Sender: LSF System Subject: Job 98494: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Sep 3 19:20:35 2003 Results reported at Wed Sep 3 19:22:56 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_63 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.09.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 129.39 sec. Max Memory : 11 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Sep 3 19:20:36 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Sep 3 19:20:37 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_2/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v2_20/Linux:/fnal/ups/prd/ups/v4_6Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_0/Linux/bin:/sdss/ups/prd/photo/v5_4_25/Linux/bin:/sdss/ups/prd/specflat/v1_4/Linux/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_9_7/Linux/bin:/sdss/ups/prd/idlspec2d/v4_9_8/Linux/bin:/sdss/ups/prd/spectro/v5_7_7/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_63/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed Sep 3 19:20:37 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_63/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_9_8/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_9_7/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_25/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_4/Linux SPECTRO_DIR=/sdss/ups/prd/spectro/v5_7_7/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_JaZRNZ --------------------------------------------------------------- --------------------------------------------------------------- Wed Sep 3 19:20:37 CDT 2003 Begin running plate --------------------------------------------------------------- Wed Sep 3 19:20:37 CDT 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_63/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_63/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bb4d34 makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1107.par makePlates : plateInfo struct for plate 1581 : (h4).mjd 53225 (h4).raCen 235.6166 (h4).decCen 32.57425 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 235.617 32.574 235.617 34.074 plMakePlateFromTile : mjd of obs : 53225.409972 Observed HA/dec of plate center, fiducial point (deg) : -25.002 32.564 -25.002 34.063 The rotation angle of the fid. point is 82.570051 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1108.par makePlates : plateInfo struct for plate 1580 : (h4).mjd 53225 (h4).raCen 236.8661 (h4).decCen 31.89244 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 236.866 31.892 236.866 33.392 plMakePlateFromTile : mjd of obs : 53225.452229 Observed HA/dec of plate center, fiducial point (deg) : -11.002 31.882 -11.002 33.381 The rotation angle of the fid. point is 81.527380 plMakePlateFromTile : beginning loop over 1343 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1109.par makePlates : plateInfo struct for plate 1579 : (h4).mjd 53225 (h4).raCen 238.8225 (h4).decCen 30.32313 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 238.823 30.323 238.823 31.823 plMakePlateFromTile : mjd of obs : 53225.490902 Observed HA/dec of plate center, fiducial point (deg) : 0.998 30.313 0.998 31.813 The rotation angle of the fid. point is -18.781602 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1110.par makePlates : plateInfo struct for plate 1578 : (h4).mjd 53225 (h4).raCen 240.9481 (h4).decCen 29.19282 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 240.948 29.193 240.948 30.693 plMakePlateFromTile : mjd of obs : 53225.494020 Observed HA/dec of plate center, fiducial point (deg) : -0.002 29.184 -0.002 30.684 The rotation angle of the fid. point is 0.009902 plMakePlateFromTile : beginning loop over 1328 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1111.par makePlates : plateInfo struct for plate 1577 : (h4).mjd 53225 (h4).raCen 243.0382 (h4).decCen 28.18454 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.038 28.185 243.038 29.685 plMakePlateFromTile : mjd of obs : 53225.530292 Observed HA/dec of plate center, fiducial point (deg) : 10.998 28.177 10.998 29.676 The rotation angle of the fid. point is -61.395804 plMakePlateFromTile : beginning loop over 1353 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1112.par makePlates : plateInfo struct for plate 1576 : (h4).mjd 53225 (h4).raCen 244.8112 (h4).decCen 26.38709 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 244.811 26.387 244.811 27.887 plMakePlateFromTile : mjd of obs : 53225.532434 Observed HA/dec of plate center, fiducial point (deg) : 9.998 26.380 9.998 27.880 The rotation angle of the fid. point is -51.275558 plMakePlateFromTile : beginning loop over 1370 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1113.par makePlates : plateInfo struct for plate 1575 : (h4).mjd 53225 (h4).raCen 244.4916 (h4).decCen 25.55465 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 244.492 25.555 244.492 27.055 plMakePlateFromTile : mjd of obs : 53225.531550 Observed HA/dec of plate center, fiducial point (deg) : 9.998 25.548 9.998 27.048 The rotation angle of the fid. point is -48.029372 plMakePlateFromTile : beginning loop over 1326 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1114.par makePlates : plateInfo struct for plate 1574 : (h4).mjd 53225 (h4).raCen 245.81 (h4).decCen 25.03075 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 245.810 25.031 245.810 26.531 plMakePlateFromTile : mjd of obs : 53225.573996 Observed HA/dec of plate center, fiducial point (deg) : 23.998 25.025 23.998 26.525 The rotation angle of the fid. point is -64.170420 plMakePlateFromTile : beginning loop over 1384 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1115.par makePlates : plateInfo struct for plate 1573 : (h4).mjd 53225 (h4).raCen 246.711 (h4).decCen 24.44181 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 246.711 24.442 246.711 25.942 plMakePlateFromTile : mjd of obs : 53225.573722 Observed HA/dec of plate center, fiducial point (deg) : 22.998 24.437 22.998 25.936 The rotation angle of the fid. point is -62.281905 plMakePlateFromTile : beginning loop over 1367 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1116.par makePlates : plateInfo struct for plate 1572 : (h4).mjd 53225 (h4).raCen 247.6999 (h4).decCen 23.78203 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.700 23.782 247.700 25.282 plMakePlateFromTile : mjd of obs : 53225.573691 Observed HA/dec of plate center, fiducial point (deg) : 21.998 23.777 21.998 25.277 The rotation angle of the fid. point is -60.112618 plMakePlateFromTile : beginning loop over 1392 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1117.par makePlates : plateInfo struct for plate 1571 : (h4).mjd 53225 (h4).raCen 248.9739 (h4).decCen 22.74765 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.974 22.748 248.974 24.248 plMakePlateFromTile : mjd of obs : 53225.574451 Observed HA/dec of plate center, fiducial point (deg) : 20.998 22.744 20.998 24.243 The rotation angle of the fid. point is -56.994196 plMakePlateFromTile : beginning loop over 1361 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (185.83, 