Sender: LSF System Subject: Job 12064: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Jan 6 17:08:32 2003 Results reported at Mon Jan 6 17:12:27 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_151 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.01.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 187.06 sec. Max Memory : 10 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Jan 6 17:08:33 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Jan 6 17:08:37 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_151/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Mon Jan 6 17:08:37 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_151/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Mon Jan 6 17:08:37 CST 2003 Begin running plate --------------------------------------------------------------- Mon Jan 6 17:08:37 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e44668 makePlates : beginning loop over plObs chain; makePlates : making 14 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0868.par makePlates : plateInfo struct for plate 1220 : (h4).mjd 52691 (h4).raCen 165.2701 (h4).decCen 9.443444 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.270 9.443 165.270 10.943 plMakePlateFromTile : mjd of obs : 52691.825511 Observed HA/dec of plate center, fiducial point (deg) : 28.998 9.435 28.998 10.934 The rotation angle of the fid. point is -44.580103 plMakePlateFromTile : beginning loop over 1125 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0869.par makePlates : plateInfo struct for plate 1221 : (h4).mjd 52691 (h4).raCen 167.3203 (h4).decCen 9.604697 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.320 9.605 167.320 11.105 plMakePlateFromTile : mjd of obs : 52691.825648 Observed HA/dec of plate center, fiducial point (deg) : 26.998 9.596 26.998 11.095 The rotation angle of the fid. point is -43.019318 plMakePlateFromTile : beginning loop over 1279 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0870.par makePlates : plateInfo struct for plate 1222 : (h4).mjd 52691 (h4).raCen 169.5852 (h4).decCen 9.621305 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.585 9.621 169.585 11.121 plMakePlateFromTile : mjd of obs : 52691.826379 Observed HA/dec of plate center, fiducial point (deg) : 24.998 9.612 24.998 11.111 The rotation angle of the fid. point is -41.145541 plMakePlateFromTile : beginning loop over 1222 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0871.par makePlates : plateInfo struct for plate 1223 : (h4).mjd 52691 (h4).raCen 171.9636 (h4).decCen 9.722045 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.964 9.722 171.964 11.222 plMakePlateFromTile : mjd of obs : 52691.827425 Observed HA/dec of plate center, fiducial point (deg) : 22.998 9.712 22.998 11.212 The rotation angle of the fid. point is -39.173983 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0872.par makePlates : plateInfo struct for plate 1224 : (h4).mjd 52691 (h4).raCen 174.1218 (h4).decCen 9.876687 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.122 9.877 174.122 11.377 plMakePlateFromTile : mjd of obs : 52691.825090 Observed HA/dec of plate center, fiducial point (deg) : 19.998 9.866 19.998 11.366 The rotation angle of the fid. point is -35.841012 plMakePlateFromTile : beginning loop over 1285 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0873.par makePlates : plateInfo struct for plate 1225 : (h4).mjd 52691 (h4).raCen 175.7655 (h4).decCen 9.868668 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.766 9.869 175.766 11.369 plMakePlateFromTile : mjd of obs : 52691.826872 Observed HA/dec of plate center, fiducial point (deg) : 18.998 9.858 18.998 11.358 The rotation angle of the fid. point is -34.559333 plMakePlateFromTile : beginning loop over 1259 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0874.par makePlates : plateInfo struct for plate 1226 : (h4).mjd 52691 (h4).raCen 177.0266 (h4).decCen 9.916705 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.027 9.917 177.027 11.417 plMakePlateFromTile : mjd of obs : 52691.824823 Observed HA/dec of plate center, fiducial point (deg) : 16.998 9.906 16.998 11.405 The rotation angle of the fid. point is -31.887957 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (207.60, -236.68, 7.4) and (206.74, -238.29, 7.9) checkLTHo : distance = 1.822, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(206.74, -238.29, 7.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0875.par makePlates : plateInfo struct for plate 1227 : (h4).mjd 52691 (h4).raCen 178.6825 (h4).decCen 9.954723 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.683 9.955 178.683 11.455 plMakePlateFromTile : mjd of obs : 52691.826639 Observed HA/dec of plate center, fiducial point (deg) : 15.998 9.944 15.998 11.443 The rotation angle of the fid. point is -30.476392 plMakePlateFromTile : beginning loop over 1288 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-149.13, -244.93, 7.4) and (-150.00, -246.53, 7.9) checkLTHo : distance = 1.828, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-150.00, -246.53, 7.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0876.par makePlates : plateInfo struct for plate 1228 : (h4).mjd 52691 (h4).raCen 180.5347 (h4).decCen 9.946654 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.535 9.947 180.535 11.447 plMakePlateFromTile : mjd of obs : 52691.826228 Observed HA/dec of plate center, fiducial point (deg) : 13.998 9.936 13.998 11.435 The rotation angle of the fid. point is -27.386785 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0877.par makePlates : plateInfo struct for plate 1229 : (h4).mjd 52691 (h4).raCen 182.4251 (h4).decCen 10.01812 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.425 10.018 182.425 11.518 plMakePlateFromTile : mjd of obs : 52691.825922 Observed HA/dec of plate center, fiducial point (deg) : 11.998 10.007 11.998 11.506 The rotation angle of the fid. point is -24.122988 plMakePlateFromTile : beginning loop over 1276 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0878.par makePlates : plateInfo struct for plate 1230 : (h4).mjd 52691 (h4).raCen 184.4683 (h4).decCen 9.96039 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.468 9.960 184.468 11.460 plMakePlateFromTile : mjd of obs : 52691.867605 Observed HA/dec of plate center, fiducial point (deg) : 24.998 9.950 24.998 11.449 The rotation angle of the fid. point is -41.499522 