Sender: LSF System Subject: Job 118789: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sun Feb 29 14:07:04 2004 Results reported at Sun Feb 29 14:12:28 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_166 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.03.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 151.65 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Sun Feb 29 14:07:09 CST 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sun Feb 29 14:07:18 CST 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86/bin:/sdss/ups/prd/gcc/v2_95_2/Linux-2-4/bin:/sdss/ups/prd/dddebugger/v3_1_2/Linux-2/bin:/sdss/ups/prd/gnuplot/v3_5/Linux-2/bin:/sdss/ups/prd/gdb/v4_17/Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/target/v5_8/Linux/bin:/sdss/ups/prd/sdb/v4_0/Linux/bin:/sdss/ups/prd/basicSch/v4_0/Linux/bin:/sdss/ups/prd/photoSch/v5_6/Linux/bin:/sdss/ups/prd/ts/v5_8/Linux/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_166/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Sun Feb 29 14:07:18 CST 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux BASICSCH_DIR=/sdss/ups/prd/basicSch/v4_0/Linux DDDEBUGGER_DIR=/sdss/ups/prd/dddebugger/v3_1_2/Linux-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_166/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GCC_DIR=/sdss/ups/prd/gcc/v2_95_2/Linux-2-4 GDB_DIR=/sdss/ups/prd/gdb/v4_17/Linux-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 GNUPLOT_DIR=/sdss/ups/prd/gnuplot/v3_5/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL OBJECTIVITY_DIR=/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTOSCH_DIR=/sdss/ups/prd/photoSch/v5_6/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDB_DIR=/sdss/ups/prd/sdb/v4_0/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TARGET_DIR=/sdss/ups/prd/target/v5_8/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TS_DIR=/sdss/ups/prd/ts/v5_8/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_jMslhj --------------------------------------------------------------- --------------------------------------------------------------- Sun Feb 29 14:07:18 CST 2004 Begin running plate --------------------------------------------------------------- Sun Feb 29 14:07:18 CST 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bd9094 makePlates : beginning loop over plObs chain; makePlates : making 18 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1266.par makePlates : plateInfo struct for plate 1761 : (h4).mjd 53134 (h4).raCen 176.294 (h4).decCen 14.84395 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.294 14.844 176.294 16.344 plMakePlateFromTile : mjd of obs : 53134.491370 Observed HA/dec of plate center, fiducial point (deg) : -26.002 14.827 -26.003 16.327 The rotation angle of the fid. point is 48.166311 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1267.par makePlates : plateInfo struct for plate 1762 : (h4).mjd 53134 (h4).raCen 177.7949 (h4).decCen 14.85378 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.795 14.854 177.795 16.354 plMakePlateFromTile : mjd of obs : 53134.492757 Observed HA/dec of plate center, fiducial point (deg) : -27.002 14.837 -27.003 16.337 The rotation angle of the fid. point is 49.029432 plMakePlateFromTile : beginning loop over 1287 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1268.par makePlates : plateInfo struct for plate 1763 : (h4).mjd 53134 (h4).raCen 179.5161 (h4).decCen 14.91338 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 179.516 14.913 179.516 16.413 plMakePlateFromTile : mjd of obs : 53134.491982 Observed HA/dec of plate center, fiducial point (deg) : -29.002 14.897 -29.003 16.396 The rotation angle of the fid. point is 50.658962 plMakePlateFromTile : beginning loop over 1283 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1269.par makePlates : plateInfo struct for plate 1764 : (h4).mjd 53134 (h4).raCen 181.126 (h4).decCen 14.89508 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.126 14.895 181.126 16.395 plMakePlateFromTile : mjd of obs : 53134.490900 Observed HA/dec of plate center, fiducial point (deg) : -31.002 14.878 -31.002 16.378 The rotation angle of the fid. point is 52.013091 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1270.par makePlates : plateInfo struct for plate 1765 : (h4).mjd 53134 (h4).raCen 182.8352 (h4).decCen 14.94769 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.835 14.948 182.835 16.448 plMakePlateFromTile : mjd of obs : 53134.492863 Observed HA/dec of plate center, fiducial point (deg) : -32.002 14.931 -32.002 16.431 The rotation angle of the fid. point is 52.702865 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1271.par makePlates : plateInfo struct for plate 1766 : (h4).mjd 53134 (h4).raCen 184.2977 (h4).decCen 14.96564 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.298 14.966 184.298 16.466 plMakePlateFromTile : mjd of obs : 53134.491372 Observed HA/dec of plate center, fiducial point (deg) : -34.002 14.949 -34.002 16.449 The rotation angle of the fid. point is 53.868083 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1272.par makePlates : plateInfo struct for plate 1767 : (h4).mjd 53134 (h4).raCen 185.9531 (h4).decCen 14.95685 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 185.953 14.957 185.953 16.457 plMakePlateFromTile : mjd of obs : 53134.576317 Observed HA/dec of plate center, fiducial point (deg) : -5.002 14.939 -5.002 16.438 The rotation angle of the fid. point is 13.422897 plMakePlateFromTile : beginning loop over 1334 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1273.par makePlates : plateInfo struct for plate 1768 : (h4).mjd 53134 (h4).raCen 187.992 (h4).decCen 15.01578 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.992 15.016 187.992 16.516 plMakePlateFromTile : mjd of obs : 53134.576423 Observed HA/dec of plate center, fiducial point (deg) : -7.002 14.998 -7.002 16.497 The rotation angle of the fid. point is 18.461241 plMakePlateFromTile : beginning loop over 1287 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1274.par makePlates : plateInfo struct for plate 1769 : (h4).mjd 53134 (h4).raCen 190.0576 (h4).decCen 14.89832 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.058 14.898 190.058 16.398 plMakePlateFromTile : mjd of obs : 53134.695755 Observed HA/dec of plate center, fiducial point (deg) : 33.998 14.882 33.998 16.381 The rotation angle of the fid. point is -53.789632 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (274.79, -113.62, 7.2) and (275.02, -115.80, 7.7) checkLTHo : distance = 2.193, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(275.02, -115.80, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1275.par makePlates : plateInfo struct for plate 1770 : (h4).mjd 53134 (h4).raCen 192.3321 (h4).decCen 14.89579 (h4).haCen 32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.332 14.896 192.332 16.396 plMakePlateFromTile : mjd of obs : 53134.696513 Observed HA/dec of plate center, fiducial point (deg) : 31.998 14.879 31.998 16.379 The rotation angle of the fid. point is -52.639256 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-205.31, -113.27, 7.2) and (-205.11, -115.45, 7.7) checkLTHo : distance = 2.189, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-205.11, -115.45, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1276.par makePlates : plateInfo struct for plate 1771 : (h4).mjd 53134 (h4).raCen 194.754 (h4).decCen 14.71583 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.754 14.716 194.754 16.216 plMakePlateFromTile : mjd of obs : 53134.697680 Observed HA/dec of plate center, fiducial point (deg) : 29.998 14.699 29.998 16.199 The rotation angle of the fid. point is -51.124203 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1277.par makePlates : plateInfo struct for plate 1772 : (h4).mjd 53134 (h4).raCen 197.096 (h4).decCen 14.75281 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.096 14.753 197.096 16.253 plMakePlateFromTile : mjd of obs : 53134.695854 Observed HA/dec of plate center, fiducial point (deg) : 26.998 14.736 26.998 16.236 The rotation angle of the fid. point is -48.895916 plMakePlateFromTile : beginning loop over 1270 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1278.par makePlates : plateInfo struct for plate 1773 : (h4).mjd 53134 (h4).raCen 199.3245 (h4).decCen 14.53647 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.325 14.536 199.325 16.036 plMakePlateFromTile : mjd of obs : 53134.696485 Observed HA/dec of plate center, fiducial point (deg) : 24.998 14.520 24.998 16.019 The rotation angle of the fid. point is -46.853538 plMakePlateFromTile : beginning loop over 1296 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1279.par makePlates : plateInfo struct for plate 1774 : (h4).mjd 53134 (h4).raCen 201.4938 (h4).decCen 14.36937 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.494 14.369 201.494 15.869 plMakePlateFromTile : mjd of obs : 53134.696952 Observed HA/dec of plate center, fiducial point (deg) : 22.998 14.353 22.998 15.852 The rotation angle of the fid. point is -44.643597 plMakePlateFromTile : beginning loop over 1283 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (129.60, 292.19, 7.9) and (129.60, 292.30, 8.3) checkLTHo : distance = 0.110, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(129.60, 292.30, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1280.par makePlates : plateInfo struct for plate 1775 : (h4).mjd 53134 (h4).raCen 203.5298 (h4).decCen 14.27202 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.530 14.272 203.530 15.772 plMakePlateFromTile : mjd of obs : 53134.697050 Observed HA/dec of plate center, fiducial point (deg) : 20.998 14.255 20.998 15.755 The rotation angle of the fid. point is -42.275398 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1281.par makePlates : plateInfo struct for plate 1776 : (h4).mjd 53134 (h4).raCen 205.5474 (h4).decCen 14.06558 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.547 14.066 205.547 15.566 plMakePlateFromTile : mjd of obs : 53134.697097 Observed HA/dec of plate center, fiducial point (deg) : 18.998 14.049 18.998 15.549 The rotation angle of the fid. point is -39.488853 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1282.par makePlates : plateInfo struct for plate 1777 : (h4).mjd 53134 (h4).raCen 207.5215 (h4).decCen 13.87613 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.522 13.876 207.522 15.376 plMakePlateFromTile : mjd of obs : 53134.697023 Observed HA/dec of plate center, fiducial point (deg) : 16.998 13.860 16.998 15.360 The rotation angle of the fid. point is -36.435073 plMakePlateFromTile : beginning loop over 1279 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk92/complete//plPlugMapT-1283.par makePlates : plateInfo struct for plate 1778 : (h4).mjd 53134 (h4).raCen 209.0683 (h4).decCen 13.77849 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 209.068 13.778 209.068 15.278 plMakePlateFromTile : mjd of obs : 53134.695766 Observed HA/dec of plate center, fiducial point (deg) : 14.998 13.762 14.998 15.262 The rotation angle of the fid. point is -33.194261 plMakePlateFromTile : beginning loop over 1273 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sun Feb 29 14:08:30 CST 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 18 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1761.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 119 2 5 99 3 9 95 4 12 121 5 8 123 6 3 64 7 7 67 8 13 103 9 6 89 10 9 150 11 3 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 46 38 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 42 110 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 38 96 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 392 40 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 46 93 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 40 27 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 395 83 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 43 92 plFiberPlate : 121 possible sky positions to use as objects from a possible 583. plFiberPlate : 52 possible sky positions to use as objects from a possible 582. plFiberPlate : 38 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 57 possible sky positions to use as objects from a possible 577. plFiberPlate : 75 possible sky positions to use as objects from a possible 576. plFiberPlate : 54 possible sky positions to use as objects from a possible 575. plFiberPlate : 36 possible sky positions to use as objects from a possible 574. plFiberPlate : 21 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 20 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 59 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 5 possible sky positions to use as objects from a possible 564. plFiberPlate : 2 possible sky positions to use as objects from a possible 563. plFiberPlate : 7 possible sky positions to use as objects from a possible 562. plFiberPlate : 12 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 43 possible sky positions to use as objects from a possible 558. plFiberPlate : 20 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 9 possible sky positions to use as objects from a possible 555. plFiberPlate : 7 possible sky positions to use as objects from a possible 554. plFiberPlate : 12 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1761.