55.90, 7.6) and (186.83, 55.88, 8.2) checkLTHo : distance = 1.004, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(186.83, 55.88, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1118.par makePlates : plateInfo struct for plate 1570 : (h4).mjd 53225 (h4).raCen 250.4203 (h4).decCen 21.79927 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.420 21.799 250.420 23.299 plMakePlateFromTile : mjd of obs : 53225.614482 Observed HA/dec of plate center, fiducial point (deg) : 33.998 21.797 33.998 23.297 The rotation angle of the fid. point is -62.603458 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-104.17, 262.23, 7.6) and (-103.17, 262.20, 8.2) checkLTHo : distance = 1.004, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-103.17, 262.20, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1119.par makePlates : plateInfo struct for plate 1569 : (h4).mjd 53225 (h4).raCen 251.7454 (h4).decCen 20.82956 (h4).haCen 33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 251.745 20.830 251.745 22.330 plMakePlateFromTile : mjd of obs : 53225.615383 Observed HA/dec of plate center, fiducial point (deg) : 32.998 20.828 32.998 22.328 The rotation angle of the fid. point is -60.878732 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1120.par makePlates : plateInfo struct for plate 1568 : (h4).mjd 53225 (h4).raCen 253.0114 (h4).decCen 19.82129 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.011 19.821 253.011 21.321 plMakePlateFromTile : mjd of obs : 53225.613349 Observed HA/dec of plate center, fiducial point (deg) : 30.998 19.820 30.998 21.320 The rotation angle of the fid. point is -58.557720 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk76/complete//plPlugMapT-1121.par makePlates : plateInfo struct for plate 1567 : (h4).mjd 53225 (h4).raCen 254.4402 (h4).decCen 18.55888 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.440 18.559 254.440 20.059 plMakePlateFromTile : mjd of obs : 53225.614538 Observed HA/dec of plate center, fiducial point (deg) : 29.998 18.559 29.998 20.058 The rotation angle of the fid. point is -56.212692 plMakePlateFromTile : beginning loop over 1285 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Sep 3 19:20:58 CDT 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_63/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_63/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1581.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 113 2 13 98 3 10 94 4 8 97 5 15 125 6 14 104 7 12 95 8 16 108 9 17 103 10 20 134 11 14 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3813 40 4 499 35 plFiberPlate : adding spectro-photo std with objId = 3992 40 6 86 11 plFiberPlate : adding spectro-photo std with objId = 3813 40 5 500 114 plFiberPlate : adding spectro-photo std with objId = 3813 40 4 503 4 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 94 66 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 88 110 plFiberPlate : adding spectro-photo std with objId = 3992 40 5 85 68 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 95 91 plFiberPlate : 128 possible sky positions to use as objects from a possible 599. plFiberPlate : 65 possible sky positions to use as objects from a possible 598. plFiberPlate : 34 possible sky positions to use as objects from a possible 597. plFiberPlate : 24 possible sky positions to use as objects from a possible 596. plFiberPlate : 29 possible sky positions to use as objects from a possible 595. plFiberPlate : 29 possible sky positions to use as objects from a possible 594. plFiberPlate : 34 possible sky positions to use as objects from a possible 593. plFiberPlate : 58 possible sky positions to use as objects from a possible 592. plFiberPlate : 47 possible sky positions to use as objects from a possible 591. plFiberPlate : 31 possible sky positions to use as objects from a possible 590. plFiberPlate : 23 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 75 possible sky positions to use as objects from a possible 583. plFiberPlate : 48 possible sky positions to use as objects from a possible 582. plFiberPlate : 33 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 19 possible sky positions to use as objects from a possible 576. plFiberPlate : 22 possible sky positions to use as objects from a possible 575. plFiberPlate : 56 possible sky positions to use as objects from a possible 574. plFiberPlate : 50 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 9 possible sky positions to use as objects from a possible 570. plFiberPlate : 22 possible sky positions to use as objects from a possible 569. plFiberPlate : 30 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1581.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1581.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1580.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 92 2 9 80 3 3 95 4 12 114 5 10 115 6 11 88 7 12 92 8 15 104 9 19 124 10 17 139 11 15 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3919 40 6 209 94 plFiberPlate : adding spectro-photo std with objId = 3813 40 4 499 35 plFiberPlate : adding spectro-photo std with objId = 3992 40 5 104 89 plFiberPlate : adding spectro-photo std with objId = 3813 40 5 500 114 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 11 101 plFiberPlate : adding spectro-photo std with objId = 3813 40 4 503 4 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 104 78 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 95 91 plFiberPlate : 132 possible sky positions to use as objects from a possible 563. plFiberPlate : 73 possible sky positions to use as objects from a possible 562. plFiberPlate : 34 possible sky positions to use as objects from a possible 561. plFiberPlate : 10 possible sky positions to use as objects from a possible 560. plFiberPlate : 20 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 45 possible sky positions to use as objects from a possible 557. plFiberPlate : 71 possible sky positions to use as objects from a possible 556. plFiberPlate : 58 possible sky positions to use as objects from a possible 555. plFiberPlate : 23 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 2 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 81 possible sky positions to use as objects from a possible 547. plFiberPlate : 58 possible sky positions to use as objects from a possible 546. plFiberPlate : 52 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 18 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 53 possible sky positions to use as objects from a possible 538. plFiberPlate : 30 possible sky positions to use as objects from a possible 537. plFiberPlate : 16 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 23 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1581.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1580.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1580.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1579.