Sender: LSF System Subject: Job 108638: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Dec 1 10:55:14 2003 Results reported at Mon Dec 1 10:56:44 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_101 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.12.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 74.47 sec. Max Memory : 11 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Dec 1 10:55:16 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Dec 1 10:55:19 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_101/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Mon Dec 1 10:55:19 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_101/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_B4U8gd --------------------------------------------------------------- --------------------------------------------------------------- Mon Dec 1 10:55:19 CST 2003 Begin running plate --------------------------------------------------------------- Mon Dec 1 10:55:19 CST 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bbaadc makePlates : beginning loop over plObs chain; makePlates : making 7 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1196.par makePlates : plateInfo struct for plate 1687 : (h4).mjd 53063 (h4).raCen 255.7042 (h4).decCen 24.0786 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 255.704 24.079 255.704 25.579 plMakePlateFromTile : mjd of obs : 53063.894080 Observed HA/dec of plate center, fiducial point (deg) : -30.002 24.071 -30.002 25.570 The rotation angle of the fid. point is 64.827134 plMakePlateFromTile : beginning loop over 1392 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1197.par makePlates : plateInfo struct for plate 1688 : (h4).mjd 53063 (h4).raCen 256.4136 (h4).decCen 23.36737 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 256.414 23.367 256.414 24.867 plMakePlateFromTile : mjd of obs : 53063.893275 Observed HA/dec of plate center, fiducial point (deg) : -31.002 23.360 -31.002 24.860 The rotation angle of the fid. point is 63.967678 plMakePlateFromTile : beginning loop over 1373 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1198.par makePlates : plateInfo struct for plate 1689 : (h4).mjd 53063 (h4).raCen 257.2 (h4).decCen 22.37906 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 257.200 22.379 257.200 23.879 plMakePlateFromTile : mjd of obs : 53063.892683 Observed HA/dec of plate center, fiducial point (deg) : -32.002 22.373 -32.002 23.872 The rotation angle of the fid. point is 62.746558 plMakePlateFromTile : beginning loop over 1262 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1192.par makePlates : plateInfo struct for plate 1690 : (h4).mjd 53063 (h4).raCen 252.0906 (h4).decCen 27.9276 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 252.091 27.928 252.091 29.428 plMakePlateFromTile : mjd of obs : 53063.892380 Observed HA/dec of plate center, fiducial point (deg) : -27.002 27.917 -27.002 29.416 The rotation angle of the fid. point is 71.479801 plMakePlateFromTile : beginning loop over 1464 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1193.par makePlates : plateInfo struct for plate 1691 : (h4).mjd 53063 (h4).raCen 253.0412 (h4).decCen 27.09511 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.041 27.095 253.041 28.595 plMakePlateFromTile : mjd of obs : 53063.892243 Observed HA/dec of plate center, fiducial point (deg) : -28.002 27.085 -28.002 28.585 The rotation angle of the fid. point is 69.927091 plMakePlateFromTile : beginning loop over 1434 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1194.par makePlates : plateInfo struct for plate 1692 : (h4).mjd 53063 (h4).raCen 253.8336 (h4).decCen 26.10897 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.834 26.109 253.834 27.609 plMakePlateFromTile : mjd of obs : 53063.894439 Observed HA/dec of plate center, fiducial point (deg) : -28.002 26.100 -28.002 27.599 The rotation angle of the fid. point is 67.956860 plMakePlateFromTile : beginning loop over 1419 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk86/complete//plPlugMapT-1195.par makePlates : plateInfo struct for plate 1693 : (h4).mjd 53063 (h4).raCen 254.8834 (h4).decCen 25.21626 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.883 25.216 254.883 26.716 plMakePlateFromTile : mjd of obs : 53063.894577 Observed HA/dec of plate center, fiducial point (deg) : -29.002 25.208 -29.002 26.707 The rotation angle of the fid. point is 66.542162 plMakePlateFromTile : beginning loop over 1405 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Dec 1 10:55:33 CST 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 7 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1687.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 81 2 11 73 3 18 83 4 22 95 5 29 101 6 20 78 7 19 69 8 28 65 9 29 93 10 33 110 11 31 72 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 405 35 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 342 200 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 408 134 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 341 54 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 343 260 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 407 114 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 342 238 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 306 330 plFiberPlate : 104 possible sky positions to use as objects from a possible 469. plFiberPlate : 58 possible sky positions to use as objects from a possible 468. plFiberPlate : 29 possible sky positions to use as objects from a possible 467. plFiberPlate : 25 possible sky positions to use as objects from a possible 466. plFiberPlate : 11 possible sky positions to use as objects from a possible 465. plFiberPlate : 23 possible sky positions to use as objects from a possible 464. plFiberPlate : 30 possible sky positions to use as objects from a possible 463. plFiberPlate : 55 possible sky positions to use as objects from a possible 462. plFiberPlate : 44 possible sky positions to use as objects from a possible 461. plFiberPlate : 27 possible sky positions to use as objects from a possible 460. plFiberPlate : 11 possible sky positions to use as objects from a possible 459. plFiberPlate : 10 possible sky positions to use as objects from a possible 458. plFiberPlate : 9 possible sky positions to use as objects from a possible 457. plFiberPlate : 5 possible sky positions to use as objects from a possible 456. plFiberPlate : 7 possible sky positions to use as objects from a possible 455. plFiberPlate : 10 possible sky positions to use as objects from a possible 454. plFiberPlate : 56 possible sky positions to use as objects from a possible 453. plFiberPlate : 54 possible sky positions to use as objects from a possible 452. plFiberPlate : 33 possible sky positions to use as objects from a possible 451. plFiberPlate : 19 possible sky positions to use as objects from a possible 450. plFiberPlate : 20 possible sky positions to use as objects from a possible 449. plFiberPlate : 12 possible sky positions to use as objects from a possible 448. plFiberPlate : 6 possible sky positions to use as objects from a possible 447. plFiberPlate : 3 possible sky positions to use as objects from a possible 446. plFiberPlate : 12 possible sky positions to use as objects from a possible 445. plFiberPlate : 46 possible sky positions to use as objects from a possible 444. plFiberPlate : 25 possible sky positions to use as objects from a possible 443. plFiberPlate : 9 possible sky positions to use as objects from a possible 442. plFiberPlate : 7 possible sky positions to use as objects from a possible 441. plFiberPlate : 14 possible sky positions to use as objects from a possible 440. plFiberPlate : 10 possible sky positions to use as objects from a possible 439. plFiberPlate : 4 possible sky positions to use as objects from a possible 438. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1687.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1687.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1688.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 93 2 16 77 3 11 71 4 14 80 5 41 96 6 33 76 7 24 66 8 19 71 9 44 75 10 25 113 11 25 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 419 122 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 136 173 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 408 134 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 343 260 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 143 134 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 407 114 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 306 330 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 419 268 plFiberPlate : 89 possible sky positions to use as objects from a possible 460. plFiberPlate : 37 possible sky positions to use as objects from a possible 459. plFiberPlate : 15 possible sky positions to use as objects from a possible 458. plFiberPlate : 27 possible sky positions to use as objects from a possible 457. plFiberPlate : 14 possible sky positions to use as objects from a possible 456. plFiberPlate : 28 possible sky positions to use as objects from a possible 455. plFiberPlate : 34 possible sky positions to use as objects from a possible 454. plFiberPlate : 60 possible sky positions to use as objects from a possible 453. plFiberPlate : 56 possible sky positions to use as objects from a possible 452. plFiberPlate : 37 possible sky positions to use as objects from a possible 451. plFiberPlate : 26 possible sky positions to use as objects from a possible 450. plFiberPlate : 21 possible sky positions to use as objects from a possible 449. plFiberPlate : 16 possible sky positions to use as objects from a possible 448. plFiberPlate : 21 possible sky positions to use as objects from a possible 447. plFiberPlate : 14 possible sky positions to use as objects from a possible 446. plFiberPlate : 8 possible sky positions to use as objects from a possible 445. plFiberPlate : 44 possible sky positions to use as objects from a possible 444. plFiberPlate : 54 possible sky positions to use as objects from a possible 443. plFiberPlate : 26 possible sky positions to use as objects from a possible 442. plFiberPlate : 14 possible sky positions to use as objects from a possible 441. plFiberPlate : 13 possible sky positions to use as objects from a possible 440. plFiberPlate : 12 possible sky positions to use as objects from a possible 439. plFiberPlate : 8 possible sky positions to use as objects from a possible 438. plFiberPlate : 9 possible sky positions to use as objects from a possible 437. plFiberPlate : 5 possible sky positions to use as objects from a possible 436. plFiberPlate : 43 possible sky positions to use as objects from a possible 435. plFiberPlate : 31 possible sky positions to use as objects from a possible 434. plFiberPlate : 16 possible sky positions to use as objects from a possible 433. plFiberPlate : 8 possible sky positions to use as objects from a possible 432. plFiberPlate : 8 possible sky positions to use as objects from a possible 431. plFiberPlate : 25 possible sky positions to use as objects from a possible 430. plFiberPlate : 6 possible sky positions to use as objects from a possible 429. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1687.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1688.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1688.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1689.