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0879.par makePlates : plateInfo struct for plate 1231 : (h4).mjd 52691 (h4).raCen 186.3274 (h4).decCen 9.990857 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.327 9.991 186.327 11.491 plMakePlateFromTile : mjd of obs : 52691.867212 Observed HA/dec of plate center, fiducial point (deg) : 22.998 9.980 22.998 11.480 The rotation angle of the fid. point is -39.458268 plMakePlateFromTile : beginning loop over 1250 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0880.par makePlates : plateInfo struct for plate 1232 : (h4).mjd 52691 (h4).raCen 187.8026 (h4).decCen 10.00829 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.803 10.008 187.803 11.508 plMakePlateFromTile : mjd of obs : 52691.868527 Observed HA/dec of plate center, fiducial point (deg) : 21.998 9.998 21.998 11.497 The rotation angle of the fid. point is -38.365109 plMakePlateFromTile : beginning loop over 1253 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk58/complete//plPlugMapT-0881.par makePlates : plateInfo struct for plate 1233 : (h4).mjd 52691 (h4).raCen 189.4103 (h4).decCen 9.987317 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.410 9.987 189.410 11.487 plMakePlateFromTile : mjd of obs : 52691.867438 Observed HA/dec of plate center, fiducial point (deg) : 19.998 9.977 19.998 11.476 The rotation angle of the fid. point is -35.960259 plMakePlateFromTile : beginning loop over 1139 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Jan 6 17:09:14 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 14 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1220.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 126 2 8 96 3 5 76 4 3 35 5 3 48 6 6 47 7 10 66 8 17 124 9 5 93 10 12 140 11 13 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 77 84 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 74 28 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 77 28 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 72 40 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 78 27 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 303 15 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 65 71 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 298 109 plFiberPlate : 69 possible sky positions to use as objects from a possible 448. plFiberPlate : 50 possible sky positions to use as objects from a possible 447. plFiberPlate : 26 possible sky positions to use as objects from a possible 446. plFiberPlate : 15 possible sky positions to use as objects from a possible 445. plFiberPlate : 14 possible sky positions to use as objects from a possible 444. plFiberPlate : 33 possible sky positions to use as objects from a possible 443. plFiberPlate : 42 possible sky positions to use as objects from a possible 442. plFiberPlate : 35 possible sky positions to use as objects from a possible 441. plFiberPlate : 28 possible sky positions to use as objects from a possible 440. plFiberPlate : 19 possible sky positions to use as objects from a possible 439. plFiberPlate : 11 possible sky positions to use as objects from a possible 438. plFiberPlate : 6 possible sky positions to use as objects from a possible 437. plFiberPlate : 6 possible sky positions to use as objects from a possible 436. plFiberPlate : 20 possible sky positions to use as objects from a possible 435. plFiberPlate : 10 possible sky positions to use as objects from a possible 434. plFiberPlate : 33 possible sky positions to use as objects from a possible 433. plFiberPlate : 28 possible sky positions to use as objects from a possible 432. plFiberPlate : 23 possible sky positions to use as objects from a possible 431. plFiberPlate : 17 possible sky positions to use as objects from a possible 430. plFiberPlate : 13 possible sky positions to use as objects from a possible 429. plFiberPlate : 7 possible sky positions to use as objects from a possible 428. plFiberPlate : 2 possible sky positions to use as objects from a possible 427. plFiberPlate : 9 possible sky positions to use as objects from a possible 426. plFiberPlate : 14 possible sky positions to use as objects from a possible 425. plFiberPlate : 69 possible sky positions to use as objects from a possible 424. plFiberPlate : 31 possible sky positions to use as objects from a possible 423. plFiberPlate : 14 possible sky positions to use as objects from a possible 422. plFiberPlate : 6 possible sky positions to use as objects from a possible 421. plFiberPlate : 6 possible sky positions to use as objects from a possible 420. plFiberPlate : 4 possible sky positions to use as objects from a possible 419. plFiberPlate : 8 possible sky positions to use as objects from a possible 418. plFiberPlate : 19 possible sky positions to use as objects from a possible 417. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1220.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1220.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1221.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 124 2 18 89 3 13 94 4 19 106 5 10 108 6 5 60 7 3 66 8 9 107 9 4 106 10 17 143 11 15 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 88 8 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 83 61 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 317 12 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 87 29 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 312 45 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 80 31 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 87 38 plFiberPlate : adding spectro-photo std with objId = 3525 20 3 83 30 plFiberPlate : 117 possible sky positions to use as objects from a possible 560. plFiberPlate : 72 possible sky positions to use as objects from a possible 559. plFiberPlate : 46 possible sky positions to use as objects from a possible 558. plFiberPlate : 31 possible sky positions to use as objects from a possible 557. plFiberPlate : 24 possible sky positions to use as objects from a possible 556. plFiberPlate : 25 possible sky positions to use as objects from a possible 555. plFiberPlate : 42 possible sky positions to use as objects from a possible 554. plFiberPlate : 84 possible sky positions to use as objects from a possible 553. plFiberPlate : 46 possible sky positions to use as objects from a possible 552. plFiberPlate : 40 possible sky positions to use as objects from a possible 551. plFiberPlate : 27 possible sky