Sender: LSF System Subject: Job 98428: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Sep 3 15:14:15 2003 Results reported at Wed Sep 3 15:16:30 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_62 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.09.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 120.54 sec. Max Memory : 11 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Sep 3 15:14:16 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Sep 3 15:14:16 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_2/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v2_20/Linux:/fnal/ups/prd/ups/v4_6Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_0/Linux/bin:/sdss/ups/prd/photo/v5_4_25/Linux/bin:/sdss/ups/prd/specflat/v1_4/Linux/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_9_7/Linux/bin:/sdss/ups/prd/idlspec2d/v4_9_8/Linux/bin:/sdss/ups/prd/spectro/v5_7_7/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_62/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed Sep 3 15:14:16 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_62/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_9_8/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_9_7/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_25/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_4/Linux SPECTRO_DIR=/sdss/ups/prd/spectro/v5_7_7/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_XTtVhI --------------------------------------------------------------- --------------------------------------------------------------- Wed Sep 3 15:14:17 CDT 2003 Begin running plate --------------------------------------------------------------- Wed Sep 3 15:14:17 CDT 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_62/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_62/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8ba2ccc makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1092.par makePlates : plateInfo struct for plate 1582 : (h4).mjd 52987 (h4).raCen 117.1541 (h4).decCen 18.99901 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 117.154 18.999 117.154 20.499 plMakePlateFromTile : mjd of obs : 52987.726149 Observed HA/dec of plate center, fiducial point (deg) : -27.002 18.995 -27.003 20.495 The rotation angle of the fid. point is 54.939512 plMakePlateFromTile : beginning loop over 1056 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1093.par makePlates : plateInfo struct for plate 1583 : (h4).mjd 52987 (h4).raCen 119.3758 (h4).decCen 20.7951 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.376 20.795 119.376 22.295 plMakePlateFromTile : mjd of obs : 52987.726763 Observed HA/dec of plate center, fiducial point (deg) : -29.002 20.790 -29.003 22.290 The rotation angle of the fid. point is 58.997755 plMakePlateFromTile : beginning loop over 1206 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1094.par makePlates : plateInfo struct for plate 1584 : (h4).mjd 52987 (h4).raCen 121.9568 (h4).decCen 22.53332 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.957 22.533 121.957 24.033 plMakePlateFromTile : mjd of obs : 52987.728372 Observed HA/dec of plate center, fiducial point (deg) : -31.002 22.527 -31.003 24.026 The rotation angle of the fid. point is 62.668854 plMakePlateFromTile : beginning loop over 1163 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1095.par makePlates : plateInfo struct for plate 1585 : (h4).mjd 52987 (h4).raCen 124.522 (h4).decCen 24.29512 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.522 24.295 124.522 25.795 plMakePlateFromTile : mjd of obs : 52987.727165 Observed HA/dec of plate center, fiducial point (deg) : -34.002 24.287 -34.003 25.787 The rotation angle of the fid. point is 66.277174 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1096.par makePlates : plateInfo struct for plate 1586 : (h4).mjd 52987 (h4).raCen 127.1634 (h4).decCen 25.86888 (h4).haCen -37 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.163 25.869 127.163 27.369 plMakePlateFromTile : mjd of obs : 52987.726169 Observed HA/dec of plate center, fiducial point (deg) : -37.002 25.860 -37.003 27.360 The rotation angle of the fid. point is 69.009386 plMakePlateFromTile : beginning loop over 1153 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-98.65, -290.81, 6.9) and (-98.45, -290.59, 7.7) checkLTHo : distance = 0.297, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-98.45, -290.59, 7.7) checkLTHo : collision between LIGHT_TRAPs (-90.76, 232.48, 6.2) and (-90.95, 232.22, 6.4) checkLTHo : distance = 0.326, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-90.95, 232.22, 6.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1097.par makePlates : plateInfo struct for plate 1587 : (h4).mjd 52987 (h4).raCen 129.5602 (h4).decCen 27.54308 (h4).haCen -39 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.560 27.543 129.560 29.043 plMakePlateFromTile : mjd of obs : 52987.727267 Observed HA/dec of plate center, fiducial point (deg) : -39.002 27.533 -39.003 29.033 The rotation angle of the fid. point is 71.418249 plMakePlateFromTile : beginning loop over 1226 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1098.par makePlates : plateInfo struct for plate 1588 : (h4).mjd 52987 (h4).raCen 131.3479 (h4).decCen 28.51184 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.348 28.512 131.348 30.012 plMakePlateFromTile : mjd of obs : 52987.809809 Observed HA/dec of plate center, fiducial point (deg) : -11.002 28.499 -11.003 29.998 The rotation angle of the fid. point is 62.946115 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (60.84, 55.14, 6.5) and (62.17, 54.04, 4.1) checkLTHo : distance = 1.735, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(60.84, 55.14, 6.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1099.par makePlates : plateInfo struct for plate 1589 : (h4).mjd 52987 (h4).raCen 133.0055 (h4).decCen 29.43345 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.006 29.433 133.006 30.933 plMakePlateFromTile : mjd of obs : 52987.808859 Observed HA/dec of plate center, fiducial point (deg) : -13.002 29.420 -13.003 30.919 The rotation angle of the fid. point is 69.926225 plMakePlateFromTile : beginning loop over 1259 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-255.72, -144.23, 6.5) and (-254.39, -145.35, 4.1) checkLTHo : distance = 1.740, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-255.72, -144.23, 6.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1100.par makePlates : plateInfo struct for plate 1590 : (h4).mjd 52987 (h4).raCen 134.8632 (h4).decCen 30.43275 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.863 30.433 134.863 31.933 plMakePlateFromTile : mjd of obs : 52987.811234 Observed HA/dec of plate center, fiducial point (deg) : -14.002 30.418 -14.003 31.918 The rotation angle of the fid. point is 75.190788 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1101.par makePlates : plateInfo struct for plate 1591 : (h4).mjd 52987 (h4).raCen 137.1329 (h4).decCen 31.58598 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.133 31.586 137.133 33.086 plMakePlateFromTile : mjd of obs : 52987.809209 Observed HA/dec of plate center, fiducial point (deg) : -17.002 31.570 -17.003 33.070 The rotation angle of the fid. point is 80.698129 plMakePlateFromTile : beginning loop over 1199 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1102.par makePlates : plateInfo struct for plate 1592 : (h4).mjd 52987 (h4).raCen 139.6978 (h4).decCen 32.79865 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.698 32.799 139.698 34.299 plMakePlateFromTile : mjd of obs : 52987.810771 Observed HA/dec of plate center, fiducial point (deg) : -19.002 