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1761.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1762.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 113 2 8 99 3 3 105 4 6 106 5 15 126 6 11 76 7 0 69 8 1 111 9 8 102 10 9 153 11 8 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 48 20 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 403 45 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 46 38 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 42 110 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 46 93 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 54 128 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 408 134 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 43 92 plFiberPlate : 119 possible sky positions to use as objects from a possible 567. plFiberPlate : 88 possible sky positions to use as objects from a possible 566. plFiberPlate : 60 possible sky positions to use as objects from a possible 565. plFiberPlate : 20 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 44 possible sky positions to use as objects from a possible 562. plFiberPlate : 43 possible sky positions to use as objects from a possible 561. plFiberPlate : 66 possible sky positions to use as objects from a possible 560. plFiberPlate : 61 possible sky positions to use as objects from a possible 559. plFiberPlate : 40 possible sky positions to use as objects from a possible 558. plFiberPlate : 24 possible sky positions to use as objects from a possible 557. plFiberPlate : 5 possible sky positions to use as objects from a possible 556. plFiberPlate : 5 possible sky positions to use as objects from a possible 555. plFiberPlate : 17 possible sky positions to use as objects from a possible 554. plFiberPlate : 25 possible sky positions to use as objects from a possible 553. plFiberPlate : 14 possible sky positions to use as objects from a possible 552. plFiberPlate : 70 possible sky positions to use as objects from a possible 551. plFiberPlate : 39 possible sky positions to use as objects from a possible 550. plFiberPlate : 22 possible sky positions to use as objects from a possible 549. plFiberPlate : 5 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 57 possible sky positions to use as objects from a possible 542. plFiberPlate : 31 possible sky positions to use as objects from a possible 541. plFiberPlate : 9 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : 7 possible sky positions to use as objects from a possible 538. plFiberPlate : 10 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1761.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1762.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1762.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1763.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 121 2 2 102 3 4 93 4 6 110 5 2 121 6 3 75 7 8 77 8 9 103 9 2 116 10 4 163 11 4 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 51 40 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 57 38 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 62 60 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 417 67 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 418 54 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 62 140 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 60 89 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 54 128 plFiberPlate : 125 possible sky positions to use as objects from a possible 585. plFiberPlate : 64 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 29 possible sky positions to use as objects from a possible 582. plFiberPlate : 54 possible sky positions to use as objects from a possible 581. plFiberPlate : 28 possible sky positions to use as objects from a possible 580. plFiberPlate : 30 possible sky positions to use as objects from a possible 579. plFiberPlate : 87 possible sky positions to use as objects from a possible 578. plFiberPlate : 59 possible sky positions to use as objects from a possible 577. plFiberPlate : 28 possible sky positions to use as objects from a possible 576. plFiberPlate : 14 possible sky positions to use as objects from a possible 575. plFiberPlate : 24 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 22 possible sky positions to use as objects from a possible 572. plFiberPlate : 5 possible sky positions to use as objects from a possible 571. plFiberPlate : 9 possible sky positions to use as objects from a possible 570. plFiberPlate : 66 possible sky positions to use as objects from a possible 569. plFiberPlate : 46 possible sky positions to use as objects from a possible 568. plFiberPlate : 44 possible sky positions to use as objects from a possible 567. plFiberPlate : 21 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 2 possible sky positions to use as objects from a possible 564. plFiberPlate : 21 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : 55 possible sky positions to use as objects from a possible 560. plFiberPlate : 37 possible sky positions to use as objects from a possible 559. plFiberPlate : 23 possible sky positions to use as objects from a possible 558. plFiberPlate : 17 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1762.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1763.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1763.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1764.