positions to use as objects from a possible 550. plFiberPlate : 14 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 6 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 61 possible sky positions to use as objects from a possible 545. plFiberPlate : 86 possible sky positions to use as objects from a possible 544. plFiberPlate : 60 possible sky positions to use as objects from a possible 543. plFiberPlate : 38 possible sky positions to use as objects from a possible 542. plFiberPlate : 40 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 7 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 52 possible sky positions to use as objects from a possible 536. plFiberPlate : 30 possible sky positions to use as objects from a possible 535. plFiberPlate : 34 possible sky positions to use as objects from a possible 534. plFiberPlate : 29 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 7 possible sky positions to use as objects from a possible 530. plFiberPlate : 8 possible sky positions to use as objects from a possible 529. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1220.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1221.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1221.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1222.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 103 2 6 54 3 12 63 4 16 100 5 9 119 6 7 78 7 4 79 8 4 104 9 3 117 10 16 126 11 13 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 105 61 plFiberPlate : adding spectro-photo std with objId = 3031 20 1 328 47 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 99 17 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 96 85 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 101 7 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 101 67 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 97 37 plFiberPlate : adding spectro-photo std with objId = 3525 20 3 101 6 plFiberPlate : 99 possible sky positions to use as objects from a possible 526. plFiberPlate : 66 possible sky positions to use as objects from a possible 525. plFiberPlate : 24 possible sky positions to use as objects from a possible 524. plFiberPlate : 36 possible sky positions to use as objects from a possible 523. plFiberPlate : 19 possible sky positions to use as objects from a possible 522. plFiberPlate : 21 possible sky positions to use as objects from a possible 521. plFiberPlate : 33 possible sky positions to use as objects from a possible 520. plFiberPlate : 72 possible sky positions to use as objects from a possible 519. plFiberPlate : 67 possible sky positions to use as objects from a possible 518. plFiberPlate : 34 possible sky positions to use as objects from a possible 517. plFiberPlate : 10 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 27 possible sky positions to use as objects from a possible 512. plFiberPlate : 14 possible sky positions to use as objects from a possible 511. plFiberPlate : 90 possible sky positions to use as objects from a possible 510. plFiberPlate : 56 possible sky positions to use as objects from a possible 509. plFiberPlate : 27 possible sky positions to use as objects from a possible 508. plFiberPlate : 19 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 15 possible sky positions to use as objects from a possible 505. plFiberPlate : 14 possible sky positions to use as objects from a possible 504. plFiberPlate : 11 possible sky positions to use as objects from a possible 503. plFiberPlate : 19 possible sky positions to use as objects from a possible 502. plFiberPlate : 55 possible sky positions to use as objects from a possible 501. plFiberPlate : 50 possible sky positions to use as objects from a possible 500. plFiberPlate : 29 possible sky positions to use as objects from a possible 499. plFiberPlate : 22 possible sky positions to use as objects from a possible 498. plFiberPlate : 14 possible sky positions to use as objects from a possible 497. plFiberPlate : 12 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1221.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1222.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1222.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1223.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 117 2 6 69 3 6 71 4 15 122 5 11 116 6 4 57 7 3 67 8 3 101 9 4 103 10 12 134 11 9 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 3 114 54 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 338 29 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 118 2 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 110 14 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 345 74 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 111 21 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 342 19 plFiberPlate : adding spectro-photo std with objId = 3525 20 3 113 59 plFiberPlate : 112 possible sky positions to use as objects from a possible 545. plFiberPlate : 77 possible sky positions to use as objects from a possible 544. plFiberPlate : 56 possible sky positions to use as objects from a possible 543. plFiberPlate : 44 possible sky positions to use as objects from a possible 542. plFiberPlate : 23 possible sky positions to use as objects from a possible 541. plFiberPlate : 39 possible sky positions to use as objects from a possible 540. plFiberPlate : 34 possible sky positions to use as objects from a possible 539. plFiberPlate : 56 possible sky positions to use as objects from a possible 538. plFiberPlate : 34 possible sky positions to use as objects from a possible 537. plFiberPlate : 20 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 16 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 7 possible sky positions to use as objects from a possible 531. plFiberPlate : 22 possible sky positions to use as objects from a possible 530. plFiberPlate : 67 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 11 possible sky positions to use as objects from a possible 526. plFiberPlate : 12 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 10 possible sky positions to use as objects from a possible 523. plFiberPlate : 12 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 25 possible sky positions to use as objects from a possible 520. plFiberPlate : 27 possible sky positions to use as objects from a possible 519. plFiberPlate : 16 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : 3 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 17 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1222.