32.782 -19.003 34.281 The rotation angle of the fid. point is 84.846553 plMakePlateFromTile : beginning loop over 1277 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1103.par makePlates : plateInfo struct for plate 1593 : (h4).mjd 52987 (h4).raCen 142.29 (h4).decCen 33.97942 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.290 33.979 142.290 35.479 plMakePlateFromTile : mjd of obs : 52987.809638 Observed HA/dec of plate center, fiducial point (deg) : -22.002 33.962 -22.003 35.461 The rotation angle of the fid. point is 87.546428 plMakePlateFromTile : beginning loop over 1228 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1104.par makePlates : plateInfo struct for plate 1594 : (h4).mjd 52987 (h4).raCen 144.945 (h4).decCen 35.00282 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.945 35.003 144.945 36.503 plMakePlateFromTile : mjd of obs : 52987.811449 Observed HA/dec of plate center, fiducial point (deg) : -24.002 34.984 -24.003 36.484 The rotation angle of the fid. point is 89.474454 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1105.par makePlates : plateInfo struct for plate 1595 : (h4).mjd 52987 (h4).raCen 147.333 (h4).decCen 35.95093 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.333 35.951 147.333 37.451 plMakePlateFromTile : mjd of obs : 52987.809750 Observed HA/dec of plate center, fiducial point (deg) : -27.002 35.932 -27.003 37.431 The rotation angle of the fid. point is 90.191845 plMakePlateFromTile : beginning loop over 1243 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk75/complete//plPlugMapT-1106.par makePlates : plateInfo struct for plate 1596 : (h4).mjd 52987 (h4).raCen 149.6698 (h4).decCen 36.78722 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.670 36.787 149.670 38.287 plMakePlateFromTile : mjd of obs : 52987.810679 Observed HA/dec of plate center, fiducial point (deg) : -29.002 36.767 -29.003 38.267 The rotation angle of the fid. point is 90.914202 plMakePlateFromTile : beginning loop over 1210 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Sep 3 15:14:41 CDT 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_62/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_62/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1582.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 12 2 0 0 3 8 18 4 19 36 5 36 107 6 39 100 7 27 87 8 26 69 9 39 86 10 21 49 11 5 15 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate: No altObj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 32 48 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 44 193 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 34 248 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 40 90 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 42 310 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 40 106 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 29 331 plFiberPlate : adding spectro-photo std with objId = 3605 20 3 45 75 plFiberPlate : 36 possible sky positions to use as objects from a possible 306. plFiberPlate : 23 possible sky positions to use as objects from a possible 305. plFiberPlate : 18 possible sky positions to use as objects from a possible 304. plFiberPlate : 15 possible sky positions to use as objects from a possible 303. plFiberPlate : 9 possible sky positions to use as objects from a possible 302. plFiberPlate : 6 possible sky positions to use as objects from a possible 301. plFiberPlate : 6 possible sky positions to use as objects from a possible 300. plFiberPlate : 26 possible sky positions to use as objects from a possible 299. plFiberPlate : 19 possible sky positions to use as objects from a possible 298. plFiberPlate : 9 possible sky positions to use as objects from a possible 297. plFiberPlate : 5 possible sky positions to use as objects from a possible 296. plFiberPlate : 2 possible sky positions to use as objects from a possible 295. plFiberPlate : 1 possible sky positions to use as objects from a possible 294. plFiberPlate : 0 possible sky positions to use as objects from a possible 293. plFiberPlate: No sky found for bundle at -4.553 -69.149, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 293. plFiberPlate : 6 possible sky positions to use as objects from a possible 292. plFiberPlate : 4 possible sky positions to use as objects from a possible 291. plFiberPlate : 22 possible sky positions to use as objects from a possible 290. plFiberPlate : 15 possible sky positions to use as objects from a possible 289. plFiberPlate : 5 possible sky positions to use as objects from a possible 288. plFiberPlate : 1 possible sky positions to use as objects from a possible 287. plFiberPlate : 3 possible sky positions to use as objects from a possible 286. plFiberPlate : 2 possible sky positions to use as objects from a possible 285. plFiberPlate : 4 possible sky positions to use as objects from a possible 284. plFiberPlate : 7 possible sky positions to use as objects from a possible 283. plFiberPlate : 2 possible sky positions to use as objects from a possible 282. plFiberPlate : 41 possible sky positions to use as objects from a possible 281. plFiberPlate : 11 possible sky positions to use as objects from a possible 280. plFiberPlate : 8 possible sky positions to use as objects from a possible 279. plFiberPlate : 14 possible sky positions to use as objects from a possible 278. plFiberPlate : 5 possible sky positions to use as objects from a possible 277. plFiberPlate : 6 possible sky positions to use as objects from a possible 276. plFiberPlate : 16 possible sky positions to use as objects from a possible 275. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1582.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1582.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1583.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 40 2 7 12 3 15 53 4 23 93 5 30 126 6 34 99 7 28 80 8 32 79 9 40 111 10 33 89 11 15 41 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3635 40 2 57 230 plFiberPlate : adding spectro-photo std with objId = 3605 20 3 56 88 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 59 218 plFiberPlate : adding spectro-photo std with objId = 3635 40 2 57 25 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 47 89 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 53 245 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 65 191 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 60 251 plFiberPlate : 85 possible sky positions to use as objects from a possible 424. plFiberPlate : 80 possible sky positions to use as objects from a possible 423. plFiberPlate : 62 possible sky positions to use as objects from a possible 422. plFiberPlate : 45 possible sky positions to use as objects from a possible 421. plFiberPlate : 28 possible sky positions to use as objects from a possible 420. plFiberPlate : 17 possible sky positions to use as objects from a possible 419. plFiberPlate : 8 possible sky positions to use as objects from a possible 418. plFiberPlate : 55 possible sky positions to use as objects from a possible 417. plFiberPlate : 44 possible sky positions to use as objects from a possible 416. plFiberPlate : 31 possible sky positions to use as objects from a possible 415. plFiberPlate : 24 possible sky positions to use as objects from a possible 414. plFiberPlate : 16 possible sky positions to use as objects from a possible 413. plFiberPlate : 7 possible sky positions to use as objects from a possible 412. plFiberPlate : 7 possible sky positions to use as objects from a possible 411. plFiberPlate : 11 possible sky positions to use as objects from a possible 410. plFiberPlate : 15 possible sky positions to use