Sender: LSF System Subject: Job 83307: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Aug 4 10:50:55 2003 Results reported at Mon Aug 4 10:58:58 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_31 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.08.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 440.85 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Aug 4 10:51:01 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Aug 4 10:51:01 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_2/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v2_20/Linux:/fnal/ups/prd/ups/v4_6Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_0/Linux/bin:/sdss/ups/prd/photo/v5_4_25/Linux/bin:/sdss/ups/prd/specflat/v1_4/Linux/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_9_7/Linux/bin:/sdss/ups/prd/idlspec2d/v4_9_8/Linux/bin:/sdss/ups/prd/spectro/v5_7_7/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_31/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Mon Aug 4 10:51:01 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_31/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_9_8/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_9_7/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_25/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_4/Linux SPECTRO_DIR=/sdss/ups/prd/spectro/v5_7_7/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_upIBOv --------------------------------------------------------------- --------------------------------------------------------------- Mon Aug 4 10:51:01 CDT 2003 Begin running plate --------------------------------------------------------------- Mon Aug 4 10:51:01 CDT 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_31/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_31/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bb42b4 makePlates : beginning loop over plObs chain; makePlates : making 57 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9379.par makePlates : plateInfo struct for plate 1473 : (h4).mjd 52909 (h4).raCen 327.9088 (h4).decCen -0.001687655 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 327.909 -0.002 327.909 1.498 plMakePlateFromTile : mjd of obs : 52909.572770 Observed HA/dec of plate center, fiducial point (deg) : -10.000 0.027 -10.000 1.526 The rotation angle of the fid. point is 15.091649 plMakePlateFromTile : beginning loop over 1269 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9380.par makePlates : plateInfo struct for plate 1474 : (h4).mjd 52909 (h4).raCen 329.7463 (h4).decCen -0.04405917 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 329.746 -0.044 329.746 1.456 plMakePlateFromTile : mjd of obs : 52909.575090 Observed HA/dec of plate center, fiducial point (deg) : -11.000 -0.015 -11.000 1.484 The rotation angle of the fid. point is 16.489348 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9381.par makePlates : plateInfo struct for plate 1475 : (h4).mjd 52909 (h4).raCen 331.7918 (h4).decCen -0.002810331 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 331.792 -0.003 331.792 1.497 plMakePlateFromTile : mjd of obs : 52909.655573 Observed HA/dec of plate center, fiducial point (deg) : 16.000 0.026 16.000 1.526 The rotation angle of the fid. point is -23.200528 plMakePlateFromTile : beginning loop over 1335 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-3.00, 124.66, 8.4) and (-3.00, 124.68, 8.0) checkLTHo : distance = 0.016, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-3.00, 124.66, 8.4) makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9382.par makePlates : plateInfo struct for plate 1476 : (h4).mjd 52909 (h4).raCen 333.6772 (h4).decCen -0.01926675 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 333.677 -0.019 333.677 1.481 plMakePlateFromTile : mjd of obs : 52909.658025 Observed HA/dec of plate center, fiducial point (deg) : 15.000 0.010 15.000 1.510 The rotation angle of the fid. point is -21.914294 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9383.par makePlates : plateInfo struct for plate 1477 : (h4).mjd 52909 (h4).raCen 335.6154 (h4).decCen -0.01811701 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 335.615 -0.018 335.615 1.482 plMakePlateFromTile : mjd of obs : 52909.657853 Observed HA/dec of plate center, fiducial point (deg) : 13.000 0.012 13.000 1.511 The rotation angle of the fid. point is -19.272968 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9384.par makePlates : plateInfo struct for plate 1478 : (h4).mjd 52909 (h4).raCen 337.5379 (h4).decCen -0.03851777 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 337.538 -0.039 337.538 1.461 plMakePlateFromTile : mjd of obs : 52909.657637 Observed HA/dec of plate center, fiducial point (deg) : 11.000 -0.009 11.000 1.491 The rotation angle of the fid. point is -16.512274 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9385.par makePlates : plateInfo struct for plate 1479 : (h4).mjd 52909 (h4).raCen 339.4729 (h4).decCen -0.01993779 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 339.473 -0.020 339.473 1.480 plMakePlateFromTile : mjd of obs : 52909.657455 Observed HA/dec of plate center, fiducial point (deg) : 9.000 0.010 9.000 1.510 The rotation angle of the fid. point is -13.667731 plMakePlateFromTile : beginning loop over 1335 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9386.par makePlates : plateInfo struct for plate 1480 : (h4).mjd 52909 (h4).raCen 341.4107 (h4).decCen -0.03790142 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 341.411 -0.038 341.411 1.462 plMakePlateFromTile : mjd of obs : 52909.657281 Observed HA/dec of plate center, fiducial point (deg) : 7.000 -0.007 7.000 1.492 The rotation angle of the fid. point is -10.723393 plMakePlateFromTile : beginning loop over 1305 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9387.par makePlates : plateInfo struct for plate 1481 : (h4).mjd 52909 (h4).raCen 343.3698 (h4).decCen 0.03058727 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 343.370 0.031 343.370 1.531 plMakePlateFromTile : mjd of obs : 52909.657167 Observed HA/dec of plate center, fiducial point (deg) : 5.000 0.061 5.000 1.561 The rotation angle of the fid. point is -7.728404 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9388.par makePlates : plateInfo struct for plate 1482 : (h4).mjd 52909 (h4).raCen 345.3461 (h4).decCen 0.009751099 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 345.346 0.010 345.346 1.510 plMakePlateFromTile : mjd of obs : 52909.659871 Observed HA/dec of plate center, fiducial point (deg) : 4.000 0.041 4.000 1.540 The rotation angle of the fid. point is -6.196376 plMakePlateFromTile : beginning loop over 1298 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9389.par makePlates : plateInfo struct for plate 1483 : (h4).mjd 52909 (h4).raCen 347.3576 (h4).decCen -0.005103788 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 347.358 -0.005 347.358 1.495 plMakePlateFromTile : mjd of obs : 52909.659901 Observed HA/dec of plate center, fiducial point (deg) : 2.000 0.026 2.000 1.525 The rotation angle of the fid. point is -3.110506 plMakePlateFromTile : beginning loop over 1265 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9390.par makePlates : plateInfo struct for plate 1484 : (h4).mjd 52909 (h4).raCen 349.2559 (h4).decCen 0.0289275 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 349.256 0.029 349.256 1.529 plMakePlateFromTile : mjd of obs : 52909.659618 Observed HA/dec of plate center, fiducial point (deg) : 0.000 0.060 0.000 1.560 The rotation angle of the fid. point is -0.005229 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9391.par makePlates : plateInfo struct for plate 1485 : (h4).mjd 52909 (h4).raCen 351.2021 (h4).decCen 0.1140562 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 351.202 0.114 351.202 1.614 plMakePlateFromTile : mjd of obs : 52909.701032 Observed HA/dec of plate center, fiducial point (deg) : 13.000 0.146 13.000 1.645 The rotation angle of the fid. point is -19.331499 plMakePlateFromTile : beginning loop over 1286 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9392.par makePlates : plateInfo struct for plate 1486 : (h4).mjd 52909 (h4).raCen 353.2949 (h4).decCen -0.03979917 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 353.295 -0.040 353.295 1.460 plMakePlateFromTile : mjd of obs : 52909.701288 Observed HA/dec of plate center, fiducial point (deg) : 11.000 -0.008 11.000 1.491 The rotation angle of the fid. point is -16.507487 plMakePlateFromTile : beginning loop over 1301 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9393.par makePlates : plateInfo struct for plate 1487 : (h4).mjd 52909 (h4).raCen 355.3896 (h4).decCen 0.04444777 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 355.390 0.044 355.390 1.544 plMakePlateFromTile : mjd of obs : 52909.701549 Observed HA/dec of plate center, fiducial point (deg) : 9.000 0.076 9.000 1.576 The rotation angle of the fid. point is -13.685888 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9394.par makePlates : plateInfo struct for plate 1488 : (h4).mjd 52909 (h4).raCen 357.6322 (h4).decCen 0.05404552 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 357.632 0.054 357.632 1.554 plMakePlateFromTile : mjd of obs : 52909.702219 Observed HA/dec of plate center, fiducial point (deg) : 7.000 0.086 7.000 1.585 The rotation angle of the fid. point is -10.744476 plMakePlateFromTile : beginning loop over 1268 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9395.par makePlates : plateInfo struct for plate 1489 : (h4).mjd 52909 (h4).raCen 359.8243 (h4).decCen 0.02427943 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 359.824 0.024 359.824 1.524 plMakePlateFromTile : mjd of obs : 52909.702750 Observed HA/dec of plate center, fiducial point (deg) : 5.000 0.056 5.000 1.556 The rotation angle of the fid. point is -7.721984 plMakePlateFromTile : beginning loop over 1260 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9396.par makePlates : plateInfo struct for plate 1490 : (h4).mjd 52909 (h4).raCen 1.824648 (h4).decCen -0.00497782 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 1.825 -0.005 1.825 1.495 plMakePlateFromTile : mjd of obs : 52909.702743 Observed HA/dec of plate center, fiducial point (deg) : 2.998 0.027 2.998 1.526 The rotation angle of the fid. point is -4.647588 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9397.par makePlates : plateInfo struct for plate 1491 : (h4).mjd 52909 (h4).raCen 3.559816 (h4).decCen -0.02478762 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 3.560 -0.025 3.560 1.475 plMakePlateFromTile : mjd of obs : 52909.702007 Observed HA/dec of plate center, fiducial point (deg) : 0.998 0.007 0.998 1.507 The rotation angle of the fid. point is -1.549635 plMakePlateFromTile : beginning loop over 1272 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9398.par makePlates : plateInfo struct for plate 1492 : (h4).mjd 52909 (h4).raCen 5.222911 (h4).decCen -0.03324207 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 5.223 -0.033 5.223 1.467 plMakePlateFromTile : mjd of obs : 52909.742637 Observed HA/dec of plate center, fiducial point (deg) : 13.998 -0.001 13.998 1.498 The rotation angle of the fid. point is -20.589046 plMakePlateFromTile : beginning loop over 1258 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9399.par makePlates : plateInfo struct for plate 1493 : (h4).mjd 52909 (h4).raCen 6.996416 (h4).decCen 0.04528804 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 6.996 0.045 6.996 1.545 plMakePlateFromTile : mjd of obs : 52909.742008 Observed HA/dec of plate center, fiducial point (deg) : 11.998 0.077 11.998 1.577 The rotation angle of the fid. point is -17.926125 plMakePlateFromTile : beginning loop over 1249 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9400.par makePlates : plateInfo struct for plate 1494 : (h4).mjd 52909 (h4).raCen 8.895636 (h4).decCen -0.0020859 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 8.896 -0.002 8.896 1.498 plMakePlateFromTile : mjd of obs : 52909.783294 Observed HA/dec of plate center, fiducial point (deg) : 24.998 0.031 24.998 1.530 The rotation angle of the fid. point is -33.297645 plMakePlateFromTile : beginning loop over 1261 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9401.par makePlates : plateInfo struct for plate 1495 : (h4).mjd 52909 (h4).raCen 10.81877 (h4).decCen 0.0369102 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 10.819 0.037 10.819 1.537 plMakePlateFromTile : mjd of obs : 52909.783079 Observed HA/dec of plate center, fiducial point (deg) : 22.998 0.070 22.998 1.569 The rotation angle of the fid. point is -31.292289 plMakePlateFromTile : beginning loop over 1242 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9402.par makePlates : plateInfo struct for plate 1496 : (h4).mjd 52909 (h4).raCen 12.72755 (h4).decCen -0.0329822 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 12.728 -0.033 12.728 1.467 plMakePlateFromTile : mjd of obs : 52909.782824 Observed HA/dec of plate center, fiducial point (deg) : 20.998 -0.000 20.998 1.499 The rotation angle of the fid. point is -29.094918 plMakePlateFromTile : beginning loop over 1258 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9403.par makePlates : plateInfo struct for plate 1497 : (h4).mjd 52909 (h4).raCen 14.60911 (h4).decCen 0.01595267 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 14.609 0.016 14.609 1.516 plMakePlateFromTile : mjd of obs : 52909.782494 Observed HA/dec of plate center, fiducial point (deg) : 18.998 0.048 18.998 1.548 The rotation angle of the fid. point is -26.846130 plMakePlateFromTile : beginning loop over 1239 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9404.par makePlates : plateInfo struct for plate 1498 : (h4).mjd 52909 (h4).raCen 16.47033 (h4).decCen -0.003799525 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 16.470 -0.004 16.470 1.496 plMakePlateFromTile : mjd of obs : 52909.782108 Observed HA/dec of plate center, fiducial point (deg) : 16.998 0.028 16.998 1.528 The rotation angle of the fid. point is -24.431359 plMakePlateFromTile : beginning loop over 1264 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9405.par makePlates : plateInfo struct for plate 1499 : (h4).mjd 52909 (h4).raCen 18.2698 (h4).decCen 0.01847084 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 18.270 0.018 18.270 1.518 plMakePlateFromTile : mjd of obs : 52909.781551 Observed HA/dec of plate center, fiducial point (deg) : 14.998 0.050 14.998 1.550 The rotation angle of the fid. point is -21.917511 plMakePlateFromTile : beginning loop over 1254 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9406.par makePlates : plateInfo struct for plate 1500 : (h4).mjd 52909 (h4).raCen 19.83542 (h4).decCen 0.002187934 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 19.835 0.002 19.835 1.502 plMakePlateFromTile : mjd of obs : 52909.780345 Observed HA/dec of plate center, fiducial point (deg) : 12.998 0.034 12.998 1.533 The rotation angle of the fid. point is -19.265733 plMakePlateFromTile : beginning loop over 1265 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (25.19, -111.21, 6.3) and (25.23, -111.13, 6.7) checkLTHo : distance = 0.089, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(25.23, -111.13, 6.7) makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9407.par makePlates : plateInfo struct for plate 1501 : (h4).mjd 52909 (h4).raCen 21.66996 (h4).decCen 0.03756009 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.670 0.038 21.670 1.538 plMakePlateFromTile : mjd of obs : 52909.779885 Observed HA/dec of plate center, fiducial point (deg) : 10.998 0.069 10.998 1.568 The rotation angle of the fid. point is -16.526623 plMakePlateFromTile : beginning loop over 1239 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9408.par makePlates : plateInfo struct for plate 1502 : (h4).mjd 52909 (h4).raCen 23.63674 (h4).decCen 0.09153269 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 23.637 0.092 23.637 1.592 plMakePlateFromTile : mjd of obs : 52909.779792 Observed HA/dec of plate center, fiducial point (deg) : 8.998 0.123 8.997 1.622 The rotation angle of the fid. point is -13.689372 plMakePlateFromTile : beginning loop over 1243 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9409.par makePlates : plateInfo struct for plate 1503 : (h4).mjd 52909 (h4).raCen 25.82468 (h4).decCen -0.02084099 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 25.825 -0.021 25.825 1.479 plMakePlateFromTile : mjd of obs : 52909.783081 Observed HA/dec of plate center, fiducial point (deg) : 7.998 0.010 7.997 1.509 The rotation angle of the fid. point is -12.189456 plMakePlateFromTile : beginning loop over 1229 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9410.par makePlates : plateInfo struct for plate 1504 : (h4).mjd 52909 (h4).raCen 27.90636 (h4).decCen 0.001838769 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 27.906 0.002 27.906 1.502 plMakePlateFromTile : mjd of obs : 52909.824871 Observed HA/dec of plate center, fiducial point (deg) : 20.998 0.033 20.998 1.532 The rotation angle of the fid. point is -29.110613 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9411.par makePlates : plateInfo struct for plate 1505 : (h4).mjd 52909 (h4).raCen 29.81986 (h4).decCen 0.01017298 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 29.820 0.010 29.820 1.510 plMakePlateFromTile : mjd of obs : 52909.824630 Observed HA/dec of plate center, fiducial point (deg) : 18.998 0.041 18.998 1.540 The rotation angle of the fid. point is -26.836931 plMakePlateFromTile : beginning loop over 1240 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9412.par makePlates : plateInfo struct for plate 1506 : (h4).mjd 52909 (h4).raCen 31.64598 (h4).decCen -0.03524769 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 31.646 -0.035 31.646 1.465 plMakePlateFromTile : mjd of obs : 52909.824146 Observed HA/dec of plate center, fiducial point (deg) : 16.998 -0.005 16.997 1.495 The rotation angle of the fid. point is -24.408036 plMakePlateFromTile : beginning loop over 1223 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9413.par makePlates : plateInfo struct for plate 1507 : (h4).mjd 52909 (h4).raCen 33.68293 (h4).decCen -0.03286274 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 33.683 -0.033 33.683 1.467 plMakePlateFromTile : mjd of obs : 52909.824247 Observed HA/dec of plate center, fiducial point (deg) : 14.998 -0.003 14.997 1.496 The rotation angle of the fid. point is -21.885063 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9414.par makePlates : plateInfo struct for plate 1508 : (h4).mjd 52909 (h4).raCen 35.88296 (h4).decCen 0.1250122 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 35.883 0.125 35.883 1.625 plMakePlateFromTile : mjd of obs : 52909.824799 Observed HA/dec of plate center, fiducial point (deg) : 12.998 0.154 12.997 1.654 The rotation angle of the fid. point is -19.317888 plMakePlateFromTile : beginning loop over 1236 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9415.par makePlates : plateInfo struct for plate 1509 : (h4).mjd 52909 (h4).raCen 37.84602 (h4).decCen -0.0594068 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 37.846 -0.059 37.846 1.441 plMakePlateFromTile : mjd of obs : 52909.824694 Observed HA/dec of plate center, fiducial point (deg) : 10.998 -0.030 10.997 1.469 The rotation angle of the fid. point is -16.480481 plMakePlateFromTile : beginning loop over 1254 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (6.18, 251.26, 7.5) and (5.68, 250.64, 7.6) checkLTHo : distance = 0.800, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(5.68, 250.64, 7.6) makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9416.par makePlates : plateInfo struct for plate 1510 : (h4).mjd 52909 (h4).raCen 39.82235 (h4).decCen 0.03686306 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 39.822 0.037 39.822 1.537 plMakePlateFromTile : mjd of obs : 52909.827398 Observed HA/dec of plate center, fiducial point (deg) : 9.998 0.066 9.997 1.565 The rotation angle of the fid. point is -15.103842 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9417.par makePlates : plateInfo struct for plate 1511 : (h4).mjd 52909 (h4).raCen 41.99837 (h4).decCen 0.003951379 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 41.998 0.004 41.998 1.504 plMakePlateFromTile : mjd of obs : 52909.827884 Observed HA/dec of plate center, fiducial point (deg) : 7.998 0.032 7.997 1.531 The rotation angle of the fid. point is -12.191737 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9418.par makePlates : plateInfo struct for plate 1512 : (h4).mjd 52909 (h4).raCen 43.86164 (h4).decCen -0.01699091 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 43.862 -0.017 43.862 1.483 plMakePlateFromTile : mjd of obs : 52909.827503 Observed HA/dec of plate center, fiducial point (deg) : 5.998 0.011 5.997 1.510 The rotation angle of the fid. point is -9.207873 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9419.par makePlates : plateInfo struct for plate 1513 : (h4).mjd 52909 (h4).raCen 45.78709 (h4).decCen -0.01683827 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 45.787 -0.017 45.787 1.483 plMakePlateFromTile : mjd of obs : 52909.827295 Observed HA/dec of plate center, fiducial point (deg) : 3.998 0.011 3.997 1.510 The rotation angle of the fid. point is -6.168544 plMakePlateFromTile : beginning loop over 1254 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9420.par makePlates : plateInfo struct for plate 1514 : (h4).mjd 52909 (h4).raCen 47.73415 (h4).decCen 0.003511059 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 47.734 0.004 47.734 1.504 plMakePlateFromTile : mjd of obs : 52909.868711 Observed HA/dec of plate center, fiducial point (deg) : 16.998 0.031 16.997 1.530 The rotation angle of the fid. point is -24.423533 plMakePlateFromTile : beginning loop over 1236 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9421.par makePlates : plateInfo struct for plate 1515 : (h4).mjd 52909 (h4).raCen 49.68679 (h4).decCen 0.01529932 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 49.687 0.015 49.687 1.515 plMakePlateFromTile : mjd of obs : 52909.868578 Observed HA/dec of plate center, fiducial point (deg) : 14.998 0.042 14.997 1.541 The rotation angle of the fid. point is -21.904083 plMakePlateFromTile : beginning loop over 1273 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9422.par makePlates : plateInfo struct for plate 1516 : (h4).mjd 52909 (h4).raCen 51.63137 (h4).decCen -0.01181045 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 51.631 -0.012 51.631 1.488 plMakePlateFromTile : mjd of obs : 52909.868422 Observed HA/dec of plate center, fiducial point (deg) : 12.998 0.014 12.997 1.514 The rotation angle of the fid. point is -19.247496 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9423.par makePlates : plateInfo struct for plate 1517 : (h4).mjd 52909 (h4).raCen 53.5228 (h4).decCen 0.03069378 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 53.523 0.031 53.523 1.531 plMakePlateFromTile : mjd of obs : 52909.868120 Observed HA/dec of plate center, fiducial point (deg) : 10.998 0.056 10.997 1.556 The rotation angle of the fid. point is -16.512460 plMakePlateFromTile : beginning loop over 1284 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9424.par makePlates : plateInfo struct for plate 1518 : (h4).mjd 52909 (h4).raCen 55.49162 (h4).decCen 0.01375204 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 55.492 0.014 55.492 1.514 plMakePlateFromTile : mjd of obs : 52909.868031 Observed HA/dec of plate center, fiducial point (deg) : 8.998 0.039 8.997 1.538 The rotation angle of the fid. point is -13.651053 plMakePlateFromTile : beginning loop over 1179 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9425.par makePlates : plateInfo struct for plate 1519 : (h4).mjd 52909 (h4).raCen 325.8144 (h4).decCen -0.04689807 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 325.814 -0.047 325.814 1.453 plMakePlateFromTile : mjd of obs : 52909.614075 Observed HA/dec of plate center, fiducial point (deg) : 7.000 -0.019 7.000 1.480 The rotation angle of the fid. point is -10.724576 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9426.par makePlates : plateInfo struct for plate 1520 : (h4).mjd 52909 (h4).raCen 324.02 (h4).decCen -0.025976 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 324.020 -0.026 324.020 1.474 plMakePlateFromTile : mjd of obs : 52909.603561 Observed HA/dec of plate center, fiducial point (deg) : 5.000 0.001 5.000 1.501 The rotation angle of the fid. point is -7.721624 plMakePlateFromTile : beginning loop over 1271 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9427.par makePlates : plateInfo struct for plate 1521 : (h4).mjd 52909 (h4).raCen 322.4027 (h4).decCen 0.105343 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 322.403 0.105 322.403 1.605 plMakePlateFromTile : mjd of obs : 52909.593539 Observed HA/dec of plate center, fiducial point (deg) : 3.000 0.132 3.000 1.632 The rotation angle of the fid. point is -4.676569 plMakePlateFromTile : beginning loop over 1227 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9428.par makePlates : plateInfo struct for plate 1522 : (h4).mjd 52909 (h4).raCen 320.5509 (h4).decCen -0.01558691 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 320.551 -0.016 320.551 1.484 plMakePlateFromTile : mjd of obs : 52909.582867 Observed HA/dec of plate center, fiducial point (deg) : 1.000 0.011 1.000 1.510 The rotation angle of the fid. point is -1.566605 plMakePlateFromTile : beginning loop over 1245 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9429.par makePlates : plateInfo struct for plate 1523 : (h4).mjd 52909 (h4).raCen 318.6458 (h4).decCen 0.008482357 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 318.646 0.008 318.646 1.508 plMakePlateFromTile : mjd of obs : 52909.574818 Observed HA/dec of plate center, fiducial point (deg) : 0.000 0.034 0.000 1.534 The rotation angle of the fid. point is -0.013986 plMakePlateFromTile : beginning loop over 1265 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9430.par makePlates : plateInfo struct for plate 1524 : (h4).mjd 52909 (h4).raCen 316.7707 (h4).decCen -0.07187875 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 316.771 -0.072 316.771 1.428 plMakePlateFromTile : mjd of obs : 52909.644441 Observed HA/dec of plate center, fiducial point (deg) : 27.000 -0.045 27.001 1.454 The rotation angle of the fid. point is -35.174642 plMakePlateFromTile : beginning loop over 1231 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9431.par makePlates : plateInfo struct for plate 1525 : (h4).mjd 52909 (h4).raCen 314.931 (h4).decCen -0.006412425 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 314.931 -0.006 314.931 1.494 plMakePlateFromTile : mjd of obs : 52909.633802 Observed HA/dec of plate center, fiducial point (deg) : 25.000 0.020 25.001 1.519 The rotation angle of the fid. point is -33.308860 plMakePlateFromTile : beginning loop over 1181 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9432.par makePlates : plateInfo struct for plate 1526 : (h4).mjd 52909 (h4).raCen 313.4135 (h4).decCen 0.03045941 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 313.413 0.030 313.413 1.530 plMakePlateFromTile : mjd of obs : 52909.624056 Observed HA/dec of plate center, fiducial point (deg) : 23.000 0.056 23.001 1.555 The rotation angle of the fid. point is -31.303184 plMakePlateFromTile : beginning loop over 1134 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9433.par makePlates : plateInfo struct for plate 1527 : (h4).mjd 52909 (h4).raCen 311.8013 (h4).decCen 0.005181892 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 311.801 0.005 311.801 1.505 plMakePlateFromTile : mjd of obs : 52909.614047 Observed HA/dec of plate center, fiducial point (deg) : 21.000 0.030 21.001 1.530 The rotation angle of the fid. point is -29.134459 plMakePlateFromTile : beginning loop over 1050 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9434.par makePlates : plateInfo struct for plate 1528 : (h4).mjd 52909 (h4).raCen 310.1132 (h4).decCen 0.006811826 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 310.113 0.007 310.113 1.507 plMakePlateFromTile : mjd of obs : 52909.603829 Observed HA/dec of plate center, fiducial point (deg) : 19.000 0.031 19.001 1.531 The rotation angle of the fid. point is -26.857847 plMakePlateFromTile : beginning loop over 909 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapT-9435.par makePlates : plateInfo struct for plate 1529 : (h4).mjd 52909 (h4).raCen 57.4742 (h4).decCen -0.04059927 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 11 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 57.474 -0.041 57.474 1.459 plMakePlateFromTile : mjd of obs : 52909.895691 Observed HA/dec of plate center, fiducial point (deg) : 16.998 -0.016 16.997 1.484 The rotation angle of the fid. point is -24.395329 plMakePlateFromTile : beginning loop over 1363 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Aug 4 10:52:15 CDT 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_31/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_31/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 57 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1473.