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1223.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1223.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1224.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 128 2 5 82 3 5 76 4 10 129 5 5 141 6 3 81 7 5 64 8 8 78 9 4 117 10 6 150 11 8 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 135 31 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 125 100 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 136 14 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 133 31 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 362 26 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 130 68 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 366 62 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 134 56 plFiberPlate : 142 possible sky positions to use as objects from a possible 579. plFiberPlate : 66 possible sky positions to use as objects from a possible 578. plFiberPlate : 28 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 32 possible sky positions to use as objects from a possible 575. plFiberPlate : 27 possible sky positions to use as objects from a possible 574. plFiberPlate : 47 possible sky positions to use as objects from a possible 573. plFiberPlate : 98 possible sky positions to use as objects from a possible 572. plFiberPlate : 32 possible sky positions to use as objects from a possible 571. plFiberPlate : 17 possible sky positions to use as objects from a possible 570. plFiberPlate : 9 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 12 possible sky positions to use as objects from a possible 564. plFiberPlate : 54 possible sky positions to use as objects from a possible 563. plFiberPlate : 26 possible sky positions to use as objects from a possible 562. plFiberPlate : 20 possible sky positions to use as objects from a possible 561. plFiberPlate : 15 possible sky positions to use as objects from a possible 560. plFiberPlate : 5 possible sky positions to use as objects from a possible 559. plFiberPlate : 1 possible sky positions to use as objects from a possible 558. plFiberPlate : 1 possible sky positions to use as objects from a possible 557. plFiberPlate : 2 possible sky positions to use as objects from a possible 556. plFiberPlate : 0 possible sky positions to use as objects from a possible 555. plFiberPlate: No sky found for bundle at 292.245 99.316, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 555. plFiberPlate : 59 possible sky positions to use as objects from a possible 554. plFiberPlate : 31 possible sky positions to use as objects from a possible 553. plFiberPlate : 13 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 17 possible sky positions to use as objects from a possible 550. plFiberPlate : 5 possible sky positions to use as objects from a possible 549. plFiberPlate : 4 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1223.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1224.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1224.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1225.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 130 2 4 79 3 2 65 4 8 118 5 12 106 6 8 63 7 6 80 8 8 105 9 12 103 10 12 151 11 9 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 3 130 72 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 377 22 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 363 69 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 135 31 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 136 14 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 130 68 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 366 62 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 134 56 plFiberPlate : 131 possible sky positions to use as objects from a possible 551. plFiberPlate : 56 possible sky positions to use as objects from a possible 550. plFiberPlate : 31 possible sky positions to use as objects from a possible 549. plFiberPlate : 12 possible sky positions to use as objects from a possible 548. plFiberPlate : 34 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 58 possible sky positions to use as objects from a possible 545. plFiberPlate : 96 possible sky positions to use as objects from a possible 544. plFiberPlate : 72 possible sky positions to use as objects from a possible 543. plFiberPlate : 42 possible sky positions to use as objects from a possible 542. plFiberPlate : 21 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : 62 possible sky positions to use as objects from a possible 535. plFiberPlate : 31 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 9 possible sky positions to use as objects from a possible 532. plFiberPlate : 8 possible sky positions to use as objects from a possible 531. plFiberPlate : 21 possible sky positions to use as objects from a possible 530. plFiberPlate : 12 possible sky positions to use as objects from a possible 529. plFiberPlate : 20 possible sky positions to use as objects from a possible 528. plFiberPlate : 18 possible sky positions to use as objects from a possible 527. plFiberPlate : 23 possible sky positions to use as objects from a possible 526. plFiberPlate : 13 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 7 possible sky positions to use as objects from a possible 523. plFiberPlate : 1 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 30 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1224.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1225.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1225.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1226.