deg) : -18.002 51.400 -18.002 52.899 The rotation angle of the fid. point is 137.858612 plMakePlateFromTile : beginning loop over 1215 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (9.51, 296.60, 8.0) and (9.77, 295.88, 6.5) checkLTHo : distance = 0.770, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(9.51, 296.60, 8.0) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0651.par makePlates : plateInfo struct for plate 879 : (h2).mjd 52355 (h2).raCen 172.0958 (h2).decCen 51.73742 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.096 51.737 172.096 53.237 plMakePlateFromTile : mjd of obs : 52355.623227 Observed HA/dec of plate center, fiducial point (deg) : -22.002 51.721 -22.002 53.221 The rotation angle of the fid. point is 131.281236 plMakePlateFromTile : beginning loop over 1223 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0652.par makePlates : plateInfo struct for plate 880 : (h2).mjd 52355 (h2).raCen 174.9593 (h2).decCen 52.08904 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.959 52.089 174.959 53.589 plMakePlateFromTile : mjd of obs : 52355.625614 Observed HA/dec of plate center, fiducial point (deg) : -24.002 52.073 -24.002 53.572 The rotation angle of the fid. point is 128.602586 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0653.par makePlates : plateInfo struct for plate 881 : (h2).mjd 52355 (h2).raCen 177.7372 (h2).decCen 52.24158 (h2).haCen -27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.737 52.242 177.737 53.742 plMakePlateFromTile : mjd of obs : 52355.624994 Observed HA/dec of plate center, fiducial point (deg) : -27.002 52.225 -27.002 53.725 The rotation angle of the fid. point is 124.303501 plMakePlateFromTile : beginning loop over 1240 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0654.par makePlates : plateInfo struct for plate 882 : (h2).mjd 52355 (h2).raCen 180.4293 (h2).decCen 52.42566 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.429 52.426 180.429 53.926 plMakePlateFromTile : mjd of obs : 52355.624135 Observed HA/dec of plate center, fiducial point (deg) : -30.002 52.409 -30.002 53.909 The rotation angle of the fid. point is 120.396001 plMakePlateFromTile : beginning loop over 1256 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (129.36, -106.80, 7.6) and (129.89, -106.81, 8.3) checkLTHo : distance = 0.538, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(129.89, -106.81, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0655.par makePlates : plateInfo struct for plate 883 : (h2).mjd 52355 (h2).raCen 183.2119 (h2).decCen 52.42762 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.212 52.428 183.212 53.928 plMakePlateFromTile : mjd of obs : 52355.787041 Observed HA/dec of plate center, fiducial point (deg) : 25.998 52.411 25.997 53.910 The rotation angle of the fid. point is -126.061848 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-244.32, -105.11, 7.6) and (-243.78, -105.14, 8.3) checkLTHo : distance = 0.539, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-243.78, -105.14, 8.3) checkLTHo : collision between LIGHT_TRAPs (-44.89, 216.56, 8.1) and (-45.42, 215.95, 8.2) checkLTHo : distance = 0.801, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-45.42, 215.95, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0656.par makePlates : plateInfo struct for plate 884 : (h2).mjd 52355 (h2).raCen 186.5197 (h2).decCen 52.48921 (h2).haCen 38 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.520 52.489 186.520 53.989 plMakePlateFromTile : mjd of obs : 52355.829460 Observed HA/dec of plate center, fiducial point (deg) : 37.998 52.473 37.997 53.973 The rotation angle of the fid. point is -110.684337 plMakePlateFromTile : beginning loop over 1211 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0657.par makePlates : plateInfo struct for plate 885 : (h2).mjd 52355 (h2).raCen 189.9027 (h2).decCen 52.4103 (h2).haCen 35 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.903 52.410 189.903 53.910 plMakePlateFromTile : mjd of obs : 52355.830515 Observed HA/dec of plate center, fiducial point (deg) : 34.998 52.394 34.997 53.893 The rotation angle of the fid. point is -114.033942 plMakePlateFromTile : beginning loop over 1261 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0658.par makePlates : plateInfo struct for plate 886 : (h2).mjd 52355 (h2).raCen 193.1937 (h2).decCen 52.19054 (h2).haCen 31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.194 52.191 193.194 53.691 plMakePlateFromTile : mjd of obs : 52355.828543 Observed HA/dec of plate center, fiducial point (deg) : 30.998 52.173 30.997 53.673 The rotation angle of the fid. point is -118.699130 plMakePlateFromTile : beginning loop over 1257 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk34/complete//plPlugMapT-0659.par makePlates : plateInfo struct for plate 887 : (h2).mjd 52355 (h2).raCen 196.5854 (h2).decCen 51.88515 (h2).haCen 43 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.585 51.885 196.585 53.385 plMakePlateFromTile : mjd of obs : 52355.871194 Observed HA/dec of plate center, fiducial point (deg) : 42.998 51.869 42.997 53.369 The rotation angle of the fid. point is -104.583761 plMakePlateFromTile : beginning loop over 1158 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Feb 18 14:45:49 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_3/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_3/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 16 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0872.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 90 2 3 52 3 7 75 4 10 112 5 2 119 6 4 87 7 3 101 8 9 113 9 4 114 10 14 141 11 3 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 272 9 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 274 63 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 269 35 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 62 30 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 46 45 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 277 64 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 51 12 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 269 12 plFiberPlate : 132 possible sky positions to use as objects from a possible 535. plFiberPlate : 70 possible sky positions to use as objects from a possible 534. plFiberPlate : 49 possible sky positions to use as objects from a possible 533. plFiberPlate : 23 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 28 possible sky positions to use as objects from a possible 530. plFiberPlate : 40 possible sky positions to use as objects from a possible 529. plFiberPlate : 74 possible sky positions to use as objects from a possible 528. plFiberPlate : 41 possible sky positions to use as objects from a possible 527. plFiberPlate : 20 possible sky