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 40 2 19 37 3 10 61 4 10 87 5 23 97 6 24 83 7 17 72 8 20 61 9 24 94 10 28 96 11 22 57 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 324 336 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 425 87 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 419 122 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 420 136 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 321 108 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 357 166 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 143 134 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 357 108 plFiberPlate : 87 possible sky positions to use as objects from a possible 395. plFiberPlate : 56 possible sky positions to use as objects from a possible 394. plFiberPlate : 30 possible sky positions to use as objects from a possible 393. plFiberPlate : 12 possible sky positions to use as objects from a possible 392. plFiberPlate : 12 possible sky positions to use as objects from a possible 391. plFiberPlate : 11 possible sky positions to use as objects from a possible 390. plFiberPlate : 13 possible sky positions to use as objects from a possible 389. plFiberPlate : 71 possible sky positions to use as objects from a possible 388. plFiberPlate : 40 possible sky positions to use as objects from a possible 387. plFiberPlate : 22 possible sky positions to use as objects from a possible 386. plFiberPlate : 16 possible sky positions to use as objects from a possible 385. plFiberPlate : 7 possible sky positions to use as objects from a possible 384. plFiberPlate : 5 possible sky positions to use as objects from a possible 383. plFiberPlate : 9 possible sky positions to use as objects from a possible 382. plFiberPlate : 9 possible sky positions to use as objects from a possible 381. plFiberPlate : 12 possible sky positions to use as objects from a possible 380. plFiberPlate : 46 possible sky positions to use as objects from a possible 379. plFiberPlate : 38 possible sky positions to use as objects from a possible 378. plFiberPlate : 19 possible sky positions to use as objects from a possible 377. plFiberPlate : 16 possible sky positions to use as objects from a possible 376. plFiberPlate : 5 possible sky positions to use as objects from a possible 375. plFiberPlate : 7 possible sky positions to use as objects from a possible 374. plFiberPlate : 6 possible sky positions to use as objects from a possible 373. plFiberPlate : 3 possible sky positions to use as objects from a possible 372. plFiberPlate : 8 possible sky positions to use as objects from a possible 371. plFiberPlate : 60 possible sky positions to use as objects from a possible 370. plFiberPlate : 41 possible sky positions to use as objects from a possible 369. plFiberPlate : 25 possible sky positions to use as objects from a possible 368. plFiberPlate : 23 possible sky positions to use as objects from a possible 367. plFiberPlate : 14 possible sky positions to use as objects from a possible 366. plFiberPlate : 11 possible sky positions to use as objects from a possible 365. plFiberPlate : 6 possible sky positions to use as objects from a possible 364. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1688.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1689.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1689.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1690.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 111 2 11 80 3 16 63 4 13 90 5 27 142 6 35 116 7 31 96 8 24 102 9 42 121 10 26 126 11 23 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 275 183 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 376 46 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 372 238 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 105 97 plFiberPlate : adding spectro-photo std with objId = 3185 0 4 103 2 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 312 179 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 365 197 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 375 60 plFiberPlate : 75 possible sky positions to use as objects from a possible 587. plFiberPlate : 58 possible sky positions to use as objects from a possible 586. plFiberPlate : 37 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 23 possible sky positions to use as objects from a possible 583. plFiberPlate : 34 possible sky positions to use as objects from a possible 582. plFiberPlate : 51 possible sky positions to use as objects from a possible 581. plFiberPlate : 62 possible sky positions to use as objects from a possible 580. plFiberPlate : 66 possible sky positions to use as objects from a possible 579. plFiberPlate : 55 possible sky positions to use as objects from a possible 578. plFiberPlate : 45 possible sky positions to use as objects from a possible 577. plFiberPlate : 40 possible sky positions to use as objects from a possible 576. plFiberPlate : 21 possible sky positions to use as objects from a possible 575. plFiberPlate : 21 possible sky positions to use as objects from a possible 574. plFiberPlate : 20 possible sky positions to use as objects from a possible 573. plFiberPlate : 36 possible sky positions to use as objects from a possible 572. plFiberPlate : 37 possible sky positions to use as objects from a possible 571. plFiberPlate : 34 possible sky positions to use as objects from a possible 570. plFiberPlate : 32 possible sky positions to use as objects from a possible 569. plFiberPlate : 24 possible sky positions to use as objects from a possible 568. plFiberPlate : 13 possible sky positions to use as objects from a possible 567. plFiberPlate : 5 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 23 possible sky positions to use as objects from a possible 563. plFiberPlate : 29 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 5 possible sky positions to use as objects from a possible 560. plFiberPlate : 11 possible sky positions to use as objects from a possible 559. plFiberPlate : 20 possible sky positions to use as objects from a possible 558. plFiberPlate : 10 possible sky positions to use as objects from a possible 557. plFiberPlate : 17 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1689.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1690.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1690.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1691.