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 124 2 11 69 3 6 66 4 6 103 5 9 95 6 3 68 7 3 75 8 7 116 9 1 110 10 19 144 11 18 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 3 156 50 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 149 40 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 139 55 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 151 33 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 146 20 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 147 41 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 381 101 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 387 82 plFiberPlate : 116 possible sky positions to use as objects from a possible 543. plFiberPlate : 79 possible sky positions to use as objects from a possible 542. plFiberPlate : 48 possible sky positions to use as objects from a possible 541. plFiberPlate : 20 possible sky positions to use as objects from a possible 540. plFiberPlate : 26 possible sky positions to use as objects from a possible 539. plFiberPlate : 39 possible sky positions to use as objects from a possible 538. plFiberPlate : 55 possible sky positions to use as objects from a possible 537. plFiberPlate : 89 possible sky positions to use as objects from a possible 536. plFiberPlate : 59 possible sky positions to use as objects from a possible 535. plFiberPlate : 44 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 25 possible sky positions to use as objects from a possible 530. plFiberPlate : 51 possible sky positions to use as objects from a possible 529. plFiberPlate : 20 possible sky positions to use as objects from a possible 528. plFiberPlate : 51 possible sky positions to use as objects from a possible 527. plFiberPlate : 65 possible sky positions to use as objects from a possible 526. plFiberPlate : 40 possible sky positions to use as objects from a possible 525. plFiberPlate : 43 possible sky positions to use as objects from a possible 524. plFiberPlate : 18 possible sky positions to use as objects from a possible 523. plFiberPlate : 11 possible sky positions to use as objects from a possible 522. plFiberPlate : 6 possible sky positions to use as objects from a possible 521. plFiberPlate : 22 possible sky positions to use as objects from a possible 520. plFiberPlate : 41 possible sky positions to use as objects from a possible 519. plFiberPlate : 26 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 7 possible sky positions to use as objects from a possible 515. plFiberPlate : 4 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 16 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1225.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1226.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1226.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1227.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 134 2 9 79 3 10 75 4 14 109 5 7 129 6 3 75 7 5 63 8 6 106 9 5 107 10 16 141 11 14 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 382 30 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 161 6 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 393 67 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 161 17 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 161 21 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 394 41 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 387 82 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 397 70 plFiberPlate : 130 possible sky positions to use as objects from a possible 561. plFiberPlate : 73 possible sky positions to use as objects from a possible 560. plFiberPlate : 31 possible sky positions to use as objects from a possible 559. plFiberPlate : 9 possible sky positions to use as objects from a possible 558. plFiberPlate : 24 possible sky positions to use as objects from a possible 557. plFiberPlate : 21 possible sky positions to use as objects from a possible 556. plFiberPlate : 74 possible sky positions to use as objects from a possible 555. plFiberPlate : 66 possible sky positions to use as objects from a possible 554. plFiberPlate : 49 possible sky positions to use as objects from a possible 553. plFiberPlate : 24 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 12 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 22 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 75 possible sky positions to use as objects from a possible 545. plFiberPlate : 63 possible sky positions to use as objects from a possible 544. plFiberPlate : 33 possible sky positions to use as objects from a possible 543. plFiberPlate : 19 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 11 possible sky positions to use as objects from a possible 538. plFiberPlate : 19 possible sky positions to use as objects from a possible 537. plFiberPlate : 42 possible sky positions to use as objects from a possible 536. plFiberPlate : 27 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 3 possible sky positions to use as objects from a possible 533. plFiberPlate : 3 possible sky positions to use as objects from a possible 532. plFiberPlate : 5 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1226.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1227.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1227.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1228.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 136 2 7 80 3 8 77 4 16 108 5 9 124 6 7 82 7 6 74 8 7 102 9 10 93 10 22 138 11 20 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 172 65 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 168 70 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 163 36 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 393 67 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 403 119 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 171 26 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 394 41 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 397 70 plFiberPlate : 131 possible sky positions to use as objects from a possible 558. plFiberPlate : 81 possible sky positions to use as objects from a possible 557. plFiberPlate : 49 possible sky positions to use as objects from a possible 556. plFiberPlate : 24 possible sky positions to use as objects from a possible 555. plFiberPlate : 23 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 88 possible sky positions to use as objects from a possible 552. plFiberPlate : 80 possible sky positions to use as objects from a possible 551. plFiberPlate : 58 possible sky positions to use as objects from a possible 550. plFiberPlate : 61 possible sky positions to use as objects from a possible 549. plFiberPlate : 34 possible sky positions to use as objects from a possible 548. plFiberPlate : 14 possible sky positions to use as objects from a possible 547. plFiberPlate : 7 possible sky positions to use as objects from a possible 546. plFiberPlate : 18 possible sky positions to use as objects from a possible 545. plFiberPlate : 27 possible sky positions to use as objects from a possible 544. plFiberPlate : 40 possible sky positions to use as objects from a possible 543. plFiberPlate : 52 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 22 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : 8 possible sky positions to use as objects from a possible 538. plFiberPlate : 6 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 8 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 46 possible sky positions to use as objects from a possible 533. plFiberPlate : 21 possible sky positions to use as objects from a possible 532. plFiberPlate : 17 possible sky positions to use as objects from a possible 531. plFiberPlate : 10 possible sky positions to use as objects from a possible 530. plFiberPlate : 3 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1227.