positions to use as objects from a possible 526. plFiberPlate : 5 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 15 possible sky positions to use as objects from a possible 521. plFiberPlate : 6 possible sky positions to use as objects from a possible 520. plFiberPlate : 56 possible sky positions to use as objects from a possible 519. plFiberPlate : 66 possible sky positions to use as objects from a possible 518. plFiberPlate : 33 possible sky positions to use as objects from a possible 517. plFiberPlate : 24 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 16 possible sky positions to use as objects from a possible 513. plFiberPlate : 23 possible sky positions to use as objects from a possible 512. plFiberPlate : 15 possible sky positions to use as objects from a possible 511. plFiberPlate : 50 possible sky positions to use as objects from a possible 510. plFiberPlate : 36 possible sky positions to use as objects from a possible 509. plFiberPlate : 24 possible sky positions to use as objects from a possible 508. plFiberPlate : 21 possible sky positions to use as objects from a possible 507. plFiberPlate : 6 possible sky positions to use as objects from a possible 506. plFiberPlate : 21 possible sky positions to use as objects from a possible 505. plFiberPlate : 23 possible sky positions to use as objects from a possible 504. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0872.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0872.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0873.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 89 2 7 63 3 9 82 4 14 117 5 8 132 6 10 78 7 12 89 8 11 117 9 9 109 10 17 150 11 11 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 294 53 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 292 24 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 284 22 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 74 34 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 72 76 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 62 30 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 68 17 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 71 4 plFiberPlate : 134 possible sky positions to use as objects from a possible 571. plFiberPlate : 73 possible sky positions to use as objects from a possible 570. plFiberPlate : 54 possible sky positions to use as objects from a possible 569. plFiberPlate : 42 possible sky positions to use as objects from a possible 568. plFiberPlate : 18 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 39 possible sky positions to use as objects from a possible 565. plFiberPlate : 81 possible sky positions to use as objects from a possible 564. plFiberPlate : 36 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 7 possible sky positions to use as objects from a possible 561. plFiberPlate : 8 possible sky positions to use as objects from a possible 560. plFiberPlate : 7 possible sky positions to use as objects from a possible 559. plFiberPlate : 12 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 11 possible sky positions to use as objects from a possible 556. plFiberPlate : 67 possible sky positions to use as objects from a possible 555. plFiberPlate : 38 possible sky positions to use as objects from a possible 554. plFiberPlate : 11 possible sky positions to use as objects from a possible 553. plFiberPlate : 6 possible sky positions to use as objects from a possible 552. plFiberPlate : 13 possible sky positions to use as objects from a possible 551. plFiberPlate : 6 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 22 possible sky positions to use as objects from a possible 548. plFiberPlate : 14 possible sky positions to use as objects from a possible 547. plFiberPlate : 41 possible sky positions to use as objects from a possible 546. plFiberPlate : 25 possible sky positions to use as objects from a possible 545. plFiberPlate : 15 possible sky positions to use as objects from a possible 544. plFiberPlate : 12 possible sky positions to use as objects from a possible 543. plFiberPlate : 13 possible sky positions to use as objects from a possible 542. plFiberPlate : 16 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0872.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0873.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0873.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0874.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 102 2 4 51 3 5 83 4 6 119 5 12 112 6 9 67 7 8 87 8 11 114 9 10 103 10 11 140 11 7 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 294 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 292 24 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 71 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 72 76 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 82 18 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 82 18 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 303 14 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 301 20 plFiberPlate : 111 possible sky positions to use as objects from a possible 549. plFiberPlate : 107 possible sky positions to use as objects from a possible 548. plFiberPlate : 63 possible sky positions to use as objects from a possible 547. plFiberPlate : 28 possible sky positions to use as objects from a possible 546. plFiberPlate : 21 possible sky positions to use as objects from a possible 545. plFiberPlate : 31 possible sky positions to use as objects from a possible 544. plFiberPlate : 52 possible sky positions to use as objects from a possible 543. plFiberPlate : 81 possible sky positions to use as objects from a possible 542. plFiberPlate : 50 possible sky positions to use as objects from a possible 541. plFiberPlate : 44 possible sky positions to use as objects from a possible 540. plFiberPlate : 18 possible sky positions to use as objects from a possible 539. plFiberPlate : 10 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 19 possible sky positions to use as objects from a possible 534. plFiberPlate : 95 possible sky positions to use as objects from a possible 533. plFiberPlate : 69 possible sky positions to use as objects from a possible 532. plFiberPlate : 42 possible sky positions to use as objects from a possible 531. plFiberPlate : 33 possible sky positions to use as objects from a possible 530. plFiberPlate : 9 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 8 possible sky positions to use as objects from a possible 527. plFiberPlate : 35 possible sky positions to use as objects from a possible 526. plFiberPlate : 38 possible sky positions to use as objects from a possible 525. plFiberPlate : 30 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 13 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 5 possible sky positions to use as objects from a possible 520. plFiberPlate : 27 possible sky positions to use as objects from a possible 519. plFiberPlate : 24 possible sky positions to use as objects from a possible 518. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0873.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0874.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0874.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0875.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 115 2 9 53 3 5 61 4 10 96 5 7 92 6 6 63 7 4 102 8 3 128 9 7 97 10 14 139 11 16 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 95 25 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 100 36 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 313 44 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 319 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 314 34 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 322 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 312 31 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 313 81 plFiberPlate : 106 possible sky positions to use as objects from a possible 537. plFiberPlate : 79 possible sky positions to use as objects from a possible 536. plFiberPlate : 66 possible sky positions to use as objects from a possible 535. plFiberPlate : 34 possible sky positions to use as objects from a possible 534. plFiberPlate : 19 possible sky positions to use as objects from a possible 533. plFiberPlate : 33 possible sky positions to use as objects from a possible 532. plFiberPlate : 86 possible sky positions to use as objects from a possible 531. plFiberPlate : 83 possible sky positions to use as objects from a possible 530. plFiberPlate : 55 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 26 possible sky positions to use as objects from a possible 527. plFiberPlate : 26 possible sky positions to use as objects from a possible 526. plFiberPlate : 16 possible sky positions to use as objects from a possible 525. plFiberPlate : 22 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 28 possible sky positions to use as objects from a possible 522. plFiberPlate : 59 possible sky positions to use as objects from a possible 521. plFiberPlate : 50 possible sky positions to use as objects from a possible 520. plFiberPlate : 35 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 24 possible sky positions to use as objects from a possible 514. plFiberPlate : 48 possible sky positions to use as objects from a possible 513. plFiberPlate : 20 possible sky positions to use as objects from a possible 512. plFiberPlate : 19 possible sky positions to use as objects from a possible 511. plFiberPlate : 18 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 16 possible sky positions to use as objects from a possible 508. plFiberPlate : 10 possible sky positions to use as objects from a possible 507. plFiberPlate : 30 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0874.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0875.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0875.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0876.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 115 2 8 61 3 10 79 4 6 115 5 7 113 6 5 70 7 1 95 8 6 113 9 3 117 10 18 150 11 11 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 102 26 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 100 34 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 332 14 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 319 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 332 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 322 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 337 37 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 324 53 plFiberPlate : 114 possible sky positions to use as objects from a possible 561. plFiberPlate : 79 possible sky positions to use as objects from a possible 560. plFiberPlate : 40 possible sky positions to use as objects from a possible 559. plFiberPlate : 25 possible sky positions to use as objects from a possible 558. plFiberPlate : 20 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 45 possible sky positions to use as objects from a possible 555. plFiberPlate : 85 possible sky positions to use as objects from a possible 554. plFiberPlate : 37 possible sky positions to use as objects from a possible 553. plFiberPlate : 19 possible sky positions to use as objects from a possible 552. plFiberPlate : 8 possible sky positions to use as objects from a possible 551. plFiberPlate : 24 possible sky positions to use as objects from a possible 550. plFiberPlate : 15 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 13 possible sky positions to use as objects from a possible 546. plFiberPlate : 63 possible sky positions to use as objects from a possible 545. plFiberPlate : 39 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 14 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 24 possible sky positions to use as objects from a possible 538. plFiberPlate : 11 possible sky positions to use as objects from a possible 537. plFiberPlate : 40 possible sky positions to use as objects from a possible 536. plFiberPlate : 26 possible sky positions to use as objects from a possible 535. plFiberPlate : 19 possible sky positions to use as objects from a possible 534. plFiberPlate : 21 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0875.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0876.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0876.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0877.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 115 2 6 70 3 8 81 4 10 122 5 5 116 6 6 74 7 3 90 8 6 119 9 5 101 10 11 132 11 9 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 339 80 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 344 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 332 46 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 116 32 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 124 30 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 332 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 341 8 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 335 22 plFiberPlate : 126 possible sky positions to use as objects from a possible 565. plFiberPlate : 63 possible sky positions to use as objects from a possible 564. plFiberPlate : 35 possible sky positions to use as objects from a possible 563. plFiberPlate : 11 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : 27 possible sky positions to use as objects from a possible 560. plFiberPlate : 57 possible sky positions to use as objects from a possible 559. plFiberPlate : 90 possible sky positions to use as objects from a possible 558. plFiberPlate : 23 possible