Sender: LSF System Subject: Job 12063: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Jan 6 16:57:18 2003 Results reported at Mon Jan 6 17:01:32 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_151 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.01.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 230.18 sec. Max Memory : 10 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Jan 6 16:57:20 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Jan 6 16:57:22 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_151/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Mon Jan 6 16:57:22 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_151/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Mon Jan 6 16:57:22 CST 2003 Begin running plate --------------------------------------------------------------- Mon Jan 6 16:57:22 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e44668 makePlates : beginning loop over plObs chain; makePlates : making 17 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0851.par makePlates : plateInfo struct for plate 1203 : (h4).mjd 52691 (h4).raCen 116.6096 (h4).decCen 21.76364 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.610 21.764 116.610 23.264 plMakePlateFromTile : mjd of obs : 52691.538320 Observed HA/dec of plate center, fiducial point (deg) : -26.002 21.761 -26.003 23.261 The rotation angle of the fid. point is 58.878883 plMakePlateFromTile : beginning loop over 1142 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0852.par makePlates : plateInfo struct for plate 1204 : (h4).mjd 52691 (h4).raCen 118.8243 (h4).decCen 23.89511 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.824 23.895 118.824 25.395 plMakePlateFromTile : mjd of obs : 52691.538914 Observed HA/dec of plate center, fiducial point (deg) : -28.002 23.891 -28.003 25.391 The rotation angle of the fid. point is 63.800312 plMakePlateFromTile : beginning loop over 1232 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0853.par makePlates : plateInfo struct for plate 1205 : (h4).mjd 52691 (h4).raCen 121.2833 (h4).decCen 25.70457 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.283 25.705 121.283 27.205 plMakePlateFromTile : mjd of obs : 52691.537415 Observed HA/dec of plate center, fiducial point (deg) : -31.002 25.700 -31.003 27.200 The rotation angle of the fid. point is 67.973376 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0854.par makePlates : plateInfo struct for plate 1206 : (h4).mjd 52691 (h4).raCen 123.5127 (h4).decCen 27.55407 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.513 27.554 123.513 29.054 plMakePlateFromTile : mjd of obs : 52691.538050 Observed HA/dec of plate center, fiducial point (deg) : -33.002 27.549 -33.003 29.048 The rotation angle of the fid. point is 71.437198 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0855.par makePlates : plateInfo struct for plate 1207 : (h4).mjd 52691 (h4).raCen 125.9313 (h4).decCen 29.34391 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.931 29.344 125.931 30.844 plMakePlateFromTile : mjd of obs : 52691.539208 Observed HA/dec of plate center, fiducial point (deg) : -35.002 29.337 -35.003 30.837 The rotation angle of the fid. point is 74.425611 plMakePlateFromTile : beginning loop over 1260 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0856.par makePlates : plateInfo struct for plate 1208 : (h4).mjd 52691 (h4).raCen 128.1371 (h4).decCen 30.88171 (h4).haCen -38 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.137 30.882 128.137 32.382 plMakePlateFromTile : mjd of obs : 52691.537006 Observed HA/dec of plate center, fiducial point (deg) : -38.002 30.875 -38.003 32.374 The rotation angle of the fid. point is 76.467492 plMakePlateFromTile : beginning loop over 1284 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0857.par makePlates : plateInfo struct for plate 1209 : (h4).mjd 52691 (h4).raCen 130.4222 (h4).decCen 32.24909 (h4).haCen -40 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.422 32.249 130.422 33.749 plMakePlateFromTile : mjd of obs : 52691.537795 Observed HA/dec of plate center, fiducial point (deg) : -40.002 32.241 -40.003 33.741 The rotation angle of the fid. point is 78.066654 plMakePlateFromTile : beginning loop over 1221 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0858.par makePlates : plateInfo struct for plate 1210 : (h4).mjd 52691 (h4).raCen 132.6477 (h4).decCen 33.67305 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.648 33.673 132.648 35.173 plMakePlateFromTile : mjd of obs : 52691.621552 Observed HA/dec of plate center, fiducial point (deg) : -12.002 33.662 -12.003 35.162 The rotation angle of the fid. point is 91.724789 plMakePlateFromTile : beginning loop over 1252 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0859.par makePlates : plateInfo struct for plate 1211 : (h4).mjd 52691 (h4).raCen 134.718 (h4).decCen 34.87656 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.718 34.877 134.718 36.377 plMakePlateFromTile : mjd of obs : 52691.621746 Observed HA/dec of plate center, fiducial point (deg) : -14.002 34.865 -14.003 36.365 The rotation angle of the fid. point is 96.217397 plMakePlateFromTile : beginning loop over 1254 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0860.par makePlates : plateInfo struct for plate 1212 : (h4).mjd 52691 (h4).raCen 137.0275 (h4).decCen 36.13862 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.028 36.139 137.028 37.639 plMakePlateFromTile : mjd of obs : 52691.619831 Observed HA/dec of plate center, fiducial point (deg) : -17.002 36.126 -17.003 37.626 The rotation angle of the fid. point is 98.507475 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0861.par makePlates : plateInfo struct for plate 1213 : (h4).mjd 52691 (h4).raCen 139.4943 (h4).decCen 37.31563 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.494 37.316 139.494 38.816 plMakePlateFromTile : mjd of obs : 52691.621122 Observed HA/dec of plate center, fiducial point (deg) : -19.002 37.302 -19.003 38.802 The rotation angle of the fid. point is 100.584840 plMakePlateFromTile : beginning loop over 1230 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0862.par makePlates : plateInfo struct for plate 1214 : (h4).mjd 52691 (h4).raCen 141.9385 (h4).decCen 38.59473 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.939 38.595 141.939 40.095 plMakePlateFromTile : mjd of obs : 52691.622351 Observed HA/dec of plate center, fiducial point (deg) : -21.002 38.581 -21.003 40.080 The rotation angle of the fid. point is 102.411013 plMakePlateFromTile : beginning loop over 1278 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0863.par makePlates : plateInfo struct for plate 1215 : (h4).mjd 52691 (h4).raCen 144.5469 (h4).decCen 39.70271 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.547 39.703 144.547 41.203 plMakePlateFromTile : mjd of obs : 52691.621263 Observed HA/dec of plate center, fiducial point (deg) : -24.002 39.688 -24.003 41.187 The rotation angle of the fid. point is 102.197201 plMakePlateFromTile : beginning loop over 1257 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-117.24, 57.17, 6.8) and (-116.58, 55.86, 8.1) checkLTHo : distance = 1.468, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-116.58, 55.86, 8.1) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0864.par makePlates : plateInfo struct for plate 1216 : (h4).mjd 52691 (h4).raCen 147.4245 (h4).decCen 40.67186 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.424 40.672 147.424 42.172 plMakePlateFromTile : mjd of obs : 52691.620920 Observed HA/dec of plate center, fiducial point (deg) : -27.002 40.656 -27.003 42.156 The rotation angle of the fid. point is 101.461837 plMakePlateFromTile : beginning loop over 1239 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0865.par makePlates : plateInfo struct for plate 1217 : (h4).mjd 52691 (h4).raCen 150.0277 (h4).decCen 41.94214 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.028 41.942 150.028 43.442 plMakePlateFromTile : mjd of obs : 52691.702953 Observed HA/dec of plate center, fiducial point (deg) : -0.002 41.925 -0.003 43.424 The rotation angle of the fid. point is -179.995365 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0866.par makePlates : plateInfo struct for plate 1218 : (h4).mjd 52691 (h4).raCen 153.2448 (h4).decCen 42.79349 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 153.245 42.793 153.245 44.293 plMakePlateFromTile : mjd of obs : 52691.703550 Observed HA/dec of plate center, fiducial point (deg) : -3.002 42.775 -3.003 44.275 The rotation angle of the fid. point is 165.717409 plMakePlateFromTile : beginning loop over 1235 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk57/complete//plPlugMapT-0867.par makePlates : plateInfo struct for plate 1219 : (h4).mjd 52691 (h4).raCen 155.7273 (h4).decCen 43.57858 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.727 43.579 155.727 45.079 plMakePlateFromTile : mjd of obs : 52691.785249 Observed HA/dec of plate center, fiducial point (deg) : 23.998 43.560 23.997 45.060 The rotation angle of the fid. point is -111.806293 plMakePlateFromTile : beginning loop over 1141 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-35.31, 71.13, 8.2) and (-35.62, 70.65, 8.5) checkLTHo : distance = 0.572, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-35.62, 70.65, 8.5) makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Jan 6 16:58:07 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 17 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1203.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 11 2 1 2 3 13 44 4 17 76 5 42 104 6 31 94 7 19 73 8 24 61 9 21 76 10 26 73 11 12 22 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 39 64 plFiberPlate : adding spectro-photo std with objId = 3513 20 3 24 121 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 38 182 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 27 367 plFiberPlate : adding spectro-photo std with objId = 3513 20 3 25 77 plFiberPlate : adding spectro-photo std with objId = 3513 20 4 32 78 plFiberPlate : adding spectro-photo std with objId = 3513 20 3 36 247 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 30 362 plFiberPlate : 79 possible sky positions to use as objects from a possible 338. plFiberPlate : 73 possible sky positions to use as objects from a possible 337. plFiberPlate : 68 possible sky positions to use as objects from a possible 336. plFiberPlate : 61 possible sky positions to use as objects from a possible 335. plFiberPlate : 50 possible sky positions to use as objects from a possible 334. plFiberPlate : 34 possible sky positions to use as objects from a possible 333. plFiberPlate : 18 possible sky positions to use as objects from a possible 332. plFiberPlate : 45 possible sky positions to use as objects from a possible 331. plFiberPlate : 40 possible sky positions to use as objects from a possible 330. plFiberPlate : 31 possible sky positions to use as objects from a possible 329. plFiberPlate : 22 possible sky positions to use as objects from a possible 328. plFiberPlate : 15 possible sky positions to use as objects from a possible 327. plFiberPlate : 10 possible sky positions to use as objects from a possible 326. plFiberPlate : 9 possible sky positions to use as objects from a possible 325. plFiberPlate : 2 possible sky positions to use as objects from a possible 324. plFiberPlate : 4 possible sky positions to use as objects from a possible 323. plFiberPlate : 42 possible sky positions to use as objects from a possible 322. plFiberPlate : 8 possible sky positions to use as objects from a possible 321. plFiberPlate : 10 possible sky positions to use as objects from a possible 320. plFiberPlate : 7 possible sky positions to use as objects from a possible 319. plFiberPlate : 3 possible sky positions to use as objects from a possible 318. plFiberPlate : 3 possible sky positions to use as objects from a possible 317. plFiberPlate : 6 possible sky positions to use as objects from a possible 316. plFiberPlate : 12 possible sky positions to use as objects from a possible 315. plFiberPlate : 10 possible sky positions to use as objects from a possible 314. plFiberPlate : 62 possible sky positions to use as objects from a possible 313. plFiberPlate : 11 possible sky positions to use as objects from a possible 312. plFiberPlate : 4 possible sky positions to use as objects from a possible 311. plFiberPlate : 3 possible sky positions to use as objects from a possible 310. plFiberPlate : 1 possible sky positions to use as objects from a possible 309. plFiberPlate : 13 possible sky positions to use as objects from a possible 308. plFiberPlate : 4 possible sky positions to use as objects from a possible 307. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1203.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1203.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1204.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 39 2 9 24 3 12 61 4 20 95 5 31 137 6 26 111 7 18 82 8 13 77 9 22 95 10 26 102 11 20 49 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 51 93 plFiberPlate : adding spectro-photo std with objId = 3513 20 3 45 136 plFiberPlate : adding spectro-photo std with objId = 3513 20 2 45 55 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 59 128 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 62 149 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 17 125 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 52 122 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 15 73 plFiberPlate : 91 possible sky positions to use as objects from a possible 449. plFiberPlate : 93 possible sky positions to use as objects from a possible 448. plFiberPlate : 76 possible sky positions to use as objects from a possible 447. plFiberPlate : 58 possible sky positions to use as objects from a possible 446. plFiberPlate : 46 possible sky positions to use as objects from a possible 445. plFiberPlate : 34 possible sky positions to use as objects from a possible 444. plFiberPlate : 35 possible sky positions to use as objects from a possible 443. plFiberPlate : 65 possible sky positions to use as objects from a possible 442. plFiberPlate : 50 possible sky positions to use as objects from a possible 441. plFiberPlate : 42 possible sky positions to use as objects from a possible 440. plFiberPlate : 34 possible sky positions to use as objects from a possible 439. plFiberPlate : 26 possible sky positions to use as objects from a possible 438. plFiberPlate : 12 possible sky positions to use as objects from a possible 437. plFiberPlate : 4 possible sky positions to use as objects from a possible 436. plFiberPlate : 15 possible sky positions to use as objects from a possible 435. plFiberPlate : 10 possible sky positions to use as objects from a possible 434. plFiberPlate : 82 possible sky positions to use as objects from a possible 433. plFiberPlate : 23 possible sky positions to use as objects from a possible 432. plFiberPlate : 13 possible sky positions to use as objects from a possible 431. plFiberPlate : 13 possible sky positions to use as objects from a possible 430. plFiberPlate : 12 possible sky positions to use as objects from a possible 429. plFiberPlate : 11 possible sky positions to use as objects from a possible 428. plFiberPlate : 5 possible sky positions to use as objects from a possible 427. plFiberPlate : 5 possible sky positions to use as objects from a possible 426. plFiberPlate : 12 possible sky positions to use as objects from a possible 425. plFiberPlate : 82 possible sky positions to use as objects from a possible 424. plFiberPlate : 20 possible sky positions to use as objects from a possible 423. plFiberPlate : 16 possible sky positions to use as objects from a possible 422. plFiberPlate : 10 possible sky positions to use as objects from a possible 421. plFiberPlate : 9 possible sky positions to use as objects from a possible 420. plFiberPlate : 12 possible sky positions to use as objects from a possible 419. plFiberPlate : 7 possible sky positions to use as objects from a possible 418. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1203.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1204.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1204.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1205.