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 92 2 13 67 3 14 47 4 16 56 5 14 64 6 9 49 7 8 55 8 15 86 9 20 79 10 19 116 11 17 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 73 45 plFiberPlate : adding spectro-photo std with objId = 1033 1 3 68 77 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 32 98 plFiberPlate : adding spectro-photo std with objId = 1033 1 6 67 33 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 71 65 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 18 147 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 31 81 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 31 94 plFiberPlate : 82 possible sky positions to use as objects from a possible 385. plFiberPlate : 49 possible sky positions to use as objects from a possible 384. plFiberPlate : 36 possible sky positions to use as objects from a possible 383. plFiberPlate : 28 possible sky positions to use as objects from a possible 382. plFiberPlate : 19 possible sky positions to use as objects from a possible 381. plFiberPlate : 22 possible sky positions to use as objects from a possible 380. plFiberPlate : 37 possible sky positions to use as objects from a possible 379. plFiberPlate : 52 possible sky positions to use as objects from a possible 378. plFiberPlate : 44 possible sky positions to use as objects from a possible 377. plFiberPlate : 28 possible sky positions to use as objects from a possible 376. plFiberPlate : 20 possible sky positions to use as objects from a possible 375. plFiberPlate : 16 possible sky positions to use as objects from a possible 374. plFiberPlate : 15 possible sky positions to use as objects from a possible 373. plFiberPlate : 21 possible sky positions to use as objects from a possible 372. plFiberPlate : 11 possible sky positions to use as objects from a possible 371. plFiberPlate : 13 possible sky positions to use as objects from a possible 370. plFiberPlate : 33 possible sky positions to use as objects from a possible 369. plFiberPlate : 33 possible sky positions to use as objects from a possible 368. plFiberPlate : 17 possible sky positions to use as objects from a possible 367. plFiberPlate : 13 possible sky positions to use as objects from a possible 366. plFiberPlate : 6 possible sky positions to use as objects from a possible 365. plFiberPlate : 11 possible sky positions to use as objects from a possible 364. plFiberPlate : 8 possible sky positions to use as objects from a possible 363. plFiberPlate : 19 possible sky positions to use as objects from a possible 362. plFiberPlate : 15 possible sky positions to use as objects from a possible 361. plFiberPlate : 31 possible sky positions to use as objects from a possible 360. plFiberPlate : 15 possible sky positions to use as objects from a possible 359. plFiberPlate : 14 possible sky positions to use as objects from a possible 358. plFiberPlate : 8 possible sky positions to use as objects from a possible 357. plFiberPlate : 15 possible sky positions to use as objects from a possible 356. plFiberPlate : 5 possible sky positions to use as objects from a possible 355. plFiberPlate : 12 possible sky positions to use as objects from a possible 354. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1473.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1473.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1474.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 83 2 9 53 3 15 64 4 30 100 5 25 105 6 16 66 7 15 52 8 18 86 9 24 82 10 28 122 11 14 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 39 106 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 31 159 plFiberPlate : adding spectro-photo std with objId = 1033 1 4 77 6 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 30 99 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 86 116 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 31 64 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 34 130 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 39 131 plFiberPlate : 105 possible sky positions to use as objects from a possible 452. plFiberPlate : 56 possible sky positions to use as objects from a possible 451. plFiberPlate : 26 possible sky positions to use as objects from a possible 450. plFiberPlate : 16 possible sky positions to use as objects from a possible 449. plFiberPlate : 17 possible sky positions to use as objects from a possible 448. plFiberPlate : 19 possible sky positions to use as objects from a possible 447. plFiberPlate : 24 possible sky positions to use as objects from a possible 446. plFiberPlate : 69 possible sky positions to use as objects from a possible 445. plFiberPlate : 44 possible sky positions to use as objects from a possible 444. plFiberPlate : 19 possible sky positions to use as objects from a possible 443. plFiberPlate : 14 possible sky positions to use as objects from a possible 442. plFiberPlate : 5 possible sky positions to use as objects from a possible 441. plFiberPlate : 13 possible sky positions to use as objects from a possible 440. plFiberPlate : 9 possible sky positions to use as objects from a possible 439. plFiberPlate : 7 possible sky positions to use as objects from a possible 438. plFiberPlate : 22 possible sky positions to use as objects from a possible 437. plFiberPlate : 60 possible sky positions to use as objects from a possible 436. plFiberPlate : 65 possible sky positions to use as objects from a possible 435. plFiberPlate : 31 possible sky positions to use as objects from a possible 434. plFiberPlate : 13 possible sky positions to use as objects from a possible 433. plFiberPlate : 10 possible sky positions to use as objects from a possible 432. plFiberPlate : 12 possible sky positions to use as objects from a possible 431. plFiberPlate : 8 possible sky positions to use as objects from a possible 430. plFiberPlate : 18 possible sky positions to use as objects from a possible 429. plFiberPlate : 32 possible sky positions to use as objects from a possible 428. plFiberPlate : 39 possible sky positions to use as objects from a possible 427. plFiberPlate : 23 possible sky positions to use as objects from a possible 426. plFiberPlate : 20 possible sky positions to use as objects from a possible 425. plFiberPlate : 12 possible sky positions to use as objects from a possible 424. plFiberPlate : 6 possible sky positions to use as objects from a possible 423. plFiberPlate : 12 possible sky positions to use as objects from a possible 422. plFiberPlate : 12 possible sky positions to use as objects from a possible 421. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1473.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1474.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1474.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1475.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 111 2 18 64 3 17 54 4 28 73 5 19 106 6 12 55 7 21 54 8 23 94 9 19 92 10 29 117 11 26 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 91 12 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 48 146 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 55 187 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 42 55 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 53 120 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 53 80 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 43 87 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 49 68 plFiberPlate : 80 possible sky positions to use as objects from a possible 458. plFiberPlate : 52 possible sky positions to use as objects from a possible 457. plFiberPlate : 34 possible sky positions to use as objects from a possible 456. plFiberPlate : 21 possible sky positions to use as objects from a possible 455. plFiberPlate : 34 possible sky positions to use as objects from a possible 454. plFiberPlate : 29 possible sky positions to use as objects from a possible 453. plFiberPlate : 56 possible sky positions to use as objects from a possible 452. plFiberPlate : 61 possible sky positions to use as objects from a possible 451. plFiberPlate : 42 possible sky positions to use as objects from a possible 450. plFiberPlate : 25 possible sky positions to use as objects from a possible 449. plFiberPlate : 17 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : 11 possible sky positions to use as objects from a possible 446. plFiberPlate : 25 possible sky positions to use as objects from a possible 445. plFiberPlate : 27 possible sky positions to use as objects from a possible 444. plFiberPlate : 16 possible sky positions to use as objects from a possible 443. plFiberPlate : 72 possible sky positions to use as objects from a possible 442. plFiberPlate : 69 possible sky positions to use as objects from a possible 441. plFiberPlate : 28 possible sky positions to use as objects from a possible 440. plFiberPlate : 16 possible sky positions to use as objects from a possible 439. plFiberPlate : 11 possible sky positions to use as objects from a possible 438. plFiberPlate : 8 possible sky positions to use as objects from a possible 437. plFiberPlate : 24 possible sky positions to use as objects from a possible 436. plFiberPlate : 17 possible sky positions to use as objects from a possible 435. plFiberPlate : 18 possible sky positions to use as objects from a possible 434. plFiberPlate : 31 possible sky positions to use as objects from a possible 433. plFiberPlate : 25 possible sky positions to use as objects from a possible 432. plFiberPlate : 17 possible sky positions to use as objects from a possible 431. plFiberPlate : 6 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 11 possible sky positions to use as objects from a possible 428. plFiberPlate : 18 possible sky positions to use as objects from a possible 427. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1474.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1475.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1475.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1476.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 34 89 2 18 58 3 11 58 4 18 96 5 25 111 6 12 67 7 14 47 8 27 72 9 20 79 10 22 108 11 21 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 56 117 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 70 12 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 57 22 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 64 12 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 111 29 plFiberPlate : adding spectro-photo std with objId = 1033 1 1 106 58 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 68 60 plFiberPlate : adding spectro-photo std with objId = 1033 1 6 113 68 plFiberPlate : 98 possible sky positions to use as objects from a possible 446. plFiberPlate : 51 possible sky positions to use as objects from a possible 445. plFiberPlate : 27 possible sky positions to use as objects from a possible 444. plFiberPlate : 15 possible sky positions to use as objects from a possible 443. plFiberPlate : 16 possible sky positions to use as objects from a possible 442. plFiberPlate : 18 possible sky positions to use as objects from a possible 441. plFiberPlate : 43 possible sky positions to use as objects from a possible 440. plFiberPlate : 66 possible sky positions to use as objects from a possible 439. plFiberPlate : 54 possible sky positions to use as objects from a possible 438. plFiberPlate : 26 possible sky positions to use as objects from a possible 437. plFiberPlate : 18 possible sky positions to use as objects from a possible 436. plFiberPlate : 12 possible sky positions to use as objects from a possible 435. plFiberPlate : 8 possible sky positions to use as objects from a possible 434. plFiberPlate : 14 possible sky positions to use as objects from a possible 433. plFiberPlate : 31 possible sky positions to use as objects from a possible 432. plFiberPlate : 15 possible sky positions to use as objects from a possible 431. plFiberPlate : 75 possible sky positions to use as objects from a possible 430. plFiberPlate : 44 possible sky positions to use as objects from a possible 429. plFiberPlate : 22 possible sky positions to use as objects from a possible 428. plFiberPlate : 13 possible sky positions to use as objects from a possible 427. plFiberPlate : 10 possible sky positions to use as objects from a possible 426. plFiberPlate : 10 possible sky positions to use as objects from a possible 425. plFiberPlate : 11 possible sky positions to use as objects from a possible 424. plFiberPlate : 20 possible sky positions to use as objects from a possible 423. plFiberPlate : 24 possible sky positions to use as objects from a possible 422. plFiberPlate : 32 possible sky positions to use as objects from a possible 421. plFiberPlate : 25 possible sky positions to use as objects from a possible 420. plFiberPlate : 12 possible sky positions to use as objects from a possible 419. plFiberPlate : 4 possible sky positions to use as objects from a possible 418. plFiberPlate : 6 possible sky positions to use as objects from a possible 417. plFiberPlate : 5 possible sky positions to use as objects from a possible 416. plFiberPlate : 8 possible sky positions to use as objects from a possible 415. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1475.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1476.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1476.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1477.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 90 2 14 55 3 17 52 4 26 90 5 31 95 6 21 56 7 15 49 8 21 76 9 15 73 10 23 118 11 20 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 77 81 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 76 58 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 125 64 plFiberPlate : adding spectro-photo std with objId = 1033 1 6 128 95 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 79 90 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 122 34 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 68 92 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 73 70 plFiberPlate : 104 possible sky positions to use as objects from a possible 421. plFiberPlate : 63 possible sky positions to use as objects from a possible 420. plFiberPlate : 25 possible sky positions to use as objects from a possible 419. plFiberPlate : 13 possible sky positions to use as objects from a possible 418. plFiberPlate : 17 possible sky positions to use as objects from a possible 417. plFiberPlate : 25 possible sky positions to use as objects from a possible 416. plFiberPlate : 37 possible sky positions to use as objects from a possible 415. plFiberPlate : 72 possible sky positions to use as objects from a possible 414. plFiberPlate : 51 possible sky positions to use as objects from a possible 413. plFiberPlate : 30 possible sky positions to use as objects from a possible 412. plFiberPlate : 17 possible sky positions to use as objects from a possible 411. plFiberPlate : 12 possible sky positions to use as objects from a possible 410. plFiberPlate : 6 possible sky positions to use as objects from a possible 409. plFiberPlate : 15 possible sky positions to use as objects from a possible 408. plFiberPlate : 23 possible sky positions to use as objects from a possible 407. plFiberPlate : 10 possible sky positions to use as objects from a possible 406. plFiberPlate : 56 possible sky positions to use as objects from a possible 405. plFiberPlate : 41 possible sky positions to use as objects from a possible 404. plFiberPlate : 18 possible sky positions to use as objects from a possible 403. plFiberPlate : 6 possible sky positions to use as objects from a possible 402. plFiberPlate : 8 possible sky positions to use as objects from a possible 401. plFiberPlate : 6 possible sky positions to use as objects from a possible 400. plFiberPlate : 7 possible sky positions to use as objects from a possible 399. plFiberPlate : 13 possible sky positions to use as objects from a possible 398. plFiberPlate : 12 possible sky positions to use as objects from a possible 397. plFiberPlate : 31 possible sky positions to use as objects from a possible 396. plFiberPlate : 21 possible sky positions to use as objects from a possible 395. plFiberPlate : 14 possible sky positions to use as objects from a possible 394. plFiberPlate : 4 possible sky positions to use as objects from a possible 393. plFiberPlate : 12 possible sky positions to use as objects from a possible 392. plFiberPlate : 4 possible sky positions to use as objects from a possible 391. plFiberPlate : 13 possible sky positions to use as objects from a possible 390. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1476.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1477.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1477.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1478.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 103 2 10 61 3 15 53 4 33 90 5 27 107 6 15 70 7 13 68 8 22 98 9 18 96 10 26 100 11 22 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 89 75 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 83 108 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 86 103 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 88 74 plFiberPlate : adding spectro-photo std with objId = 94 4 2 22 83 plFiberPlate : adding spectro-photo std with objId = 94 4 5 22 167 plFiberPlate : adding spectro-photo std with objId = 1033 1 4 130 63 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 91 41 plFiberPlate : 96 possible sky positions to use as objects from a possible 473. plFiberPlate : 50 possible sky positions to use as objects from a possible 472. plFiberPlate : 26 possible sky positions to use as objects from a possible 471. plFiberPlate : 17 possible sky positions to use as objects from a possible 470. plFiberPlate : 10 possible sky positions to use as objects from a possible 469. plFiberPlate : 17 possible sky positions to use as objects from a possible 468. plFiberPlate : 49 possible sky positions to use as objects from a possible 467. plFiberPlate : 63 possible sky positions to use as objects from a possible 466. plFiberPlate : 43 possible sky positions to use as objects from a possible 465. plFiberPlate : 25 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : 3 possible sky positions to use as objects from a possible 462. plFiberPlate : 5 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 18 possible sky positions to use as objects from a possible 459. plFiberPlate : 28 possible sky positions to use as objects from a possible 458. plFiberPlate : 70 possible sky positions to use as objects from a possible 457. plFiberPlate : 38 possible sky positions to use as objects from a possible 456. plFiberPlate : 20 possible sky positions to use as objects from a possible 455. plFiberPlate : 12 possible sky positions to use as objects from a possible 454. plFiberPlate : 11 possible sky positions to use as objects from a possible 453. plFiberPlate : 11 possible sky positions to use as objects from a possible 452. plFiberPlate : 20 possible sky positions to use as objects from a possible 451. plFiberPlate : 10 possible sky positions to use as objects from a possible 450. plFiberPlate : 21 possible sky positions to use as objects from a possible 449. plFiberPlate : 42 possible sky positions to use as objects from a possible 448. plFiberPlate : 20 possible sky positions to use as objects from a possible 447. plFiberPlate : 15 possible sky positions to use as objects from a possible 446. plFiberPlate : 9 possible sky positions to use as objects from a possible 445. plFiberPlate : 10 possible sky positions to use as objects from a possible 444. plFiberPlate : 5 possible sky positions to use as objects from a possible 443. plFiberPlate : 16 possible sky positions to use as objects from a possible 442. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1477.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1478.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1478.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1479.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 98 2 20 59 3 16 66 4 28 94 5 33 97 6 18 63 7 19 70 8 38 103 9 22 90 10 26 125 11 25 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 25 63 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 99 78 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 102 64 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 106 49 plFiberPlate : adding spectro-photo std with objId = 94 4 2 23 52 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 101 107 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 109 72 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 96 89 plFiberPlate : 106 possible sky positions to use as objects from a possible 469. plFiberPlate : 64 possible sky positions to use as objects from a possible 468. plFiberPlate : 16 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 18 possible sky positions to use as objects from a possible 465. plFiberPlate : 24 possible sky positions to use as objects from a possible 464. plFiberPlate : 41 possible sky positions to use as objects from a possible 463. plFiberPlate : 69 possible sky positions to use as objects from a possible 462. plFiberPlate : 49 possible sky positions to use as objects from a possible 461. plFiberPlate : 23 possible sky positions to use as objects from a possible 460. plFiberPlate : 11 possible sky positions to use as objects from a possible 459. plFiberPlate : 7 possible sky positions to use as objects from a possible 458. plFiberPlate : 8 possible sky positions to use as objects from a possible 457. plFiberPlate : 12 possible sky positions to use as objects from a possible 456. plFiberPlate : 16 possible sky positions to use as objects from a possible 455. plFiberPlate : 14 possible sky positions to use as objects from a possible 454. plFiberPlate : 66 possible sky positions to use as objects from a possible 453. plFiberPlate : 50 possible sky positions to use as objects from a possible 452. plFiberPlate : 30 possible sky positions to use as objects from a possible 451. plFiberPlate : 15 possible sky positions to use as objects from a possible 450. plFiberPlate : 3 possible sky positions to use as objects from a possible 449. plFiberPlate : 11 possible sky positions to use as objects from a possible 448. plFiberPlate : 9 possible sky positions to use as objects from a possible 447. plFiberPlate : 17 possible sky positions to use as objects from a possible 446. plFiberPlate : 30 possible sky positions to use as objects from a possible 445. plFiberPlate : 32 possible sky positions to use as objects from a possible 444. plFiberPlate : 18 possible sky positions to use as objects from a possible 443. plFiberPlate : 13 possible sky positions to use as objects from a possible 442. plFiberPlate : 7 possible sky positions to use as objects from a possible 441. plFiberPlate : 9 possible sky positions to use as objects from a possible 440. plFiberPlate : 16 possible sky positions to use as objects from a possible 439. plFiberPlate : 14 possible sky positions to use as objects from a possible 438. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1478.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1479.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1479.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1480.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 99 2 17 58 3 20 56 4 29 98 5 23 97 6 11 56 7 11 69 8 17 97 9 10 80 10 28 121 11 17 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 111 41 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 121 72 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 121 54 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 107 85 plFiberPlate : adding spectro-photo std with objId = 94 4 4 41 32 plFiberPlate : adding spectro-photo std with objId = 94 4 3 39 22 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 111 117 plFiberPlate : adding spectro-photo std with objId = 94 4 2 51 59 plFiberPlate : 105 possible sky positions to use as objects from a possible 465. plFiberPlate : 66 possible sky positions to use as objects from a possible 464. plFiberPlate : 35 possible sky positions to use as objects from a possible 463. plFiberPlate : 16 possible sky positions to use as objects from a possible 462. plFiberPlate : 22 possible sky positions to use as objects from a possible 461. plFiberPlate : 24 possible sky positions to use as objects from a possible 460. plFiberPlate : 36 possible sky positions to use as objects from a possible 459. plFiberPlate : 73 possible sky positions to use as objects from a possible 458. plFiberPlate : 46 possible sky positions to use as objects from a possible 457. plFiberPlate : 27 possible sky positions to use as objects from a possible 456. plFiberPlate : 17 possible sky positions to use as objects from a possible 455. plFiberPlate : 5 possible sky positions to use as objects from a possible 454. plFiberPlate : 6 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 20 possible sky positions to use as objects from a possible 451. plFiberPlate : 20 possible sky positions to use as objects from a possible 450. plFiberPlate : 55 possible sky positions to use as objects from a possible 449. plFiberPlate : 42 possible sky positions to use as objects from a possible 448. plFiberPlate : 19 possible sky positions to use as objects from a possible 447. plFiberPlate : 9 possible sky positions to use as objects from a possible 446. plFiberPlate : 7 possible sky positions to use as objects from a possible 445. plFiberPlate : 1 possible sky positions to use as objects from a possible 444. plFiberPlate : 6 possible sky positions to use as objects from a possible 443. plFiberPlate : 23 possible sky positions to use as objects from a possible 442. plFiberPlate : 24 possible sky positions to use as objects from a possible 441. plFiberPlate : 24 possible sky positions to use as objects from a possible 440. plFiberPlate : 9 possible sky positions to use as objects from a possible 439. plFiberPlate : 13 possible sky positions to use as objects from a possible 438. plFiberPlate : 10 possible sky positions to use as objects from a possible 437. plFiberPlate : 13 possible sky positions to use as objects from a possible 436. plFiberPlate : 7 possible sky positions to use as objects from a possible 435. plFiberPlate : 11 possible sky positions to use as objects from a possible 434. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1479.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1480.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1480.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1481.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 112 2 12 67 3 13 70 4 22 95 5 19 106 6 12 50 7 13 60 8 27 99 9 17 76 10 21 121 11 16 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 121 46 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 122 66 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 123 72 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 122 55 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 135 47 plFiberPlate : adding spectro-photo std with objId = 94 4 1 53 49 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 130 56 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 130 44 plFiberPlate : 101 possible sky positions to use as objects from a possible 476. plFiberPlate : 58 possible sky positions to use as objects from a possible 475. plFiberPlate : 33 possible sky positions to use as objects from a possible 474. plFiberPlate : 18 possible sky positions to use as objects from a possible 473. plFiberPlate : 25 possible sky positions to use as objects from a possible 472. plFiberPlate : 18 possible sky positions to use as objects from a possible 471. plFiberPlate : 50 possible sky positions to use as objects from a possible 470. plFiberPlate : 69 possible sky positions to use as objects from a possible 469. plFiberPlate : 57 possible sky positions to use as objects from a possible 468. plFiberPlate : 28 possible sky positions to use as objects from a possible 467. plFiberPlate : 11 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : 11 possible sky positions to use as objects from a possible 463. plFiberPlate : 25 possible sky positions to use as objects from a possible 462. plFiberPlate : 23 possible sky positions to use as objects from a possible 461. plFiberPlate : 49 possible sky positions to use as objects from a possible 460. plFiberPlate : 25 possible sky positions to use as objects from a possible 459. plFiberPlate : 15 possible sky positions to use as objects from a possible 458. plFiberPlate : 5 possible sky positions to use as objects from a possible 457. plFiberPlate : 3 possible sky positions to use as objects from a possible 456. plFiberPlate : 6 possible sky positions to use as objects from a possible 455. plFiberPlate : 9 possible sky positions to use as objects from a possible 454. plFiberPlate : 11 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 34 possible sky positions to use as objects from a possible 451. plFiberPlate : 25 possible sky positions to use as objects from a possible 450. plFiberPlate : 13 possible sky positions to use as objects from a possible 449. plFiberPlate : 9 possible sky positions to use as objects from a possible 448. plFiberPlate : 9 possible sky positions to use as objects from a possible 447. plFiberPlate : 10 possible sky positions to use as objects from a possible 446. plFiberPlate : 11 possible sky positions to use as objects from a possible 445. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1480.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1481.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1481.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1482.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 100 2 21 59 3 17 60 4 24 98 5 27 101 6 12 55 7 14 60 8 20 103 9 21 90 10 32 129 11 34 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 5 72 25 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 143 114 plFiberPlate : adding spectro-photo std with objId = 94 4 6 69 13 plFiberPlate : adding spectro-photo std with objId = 94 4 6 68 102 plFiberPlate : adding spectro-photo std with objId = 94 4 1 63 22 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 134 63 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 138 69 plFiberPlate : adding spectro-photo std with objId = 94 4 2 69 113 plFiberPlate : 91 possible sky positions to use as objects from a possible 475. plFiberPlate : 72 possible sky positions to use as objects from a possible 474. plFiberPlate : 47 possible sky positions to use as objects from a possible 473. plFiberPlate : 22 possible sky positions to use as objects from a possible 472. plFiberPlate : 28 possible sky positions to use as objects from a possible 471. plFiberPlate : 28 possible sky positions to use as objects from a possible 470. plFiberPlate : 32 possible sky positions to use as objects from a possible 469. plFiberPlate : 77 possible sky positions to use as objects from a possible 468. plFiberPlate : 56 possible sky positions to use as objects from a possible 467. plFiberPlate : 40 possible sky positions to use as objects from a possible 466. plFiberPlate : 22 possible sky positions to use as objects from a possible 465. plFiberPlate : 15 possible sky positions to use as objects from a possible 464. plFiberPlate : 16 possible sky positions to use as objects from a possible 463. plFiberPlate : 22 possible sky positions to use as objects from a possible 462. plFiberPlate : 16 possible sky positions to use as objects from a possible 461. plFiberPlate : 15 possible sky positions to use as objects from a possible 460. plFiberPlate : 55 possible sky positions to use as objects from a possible 459. plFiberPlate : 34 possible sky positions to use as objects from a possible 458. plFiberPlate : 18 possible sky positions to use as objects from a possible 457. plFiberPlate : 4 possible sky positions to use as objects from a possible 456. plFiberPlate : 7 possible sky positions to use as objects from a possible 455. plFiberPlate : 3 possible sky positions to use as objects from a possible 454. plFiberPlate : 14 possible sky positions to use as objects from a possible 453. plFiberPlate : 13 possible sky positions to use as objects from a possible 452. plFiberPlate : 18 possible sky positions to use as objects from a possible 451. plFiberPlate : 30 possible sky positions to use as objects from a possible 450. plFiberPlate : 23 possible sky positions to use as objects from a possible 449. plFiberPlate : 14 possible sky positions to use as objects from a possible 448. plFiberPlate : 7 possible sky positions to use as objects from a possible 447. plFiberPlate : 12 possible sky positions to use as objects from a possible 446. plFiberPlate : 9 possible sky positions to use as objects from a possible 445. plFiberPlate : 16 possible sky positions to use as objects from a possible 444. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1481.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1482.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1482.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1483.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 103 2 13 64 3 15 49 4 22 86 5 17 110 6 12 68 7 15 66 8 22 103 9 27 91 10 24 121 11 19 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 148 75 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 156 29 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 146 16 plFiberPlate : adding spectro-photo std with objId = 94 4 2 91 6 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 155 68 plFiberPlate : adding spectro-photo std with objId = 94 4 1 78 29 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 162 56 plFiberPlate : adding spectro-photo std with objId = 94 4 4 77 25 plFiberPlate : 82 possible sky positions to use as objects from a possible 480. plFiberPlate : 53 possible sky positions to use as objects from a possible 479. plFiberPlate : 31 possible sky positions to use as objects from a possible 478. plFiberPlate : 19 possible sky positions to use as objects from a possible 477. plFiberPlate : 30 possible sky positions to use as objects from a possible 476. plFiberPlate : 23 possible sky positions to use as objects from a possible 475. plFiberPlate : 52 possible sky positions to use as objects from a possible 474. plFiberPlate : 70 possible sky positions to use as objects from a possible 473. plFiberPlate : 59 possible sky positions to use as objects from a possible 472. plFiberPlate : 31 possible sky positions to use as objects from a possible 471. plFiberPlate : 14 possible sky positions to use as objects from a possible 470. plFiberPlate : 4 possible sky positions to use as objects from a possible 469. plFiberPlate : 15 possible sky positions to use as objects from a possible 468. plFiberPlate : 14 possible sky positions to use as objects from a possible 467. plFiberPlate : 15 possible sky positions to use as objects from a possible 466. plFiberPlate : 15 possible sky positions to use as objects from a possible 465. plFiberPlate : 66 possible sky positions to use as objects from a possible 464. plFiberPlate : 40 possible sky positions to use as objects from a possible 463. plFiberPlate : 28 possible sky positions to use as objects from a possible 462. plFiberPlate : 8 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 12 possible sky positions to use as objects from a possible 458. plFiberPlate : 17 possible sky positions to use as objects from a possible 457. plFiberPlate : 12 possible sky positions to use as objects from a possible 456. plFiberPlate : 28 possible sky positions to use as objects from a possible 455. plFiberPlate : 21 possible sky positions to use as objects from a possible 454. plFiberPlate : 8 possible sky positions to use as objects from a possible 453. plFiberPlate : 4 possible sky positions to use as objects from a possible 452. plFiberPlate : 15 possible sky positions to use as objects from a possible 451. plFiberPlate : 12 possible sky positions to use as objects from a possible 450. plFiberPlate : 17 possible sky positions to use as objects from a possible 449. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1482.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1483.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1483.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1484.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 97 2 13 66 3 19 73 4 24 105 5 26 101 6 19 55 7 8 62 8 19 104 9 17 92 10 30 132 11 18 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 170 73 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 168 38 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 175 63 plFiberPlate : adding spectro-photo std with objId = 94 4 5 96 22 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 163 25 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 163 45 plFiberPlate : adding spectro-photo std with objId = 94 4 3 88 77 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 163 87 plFiberPlate : 111 possible sky positions to use as objects from a possible 497. plFiberPlate : 84 possible sky positions to use as objects from a possible 496. plFiberPlate : 34 possible sky positions to use as objects from a possible 495. plFiberPlate : 22 possible sky positions to use as objects from a possible 494. plFiberPlate : 26 possible sky positions to use as objects from a possible 493. plFiberPlate : 26 possible sky positions to use as objects from a possible 492. plFiberPlate : 33 possible sky positions to use as objects from a possible 491. plFiberPlate : 78 possible sky positions to use as objects from a possible 490. plFiberPlate : 40 possible sky positions to use as objects from a possible 489. plFiberPlate : 46 possible sky positions to use as objects from a possible 488. plFiberPlate : 25 possible sky positions to use as objects from a possible 487. plFiberPlate : 19 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 10 possible sky positions to use as objects from a possible 484. plFiberPlate : 16 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 60 possible sky positions to use as objects from a possible 481. plFiberPlate : 46 possible sky positions to use as objects from a possible 480. plFiberPlate : 36 possible sky positions to use as objects from a possible 479. plFiberPlate : 28 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 7 possible sky positions to use as objects from a possible 476. plFiberPlate : 13 possible sky positions to use as objects from a possible 475. plFiberPlate : 22 possible sky positions to use as objects from a possible 474. plFiberPlate : 23 possible sky positions to use as objects from a possible 473. plFiberPlate : 34 possible sky positions to use as objects from a possible 472. plFiberPlate : 14 possible sky positions to use as objects from a possible 471. plFiberPlate : 10 possible sky positions to use as objects from a possible 470. plFiberPlate : 7 possible sky positions to use as objects from a possible 469. plFiberPlate : 5 possible sky positions to use as objects from a possible 468. plFiberPlate : 7 possible sky positions to use as objects from a possible 467. plFiberPlate : 22 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1483.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1484.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1484.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1485.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 118 2 15 81 3 18 74 4 22 105 5 24 110 6 15 51 7 13 60 8 13 109 9 20 87 10 25 125 11 17 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 5 113 8 plFiberPlate : adding spectro-photo std with objId = 94 4 1 102 72 plFiberPlate : adding spectro-photo std with objId = 125 4 6 17 2 plFiberPlate : adding spectro-photo std with objId = 125 4 4 20 55 plFiberPlate : adding spectro-photo std with objId = 94 4 1 113 16 plFiberPlate : adding spectro-photo std with objId = 94 4 3 114 10 plFiberPlate : adding spectro-photo std with objId = 94 4 2 116 65 plFiberPlate : adding spectro-photo std with objId = 125 4 5 17 73 plFiberPlate : 108 possible sky positions to use as objects from a possible 512. plFiberPlate : 67 possible sky positions to use as objects from a possible 511. plFiberPlate : 34 possible sky positions to use as objects from a possible 510. plFiberPlate : 23 possible sky positions to use as objects from a possible 509. plFiberPlate : 25 possible sky positions to use as objects from a possible 508. plFiberPlate : 29 possible sky positions to use as objects from a possible 507. plFiberPlate : 62 possible sky positions to use as objects from a possible 506. plFiberPlate : 68 possible sky positions to use as objects from a possible 505. plFiberPlate : 59 possible sky positions to use as objects from a possible 504. plFiberPlate : 34 possible sky positions to use as objects from a possible 503. plFiberPlate : 12 possible sky positions to use as objects from a possible 502. plFiberPlate : 9 possible sky positions to use as objects from a possible 501. plFiberPlate : 5 possible sky positions to use as objects from a possible 500. plFiberPlate : 19 possible sky positions to use as objects from a possible 499. plFiberPlate : 23 possible sky positions to use as objects from a possible 498. plFiberPlate : 19 possible sky positions to use as objects from a possible 497. plFiberPlate : 65 possible sky positions to use as objects from a possible 496. plFiberPlate : 48 possible sky positions to use as objects from a possible 495. plFiberPlate : 32 possible sky positions to use as objects from a possible 494. plFiberPlate : 14 possible sky positions to use as objects from a possible 493. plFiberPlate : 4 possible sky positions to use as objects from a possible 492. plFiberPlate : 3 possible sky positions to use as objects from a possible 491. plFiberPlate : 23 possible sky positions to use as objects from a possible 490. plFiberPlate : 24 possible sky positions to use as objects from a possible 489. plFiberPlate : 16 possible sky positions to use as objects from a possible 488. plFiberPlate : 45 possible sky positions to use as objects from a possible 487. plFiberPlate : 21 possible sky positions to use as objects from a possible 486. plFiberPlate : 12 possible sky positions to use as objects from a possible 485. plFiberPlate : 5 possible sky positions to use as objects from a possible 484. plFiberPlate : 9 possible sky positions to use as objects from a possible 483. plFiberPlate : 12 possible sky positions to use as objects from a possible 482. plFiberPlate : 13 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1484.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1485.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1485.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1486.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 101 2 13 53 3 9 63 4 20 112 5 22 127 6 16 81 7 16 78 8 22 106 9 24 100 10 27 125 11 18 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 117 18 plFiberPlate : adding spectro-photo std with objId = 125 4 2 28 70 plFiberPlate : adding spectro-photo std with objId = 94 4 6 118 64 plFiberPlate : adding spectro-photo std with objId = 125 4 6 36 66 plFiberPlate : adding spectro-photo std with objId = 94 4 4 126 16 plFiberPlate : adding spectro-photo std with objId = 125 4 3 25 46 plFiberPlate : adding spectro-photo std with objId = 125 4 3 25 6 plFiberPlate : adding spectro-photo std with objId = 94 4 4 132 2 plFiberPlate : 110 possible sky positions to use as objects from a possible 539. plFiberPlate : 62 possible sky positions to use as objects from a possible 538. plFiberPlate : 28 possible sky positions to use as objects from a possible 537. plFiberPlate : 21 possible sky positions to use as objects from a possible 536. plFiberPlate : 20 possible sky positions to use as objects from a possible 535. plFiberPlate : 26 possible sky positions to use as objects from a possible 534. plFiberPlate : 40 possible sky positions to use as objects from a possible 533. plFiberPlate : 87 possible sky positions to use as objects from a possible 532. plFiberPlate : 39 possible sky positions to use as objects from a possible 531. plFiberPlate : 27 possible sky positions to use as objects from a possible 530. plFiberPlate : 17 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : 6 possible sky positions to use as objects from a possible 526. plFiberPlate : 27 possible sky positions to use as objects from a possible 525. plFiberPlate : 16 possible sky positions to use as objects from a possible 524. plFiberPlate : 90 possible sky positions to use as objects from a possible 523. plFiberPlate : 49 possible sky positions to use as objects from a possible 522. plFiberPlate : 30 possible sky positions to use as objects from a possible 521. plFiberPlate : 20 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 26 possible sky positions to use as objects from a possible 516. plFiberPlate : 21 possible sky positions to use as objects from a possible 515. plFiberPlate : 42 possible sky positions to use as objects from a possible 514. plFiberPlate : 19 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : 7 possible sky positions to use as objects from a possible 511. plFiberPlate : 8 possible sky positions to use as objects from a possible 510. plFiberPlate : 10 possible sky positions to use as objects from a possible 509. plFiberPlate : 22 possible sky positions to use as objects from a possible 508. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1485.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1486.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1486.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1487.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 110 2 11 78 3 12 84 4 23 101 5 25 107 6 18 71 7 11 75 8 21 94 9 22 97 10 19 142 11 15 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 44 11 plFiberPlate : adding spectro-photo std with objId = 94 4 1 131 19 plFiberPlate : adding spectro-photo std with objId = 125 4 6 36 60 plFiberPlate : adding spectro-photo std with objId = 125 4 4 42 58 plFiberPlate : adding spectro-photo std with objId = 94 4 2 145 2 plFiberPlate : adding spectro-photo std with objId = 125 4 4 50 14 plFiberPlate : adding spectro-photo std with objId = 125 4 6 36 66 plFiberPlate : adding spectro-photo std with objId = 94 4 3 143 47 plFiberPlate : 121 possible sky positions to use as objects from a possible 512. plFiberPlate : 80 possible sky positions to use as objects from a possible 511. plFiberPlate : 44 possible sky positions to use as objects from a possible 510. plFiberPlate : 33 possible sky positions to use as objects from a possible 509. plFiberPlate : 31 possible sky positions to use as objects from a possible 508. plFiberPlate : 26 possible sky positions to use as objects from a possible 507. plFiberPlate : 27 possible sky positions to use as objects from a possible 506. plFiberPlate : 73 possible sky positions to use as objects from a possible 505. plFiberPlate : 43 possible sky positions to use as objects from a possible 504. plFiberPlate : 28 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 11 possible sky positions to use as objects from a possible 501. plFiberPlate : 13 possible sky positions to use as objects from a possible 500. plFiberPlate : 8 possible sky positions to use as objects from a possible 499. plFiberPlate : 19 possible sky positions to use as objects from a possible 498. plFiberPlate : 21 possible sky positions to use as objects from a possible 497. plFiberPlate : 63 possible sky positions to use as objects from a possible 496. plFiberPlate : 39 possible sky positions to use as objects from a possible 495. plFiberPlate : 22 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 5 possible sky positions to use as objects from a possible 492. plFiberPlate : 6 possible sky positions to use as objects from a possible 491. plFiberPlate : 5 possible sky positions to use as objects from a possible 490. plFiberPlate : 8 possible sky positions to use as objects from a possible 489. plFiberPlate : 21 possible sky positions to use as objects from a possible 488. plFiberPlate : 47 possible sky positions to use as objects from a possible 487. plFiberPlate : 30 possible sky positions to use as objects from a possible 486. plFiberPlate : 23 possible sky positions to use as objects from a possible 485. plFiberPlate : 19 possible sky positions to use as objects from a possible 484. plFiberPlate : 18 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 16 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1486.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1487.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1487.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1488.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 114 2 12 81 3 13 74 4 14 115 5 19 103 6 9 66 7 8 65 8 17 91 9 15 96 10 24 147 11 18 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 6 51 62 plFiberPlate : adding spectro-photo std with objId = 125 4 2 52 59 plFiberPlate : adding spectro-photo std with objId = 125 4 1 63 62 plFiberPlate : adding spectro-photo std with objId = 125 4 4 57 78 plFiberPlate : adding spectro-photo std with objId = 125 4 3 54 2 plFiberPlate : adding spectro-photo std with objId = 94 4 2 147 33 plFiberPlate : adding spectro-photo std with objId = 125 4 6 60 61 plFiberPlate : adding spectro-photo std with objId = 125 4 4 50 14 plFiberPlate : 101 possible sky positions to use as objects from a possible 522. plFiberPlate : 73 possible sky positions to use as objects from a possible 521. plFiberPlate : 29 possible sky positions to use as objects from a possible 520. plFiberPlate : 32 possible sky positions to use as objects from a possible 519. plFiberPlate : 23 possible sky positions to use as objects from a possible 518. plFiberPlate : 17 possible sky positions to use as objects from a possible 517. plFiberPlate : 35 possible sky positions to use as objects from a possible 516. plFiberPlate : 79 possible sky positions to use as objects from a possible 515. plFiberPlate : 62 possible sky positions to use as objects from a possible 514. plFiberPlate : 45 possible sky positions to use as objects from a possible 513. plFiberPlate : 28 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 12 possible sky positions to use as objects from a possible 510. plFiberPlate : 20 possible sky positions to use as objects from a possible 509. plFiberPlate : 16 possible sky positions to use as objects from a possible 508. plFiberPlate : 21 possible sky positions to use as objects from a possible 507. plFiberPlate : 74 possible sky positions to use as objects from a possible 506. plFiberPlate : 56 possible sky positions to use as objects from a possible 505. plFiberPlate : 38 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 3 possible sky positions to use as objects from a possible 502. plFiberPlate : 10 possible sky positions to use as objects from a possible 501. plFiberPlate : 14 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 31 possible sky positions to use as objects from a possible 498. plFiberPlate : 34 possible sky positions to use as objects from a possible 497. plFiberPlate : 25 possible sky positions to use as objects from a possible 496. plFiberPlate : 16 possible sky positions to use as objects from a possible 495. plFiberPlate : 6 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 7 possible sky positions to use as objects from a possible 492. plFiberPlate : 9 possible sky positions to use as objects from a possible 491. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1487.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1488.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1488.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1489.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 110 2 11 71 3 14 65 4 24 100 5 20 127 6 14 70 7 15 53 8 19 80 9 23 84 10 24 128 11 15 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 1 68 44 plFiberPlate : adding spectro-photo std with objId = 125 4 2 69 93 plFiberPlate : adding spectro-photo std with objId = 125 4 4 79 2 plFiberPlate : adding spectro-photo std with objId = 125 4 4 81 63 plFiberPlate : adding spectro-photo std with objId = 125 4 6 69 36 plFiberPlate : adding spectro-photo std with objId = 94 4 2 165 70 plFiberPlate : adding spectro-photo std with objId = 125 4 6 68 64 plFiberPlate : adding spectro-photo std with objId = 94 4 2 164 8 plFiberPlate : 108 possible sky positions to use as objects from a possible 501. plFiberPlate : 58 possible sky positions to use as objects from a possible 500. plFiberPlate : 41 possible sky positions to use as objects from a possible 499. plFiberPlate : 25 possible sky positions to use as objects from a possible 498. plFiberPlate : 39 possible sky positions to use as objects from a possible 497. plFiberPlate : 19 possible sky positions to use as objects from a possible 496. plFiberPlate : 42 possible sky positions to use as objects from a possible 495. plFiberPlate : 83 possible sky positions to use as objects from a possible 494. plFiberPlate : 49 possible sky positions to use as objects from a possible 493. plFiberPlate : 28 possible sky positions to use as objects from a possible 492. plFiberPlate : 16 possible sky positions to use as objects from a possible 491. plFiberPlate : 23 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 16 possible sky positions to use as objects from a possible 488. plFiberPlate : 20 possible sky positions to use as objects from a possible 487. plFiberPlate : 23 possible sky positions to use as objects from a possible 486. plFiberPlate : 87 possible sky positions to use as objects from a possible 485. plFiberPlate : 63 possible sky positions to use as objects from a possible 484. plFiberPlate : 37 possible sky positions to use as objects from a possible 483. plFiberPlate : 15 possible sky positions to use as objects from a possible 482. plFiberPlate : 10 possible sky positions to use as objects from a possible 481. plFiberPlate : 11 possible sky positions to use as objects from a possible 480. plFiberPlate : 18 possible sky positions to use as objects from a possible 479. plFiberPlate : 16 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 34 possible sky positions to use as objects from a possible 476. plFiberPlate : 25 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 9 possible sky positions to use as objects from a possible 473. plFiberPlate : 8 possible sky positions to use as objects from a possible 472. plFiberPlate : 4 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1488.