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 111 2 6 97 3 7 110 4 12 120 5 14 106 6 13 89 7 10 95 8 10 103 9 11 94 10 14 153 11 9 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3997 40 5 23 149 plFiberPlate : adding spectro-photo std with objId = 3992 40 4 120 77 plFiberPlate : adding spectro-photo std with objId = 3992 40 5 111 100 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 113 62 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 120 152 plFiberPlate : adding spectro-photo std with objId = 3992 40 4 113 78 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 28 138 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 108 48 plFiberPlate : 125 possible sky positions to use as objects from a possible 592. plFiberPlate : 51 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 21 possible sky positions to use as objects from a possible 588. plFiberPlate : 30 possible sky positions to use as objects from a possible 587. plFiberPlate : 41 possible sky positions to use as objects from a possible 586. plFiberPlate : 49 possible sky positions to use as objects from a possible 585. plFiberPlate : 28 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 2 possible sky positions to use as objects from a possible 581. plFiberPlate : 6 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 17 possible sky positions to use as objects from a possible 577. plFiberPlate : 49 possible sky positions to use as objects from a possible 576. plFiberPlate : 34 possible sky positions to use as objects from a possible 575. plFiberPlate : 25 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 8 possible sky positions to use as objects from a possible 572. plFiberPlate : 8 possible sky positions to use as objects from a possible 571. plFiberPlate : 9 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 55 possible sky positions to use as objects from a possible 567. plFiberPlate : 43 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 9 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 31 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1580.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1579.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1579.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1578.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 84 2 13 87 3 7 102 4 5 120 5 13 107 6 14 93 7 11 98 8 12 104 9 11 87 10 15 146 11 12 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 136 164 plFiberPlate : adding spectro-photo std with objId = 3997 40 5 40 120 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 137 110 plFiberPlate : adding spectro-photo std with objId = 3992 40 4 120 77 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 130 80 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 120 152 plFiberPlate : adding spectro-photo std with objId = 3997 40 3 38 262 plFiberPlate : adding spectro-photo std with objId = 3992 40 4 136 131 plFiberPlate : 113 possible sky positions to use as objects from a possible 555. plFiberPlate : 33 possible sky positions to use as objects from a possible 554. plFiberPlate : 10 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 16 possible sky positions to use as objects from a possible 551. plFiberPlate : 13 possible sky positions to use as objects from a possible 550. plFiberPlate : 14 possible sky positions to use as objects from a possible 549. plFiberPlate : 58 possible sky positions to use as objects from a possible 548. plFiberPlate : 36 possible sky positions to use as objects from a possible 547. plFiberPlate : 24 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 9 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 7 possible sky positions to use as objects from a possible 540. plFiberPlate : 52 possible sky positions to use as objects from a possible 539. plFiberPlate : 28 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 9 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 5 possible sky positions to use as objects from a possible 533. plFiberPlate : 8 possible sky positions to use as objects from a possible 532. plFiberPlate : 23 possible sky positions to use as objects from a possible 531. plFiberPlate : 56 possible sky positions to use as objects from a possible 530. plFiberPlate : 58 possible sky positions to use as objects from a possible 529. plFiberPlate : 35 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 10 possible sky positions to use as objects from a possible 526. plFiberPlate : 5 possible sky positions to use as objects from a possible 525. plFiberPlate : 50 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1579.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1578.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1578.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1577.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 110 2 7 89 3 12 81 4 13 97 5 11 99 6 14 94 7 25 110 8 27 123 9 20 104 10 13 125 11 7 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3997 40 3 61 132 plFiberPlate : adding spectro-photo std with objId = 3992 40 5 143 110 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 136 164 plFiberPlate : adding spectro-photo std with objId = 3997 40 5 46 38 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 47 121 plFiberPlate : adding spectro-photo std with objId = 3992 40 5 146 143 plFiberPlate : adding spectro-photo std with objId = 3992 40 4 144 90 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 63 126 plFiberPlate : 104 possible sky positions to use as objects from a possible 563. plFiberPlate : 34 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 12 possible sky positions to use as objects from a possible 560. plFiberPlate : 25 possible sky positions to use as objects from a possible 559. plFiberPlate : 20 possible sky positions to use as objects from a possible 558. plFiberPlate : 39 possible sky positions to use as objects from a possible 557. plFiberPlate : 45 possible sky positions to use as objects from a possible 556. plFiberPlate : 47 possible sky positions to use as objects from a possible 555. plFiberPlate : 30 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 12 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 0 possible sky positions to use as objects from a possible 543. plFiberPlate: No sky found for bundle at -13.249 29.230, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 543. plFiberPlate: No sky found for bundle at -13.249 29.230, increase box by 20 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 543. plFiberPlate : 1 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 2 possible sky positions to use as objects from a possible 540. plFiberPlate : 6 possible sky positions to use as objects from a possible 539. plFiberPlate : 45 possible sky positions to use as objects from a possible 538. plFiberPlate : 61 possible sky positions to use as objects from a possible 537. plFiberPlate : 48 possible sky positions to use as objects from a possible 536. plFiberPlate : 40 possible sky positions to use as objects from a possible 535. plFiberPlate : 33 possible sky positions to use as objects from a possible 534. plFiberPlate : 18 possible sky positions to use as objects from a possible 533. plFiberPlate : 94 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1578.