as objects from a possible 409. plFiberPlate : 71 possible sky positions to use as objects from a possible 408. plFiberPlate : 27 possible sky positions to use as objects from a possible 407. plFiberPlate : 18 possible sky positions to use as objects from a possible 406. plFiberPlate : 15 possible sky positions to use as objects from a possible 405. plFiberPlate : 11 possible sky positions to use as objects from a possible 404. plFiberPlate : 11 possible sky positions to use as objects from a possible 403. plFiberPlate : 4 possible sky positions to use as objects from a possible 402. plFiberPlate : 6 possible sky positions to use as objects from a possible 401. plFiberPlate : 7 possible sky positions to use as objects from a possible 400. plFiberPlate : 79 possible sky positions to use as objects from a possible 399. plFiberPlate : 35 possible sky positions to use as objects from a possible 398. plFiberPlate : 19 possible sky positions to use as objects from a possible 397. plFiberPlate : 13 possible sky positions to use as objects from a possible 396. plFiberPlate : 7 possible sky positions to use as objects from a possible 395. plFiberPlate : 6 possible sky positions to use as objects from a possible 394. plFiberPlate : 7 possible sky positions to use as objects from a possible 393. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1582.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1583.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1583.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1584.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 30 2 5 19 3 11 50 4 22 86 5 28 119 6 23 103 7 9 82 8 15 77 9 16 87 10 35 89 11 14 51 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 73 156 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 84 133 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 83 84 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 82 104 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 74 148 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 64 161 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 74 23 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 68 239 plFiberPlate : 85 possible sky positions to use as objects from a possible 415. plFiberPlate : 76 possible sky positions to use as objects from a possible 414. plFiberPlate : 70 possible sky positions to use as objects from a possible 413. plFiberPlate : 54 possible sky positions to use as objects from a possible 412. plFiberPlate : 37 possible sky positions to use as objects from a possible 411. plFiberPlate : 28 possible sky positions to use as objects from a possible 410. plFiberPlate : 35 possible sky positions to use as objects from a possible 409. plFiberPlate : 48 possible sky positions to use as objects from a possible 408. plFiberPlate : 31 possible sky positions to use as objects from a possible 407. plFiberPlate : 21 possible sky positions to use as objects from a possible 406. plFiberPlate : 15 possible sky positions to use as objects from a possible 405. plFiberPlate : 12 possible sky positions to use as objects from a possible 404. plFiberPlate : 17 possible sky positions to use as objects from a possible 403. plFiberPlate : 5 possible sky positions to use as objects from a possible 402. plFiberPlate : 8 possible sky positions to use as objects from a possible 401. plFiberPlate : 12 possible sky positions to use as objects from a possible 400. plFiberPlate : 41 possible sky positions to use as objects from a possible 399. plFiberPlate : 4 possible sky positions to use as objects from a possible 398. plFiberPlate : 3 possible sky positions to use as objects from a possible 397. plFiberPlate : 6 possible sky positions to use as objects from a possible 396. plFiberPlate : 7 possible sky positions to use as objects from a possible 395. plFiberPlate : 4 possible sky positions to use as objects from a possible 394. plFiberPlate : 12 possible sky positions to use as objects from a possible 393. plFiberPlate : 5 possible sky positions to use as objects from a possible 392. plFiberPlate : 0 possible sky positions to use as objects from a possible 391. plFiberPlate: No sky found for bundle at 299.624 74.391, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 391. plFiberPlate: No sky found for bundle at 299.624 74.391, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 391. plFiberPlate : 74 possible sky positions to use as objects from a possible 390. plFiberPlate : 17 possible sky positions to use as objects from a possible 389. plFiberPlate : 5 possible sky positions to use as objects from a possible 388. plFiberPlate : 8 possible sky positions to use as objects from a possible 387. plFiberPlate : 7 possible sky positions to use as objects from a possible 386. plFiberPlate : 15 possible sky positions to use as objects from a possible 385. plFiberPlate : 8 possible sky positions to use as objects from a possible 384. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1583.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1584.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1584.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1585.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 38 2 2 12 3 16 50 4 32 81 5 42 121 6 33 96 7 16 78 8 22 76 9 27 88 10 32 94 11 18 43 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3644 40 5 93 206 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 89 104 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 105 71 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 94 70 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 84 38 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 105 50 plFiberPlate : adding spectro-photo std with objId = 3644 40 5 103 48 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 86 155 plFiberPlate : 92 possible sky positions to use as objects from a possible 403. plFiberPlate : 70 possible sky positions to use as objects from a possible 402. plFiberPlate : 63 possible sky positions to use as objects from a possible 401. plFiberPlate : 50 possible sky positions to use as objects from a possible 400. plFiberPlate : 30 possible sky positions to use as objects from a possible 399. plFiberPlate : 18 possible sky positions to use as objects from a possible 398. plFiberPlate : 25 possible sky positions to use as objects from a possible 397. plFiberPlate : 44 possible sky positions to use as objects from a possible 396. plFiberPlate : 41 possible sky positions to use as objects from a possible 395. plFiberPlate : 26 possible sky positions to use as objects from a possible 394. plFiberPlate : 27 possible sky positions to use as objects from a possible 393. plFiberPlate : 20 possible sky positions to use as objects from a possible 392. plFiberPlate : 13 possible sky positions to use as objects from a possible 391. plFiberPlate : 10 possible sky positions to use as objects from a possible 390. plFiberPlate : 12 possible sky positions to use as objects from a possible 389. plFiberPlate : 3 possible sky positions to use as objects from a possible 388. plFiberPlate : 48 possible sky positions to use as objects from a possible 387. plFiberPlate : 22 possible sky positions to use as objects from a possible 386. plFiberPlate : 15 possible sky positions to use as objects from a possible 385. plFiberPlate : 9 possible sky positions to use as objects from a possible 384. plFiberPlate : 14 possible sky positions to use as objects from a possible 383. plFiberPlate : 3 possible sky positions to use as objects from a possible 382. plFiberPlate : 6 possible sky positions to use as objects from a possible 381. plFiberPlate : 11 possible sky positions to use as objects from a possible 380. plFiberPlate : 4 possible sky positions to use as objects from a possible 379. plFiberPlate : 72 possible sky positions to use as objects from a possible 378. plFiberPlate : 23 possible sky positions to use as objects from a possible 377. plFiberPlate : 17 possible sky positions to use as objects from a possible 376. plFiberPlate : 6 possible sky positions to use as objects from a possible 375. plFiberPlate : 6 possible sky positions to use as objects from a possible 374. plFiberPlate : 13 possible sky positions to use as objects from a possible 373. plFiberPlate : 9 possible sky positions to use as objects from a possible 372. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1584.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1585.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1585.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1586.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 40 2 2 14 3 10 53 4 26 103 5 36 110 6 23 90 7 14 73 8 11 86 9 18 85 10 16 96 11 9 41 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3644 40 5 120 82 plFiberPlate : adding spectro-photo std with objId = 3635 40 2 105 137 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 107 108 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 116 145 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 118 126 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 105 152 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 120 52 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 118 33 plFiberPlate : 101 possible sky positions to use as objects from a possible 429. plFiberPlate : 93 possible sky positions to use as objects from a possible 428. plFiberPlate : 75 possible sky positions to use as objects from a possible 427. plFiberPlate : 56 possible sky positions to use as objects from a possible 426. plFiberPlate : 33 possible sky positions to use as objects from a possible 425. plFiberPlate : 15 possible sky positions to use as objects from a possible 424. plFiberPlate : 29 possible sky positions to use as objects from a possible 423. plFiberPlate : 64 possible sky positions to use as objects from a possible 422. plFiberPlate : 50 possible sky positions to use as objects from a possible 421. plFiberPlate : 49 possible sky positions to use as objects from a possible 420. plFiberPlate : 34 possible sky positions to use as objects from a possible 419. plFiberPlate : 16 possible sky positions to use as objects from a possible 418. plFiberPlate : 5 possible sky positions to use as objects from a possible 417. plFiberPlate : 15 possible sky positions to use as objects from a possible 416. plFiberPlate : 9 possible sky positions to use as objects from a possible 415. plFiberPlate : 8 possible sky positions to use as objects from a possible 414. plFiberPlate : 47 possible sky positions to use as objects from a possible 413. plFiberPlate : 36 possible sky positions to use as objects from a possible 412. plFiberPlate : 14 possible sky positions to use as objects from a possible 411. plFiberPlate : 6 possible sky positions to use as objects from a possible 410. plFiberPlate : 6 possible sky positions to use as objects from a possible 409. plFiberPlate : 9 possible sky positions to use as objects from a possible 408. plFiberPlate : 8 possible sky positions to use as objects from a possible 407. plFiberPlate : 17 possible sky positions to use as objects from a possible 406. plFiberPlate : 8 possible sky positions to use as objects from a possible 405. plFiberPlate : 51 possible sky positions to use as objects from a possible 404. plFiberPlate : 8 possible sky positions to use as objects from a possible 403. plFiberPlate : 6 possible sky positions to use as objects from a possible 402. plFiberPlate : 8 possible sky positions to use as objects from a possible 401. plFiberPlate : 9 possible sky positions to use as objects from a possible 400. plFiberPlate : 2 possible sky positions to use as objects from a possible 399. plFiberPlate : 15 possible sky positions to use as objects from a possible 398. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1585.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1586.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1586.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1587.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 62 2 3 32 3 9 56 4 17 82 5 20 121 6 22 98 7 13 83 8 14 106 9 17 110 10 22 111 11 16 60 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 129 110 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 126 32 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 125 89 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 126 128 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 133 99 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 130 30 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 144 39 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 139 44 plFiberPlate : 97 possible sky positions to use as objects from a possible 486. plFiberPlate : 71 possible sky positions to use as objects from a possible 485. plFiberPlate : 58 possible sky positions to use as objects from a possible 484. plFiberPlate : 46 possible sky positions to use as objects from a possible 483. plFiberPlate : 29 possible sky positions to use as objects from a possible 482. plFiberPlate : 7 possible sky positions to use as objects from a possible 481. plFiberPlate : 38 possible sky positions to use as objects from a possible 480. plFiberPlate : 57 possible sky positions to use as objects from a possible 479. plFiberPlate : 51 possible sky positions to use as objects from a possible 478. plFiberPlate : 35 possible sky positions to use as objects from a possible 477. plFiberPlate : 29 possible sky positions to use as objects from a possible 476. plFiberPlate : 20 possible sky positions to use as objects from a possible 475. plFiberPlate : 16 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 15 possible sky positions to use as objects from a possible 472. plFiberPlate : 23 possible sky positions to use as objects from a possible 471. plFiberPlate : 19 possible sky positions to use as objects from a possible 470. plFiberPlate : 27 possible sky positions to use as objects from a possible 469. plFiberPlate : 22 possible sky positions to use as objects from a possible 468. plFiberPlate : 17 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : 11 possible sky positions to use as objects from a possible 465. plFiberPlate : 8 possible sky positions to use as objects from a possible 464. plFiberPlate : 18 possible sky positions to use as objects from a possible 463. plFiberPlate : 13 possible sky positions to use as objects from a possible 462. plFiberPlate : 66 possible sky positions to use as objects from a possible 461. plFiberPlate : 14 possible sky positions to use as objects from a possible 460. plFiberPlate : 7 possible sky positions to use as objects from a possible 459. plFiberPlate : 19 possible sky positions to use as objects from a possible 458. plFiberPlate : 8 possible sky positions to use as objects from a possible 457. plFiberPlate : 14 possible sky positions to use as objects from a possible 456. plFiberPlate : 30 possible sky positions to use as objects from a possible 455. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1586.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1587.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1587.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1588.