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 118 2 4 100 3 4 86 4 5 116 5 8 127 6 10 96 7 6 88 8 6 103 9 8 120 10 7 144 11 9 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 79 9 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 62 60 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 60 89 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 62 140 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 68 10 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 424 70 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 434 24 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 74 17 plFiberPlate : 109 possible sky positions to use as objects from a possible 611. plFiberPlate : 75 possible sky positions to use as objects from a possible 610. plFiberPlate : 41 possible sky positions to use as objects from a possible 609. plFiberPlate : 36 possible sky positions to use as objects from a possible 608. plFiberPlate : 20 possible sky positions to use as objects from a possible 607. plFiberPlate : 36 possible sky positions to use as objects from a possible 606. plFiberPlate : 42 possible sky positions to use as objects from a possible 605. plFiberPlate : 91 possible sky positions to use as objects from a possible 604. plFiberPlate : 49 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 8 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : 20 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 75 possible sky positions to use as objects from a possible 595. plFiberPlate : 42 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 6 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 23 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : 16 possible sky positions to use as objects from a possible 587. plFiberPlate : 62 possible sky positions to use as objects from a possible 586. plFiberPlate : 36 possible sky positions to use as objects from a possible 585. plFiberPlate : 34 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1763.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1764.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1764.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1765.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 1 116 2 11 86 3 9 83 4 10 114 5 5 143 6 3 77 7 5 85 8 6 117 9 8 116 10 15 134 11 6 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 442 73 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 79 9 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 439 57 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 78 28 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 90 21 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 84 37 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 434 24 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 79 39 plFiberPlate : 117 possible sky positions to use as objects from a possible 598. plFiberPlate : 52 possible sky positions to use as objects from a possible 597. plFiberPlate : 25 possible sky positions to use as objects from a possible 596. plFiberPlate : 19 possible sky positions to use as objects from a possible 595. plFiberPlate : 22 possible sky positions to use as objects from a possible 594. plFiberPlate : 30 possible sky positions to use as objects from a possible 593. plFiberPlate : 44 possible sky positions to use as objects from a possible 592. plFiberPlate : 80 possible sky positions to use as objects from a possible 591. plFiberPlate : 53 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 17 possible sky positions to use as objects from a possible 587. plFiberPlate : 6 possible sky positions to use as objects from a possible 586. plFiberPlate : 7 possible sky positions to use as objects from a possible 585. plFiberPlate : 24 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 87 possible sky positions to use as objects from a possible 582. plFiberPlate : 48 possible sky positions to use as objects from a possible 581. plFiberPlate : 38 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 12 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 61 possible sky positions to use as objects from a possible 573. plFiberPlate : 24 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 5 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 20 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1764.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1765.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1765.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1766.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 126 2 12 92 3 4 90 4 2 106 5 6 128 6 5 89 7 9 74 8 14 99 9 8 116 10 11 159 11 12 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 441 33 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 442 73 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 454 53 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 452 17 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 95 84 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 449 8 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 100 64 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 96 18 plFiberPlate : 111 possible sky positions to use as objects from a possible 588. plFiberPlate : 74 possible sky positions to use as objects from a possible 587. plFiberPlate : 57 possible sky positions to use as objects from a possible 586. plFiberPlate : 46 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 38 possible sky positions to use as objects from a possible 583. plFiberPlate : 69 possible sky positions to use as objects from a possible 582. plFiberPlate : 87 possible sky positions to use as objects from a possible 581. plFiberPlate : 74 possible sky positions to use as objects from a possible 580. plFiberPlate : 66 possible sky positions to use as objects from a possible 579. plFiberPlate : 46 possible sky positions to use as objects from a possible 578. plFiberPlate : 33 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 24 possible sky positions to use as objects from a possible 575. plFiberPlate : 27 possible sky positions to use as objects from a possible 574. plFiberPlate : 26 possible sky positions to use as objects from a possible 573. plFiberPlate : 88 possible sky positions to use as objects from a possible 572. plFiberPlate : 75 possible sky positions to use as objects from a possible 571. plFiberPlate : 51 possible sky positions to use as objects from a possible 570. plFiberPlate : 38 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 18 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 67 possible sky positions to use as objects from a possible 563. plFiberPlate : 46 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 13 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 25 possible sky positions to use as objects from a possible 557. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1765.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1766.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1766.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1767.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 127 2 6 114 3 10 90 4 7 116 5 15 124 6 11 72 7 4 77 8 6 116 9 14 104 10 13 160 11 8 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 461 31 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 460 59 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 100 164 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 463 33 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 461 31 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 103 78 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 96 18 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 98 26 plFiberPlate : 120 possible sky positions to use as objects from a possible 612. plFiberPlate : 56 possible sky positions to use as objects from a possible 611. plFiberPlate : 45 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 21 possible sky positions to use as objects from a possible 608. plFiberPlate : 44 possible sky positions to use as objects from a possible 607. plFiberPlate : 47 possible sky positions to use as objects from a possible 606. plFiberPlate : 100 possible sky positions to use as objects from a possible 605. plFiberPlate : 83 possible sky positions to use as objects from a possible 604. plFiberPlate : 54 possible sky positions to use as objects from a possible 603. plFiberPlate : 19 possible sky positions to use as objects from a possible 602. plFiberPlate : 14 possible sky positions to use as objects from a possible 601. plFiberPlate : 5 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 28 possible sky positions to use as objects from a possible 597. plFiberPlate : 94 possible sky positions to use as objects from a possible 596. plFiberPlate : 67 possible sky positions to use as objects from a possible 595. plFiberPlate : 40 possible sky positions to use as objects from a possible 594. plFiberPlate : 15 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 21 possible sky positions to use as objects from a possible 591. plFiberPlate : 13 possible sky positions to use as objects from a possible 590. plFiberPlate : 32 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 7 possible sky positions to use as objects from a possible 585. plFiberPlate : 6 possible sky positions to use as objects from a possible 584. plFiberPlate : 4 possible sky positions to use as objects from a possible 583. plFiberPlate : 5 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1766.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1767.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1767.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1768.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 137 2 10 93 3 3 93 4 4 120 5 11 132 6 8 72 7 6 68 8 9 106 9 9 107 10 6 142 11 6 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 471 44 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 470 80 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 108 39 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 109 54 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 117 71 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 123 56 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 463 33 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 475 68 plFiberPlate : 131 possible sky positions to use as objects from a possible 596. plFiberPlate : 61 possible sky positions to use as objects from a possible 595. plFiberPlate : 41 possible sky positions to use as objects from a possible 594. plFiberPlate : 23 possible sky positions to use as objects from a possible 593. plFiberPlate : 31 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 59 possible sky positions to use as objects from a possible 590. plFiberPlate : 79 possible sky positions to use as objects from a possible 589. plFiberPlate : 52 possible sky positions to use as objects from a possible 588. plFiberPlate : 42 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 9 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 16 possible sky positions to use as objects from a possible 582. plFiberPlate : 33 possible sky positions to use as objects from a possible 581. plFiberPlate : 84 possible sky positions to use as objects from a possible 580. plFiberPlate : 55 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 7 possible sky positions to use as objects from a possible 575. plFiberPlate : 9 possible sky positions to use as objects from a possible 574. plFiberPlate : 15 possible sky positions to use as objects from a possible 573. plFiberPlate : 8 possible sky positions to use as objects from a possible 572. plFiberPlate : 44 possible sky positions to use as objects from a possible 571. plFiberPlate : 28 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1767.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1768.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1768.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1769.