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1577.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1577.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1576.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 100 2 8 85 3 16 84 4 22 99 5 11 118 6 12 94 7 10 95 8 5 107 9 14 91 10 17 138 11 12 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3997 40 5 63 173 plFiberPlate : adding spectro-photo std with objId = 3992 40 5 163 258 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 77 231 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 65 268 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 164 81 plFiberPlate : adding spectro-photo std with objId = 3997 40 3 72 177 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 161 111 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 63 126 plFiberPlate : 115 possible sky positions to use as objects from a possible 565. plFiberPlate : 74 possible sky positions to use as objects from a possible 564. plFiberPlate : 38 possible sky positions to use as objects from a possible 563. plFiberPlate : 27 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 26 possible sky positions to use as objects from a possible 560. plFiberPlate : 35 possible sky positions to use as objects from a possible 559. plFiberPlate : 68 possible sky positions to use as objects from a possible 558. plFiberPlate : 38 possible sky positions to use as objects from a possible 557. plFiberPlate : 21 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 9 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 15 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 45 possible sky positions to use as objects from a possible 549. plFiberPlate : 35 possible sky positions to use as objects from a possible 548. plFiberPlate : 24 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 10 possible sky positions to use as objects from a possible 544. plFiberPlate : 9 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 5 possible sky positions to use as objects from a possible 541. plFiberPlate : 48 possible sky positions to use as objects from a possible 540. plFiberPlate : 47 possible sky positions to use as objects from a possible 539. plFiberPlate : 29 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 6 possible sky positions to use as objects from a possible 536. plFiberPlate : 9 possible sky positions to use as objects from a possible 535. plFiberPlate : 21 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1577.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1576.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1576.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1575.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 114 2 11 93 3 9 60 4 12 86 5 12 131 6 9 96 7 11 70 8 13 93 9 10 97 10 24 146 11 13 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3919 40 5 273 164 plFiberPlate : adding spectro-photo std with objId = 3927 40 2 116 39 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 77 231 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 65 268 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 115 84 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 164 81 plFiberPlate : adding spectro-photo std with objId = 3919 40 2 272 53 plFiberPlate : adding spectro-photo std with objId = 3997 40 3 72 177 plFiberPlate : 96 possible sky positions to use as objects from a possible 547. plFiberPlate : 39 possible sky positions to use as objects from a possible 546. plFiberPlate : 26 possible sky positions to use as objects from a possible 545. plFiberPlate : 20 possible sky positions to use as objects from a possible 544. plFiberPlate : 19 possible sky positions to use as objects from a possible 543. plFiberPlate : 36 possible sky positions to use as objects from a possible 542. plFiberPlate : 40 possible sky positions to use as objects from a possible 541. plFiberPlate : 82 possible sky positions to use as objects from a possible 540. plFiberPlate : 77 possible sky positions to use as objects from a possible 539. plFiberPlate : 62 possible sky positions to use as objects from a possible 538. plFiberPlate : 51 possible sky positions to use as objects from a possible 537. plFiberPlate : 35 possible sky positions to use as objects from a possible 536. plFiberPlate : 40 possible sky positions to use as objects from a possible 535. plFiberPlate : 25 possible sky positions to use as objects from a possible 534. plFiberPlate : 23 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 89 possible sky positions to use as objects from a possible 531. plFiberPlate : 38 possible sky positions to use as objects from a possible 530. plFiberPlate : 24 possible sky positions to use as objects from a possible 529. plFiberPlate : 14 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 6 possible sky positions to use as objects from a possible 526. plFiberPlate : 4 possible sky positions to use as objects from a possible 525. plFiberPlate : 5 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 60 possible sky positions to use as objects from a possible 522. plFiberPlate : 26 possible sky positions to use as objects from a possible 521. plFiberPlate : 13 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 7 possible sky positions to use as objects from a possible 518. plFiberPlate : 13 possible sky positions to use as objects from a possible 517. plFiberPlate : 16 possible sky positions to use as objects from a possible 516. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1576.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1575.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1575.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1574.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 119 2 6 79 3 9 68 4 16 100 5 16 118 6 13 89 7 14 85 8 15 98 9 12 101 10 17 130 11 11 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3919 40 5 281 254 plFiberPlate : adding spectro-photo std with objId = 3919 40 2 276 68 plFiberPlate : adding spectro-photo std with objId = 3919 40 4 282 75 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 87 126 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 164 81 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 82 35 plFiberPlate : adding spectro-photo std with objId = 3997 40 3 72 177 plFiberPlate : adding spectro-photo std with objId = 3992 40 2 161 111 plFiberPlate : 93 possible sky positions to use as objects from a possible 557. plFiberPlate : 76 possible sky positions to use as objects from a possible 556. plFiberPlate : 33 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : 33 possible sky positions to use as objects from a possible 553. plFiberPlate : 10 possible sky positions to use as objects from a possible 552. plFiberPlate : 57 possible sky positions to use as objects from a possible 551. plFiberPlate : 104 possible sky positions to use as objects from a possible 550. plFiberPlate : 69 possible sky positions to use as objects from a possible 549. plFiberPlate : 62 