sky positions to use as objects from a possible 557. plFiberPlate : 11 possible sky positions to use as objects from a possible 556. plFiberPlate : 5 possible sky positions to use as objects from a possible 555. plFiberPlate : 11 possible sky positions to use as objects from a possible 554. plFiberPlate : 11 possible sky positions to use as objects from a possible 553. plFiberPlate : 29 possible sky positions to use as objects from a possible 552. plFiberPlate : 10 possible sky positions to use as objects from a possible 551. plFiberPlate : 22 possible sky positions to use as objects from a possible 550. plFiberPlate : 67 possible sky positions to use as objects from a possible 549. plFiberPlate : 33 possible sky positions to use as objects from a possible 548. plFiberPlate : 21 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : 34 possible sky positions to use as objects from a possible 541. plFiberPlate : 52 possible sky positions to use as objects from a possible 540. plFiberPlate : 37 possible sky positions to use as objects from a possible 539. plFiberPlate : 31 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 16 possible sky positions to use as objects from a possible 536. plFiberPlate : 19 possible sky positions to use as objects from a possible 535. plFiberPlate : 34 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0876.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0877.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0877.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0878.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 109 2 10 63 3 2 77 4 8 119 5 5 131 6 3 74 7 3 73 8 4 110 9 2 102 10 9 148 11 12 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 352 60 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 357 6 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 141 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 352 9 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 362 48 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 138 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 362 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 351 2 plFiberPlate : 131 possible sky positions to use as objects from a possible 558. plFiberPlate : 75 possible sky positions to use as objects from a possible 557. plFiberPlate : 39 possible sky positions to use as objects from a possible 556. plFiberPlate : 23 possible sky positions to use as objects from a possible 555. plFiberPlate : 30 possible sky positions to use as objects from a possible 554. plFiberPlate : 17 possible sky positions to use as objects from a possible 553. plFiberPlate : 51 possible sky positions to use as objects from a possible 552. plFiberPlate : 108 possible sky positions to use as objects from a possible 551. plFiberPlate : 78 possible sky positions to use as objects from a possible 550. plFiberPlate : 27 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 11 possible sky positions to use as objects from a possible 547. plFiberPlate : 13 possible sky positions to use as objects from a possible 546. plFiberPlate : 15 possible sky positions to use as objects from a possible 545. plFiberPlate : 29 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 89 possible sky positions to use as objects from a possible 542. plFiberPlate : 39 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 21 possible sky positions to use as objects from a possible 539. plFiberPlate : 4 possible sky positions to use as objects from a possible 538. plFiberPlate : 2 possible sky positions to use as objects from a possible 537. plFiberPlate : 3 possible sky positions to use as objects from a possible 536. plFiberPlate : 19 possible sky positions to use as objects from a possible 535. plFiberPlate : 27 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 29 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 24 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0877.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0878.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0878.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0879.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 112 2 5 63 3 7 77 4 6 110 5 9 111 6 7 80 7 1 100 8 3 131 9 3 116 10 7 132 11 6 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 370 49 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 145 18 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 362 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 366 6 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 141 10 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 145 13 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 362 48 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 151 29 plFiberPlate : 119 possible sky positions to use as objects from a possible 568. plFiberPlate : 85 possible sky positions to use as objects from a possible 567. plFiberPlate : 55 possible sky positions to use as objects from a possible 566. plFiberPlate : 24 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 21 possible sky positions to use as objects from a possible 563. plFiberPlate : 74 possible sky positions to use as objects from a possible 562. plFiberPlate : 75 possible sky positions to use as objects from a possible 561. plFiberPlate : 38 possible sky positions to use as objects from a possible 560. plFiberPlate : 29 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 9 possible sky positions to use as objects from a possible 557. plFiberPlate : 5 possible sky positions to use as objects from a possible 556. plFiberPlate : 15 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 53 possible sky positions to use as objects from a possible 552. plFiberPlate : 48 possible sky positions to use as objects from a possible 551. plFiberPlate : 24 possible sky positions to use as objects from a possible 550. plFiberPlate : 11 possible sky positions to use as objects from a possible 549. plFiberPlate : 7 possible sky positions to use as objects from a possible 548. plFiberPlate : 13 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 16 possible sky positions to use as objects from a possible 545. plFiberPlate : 13 possible sky positions to use as objects from a possible 544. plFiberPlate : 58 possible sky positions to use as objects from a possible 543. plFiberPlate : 45 possible sky positions to use as objects from a possible 542. plFiberPlate : 29 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 13 possible sky positions to use as objects from a possible 539. plFiberPlate : 29 possible sky positions to use as objects from a possible 538. plFiberPlate : 30 possible sky positions to use as objects from a possible 537. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0878.