Sender: LSF System Subject: Job 106872: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Oct 29 13:59:16 2003 Results reported at Wed Oct 29 13:59:53 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_93 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.11.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 31.71 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Oct 29 13:59:17 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Oct 29 13:59:17 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_93/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed Oct 29 13:59:17 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_93/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_rnyca2 --------------------------------------------------------------- --------------------------------------------------------------- Wed Oct 29 13:59:17 CST 2003 Begin running plate --------------------------------------------------------------- Wed Oct 29 13:59:17 CST 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8b76c6c makePlates : beginning loop over plObs chain; makePlates : making 4 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapT-9487.par makePlates : plateInfo struct for plate 1638 : (h4).mjd 52997 (h4).raCen 65.25 (h4).decCen 28 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 65.250 28.000 65.250 29.500 plMakePlateFromTile : mjd of obs : 52997.696393 Observed HA/dec of plate center, fiducial point (deg) : 23.998 28.013 23.997 29.513 The rotation angle of the fid. point is -71.050466 plMakePlateFromTile : beginning loop over 988 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-34.10, -142.00, 7.5) and (-31.24, -141.28, 5.1) checkLTHo : distance = 2.951, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-34.10, -142.00, 7.5) makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapT-9486.par makePlates : plateInfo struct for plate 1639 : (h4).mjd 52997 (h4).raCen 67.5 (h4).decCen 25.5 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 67.500 25.500 67.500 27.000 plMakePlateFromTile : mjd of obs : 52997.697082 Observed HA/dec of plate center, fiducial point (deg) : 21.998 25.513 21.997 27.013 The rotation angle of the fid. point is -64.084626 plMakePlateFromTile : beginning loop over 971 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapT-9485.par makePlates : plateInfo struct for plate 1640 : (h4).mjd 52997 (h4).raCen 70 (h4).decCen 25.5 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 70.000 25.500 70.000 27.000 plMakePlateFromTile : mjd of obs : 52997.698466 Observed HA/dec of plate center, fiducial point (deg) : 19.998 25.512 19.997 27.012 The rotation angle of the fid. point is -62.684445 plMakePlateFromTile : beginning loop over 955 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapT-9484.par makePlates : plateInfo struct for plate 1641 : (h4).mjd 52997 (h4).raCen 72 (h4).decCen 25.5 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 72.000 25.500 72.000 27.000 plMakePlateFromTile : mjd of obs : 52997.698465 Observed HA/dec of plate center, fiducial point (deg) : 17.998 25.511 17.997 27.011 The rotation angle of the fid. point is -60.933412 plMakePlateFromTile : beginning loop over 991 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Oct 29 13:59:22 CST 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 4 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapP-1638.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 63 2 3 59 3 8 45 4 8 49 5 0 73 6 8 53 7 20 19 8 13 47 9 13 48 10 4 83 11 1 57 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3557 137 3 51 351 plFiberPlate : adding spectro-photo std with objId = 3557 137 1 51 142 plFiberPlate : adding spectro-photo std with objId = 3511 137 4 28 41 plFiberPlate : adding spectro-photo std with objId = 3511 137 5 28 19 plFiberPlate : adding spectro-photo std with objId = 3511 137 6 23 466 plFiberPlate : adding spectro-photo std with objId = 3557 137 4 41 14 plFiberPlate : adding spectro-photo std with objId = 3557 137 6 40 186 plFiberPlate : adding spectro-photo std with objId = 3557 137 6 40 164 plFiberPlate : 54 possible sky positions to use as objects from a possible 300. plFiberPlate : 39 possible sky positions to use as objects from a possible 299. plFiberPlate : 27 possible sky positions to use as objects from a possible 298. plFiberPlate : 14 possible sky positions to use as objects from a possible 297. plFiberPlate : 22 possible sky positions to use as objects from a possible 296. plFiberPlate : 27 possible sky positions to use as objects from a possible 295. plFiberPlate : 31 possible sky positions to use as objects from a possible 294. plFiberPlate : 41 possible sky positions to use as objects from a possible 293. plFiberPlate : 26 possible sky positions to use as objects from a possible 292. plFiberPlate : 16 possible sky positions to use as objects from a possible 