possible sky positions to use as objects from a possible 548. plFiberPlate : 51 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 16 possible sky positions to use as objects from a possible 545. plFiberPlate : 18 possible sky positions to use as objects from a possible 544. plFiberPlate : 25 possible sky positions to use as objects from a possible 543. plFiberPlate : 52 possible sky positions to use as objects from a possible 542. plFiberPlate : 121 possible sky positions to use as objects from a possible 541. plFiberPlate : 67 possible sky positions to use as objects from a possible 540. plFiberPlate : 35 possible sky positions to use as objects from a possible 539. plFiberPlate : 18 possible sky positions to use as objects from a possible 538. plFiberPlate : 18 possible sky positions to use as objects from a possible 537. plFiberPlate : 22 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 24 possible sky positions to use as objects from a possible 534. plFiberPlate : 14 possible sky positions to use as objects from a possible 533. plFiberPlate : 36 possible sky positions to use as objects from a possible 532. plFiberPlate : 33 possible sky positions to use as objects from a possible 531. plFiberPlate : 36 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 3 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1575.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1574.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1574.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1573.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 115 2 14 93 3 11 70 4 8 87 5 14 108 6 14 86 7 12 71 8 12 89 9 18 101 10 18 144 11 15 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 94 107 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 95 185 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 135 246 plFiberPlate : adding spectro-photo std with objId = 3927 40 2 130 187 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 87 126 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 77 231 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 89 54 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 82 35 plFiberPlate : 74 possible sky positions to use as objects from a possible 542. plFiberPlate : 63 possible sky positions to use as objects from a possible 541. plFiberPlate : 53 possible sky positions to use as objects from a possible 540. plFiberPlate : 32 possible sky positions to use as objects from a possible 539. plFiberPlate : 59 possible sky positions to use as objects from a possible 538. plFiberPlate : 42 possible sky positions to use as objects from a possible 537. plFiberPlate : 38 possible sky positions to use as objects from a possible 536. plFiberPlate : 65 possible sky positions to use as objects from a possible 535. plFiberPlate : 45 possible sky positions to use as objects from a possible 534. plFiberPlate : 38 possible sky positions to use as objects from a possible 533. plFiberPlate : 31 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 21 possible sky positions to use as objects from a possible 530. plFiberPlate : 29 possible sky positions to use as objects from a possible 529. plFiberPlate : 20 possible sky positions to use as objects from a possible 528. plFiberPlate : 18 possible sky positions to use as objects from a possible 527. plFiberPlate : 76 possible sky positions to use as objects from a possible 526. plFiberPlate : 47 possible sky positions to use as objects from a possible 525. plFiberPlate : 37 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 28 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : 2 possible sky positions to use as objects from a possible 520. plFiberPlate : 9 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 45 possible sky positions to use as objects from a possible 517. plFiberPlate : 16 possible sky positions to use as objects from a possible 516. plFiberPlate : 13 possible sky positions to use as objects from a possible 515. plFiberPlate : 6 possible sky positions to use as objects from a possible 514. plFiberPlate : 4 possible sky positions to use as objects from a possible 513. plFiberPlate : 6 possible sky positions to use as objects from a possible 512. plFiberPlate : 3 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1574.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1573.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1573.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1572.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 112 2 11 91 3 9 86 4 15 104 5 17 124 6 10 90 7 14 70 8 24 84 9 17 95 10 17 157 11 16 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 94 107 plFiberPlate : adding spectro-photo std with objId = 3919 40 5 294 206 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 96 173 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 144 185 plFiberPlate : adding spectro-photo std with objId = 3997 40 2 87 126 plFiberPlate : adding spectro-photo std with objId = 3919 40 4 294 203 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 89 54 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 186 56 plFiberPlate : 111 possible sky positions to use as objects from a possible 548. plFiberPlate : 86 possible sky positions to use as objects from a possible 547. plFiberPlate : 63 possible sky positions to use as objects from a possible 546. plFiberPlate : 48 possible sky positions to use as objects from a possible 545. plFiberPlate : 45 possible sky positions to use as objects from a possible 544. plFiberPlate : 42 possible sky positions to use as objects from a possible 543. plFiberPlate : 33 possible sky positions to use as objects from a possible 542. plFiberPlate : 71 possible sky positions to use as objects from a possible 541. plFiberPlate : 62 possible sky positions to use as objects from a possible 540. plFiberPlate : 47 possible sky positions to use as objects from a possible 539. plFiberPlate : 28 possible sky positions to use as objects from a possible 538. plFiberPlate : 19 possible sky positions to use as objects from a possible 537. plFiberPlate : 16 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 67 possible sky positions to use as objects from a possible 532. plFiberPlate : 61 possible sky positions to use as objects from a possible 531. plFiberPlate : 22 possible sky positions to use as objects from a possible 530. plFiberPlate : 8 possible sky positions to use as objects from a possible 529. plFiberPlate : 23 possible sky positions to use as objects from a possible 528. plFiberPlate : 9 possible sky positions to use as objects from a possible 527. plFiberPlate : 4 possible sky positions to use as objects from a possible 526. plFiberPlate : 5 possible sky positions to use as objects from a possible 525. plFiberPlate : 16 possible sky positions to use as objects from a possible 524. plFiberPlate : 45 possible sky positions to use as objects from a possible 523. plFiberPlate : 7 possible sky positions to use as objects from a possible 522. plFiberPlate : 5 possible sky positions to use as objects from a possible 521. plFiberPlate : 11 possible sky positions to use as objects from a possible 520. plFiberPlate : 7 possible sky positions to use as objects from a possible 519. plFiberPlate : 8 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1573.