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0879.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0879.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0880.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 109 2 11 79 3 7 78 4 5 121 5 1 137 6 5 71 7 6 89 8 6 110 9 8 110 10 15 157 11 12 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 161 37 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 385 12 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 383 21 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 389 2 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 166 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 377 46 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 387 48 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 383 26 plFiberPlate : 114 possible sky positions to use as objects from a possible 587. plFiberPlate : 75 possible sky positions to use as objects from a possible 586. plFiberPlate : 35 possible sky positions to use as objects from a possible 585. plFiberPlate : 27 possible sky positions to use as objects from a possible 584. plFiberPlate : 21 possible sky positions to use as objects from a possible 583. plFiberPlate : 30 possible sky positions to use as objects from a possible 582. plFiberPlate : 35 possible sky positions to use as objects from a possible 581. plFiberPlate : 111 possible sky positions to use as objects from a possible 580. plFiberPlate : 80 possible sky positions to use as objects from a possible 579. plFiberPlate : 41 possible sky positions to use as objects from a possible 578. plFiberPlate : 23 possible sky positions to use as objects from a possible 577. plFiberPlate : 14 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 22 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 97 possible sky positions to use as objects from a possible 571. plFiberPlate : 30 possible sky positions to use as objects from a possible 570. plFiberPlate : 27 possible sky positions to use as objects from a possible 569. plFiberPlate : 11 possible sky positions to use as objects from a possible 568. plFiberPlate : 15 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 11 possible sky positions to use as objects from a possible 563. plFiberPlate : 43 possible sky positions to use as objects from a possible 562. plFiberPlate : 27 possible sky positions to use as objects from a possible 561. plFiberPlate : 12 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 32 possible sky positions to use as objects from a possible 557. plFiberPlate : 14 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0879.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0880.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0880.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0881.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 134 2 8 77 3 10 70 4 15 113 5 5 125 6 1 77 7 1 74 8 2 114 9 2 110 10 15 143 11 12 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 172 20 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 389 13 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 389 2 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 166 25 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 387 48 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 383 26 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 397 27 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 167 9 plFiberPlate : 117 possible sky positions to use as objects from a possible 578. plFiberPlate : 76 possible sky positions to use as objects from a possible 577. plFiberPlate : 42 possible sky positions to use as objects from a possible 576. plFiberPlate : 24 possible sky positions to use as objects from a possible 575. plFiberPlate : 25 possible sky positions to use as objects from a possible 574. plFiberPlate : 25 possible sky positions to use as objects from a possible 573. plFiberPlate : 67 possible sky positions to use as objects from a possible 572. plFiberPlate : 88 possible sky positions to use as objects from a possible 571. plFiberPlate : 60 possible sky positions to use as objects from a possible 570. plFiberPlate : 30 possible sky positions to use as objects from a possible 569. plFiberPlate : 20 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 24 possible sky positions to use as objects from a possible 565. plFiberPlate : 30 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : 83 possible sky positions to use as objects from a possible 562. plFiberPlate : 65 possible sky positions to use as objects from a possible 561. plFiberPlate : 23 possible sky positions to use as objects from a possible 560. plFiberPlate : 15 possible sky positions to use as objects from a possible 559. plFiberPlate : 29 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 15 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : 41 possible sky positions to use as objects from a possible 553. plFiberPlate : 13 possible sky positions to use as objects from a possible 552. plFiberPlate : 4 possible sky positions to use as objects from a possible 551. plFiberPlate : 4 possible sky positions to use as objects from a possible 550. plFiberPlate : 6 possible sky positions to use as objects from a possible 549. plFiberPlate : 7 possible sky positions to use as objects from a possible 548. plFiberPlate : 16 possible sky positions to use as objects from a possible 547. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0880.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0881.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0881.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0882.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 123 2 4 61 3 15 86 4 17 137 5 3 129 6 5 74 7 4 78 8 5 129 9 5 106 10 14 147 11 4 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 183 27 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 186 11 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 404 42 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 173 44 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 188 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 401 22 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 397 27 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 406 2 plFiberPlate : 139 possible sky positions to use as objects from a possible 594. plFiberPlate : 15 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 10 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 43 possible sky positions to use as objects from a possible 588. plFiberPlate : 103 possible sky positions to use as objects from a possible 587. plFiberPlate : 67 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 8 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 35 possible sky positions to use as objects from a possible 580. plFiberPlate : 36 possible sky positions to use as objects from a possible 579. plFiberPlate : 83 possible sky positions to use as objects from a possible 578. plFiberPlate : 73 possible sky positions to use as objects from a possible 577. plFiberPlate : 44 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 17 possible sky positions to use as objects from a possible 571. plFiberPlate : 51 possible sky positions to use as objects from a possible 570. plFiberPlate : 48 possible sky positions to use as objects from a possible 569. plFiberPlate : 24 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 18 possible sky positions to use as objects from a possible 566. plFiberPlate : 10 possible sky positions to use as objects from a possible 565. plFiberPlate : 25 possible sky positions to use as objects from a possible 564. plFiberPlate : 4 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0881.