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 116 2 4 82 3 4 85 4 9 120 5 12 118 6 9 75 7 8 70 8 5 111 9 10 112 10 4 150 11 1 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 490 39 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 130 51 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 122 34 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 475 48 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 135 89 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 128 16 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 121 78 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 475 68 plFiberPlate : 111 possible sky positions to use as objects from a possible 594. plFiberPlate : 52 possible sky positions to use as objects from a possible 593. plFiberPlate : 26 possible sky positions to use as objects from a possible 592. plFiberPlate : 32 possible sky positions to use as objects from a possible 591. plFiberPlate : 25 possible sky positions to use as objects from a possible 590. plFiberPlate : 25 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 93 possible sky positions to use as objects from a possible 587. plFiberPlate : 59 possible sky positions to use as objects from a possible 586. plFiberPlate : 36 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 13 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 30 possible sky positions to use as objects from a possible 579. plFiberPlate : 67 possible sky positions to use as objects from a possible 578. plFiberPlate : 65 possible sky positions to use as objects from a possible 577. plFiberPlate : 34 possible sky positions to use as objects from a possible 576. plFiberPlate : 20 possible sky positions to use as objects from a possible 575. plFiberPlate : 18 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 42 possible sky positions to use as objects from a possible 570. plFiberPlate : 49 possible sky positions to use as objects from a possible 569. plFiberPlate : 28 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : 8 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 12 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1768.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1769.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1769.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1770.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 115 2 4 85 3 8 88 4 10 104 5 6 112 6 4 68 7 9 66 8 11 95 9 9 105 10 14 156 11 10 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3970 40 1 71 43 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 149 71 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 135 89 plFiberPlate : adding spectro-photo std with objId = 3970 40 6 72 7 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 141 68 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 138 50 plFiberPlate : adding spectro-photo std with objId = 3970 40 2 67 40 plFiberPlate : adding spectro-photo std with objId = 3970 40 4 72 46 plFiberPlate : 106 possible sky positions to use as objects from a possible 544. plFiberPlate : 79 possible sky positions to use as objects from a possible 543. plFiberPlate : 40 possible sky positions to use as objects from a possible 542. plFiberPlate : 28 possible sky positions to use as objects from a possible 541. plFiberPlate : 17 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 27 possible sky positions to use as objects from a possible 538. plFiberPlate : 95 possible sky positions to use as objects from a possible 537. plFiberPlate : 65 possible sky positions to use as objects from a possible 536. plFiberPlate : 44 possible sky positions to use as objects from a possible 535. plFiberPlate : 30 possible sky positions to use as objects from a possible 534. plFiberPlate : 9 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : 20 possible sky positions to use as objects from a possible 529. plFiberPlate : 78 possible sky positions to use as objects from a possible 528. plFiberPlate : 49 possible sky positions to use as objects from a possible 527. plFiberPlate : 26 possible sky positions to use as objects from a possible 526. plFiberPlate : 26 possible sky positions to use as objects from a possible 525. plFiberPlate : 22 possible sky positions to use as objects from a possible 524. plFiberPlate : 5 possible sky positions to use as objects from a possible 523. plFiberPlate : 26 possible sky positions to use as objects from a possible 522. plFiberPlate : 14 possible sky positions to use as objects from a possible 521. plFiberPlate : 25 possible sky positions to use as objects from a possible 520. plFiberPlate : 35 possible sky positions to use as objects from a possible 519. plFiberPlate : 37 possible sky positions to use as objects from a possible 518. plFiberPlate : 29 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1769.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1770.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1770.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1771.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 112 2 10 105 3 10 81 4 14 106 5 10 130 6 3 94 7 2 74 8 5 102 9 6 111 10 16 152 11 14 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 150 36 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 165 123 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 160 93 plFiberPlate : adding spectro-photo std with objId = 3970 40 1 87 37 plFiberPlate : adding spectro-photo std with objId = 3970 40 6 92 48 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 165 77 plFiberPlate : adding spectro-photo std with objId = 3970 40 4 87 33 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 151 37 plFiberPlate : 109 possible sky positions to use as objects from a possible 597. plFiberPlate : 77 possible sky positions to use as objects from a possible 596. plFiberPlate : 50 possible sky positions to use as objects from a possible 595. plFiberPlate : 45 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 49 possible sky positions to use as objects from a possible 592. plFiberPlate : 30 possible sky positions to use as objects from a possible 591. plFiberPlate : 96 possible sky positions to use as objects from a possible 590. plFiberPlate : 49 possible sky positions to use as objects from a possible 589. plFiberPlate : 28 possible sky positions to use as objects from a possible 588. plFiberPlate : 7 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 26 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 73 possible sky positions to use as objects from a possible 581. plFiberPlate : 33 possible sky positions to use as objects from a possible 580. plFiberPlate : 23 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 7 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 22 possible sky positions to use as objects from a possible 573. plFiberPlate : 50 possible sky positions to use as objects from a possible 572. plFiberPlate : 40 possible sky positions to use as objects from a possible 571. plFiberPlate : 23 possible sky positions to use as objects from a possible 570. plFiberPlate : 11 possible sky positions to use as objects from a possible 569. plFiberPlate : 5 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 10 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1770.