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1572.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1572.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1571.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 98 2 11 79 3 4 58 4 10 80 5 17 139 6 13 105 7 10 66 8 12 78 9 12 90 10 18 109 11 19 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3919 40 4 294 203 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 158 167 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 150 79 plFiberPlate : adding spectro-photo std with objId = 4003 40 5 40 204 plFiberPlate : adding spectro-photo std with objId = 3992 40 3 186 56 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 38 261 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 157 65 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 148 206 plFiberPlate : 64 possible sky positions to use as objects from a possible 504. plFiberPlate : 50 possible sky positions to use as objects from a possible 503. plFiberPlate : 41 possible sky positions to use as objects from a possible 502. plFiberPlate : 25 possible sky positions to use as objects from a possible 501. plFiberPlate : 27 possible sky positions to use as objects from a possible 500. plFiberPlate : 39 possible sky positions to use as objects from a possible 499. plFiberPlate : 50 possible sky positions to use as objects from a possible 498. plFiberPlate : 71 possible sky positions to use as objects from a possible 497. plFiberPlate : 44 possible sky positions to use as objects from a possible 496. plFiberPlate : 28 possible sky positions to use as objects from a possible 495. plFiberPlate : 15 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 26 possible sky positions to use as objects from a possible 491. plFiberPlate : 25 possible sky positions to use as objects from a possible 490. plFiberPlate : 20 possible sky positions to use as objects from a possible 489. plFiberPlate : 96 possible sky positions to use as objects from a possible 488. plFiberPlate : 81 possible sky positions to use as objects from a possible 487. plFiberPlate : 37 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : 12 possible sky positions to use as objects from a possible 484. plFiberPlate : 13 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 14 possible sky positions to use as objects from a possible 481. plFiberPlate : 13 possible sky positions to use as objects from a possible 480. plFiberPlate : 62 possible sky positions to use as objects from a possible 479. plFiberPlate : 30 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : 4 possible sky positions to use as objects from a possible 476. plFiberPlate : 11 possible sky positions to use as objects from a possible 475. plFiberPlate : 5 possible sky positions to use as objects from a possible 474. plFiberPlate : 3 possible sky positions to use as objects from a possible 473. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1572.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1571.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1571.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1570.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 119 2 17 97 3 11 73 4 14 79 5 24 103 6 16 87 7 9 83 8 13 101 9 17 103 10 23 144 11 18 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3927 40 2 163 6 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 167 278 plFiberPlate : adding spectro-photo std with objId = 4003 40 3 55 171 plFiberPlate : adding spectro-photo std with objId = 3927 40 5 150 207 plFiberPlate : adding spectro-photo std with objId = 3919 40 5 306 279 plFiberPlate : adding spectro-photo std with objId = 3997 40 4 113 21 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 50 218 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 157 65 plFiberPlate : 93 possible sky positions to use as objects from a possible 540. plFiberPlate : 65 possible sky positions to use as objects from a possible 539. plFiberPlate : 58 possible sky positions to use as objects from a possible 538. plFiberPlate : 53 possible sky positions to use as objects from a possible 537. plFiberPlate : 19 possible sky positions to use as objects from a possible 536. plFiberPlate : 51 possible sky positions to use as objects from a possible 535. plFiberPlate : 44 possible sky positions to use as objects from a possible 534. plFiberPlate : 69 possible sky positions to use as objects from a possible 533. plFiberPlate : 56 possible sky positions to use as objects from a possible 532. plFiberPlate : 33 possible sky positions to use as objects from a possible 531. plFiberPlate : 24 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 21 possible sky positions to use as objects from a possible 528. plFiberPlate : 12 possible sky positions to use as objects from a possible 527. plFiberPlate : 26 possible sky positions to use as objects from a possible 526. plFiberPlate : 25 possible sky positions to use as objects from a possible 525. plFiberPlate : 74 possible sky positions to use as objects from a possible 524. plFiberPlate : 67 possible sky positions to use as objects from a possible 523. plFiberPlate : 43 possible sky positions to use as objects from a possible 522. plFiberPlate : 29 possible sky positions to use as objects from a possible 521. plFiberPlate : 6 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 27 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 24 possible sky positions to use as objects from a possible 516. plFiberPlate : 49 possible sky positions to use as objects from a possible 515. plFiberPlate : 35 possible sky positions to use as objects from a possible 514. plFiberPlate : 20 possible sky positions to use as objects from a possible 513. plFiberPlate : 9 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 6 possible sky positions to use as objects from a possible 510. plFiberPlate : 13 possible sky positions to use as objects from a possible 509. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1571.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1570.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1570.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1569.