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0882.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0882.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0883.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 119 2 6 76 3 5 70 4 10 105 5 6 140 6 7 74 7 4 89 8 6 110 9 8 106 10 10 140 11 11 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 192 43 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 417 13 plFiberPlate : adding spectro-photo std with objId = 2883 0 3 189 26 plFiberPlate : adding spectro-photo std with objId = 2883 0 2 197 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 188 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 406 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 415 33 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 418 65 plFiberPlate : 118 possible sky positions to use as objects from a possible 568. plFiberPlate : 86 possible sky positions to use as objects from a possible 567. plFiberPlate : 60 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 33 possible sky positions to use as objects from a possible 564. plFiberPlate : 27 possible sky positions to use as objects from a possible 563. plFiberPlate : 46 possible sky positions to use as objects from a possible 562. plFiberPlate : 71 possible sky positions to use as objects from a possible 561. plFiberPlate : 78 possible sky positions to use as objects from a possible 560. plFiberPlate : 53 possible sky positions to use as objects from a possible 559. plFiberPlate : 32 possible sky positions to use as objects from a possible 558. plFiberPlate : 17 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 12 possible sky positions to use as objects from a possible 555. plFiberPlate : 23 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 89 possible sky positions to use as objects from a possible 552. plFiberPlate : 74 possible sky positions to use as objects from a possible 551. plFiberPlate : 52 possible sky positions to use as objects from a possible 550. plFiberPlate : 16 possible sky positions to use as objects from a possible 549. plFiberPlate : 9 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 12 possible sky positions to use as objects from a possible 546. plFiberPlate : 24 possible sky positions to use as objects from a possible 545. plFiberPlate : 17 possible sky positions to use as objects from a possible 544. plFiberPlate : 42 possible sky positions to use as objects from a possible 543. plFiberPlate : 26 possible sky positions to use as objects from a possible 542. plFiberPlate : 19 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 21 possible sky positions to use as objects from a possible 538. plFiberPlate : 23 possible sky positions to use as objects from a possible 537. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0882.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0883.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0883.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0884.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 107 2 7 64 3 9 78 4 10 114 5 4 130 6 4 85 7 6 61 8 7 100 9 5 100 10 11 133 11 6 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 420 35 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 426 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 434 41 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 202 25 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 214 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 436 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 430 56 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 426 62 plFiberPlate : 133 possible sky positions to use as objects from a possible 542. plFiberPlate : 71 possible sky positions to use as objects from a possible 541. plFiberPlate : 41 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 19 possible sky positions to use as objects from a possible 538. plFiberPlate : 13 possible sky positions to use as objects from a possible 537. plFiberPlate : 36 possible sky positions to use as objects from a possible 536. plFiberPlate : 81 possible sky positions to use as objects from a possible 535. plFiberPlate : 45 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 8 possible sky positions to use as objects from a possible 531. plFiberPlate : 8 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 64 possible sky positions to use as objects from a possible 526. plFiberPlate : 52 possible sky positions to use as objects from a possible 525. plFiberPlate : 34 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 14 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 19 possible sky positions to use as objects from a possible 518. plFiberPlate : 55 possible sky positions to use as objects from a possible 517. plFiberPlate : 29 possible sky positions to use as objects from a possible 516. plFiberPlate : 13 possible sky positions to use as objects from a possible 515. plFiberPlate : 6 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 5 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0883.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0884.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0884.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0885.