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 49 2 4 18 3 14 71 4 17 115 5 19 124 6 22 101 7 13 85 8 19 102 9 16 92 10 20 114 11 13 52 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3635 40 2 140 100 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 140 73 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 140 25 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 144 39 plFiberPlate : adding spectro-photo std with objId = 3635 40 6 143 190 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 150 63 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 139 44 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 146 163 plFiberPlate : 119 possible sky positions to use as objects from a possible 491. plFiberPlate : 91 possible sky positions to use as objects from a possible 490. plFiberPlate : 39 possible sky positions to use as objects from a possible 489. plFiberPlate : 5 possible sky positions to use as objects from a possible 488. plFiberPlate : 4 possible sky positions to use as objects from a possible 487. plFiberPlate : 7 possible sky positions to use as objects from a possible 486. plFiberPlate : 19 possible sky positions to use as objects from a possible 485. plFiberPlate : 67 possible sky positions to use as objects from a possible 484. plFiberPlate : 52 possible sky positions to use as objects from a possible 483. plFiberPlate : 39 possible sky positions to use as objects from a possible 482. plFiberPlate : 12 possible sky positions to use as objects from a possible 481. plFiberPlate : 11 possible sky positions to use as objects from a possible 480. plFiberPlate : 6 possible sky positions to use as objects from a possible 479. plFiberPlate : 7 possible sky positions to use as objects from a possible 478. plFiberPlate : 9 possible sky positions to use as objects from a possible 477. plFiberPlate : 19 possible sky positions to use as objects from a possible 476. plFiberPlate : 58 possible sky positions to use as objects from a possible 475. plFiberPlate : 24 possible sky positions to use as objects from a possible 474. plFiberPlate : 20 possible sky positions to use as objects from a possible 473. plFiberPlate : 15 possible sky positions to use as objects from a possible 472. plFiberPlate : 6 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 29 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 70 possible sky positions to use as objects from a possible 466. plFiberPlate : 7 possible sky positions to use as objects from a possible 465. plFiberPlate : 7 possible sky positions to use as objects from a possible 464. plFiberPlate : 10 possible sky positions to use as objects from a possible 463. plFiberPlate : 10 possible sky positions to use as objects from a possible 462. plFiberPlate : 9 possible sky positions to use as objects from a possible 461. plFiberPlate : 8 possible sky positions to use as objects from a possible 460. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1587.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1588.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1588.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1589.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 58 2 10 31 3 18 66 4 23 105 5 16 128 6 12 98 7 18 92 8 23 114 9 20 86 10 31 106 11 15 59 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3635 40 3 151 78 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 162 67 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 164 81 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 149 32 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 150 63 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 157 116 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 161 23 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 146 163 plFiberPlate : 116 possible sky positions to use as objects from a possible 496. plFiberPlate : 87 possible sky positions to use as objects from a possible 495. plFiberPlate : 66 possible sky positions to use as objects from a possible 494. plFiberPlate : 31 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 6 possible sky positions to use as objects from a possible 491. plFiberPlate : 26 possible sky positions to use as objects from a possible 490. plFiberPlate : 47 possible sky positions to use as objects from a possible 489. plFiberPlate : 41 possible sky positions to use as objects from a possible 488. plFiberPlate : 21 possible sky positions to use as objects from a possible 487. plFiberPlate : 7 possible sky positions to use as objects from a possible 486. plFiberPlate : 1 possible sky positions to use as objects from a possible 485. plFiberPlate : 2 possible sky positions to use as objects from a possible 484. plFiberPlate : 1 possible sky positions to use as objects from a possible 483. plFiberPlate : 7 possible sky positions to use as objects from a possible 482. plFiberPlate : 22 possible sky positions to use as objects from a possible 481. plFiberPlate : 39 possible sky positions to use as objects from a possible 480. plFiberPlate : 23 possible sky positions to use as objects from a possible 479. plFiberPlate : 15 possible sky positions to use as objects from a possible 478. plFiberPlate : 5 possible sky positions to use as objects from a possible 477. plFiberPlate : 4 possible sky positions to use as objects from a possible 476. plFiberPlate : 1 possible sky positions to use as objects from a possible 475. plFiberPlate : 23 possible sky positions to use as objects from a possible 474. plFiberPlate : 16 possible sky positions to use as objects from a possible 473. plFiberPlate : 16 possible sky positions to use as objects from a possible 472. plFiberPlate : 34 possible sky positions to use as objects from a possible 471. plFiberPlate : 10 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 8 possible sky positions to use as objects from a possible 468. plFiberPlate : 14 possible sky positions to use as objects from a possible 467. plFiberPlate : 22 possible sky positions to use as objects from a possible 466. plFiberPlate : 21 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1588.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1589.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1589.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1590.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 69 2 5 45 3 13 86 4 23 117 5 13 128 6 9 103 7 8 93 8 12 96 9 12 93 10 16 138 11 7 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3644 40 5 178 76 plFiberPlate : adding spectro-photo std with objId = 3635 40 6 166 12 plFiberPlate : adding spectro-photo std with objId = 3704 40 2 34 107 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 178 97 plFiberPlate : adding spectro-photo std with objId = 3635 40 4 162 67 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 164 81 plFiberPlate : adding spectro-photo std with objId = 3635 40 5 157 116 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 161 23 plFiberPlate : 128 possible sky positions to use as objects from a possible 537. plFiberPlate : 109 possible sky positions to use as objects from a possible 536. plFiberPlate : 67 possible sky positions to use as objects from a possible 535. plFiberPlate : 22 possible sky positions to use as objects from a possible 534. plFiberPlate : 18 possible sky positions to use as objects from a possible 533. plFiberPlate : 6 possible sky positions to use as objects from a possible 532. plFiberPlate : 36 possible sky positions to use as objects from a possible 531. plFiberPlate : 49 possible sky positions to use as objects from a possible 530. plFiberPlate : 30 possible sky positions to use as objects from a possible 529. plFiberPlate : 16 possible sky positions to use as objects from a possible 528. plFiberPlate : 13 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 7 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 7 possible sky positions to use as objects from a possible 523. plFiberPlate : 13 possible sky positions to use as objects from a possible 522. plFiberPlate : 51 possible sky positions to use as objects from a possible 521. plFiberPlate : 19 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 4 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 20 possible sky positions to use as objects from a possible 513. plFiberPlate : 54 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 15 possible sky positions to use as objects from a possible 509. plFiberPlate : 7 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 27 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1589.