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1228.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1228.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1229.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 123 2 11 83 3 12 90 4 18 112 5 6 114 6 5 69 7 3 71 8 8 106 9 3 99 10 15 145 11 13 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 422 11 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 411 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 1 412 38 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 188 6 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 182 27 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 422 71 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 418 26 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 422 79 plFiberPlate : 142 possible sky positions to use as objects from a possible 554. plFiberPlate : 55 possible sky positions to use as objects from a possible 553. plFiberPlate : 31 possible sky positions to use as objects from a possible 552. plFiberPlate : 20 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 76 possible sky positions to use as objects from a possible 548. plFiberPlate : 80 possible sky positions to use as objects from a possible 547. plFiberPlate : 49 possible sky positions to use as objects from a possible 546. plFiberPlate : 25 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 6 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 9 possible sky positions to use as objects from a possible 540. plFiberPlate : 43 possible sky positions to use as objects from a possible 539. plFiberPlate : 61 possible sky positions to use as objects from a possible 538. plFiberPlate : 46 possible sky positions to use as objects from a possible 537. plFiberPlate : 30 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : 8 possible sky positions to use as objects from a possible 534. plFiberPlate : 6 possible sky positions to use as objects from a possible 533. plFiberPlate : 5 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 25 possible sky positions to use as objects from a possible 530. plFiberPlate : 46 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 23 possible sky positions to use as objects from a possible 527. plFiberPlate : 8 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 20 possible sky positions to use as objects from a possible 523. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1228.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1229.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1229.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1230.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 103 2 9 69 3 10 75 4 14 105 5 11 129 6 8 87 7 6 79 8 17 105 9 13 106 10 19 143 11 14 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 203 22 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 195 40 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 421 93 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 199 54 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 193 6 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 202 35 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 422 79 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 422 71 plFiberPlate : 117 possible sky positions to use as objects from a possible 548. plFiberPlate : 83 possible sky positions to use as objects from a possible 547. plFiberPlate : 32 possible sky positions to use as objects from a possible 546. plFiberPlate : 38 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 25 possible sky positions to use as objects from a possible 543. plFiberPlate : 34 possible sky positions to use as objects from a possible 542. plFiberPlate : 81 possible sky positions to use as objects from a possible 541. plFiberPlate : 47 possible sky positions to use as objects from a possible 540. plFiberPlate : 53 possible sky positions to use as objects from a possible 539. plFiberPlate : 23 possible sky positions to use as objects from a possible 538. plFiberPlate : 20 possible sky positions to use as objects from a possible 537. plFiberPlate : 17 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 67 possible sky positions to use as objects from a possible 532. plFiberPlate : 36 possible sky positions to use as objects from a possible 531. plFiberPlate : 34 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 18 possible sky positions to use as objects from a possible 528. plFiberPlate : 13 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : 4 possible sky positions to use as objects from a possible 524. plFiberPlate : 61 possible sky positions to use as objects from a possible 523. plFiberPlate : 34 possible sky positions to use as objects from a possible 522. plFiberPlate : 25 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 13 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 24 possible sky positions to use as objects from a possible 517. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1229.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1230.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1230.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1231.