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 126 2 9 79 3 7 71 4 9 104 5 10 130 6 8 88 7 9 69 8 13 109 9 10 111 10 15 142 11 10 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 221 51 plFiberPlate : adding spectro-photo std with objId = 2883 0 1 219 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 439 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 1 436 41 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 439 46 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 430 56 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 444 22 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 228 2 plFiberPlate : 106 possible sky positions to use as objects from a possible 571. plFiberPlate : 68 possible sky positions to use as objects from a possible 570. plFiberPlate : 43 possible sky positions to use as objects from a possible 569. plFiberPlate : 25 possible sky positions to use as objects from a possible 568. plFiberPlate : 34 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 55 possible sky positions to use as objects from a possible 565. plFiberPlate : 88 possible sky positions to use as objects from a possible 564. plFiberPlate : 65 possible sky positions to use as objects from a possible 563. plFiberPlate : 39 possible sky positions to use as objects from a possible 562. plFiberPlate : 30 possible sky positions to use as objects from a possible 561. plFiberPlate : 15 possible sky positions to use as objects from a possible 560. plFiberPlate : 25 possible sky positions to use as objects from a possible 559. plFiberPlate : 21 possible sky positions to use as objects from a possible 558. plFiberPlate : 34 possible sky positions to use as objects from a possible 557. plFiberPlate : 30 possible sky positions to use as objects from a possible 556. plFiberPlate : 70 possible sky positions to use as objects from a possible 555. plFiberPlate : 56 possible sky positions to use as objects from a possible 554. plFiberPlate : 54 possible sky positions to use as objects from a possible 553. plFiberPlate : 32 possible sky positions to use as objects from a possible 552. plFiberPlate : 23 possible sky positions to use as objects from a possible 551. plFiberPlate : 7 possible sky positions to use as objects from a possible 550. plFiberPlate : 9 possible sky positions to use as objects from a possible 549. plFiberPlate : 23 possible sky positions to use as objects from a possible 548. plFiberPlate : 14 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 29 possible sky positions to use as objects from a possible 545. plFiberPlate : 12 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0884.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0885.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0885.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0886.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 120 2 11 68 3 7 79 4 12 117 5 15 124 6 12 80 7 5 66 8 8 112 9 11 107 10 18 147 11 19 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 460 17 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 454 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 452 8 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 444 22 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 237 16 plFiberPlate : adding spectro-photo std with objId = 2883 0 5 228 2 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 450 20 plFiberPlate : adding spectro-photo std with objId = 2883 0 4 231 2 plFiberPlate : 123 possible sky positions to use as objects from a possible 554. plFiberPlate : 80 possible sky positions to use as objects from a possible 553. plFiberPlate : 46 possible sky positions to use as objects from a possible 552. plFiberPlate : 27 possible sky positions to use as objects from a possible 551. plFiberPlate : 17 possible sky positions to use as objects from a possible 550. plFiberPlate : 17 possible sky positions to use as objects from a possible 549. plFiberPlate : 35 possible sky positions to use as objects from a possible 548. plFiberPlate : 98 possible sky positions to use as objects from a possible 547. plFiberPlate : 64 possible sky positions to use as objects from a possible 546. plFiberPlate : 45 possible sky positions to use as objects from a possible 545. plFiberPlate : 36 possible sky positions to use as objects from a possible 544. plFiberPlate : 18 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 29 possible sky positions to use as objects from a possible 540. plFiberPlate : 31 possible sky positions to use as objects from a possible 539. plFiberPlate : 79 possible sky positions to use as objects from a possible 538. plFiberPlate : 40 possible sky positions to use as objects from a possible 537. plFiberPlate : 24 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 11 possible sky positions to use as objects from a possible 533. plFiberPlate : 9 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 17 possible sky positions to use as objects from a possible 530. plFiberPlate : 47 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 3 possible sky positions to use as objects from a possible 525. plFiberPlate : 5 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0885.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0886.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0886.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.02.1/plPlugMapP-0887.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 70 2 13 64 3 4 51 4 8 98 5 15 128 6 8 90 7 10 66 8 8 65 9 12 106 10 21 134 11 21 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 469 36 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 470 26 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 464 10 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 467 31 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 465 55 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 473 23 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 466 35 plFiberPlate : adding spectro-photo std with objId = 2883 0 6 248 8 plFiberPlate : 107 possible sky positions to use as objects from a possible 474. plFiberPlate : 66 possible sky positions to use as objects from a possible 473. plFiberPlate : 41 possible sky positions to use as objects from a possible 472. plFiberPlate : 18 possible sky positions to use as objects from a possible 471. plFiberPlate : 40 possible sky positions to use as objects from a possible 470. plFiberPlate : 32 possible sky positions to use as objects from a possible 469. plFiberPlate : 13 possible sky positions to use as objects from a possible 468. plFiberPlate : 81 possible sky positions to use as objects from a possible 467. plFiberPlate : 54 possible sky positions to use as objects from a possible 466. plFiberPlate : 30 possible sky positions to use as objects from a possible 465. plFiberPlate : 25 possible sky positions to use as objects from a possible 464. plFiberPlate : 18 possible sky positions to use as objects from a possible 463. plFiberPlate : 15 possible sky positions to use as objects from a possible 462. plFiberPlate : 18 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : 13 possible sky positions to use as objects from a possible 459. plFiberPlate : 102 possible sky positions to use as objects from a possible 458. plFiberPlate : 59 possible sky positions to use as objects from a possible 