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1590.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1590.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1591.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 61 2 8 24 3 14 62 4 17 95 5 16 124 6 13 93 7 10 86 8 14 106 9 11 92 10 21 104 11 12 57 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 180 13 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 38 104 plFiberPlate : adding spectro-photo std with objId = 3704 40 2 34 107 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 48 47 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 178 97 plFiberPlate : adding spectro-photo std with objId = 3644 40 4 183 57 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 45 60 plFiberPlate : adding spectro-photo std with objId = 3644 40 3 184 11 plFiberPlate : 98 possible sky positions to use as objects from a possible 484. plFiberPlate : 80 possible sky positions to use as objects from a possible 483. plFiberPlate : 43 possible sky positions to use as objects from a possible 482. plFiberPlate : 25 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 18 possible sky positions to use as objects from a possible 479. plFiberPlate : 33 possible sky positions to use as objects from a possible 478. plFiberPlate : 40 possible sky positions to use as objects from a possible 477. plFiberPlate : 28 possible sky positions to use as objects from a possible 476. plFiberPlate : 18 possible sky positions to use as objects from a possible 475. plFiberPlate : 6 possible sky positions to use as objects from a possible 474. plFiberPlate : 13 possible sky positions to use as objects from a possible 473. plFiberPlate : 8 possible sky positions to use as objects from a possible 472. plFiberPlate : 11 possible sky positions to use as objects from a possible 471. plFiberPlate : 10 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 40 possible sky positions to use as objects from a possible 468. plFiberPlate : 28 possible sky positions to use as objects from a possible 467. plFiberPlate : 22 possible sky positions to use as objects from a possible 466. plFiberPlate : 12 possible sky positions to use as objects from a possible 465. plFiberPlate : 8 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : 10 possible sky positions to use as objects from a possible 462. plFiberPlate : 17 possible sky positions to use as objects from a possible 461. plFiberPlate : 12 possible sky positions to use as objects from a possible 460. plFiberPlate : 56 possible sky positions to use as objects from a possible 459. plFiberPlate : 7 possible sky positions to use as objects from a possible 458. plFiberPlate : 1 possible sky positions to use as objects from a possible 457. plFiberPlate : 19 possible sky positions to use as objects from a possible 456. plFiberPlate : 13 possible sky positions to use as objects from a possible 455. plFiberPlate : 3 possible sky positions to use as objects from a possible 454. plFiberPlate : 24 possible sky positions to use as objects from a possible 453. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1590.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1591.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1591.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1592.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 78 2 5 50 3 6 95 4 14 127 5 17 131 6 9 97 7 10 82 8 13 98 9 11 99 10 10 163 11 11 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 64 12 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 16 60 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 50 25 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 15 102 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 20 16 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 23 36 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 23 34 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 51 41 plFiberPlate : 140 possible sky positions to use as objects from a possible 565. plFiberPlate : 100 possible sky positions to use as objects from a possible 564. plFiberPlate : 50 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 13 possible sky positions to use as objects from a possible 561. plFiberPlate : 23 possible sky positions to use as objects from a possible 560. plFiberPlate : 40 possible sky positions to use as objects from a possible 559. plFiberPlate : 70 possible sky positions to use as objects from a possible 558. plFiberPlate : 43 possible sky positions to use as objects from a possible 557. plFiberPlate : 43 possible sky positions to use as objects from a possible 556. plFiberPlate : 23 possible sky positions to use as objects from a possible 555. plFiberPlate : 22 possible sky positions to use as objects from a possible 554. plFiberPlate : 22 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 64 possible sky positions to use as objects from a possible 549. plFiberPlate : 49 possible sky positions to use as objects from a possible 548. plFiberPlate : 31 possible sky positions to use as objects from a possible 547. plFiberPlate : 14 possible sky positions to use as objects from a possible 546. plFiberPlate : 6 possible sky positions to use as objects from a possible 545. plFiberPlate : 6 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 60 possible sky positions to use as objects from a possible 540. plFiberPlate : 5 possible sky positions to use as objects from a possible 539. plFiberPlate : 4 possible sky positions to use as objects from a possible 538. plFiberPlate : 1 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1591.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1592.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1592.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1593.