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 17 2 3 12 3 17 50 4 22 94 5 28 137 6 27 117 7 20 92 8 22 75 9 20 105 10 29 84 11 19 35 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 71 217 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 31 135 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 30 30 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 28 77 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 78 229 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 33 171 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 20 45 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 21 165 plFiberPlate : 86 possible sky positions to use as objects from a possible 431. plFiberPlate : 75 possible sky positions to use as objects from a possible 430. plFiberPlate : 68 possible sky positions to use as objects from a possible 429. plFiberPlate : 55 possible sky positions to use as objects from a possible 428. plFiberPlate : 32 possible sky positions to use as objects from a possible 427. plFiberPlate : 21 possible sky positions to use as objects from a possible 426. plFiberPlate : 13 possible sky positions to use as objects from a possible 425. plFiberPlate : 45 possible sky positions to use as objects from a possible 424. plFiberPlate : 34 possible sky positions to use as objects from a possible 423. plFiberPlate : 28 possible sky positions to use as objects from a possible 422. plFiberPlate : 17 possible sky positions to use as objects from a possible 421. plFiberPlate : 10 possible sky positions to use as objects from a possible 420. plFiberPlate : 4 possible sky positions to use as objects from a possible 419. plFiberPlate : 6 possible sky positions to use as objects from a possible 418. plFiberPlate : 7 possible sky positions to use as objects from a possible 417. plFiberPlate : 9 possible sky positions to use as objects from a possible 416. plFiberPlate : 40 possible sky positions to use as objects from a possible 415. plFiberPlate : 24 possible sky positions to use as objects from a possible 414. plFiberPlate : 11 possible sky positions to use as objects from a possible 413. plFiberPlate : 11 possible sky positions to use as objects from a possible 412. plFiberPlate : 8 possible sky positions to use as objects from a possible 411. plFiberPlate : 7 possible sky positions to use as objects from a possible 410. plFiberPlate : 5 possible sky positions to use as objects from a possible 409. plFiberPlate : 8 possible sky positions to use as objects from a possible 408. plFiberPlate : 5 possible sky positions to use as objects from a possible 407. plFiberPlate : 61 possible sky positions to use as objects from a possible 406. plFiberPlate : 21 possible sky positions to use as objects from a possible 405. plFiberPlate : 8 possible sky positions to use as objects from a possible 404. plFiberPlate : 10 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 8 possible sky positions to use as objects from a possible 401. plFiberPlate : 20 possible sky positions to use as objects from a possible 400. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1204.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1205.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1205.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1206.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 38 2 5 21 3 16 67 4 19 105 5 36 134 6 33 99 7 13 88 8 23 90 9 25 118 10 26 99 11 15 57 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 99 84 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 54 168 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 54 171 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 91 158 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 39 32 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 43 151 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 91 167 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 43 17 plFiberPlate : 95 possible sky positions to use as objects from a possible 483. plFiberPlate : 83 possible sky positions to use as objects from a possible 482. plFiberPlate : 82 possible sky positions to use as objects from a possible 481. plFiberPlate : 57 possible sky positions to use as objects from a possible 480. plFiberPlate : 30 possible sky positions to use as objects from a possible 479. plFiberPlate : 23 possible sky positions to use as objects from a possible 478. plFiberPlate : 22 possible sky positions to use as objects from a possible 477. plFiberPlate : 62 possible sky positions to use as objects from a possible 476. plFiberPlate : 38 possible sky positions to use as objects from a possible 475. plFiberPlate : 29 possible sky positions to use as objects from a possible 474. plFiberPlate : 22 possible sky positions to use as objects from a possible 473. plFiberPlate : 6 possible sky positions to use as objects from a possible 472. plFiberPlate : 10 possible sky positions to use as objects from a possible 471. plFiberPlate : 5 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 12 possible sky positions to use as objects from a possible 468. plFiberPlate : 60 possible sky positions to use as objects from a possible 467. plFiberPlate : 31 possible sky positions to use as objects from a possible 466. plFiberPlate : 11 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : 11 possible sky positions to use as objects from a possible 463. plFiberPlate : 3 possible sky positions to use as objects from a possible 462. plFiberPlate : 4 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : 10 possible sky positions to use as objects from a possible 459. plFiberPlate : 59 possible sky positions to use as objects from a possible 458. plFiberPlate : 15 possible sky positions to use as objects from a possible 457. plFiberPlate : 17 possible sky positions to use as objects from a possible 456. plFiberPlate : 17 possible sky positions to use as objects from a possible 455. plFiberPlate : 6 possible sky positions to use as objects from a possible 454. plFiberPlate : 10 possible sky positions to use as objects from a possible 453. plFiberPlate : 9 possible sky positions to use as objects from a possible 452. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1205.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1206.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1206.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1207.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 50 2 9 35 3 20 72 4 21 104 5 29 121 6 29 103 7 10 79 8 19 87 9 15 104 10 34 112 11 16 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 60 49 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 111 101 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 55 154 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 113 163 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 65 110 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 70 25 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 69 32 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 73 9 plFiberPlate : 114 possible sky positions to use as objects from a possible 482. plFiberPlate : 90 possible sky positions to use as objects from a possible 481. plFiberPlate : 71 possible sky positions to use as objects from a possible 480. plFiberPlate : 54 possible sky positions to use as objects from a possible 479. plFiberPlate : 28 possible sky positions to use as objects from a possible 478. plFiberPlate : 14 possible sky positions to use as objects from a possible 477. plFiberPlate : 19 possible sky positions to use as objects from a possible 476. plFiberPlate : 64 possible sky positions to use as objects from a possible 475. plFiberPlate : 44 possible sky positions to use as objects from a possible 474. plFiberPlate : 29 possible sky positions to use as objects from a possible 473. plFiberPlate : 14 possible sky positions to use as objects from a possible 472. plFiberPlate : 9 possible sky positions to use as objects from a possible 471. plFiberPlate : 3 possible sky positions to use as objects from a possible 470. plFiberPlate : 10 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 10 possible sky positions to use as objects from a possible 467. plFiberPlate : 57 possible sky positions to use as objects from a possible 466. plFiberPlate : 23 possible sky positions to use as objects from a possible 465. plFiberPlate : 15 possible sky positions to use as objects from a possible 464. plFiberPlate : 10 possible sky positions to use as objects from a possible 463. plFiberPlate : 12 possible sky positions to use as objects from a possible 462. plFiberPlate : 8 possible sky positions to use as objects from a possible 461. plFiberPlate : 8 possible sky positions to use as objects from a possible 460. plFiberPlate : 5 possible sky positions to use as objects from a possible 459. plFiberPlate : 22 possible sky positions to use as objects from a possible 458. plFiberPlate : 68 possible sky positions to use as objects from a possible 457. plFiberPlate : 22 possible sky positions to use as objects from a possible 456. plFiberPlate : 6 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 5 possible sky positions to use as objects from a possible 453. plFiberPlate : 4 possible sky positions to use as objects from a possible 452. plFiberPlate : 5 possible sky positions to use as objects from a possible 451. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1206.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1207.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1207.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1208.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 52 2 6 36 3 19 78 4 21 99 5 21 129 6 22 114 7 17 95 8 14 105 9 17 99 10 29 107 11 15 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 123 57 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 77 51 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 89 66 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 77 30 plFiberPlate : adding spectro-photo std with objId = 3462 20 6 130 48 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 127 14 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 76 113 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 73 9 plFiberPlate : 85 possible sky positions to use as objects from a possible 512. plFiberPlate : 61 possible sky positions to use as objects from a possible 511. plFiberPlate : 61 possible sky positions to use as objects from a possible 510. plFiberPlate : 39 possible sky positions to use as objects from a possible 509. plFiberPlate : 24 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 24 possible sky positions to use as objects from a possible 506. plFiberPlate : 44 possible sky positions to use as objects from a possible 505. plFiberPlate : 25 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 19 possible sky positions to use as objects from a possible 502. plFiberPlate : 14 possible sky positions to use as objects from a possible 501. plFiberPlate : 5 possible sky positions to use as objects from a possible 500. plFiberPlate : 7 possible sky positions to use as objects from a possible 499. plFiberPlate : 21 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 37 possible sky positions to use as objects from a possible 496. plFiberPlate : 21 possible sky positions to use as objects from a possible 495. plFiberPlate : 16 possible sky positions to use as objects from a possible 494. plFiberPlate : 8 possible sky positions to use as objects from a possible 493. plFiberPlate : 2 possible sky positions to use as objects from a possible 492. plFiberPlate : 8 possible sky positions to use as objects from a possible 491. plFiberPlate : 7 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 17 possible sky positions to use as objects from a possible 488. plFiberPlate : 66 possible sky positions to use as objects from a possible 487. plFiberPlate : 21 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 40 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1207.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1208.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1208.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1209.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 48 2 3 20 3 10 66 4 13 97 5 17 125 6 13 101 7 12 83 8 23 97 9 9 102 10 23 98 11 16 53 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 144 64 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 133 54 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 99 145 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 89 66 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 135 133 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 138 53 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 103 75 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 138 78 plFiberPlate : 101 possible sky positions to use as objects from a possible 463. plFiberPlate : 80 possible sky positions to use as objects from a possible 462. plFiberPlate : 61 possible sky positions to use as objects from a possible 461. plFiberPlate : 33 possible sky positions to use as objects from a possible 460. plFiberPlate : 20 possible sky positions to use as objects from a possible 459. plFiberPlate : 13 possible sky positions to use as objects from a possible 458. plFiberPlate : 27 possible sky positions to use as objects from a possible 457. plFiberPlate : 50 possible sky positions to use as objects from a possible 456. plFiberPlate : 22 possible sky positions to use as objects from a possible 455. plFiberPlate : 17 possible sky positions to use as objects from a possible 454. plFiberPlate : 12 possible sky positions to use as objects from a possible 453. plFiberPlate : 6 possible sky positions to use as objects from a possible 452. plFiberPlate : 7 possible sky positions to use as objects from a possible 451. plFiberPlate : 13 possible sky positions to use as objects from a possible 450. plFiberPlate : 10 possible sky positions to use as objects from a possible 449. plFiberPlate : 7 possible sky positions to use as objects from a possible 448. plFiberPlate : 44 possible sky positions to use as objects from a possible 447. plFiberPlate : 25 possible sky positions to use as objects from a possible 446. plFiberPlate : 15 possible sky positions to use as objects from a possible 445. plFiberPlate : 6 possible sky positions to use as objects from a possible 444. plFiberPlate : 3 possible sky positions to use as objects from a possible 443. plFiberPlate : 8 possible sky positions to use as objects from a possible 442. plFiberPlate : 12 possible sky positions to use as objects from a possible 441. plFiberPlate : 18 possible sky positions to use as objects from a possible 440. plFiberPlate : 8 possible sky positions to use as objects from a possible 439. plFiberPlate : 86 possible sky positions to use as objects from a possible 438. plFiberPlate : 14 possible sky positions to use as objects from a possible 437. plFiberPlate : 15 possible sky positions to use as objects from a possible 436. plFiberPlate : 12 possible sky positions to use as objects from a possible 435. plFiberPlate : 12 possible sky positions to use as objects from a possible 434. plFiberPlate : 25 possible sky positions to use as objects from a possible 433. plFiberPlate : 15 possible sky positions to use as objects from a possible 432. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1208.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1209.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1209.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1210.