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1489.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1489.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1490.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 114 2 12 54 3 14 65 4 26 116 5 26 116 6 10 65 7 8 71 8 17 95 9 12 89 10 25 128 11 19 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 83 2 plFiberPlate : adding spectro-photo std with objId = 125 4 5 94 61 plFiberPlate : adding spectro-photo std with objId = 125 4 3 80 46 plFiberPlate : adding spectro-photo std with objId = 125 4 5 89 67 plFiberPlate : adding spectro-photo std with objId = 94 4 5 182 48 plFiberPlate : adding spectro-photo std with objId = 125 4 2 94 88 plFiberPlate : adding spectro-photo std with objId = 125 4 6 88 30 plFiberPlate : adding spectro-photo std with objId = 94 4 3 182 46 plFiberPlate : 120 possible sky positions to use as objects from a possible 518. plFiberPlate : 72 possible sky positions to use as objects from a possible 517. plFiberPlate : 48 possible sky positions to use as objects from a possible 516. plFiberPlate : 14 possible sky positions to use as objects from a possible 515. plFiberPlate : 20 possible sky positions to use as objects from a possible 514. plFiberPlate : 27 possible sky positions to use as objects from a possible 513. plFiberPlate : 46 possible sky positions to use as objects from a possible 512. plFiberPlate : 89 possible sky positions to use as objects from a possible 511. plFiberPlate : 55 possible sky positions to use as objects from a possible 510. plFiberPlate : 30 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 15 possible sky positions to use as objects from a possible 506. plFiberPlate : 16 possible sky positions to use as objects from a possible 505. plFiberPlate : 16 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 72 possible sky positions to use as objects from a possible 502. plFiberPlate : 47 possible sky positions to use as objects from a possible 501. plFiberPlate : 25 possible sky positions to use as objects from a possible 500. plFiberPlate : 19 possible sky positions to use as objects from a possible 499. plFiberPlate : 3 possible sky positions to use as objects from a possible 498. plFiberPlate : 11 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 36 possible sky positions to use as objects from a possible 493. plFiberPlate : 29 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 14 possible sky positions to use as objects from a possible 490. plFiberPlate : 5 possible sky positions to use as objects from a possible 489. plFiberPlate : 3 possible sky positions to use as objects from a possible 488. plFiberPlate : 27 possible sky positions to use as objects from a possible 487. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1489.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1490.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1490.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1491.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 98 2 12 72 3 15 60 4 27 110 5 26 127 6 11 81 7 15 71 8 18 94 9 13 89 10 22 125 11 20 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 6 101 40 plFiberPlate : adding spectro-photo std with objId = 125 4 6 91 2 plFiberPlate : adding spectro-photo std with objId = 125 4 2 99 206 plFiberPlate : adding spectro-photo std with objId = 125 4 2 94 88 plFiberPlate : adding spectro-photo std with objId = 94 4 4 184 38 plFiberPlate : adding spectro-photo std with objId = 94 4 2 193 83 plFiberPlate : adding spectro-photo std with objId = 125 4 3 91 27 plFiberPlate : adding spectro-photo std with objId = 125 4 4 98 82 plFiberPlate : 106 possible sky positions to use as objects from a possible 506. plFiberPlate : 64 possible sky positions to use as objects from a possible 505. plFiberPlate : 33 possible sky positions to use as objects from a possible 504. plFiberPlate : 23 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 22 possible sky positions to use as objects from a possible 501. plFiberPlate : 44 possible sky positions to use as objects from a possible 500. plFiberPlate : 85 possible sky positions to use as objects from a possible 499. plFiberPlate : 62 possible sky positions to use as objects from a possible 498. plFiberPlate : 41 possible sky positions to use as objects from a possible 497. plFiberPlate : 20 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 3 possible sky positions to use as objects from a possible 494. plFiberPlate : 14 possible sky positions to use as objects from a possible 493. plFiberPlate : 21 possible sky positions to use as objects from a possible 492. plFiberPlate : 19 possible sky positions to use as objects from a possible 491. plFiberPlate : 68 possible sky positions to use as objects from a possible 490. plFiberPlate : 40 possible sky positions to use as objects from a possible 489. plFiberPlate : 35 possible sky positions to use as objects from a possible 488. plFiberPlate : 15 possible sky positions to use as objects from a possible 487. plFiberPlate : 8 possible sky positions to use as objects from a possible 486. plFiberPlate : 4 possible sky positions to use as objects from a possible 485. plFiberPlate : 13 possible sky positions to use as objects from a possible 484. plFiberPlate : 25 possible sky positions to use as objects from a possible 483. plFiberPlate : 18 possible sky positions to use as objects from a possible 482. plFiberPlate : 47 possible sky positions to use as objects from a possible 481. plFiberPlate : 28 possible sky positions to use as objects from a possible 480. plFiberPlate : 15 possible sky positions to use as objects from a possible 479. plFiberPlate : 10 possible sky positions to use as objects from a possible 478. plFiberPlate : 5 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 14 possible sky positions to use as objects from a possible 475. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1490.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1491.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1491.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1492.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 108 2 11 53 3 18 64 4 28 104 5 21 123 6 16 74 7 11 70 8 11 100 9 18 99 10 20 131 11 14 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 198 26 plFiberPlate : adding spectro-photo std with objId = 125 4 3 112 35 plFiberPlate : adding spectro-photo std with objId = 94 4 2 195 55 plFiberPlate : adding spectro-photo std with objId = 125 4 5 115 6 plFiberPlate : adding spectro-photo std with objId = 125 4 5 110 62 plFiberPlate : adding spectro-photo std with objId = 94 4 5 202 8 plFiberPlate : adding spectro-photo std with objId = 125 4 6 113 87 plFiberPlate : adding spectro-photo std with objId = 94 4 5 200 6 plFiberPlate : 110 possible sky positions to use as objects from a possible 521. plFiberPlate : 57 possible sky positions to use as objects from a possible 520. plFiberPlate : 21 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 20 possible sky positions to use as objects from a possible 517. plFiberPlate : 38 possible sky positions to use as objects from a possible 516. plFiberPlate : 26 possible sky positions to use as objects from a possible 515. plFiberPlate : 85 possible sky positions to use as objects from a possible 514. plFiberPlate : 65 possible sky positions to use as objects from a possible 513. plFiberPlate : 43 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 5 possible sky positions to use as objects from a possible 510. plFiberPlate : 10 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : 17 possible sky positions to use as objects from a possible 507. plFiberPlate : 30 possible sky positions to use as objects from a possible 506. plFiberPlate : 88 possible sky positions to use as objects from a possible 505. plFiberPlate : 62 possible sky positions to use as objects from a possible 504. plFiberPlate : 37 possible sky positions to use as objects from a possible 503. plFiberPlate : 16 possible sky positions to use as objects from a possible 502. plFiberPlate : 11 possible sky positions to use as objects from a possible 501. plFiberPlate : 17 possible sky positions to use as objects from a possible 500. plFiberPlate : 18 possible sky positions to use as objects from a possible 499. plFiberPlate : 21 possible sky positions to use as objects from a possible 498. plFiberPlate : 23 possible sky positions to use as objects from a possible 497. plFiberPlate : 47 possible sky positions to use as objects from a possible 496. plFiberPlate : 24 possible sky positions to use as objects from a possible 495. plFiberPlate : 13 possible sky positions to use as objects from a possible 494. plFiberPlate : 11 possible sky positions to use as objects from a possible 493. plFiberPlate : 13 possible sky positions to use as objects from a possible 492. plFiberPlate : 6 possible sky positions to use as objects from a possible 491. plFiberPlate : 17 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1491.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1492.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1492.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1493.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 114 2 7 89 3 9 77 4 16 109 5 14 122 6 6 68 7 13 68 8 22 107 9 17 88 10 19 141 11 15 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 120 8 plFiberPlate : adding spectro-photo std with objId = 125 4 2 115 44 plFiberPlate : adding spectro-photo std with objId = 125 4 6 117 43 plFiberPlate : adding spectro-photo std with objId = 125 4 6 126 73 plFiberPlate : adding spectro-photo std with objId = 125 4 3 123 47 plFiberPlate : adding spectro-photo std with objId = 125 4 3 119 30 plFiberPlate : adding spectro-photo std with objId = 125 4 5 127 52 plFiberPlate : adding spectro-photo std with objId = 125 4 4 121 73 plFiberPlate : 115 possible sky positions to use as objects from a possible 533. plFiberPlate : 62 possible sky positions to use as objects from a possible 532. plFiberPlate : 31 possible sky positions to use as objects from a possible 531. plFiberPlate : 26 possible sky positions to use as objects from a possible 530. plFiberPlate : 22 possible sky positions to use as objects from a possible 529. plFiberPlate : 28 possible sky positions to use as objects from a possible 528. plFiberPlate : 57 possible sky positions to use as objects from a possible 527. plFiberPlate : 98 possible sky positions to use as objects from a possible 526. plFiberPlate : 70 possible sky positions to use as objects from a possible 525. plFiberPlate : 58 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 5 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 44 possible sky positions to use as objects from a possible 518. plFiberPlate : 74 possible sky positions to use as objects from a possible 517. plFiberPlate : 57 possible sky positions to use as objects from a possible 516. plFiberPlate : 22 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : 3 possible sky positions to use as objects from a possible 512. plFiberPlate : 3 possible sky positions to use as objects from a possible 511. plFiberPlate : 22 possible sky positions to use as objects from a possible 510. plFiberPlate : 22 possible sky positions to use as objects from a possible 509. plFiberPlate : 34 possible sky positions to use as objects from a possible 508. plFiberPlate : 19 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 10 possible sky positions to use as objects from a possible 505. plFiberPlate : 5 possible sky positions to use as objects from a possible 504. plFiberPlate : 13 possible sky positions to use as objects from a possible 503. plFiberPlate : 17 possible sky positions to use as objects from a possible 502. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1492.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1493.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1493.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1494.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 110 2 11 74 3 10 71 4 17 114 5 18 131 6 12 79 7 9 78 8 11 113 9 14 94 10 22 140 11 15 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 142 34 plFiberPlate : adding spectro-photo std with objId = 94 4 1 225 37 plFiberPlate : adding spectro-photo std with objId = 125 4 3 135 59 plFiberPlate : adding spectro-photo std with objId = 94 4 6 222 26 plFiberPlate : adding spectro-photo std with objId = 94 4 4 236 8 plFiberPlate : adding spectro-photo std with objId = 125 4 3 134 16 plFiberPlate : adding spectro-photo std with objId = 94 4 5 235 6 plFiberPlate : adding spectro-photo std with objId = 125 4 4 132 76 plFiberPlate : 128 possible sky positions to use as objects from a possible 546. plFiberPlate : 80 possible sky positions to use as objects from a possible 545. plFiberPlate : 49 possible sky positions to use as objects from a possible 544. plFiberPlate : 38 possible sky positions to use as objects from a possible 543. plFiberPlate : 35 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 38 possible sky positions to use as objects from a possible 540. plFiberPlate : 90 possible sky positions to use as objects from a possible 539. plFiberPlate : 80 possible sky positions to use as objects from a possible 538. plFiberPlate : 43 possible sky positions to use as objects from a possible 537. plFiberPlate : 30 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 11 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 33 possible sky positions to use as objects from a possible 531. plFiberPlate : 77 possible sky positions to use as objects from a possible 530. plFiberPlate : 55 possible sky positions to use as objects from a possible 529. plFiberPlate : 43 possible sky positions to use as objects from a possible 528. plFiberPlate : 18 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 9 possible sky positions to use as objects from a possible 525. plFiberPlate : 25 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 51 possible sky positions to use as objects from a possible 521. plFiberPlate : 39 possible sky positions to use as objects from a possible 520. plFiberPlate : 19 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 14 possible sky positions to use as objects from a possible 517. plFiberPlate : 19 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1493.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1494.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1494.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1495.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 115 2 4 64 3 16 63 4 21 112 5 13 133 6 7 75 7 4 59 8 7 85 9 9 111 10 13 124 11 7 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 153 53 plFiberPlate : adding spectro-photo std with objId = 94 4 4 236 8 plFiberPlate : adding spectro-photo std with objId = 94 4 5 243 21 plFiberPlate : adding spectro-photo std with objId = 125 4 3 139 6 plFiberPlate : adding spectro-photo std with objId = 125 4 6 148 31 plFiberPlate : adding spectro-photo std with objId = 94 4 5 235 6 plFiberPlate : adding spectro-photo std with objId = 94 4 2 240 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 243 58 plFiberPlate : 113 possible sky positions to use as objects from a possible 545. plFiberPlate : 51 possible sky positions to use as objects from a possible 544. plFiberPlate : 31 possible sky positions to use as objects from a possible 543. plFiberPlate : 25 possible sky positions to use as objects from a possible 542. plFiberPlate : 19 possible sky positions to use as objects from a possible 541. plFiberPlate : 18 possible sky positions to use as objects from a possible 540. plFiberPlate : 46 possible sky positions to use as objects from a possible 539. plFiberPlate : 96 possible sky positions to use as objects from a possible 538. plFiberPlate : 60 possible sky positions to use as objects from a possible 537. plFiberPlate : 20 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 12 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : 30 possible sky positions to use as objects from a possible 531. plFiberPlate : 28 possible sky positions to use as objects from a possible 530. plFiberPlate : 90 possible sky positions to use as objects from a possible 529. plFiberPlate : 55 possible sky positions to use as objects from a possible 528. plFiberPlate : 33 possible sky positions to use as objects from a possible 527. plFiberPlate : 15 possible sky positions to use as objects from a possible 526. plFiberPlate : 12 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 7 possible sky positions to use as objects from a possible 523. plFiberPlate : 9 possible sky positions to use as objects from a possible 522. plFiberPlate : 20 possible sky positions to use as objects from a possible 521. plFiberPlate : 42 possible sky positions to use as objects from a possible 520. plFiberPlate : 24 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 4 possible sky positions to use as objects from a possible 516. plFiberPlate : 14 possible sky positions to use as objects from a possible 515. plFiberPlate : 9 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1494.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1495.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1495.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1496.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 96 2 7 65 3 5 76 4 6 125 5 14 138 6 11 90 7 13 66 8 14 92 9 14 113 10 12 154 11 6 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 5 160 16 plFiberPlate : adding spectro-photo std with objId = 125 4 5 160 42 plFiberPlate : adding spectro-photo std with objId = 94 4 1 258 19 plFiberPlate : adding spectro-photo std with objId = 94 4 1 260 11 plFiberPlate : adding spectro-photo std with objId = 94 4 6 254 35 plFiberPlate : adding spectro-photo std with objId = 94 4 2 247 45 plFiberPlate : adding spectro-photo std with objId = 125 4 6 167 26 plFiberPlate : adding spectro-photo std with objId = 125 4 3 161 65 plFiberPlate : 139 possible sky positions to use as objects from a possible 558. plFiberPlate : 98 possible sky positions to use as objects from a possible 557. plFiberPlate : 39 possible sky positions to use as objects from a possible 556. plFiberPlate : 22 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : 38 possible sky positions to use as objects from a possible 552. plFiberPlate : 105 possible sky positions to use as objects from a possible 551. plFiberPlate : 83 possible sky positions to use as objects from a possible 550. plFiberPlate : 55 possible sky positions to use as objects from a possible 549. plFiberPlate : 21 possible sky positions to use as objects from a possible 548. plFiberPlate : 13 possible sky positions to use as objects from a possible 547. plFiberPlate : 14 possible sky positions to use as objects from a possible 546. plFiberPlate : 26 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 15 possible sky positions to use as objects from a possible 543. plFiberPlate : 55 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 28 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 19 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 16 possible sky positions to use as objects from a possible 534. plFiberPlate : 58 possible sky positions to use as objects from a possible 533. plFiberPlate : 36 possible sky positions to use as objects from a possible 532. plFiberPlate : 24 possible sky positions to use as objects from a possible 531. plFiberPlate : 9 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 11 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1495.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1496.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1496.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1497.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 117 2 16 62 3 4 56 4 10 98 5 20 128 6 9 75 7 4 77 8 7 115 9 11 97 10 16 115 11 16 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 1 176 68 plFiberPlate : adding spectro-photo std with objId = 125 4 5 180 25 plFiberPlate : adding spectro-photo std with objId = 94 4 3 271 45 plFiberPlate : adding spectro-photo std with objId = 125 4 6 177 8 plFiberPlate : adding spectro-photo std with objId = 125 4 3 181 11 plFiberPlate : adding spectro-photo std with objId = 125 4 5 176 32 plFiberPlate : adding spectro-photo std with objId = 94 4 1 260 11 plFiberPlate : adding spectro-photo std with objId = 125 4 5 175 32 plFiberPlate : 101 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 31 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 23 possible sky positions to use as objects from a possible 530. plFiberPlate : 34 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 77 possible sky positions to use as objects from a possible 527. plFiberPlate : 61 possible sky positions to use as objects from a possible 526. plFiberPlate : 28 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 11 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : 24 possible sky positions to use as objects from a possible 520. plFiberPlate : 20 possible sky positions to use as objects from a possible 519. plFiberPlate : 60 possible sky positions to use as objects from a possible 518. plFiberPlate : 59 possible sky positions to use as objects from a possible 517. plFiberPlate : 15 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 6 possible sky positions to use as objects from a possible 514. plFiberPlate : 7 possible sky positions to use as objects from a possible 513. plFiberPlate : 21 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 31 possible sky positions to use as objects from a possible 510. plFiberPlate : 61 possible sky positions to use as objects from a possible 509. plFiberPlate : 36 possible sky positions to use as objects from a possible 508. plFiberPlate : 21 possible sky positions to use as objects from a possible 507. plFiberPlate : 24 possible sky positions to use as objects from a possible 506. plFiberPlate : 9 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 22 possible sky positions to use as objects from a possible 503. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1496.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1497.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1497.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1498.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 132 2 15 66 3 3 60 4 14 89 5 15 126 6 10 83 7 13 87 8 19 128 9 9 104 10 19 116 11 17 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 277 51 plFiberPlate : adding spectro-photo std with objId = 125 4 2 191 95 plFiberPlate : adding spectro-photo std with objId = 94 4 6 284 9 plFiberPlate : adding spectro-photo std with objId = 125 4 3 181 11 plFiberPlate : adding spectro-photo std with objId = 125 4 6 190 75 plFiberPlate : adding spectro-photo std with objId = 94 4 4 269 16 plFiberPlate : adding spectro-photo std with objId = 94 4 4 287 15 plFiberPlate : adding spectro-photo std with objId = 94 4 3 271 34 plFiberPlate : 95 possible sky positions to use as objects from a possible 553. plFiberPlate : 51 possible sky positions to use as objects from a possible 552. plFiberPlate : 33 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 24 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 60 possible sky positions to use as objects from a possible 547. plFiberPlate : 64 possible sky positions to use as objects from a possible 546. plFiberPlate : 52 possible sky positions to use as objects from a possible 545. plFiberPlate : 34 possible sky positions to use as objects from a possible 544. plFiberPlate : 22 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 23 possible sky positions to use as objects from a possible 539. plFiberPlate : 55 possible sky positions to use as objects from a possible 538. plFiberPlate : 95 possible sky positions to use as objects from a possible 537. plFiberPlate : 83 possible sky positions to use as objects from a possible 536. plFiberPlate : 63 possible sky positions to use as objects from a possible 535. plFiberPlate : 41 possible sky positions to use as objects from a possible 534. plFiberPlate : 19 possible sky positions to use as objects from a possible 533. plFiberPlate : 4 possible sky positions to use as objects from a possible 532. plFiberPlate : 27 possible sky positions to use as objects from a possible 531. plFiberPlate : 27 possible sky positions to use as objects from a possible 530. plFiberPlate : 34 possible sky positions to use as objects from a possible 529. plFiberPlate : 51 possible sky positions to use as objects from a possible 528. plFiberPlate : 34 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 6 possible sky positions to use as objects from a possible 523. plFiberPlate : 36 possible sky positions to use as objects from a possible 522. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1497.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1498.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1498.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1499.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 133 2 9 85 3 5 77 4 7 98 5 12 113 6 8 77 7 10 67 8 13 111 9 11 96 10 14 153 11 14 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 4 201 33 plFiberPlate : adding spectro-photo std with objId = 125 4 1 195 7 plFiberPlate : adding spectro-photo std with objId = 94 4 5 288 10 plFiberPlate : adding spectro-photo std with objId = 94 4 1 289 58 plFiberPlate : adding spectro-photo std with objId = 94 4 3 286 37 plFiberPlate : adding spectro-photo std with objId = 125 4 6 204 51 plFiberPlate : adding spectro-photo std with objId = 94 4 3 282 23 plFiberPlate : adding spectro-photo std with objId = 94 4 6 294 24 plFiberPlate : 115 possible sky positions to use as objects from a possible 556. plFiberPlate : 76 possible sky positions to use as objects from a possible 555. plFiberPlate : 51 possible sky positions to use as objects from a possible 554. plFiberPlate : 31 possible sky positions to use as objects from a possible 553. plFiberPlate : 33 possible sky positions to use as objects from a possible 552. plFiberPlate : 23 possible sky positions to use as objects from a possible 551. plFiberPlate : 79 possible sky positions to use as objects from a possible 550. plFiberPlate : 74 possible sky positions to use as objects from a possible 549. plFiberPlate : 65 possible sky positions to use as objects from a possible 548. plFiberPlate : 45 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 15 possible sky positions to use as objects from a possible 545. plFiberPlate : 20 possible sky positions to use as objects from a possible 544. plFiberPlate : 35 possible sky positions to use as objects from a possible 543. plFiberPlate : 20 possible sky positions to use as objects from a possible 542. plFiberPlate : 21 possible sky positions to use as objects from a possible 541. plFiberPlate : 61 possible sky positions to use as objects from a possible 540. plFiberPlate : 55 possible sky positions to use as objects from a possible 539. plFiberPlate : 29 possible sky positions to use as objects from a possible 538. plFiberPlate : 19 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 8 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 29 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 49 possible sky positions to use as objects from a possible 531. plFiberPlate : 21 possible sky positions to use as objects from a possible 530. plFiberPlate : 15 possible sky positions to use as objects from a possible 529. plFiberPlate : 4 possible sky positions to use as objects from a possible 528. plFiberPlate : 9 possible sky positions to use as objects from a possible 527. plFiberPlate : 8 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1498.