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 96 2 18 74 3 13 63 4 20 93 5 21 108 6 18 90 7 15 79 8 22 92 9 21 91 10 32 120 11 25 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 62 41 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 59 186 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 177 47 plFiberPlate : adding spectro-photo std with objId = 4003 40 3 55 171 plFiberPlate : adding spectro-photo std with objId = 4003 40 5 60 41 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 170 335 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 178 65 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 171 136 plFiberPlate : 91 possible sky positions to use as objects from a possible 521. plFiberPlate : 55 possible sky positions to use as objects from a possible 520. plFiberPlate : 50 possible sky positions to use as objects from a possible 519. plFiberPlate : 27 possible sky positions to use as objects from a possible 518. plFiberPlate : 27 possible sky positions to use as objects from a possible 517. plFiberPlate : 19 possible sky positions to use as objects from a possible 516. plFiberPlate : 51 possible sky positions to use as objects from a possible 515. plFiberPlate : 95 possible sky positions to use as objects from a possible 514. plFiberPlate : 59 possible sky positions to use as objects from a possible 513. plFiberPlate : 41 possible sky positions to use as objects from a possible 512. plFiberPlate : 28 possible sky positions to use as objects from a possible 511. plFiberPlate : 16 possible sky positions to use as objects from a possible 510. plFiberPlate : 13 possible sky positions to use as objects from a possible 509. plFiberPlate : 24 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 14 possible sky positions to use as objects from a possible 506. plFiberPlate : 71 possible sky positions to use as objects from a possible 505. plFiberPlate : 54 possible sky positions to use as objects from a possible 504. plFiberPlate : 43 possible sky positions to use as objects from a possible 503. plFiberPlate : 20 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 19 possible sky positions to use as objects from a possible 500. plFiberPlate : 7 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 14 possible sky positions to use as objects from a possible 497. plFiberPlate : 52 possible sky positions to use as objects from a possible 496. plFiberPlate : 43 possible sky positions to use as objects from a possible 495. plFiberPlate : 21 possible sky positions to use as objects from a possible 494. plFiberPlate : 16 possible sky positions to use as objects from a possible 493. plFiberPlate : 10 possible sky positions to use as objects from a possible 492. plFiberPlate : 8 possible sky positions to use as objects from a possible 491. plFiberPlate : 22 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1570.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1569.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1569.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1568.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 96 2 14 73 3 15 55 4 19 75 5 34 110 6 29 82 7 16 65 8 17 77 9 31 84 10 26 109 11 20 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 177 47 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 189 25 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 187 109 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 170 335 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 72 140 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 178 65 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 171 136 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 76 220 plFiberPlate : 57 possible sky positions to use as objects from a possible 472. plFiberPlate : 46 possible sky positions to use as objects from a possible 471. plFiberPlate : 30 possible sky positions to use as objects from a possible 470. plFiberPlate : 17 possible sky positions to use as objects from a possible 469. plFiberPlate : 22 possible sky positions to use as objects from a possible 468. plFiberPlate : 32 possible sky positions to use as objects from a possible 467. plFiberPlate : 54 possible sky positions to use as objects from a possible 466. plFiberPlate : 67 possible sky positions to use as objects from a possible 465. plFiberPlate : 46 possible sky positions to use as objects from a possible 464. plFiberPlate : 33 possible sky positions to use as objects from a possible 463. plFiberPlate : 24 possible sky positions to use as objects from a possible 462. plFiberPlate : 18 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : 13 possible sky positions to use as objects from a possible 459. plFiberPlate : 24 possible sky positions to use as objects from a possible 458. plFiberPlate : 22 possible sky positions to use as objects from a possible 457. plFiberPlate : 47 possible sky positions to use as objects from a possible 456. plFiberPlate : 44 possible sky positions to use as objects from a possible 455. plFiberPlate : 37 possible sky positions to use as objects from a possible 454. plFiberPlate : 11 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 6 possible sky positions to use as objects from a possible 451. plFiberPlate : 7 possible sky positions to use as objects from a possible 450. plFiberPlate : 8 possible sky positions to use as objects from a possible 449. plFiberPlate : 13 possible sky positions to use as objects from a possible 448. plFiberPlate : 50 possible sky positions to use as objects from a possible 447. plFiberPlate : 42 possible sky positions to use as objects from a possible 446. plFiberPlate : 20 possible sky positions to use as objects from a possible 445. plFiberPlate : 18 possible sky positions to use as objects from a possible 444. plFiberPlate : 6 possible sky positions to use as objects from a possible 443. plFiberPlate : 10 possible sky positions to use as objects from a possible 442. plFiberPlate : 15 possible sky positions to use as objects from a possible 441. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1569.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1568.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1568.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.1/plPlugMapP-1567.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 54 2 7 52 3 14 38 4 16 55 5 23 102 6 20 79 7 18 70 8 22 73 9 22 87 10 22 95 11 8 66 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3927 40 3 187 88 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 187 109 plFiberPlate : adding spectro-photo std with objId = 3919 40 4 352 256 plFiberPlate : adding spectro-photo std with objId = 3919 40 3 348 187 plFiberPlate : adding spectro-photo std with objId = 3927 40 4 196 123 plFiberPlate : adding spectro-photo std with objId = 4003 40 3 85 244 plFiberPlate : adding spectro-photo std with objId = 4003 40 5 83 240 plFiberPlate : adding spectro-photo std with objId = 4003 40 4 76 220 plFiberPlate : 50 possible sky positions to use as objects from a possible 375. plFiberPlate : 35 possible sky positions to use as objects from a possible 374. plFiberPlate : 31 possible sky positions to use as objects from a possible 373. plFiberPlate : 13 possible sky positions to use as objects from a possible 372. plFiberPlate : 17 possible sky positions to use as objects from a possible 371. plFiberPlate : 20 possible sky positions to use as objects from a possible 370. plFiberPlate : 21 possible sky positions to use as objects from a possible 369. plFiberPlate : 41 possible sky positions to use as objects from a possible 368. plFiberPlate : 18 possible sky positions to use as objects from a possible 367. plFiberPlate : 13 possible sky