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 52 2 6 27 3 25 74 4 33 104 5 20 122 6 22 85 7 17 84 8 20 99 9 17 102 10 34 112 11 16 61 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 110 27 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 110 78 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 102 60 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 108 48 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 164 105 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 156 10 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 162 33 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 103 75 plFiberPlate : 90 possible sky positions to use as objects from a possible 486. plFiberPlate : 90 possible sky positions to use as objects from a possible 485. plFiberPlate : 33 possible sky positions to use as objects from a possible 484. plFiberPlate : 16 possible sky positions to use as objects from a possible 483. plFiberPlate : 8 possible sky positions to use as objects from a possible 482. plFiberPlate : 20 possible sky positions to use as objects from a possible 481. plFiberPlate : 20 possible sky positions to use as objects from a possible 480. plFiberPlate : 53 possible sky positions to use as objects from a possible 479. plFiberPlate : 36 possible sky positions to use as objects from a possible 478. plFiberPlate : 23 possible sky positions to use as objects from a possible 477. plFiberPlate : 10 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 4 possible sky positions to use as objects from a possible 473. plFiberPlate : 7 possible sky positions to use as objects from a possible 472. plFiberPlate : 18 possible sky positions to use as objects from a possible 471. plFiberPlate : 60 possible sky positions to use as objects from a possible 470. plFiberPlate : 23 possible sky positions to use as objects from a possible 469. plFiberPlate : 25 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 18 possible sky positions to use as objects from a possible 465. plFiberPlate : 6 possible sky positions to use as objects from a possible 464. plFiberPlate : 10 possible sky positions to use as objects from a possible 463. plFiberPlate : 16 possible sky positions to use as objects from a possible 462. plFiberPlate : 45 possible sky positions to use as objects from a possible 461. plFiberPlate : 19 possible sky positions to use as objects from a possible 460. plFiberPlate : 14 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 21 possible sky positions to use as objects from a possible 457. plFiberPlate : 13 possible sky positions to use as objects from a possible 456. plFiberPlate : 13 possible sky positions to use as objects from a possible 455. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1209.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1210.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1210.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1211.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 55 2 9 36 3 15 73 4 17 105 5 14 121 6 11 104 7 13 94 8 21 110 9 11 101 10 28 116 11 18 61 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 178 47 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 129 71 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 176 99 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 164 105 plFiberPlate : adding spectro-photo std with objId = 3462 20 6 180 10 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 182 26 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 124 32 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 131 66 plFiberPlate : 100 possible sky positions to use as objects from a possible 510. plFiberPlate : 87 possible sky positions to use as objects from a possible 509. plFiberPlate : 59 possible sky positions to use as objects from a possible 508. plFiberPlate : 41 possible sky positions to use as objects from a possible 507. plFiberPlate : 17 possible sky positions to use as objects from a possible 506. plFiberPlate : 30 possible sky positions to use as objects from a possible 505. plFiberPlate : 23 possible sky positions to use as objects from a possible 504. plFiberPlate : 47 possible sky positions to use as objects from a possible 503. plFiberPlate : 31 possible sky positions to use as objects from a possible 502. plFiberPlate : 18 possible sky positions to use as objects from a possible 501. plFiberPlate : 11 possible sky positions to use as objects from a possible 500. plFiberPlate : 2 possible sky positions to use as objects from a possible 499. plFiberPlate : 13 possible sky positions to use as objects from a possible 498. plFiberPlate : 5 possible sky positions to use as objects from a possible 497. plFiberPlate : 6 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 49 possible sky positions to use as objects from a possible 494. plFiberPlate : 26 possible sky positions to use as objects from a possible 493. plFiberPlate : 22 possible sky positions to use as objects from a possible 492. plFiberPlate : 9 possible sky positions to use as objects from a possible 491. plFiberPlate : 4 possible sky positions to use as objects from a possible 490. plFiberPlate : 8 possible sky positions to use as objects from a possible 489. plFiberPlate : 5 possible sky positions to use as objects from a possible 488. plFiberPlate : 19 possible sky positions to use as objects from a possible 487. plFiberPlate : 15 possible sky positions to use as objects from a possible 486. plFiberPlate : 53 possible sky positions to use as objects from a possible 485. plFiberPlate : 39 possible sky positions to use as objects from a possible 484. plFiberPlate : 27 possible sky positions to use as objects from a possible 483. plFiberPlate : 6 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 31 possible sky positions to use as objects from a possible 480. plFiberPlate : 28 possible sky positions to use as objects from a possible 479. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1210.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1211.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1211.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1212.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 59 2 7 38 3 23 73 4 31 107 5 22 128 6 17 110 7 14 105 8 22 100 9 15 109 10 34 125 11 12 67 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 147 21 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 194 35 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 194 62 plFiberPlate : adding spectro-photo std with objId = 3462 20 6 180 10 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 182 26 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 131 66 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 192 20 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 148 71 plFiberPlate : 126 possible sky positions to use as objects from a possible 536. plFiberPlate : 85 possible sky positions to use as objects from a possible 535. plFiberPlate : 61 possible sky positions to use as objects from a possible 534. plFiberPlate : 37 possible sky positions to use as objects from a possible 533. plFiberPlate : 22 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 23 possible sky positions to use as objects from a possible 530. plFiberPlate : 71 possible sky positions to use as objects from a possible 529. plFiberPlate : 38 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 17 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 6 possible sky positions to use as objects from a possible 524. plFiberPlate : 11 possible sky positions to use as objects from a possible 523. plFiberPlate : 5 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 60 possible sky positions to use as objects from a possible 520. plFiberPlate : 44 possible sky positions to use as objects from a possible 519. plFiberPlate : 39 possible sky positions to use as objects from a possible 518. plFiberPlate : 25 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 6 possible sky positions to use as objects from a possible 514. plFiberPlate : 11 possible sky positions to use as objects from a possible 513. plFiberPlate : 11 possible sky positions to use as objects from a possible 512. plFiberPlate : 73 possible sky positions to use as objects from a possible 511. plFiberPlate : 27 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : 12 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 12 possible sky positions to use as objects from a possible 506. plFiberPlate : 33 possible sky positions to use as objects from a possible 505. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1211.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1212.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1212.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1213.