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1499.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1499.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1500.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 131 2 11 72 3 10 73 4 9 103 5 12 101 6 12 74 7 9 82 8 16 138 9 22 95 10 17 128 11 19 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 3 310 10 plFiberPlate : adding spectro-photo std with objId = 125 4 6 214 77 plFiberPlate : adding spectro-photo std with objId = 125 4 1 202 28 plFiberPlate : adding spectro-photo std with objId = 125 4 6 201 28 plFiberPlate : adding spectro-photo std with objId = 125 4 5 208 14 plFiberPlate : adding spectro-photo std with objId = 125 4 3 207 15 plFiberPlate : adding spectro-photo std with objId = 125 4 1 212 47 plFiberPlate : adding spectro-photo std with objId = 125 4 5 211 23 plFiberPlate : 111 possible sky positions to use as objects from a possible 546. plFiberPlate : 73 possible sky positions to use as objects from a possible 545. plFiberPlate : 35 possible sky positions to use as objects from a possible 544. plFiberPlate : 15 possible sky positions to use as objects from a possible 543. plFiberPlate : 22 possible sky positions to use as objects from a possible 542. plFiberPlate : 29 possible sky positions to use as objects from a possible 541. plFiberPlate : 73 possible sky positions to use as objects from a possible 540. plFiberPlate : 77 possible sky positions to use as objects from a possible 539. plFiberPlate : 56 possible sky positions to use as objects from a possible 538. plFiberPlate : 36 possible sky positions to use as objects from a possible 537. plFiberPlate : 20 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 5 possible sky positions to use as objects from a possible 534. plFiberPlate : 11 possible sky positions to use as objects from a possible 533. plFiberPlate : 26 possible sky positions to use as objects from a possible 532. plFiberPlate : 34 possible sky positions to use as objects from a possible 531. plFiberPlate : 68 possible sky positions to use as objects from a possible 530. plFiberPlate : 48 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 5 possible sky positions to use as objects from a possible 525. plFiberPlate : 18 possible sky positions to use as objects from a possible 524. plFiberPlate : 26 possible sky positions to use as objects from a possible 523. plFiberPlate : 24 possible sky positions to use as objects from a possible 522. plFiberPlate : 35 possible sky positions to use as objects from a possible 521. plFiberPlate : 26 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 8 possible sky positions to use as objects from a possible 517. plFiberPlate : 7 possible sky positions to use as objects from a possible 516. plFiberPlate : 27 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1499.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1500.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1500.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1501.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 126 2 7 72 3 8 67 4 13 95 5 9 93 6 4 60 7 5 72 8 15 123 9 8 97 10 17 140 11 13 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 5 221 2 plFiberPlate : adding spectro-photo std with objId = 125 4 5 227 94 plFiberPlate : adding spectro-photo std with objId = 94 4 1 307 46 plFiberPlate : adding spectro-photo std with objId = 125 4 6 223 44 plFiberPlate : adding spectro-photo std with objId = 125 4 2 215 62 plFiberPlate : adding spectro-photo std with objId = 125 4 6 222 47 plFiberPlate : adding spectro-photo std with objId = 94 4 3 305 21 plFiberPlate : adding spectro-photo std with objId = 125 4 4 226 19 plFiberPlate : 113 possible sky positions to use as objects from a possible 529. plFiberPlate : 71 possible sky positions to use as objects from a possible 528. plFiberPlate : 37 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 19 possible sky positions to use as objects from a possible 525. plFiberPlate : 34 possible sky positions to use as objects from a possible 524. plFiberPlate : 42 possible sky positions to use as objects from a possible 523. plFiberPlate : 75 possible sky positions to use as objects from a possible 522. plFiberPlate : 67 possible sky positions to use as objects from a possible 521. plFiberPlate : 37 possible sky positions to use as objects from a possible 520. plFiberPlate : 19 possible sky positions to use as objects from a possible 519. plFiberPlate : 6 possible sky positions to use as objects from a possible 518. plFiberPlate : 11 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 26 possible sky positions to use as objects from a possible 515. plFiberPlate : 34 possible sky positions to use as objects from a possible 514. plFiberPlate : 58 possible sky positions to use as objects from a possible 513. plFiberPlate : 45 possible sky positions to use as objects from a possible 512. plFiberPlate : 19 possible sky positions to use as objects from a possible 511. plFiberPlate : 9 possible sky positions to use as objects from a possible 510. plFiberPlate : 9 possible sky positions to use as objects from a possible 509. plFiberPlate : 7 possible sky positions to use as objects from a possible 508. plFiberPlate : 16 possible sky positions to use as objects from a possible 507. plFiberPlate : 22 possible sky positions to use as objects from a possible 506. plFiberPlate : 30 possible sky positions to use as objects from a possible 505. plFiberPlate : 33 possible sky positions to use as objects from a possible 504. plFiberPlate : 19 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 7 possible sky positions to use as objects from a possible 501. plFiberPlate : 4 possible sky positions to use as objects from a possible 500. plFiberPlate : 14 possible sky positions to use as objects from a possible 499. plFiberPlate : 16 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1500.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1501.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1501.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1502.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 129 2 9 78 3 6 67 4 13 101 5 14 101 6 6 51 7 5 65 8 13 112 9 10 94 10 16 131 11 13 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 6 329 40 plFiberPlate : adding spectro-photo std with objId = 125 4 5 234 14 plFiberPlate : adding spectro-photo std with objId = 94 4 5 320 22 plFiberPlate : adding spectro-photo std with objId = 94 4 3 317 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 323 10 plFiberPlate : adding spectro-photo std with objId = 125 4 4 236 2 plFiberPlate : adding spectro-photo std with objId = 125 4 1 230 24 plFiberPlate : adding spectro-photo std with objId = 94 4 3 329 42 plFiberPlate : 108 possible sky positions to use as objects from a possible 529. plFiberPlate : 57 possible sky positions to use as objects from a possible 528. plFiberPlate : 26 possible sky positions to use as objects from a possible 527. plFiberPlate : 21 possible sky positions to use as objects from a possible 526. plFiberPlate : 32 possible sky positions to use as objects from a possible 525. plFiberPlate : 26 possible sky positions to use as objects from a possible 524. plFiberPlate : 52 possible sky positions to use as objects from a possible 523. plFiberPlate : 85 possible sky positions to use as objects from a possible 522. plFiberPlate : 53 possible sky positions to use as objects from a possible 521. plFiberPlate : 25 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 12 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 20 possible sky positions to use as objects from a possible 515. plFiberPlate : 28 possible sky positions to use as objects from a possible 514. plFiberPlate : 94 possible sky positions to use as objects from a possible 513. plFiberPlate : 62 possible sky positions to use as objects from a possible 512. plFiberPlate : 39 possible sky positions to use as objects from a possible 511. plFiberPlate : 25 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 9 possible sky positions to use as objects from a possible 508. plFiberPlate : 15 possible sky positions to use as objects from a possible 507. plFiberPlate : 21 possible sky positions to use as objects from a possible 506. plFiberPlate : 29 possible sky positions to use as objects from a possible 505. plFiberPlate : 36 possible sky positions to use as objects from a possible 504. plFiberPlate : 21 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 12 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 17 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1501.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1502.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1502.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1503.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 132 2 15 69 3 3 52 4 8 85 5 13 112 6 8 86 7 6 72 8 10 116 9 6 99 10 12 128 11 16 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 6 249 45 plFiberPlate : adding spectro-photo std with objId = 125 4 2 243 15 plFiberPlate : adding spectro-photo std with objId = 94 4 6 342 6 plFiberPlate : adding spectro-photo std with objId = 125 4 2 255 11 plFiberPlate : adding spectro-photo std with objId = 125 4 2 245 2 plFiberPlate : adding spectro-photo std with objId = 125 4 3 254 73 plFiberPlate : adding spectro-photo std with objId = 125 4 5 244 37 plFiberPlate : adding spectro-photo std with objId = 94 4 4 340 15 plFiberPlate : 95 possible sky positions to use as objects from a possible 531. plFiberPlate : 63 possible sky positions to use as objects from a possible 530. plFiberPlate : 43 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 56 possible sky positions to use as objects from a possible 526. plFiberPlate : 64 possible sky positions to use as objects from a possible 525. plFiberPlate : 68 possible sky positions to use as objects from a possible 524. plFiberPlate : 43 possible sky positions to use as objects from a possible 523. plFiberPlate : 32 possible sky positions to use as objects from a possible 522. plFiberPlate : 19 possible sky positions to use as objects from a possible 521. plFiberPlate : 15 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 16 possible sky positions to use as objects from a possible 518. plFiberPlate : 25 possible sky positions to use as objects from a possible 517. plFiberPlate : 37 possible sky positions to use as objects from a possible 516. plFiberPlate : 60 possible sky positions to use as objects from a possible 515. plFiberPlate : 35 possible sky positions to use as objects from a possible 514. plFiberPlate : 21 possible sky positions to use as objects from a possible 513. plFiberPlate : 17 possible sky positions to use as objects from a possible 512. plFiberPlate : 13 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 8 possible sky positions to use as objects from a possible 509. plFiberPlate : 21 possible sky positions to use as objects from a possible 508. plFiberPlate : 28 possible sky positions to use as objects from a possible 507. plFiberPlate : 55 possible sky positions to use as objects from a possible 506. plFiberPlate : 33 possible sky positions to use as objects from a possible 505. plFiberPlate : 19 possible sky positions to use as objects from a possible 504. plFiberPlate : 10 possible sky positions to use as objects from a possible 503. plFiberPlate : 6 possible sky positions to use as objects from a possible 502. plFiberPlate : 14 possible sky positions to use as objects from a possible 501. plFiberPlate : 16 possible sky positions to use as objects from a possible 500. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1502.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1503.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1503.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1504.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 124 2 9 65 3 7 68 4 17 95 5 11 117 6 5 77 7 7 79 8 10 118 9 9 108 10 21 126 11 12 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 5 361 10 plFiberPlate : adding spectro-photo std with objId = 94 4 6 354 34 plFiberPlate : adding spectro-photo std with objId = 125 4 2 257 77 plFiberPlate : adding spectro-photo std with objId = 125 4 3 266 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 257 46 plFiberPlate : adding spectro-photo std with objId = 125 4 4 262 27 plFiberPlate : adding spectro-photo std with objId = 125 4 3 265 54 plFiberPlate : adding spectro-photo std with objId = 125 4 5 260 77 plFiberPlate : 107 possible sky positions to use as objects from a possible 543. plFiberPlate : 67 possible sky positions to use as objects from a possible 542. plFiberPlate : 37 possible sky positions to use as objects from a possible 541. plFiberPlate : 36 possible sky positions to use as objects from a possible 540. plFiberPlate : 14 possible sky positions to use as objects from a possible 539. plFiberPlate : 26 possible sky positions to use as objects from a possible 538. plFiberPlate : 67 possible sky positions to use as objects from a possible 537. plFiberPlate : 74 possible sky positions to use as objects from a possible 536. plFiberPlate : 52 possible sky positions to use as objects from a possible 535. plFiberPlate : 24 possible sky positions to use as objects from a possible 534. plFiberPlate : 15 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : 24 possible sky positions to use as objects from a possible 529. plFiberPlate : 27 possible sky positions to use as objects from a possible 528. plFiberPlate : 90 possible sky positions to use as objects from a possible 527. plFiberPlate : 48 possible sky positions to use as objects from a possible 526. plFiberPlate : 46 possible sky positions to use as objects from a possible 525. plFiberPlate : 29 possible sky positions to use as objects from a possible 524. plFiberPlate : 22 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 22 possible sky positions to use as objects from a possible 520. plFiberPlate : 36 possible sky positions to use as objects from a possible 519. plFiberPlate : 52 possible sky positions to use as objects from a possible 518. plFiberPlate : 23 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 8 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 16 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1503.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1504.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1504.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1505.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 115 2 9 70 3 3 74 4 10 97 5 14 109 6 10 63 7 9 66 8 18 113 9 10 111 10 19 129 11 18 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 270 2 plFiberPlate : adding spectro-photo std with objId = 125 4 5 273 27 plFiberPlate : adding spectro-photo std with objId = 125 4 2 278 47 plFiberPlate : adding spectro-photo std with objId = 94 4 5 365 4 plFiberPlate : adding spectro-photo std with objId = 94 4 4 362 23 plFiberPlate : adding spectro-photo std with objId = 94 4 3 375 26 plFiberPlate : adding spectro-photo std with objId = 125 4 3 278 59 plFiberPlate : adding spectro-photo std with objId = 125 4 6 277 9 plFiberPlate : 107 possible sky positions to use as objects from a possible 528. plFiberPlate : 48 possible sky positions to use as objects from a possible 527. plFiberPlate : 35 possible sky positions to use as objects from a possible 526. plFiberPlate : 33 possible sky positions to use as objects from a possible 525. plFiberPlate : 19 possible sky positions to use as objects from a possible 524. plFiberPlate : 25 possible sky positions to use as objects from a possible 523. plFiberPlate : 52 possible sky positions to use as objects from a possible 522. plFiberPlate : 84 possible sky positions to use as objects from a possible 521. plFiberPlate : 67 possible sky positions to use as objects from a possible 520. plFiberPlate : 51 possible sky positions to use as objects from a possible 519. plFiberPlate : 35 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 20 possible sky positions to use as objects from a possible 516. plFiberPlate : 26 possible sky positions to use as objects from a possible 515. plFiberPlate : 17 possible sky positions to use as objects from a possible 514. plFiberPlate : 25 possible sky positions to use as objects from a possible 513. plFiberPlate : 66 possible sky positions to use as objects from a possible 512. plFiberPlate : 47 possible sky positions to use as objects from a possible 511. plFiberPlate : 31 possible sky positions to use as objects from a possible 510. plFiberPlate : 13 possible sky positions to use as objects from a possible 509. plFiberPlate : 4 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 16 possible sky positions to use as objects from a possible 506. plFiberPlate : 23 possible sky positions to use as objects from a possible 505. plFiberPlate : 18 possible sky positions to use as objects from a possible 504. plFiberPlate : 34 possible sky positions to use as objects from a possible 503. plFiberPlate : 23 possible sky positions to use as objects from a possible 502. plFiberPlate : 17 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 14 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1504.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1505.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1505.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1506.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 124 2 8 65 3 9 57 4 11 90 5 15 100 6 9 65 7 8 68 8 17 121 9 6 92 10 13 113 11 8 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 278 47 plFiberPlate : adding spectro-photo std with objId = 125 4 2 283 20 plFiberPlate : adding spectro-photo std with objId = 125 4 6 279 10 plFiberPlate : adding spectro-photo std with objId = 125 4 2 295 39 plFiberPlate : adding spectro-photo std with objId = 125 4 3 278 59 plFiberPlate : adding spectro-photo std with objId = 125 4 5 277 28 plFiberPlate : adding spectro-photo std with objId = 125 4 6 293 6 plFiberPlate : adding spectro-photo std with objId = 125 4 5 288 25 plFiberPlate : 102 possible sky positions to use as objects from a possible 516. plFiberPlate : 55 possible sky positions to use as objects from a possible 515. plFiberPlate : 33 possible sky positions to use as objects from a possible 514. plFiberPlate : 23 possible sky positions to use as objects from a possible 513. plFiberPlate : 25 possible sky positions to use as objects from a possible 512. plFiberPlate : 26 possible sky positions to use as objects from a possible 511. plFiberPlate : 62 possible sky positions to use as objects from a possible 510. plFiberPlate : 72 possible sky positions to use as objects from a possible 509. plFiberPlate : 52 possible sky positions to use as objects from a possible 508. plFiberPlate : 35 possible sky positions to use as objects from a possible 507. plFiberPlate : 22 possible sky positions to use as objects from a possible 506. plFiberPlate : 16 possible sky positions to use as objects from a possible 505. plFiberPlate : 15 possible sky positions to use as objects from a possible 504. plFiberPlate : 13 possible sky positions to use as objects from a possible 503. plFiberPlate : 26 possible sky positions to use as objects from a possible 502. plFiberPlate : 19 possible sky positions to use as objects from a possible 501. plFiberPlate : 56 possible sky positions to use as objects from a possible 500. plFiberPlate : 54 possible sky positions to use as objects from a possible 499. plFiberPlate : 22 possible sky positions to use as objects from a possible 498. plFiberPlate : 14 possible sky positions to use as objects from a possible 497. plFiberPlate : 12 possible sky positions to use as objects from a possible 496. plFiberPlate : 15 possible sky positions to use as objects from a possible 495. plFiberPlate : 9 possible sky positions to use as objects from a possible 494. plFiberPlate : 35 possible sky positions to use as objects from a possible 493. plFiberPlate : 20 possible sky positions to use as objects from a possible 492. plFiberPlate : 31 possible sky positions to use as objects from a possible 491. plFiberPlate : 18 possible sky positions to use as objects from a possible 490. plFiberPlate : 10 possible sky positions to use as objects from a possible 489. plFiberPlate : 9 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 5 possible sky positions to use as objects from a possible 486. plFiberPlate : 16 possible sky positions to use as objects from a possible 485. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1505.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1506.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1506.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1507.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 121 2 11 76 3 9 60 4 12 95 5 13 117 6 6 73 7 9 75 8 17 110 9 13 92 10 14 130 11 14 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 3 402 8 plFiberPlate : adding spectro-photo std with objId = 125 4 6 293 8 plFiberPlate : adding spectro-photo std with objId = 125 4 3 307 30 plFiberPlate : adding spectro-photo std with objId = 94 4 5 390 39 plFiberPlate : adding spectro-photo std with objId = 125 4 2 294 21 plFiberPlate : adding spectro-photo std with objId = 125 4 1 301 8 plFiberPlate : adding spectro-photo std with objId = 125 4 4 290 19 plFiberPlate : adding spectro-photo std with objId = 125 4 4 306 38 plFiberPlate : 102 possible sky positions to use as objects from a possible 524. plFiberPlate : 60 possible sky positions to use as objects from a possible 523. plFiberPlate : 31 possible sky positions to use as objects from a possible 522. plFiberPlate : 24 possible sky positions to use as objects from a possible 521. plFiberPlate : 21 possible sky positions to use as objects from a possible 520. plFiberPlate : 27 possible sky positions to use as objects from a possible 519. plFiberPlate : 38 possible sky positions to use as objects from a possible 518. plFiberPlate : 65 possible sky positions to use as objects from a possible 517. plFiberPlate : 48 possible sky positions to use as objects from a possible 516. plFiberPlate : 31 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 5 possible sky positions to use as objects from a possible 513. plFiberPlate : 18 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 18 possible sky positions to use as objects from a possible 510. plFiberPlate : 23 possible sky positions to use as objects from a possible 509. plFiberPlate : 79 possible sky positions to use as objects from a possible 508. plFiberPlate : 45 possible sky positions to use as objects from a possible 507. plFiberPlate : 25 possible sky positions to use as objects from a possible 506. plFiberPlate : 21 possible sky positions to use as objects from a possible 505. plFiberPlate : 9 possible sky positions to use as objects from a possible 504. plFiberPlate : 11 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 38 possible sky positions to use as objects from a possible 500. plFiberPlate : 39 possible sky positions to use as objects from a possible 499. plFiberPlate : 30 possible sky positions to use as objects from a possible 498. plFiberPlate : 18 possible sky positions to use as objects from a possible 497. plFiberPlate : 14 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 9 possible sky positions to use as objects from a possible 494. plFiberPlate : 13 possible sky positions to use as objects from a possible 493. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1506.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1507.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1507.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1508.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 112 2 10 74 3 8 83 4 17 105 5 15 110 6 11 52 7 4 57 8 8 102 9 11 93 10 27 125 11 20 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 310 61 plFiberPlate : adding spectro-photo std with objId = 125 4 2 316 7 plFiberPlate : adding spectro-photo std with objId = 94 4 6 412 13 plFiberPlate : adding spectro-photo std with objId = 94 4 5 407 17 plFiberPlate : adding spectro-photo std with objId = 94 4 4 403 17 plFiberPlate : adding spectro-photo std with objId = 125 4 4 314 7 plFiberPlate : adding spectro-photo std with objId = 94 4 3 406 13 plFiberPlate : adding spectro-photo std with objId = 94 4 4 414 31 plFiberPlate : 115 possible sky positions to use as objects from a possible 515. plFiberPlate : 72 possible sky positions to use as objects from a possible 514. plFiberPlate : 28 possible sky positions to use as objects from a possible 513. plFiberPlate : 18 possible sky positions to use as objects from a possible 512. plFiberPlate : 15 possible sky positions to use as objects from a possible 511. plFiberPlate : 29 possible sky positions to use as objects from a possible 510. plFiberPlate : 53 possible sky positions to use as objects from a possible 509. plFiberPlate : 80 possible sky positions to use as objects from a possible 508. plFiberPlate : 59 possible sky positions to use as objects from a possible 507. plFiberPlate : 36 possible sky positions to use as objects from a possible 506. plFiberPlate : 25 possible sky positions to use as objects from a possible 505. plFiberPlate : 15 possible sky positions to use as objects from a possible 504. plFiberPlate : 10 possible sky positions to use as objects from a possible 503. plFiberPlate : 8 possible sky positions to use as objects from a possible 502. plFiberPlate : 28 possible sky positions to use as objects from a possible 501. plFiberPlate : 34 possible sky positions to use as objects from a possible 500. plFiberPlate : 79 possible sky positions to use as objects from a possible 499. plFiberPlate : 49 possible sky positions to use as objects from a possible 498. plFiberPlate : 26 possible sky positions to use as objects from a possible 497. plFiberPlate : 21 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 17 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : 24 possible sky positions to use as objects from a possible 492. plFiberPlate : 9 possible sky positions to use as objects from a possible 491. plFiberPlate : 39 possible sky positions to use as objects from a possible 490. plFiberPlate : 22 possible sky positions to use as objects from a possible 489. plFiberPlate : 9 possible sky positions to use as objects from a possible 488. plFiberPlate : 12 possible sky positions to use as objects from a possible 487. plFiberPlate : 13 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 14 possible sky positions to use as objects from a possible 484. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1507.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1508.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1508.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1509.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 111 2 8 66 3 8 55 4 11 100 5 17 128 6 9 76 7 5 68 8 8 113 9 9 103 10 14 122 11 16 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 415 29 plFiberPlate : adding spectro-photo std with objId = 94 4 1 421 45 plFiberPlate : adding spectro-photo std with objId = 125 4 6 324 2 plFiberPlate : adding spectro-photo std with objId = 94 4 6 419 23 plFiberPlate : adding spectro-photo std with objId = 125 4 3 333 2 plFiberPlate : adding spectro-photo std with objId = 94 4 4 427 19 plFiberPlate : adding spectro-photo std with objId = 125 4 4 325 52 plFiberPlate : adding spectro-photo std with objId = 94 4 3 424 29 plFiberPlate : 105 possible sky positions to use as objects from a possible 529. plFiberPlate : 54 possible sky positions to use as objects from a possible 528. plFiberPlate : 28 possible sky positions to use as objects from a possible 527. plFiberPlate : 21 possible sky positions to use as objects from a possible 526. plFiberPlate : 24 possible sky positions to use as objects from a possible 525. plFiberPlate : 30 possible sky positions to use as objects from a possible 524. plFiberPlate : 45 possible sky positions to use as objects from a possible 523. plFiberPlate : 66 possible sky positions to use as objects from a possible 522. plFiberPlate : 57 possible sky positions to use as objects from a possible 521. plFiberPlate : 23 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 11 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 26 possible sky positions to use as objects from a possible 514. plFiberPlate : 83 possible sky positions to use as objects from a possible 513. plFiberPlate : 39 possible sky positions to use as objects from a possible 512. plFiberPlate : 19 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 8 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 20 possible sky positions to use as objects from a possible 506. plFiberPlate : 24 possible sky positions to use as objects from a possible 505. plFiberPlate : 46 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 13 possible sky positions to use as objects from a possible 502. plFiberPlate : 4 possible sky positions to use as objects from a possible 501. plFiberPlate : 9 possible sky positions to use as objects from a possible 500. plFiberPlate : 8 possible sky positions to use as objects from a possible 499. plFiberPlate : 23 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1508.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1509.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1509.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1510.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 114 2 5 85 3 8 65 4 12 101 5 12 122 6 8 76 7 9 60 8 9 96 9 13 101 10 13 137 11 9 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 336 20 plFiberPlate : adding spectro-photo std with objId = 125 4 2 344 20 plFiberPlate : adding spectro-photo std with objId = 94 4 4 435 14 plFiberPlate : adding spectro-photo std with objId = 125 4 6 348 51 plFiberPlate : adding spectro-photo std with objId = 94 4 6 435 36 plFiberPlate : adding spectro-photo std with objId = 94 4 4 427 19 plFiberPlate : adding spectro-photo std with objId = 94 4 3 427 34 plFiberPlate : adding spectro-photo std with objId = 125 4 3 348 39 plFiberPlate : 119 possible sky positions to use as objects from a possible 525. plFiberPlate : 66 possible sky positions to use as objects from a possible 524. plFiberPlate : 35 possible sky positions to use as objects from a possible 523. plFiberPlate : 36 possible sky positions to use as objects from a possible 522. plFiberPlate : 29 possible sky positions to use as objects from a possible 521. plFiberPlate : 28 possible sky positions to use as objects from a possible 520. plFiberPlate : 27 possible sky positions to use as objects from a possible 519. plFiberPlate : 84 possible sky positions to use as objects from a possible 518. plFiberPlate : 52 possible sky positions to use as objects from a possible 517. plFiberPlate : 27 possible sky positions to use as objects from a possible 516. plFiberPlate : 11 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 9 possible sky positions to use as objects from a possible 513. plFiberPlate : 18 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 18 possible sky positions to use as objects from a possible 510. plFiberPlate : 89 possible sky positions to use as objects from a possible 509. plFiberPlate : 51 possible sky positions to use as objects from a possible 508. plFiberPlate : 34 possible sky positions to use as objects from a possible 507. plFiberPlate : 14 possible sky positions to use as objects from a possible 506. plFiberPlate : 5 possible sky positions to use as objects from a possible 505. plFiberPlate : 19 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 20 possible sky positions to use as objects from a possible 502. plFiberPlate : 17 possible sky positions to use as objects from a possible 501. plFiberPlate : 46 possible sky positions to use as objects from a possible 500. plFiberPlate : 27 possible sky positions to use as objects from a possible 499. plFiberPlate : 11 possible sky positions to use as objects from a possible 498. plFiberPlate : 12 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 4 possible sky positions to use as objects from a possible 495. plFiberPlate : 11 possible sky positions to use as objects from a possible 494. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1509.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1510.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1510.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1511.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 120 2 11 78 3 9 58 4 16 87 5 12 115 6 10 69 7 7 65 8 12 94 9 18 86 10 19 107 11 14 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 449 6 plFiberPlate : adding spectro-photo std with objId = 94 4 3 455 44 plFiberPlate : adding spectro-photo std with objId = 94 4 3 444 50 plFiberPlate : adding spectro-photo std with objId = 94 4 5 456 33 plFiberPlate : adding spectro-photo std with objId = 125 4 5 363 45 plFiberPlate : adding spectro-photo std with objId = 125 4 2 348 18 plFiberPlate : adding spectro-photo std with objId = 125 4 4 355 45 plFiberPlate : adding spectro-photo std with objId = 125 4 6 349 64 plFiberPlate : 99 possible sky positions to use as objects from a possible 501. plFiberPlate : 55 possible sky positions to use as objects from a possible 500. plFiberPlate : 42 possible sky positions to use as objects from a possible 499. plFiberPlate : 31 possible sky positions to use as objects from a possible 498. plFiberPlate : 21 possible sky positions to use as objects from a possible 497. plFiberPlate : 19 possible sky positions to use as objects from a possible 496. plFiberPlate : 70 possible sky positions to use as objects from a possible 495. plFiberPlate : 75 possible sky positions to use as objects from a possible 494. plFiberPlate : 35 possible sky positions to use as objects from a possible 493. plFiberPlate : 23 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 12 possible sky positions to use as objects from a possible 489. plFiberPlate : 11 possible sky positions to use as objects from a possible 488. plFiberPlate : 29 possible sky positions to use as objects from a possible 487. plFiberPlate : 24 possible sky positions to use as objects from a possible 486. plFiberPlate : 88 possible sky positions to use as objects from a possible 485. plFiberPlate : 50 possible sky positions to use as objects from a possible 484. plFiberPlate : 42 possible sky positions to use as objects from a possible 483. plFiberPlate : 17 possible sky positions to use as objects from a possible 482. plFiberPlate : 7 possible sky positions to use as objects from a possible 481. plFiberPlate : 13 possible sky positions to use as objects from a possible 480. plFiberPlate : 14 possible sky positions to use as objects from a possible 479. plFiberPlate : 32 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : 35 possible sky positions to use as objects from a possible 476. plFiberPlate : 26 possible sky positions to use as objects from a possible 475. plFiberPlate : 22 possible sky positions to use as objects from a possible 474. plFiberPlate : 20 possible sky positions to use as objects from a possible 473. plFiberPlate : 7 possible sky positions to use as objects from a possible 472. plFiberPlate : 8 possible sky positions to use as objects from a possible 471. plFiberPlate : 17 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1510.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1511.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1511.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1512.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 119 2 8 71 3 7 81 4 16 119 5 21 111 6 8 68 7 10 64 8 19 94 9 18 95 10 16 147 11 11 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 365 82 plFiberPlate : adding spectro-photo std with objId = 94 4 1 460 14 plFiberPlate : adding spectro-photo std with objId = 94 4 5 460 11 plFiberPlate : adding spectro-photo std with objId = 125 4 5 363 45 plFiberPlate : adding spectro-photo std with objId = 94 4 5 457 32 plFiberPlate : adding spectro-photo std with objId = 94 4 4 463 59 plFiberPlate : adding spectro-photo std with objId = 94 4 3 456 31 plFiberPlate : adding spectro-photo std with objId = 125 4 3 370 18 plFiberPlate : 127 possible sky positions to use as objects from a possible 538. plFiberPlate : 81 possible sky positions to use as objects from a possible 537. plFiberPlate : 49 possible sky positions to use as objects from a possible 536. plFiberPlate : 28 possible sky positions to use as objects from a possible 535. plFiberPlate : 26 possible sky positions to use as objects from a possible 534. plFiberPlate : 19 possible sky positions to use as objects from a possible 533. plFiberPlate : 46 possible sky positions to use as objects from a possible 532. plFiberPlate : 94 possible sky positions to use as objects from a possible 531. plFiberPlate : 49 possible sky positions to use as objects from a possible 530. plFiberPlate : 28 possible sky positions to use as objects from a possible 529. plFiberPlate : 17 possible sky positions to use as objects from a possible 528. plFiberPlate : 11 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 24 possible sky positions to use as objects from a possible 524. plFiberPlate : 27 possible sky positions to use as objects from a possible 523. plFiberPlate : 79 possible sky positions to use as objects from a possible 522. plFiberPlate : 42 possible sky positions to use as objects from a possible 521. plFiberPlate : 24 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 9 possible sky positions to use as objects from a possible 518. plFiberPlate : 10 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 26 possible sky positions to use as objects from a possible 515. plFiberPlate : 14 possible sky positions to use as objects from a possible 514. plFiberPlate : 42 possible sky positions to use as objects from a possible 513. plFiberPlate : 20 possible sky positions to use as objects from a possible 512. plFiberPlate : 11 possible sky positions to use as objects from a possible 511. plFiberPlate : 6 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 14 possible sky positions to use as objects from a possible 508. plFiberPlate : 9 possible sky positions to use as objects from a possible 507. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1511.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1512.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1512.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1513.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 114 2 6 65 3 5 74 4 12 116 5 12 96 6 9 53 7 8 59 8 11 99 9 15 89 10 12 145 11 13 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 6 470 85 plFiberPlate : adding spectro-photo std with objId = 94 4 1 467 59 plFiberPlate : adding spectro-photo std with objId = 125 4 5 379 60 plFiberPlate : adding spectro-photo std with objId = 125 4 1 385 6 plFiberPlate : adding spectro-photo std with objId = 94 4 6 473 17 plFiberPlate : adding spectro-photo std with objId = 125 4 4 371 89 plFiberPlate : adding spectro-photo std with objId = 94 4 5 481 22 plFiberPlate : adding spectro-photo std with objId = 125 4 2 372 56 plFiberPlate : 114 possible sky positions to use as objects from a possible 508. plFiberPlate : 55 possible sky positions to use as objects from a possible 507. plFiberPlate : 30 possible sky positions to use as objects from a possible 506. plFiberPlate : 27 possible sky positions to use as objects from a possible 505. plFiberPlate : 21 possible sky positions to use as objects from a possible 504. plFiberPlate : 23 possible sky positions to use as objects from a possible 503. plFiberPlate : 34 possible sky positions to use as objects from a possible 502. plFiberPlate : 97 possible sky positions to use as objects from a possible 501. plFiberPlate : 73 possible sky positions to use as objects from a possible 500. plFiberPlate : 45 possible sky positions to use as objects from a possible 499. plFiberPlate : 26 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 15 possible sky positions to use as objects from a possible 496. plFiberPlate : 10 possible sky positions to use as objects from a possible 495. plFiberPlate : 37 possible sky positions to use as objects from a possible 494. plFiberPlate : 23 possible sky positions to use as objects from a possible 493. plFiberPlate : 65 possible sky positions to use as objects from a possible 492. plFiberPlate : 61 possible sky positions to use as objects from a possible 491. plFiberPlate : 37 possible sky positions to use as objects from a possible 490. plFiberPlate : 21 possible sky positions to use as objects from a possible 489. plFiberPlate : 12 possible sky positions to use as objects from a possible 488. plFiberPlate : 9 possible sky positions to use as objects from a possible 487. plFiberPlate : 9 possible sky positions to use as objects from a possible 486. plFiberPlate : 37 possible sky positions to use as objects from a possible 485. plFiberPlate : 17 possible sky positions to use as objects from a possible 484. plFiberPlate : 16 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 8 possible sky positions to use as objects from a possible 480. plFiberPlate : 3 possible sky positions to use as objects from a possible 479. plFiberPlate : 12 possible sky positions to use as objects from a possible 478. plFiberPlate : 7 possible sky positions to use as objects from a possible 477. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1512.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1513.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1513.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1514.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 105 2 10 71 3 8 61 4 16 87 5 11 99 6 7 55 7 9 81 8 20 114 9 11 100 10 13 113 11 18 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 2 391 2 plFiberPlate : adding spectro-photo std with objId = 125 4 3 388 59 plFiberPlate : adding spectro-photo std with objId = 94 4 4 480 28 plFiberPlate : adding spectro-photo std with objId = 125 4 6 391 78 plFiberPlate : adding spectro-photo std with objId = 94 4 1 486 9 plFiberPlate : adding spectro-photo std with objId = 125 4 6 400 69 plFiberPlate : adding spectro-photo std with objId = 94 4 4 483 13 plFiberPlate : adding spectro-photo std with objId = 94 4 3 482 33 plFiberPlate : 93 possible sky positions to use as objects from a possible 479. plFiberPlate : 40 possible sky positions to use as objects from a possible 478. plFiberPlate : 26 possible sky positions to use as objects from a possible 477. plFiberPlate : 25 possible sky positions to use as objects from a possible 476. plFiberPlate : 17 possible sky positions to use as objects from a possible 475. plFiberPlate : 25 possible sky positions to use as objects from a possible 474. plFiberPlate : 23 possible sky positions to use as objects from a possible 473. plFiberPlate : 63 possible sky positions to use as objects from a possible 472. plFiberPlate : 49 possible sky positions to use as objects from a possible 471. plFiberPlate : 21 possible sky positions to use as objects from a possible 470. plFiberPlate : 10 possible sky positions to use as objects from a possible 469. plFiberPlate : 2 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 20 possible sky positions to use as objects from a possible 465. plFiberPlate : 26 possible sky positions to use as objects from a possible 464. plFiberPlate : 66 possible sky positions to use as objects from a possible 463. plFiberPlate : 39 possible sky positions to use as objects from a possible 462. plFiberPlate : 18 possible sky positions to use as objects from a possible 461. plFiberPlate : 15 possible sky positions to use as objects from a possible 460. plFiberPlate : 4 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 11 possible sky positions to use as objects from a possible 457. plFiberPlate : 28 possible sky positions to use as objects from a possible 456. plFiberPlate : 17 possible sky positions to use as objects from a possible 455. plFiberPlate : 34 possible sky positions to use as objects from a possible 454. plFiberPlate : 23 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 7 possible sky positions to use as objects from a possible 451. plFiberPlate : 14 possible sky positions to use as objects from a possible 450. plFiberPlate : 20 possible sky positions to use as objects from a possible 449. plFiberPlate : 17 possible sky positions to use as objects from a possible 448. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1513.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1514.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1514.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1515.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 110 2 9 74 3 14 70 4 22 97 5 17 112 6 14 63 7 9 61 8 9 102 9 16 85 10 28 128 11 14 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 1 409 13 plFiberPlate : adding spectro-photo std with objId = 94 4 4 508 14 plFiberPlate : adding spectro-photo std with objId = 94 4 4 504 102 plFiberPlate : adding spectro-photo std with objId = 125 4 2 406 53 plFiberPlate : adding spectro-photo std with objId = 94 4 6 498 131 plFiberPlate : adding spectro-photo std with objId = 94 4 5 494 35 plFiberPlate : adding spectro-photo std with objId = 94 4 3 503 31 plFiberPlate : adding spectro-photo std with objId = 125 4 3 413 49 plFiberPlate : 111 possible sky positions to use as objects from a possible 493. plFiberPlate : 56 possible sky positions to use as objects from a possible 492. plFiberPlate : 25 possible sky positions to use as objects from a possible 491. plFiberPlate : 27 possible sky positions to use as objects from a possible 490. plFiberPlate : 20 possible sky positions to use as objects from a possible 489. plFiberPlate : 26 possible sky positions to use as objects from a possible 488. plFiberPlate : 45 possible sky positions to use as objects from a possible 487. plFiberPlate : 70 possible sky positions to use as objects from a possible 486. plFiberPlate : 53 possible sky positions to use as objects from a possible 485. plFiberPlate : 31 possible sky positions to use as objects from a possible 484. plFiberPlate : 14 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 15 possible sky positions to use as objects from a possible 480. plFiberPlate : 20 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 74 possible sky positions to use as objects from a possible 477. plFiberPlate : 61 possible sky positions to use as objects from a possible 476. plFiberPlate : 28 possible sky positions to use as objects from a possible 475. plFiberPlate : 17 possible sky positions to use as objects from a possible 474. plFiberPlate : 9 possible sky positions to use as objects from a possible 473. plFiberPlate : 3 possible sky positions to use as objects from a possible 472. plFiberPlate : 19 possible sky positions to use as objects from a possible 471. plFiberPlate : 17 possible sky positions to use as objects from a possible 470. plFiberPlate : 15 possible sky positions to use as objects from a possible 469. plFiberPlate : 35 possible sky positions to use as objects from a possible 468. plFiberPlate : 21 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 6 possible sky positions to use as objects from a possible 464. plFiberPlate : 13 possible sky positions to use as objects from a possible 463. plFiberPlate : 17 possible sky positions to use as objects from a possible 462. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1514.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1515.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1515.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1516.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 114 2 12 65 3 13 74 4 21 111 5 15 126 6 13 74 7 6 73 8 11 122 9 12 104 10 19 138 11 10 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 125 4 1 420 43 plFiberPlate : adding spectro-photo std with objId = 94 4 1 508 13 plFiberPlate : adding spectro-photo std with objId = 125 4 4 415 12 plFiberPlate : adding spectro-photo std with objId = 125 4 2 413 10 plFiberPlate : adding spectro-photo std with objId = 125 4 4 425 76 plFiberPlate : adding spectro-photo std with objId = 94 4 6 518 8 plFiberPlate : adding spectro-photo std with objId = 94 4 3 516 59 plFiberPlate : adding spectro-photo std with objId = 94 4 5 506 51 plFiberPlate : 121 possible sky positions to use as objects from a possible 558. plFiberPlate : 71 possible sky positions to use as objects from a possible 557. plFiberPlate : 39 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 26 possible sky positions to use as objects from a possible 554. plFiberPlate : 30 possible sky positions to use as objects from a possible 553. plFiberPlate : 53 possible sky positions to use as objects from a possible 552. plFiberPlate : 82 possible sky positions to use as objects from a possible 551. plFiberPlate : 55 possible sky positions to use as objects from a possible 550. plFiberPlate : 24 possible sky positions to use as objects from a possible 549. plFiberPlate : 15 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 6 possible sky positions to use as objects from a possible 546. plFiberPlate : 15 possible sky positions to use as objects from a possible 545. plFiberPlate : 21 possible sky positions to use as objects from a possible 544. plFiberPlate : 23 possible sky positions to use as objects from a possible 543. plFiberPlate : 82 possible sky positions to use as objects from a possible 542. plFiberPlate : 63 possible sky positions to use as objects from a possible 541. plFiberPlate : 36 possible sky positions to use as objects from a possible 540. plFiberPlate : 20 possible sky positions to use as objects from a possible 539. plFiberPlate : 15 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : 20 possible sky positions to use as objects from a possible 535. plFiberPlate : 40 possible sky positions to use as objects from a possible 534. plFiberPlate : 42 possible sky positions to use as objects from a possible 533. plFiberPlate : 29 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 11 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1515.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1516.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1516.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1517.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 110 2 11 73 3 6 66 4 10 101 5 17 123 6 10 64 7 10 57 8 14 97 9 12 86 10 20 135 11 16 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 4 534 52 plFiberPlate : adding spectro-photo std with objId = 94 4 4 524 50 plFiberPlate : adding spectro-photo std with objId = 94 4 6 528 59 plFiberPlate : adding spectro-photo std with objId = 125 4 2 426 86 plFiberPlate : adding spectro-photo std with objId = 94 4 2 528 52 plFiberPlate : adding spectro-photo std with objId = 94 4 3 530 61 plFiberPlate : adding spectro-photo std with objId = 94 4 6 526 10 plFiberPlate : adding spectro-photo std with objId = 94 4 1 522 79 plFiberPlate : 89 possible sky positions to use as objects from a possible 509. plFiberPlate : 58 possible sky positions to use as objects from a possible 508. plFiberPlate : 33 possible sky positions to use as objects from a possible 507. plFiberPlate : 18 possible sky positions to use as objects from a possible 506. plFiberPlate : 31 possible sky positions to use as objects from a possible 505. plFiberPlate : 27 possible sky positions to use as objects from a possible 504. plFiberPlate : 48 possible sky positions to use as objects from a possible 503. plFiberPlate : 78 possible sky positions to use as objects from a possible 502. plFiberPlate : 67 possible sky positions to use as objects from a possible 501. plFiberPlate : 46 possible sky positions to use as objects from a possible 500. plFiberPlate : 18 possible sky positions to use as objects from a possible 499. plFiberPlate : 12 possible sky positions to use as objects from a possible 498. plFiberPlate : 17 possible sky positions to use as objects from a possible 497. plFiberPlate : 21 possible sky positions to use as objects from a possible 496. plFiberPlate : 22 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 66 possible sky positions to use as objects from a possible 493. plFiberPlate : 45 possible sky positions to use as objects from a possible 492. plFiberPlate : 25 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 13 possible sky positions to use as objects from a possible 489. plFiberPlate : 8 possible sky positions to use as objects from a possible 488. plFiberPlate : 13 possible sky positions to use as objects from a possible 487. plFiberPlate : 11 possible sky positions to use as objects from a possible 486. plFiberPlate : 20 possible sky positions to use as objects from a possible 485. plFiberPlate : 37 possible sky positions to use as objects from a possible 484. plFiberPlate : 31 possible sky positions to use as objects from a possible 483. plFiberPlate : 19 possible sky positions to use as objects from a possible 482. plFiberPlate : 10 possible sky positions to use as objects from a possible 481. plFiberPlate : 13 possible sky positions to use as objects from a possible 480. plFiberPlate : 9 possible sky positions to use as objects from a possible 479. plFiberPlate : 12 possible sky positions to use as objects from a possible 478. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1516.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1517.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1517.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1518.