positions to use as objects from a possible 366. plFiberPlate : 7 possible sky positions to use as objects from a possible 365. plFiberPlate : 3 possible sky positions to use as objects from a possible 364. plFiberPlate : 8 possible sky positions to use as objects from a possible 363. plFiberPlate : 6 possible sky positions to use as objects from a possible 362. plFiberPlate : 8 possible sky positions to use as objects from a possible 361. plFiberPlate : 11 possible sky positions to use as objects from a possible 360. plFiberPlate : 45 possible sky positions to use as objects from a possible 359. plFiberPlate : 20 possible sky positions to use as objects from a possible 358. plFiberPlate : 13 possible sky positions to use as objects from a possible 357. plFiberPlate : 7 possible sky positions to use as objects from a possible 356. plFiberPlate : 6 possible sky positions to use as objects from a possible 355. plFiberPlate : 3 possible sky positions to use as objects from a possible 354. plFiberPlate : 4 possible sky positions to use as objects from a possible 353. plFiberPlate : 2 possible sky positions to use as objects from a possible 352. plFiberPlate : 11 possible sky positions to use as objects from a possible 351. plFiberPlate : 56 possible sky positions to use as objects from a possible 350. plFiberPlate : 32 possible sky positions to use as objects from a possible 349. plFiberPlate : 16 possible sky positions to use as objects from a possible 348. plFiberPlate : 12 possible sky positions to use as objects from a possible 347. plFiberPlate : 5 possible sky positions to use as objects from a possible 346. plFiberPlate : 9 possible sky positions to use as objects from a possible 345. plFiberPlate : 28 possible sky positions to use as objects from a possible 344. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1568.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1567.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.1/plOverlay-1567.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Sep 3 19:21:20 CDT 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_63/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_63/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1581.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1581.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1581.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1580.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1580.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1580.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1579.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.4628,-10.1190) and (5.70,-11.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1579.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1579.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1578.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1578.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1578.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1577.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.1010,-10.5665) and (5.55,-11.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1577.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1577.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1576.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.4261,-11.6807) and (-3.06,-12.29) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1576.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1576.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1575.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1575.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1575.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1574.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.1798,9.8318) and (7.19,10.34) plMakeFanucCodes : fixed path between (-9.6006,7.9315) and (-11.20,6.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1574.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1574.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1573.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.6132,11.4315) and (-3.18,12.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1573.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1573.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1572.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.5542,-5.4714) and (11.82,-4.91) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1572.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1572.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1571.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1571.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1571.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1570.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.9261,-11.7980) and (2.72,-12.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1570.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1570.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1569.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.9669,-7.7182) and (11.03,-6.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1569.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1569.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1568.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1568.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1568.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.8078,8.1331) and (-1.78,12.67) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1567.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1567.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.1/plFanuc-1567.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Sep 3 19:21:57 CDT 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_63/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_63/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bb756c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1581 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1580 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1579 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1578 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1577 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1576 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1575 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1574 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1573 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1572 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1571 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1570 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1569 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1568 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1567 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Sep 3 19:22:14 CDT 2003 Begin running "plateEnder dr2003.09.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_63/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_63/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.09.1 -morePipes 1" failed. PS: Read file for stderr output of this job.