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1771.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1771.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1772.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 122 2 12 83 3 13 72 4 15 105 5 10 124 6 11 66 7 12 67 8 12 105 9 13 106 10 15 131 11 10 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 181 49 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 180 58 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 173 17 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 175 101 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 169 76 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 175 50 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 165 77 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 174 23 plFiberPlate : 89 possible sky positions to use as objects from a possible 546. plFiberPlate : 35 possible sky positions to use as objects from a possible 545. plFiberPlate : 19 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 38 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 56 possible sky positions to use as objects from a possible 540. plFiberPlate : 85 possible sky positions to use as objects from a possible 539. plFiberPlate : 45 possible sky positions to use as objects from a possible 538. plFiberPlate : 24 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 7 possible sky positions to use as objects from a possible 535. plFiberPlate : 24 possible sky positions to use as objects from a possible 534. plFiberPlate : 5 possible sky positions to use as objects from a possible 533. plFiberPlate : 26 possible sky positions to use as objects from a possible 532. plFiberPlate : 35 possible sky positions to use as objects from a possible 531. plFiberPlate : 75 possible sky positions to use as objects from a possible 530. plFiberPlate : 51 possible sky positions to use as objects from a possible 529. plFiberPlate : 17 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : 27 possible sky positions to use as objects from a possible 526. plFiberPlate : 9 possible sky positions to use as objects from a possible 525. plFiberPlate : 5 possible sky positions to use as objects from a possible 524. plFiberPlate : 22 possible sky positions to use as objects from a possible 523. plFiberPlate : 24 possible sky positions to use as objects from a possible 522. plFiberPlate : 51 possible sky positions to use as objects from a possible 521. plFiberPlate : 49 possible sky positions to use as objects from a possible 520. plFiberPlate : 33 possible sky positions to use as objects from a possible 519. plFiberPlate : 9 possible sky positions to use as objects from a possible 518. plFiberPlate : 28 possible sky positions to use as objects from a possible 517. plFiberPlate : 13 possible sky positions to use as objects from a possible 516. plFiberPlate : 13 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1771.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1772.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1772.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1773.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 117 2 9 89 3 10 87 4 10 99 5 10 126 6 6 81 7 8 78 8 11 104 9 8 115 10 14 145 11 10 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3970 40 6 114 12 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 188 38 plFiberPlate : adding spectro-photo std with objId = 3836 41 6 337 62 plFiberPlate : adding spectro-photo std with objId = 3970 40 2 118 36 plFiberPlate : adding spectro-photo std with objId = 3970 40 5 117 49 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 192 35 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 194 14 plFiberPlate : adding spectro-photo std with objId = 3970 40 5 116 73 plFiberPlate : 95 possible sky positions to use as objects from a possible 581. plFiberPlate : 87 possible sky positions to use as objects from a possible 580. plFiberPlate : 71 possible sky positions to use as objects from a possible 579. plFiberPlate : 41 possible sky positions to use as objects from a possible 578. plFiberPlate : 33 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 50 possible sky positions to use as objects from a possible 575. plFiberPlate : 83 possible sky positions to use as objects from a possible 574. plFiberPlate : 55 possible sky positions to use as objects from a possible 573. plFiberPlate : 28 possible sky positions to use as objects from a possible 572. plFiberPlate : 14 possible sky positions to use as objects from a possible 571. plFiberPlate : 10 possible sky positions to use as objects from a possible 570. plFiberPlate : 9 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 19 possible sky positions to use as objects from a possible 567. plFiberPlate : 18 possible sky positions to use as objects from a possible 566. plFiberPlate : 63 possible sky positions to use as objects from a possible 565. plFiberPlate : 41 possible sky positions to use as objects from a possible 564. plFiberPlate : 20 possible sky positions to use as objects from a possible 563. plFiberPlate : 8 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 21 possible sky positions to use as objects from a possible 560. plFiberPlate : 6 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 54 possible sky positions to use as objects from a possible 556. plFiberPlate : 25 possible sky positions to use as objects from a possible 555. plFiberPlate : 22 possible sky positions to use as objects from a possible 554. plFiberPlate : 23 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1772.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1773.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1773.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1774.