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 118 2 7 66 3 5 67 4 15 109 5 13 130 6 7 79 7 6 83 8 3 107 9 6 107 10 17 131 11 12 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 202 15 plFiberPlate : adding spectro-photo std with objId = 3525 20 1 203 22 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 200 34 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 440 12 plFiberPlate : adding spectro-photo std with objId = 3525 20 4 214 56 plFiberPlate : adding spectro-photo std with objId = 3525 20 5 202 35 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 445 9 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 444 24 plFiberPlate : 105 possible sky positions to use as objects from a possible 551. plFiberPlate : 57 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 27 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 11 possible sky positions to use as objects from a possible 546. plFiberPlate : 48 possible sky positions to use as objects from a possible 545. plFiberPlate : 92 possible sky positions to use as objects from a possible 544. plFiberPlate : 66 possible sky positions to use as objects from a possible 543. plFiberPlate : 34 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 11 possible sky positions to use as objects from a possible 540. plFiberPlate : 20 possible sky positions to use as objects from a possible 539. plFiberPlate : 20 possible sky positions to use as objects from a possible 538. plFiberPlate : 22 possible sky positions to use as objects from a possible 537. plFiberPlate : 28 possible sky positions to use as objects from a possible 536. plFiberPlate : 88 possible sky positions to use as objects from a possible 535. plFiberPlate : 39 possible sky positions to use as objects from a possible 534. plFiberPlate : 23 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 19 possible sky positions to use as objects from a possible 531. plFiberPlate : 7 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 23 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 51 possible sky positions to use as objects from a possible 526. plFiberPlate : 29 possible sky positions to use as objects from a possible 525. plFiberPlate : 25 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 27 possible sky positions to use as objects from a possible 521. plFiberPlate : 18 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1230.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1231.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1231.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1232.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 121 2 11 68 3 7 67 4 12 97 5 7 120 6 6 75 7 9 68 8 10 106 9 7 103 10 14 136 11 15 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 1 456 11 plFiberPlate : adding spectro-photo std with objId = 3031 20 1 454 52 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 451 64 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 222 26 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 225 2 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 445 9 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 453 2 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 444 24 plFiberPlate : 102 possible sky positions to use as objects from a possible 533. plFiberPlate : 84 possible sky positions to use as objects from a possible 532. plFiberPlate : 65 possible sky positions to use as objects from a possible 531. plFiberPlate : 24 possible sky positions to use as objects from a possible 530. plFiberPlate : 18 possible sky positions to use as objects from a possible 529. plFiberPlate : 30 possible sky positions to use as objects from a possible 528. plFiberPlate : 50 possible sky positions to use as objects from a possible 527. plFiberPlate : 70 possible sky positions to use as objects from a possible 526. plFiberPlate : 65 possible sky positions to use as objects from a possible 525. plFiberPlate : 45 possible sky positions to use as objects from a possible 524. plFiberPlate : 36 possible sky positions to use as objects from a possible 523. plFiberPlate : 16 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 28 possible sky positions to use as objects from a possible 520. plFiberPlate : 22 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 83 possible sky positions to use as objects from a possible 517. plFiberPlate : 58 possible sky positions to use as objects from a possible 516. plFiberPlate : 28 possible sky positions to use as objects from a possible 515. plFiberPlate : 16 possible sky positions to use as objects from a possible 514. plFiberPlate : 7 possible sky positions to use as objects from a possible 513. plFiberPlate : 6 possible sky positions to use as objects from a possible 512. plFiberPlate : 26 possible sky positions to use as objects from a possible 511. plFiberPlate : 27 possible sky positions to use as objects from a possible 510. plFiberPlate : 23 possible sky positions to use as objects from a possible 509. plFiberPlate : 49 possible sky positions to use as objects from a possible 508. plFiberPlate : 24 possible sky positions to use as objects from a possible 507. plFiberPlate : 7 possible sky positions to use as objects from a possible 506. plFiberPlate : 3 possible sky positions to use as objects from a possible 505. plFiberPlate : 8 possible sky positions to use as objects from a possible 504. plFiberPlate : 6 possible sky positions to use as objects from a possible 503. plFiberPlate : 27 possible sky positions to use as objects from a possible 502. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1231.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1232.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1232.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.2/plPlugMapP-1233.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 57 2 7 60 3 11 75 4 15 102 5 9 123 6 8 78 7 4 55 8 5 53 9 8 97 10 20 128 11 11 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 1 466 90 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 222 26 plFiberPlate : adding spectro-photo std with objId = 3525 20 6 232 34 plFiberPlate : adding spectro-photo std with objId = 3525 20 2 225 2 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 466 11 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 453 2 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 460 92 plFiberPlate : adding spectro-photo std with objId = 3031 20 1 458 23 plFiberPlate : 110 possible sky positions to use as objects from a possible 428. plFiberPlate : 74 possible sky positions to use as objects from a possible 427. plFiberPlate : 36 possible sky positions to use as objects from a possible 426. plFiberPlate : 19 possible sky positions to use as objects from a possible 425. plFiberPlate : 18 possible sky positions to use as objects from a possible 424. plFiberPlate : 18 possible sky positions to use as objects from a possible 423. plFiberPlate : 24 possible sky positions