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 80 2 4 44 3 2 73 4 12 106 5 13 133 6 19 109 7 11 91 8 5 88 9 9 94 10 13 133 11 10 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 31 42 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 67 47 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 76 46 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 82 96 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 80 122 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 80 80 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 47 28 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 38 30 plFiberPlate : 128 possible sky positions to use as objects from a possible 527. plFiberPlate : 78 possible sky positions to use as objects from a possible 526. plFiberPlate : 62 possible sky positions to use as objects from a possible 525. plFiberPlate : 47 possible sky positions to use as objects from a possible 524. plFiberPlate : 21 possible sky positions to use as objects from a possible 523. plFiberPlate : 30 possible sky positions to use as objects from a possible 522. plFiberPlate : 40 possible sky positions to use as objects from a possible 521. plFiberPlate : 56 possible sky positions to use as objects from a possible 520. plFiberPlate : 46 possible sky positions to use as objects from a possible 519. plFiberPlate : 31 possible sky positions to use as objects from a possible 518. plFiberPlate : 18 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 13 possible sky positions to use as objects from a possible 514. plFiberPlate : 5 possible sky positions to use as objects from a possible 513. plFiberPlate : 21 possible sky positions to use as objects from a possible 512. plFiberPlate : 53 possible sky positions to use as objects from a possible 511. plFiberPlate : 27 possible sky positions to use as objects from a possible 510. plFiberPlate : 18 possible sky positions to use as objects from a possible 509. plFiberPlate : 6 possible sky positions to use as objects from a possible 508. plFiberPlate : 4 possible sky positions to use as objects from a possible 507. plFiberPlate : 7 possible sky positions to use as objects from a possible 506. plFiberPlate : 2 possible sky positions to use as objects from a possible 505. plFiberPlate : 12 possible sky positions to use as objects from a possible 504. plFiberPlate : 14 possible sky positions to use as objects from a possible 503. plFiberPlate : 75 possible sky positions to use as objects from a possible 502. plFiberPlate : 38 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 10 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 25 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1592.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1593.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1593.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1594.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 81 2 3 50 3 4 64 4 14 94 5 10 117 6 12 90 7 4 101 8 9 113 9 8 104 10 21 122 11 9 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 85 33 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 98 31 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 57 130 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 80 122 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 56 26 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 55 38 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 60 86 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 47 28 plFiberPlate : 101 possible sky positions to use as objects from a possible 532. plFiberPlate : 85 possible sky positions to use as objects from a possible 531. plFiberPlate : 60 possible sky positions to use as objects from a possible 530. plFiberPlate : 43 possible sky positions to use as objects from a possible 529. plFiberPlate : 25 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 43 possible sky positions to use as objects from a possible 526. plFiberPlate : 53 possible sky positions to use as objects from a possible 525. plFiberPlate : 28 possible sky positions to use as objects from a possible 524. plFiberPlate : 21 possible sky positions to use as objects from a possible 523. plFiberPlate : 14 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 6 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 8 possible sky positions to use as objects from a possible 517. plFiberPlate : 60 possible sky positions to use as objects from a possible 516. plFiberPlate : 55 possible sky positions to use as objects from a possible 515. plFiberPlate : 32 possible sky positions to use as objects from a possible 514. plFiberPlate : 21 possible sky positions to use as objects from a possible 513. plFiberPlate : 10 possible sky positions to use as objects from a possible 512. plFiberPlate : 18 possible sky positions to use as objects from a possible 511. plFiberPlate : 8 possible sky positions to use as objects from a possible 510. plFiberPlate : 18 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : 36 possible sky positions to use as objects from a possible 507. plFiberPlate : 34 possible sky positions to use as objects from a possible 506. plFiberPlate : 10 possible sky positions to use as objects from a possible 505. plFiberPlate : 13 possible sky positions to use as objects from a possible 504. plFiberPlate : 22 possible sky positions to use as objects from a possible 503. plFiberPlate : 17 possible sky positions to use as objects from a possible 502. plFiberPlate : 19 possible sky positions to use as objects from a possible 501. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1593.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1594.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1594.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1595.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 81 2 7 53 3 11 76 4 12 117 5 10 135 6 10 106 7 6 89 8 6 107 9 8 108 10 15 131 11 11 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 101 10 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 71 11 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 61 105 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 68 14 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 98 31 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 108 24 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 77 20 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 60 86 plFiberPlate : 123 possible sky positions to use as objects from a possible 547. plFiberPlate : 82 possible sky positions to use as objects from a possible 546. plFiberPlate : 49 possible sky positions to use as objects from a possible 545. plFiberPlate : 29 possible sky positions to use as objects from a possible 544. plFiberPlate : 20 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : 38 possible sky positions to use as objects from a possible 541. plFiberPlate : 63 possible sky positions to use as objects from a possible 540. plFiberPlate : 49 possible sky positions to use as objects from a possible 539. plFiberPlate : 18 possible sky positions to use as objects from a possible 538. plFiberPlate : 5 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 60 possible sky positions to use as objects from a possible 531. plFiberPlate : 46 possible sky positions to use as objects from a possible 530. plFiberPlate : 39 possible sky positions to use as objects from a possible 529. plFiberPlate : 23 possible sky positions to use as objects from a possible 528. plFiberPlate : 17 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 20 possible sky positions to use as objects from a possible 525. plFiberPlate : 8 possible sky positions to use as objects from a possible 524. plFiberPlate : 4 possible sky positions to use as objects from a possible 523. plFiberPlate : 22 possible sky positions to use as objects from a possible 522. plFiberPlate : 55 possible sky positions to use as objects from a possible 521. plFiberPlate : 9 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 20 possible sky positions to use as objects from a possible 518. plFiberPlate : 37 possible sky positions to use as objects from a possible 517. plFiberPlate : 15 possible sky positions to use as objects from a possible 516. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1594.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1595.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1595.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.09.2/plPlugMapP-1596.