291. plFiberPlate : 5 possible sky positions to use as objects from a possible 290. plFiberPlate : 11 possible sky positions to use as objects from a possible 289. plFiberPlate : 5 possible sky positions to use as objects from a possible 288. plFiberPlate : 12 possible sky positions to use as objects from a possible 287. plFiberPlate : 12 possible sky positions to use as objects from a possible 286. plFiberPlate : 7 possible sky positions to use as objects from a possible 285. plFiberPlate : 41 possible sky positions to use as objects from a possible 284. plFiberPlate : 33 possible sky positions to use as objects from a possible 283. plFiberPlate : 20 possible sky positions to use as objects from a possible 282. plFiberPlate : 5 possible sky positions to use as objects from a possible 281. plFiberPlate : 4 possible sky positions to use as objects from a possible 280. plFiberPlate : 5 possible sky positions to use as objects from a possible 279. plFiberPlate : 10 possible sky positions to use as objects from a possible 278. plFiberPlate : 6 possible sky positions to use as objects from a possible 277. plFiberPlate : 17 possible sky positions to use as objects from a possible 276. plFiberPlate : 27 possible sky positions to use as objects from a possible 275. plFiberPlate : 10 possible sky positions to use as objects from a possible 274. plFiberPlate : 7 possible sky positions to use as objects from a possible 273. plFiberPlate : 2 possible sky positions to use as objects from a possible 272. plFiberPlate : 1 possible sky positions to use as objects from a possible 271. plFiberPlate : 3 possible sky positions to use as objects from a possible 270. plFiberPlate : 3 possible sky positions to use as objects from a possible 269. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1638.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1638.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapP-1639.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 61 2 2 49 3 3 56 4 8 64 5 9 73 6 3 37 7 1 30 8 0 53 9 2 46 10 14 83 11 12 58 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 8 at 227.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3511 137 2 15 156 plFiberPlate : adding spectro-photo std with objId = 3559 137 5 39 196 plFiberPlate : adding spectro-photo std with objId = 3559 137 4 34 90 plFiberPlate : adding spectro-photo std with objId = 3559 137 4 38 144 plFiberPlate : adding spectro-photo std with objId = 3512 137 3 40 152 plFiberPlate : adding spectro-photo std with objId = 3512 137 3 33 125 plFiberPlate : adding spectro-photo std with objId = 3559 137 1 39 12 plFiberPlate : adding spectro-photo std with objId = 3559 137 1 37 50 plFiberPlate : 61 possible sky positions to use as objects from a possible 300. plFiberPlate : 54 possible sky positions to use as objects from a possible 299. plFiberPlate : 48 possible sky positions to use as objects from a possible 298. plFiberPlate : 33 possible sky positions to use as objects from a possible 297. plFiberPlate : 14 possible sky positions to use as objects from a possible 296. plFiberPlate : 19 possible sky positions to use as objects from a possible 295. plFiberPlate : 23 possible sky positions to use as objects from a possible 294. plFiberPlate : 29 possible sky positions to use as objects from a possible 293. plFiberPlate : 25 possible sky positions to use as objects from a possible 292. plFiberPlate : 25 possible sky positions to use as objects from a possible 291. plFiberPlate : 20 possible sky positions to use as objects from a possible 290. plFiberPlate : 17 possible sky positions to use as objects from a possible 289. plFiberPlate : 10 possible sky positions to use as objects from a possible 288. plFiberPlate : 2 possible sky positions to use as objects from a possible 287. plFiberPlate : 3 possible sky positions to use as objects from a possible 286. plFiberPlate : 7 possible sky positions to use as objects from a possible 285. plFiberPlate : 31 possible sky positions to use as objects from a possible 284. plFiberPlate : 29 possible sky positions to use as objects from a possible 283. plFiberPlate : 28 possible sky positions to use as objects from a possible 282. plFiberPlate : 18 possible sky positions to use as objects from a possible 281. plFiberPlate : 8 possible sky positions to use as objects from a possible 280. plFiberPlate : 5 possible sky positions to use as objects from a possible 279. plFiberPlate : 7 possible sky positions to use as objects from a possible 278. plFiberPlate : 7 possible sky positions to use as objects from a possible 277. plFiberPlate : 9 possible sky positions to use as objects from a possible 276. plFiberPlate : 32 possible sky positions to use as objects from a possible 275. plFiberPlate : 23 possible sky positions to use as objects from a possible 274. plFiberPlate : 16 possible sky positions to use as objects from a possible 273. plFiberPlate : 8 possible sky positions to use as objects from a possible 272. plFiberPlate : 3 possible sky positions to use as objects from a possible 271. plFiberPlate : 10 possible sky positions to use as objects from a possible 270. plFiberPlate : 7 possible sky positions to use as objects from a possible 269. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1638.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1639.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1639.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapP-1640.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 70 2 2 47 3 4 38 4 3 55 5 0 71 6 0 38 7 6 28 8 6 46 9 3 59 10 2 84 11 2 68 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3512 137 6 48 144 plFiberPlate : adding spectro-photo std with objId = 3559 137 5 62 284 plFiberPlate : adding spectro-photo std with objId = 3559 137 4 54 18 plFiberPlate : adding spectro-photo std with objId = 3512 137 4 45 153 plFiberPlate : adding spectro-photo std with objId = 3512 137 3 47 97 plFiberPlate : adding spectro-photo std with objId = 3512 137 3 45 161 plFiberPlate : adding spectro-photo std with objId = 3559 137 1 52 35 plFiberPlate : adding spectro-photo std with objId = 3512 137 1 52 146 plFiberPlate : 65 possible sky positions to use as objects from a possible 300. plFiberPlate : 54 possible sky positions to use as objects from a possible 299. plFiberPlate : 31 possible sky positions to use as objects from a possible 298. plFiberPlate : 19 possible sky positions to use as objects from a possible 297. plFiberPlate : 19 possible sky positions to use as objects from a possible 296. plFiberPlate : 17 possible sky positions to use as objects from a possible 295. plFiberPlate : 42 possible sky positions to use as objects from a possible 294. plFiberPlate : 46 possible sky positions to use as objects from a possible 293. plFiberPlate : 45 possible sky positions to use as objects from a possible 292. plFiberPlate : 34 possible sky positions to use as objects from a possible 291. plFiberPlate : 15 possible sky positions to use as objects from a possible 290. plFiberPlate : 8 possible sky positions to use as objects from a possible 289. plFiberPlate : 9 possible sky positions to use as objects from a possible 288. plFiberPlate : 8 possible sky positions to use as objects from a possible 287. plFiberPlate : 2 possible sky positions to use as objects from a possible 286. plFiberPlate : 28 possible sky positions to use as objects from a possible 285. plFiberPlate : 49 possible sky positions to use as objects from a possible 284. plFiberPlate : 40 possible sky positions to use as objects from a possible 283. plFiberPlate : 28 possible sky positions to use as objects from a possible 282. plFiberPlate : 18 possible sky positions to use as objects from a possible 281. plFiberPlate : 11 possible sky positions to use as objects from a possible 280. plFiberPlate : 11 possible sky positions to use as objects from a possible 279. plFiberPlate : 2 possible sky positions to use as objects from a possible 278. plFiberPlate : 8 possible sky positions to use as objects from a possible 277. plFiberPlate : 26 possible sky positions to use as objects from a possible 276. plFiberPlate : 27 possible sky positions to use as objects from a possible 275. plFiberPlate : 20 possible sky positions to use as objects from a possible 274. plFiberPlate : 15 possible sky positions to use as objects from a possible 273. plFiberPlate : 7 possible sky positions to use as objects from a possible 272. plFiberPlate : 6 possible sky positions to use as objects from a possible 271. plFiberPlate : 3 possible sky positions to use as objects from a possible 270. plFiberPlate : 8 possible sky positions to use as objects from a possible 269. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1639.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1640.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1640.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.2/plPlugMapP-1641.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 55 2 11 48 3 7 52 4 3 72 5 9 57 6 9 20 7 5 23 8 3 56 9 7 47 10 5 97 11 7 60 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3512 137 6 65 67 plFiberPlate : adding spectro-photo std with objId = 3559 137 5 66 18 plFiberPlate : adding spectro-photo std with objId = 3559 137 4 77 37 plFiberPlate : adding spectro-photo std with objId = 3559 137 4 64 191 plFiberPlate : adding spectro-photo std with objId = 3512 137 3 71 300 plFiberPlate : adding spectro-photo std with objId = 3512 137 3 73 51 plFiberPlate : adding spectro-photo std with objId = 3559 137 1 70 183 plFiberPlate : adding spectro-photo std with objId = 3512 137 1 66 86 plFiberPlate : 84 possible sky positions to use as objects from a possible 300. plFiberPlate : 46 possible sky positions to use