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 105 2 18 74 3 13 80 4 22 89 5 22 101 6 29 97 7 16 79 8 16 83 9 28 102 10 28 134 11 18 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 272 39 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 376 46 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 326 16 plFiberPlate : adding spectro-photo std with objId = 3185 0 4 103 2 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 281 30 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 374 172 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 312 179 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 375 60 plFiberPlate : 106 possible sky positions to use as objects from a possible 526. plFiberPlate : 89 possible sky positions to use as objects from a possible 525. plFiberPlate : 52 possible sky positions to use as objects from a possible 524. plFiberPlate : 20 possible sky positions to use as objects from a possible 523. plFiberPlate : 23 possible sky positions to use as objects from a possible 522. plFiberPlate : 28 possible sky positions to use as objects from a possible 521. plFiberPlate : 39 possible sky positions to use as objects from a possible 520. plFiberPlate : 57 possible sky positions to use as objects from a possible 519. plFiberPlate : 32 possible sky positions to use as objects from a possible 518. plFiberPlate : 34 possible sky positions to use as objects from a possible 517. plFiberPlate : 21 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : 14 possible sky positions to use as objects from a possible 511. plFiberPlate : 43 possible sky positions to use as objects from a possible 510. plFiberPlate : 31 possible sky positions to use as objects from a possible 509. plFiberPlate : 29 possible sky positions to use as objects from a possible 508. plFiberPlate : 22 possible sky positions to use as objects from a possible 507. plFiberPlate : 15 possible sky positions to use as objects from a possible 506. plFiberPlate : 19 possible sky positions to use as objects from a possible 505. plFiberPlate : 21 possible sky positions to use as objects from a possible 504. plFiberPlate : 13 possible sky positions to use as objects from a possible 503. plFiberPlate : 9 possible sky positions to use as objects from a possible 502. plFiberPlate : 71 possible sky positions to use as objects from a possible 501. plFiberPlate : 36 possible sky positions to use as objects from a possible 500. plFiberPlate : 25 possible sky positions to use as objects from a possible 499. plFiberPlate : 27 possible sky positions to use as objects from a possible 498. plFiberPlate : 9 possible sky positions to use as objects from a possible 497. plFiberPlate : 1 possible sky positions to use as objects from a possible 496. plFiberPlate : 6 possible sky positions to use as objects from a possible 495. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1690.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1691.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1691.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1692.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 99 2 16 88 3 11 81 4 13 85 5 24 114 6 13 86 7 16 74 8 25 90 9 29 87 10 25 127 11 17 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 391 273 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 321 80 plFiberPlate : adding spectro-photo std with objId = 3185 0 4 109 141 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 281 30 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 327 179 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 290 38 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 387 85 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 122 49 plFiberPlate : 111 possible sky positions to use as objects from a possible 527. plFiberPlate : 81 possible sky positions to use as objects from a possible 526. plFiberPlate : 54 possible sky positions to use as objects from a possible 525. plFiberPlate : 38 possible sky positions to use as objects from a possible 524. plFiberPlate : 28 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : 40 possible sky positions to use as objects from a possible 521. plFiberPlate : 80 possible sky positions to use as objects from a possible 520. plFiberPlate : 50 possible sky positions to use as objects from a possible 519. plFiberPlate : 31 possible sky positions to use as objects from a possible 518. plFiberPlate : 24 possible sky positions to use as objects from a possible 517. plFiberPlate : 20 possible sky positions to use as objects from a possible 516. plFiberPlate : 18 possible sky positions to use as objects from a possible 515. plFiberPlate : 9 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 13 possible sky positions to use as objects from a possible 512. plFiberPlate : 46 possible sky positions to use as objects from a possible 511. plFiberPlate : 43 possible sky positions to use as objects from a possible 510. plFiberPlate : 22 possible sky positions to use as objects from a possible 509. plFiberPlate : 15 possible sky positions to use as objects from a possible 508. plFiberPlate : 6 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 11 possible sky positions to use as objects from a possible 505. plFiberPlate : 19 possible sky positions to use as objects from a possible 504. plFiberPlate : 10 possible sky positions to use as objects from a possible 503. plFiberPlate : 60 possible sky positions to use as objects from a possible 502. plFiberPlate : 27 possible sky positions to use as objects from a possible 501. plFiberPlate : 12 possible sky positions to use as objects from a possible 500. plFiberPlate : 8 possible sky positions to use as objects from a possible 499. plFiberPlate : 11 possible sky positions to use as objects from a possible 498. plFiberPlate : 15 possible sky positions to use as objects from a possible 497. plFiberPlate : 5 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1691.