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 65 2 19 64 3 14 69 4 15 96 5 14 94 6 8 66 7 6 64 8 4 54 9 15 101 10 21 127 11 18 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 4 534 58 plFiberPlate : adding spectro-photo std with objId = 94 4 3 532 12 plFiberPlate : adding spectro-photo std with objId = 94 4 3 531 90 plFiberPlate : adding spectro-photo std with objId = 125 4 5 438 12 plFiberPlate : adding spectro-photo std with objId = 94 4 1 536 7 plFiberPlate : adding spectro-photo std with objId = 125 4 2 445 29 plFiberPlate : adding spectro-photo std with objId = 125 4 6 438 59 plFiberPlate : adding spectro-photo std with objId = 94 4 5 545 61 plFiberPlate : 113 possible sky positions to use as objects from a possible 418. plFiberPlate : 64 possible sky positions to use as objects from a possible 417. plFiberPlate : 45 possible sky positions to use as objects from a possible 416. plFiberPlate : 28 possible sky positions to use as objects from a possible 415. plFiberPlate : 33 possible sky positions to use as objects from a possible 414. plFiberPlate : 10 possible sky positions to use as objects from a possible 413. plFiberPlate : 23 possible sky positions to use as objects from a possible 412. plFiberPlate : 67 possible sky positions to use as objects from a possible 411. plFiberPlate : 37 possible sky positions to use as objects from a possible 410. plFiberPlate : 23 possible sky positions to use as objects from a possible 409. plFiberPlate : 12 possible sky positions to use as objects from a possible 408. plFiberPlate : 8 possible sky positions to use as objects from a possible 407. plFiberPlate : 7 possible sky positions to use as objects from a possible 406. plFiberPlate : 7 possible sky positions to use as objects from a possible 405. plFiberPlate : 12 possible sky positions to use as objects from a possible 404. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 403. plFiberPlate: No sky found for bundle at 280.607 -59.194, increase box by 80 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 403. plFiberPlate : 68 possible sky positions to use as objects from a possible 402. plFiberPlate : 46 possible sky positions to use as objects from a possible 401. plFiberPlate : 26 possible sky positions to use as objects from a possible 400. plFiberPlate : 16 possible sky positions to use as objects from a possible 399. plFiberPlate : 11 possible sky positions to use as objects from a possible 398. plFiberPlate : 6 possible sky positions to use as objects from a possible 397. plFiberPlate : 11 possible sky positions to use as objects from a possible 396. plFiberPlate : 5 possible sky positions to use as objects from a possible 395. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 120 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 279.596 74.537, increase box by 130 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 394. plFiberPlate : 30 possible sky positions to use as objects from a possible 393. plFiberPlate : 20 possible sky positions to use as objects from a possible 392. plFiberPlate : 10 possible sky positions to use as objects from a possible 391. plFiberPlate : 11 possible sky positions to use as objects from a possible 390. plFiberPlate : 11 possible sky positions to use as objects from a possible 389. plFiberPlate : 10 possible sky positions to use as objects from a possible 388. plFiberPlate : 6 possible sky positions to use as objects from a possible 387. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1517.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1518.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1518.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1519.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 106 2 15 64 3 11 64 4 14 97 5 5 106 6 7 73 7 7 60 8 13 96 9 3 91 10 26 128 11 20 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 157 146 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 51 103 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 151 129 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 154 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 148 76 plFiberPlate : adding spectro-photo std with objId = 2662 0 3 54 122 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 54 27 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : 105 possible sky positions to use as objects from a possible 502. plFiberPlate : 67 possible sky positions to use as objects from a possible 501. plFiberPlate : 30 possible sky positions to use as objects from a possible 500. plFiberPlate : 25 possible sky positions to use as objects from a possible 499. plFiberPlate : 20 possible sky positions to use as objects from a possible 498. plFiberPlate : 11 possible sky positions to use as objects from a possible 497. plFiberPlate : 52 possible sky positions to use as objects from a possible 496. plFiberPlate : 81 possible sky positions to use as objects from a possible 495. plFiberPlate : 55 possible sky positions to use as objects from a possible 494. plFiberPlate : 39 possible sky positions to use as objects from a possible 493. plFiberPlate : 15 possible sky positions to use as objects from a possible 492. plFiberPlate : 10 possible sky positions to use as objects from a possible 491. plFiberPlate : 14 possible sky positions to use as objects from a possible 490. plFiberPlate : 8 possible sky positions to use as objects from a possible 489. plFiberPlate : 22 possible sky positions to use as objects from a possible 488. plFiberPlate : 19 possible sky positions to use as objects from a possible 487. plFiberPlate : 62 possible sky positions to use as objects from a possible 486. plFiberPlate : 48 possible sky positions to use as objects from a possible 485. plFiberPlate : 28 possible sky positions to use as objects from a possible 484. plFiberPlate : 15 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 6 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 13 possible sky positions to use as objects from a possible 479. plFiberPlate : 19 possible sky positions to use as objects from a possible 478. plFiberPlate : 39 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : 9 possible sky positions to use as objects from a possible 475. plFiberPlate : 8 possible sky positions to use as objects from a possible 474. plFiberPlate : 9 possible sky positions to use as objects from a possible 473. plFiberPlate : 10 possible sky positions to use as objects from a possible 472. plFiberPlate : 8 possible sky positions to use as objects from a possible 471. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1518.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1519.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1519.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1520.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 105 2 11 72 3 6 68 4 16 91 5 7 96 6 5 61 7 6 57 8 5 90 9 3 71 10 16 119 11 12 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2662 0 3 42 46 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 141 37 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 148 40 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 137 177 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 87 possible sky positions to use as objects from a possible 469. plFiberPlate : 62 possible sky positions to use as objects from a possible 468. plFiberPlate : 19 possible sky positions to use as objects from a possible 467. plFiberPlate : 20 possible sky positions to use as objects from a possible 466. plFiberPlate : 34 possible sky positions to use as objects from a possible 465. plFiberPlate : 26 possible sky positions to use as objects from a possible 464. plFiberPlate : 40 possible sky positions to use as objects from a possible 463. plFiberPlate : 69 possible sky positions to use as objects from a possible 462. plFiberPlate : 46 possible sky positions to use as objects from a possible 461. plFiberPlate : 31 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 11 possible sky positions to use as objects from a possible 458. plFiberPlate : 12 possible sky positions to use as objects from a possible 457. plFiberPlate : 18 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 26 possible sky positions to use as objects from a possible 454. plFiberPlate : 56 possible sky positions to use as objects from a possible 453. plFiberPlate : 41 possible sky positions to use as objects from a possible 452. plFiberPlate : 27 possible sky positions to use as objects from a possible 451. plFiberPlate : 14 possible sky positions to use as objects from a possible 450. plFiberPlate : 4 possible sky positions to use as objects from a possible 449. plFiberPlate : 13 possible sky positions to use as objects from a possible 448. plFiberPlate : 7 possible sky positions to use as objects from a possible 447. plFiberPlate : 20 possible sky positions to use as objects from a possible 446. plFiberPlate : 22 possible sky positions to use as objects from a possible 445. plFiberPlate : 31 possible sky positions to use as objects from a possible 444. plFiberPlate : 23 possible sky positions to use as objects from a possible 443. plFiberPlate : 13 possible sky positions to use as objects from a possible 442. plFiberPlate : 11 possible sky positions to use as objects from a possible 441. plFiberPlate : 6 possible sky positions to use as objects from a possible 440. plFiberPlate : 2 possible sky positions to use as objects from a possible 439. plFiberPlate : 20 possible sky positions to use as objects from a possible 438. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1519.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1520.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1520.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1521.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 102 2 15 75 3 10 83 4 19 93 5 5 90 6 5 40 7 6 43 8 6 73 9 4 66 10 20 119 11 18 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 28 27 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 123 71 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 26 134 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 127 55 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 102 possible sky positions to use as objects from a possible 425. plFiberPlate : 74 possible sky positions to use as objects from a possible 424. plFiberPlate : 47 possible sky positions to use as objects from a possible 423. plFiberPlate : 16 possible sky positions to use as objects from a possible 422. plFiberPlate : 13 possible sky positions to use as objects from a possible 421. plFiberPlate : 29 possible sky positions to use as objects from a possible 420. plFiberPlate : 48 possible sky positions to use as objects from a possible 419. plFiberPlate : 46 possible sky positions to use as objects from a possible 418. plFiberPlate : 39 possible sky positions to use as objects from a possible 417. plFiberPlate : 30 possible sky positions to use as objects from a possible 416. plFiberPlate : 7 possible sky positions to use as objects from a possible 415. plFiberPlate : 3 possible sky positions to use as objects from a possible 414. plFiberPlate : 4 possible sky positions to use as objects from a possible 413. plFiberPlate : 25 possible sky positions to use as objects from a possible 412. plFiberPlate : 13 possible sky positions to use as objects from a possible 411. plFiberPlate : 20 possible sky positions to use as objects from a possible 410. plFiberPlate : 59 possible sky positions to use as objects from a possible 409. plFiberPlate : 35 possible sky positions to use as objects from a possible 408. plFiberPlate : 25 possible sky positions to use as objects from a possible 407. plFiberPlate : 11 possible sky positions to use as objects from a possible 406. plFiberPlate : 5 possible sky positions to use as objects from a possible 405. plFiberPlate : 5 possible sky positions to use as objects from a possible 404. plFiberPlate : 11 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 9 possible sky positions to use as objects from a possible 401. plFiberPlate : 25 possible sky positions to use as objects from a possible 400. plFiberPlate : 12 possible sky positions to use as objects from a possible 399. plFiberPlate : 7 possible sky positions to use as objects from a possible 398. plFiberPlate : 7 possible sky positions to use as objects from a possible 397. plFiberPlate : 5 possible sky positions to use as objects from a possible 396. plFiberPlate : 11 possible sky positions to use as objects from a possible 395. plFiberPlate : 12 possible sky positions to use as objects from a possible 394. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1520.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1521.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1521.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1522.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 97 2 21 51 3 12 54 4 19 83 5 4 95 6 6 54 7 7 43 8 5 84 9 6 76 10 30 115 11 27 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 124 121 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 19 28 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 121 90 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 26 134 plFiberPlate : adding spectro-photo std with objId = 2659 0 5 128 35 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 112 122 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : 102 possible sky positions to use as objects from a possible 429. plFiberPlate : 61 possible sky positions to use as objects from a possible 428. plFiberPlate : 40 possible sky positions to use as objects from a possible 427. plFiberPlate : 25 possible sky positions to use as objects from a possible 426. plFiberPlate : 18 possible sky positions to use as objects from a possible 425. plFiberPlate : 28 possible sky positions to use as objects from a possible 424. plFiberPlate : 35 possible sky positions to use as objects from a possible 423. plFiberPlate : 65 possible sky positions to use as objects from a possible 422. plFiberPlate : 34 possible sky positions to use as objects from a possible 421. plFiberPlate : 23 possible sky positions to use as objects from a possible 420. plFiberPlate : 12 possible sky positions to use as objects from a possible 419. plFiberPlate : 17 possible sky positions to use as objects from a possible 418. plFiberPlate : 10 possible sky positions to use as objects from a possible 417. plFiberPlate : 10 possible sky positions to use as objects from a possible 416. plFiberPlate : 19 possible sky positions to use as objects from a possible 415. plFiberPlate : 20 possible sky positions to use as objects from a possible 414. plFiberPlate : 53 possible sky positions to use as objects from a possible 413. plFiberPlate : 40 possible sky positions to use as objects from a possible 412. plFiberPlate : 36 possible sky positions to use as objects from a possible 411. plFiberPlate : 24 possible sky positions to use as objects from a possible 410. plFiberPlate : 12 possible sky positions to use as objects from a possible 409. plFiberPlate : 5 possible sky positions to use as objects from a possible 408. plFiberPlate : 7 possible sky positions to use as objects from a possible 407. plFiberPlate : 22 possible sky positions to use as objects from a possible 406. plFiberPlate : 23 possible sky positions to use as objects from a possible 405. plFiberPlate : 36 possible sky positions to use as objects from a possible 404. plFiberPlate : 24 possible sky positions to use as objects from a possible 403. plFiberPlate : 18 possible sky positions to use as objects from a possible 402. plFiberPlate : 7 possible sky positions to use as objects from a possible 401. plFiberPlate : 7 possible sky positions to use as objects from a possible 400. plFiberPlate : 1 possible sky positions to use as objects from a possible 399. plFiberPlate : 16 possible sky positions to use as objects from a possible 398. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1521.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1522.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1522.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1523.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 88 2 15 53 3 12 52 4 17 73 5 3 67 6 5 53 7 3 55 8 3 77 9 3 73 10 24 95 11 24 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 114 188 plFiberPlate : adding spectro-photo std with objId = 2659 0 6 112 30 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 108 116 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : 95 possible sky positions to use as objects from a possible 386. plFiberPlate : 48 possible sky positions to use as objects from a possible 385. plFiberPlate : 32 possible sky positions to use as objects from a possible 384. plFiberPlate : 10 possible sky positions to use as objects from a possible 383. plFiberPlate : 20 possible sky positions to use as objects from a possible 382. plFiberPlate : 22 possible sky positions to use as objects from a possible 381. plFiberPlate : 38 possible sky positions to use as objects from a possible 380. plFiberPlate : 67 possible sky positions to use as objects from a possible 379. plFiberPlate : 54 possible sky positions to use as objects from a possible 378. plFiberPlate : 40 possible sky positions to use as objects from a possible 377. plFiberPlate : 19 possible sky positions to use as objects from a possible 376. plFiberPlate : 11 possible sky positions to use as objects from a possible 375. plFiberPlate : 7 possible sky positions to use as objects from a possible 374. plFiberPlate : 14 possible sky positions to use as objects from a possible 373. plFiberPlate : 22 possible sky positions to use as objects from a possible 372. plFiberPlate : 18 possible sky positions to use as objects from a possible 371. plFiberPlate : 27 possible sky positions to use as objects from a possible 370. plFiberPlate : 20 possible sky positions to use as objects from a possible 369. plFiberPlate : 15 possible sky positions to use as objects from a possible 368. plFiberPlate : 8 possible sky positions to use as objects from a possible 367. plFiberPlate : 7 possible sky positions to use as objects from a possible 366. plFiberPlate : 7 possible sky positions to use as objects from a possible 365. plFiberPlate : 8 possible sky positions to use as objects from a possible 364. plFiberPlate : 18 possible sky positions to use as objects from a possible 363. plFiberPlate : 15 possible sky positions to use as objects from a possible 362. plFiberPlate : 38 possible sky positions to use as objects from a possible 361. plFiberPlate : 14 possible sky positions to use as objects from a possible 360. plFiberPlate : 13 possible sky positions to use as objects from a possible 359. plFiberPlate : 7 possible sky positions to use as objects from a possible 358. plFiberPlate : 5 possible sky positions to use as objects from a possible 357. plFiberPlate : 12 possible sky positions to use as objects from a possible 356. plFiberPlate : 13 possible sky positions to use as objects from a possible 355. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1522.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1523.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1523.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1524.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 87 2 13 55 3 6 51 4 12 85 5 2 73 6 7 56 7 6 54 8 1 72 9 7 79 10 16 98 11 16 71 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 98 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 87 89 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 100 81 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 109 8 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : 87 possible sky positions to use as objects from a possible 379. plFiberPlate : 61 possible sky positions to use as objects from a possible 378. plFiberPlate : 22 possible sky positions to use as objects from a possible 377. plFiberPlate : 7 possible sky positions to use as objects from a possible 376. plFiberPlate : 18 possible sky positions to use as objects from a possible 375. plFiberPlate : 28 possible sky positions to use as objects from a possible 374. plFiberPlate : 30 possible sky positions to use as objects from a possible 373. plFiberPlate : 67 possible sky positions to use as objects from a possible 372. plFiberPlate : 39 possible sky positions to use as objects from a possible 371. plFiberPlate : 21 possible sky positions to use as objects from a possible 370. plFiberPlate : 9 possible sky positions to use as objects from a possible 369. plFiberPlate : 4 possible sky positions to use as objects from a possible 368. plFiberPlate : 9 possible sky positions to use as objects from a possible 367. plFiberPlate : 9 possible sky positions to use as objects from a possible 366. plFiberPlate : 11 possible sky positions to use as objects from a possible 365. plFiberPlate : 19 possible sky positions to use as objects from a possible 364. plFiberPlate : 49 possible sky positions to use as objects from a possible 363. plFiberPlate : 40 possible sky positions to use as objects from a possible 362. plFiberPlate : 24 possible sky positions to use as objects from a possible 361. plFiberPlate : 12 possible sky positions to use as objects from a possible 360. plFiberPlate : 4 possible sky positions to use as objects from a possible 359. plFiberPlate : 3 possible sky positions to use as objects from a possible 358. plFiberPlate : 10 possible sky positions to use as objects from a possible 357. plFiberPlate : 20 possible sky positions to use as objects from a possible 356. plFiberPlate : 9 possible sky positions to use as objects from a possible 355. plFiberPlate : 25 possible sky positions to use as objects from a possible 354. plFiberPlate : 14 possible sky positions to use as objects from a possible 353. plFiberPlate : 13 possible sky positions to use as objects from a possible 352. plFiberPlate : 10 possible sky positions to use as objects from a possible 351. plFiberPlate : 8 possible sky positions to use as objects from a possible 350. plFiberPlate : 7 possible sky positions to use as objects from a possible 349. plFiberPlate : 11 possible sky positions to use as objects from a possible 348. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1523.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1524.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1524.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1525.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 91 2 9 60 3 19 49 4 22 51 5 6 53 6 9 29 7 9 35 8 6 59 9 4 39 10 24 92 11 16 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 97 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 82 141 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 97 164 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 100 81 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 82 203 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 83 214 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 64 possible sky positions to use as objects from a possible 312. plFiberPlate : 45 possible sky positions to use as objects from a possible 311. plFiberPlate : 25 possible sky positions to use as objects from a possible 310. plFiberPlate : 13 possible sky positions to use as objects from a possible 309. plFiberPlate : 16 possible sky positions to use as objects from a possible 308. plFiberPlate : 20 possible sky positions to use as objects from a possible 307. plFiberPlate : 40 possible sky positions to use as objects from a possible 306. plFiberPlate : 38 possible sky positions to use as objects from a possible 305. plFiberPlate : 33 possible sky positions to use as objects from a possible 304. plFiberPlate : 17 possible sky positions to use as objects from a possible 303. plFiberPlate : 12 possible sky positions to use as objects from a possible 302. plFiberPlate : 3 possible sky positions to use as objects from a possible 301. plFiberPlate : 6 possible sky positions to use as objects from a possible 300. plFiberPlate : 13 possible sky positions to use as objects from a possible 299. plFiberPlate : 19 possible sky positions to use as objects from a possible 298. plFiberPlate : 17 possible sky positions to use as objects from a possible 297. plFiberPlate : 35 possible sky positions to use as objects from a possible 296. plFiberPlate : 25 possible sky positions to use as objects from a possible 295. plFiberPlate : 16 possible sky positions to use as objects from a possible 294. plFiberPlate : 9 possible sky positions to use as objects from a possible 293. plFiberPlate : 2 possible sky positions to use as objects from a possible 292. plFiberPlate : 7 possible sky positions to use as objects from a possible 291. plFiberPlate : 6 possible sky positions to use as objects from a possible 290. plFiberPlate : 14 possible sky positions to use as objects from a possible 289. plFiberPlate : 12 possible sky positions to use as objects from a possible 288. plFiberPlate : 13 possible sky positions to use as objects from a possible 287. plFiberPlate : 7 possible sky positions to use as objects from a possible 286. plFiberPlate : 2 possible sky positions to use as objects from a possible 285. plFiberPlate : 2 possible sky positions to use as objects from a possible 284. plFiberPlate : 9 possible sky positions to use as objects from a possible 283. plFiberPlate : 2 possible sky positions to use as objects from a possible 282. plFiberPlate : 9 possible sky positions to use as objects from a possible 281. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1524.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1525.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1525.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1526.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 63 2 19 40 3 12 35 4 16 41 5 4 48 6 7 35 7 5 30 8 2 61 9 4 54 10 18 68 11 17 55 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 75 253 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 68 145 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 80 150 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 77 91 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 81 290 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 62 193 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 48 possible sky positions to use as objects from a possible 266. plFiberPlate : 35 possible sky positions to use as objects from a possible 265. plFiberPlate : 16 possible sky positions to use as objects from a possible 264. plFiberPlate : 12 possible sky positions to use as objects from a possible 263. plFiberPlate : 9 possible sky positions to use as objects from a possible 262. plFiberPlate : 24 possible sky positions to use as objects from a possible 261. plFiberPlate : 21 possible sky positions to use as objects from a possible 260. plFiberPlate : 31 possible sky positions to use as objects from a possible 259. plFiberPlate : 29 possible sky positions to use as objects from a possible 258. plFiberPlate : 21 possible sky positions to use as objects from a possible 257. plFiberPlate : 12 possible sky positions to use as objects from a possible 256. plFiberPlate : 7 possible sky positions to use as objects from a possible 255. plFiberPlate : 5 possible sky positions to use as objects from a possible 254. plFiberPlate : 17 possible sky positions to use as objects from a possible 253. plFiberPlate : 8 possible sky positions to use as objects from a possible 252. plFiberPlate : 9 possible sky positions to use as objects from a possible 251. plFiberPlate : 36 possible sky positions to use as objects from a possible 250. plFiberPlate : 30 possible sky positions to use as objects from a possible 249. plFiberPlate : 16 possible sky positions to use as objects from a possible 248. plFiberPlate : 12 possible sky positions to use as objects from a possible 247. plFiberPlate : 4 possible sky positions to use as objects from a possible 246. plFiberPlate : 13 possible sky positions to use as objects from a possible 245. plFiberPlate : 8 possible sky positions to use as objects from a possible 244. plFiberPlate : 11 possible sky positions to use as objects from a possible 243. plFiberPlate : 11 possible sky positions to use as objects from a possible 242. plFiberPlate : 24 possible sky positions to use as objects from a possible 241. plFiberPlate : 14 possible sky positions to use as objects from a possible 240. plFiberPlate : 11 possible sky positions to use as objects from a possible 239. plFiberPlate : 2 possible sky positions to use as objects from a possible 238. plFiberPlate : 4 possible sky positions to use as objects from a possible 237. plFiberPlate : 9 possible sky positions to use as objects from a possible 236. plFiberPlate : 8 possible sky positions to use as objects from a possible 235. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1525.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1526.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1526.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1527.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 41 2 16 26 3 13 27 4 17 42 5 7 40 6 8 29 7 10 36 8 5 47 9 5 41 10 28 52 11 21 33 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 72 187 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 69 311 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 61 343 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 72 72 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 56 125 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 54 24 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 62 193 plFiberPlate : 45 possible sky positions to use as objects from a possible 201. plFiberPlate : 25 possible sky positions to use as objects from a possible 200. plFiberPlate : 14 possible sky positions to use as objects from a possible 199. plFiberPlate : 6 possible sky positions to use as objects from a possible 198. plFiberPlate : 6 possible sky positions to use as objects from a possible 197. plFiberPlate : 10 possible sky positions to use as objects from a possible 196. plFiberPlate : 19 possible sky positions to use as objects from a possible 195. plFiberPlate : 35 possible sky positions to use as objects from a possible 194. plFiberPlate : 29 possible sky positions to use as objects from a possible 193. plFiberPlate : 15 possible sky positions to use as objects from a possible 192. plFiberPlate : 7 possible sky positions to use as objects from a possible 191. plFiberPlate : 3 possible sky positions to use as objects from a possible 190. plFiberPlate : 1 possible sky positions to use as objects from a possible 189. plFiberPlate : 10 possible sky positions to use as objects from a possible 188. plFiberPlate : 7 possible sky positions to use as objects from a possible 187. plFiberPlate : 4 possible sky positions to use as objects from a possible 186. plFiberPlate : 20 possible sky positions to use as objects from a possible 185. plFiberPlate : 17 possible sky positions to use as objects from a possible 184. plFiberPlate : 11 possible sky positions to use as objects from a possible 183. plFiberPlate : 6 possible sky positions to use as objects from a possible 182. plFiberPlate : 1 possible sky positions to use as objects from a possible 181. plFiberPlate : 0 possible sky positions to use as objects from a possible 180. plFiberPlate: No sky found for bundle at -2.112 68.124, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 180. plFiberPlate : 5 possible sky positions to use as objects from a possible 179. plFiberPlate : 16 possible sky positions to use as objects from a possible 178. plFiberPlate : 6 possible sky positions to use as objects from a possible 177. plFiberPlate : 16 possible sky positions to use as objects from a possible 176. plFiberPlate : 16 possible sky positions to use as objects from a possible 175. plFiberPlate : 9 possible sky positions to use as objects from a possible 174. plFiberPlate : 3 possible sky positions to use as objects from a possible 173. plFiberPlate : 3 possible sky positions to use as objects from a possible 172. plFiberPlate : 5 possible sky positions to use as objects from a possible 171. plFiberPlate : 13 possible sky positions to use as objects from a possible 170. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1526.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1527.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1527.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1528.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 50 2 16 25 3 10 14 4 9 8 5 2 9 6 4 13 7 6 23 8 4 39 9 2 22 10 22 32 11 23 38 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 60 209 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 50 249 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 44 161 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 50 376 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 56 91 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 43 290 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 56 125 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 54 24 plFiberPlate : 15 possible sky positions to use as objects from a possible 125. plFiberPlate : 11 possible sky positions to use as objects from a possible 124. plFiberPlate : 8 possible sky positions to use as objects from a possible 123. plFiberPlate : 8 possible sky positions to use as objects from a possible 122. plFiberPlate : 9 possible sky positions to use as objects from a possible 121. plFiberPlate : 11 possible sky positions to use as objects from a possible 120. plFiberPlate : 20 possible sky positions to use as objects from a possible 119. plFiberPlate : 5 possible sky positions to use as objects from a possible 118. plFiberPlate : 2 possible sky positions to use as objects from a possible 117. plFiberPlate : 2 possible sky positions to use as objects from a possible 116. plFiberPlate : 1 possible sky positions to use as objects from a possible 115. plFiberPlate : 1 possible sky positions to use as objects from a possible 114. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 113. plFiberPlate: No sky found for bundle at 25.967 -44.695, increase box by 70 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 113. plFiberPlate : 7 possible sky positions to use as objects from a possible 112. plFiberPlate : 21 possible sky positions to use as objects from a possible 111. plFiberPlate : 7 possible sky positions to use as objects from a possible 110. plFiberPlate : 7 possible sky positions to use as objects from a possible 109. plFiberPlate : 3 possible sky positions to use as objects from a possible 108. plFiberPlate : 2 possible sky positions to use as objects from a possible 107. plFiberPlate : 3 possible sky positions to use as objects from a possible 106. plFiberPlate : 1 possible sky positions to use as objects from a possible 105. plFiberPlate : 5 possible sky positions to use as objects from a possible 104. plFiberPlate : 1 possible sky positions to use as objects from a possible 103. plFiberPlate : 6 possible sky positions to use as objects from a possible 102. plFiberPlate : 8 possible sky positions to use as objects from a possible 101. plFiberPlate : 7 possible sky positions to use as objects from a possible 100. plFiberPlate : 5 possible sky positions to use as objects from a possible 99. plFiberPlate : 3 possible sky positions to use as objects from a possible 98. plFiberPlate : 2 possible sky positions to use as objects from a possible 97. plFiberPlate : 1 possible sky positions to use as objects from a possible 96. plFiberPlate : 1 possible sky positions to use as objects from a possible 95. plFiberPlate : 10 possible sky positions to use as objects from a possible 94. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1527.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1528.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1528.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.08.2/plPlugMapP-1529.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 106 2 2 65 3 8 55 4 22 101 5 9 134 6 4 72 7 3 68 8 3 98 9 3 91 10 10 109 11 9 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 499 118 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 56 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 17 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 496 125 plFiberPlate : adding spectro-photo std with objId = 3325 20 3 497 6 plFiberPlate : adding spectro-photo std with objId = 2738 20 3 299 58 plFiberPlate : adding spectro-photo std with objId = 3325 20 4 492 42 plFiberPlate : adding spectro-photo std with objId = 2738 20 4 304 82 plFiberPlate : 84 possible sky positions to use as objects from a possible 521. plFiberPlate : 42 possible sky positions to use as objects from a possible 520. plFiberPlate : 32 possible sky positions to use as objects from a possible 519. plFiberPlate : 19 possible sky positions to use as objects from a possible 518. plFiberPlate : 21 possible sky positions to use as objects from a possible 517. plFiberPlate : 26 possible sky positions to use as objects from a possible 516. plFiberPlate : 28 possible sky positions to use as objects from a possible 515. plFiberPlate : 58 possible sky positions to use as objects from a possible 514. plFiberPlate : 36 possible sky positions to use as objects from a possible 513. plFiberPlate : 16 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 13 possible sky positions to use as objects from a possible 508. plFiberPlate : 20 possible sky positions to use as objects from a possible 507. plFiberPlate : 10 possible sky positions to use as objects from a possible 506. plFiberPlate : 85 possible sky positions to use as objects from a possible 505. plFiberPlate : 40 possible sky positions to use as objects from a possible 504. plFiberPlate : 21 possible sky positions to use as objects from a possible 503. plFiberPlate : 9 possible sky positions to use as objects from a possible 502. plFiberPlate : 15 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 13 possible sky positions to use as objects from a possible 499. plFiberPlate : 13 possible sky positions to use as objects from a possible 498. plFiberPlate : 26 possible sky positions to use as objects from a possible 497. plFiberPlate : 44 possible sky positions to use as objects from a possible 496. plFiberPlate : 20 possible sky positions to use as objects from a possible 495. plFiberPlate : 13 possible sky positions to use as objects from a possible 494. plFiberPlate : 8 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 12 possible sky positions to use as objects from a possible 491. plFiberPlate : 11 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1528.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1529.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.08.2/plOverlay-1529.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Aug 4 10:53:35 CDT 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_31/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_31/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 57 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1473.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1473.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1473.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1474.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9568,3.8840) and (12.41,3.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1474.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1474.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1475.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3401,5.1533) and (12.20,2.74) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1475.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1475.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1476.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8216,4.8314) and (12.15,3.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1476.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1476.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1477.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1477.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1477.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1478.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1478.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1478.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1479.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1479.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1479.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1480.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.1072,6.1700) and (-11.50,5.61) plMakeFanucCodes : fixed path between (10.0007,-7.8012) and (10.98,-5.61) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1480.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1480.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1481.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3813,-4.7747) and (12.37,-2.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1481.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1481.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1482.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4693,-5.5819) and (-11.81,-3.25) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1482.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1482.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1483.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1483.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1483.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1484.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1484.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1484.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1485.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.3043,-11.1052) and (5.82,-11.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1485.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1485.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1486.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1486.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1486.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1487.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.4492,-10.2969) and (-6.01,-11.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1487.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1487.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1488.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2032,2.8175) and (-12.67,1.07) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1488.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1488.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1489.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1489.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1489.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1490.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3991,7.3439) and (11.34,5.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1490.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1490.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1491.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1491.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1491.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1492.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5041,5.4548) and (-11.92,3.87) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1492.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1492.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1493.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.0363,-10.6098) and (-6.22,-11.11) plMakeFanucCodes : fixed path between (11.0591,-6.3184) and (11.54,-4.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1493.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1493.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1494.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1494.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1494.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1495.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1495.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1495.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1496.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1496.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1496.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1497.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1497.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1497.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1498.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.0974,7.6567) and (10.89,5.86) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1498.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1498.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1499.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.5151,-6.5977) and (11.73,-4.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1499.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1499.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1500.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1500.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1500.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1501.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.6154,-10.0338) and (4.76,-11.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1501.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1501.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1502.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.0555,-8.9858) and (-10.45,-6.84) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1502.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1502.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1503.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1503.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1503.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1504.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1504.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1504.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1505.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1505.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1505.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1506.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3742,-5.6583) and (12.38,-3.05) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1506.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9862,4.3871) and (0.48,12.69) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1506.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1507.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1507.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1507.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1508.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1508.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1508.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1509.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1509.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1509.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1510.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1510.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1510.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1511.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.5253,-2.3182) and (-12.70,-1.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1511.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1511.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1512.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1512.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1512.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1513.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1513.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1513.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1514.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1514.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1514.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.2469,8.7194) and (10.74,5.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1515.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1515.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1515.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1516.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1516.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1516.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1517.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.6096,-10.2243) and (6.04,-11.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1517.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1517.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1518.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1518.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1518.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1519.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.8599,-8.1578) and (-10.33,-7.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1519.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7452,10.4926) and (-12.23,-2.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1519.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1520.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1520.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1520.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1521.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1521.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1521.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1522.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1522.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1522.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1523.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1523.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1523.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1524.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1524.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1524.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1525.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.7634,4.8032) and (-12.35,3.30) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1525.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1525.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1526.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1526.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1526.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1527.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0415,-6.4277) and (-11.34,-5.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1527.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1527.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1528.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1528.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1528.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1529.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.5607,-9.4747) and (-7.34,-10.21) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1529.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.08.2/plFanuc-1529.par plMakeFanucCodes : temperature difference 9.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00019116 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Aug 4 10:56:08 CDT 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_31/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_31/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bb3154 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 57 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1473 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1474 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1475 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1476 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1477 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1478 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1479 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1480 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1481 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1482 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1483 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1484 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1485 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1486 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1487 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1488 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1489 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1490 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1491 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1492 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1493 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1494 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1495 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1496 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1497 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1498 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1499 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1500 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1501 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1502 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1503 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1504 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1505 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1506 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1507 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1508 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1509 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1510 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1511 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1512 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1513 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1514 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1515 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1516 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1517 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1518 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1519 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1520 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1521 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1522 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1523 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1524 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1525 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1526 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1527 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1528 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1529 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 11 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Aug 4 10:56:51 CDT 2003 Begin running "plateEnder dr2003.08.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_31/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_31/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Mon Aug 4 10:58:56 CDT 2003 ALL DONE PS: Read file for stderr output of this job.