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 65 2 8 32 3 23 69 4 27 100 5 13 119 6 16 92 7 10 89 8 14 113 9 9 93 10 29 115 11 15 66 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 153 84 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 198 50 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 209 28 plFiberPlate : adding spectro-photo std with objId = 3462 20 6 198 86 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 155 96 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 208 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 205 41 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 148 71 plFiberPlate : 117 possible sky positions to use as objects from a possible 503. plFiberPlate : 69 possible sky positions to use as objects from a possible 502. plFiberPlate : 56 possible sky positions to use as objects from a possible 501. plFiberPlate : 27 possible sky positions to use as objects from a possible 500. plFiberPlate : 5 possible sky positions to use as objects from a possible 499. plFiberPlate : 19 possible sky positions to use as objects from a possible 498. plFiberPlate : 30 possible sky positions to use as objects from a possible 497. plFiberPlate : 61 possible sky positions to use as objects from a possible 496. plFiberPlate : 43 possible sky positions to use as objects from a possible 495. plFiberPlate : 22 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 10 possible sky positions to use as objects from a possible 492. plFiberPlate : 9 possible sky positions to use as objects from a possible 491. plFiberPlate : 6 possible sky positions to use as objects from a possible 490. plFiberPlate : 10 possible sky positions to use as objects from a possible 489. plFiberPlate : 17 possible sky positions to use as objects from a possible 488. plFiberPlate : 47 possible sky positions to use as objects from a possible 487. plFiberPlate : 42 possible sky positions to use as objects from a possible 486. plFiberPlate : 31 possible sky positions to use as objects from a possible 485. plFiberPlate : 23 possible sky positions to use as objects from a possible 484. plFiberPlate : 13 possible sky positions to use as objects from a possible 483. plFiberPlate : 10 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 14 possible sky positions to use as objects from a possible 480. plFiberPlate : 22 possible sky positions to use as objects from a possible 479. plFiberPlate : 68 possible sky positions to use as objects from a possible 478. plFiberPlate : 25 possible sky positions to use as objects from a possible 477. plFiberPlate : 10 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 8 possible sky positions to use as objects from a possible 474. plFiberPlate : 12 possible sky positions to use as objects from a possible 473. plFiberPlate : 40 possible sky positions to use as objects from a possible 472. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1212.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1213.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1213.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1214.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 74 2 8 47 3 6 85 4 9 109 5 21 121 6 16 107 7 11 97 8 18 108 9 14 107 10 19 128 11 16 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 224 9 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 176 48 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 221 8 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 212 64 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 170 29 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 175 33 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 218 19 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 168 93 plFiberPlate : 124 possible sky positions to use as objects from a possible 553. plFiberPlate : 74 possible sky positions to use as objects from a possible 552. plFiberPlate : 41 possible sky positions to use as objects from a possible 551. plFiberPlate : 23 possible sky positions to use as objects from a possible 550. plFiberPlate : 9 possible sky positions to use as objects from a possible 549. plFiberPlate : 17 possible sky positions to use as objects from a possible 548. plFiberPlate : 30 possible sky positions to use as objects from a possible 547. plFiberPlate : 56 possible sky positions to use as objects from a possible 546. plFiberPlate : 26 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : 12 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 9 possible sky positions to use as objects from a possible 541. plFiberPlate : 8 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : 14 possible sky positions to use as objects from a possible 538. plFiberPlate : 50 possible sky positions to use as objects from a possible 537. plFiberPlate : 44 possible sky positions to use as objects from a possible 536. plFiberPlate : 41 possible sky positions to use as objects from a possible 535. plFiberPlate : 33 possible sky positions to use as objects from a possible 534. plFiberPlate : 16 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 26 possible sky positions to use as objects from a possible 530. plFiberPlate : 20 possible sky positions to use as objects from a possible 529. plFiberPlate : 61 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 17 possible sky positions to use as objects from a possible 526. plFiberPlate : 7 possible sky positions to use as objects from a possible 525. plFiberPlate : 10 possible sky positions to use as objects from a possible 524. plFiberPlate : 13 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1213.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1214.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1214.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1215.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 79 2 10 46 3 14 79 4 16 111 5 16 119 6 19 97 7 5 95 8 8 103 9 8 112 10 20 137 11 12 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 181 87 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 189 76 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 224 54 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 187 65 plFiberPlate : adding spectro-photo std with objId = 3462 20 6 237 41 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 186 23 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 181 56 plFiberPlate : adding spectro-photo std with objId = 3530 20 6 181 48 plFiberPlate : 124 possible sky positions to use as objects from a possible 540. plFiberPlate : 59 possible sky positions to use as objects from a possible 539. plFiberPlate : 39 possible sky positions to use as objects from a possible 538. plFiberPlate : 21 possible sky positions to use as objects from a possible 537. plFiberPlate : 21 possible sky positions to use as objects from a possible 536. plFiberPlate : 28 possible sky positions to use as objects from a possible 535. plFiberPlate : 20 possible sky positions to use as objects from a possible 534. plFiberPlate : 73 possible sky positions to use as objects from a possible 533. plFiberPlate : 48 possible sky positions to use as objects from a possible 532. plFiberPlate : 26 possible sky positions to use as objects from a possible 531. plFiberPlate : 19 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 13 possible sky positions to use as objects from a possible 528. plFiberPlate : 12 possible sky positions to use as objects from a possible 527. plFiberPlate : 2 possible sky positions to use as objects from a possible 526. plFiberPlate : 15 possible sky positions to use as objects from a possible 525. plFiberPlate : 82 possible sky positions to use as objects from a possible 524. plFiberPlate : 46 possible sky positions to use as objects from a possible 523. plFiberPlate : 30 possible sky positions to use as objects from a possible 522. plFiberPlate : 14 possible sky positions to use as objects from a possible 521. plFiberPlate : 14 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 13 possible sky positions to use as objects from a possible 518. plFiberPlate : 17 possible sky positions to use as objects from a possible 517. plFiberPlate : 13 possible sky positions to use as objects from a possible 516. plFiberPlate : 47 possible sky positions to use as objects from a possible 515. plFiberPlate : 20 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 6 possible sky positions to use as objects from a possible 512. plFiberPlate : 21 possible sky positions to use as objects from a possible 511. plFiberPlate : 9 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1214.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1215.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1215.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1216.