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1692.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1692.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.2/plPlugMapP-1693.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 93 2 24 78 3 19 78 4 23 92 5 27 98 6 18 92 7 20 82 8 24 76 9 27 102 10 42 132 11 27 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 299 33 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 295 118 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 326 16 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 341 54 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 294 138 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 290 38 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 387 85 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 122 49 plFiberPlate : 100 possible sky positions to use as objects from a possible 501. plFiberPlate : 78 possible sky positions to use as objects from a possible 500. plFiberPlate : 41 possible sky positions to use as objects from a possible 499. plFiberPlate : 16 possible sky positions to use as objects from a possible 498. plFiberPlate : 27 possible sky positions to use as objects from a possible 497. plFiberPlate : 13 possible sky positions to use as objects from a possible 496. plFiberPlate : 39 possible sky positions to use as objects from a possible 495. plFiberPlate : 70 possible sky positions to use as objects from a possible 494. plFiberPlate : 57 possible sky positions to use as objects from a possible 493. plFiberPlate : 30 possible sky positions to use as objects from a possible 492. plFiberPlate : 14 possible sky positions to use as objects from a possible 491. plFiberPlate : 11 possible sky positions to use as objects from a possible 490. plFiberPlate : 11 possible sky positions to use as objects from a possible 489. plFiberPlate : 7 possible sky positions to use as objects from a possible 488. plFiberPlate : 14 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 52 possible sky positions to use as objects from a possible 485. plFiberPlate : 38 possible sky positions to use as objects from a possible 484. plFiberPlate : 21 possible sky positions to use as objects from a possible 483. plFiberPlate : 15 possible sky positions to use as objects from a possible 482. plFiberPlate : 12 possible sky positions to use as objects from a possible 481. plFiberPlate : 18 possible sky positions to use as objects from a possible 480. plFiberPlate : 10 possible sky positions to use as objects from a possible 479. plFiberPlate : 12 possible sky positions to use as objects from a possible 478. plFiberPlate : 6 possible sky positions to use as objects from a possible 477. plFiberPlate : 61 possible sky positions to use as objects from a possible 476. plFiberPlate : 40 possible sky positions to use as objects from a possible 475. plFiberPlate : 29 possible sky positions to use as objects from a possible 474. plFiberPlate : 14 possible sky positions to use as objects from a possible 473. plFiberPlate : 25 possible sky positions to use as objects from a possible 472. plFiberPlate : 24 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1692.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1693.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.2/plOverlay-1693.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Dec 1 10:55:47 CST 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 7 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1687.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1687.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1687.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1688.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1688.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1688.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1689.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.4692,-11.7007) and (-3.62,-12.26) plMakeFanucCodes : fixed path between (4.6194,11.9021) and (2.99,12.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1689.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1689.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1690.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.1144,7.5699) and (10.99,6.50) plMakeFanucCodes : fixed path between (11.8394,4.1153) and (12.48,2.85) plMakeFanucCodes : fixed path between (-3.8552,-12.1237) and (-2.95,-12.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1690.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1690.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1691.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1691.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1691.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1692.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7023,-5.1607) and (11.86,-4.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1692.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1692.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1693.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1693.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.2/plFanuc-1693.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Dec 1 10:56:12 CST 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8b77b64 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 7 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1687 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1688 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1689 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1690 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1691 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1692 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1693 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Dec 1 10:56:20 CST 2003 Begin running "plateEnder dr2003.12.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.12.2 -morePipes 1" failed. PS: Read file for stderr output of this job.