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 94 2 5 47 3 7 63 4 8 107 5 8 125 6 5 102 7 3 88 8 10 113 9 5 97 10 14 129 11 11 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 124 151 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 120 74 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 112 48 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 78 63 plFiberPlate : adding spectro-photo std with objId = 3647 40 1 76 62 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 77 20 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 121 18 plFiberPlate : adding spectro-photo std with objId = 3704 40 3 116 61 plFiberPlate : 108 possible sky positions to use as objects from a possible 537. plFiberPlate : 58 possible sky positions to use as objects from a possible 536. plFiberPlate : 34 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 42 possible sky positions to use as objects from a possible 532. plFiberPlate : 36 possible sky positions to use as objects from a possible 531. plFiberPlate : 59 possible sky positions to use as objects from a possible 530. plFiberPlate : 44 possible sky positions to use as objects from a possible 529. plFiberPlate : 16 possible sky positions to use as objects from a possible 528. plFiberPlate : 8 possible sky positions to use as objects from a possible 527. plFiberPlate : 5 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 13 possible sky positions to use as objects from a possible 524. plFiberPlate : 15 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : 48 possible sky positions to use as objects from a possible 521. plFiberPlate : 30 possible sky positions to use as objects from a possible 520. plFiberPlate : 19 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 5 possible sky positions to use as objects from a possible 517. plFiberPlate : 10 possible sky positions to use as objects from a possible 516. plFiberPlate : 7 possible sky positions to use as objects from a possible 515. plFiberPlate : 9 possible sky positions to use as objects from a possible 514. plFiberPlate : 34 possible sky positions to use as objects from a possible 513. plFiberPlate : 62 possible sky positions to use as objects from a possible 512. plFiberPlate : 27 possible sky positions to use as objects from a possible 511. plFiberPlate : 5 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 8 possible sky positions to use as objects from a possible 508. plFiberPlate : 6 possible sky positions to use as objects from a possible 507. plFiberPlate : 34 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1595.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1596.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.09.2/plOverlay-1596.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Sep 3 15:15:04 CDT 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_62/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_62/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 650 (obj/q/guide), 11 (light traps), 10 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1582.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1582.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1582.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1583.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0104,-6.4944) and (-11.26,-5.55) plMakeFanucCodes : fixed path between (-5.8489,11.2954) and (-4.11,12.00) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1583.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1583.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1584.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1584.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.5917,5.2511) and (0.05,12.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1584.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1585.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6297,-4.5673) and (-12.32,-3.38) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1585.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1585.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1586.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.6738,9.4038) and (7.63,10.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1586.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1586.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1587.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1587.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1587.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1588.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1588.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1588.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1589.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1589.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1589.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1590.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7955,10.4312) and (-3.50,11.69) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1590.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1590.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1591.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7753,4.9043) and (12.36,2.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1591.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1591.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1592.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1592.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1592.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1593.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1593.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1593.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1594.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.1777,11.6336) and (4.05,12.06) plMakeFanucCodes : fixed path between (-4.5459,11.5046) and (-2.54,12.35) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1594.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1594.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1595.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1595.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1595.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1596.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3144,-2.3038) and (-12.77,-0.84) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1596.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.09.2/plFanuc-1596.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Sep 3 15:15:44 CDT 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_62/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_62/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8b86c2c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1582 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1583 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1584 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1585 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1586 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1587 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1588 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1589 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1590 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1591 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1592 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1593 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1594 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1595 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1596 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Sep 3 15:15:55 CDT 2003 Begin running "plateEnder dr2003.09.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_62/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_62/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.09.2 -morePipes 1" failed. PS: Read file for stderr output of this job.