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 72 2 3 31 3 12 76 4 16 116 5 11 129 6 10 102 7 6 93 8 16 100 9 4 121 10 19 127 11 9 73 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 207 64 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 211 65 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 200 123 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 257 60 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 246 12 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 204 76 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 205 113 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 206 44 plFiberPlate : 132 possible sky positions to use as objects from a possible 532. plFiberPlate : 90 possible sky positions to use as objects from a possible 531. plFiberPlate : 68 possible sky positions to use as objects from a possible 530. plFiberPlate : 33 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 25 possible sky positions to use as objects from a possible 527. plFiberPlate : 34 possible sky positions to use as objects from a possible 526. plFiberPlate : 62 possible sky positions to use as objects from a possible 525. plFiberPlate : 48 possible sky positions to use as objects from a possible 524. plFiberPlate : 32 possible sky positions to use as objects from a possible 523. plFiberPlate : 14 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 11 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 75 possible sky positions to use as objects from a possible 516. plFiberPlate : 52 possible sky positions to use as objects from a possible 515. plFiberPlate : 34 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 20 possible sky positions to use as objects from a possible 512. plFiberPlate : 20 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 7 possible sky positions to use as objects from a possible 508. plFiberPlate : 57 possible sky positions to use as objects from a possible 507. plFiberPlate : 29 possible sky positions to use as objects from a possible 506. plFiberPlate : 18 possible sky positions to use as objects from a possible 505. plFiberPlate : 9 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 17 possible sky positions to use as objects from a possible 502. plFiberPlate : 23 possible sky positions to use as objects from a possible 501. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1215.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1216.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1216.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1217.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 96 2 7 59 3 12 84 4 11 106 5 11 125 6 19 98 7 9 84 8 8 95 9 11 111 10 23 140 11 10 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 262 17 plFiberPlate : adding spectro-photo std with objId = 3530 20 2 216 59 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 257 60 plFiberPlate : adding spectro-photo std with objId = 3530 20 6 221 22 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 257 10 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 260 57 plFiberPlate : adding spectro-photo std with objId = 3462 20 6 273 16 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 222 35 plFiberPlate : 129 possible sky positions to use as objects from a possible 559. plFiberPlate : 79 possible sky positions to use as objects from a possible 558. plFiberPlate : 56 possible sky positions to use as objects from a possible 557. plFiberPlate : 25 possible sky positions to use as objects from a possible 556. plFiberPlate : 22 possible sky positions to use as objects from a possible 555. plFiberPlate : 37 possible sky positions to use as objects from a possible 554. plFiberPlate : 42 possible sky positions to use as objects from a possible 553. plFiberPlate : 81 possible sky positions to use as objects from a possible 552. plFiberPlate : 58 possible sky positions to use as objects from a possible 551. plFiberPlate : 32 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 17 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 21 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 13 possible sky positions to use as objects from a possible 544. plFiberPlate : 85 possible sky positions to use as objects from a possible 543. plFiberPlate : 53 possible sky positions to use as objects from a possible 542. plFiberPlate : 40 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 13 possible sky positions to use as objects from a possible 539. plFiberPlate : 15 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 24 possible sky positions to use as objects from a possible 535. plFiberPlate : 51 possible sky positions to use as objects from a possible 534. plFiberPlate : 29 possible sky positions to use as objects from a possible 533. plFiberPlate : 27 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 6 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1216.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1217.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1217.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1218.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 84 2 9 59 3 9 75 4 12 100 5 11 115 6 14 92 7 11 98 8 6 94 9 7 101 10 18 148 11 13 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 232 65 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 273 84 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 240 32 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 280 22 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 287 36 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 276 21 plFiberPlate : adding spectro-photo std with objId = 3462 20 3 278 88 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 245 41 plFiberPlate : 117 possible sky positions to use as objects from a possible 532. plFiberPlate : 66 possible sky positions to use as objects from a possible 531. plFiberPlate : 48 possible sky positions to use as objects from a possible 530. plFiberPlate : 28 possible sky positions to use as objects from a possible 529. plFiberPlate : 38 possible sky positions to use as objects from a possible 528. plFiberPlate : 39 possible sky positions to use as objects from a possible 527. plFiberPlate : 28 possible sky positions to use as objects from a possible 526. plFiberPlate : 51 possible sky positions to use as objects from a possible 525. plFiberPlate : 37 possible sky positions to use as objects from a possible 524. plFiberPlate : 23 possible sky positions to use as objects from a possible 523. plFiberPlate : 16 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 12 possible sky positions to use as objects from a possible 520. plFiberPlate : 7 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 65 possible sky positions to use as objects from a possible 516. plFiberPlate : 40 possible sky positions to use as objects from a possible 515. plFiberPlate : 36 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 9 possible sky positions to use as objects from a possible 512. plFiberPlate : 7 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 10 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 29 possible sky positions to use as objects from a possible 507. plFiberPlate : 35 possible sky positions to use as objects from a possible 506. plFiberPlate : 20 possible sky positions to use as objects from a possible 505. plFiberPlate : 9 possible sky positions to use as objects from a possible 504. plFiberPlate : 15 possible sky positions to use as objects from a possible 503. plFiberPlate : 23 possible sky positions to use as objects from a possible 502. plFiberPlate : 18 possible sky positions to use as objects from a possible 501. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1217.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1218.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1218.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.1/plPlugMapP-1219.