to use as objects from a possible 422. plFiberPlate : 66 possible sky positions to use as objects from a possible 421. plFiberPlate : 47 possible sky positions to use as objects from a possible 420. plFiberPlate : 34 possible sky positions to use as objects from a possible 419. plFiberPlate : 6 possible sky positions to use as objects from a possible 418. plFiberPlate : 1 possible sky positions to use as objects from a possible 417. plFiberPlate : 3 possible sky positions to use as objects from a possible 416. plFiberPlate : 8 possible sky positions to use as objects from a possible 415. plFiberPlate : 5 possible sky positions to use as objects from a possible 414. plFiberPlate : 6 possible sky positions to use as objects from a possible 413. plFiberPlate : 61 possible sky positions to use as objects from a possible 412. plFiberPlate : 48 possible sky positions to use as objects from a possible 411. plFiberPlate : 15 possible sky positions to use as objects from a possible 410. plFiberPlate : 6 possible sky positions to use as objects from a possible 409. plFiberPlate : 3 possible sky positions to use as objects from a possible 408. plFiberPlate : 4 possible sky positions to use as objects from a possible 407. plFiberPlate : 14 possible sky positions to use as objects from a possible 406. plFiberPlate : 4 possible sky positions to use as objects from a possible 405. plFiberPlate : 8 possible sky positions to use as objects from a possible 404. plFiberPlate : 45 possible sky positions to use as objects from a possible 403. plFiberPlate : 23 possible sky positions to use as objects from a possible 402. plFiberPlate : 11 possible sky positions to use as objects from a possible 401. plFiberPlate : 10 possible sky positions to use as objects from a possible 400. plFiberPlate : 4 possible sky positions to use as objects from a possible 399. plFiberPlate : 6 possible sky positions to use as objects from a possible 398. plFiberPlate : 7 possible sky positions to use as objects from a possible 397. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1232.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1233.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.2/plOverlay-1233.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Jan 6 17:09:53 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 14 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1220.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1220.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1220.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1221.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0776,-3.6248) and (-12.59,-2.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1221.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1221.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1222.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1222.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1222.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1223.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1223.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1223.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1224.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1224.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1224.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1225.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1225.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1225.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1226.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1226.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1226.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1227.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5489,5.3949) and (-11.94,4.19) plMakeFanucCodes : fixed path between (12.2866,-3.5894) and (12.44,-2.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1227.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1227.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1228.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5556,-7.2380) and (-11.25,-6.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1228.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1228.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1229.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1229.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1229.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1230.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1230.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1230.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1231.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1231.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1231.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1232.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.3911,-10.4371) and (6.31,-10.83) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1232.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1232.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1233.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1233.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.2/plFanuc-1233.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Jan 6 17:11:03 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e456e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 14 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1220 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1221 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1222 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1223 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1224 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1225 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1226 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1227 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1228 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1229 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1230 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1231 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1232 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1233 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Jan 6 17:11:24 CST 2003 Begin running plateEnder dr2003.01.2 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.01.2 -morePipes 1 failed. PS: Read file for stderr output of this job.