457. plFiberPlate : 27 possible sky positions to use as objects from a possible 456. plFiberPlate : 19 possible sky positions to use as objects from a possible 455. plFiberPlate : 15 possible sky positions to use as objects from a possible 454. plFiberPlate : 9 possible sky positions to use as objects from a possible 453. plFiberPlate : 13 possible sky positions to use as objects from a possible 452. plFiberPlate : 12 possible sky positions to use as objects from a possible 451. plFiberPlate : 9 possible sky positions to use as objects from a possible 450. plFiberPlate : 61 possible sky positions to use as objects from a possible 449. plFiberPlate : 42 possible sky positions to use as objects from a possible 448. plFiberPlate : 22 possible sky positions to use as objects from a possible 447. plFiberPlate : 11 possible sky positions to use as objects from a possible 446. plFiberPlate : 17 possible sky positions to use as objects from a possible 445. plFiberPlate : 8 possible sky positions to use as objects from a possible 444. plFiberPlate : 5 possible sky positions to use as objects from a possible 443. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0886.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0887.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.02.1/plOverlay-0887.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Feb 18 14:46:35 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_3/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_3/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 16 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0872.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0872.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0872.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0873.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5669,5.0541) and (-12.34,3.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0873.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0873.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0874.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0874.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0874.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0875.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0875.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0875.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0876.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.4342,2.9805) and (12.56,0.96) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0876.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.9055,4.0272) and (-1.29,12.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0876.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0877.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0877.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0877.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0878.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0878.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0878.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0879.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0879.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0879.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0880.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.1392,-3.2137) and (-12.61,-2.07) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0880.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0880.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0881.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2046,7.3690) and (-11.17,6.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0881.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0881.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0882.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.4717,7.3579) and (-10.98,6.28) plMakeFanucCodes : fixed path between (-7.2968,-10.4400) and (-5.54,-11.18) plMakeFanucCodes : fixed path between (11.9205,-4.1464) and (12.50,-1.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0882.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0882.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0883.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0883.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0883.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0884.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1840,-7.7126) and (-11.16,-6.14) plMakeFanucCodes : fixed path between (-8.0555,-9.9044) and (-7.34,-10.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0884.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0884.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0885.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0885.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0885.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0886.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0886.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0886.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0887.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0887.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.02.1/plFanuc-0887.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Feb 18 14:47:24 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_3/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_3/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e40668 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 16 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 872 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 873 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 874 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 875 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 876 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 877 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 878 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 879 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 880 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 881 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 882 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 883 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 884 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 885 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 886 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 887 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Feb 18 14:47:48 CST 2002 Begin running plateEnder dr2002.02.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_3/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_3/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_8_5/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.02.1 -morePipes 1 failed. PS: Read file for stderr output of this job.