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 70 2 6 56 3 4 66 4 9 88 5 5 132 6 2 112 7 3 65 8 5 46 9 8 105 10 20 124 11 8 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3462 20 5 297 106 plFiberPlate : adding spectro-photo std with objId = 3530 20 4 240 32 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 297 81 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 244 63 plFiberPlate : adding spectro-photo std with objId = 3462 20 4 287 36 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 248 6 plFiberPlate : adding spectro-photo std with objId = 3530 20 5 246 3 plFiberPlate : adding spectro-photo std with objId = 3530 20 3 245 41 plFiberPlate : 111 possible sky positions to use as objects from a possible 466. plFiberPlate : 51 possible sky positions to use as objects from a possible 465. plFiberPlate : 36 possible sky positions to use as objects from a possible 464. plFiberPlate : 28 possible sky positions to use as objects from a possible 463. plFiberPlate : 29 possible sky positions to use as objects from a possible 462. plFiberPlate : 21 possible sky positions to use as objects from a possible 461. plFiberPlate : 20 possible sky positions to use as objects from a possible 460. plFiberPlate : 69 possible sky positions to use as objects from a possible 459. plFiberPlate : 38 possible sky positions to use as objects from a possible 458. plFiberPlate : 24 possible sky positions to use as objects from a possible 457. plFiberPlate : 14 possible sky positions to use as objects from a possible 456. plFiberPlate : 20 possible sky positions to use as objects from a possible 455. plFiberPlate : 10 possible sky positions to use as objects from a possible 454. plFiberPlate : 5 possible sky positions to use as objects from a possible 453. plFiberPlate : 7 possible sky positions to use as objects from a possible 452. plFiberPlate : 2 possible sky positions to use as objects from a possible 451. plFiberPlate : 79 possible sky positions to use as objects from a possible 450. plFiberPlate : 46 possible sky positions to use as objects from a possible 449. plFiberPlate : 29 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : 12 possible sky positions to use as objects from a possible 446. plFiberPlate : 7 possible sky positions to use as objects from a possible 445. plFiberPlate : 9 possible sky positions to use as objects from a possible 444. plFiberPlate : 12 possible sky positions to use as objects from a possible 443. plFiberPlate : 4 possible sky positions to use as objects from a possible 442. plFiberPlate : 43 possible sky positions to use as objects from a possible 441. plFiberPlate : 25 possible sky positions to use as objects from a possible 440. plFiberPlate : 19 possible sky positions to use as objects from a possible 439. plFiberPlate : 15 possible sky positions to use as objects from a possible 438. plFiberPlate : 7 possible sky positions to use as objects from a possible 437. plFiberPlate : 5 possible sky positions to use as objects from a possible 436. plFiberPlate : 9 possible sky positions to use as objects from a possible 435. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1218.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1219.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.1/plOverlay-1219.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Jan 6 16:58:57 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 17 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1203.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1203.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1203.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1204.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1204.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1204.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1205.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1205.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1205.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1206.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.8490,-6.6860) and (-11.43,-5.57) plMakeFanucCodes : fixed path between (-11.9878,-3.7524) and (-12.56,-2.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1206.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1206.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1207.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0436,6.2339) and (-11.48,5.13) plMakeFanucCodes : fixed path between (-5.1695,-11.5459) and (-4.43,-11.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1207.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1207.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1208.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1208.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1208.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1209.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1209.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1209.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1210.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3325,-3.3374) and (-12.46,-1.43) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1210.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1210.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1211.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2306,3.3324) and (-12.58,1.26) plMakeFanucCodes : fixed path between (-5.0409,-11.6761) and (-3.60,-12.27) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1211.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1211.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1212.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1212.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1212.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1213.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1213.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0366,-6.1672) and (12.61,-0.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1213.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1214.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1214.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1214.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1215.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1215.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1215.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1216.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.3864,-9.5810) and (-6.86,-10.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1216.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1216.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1217.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.6709,-6.6439) and (-11.53,-5.13) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1217.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1217.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1218.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.9214,6.6563) and (11.67,4.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1218.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1218.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1219.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5206,-5.2379) and (-12.36,-2.74) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1219.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.1/plFanuc-1219.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Jan 6 16:59:49 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e456e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 17 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1203 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1204 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1205 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1206 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1207 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1208 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1209 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1210 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1211 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1212 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1213 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1214 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1215 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1216 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1217 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1218 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1219 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Jan 6 17:00:14 CST 2003 Begin running plateEnder dr2003.01.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.01.1 -morePipes 1 failed. PS: Read file for stderr output of this job.