as objects from a possible 299. plFiberPlate : 29 possible sky positions to use as objects from a possible 298. plFiberPlate : 12 possible sky positions to use as objects from a possible 297. plFiberPlate : 17 possible sky positions to use as objects from a possible 296. plFiberPlate : 30 possible sky positions to use as objects from a possible 295. plFiberPlate : 13 possible sky positions to use as objects from a possible 294. plFiberPlate : 51 possible sky positions to use as objects from a possible 293. plFiberPlate : 43 possible sky positions to use as objects from a possible 292. plFiberPlate : 30 possible sky positions to use as objects from a possible 291. plFiberPlate : 14 possible sky positions to use as objects from a possible 290. plFiberPlate : 16 possible sky positions to use as objects from a possible 289. plFiberPlate : 7 possible sky positions to use as objects from a possible 288. plFiberPlate : 3 possible sky positions to use as objects from a possible 287. plFiberPlate : 3 possible sky positions to use as objects from a possible 286. plFiberPlate : 5 possible sky positions to use as objects from a possible 285. plFiberPlate : 34 possible sky positions to use as objects from a possible 284. plFiberPlate : 25 possible sky positions to use as objects from a possible 283. plFiberPlate : 17 possible sky positions to use as objects from a possible 282. plFiberPlate : 12 possible sky positions to use as objects from a possible 281. plFiberPlate : 6 possible sky positions to use as objects from a possible 280. plFiberPlate : 4 possible sky positions to use as objects from a possible 279. plFiberPlate : 7 possible sky positions to use as objects from a possible 278. plFiberPlate : 8 possible sky positions to use as objects from a possible 277. plFiberPlate : 10 possible sky positions to use as objects from a possible 276. plFiberPlate : 24 possible sky positions to use as objects from a possible 275. plFiberPlate : 17 possible sky positions to use as objects from a possible 274. plFiberPlate : 8 possible sky positions to use as objects from a possible 273. plFiberPlate : 6 possible sky positions to use as objects from a possible 272. plFiberPlate : 6 possible sky positions to use as objects from a possible 271. plFiberPlate : 11 possible sky positions to use as objects from a possible 270. plFiberPlate : 7 possible sky positions to use as objects from a possible 269. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 686 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1640.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1641.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.2/plOverlay-1641.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Oct 29 13:59:27 CST 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 4 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1638.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.9264,-9.9695) and (5.56,-10.96) plMakeFanucCodes : fixed path between (-5.4124,11.5920) and (-3.68,12.07) plMakeFanucCodes : fixed path between (-2.6042,12.4267) and (-1.11,12.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1638.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7435,-9.6772) and (-12.28,-0.26) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1638.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 4 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1639.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7397,-6.5494) and (-11.60,-5.27) plMakeFanucCodes : fixed path between (-8.1237,9.8164) and (-7.03,10.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1639.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1639.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1640.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.1281,3.7964) and (-12.44,2.87) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1640.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1640.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 24 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1641.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1641.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.2/plFanuc-1641.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Oct 29 13:59:40 CST 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bba8bc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 4 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1638 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1639 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1640 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1641 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 686 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Oct 29 13:59:43 CST 2003 Begin running "plateEnder dr2003.11.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Oct 29 13:59:52 CST 2003 ALL DONE PS: Read file for stderr output of this job.