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 117 2 5 94 3 10 83 4 13 91 5 11 119 6 5 71 7 4 71 8 8 108 9 10 111 10 14 129 11 10 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3971 40 1 23 50 plFiberPlate : adding spectro-photo std with objId = 3971 40 1 15 32 plFiberPlate : adding spectro-photo std with objId = 3971 40 3 23 52 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 201 121 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 211 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 198 48 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 194 14 plFiberPlate : adding spectro-photo std with objId = 3971 40 3 18 107 plFiberPlate : 85 possible sky positions to use as objects from a possible 552. plFiberPlate : 78 possible sky positions to use as objects from a possible 551. plFiberPlate : 43 possible sky positions to use as objects from a possible 550. plFiberPlate : 40 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 28 possible sky positions to use as objects from a possible 547. plFiberPlate : 57 possible sky positions to use as objects from a possible 546. plFiberPlate : 72 possible sky positions to use as objects from a possible 545. plFiberPlate : 34 possible sky positions to use as objects from a possible 544. plFiberPlate : 27 possible sky positions to use as objects from a possible 543. plFiberPlate : 24 possible sky positions to use as objects from a possible 542. plFiberPlate : 20 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 31 possible sky positions to use as objects from a possible 538. plFiberPlate : 32 possible sky positions to use as objects from a possible 537. plFiberPlate : 82 possible sky positions to use as objects from a possible 536. plFiberPlate : 46 possible sky positions to use as objects from a possible 535. plFiberPlate : 35 possible sky positions to use as objects from a possible 534. plFiberPlate : 24 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 19 possible sky positions to use as objects from a possible 530. plFiberPlate : 21 possible sky positions to use as objects from a possible 529. plFiberPlate : 19 possible sky positions to use as objects from a possible 528. plFiberPlate : 69 possible sky positions to use as objects from a possible 527. plFiberPlate : 42 possible sky positions to use as objects from a possible 526. plFiberPlate : 27 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 11 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1773.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1774.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1774.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1775.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 109 2 5 83 3 8 89 4 7 105 5 13 128 6 6 73 7 5 60 8 12 94 9 5 93 10 9 121 11 7 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3971 40 2 35 50 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 214 8 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 213 108 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 222 51 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 211 4 plFiberPlate : adding spectro-photo std with objId = 3971 40 6 33 28 plFiberPlate : adding spectro-photo std with objId = 3971 40 1 39 22 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 215 18 plFiberPlate : 115 possible sky positions to use as objects from a possible 527. plFiberPlate : 58 possible sky positions to use as objects from a possible 526. plFiberPlate : 47 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 29 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 53 possible sky positions to use as objects from a possible 521. plFiberPlate : 71 possible sky positions to use as objects from a possible 520. plFiberPlate : 48 possible sky positions to use as objects from a possible 519. plFiberPlate : 29 possible sky positions to use as objects from a possible 518. plFiberPlate : 21 possible sky positions to use as objects from a possible 517. plFiberPlate : 9 possible sky positions to use as objects from a possible 516. plFiberPlate : 13 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 33 possible sky positions to use as objects from a possible 513. plFiberPlate : 17 possible sky positions to use as objects from a possible 512. plFiberPlate : 61 possible sky positions to use as objects from a possible 511. plFiberPlate : 34 possible sky positions to use as objects from a possible 510. plFiberPlate : 16 possible sky positions to use as objects from a possible 509. plFiberPlate : 4 possible sky positions to use as objects from a possible 508. plFiberPlate : 6 possible sky positions to use as objects from a possible 507. plFiberPlate : 10 possible sky positions to use as objects from a possible 506. plFiberPlate : 5 possible sky positions to use as objects from a possible 505. plFiberPlate : 17 possible sky positions to use as objects from a possible 504. plFiberPlate : 15 possible sky positions to use as objects from a possible 503. plFiberPlate : 62 possible sky positions to use as objects from a possible 502. plFiberPlate : 35 possible sky positions to use as objects from a possible 501. plFiberPlate : 19 possible sky positions to use as objects from a possible 500. plFiberPlate : 14 possible sky positions to use as objects from a possible 499. plFiberPlate : 16 possible sky positions to use as objects from a possible 498. plFiberPlate : 15 possible sky positions to use as objects from a possible 497. plFiberPlate : 19 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1774.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1775.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1775.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1776.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 107 2 9 89 3 10 84 4 11 102 5 14 124 6 8 75 7 5 59 8 6 99 9 11 87 10 16 138 11 8 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 6 230 26 plFiberPlate : adding spectro-photo std with objId = 3971 40 5 40 55 plFiberPlate : adding spectro-photo std with objId = 3971 40 1 53 35 plFiberPlate : adding spectro-photo std with objId = 3971 40 5 47 42 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 231 117 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 231 94 plFiberPlate : adding spectro-photo std with objId = 3971 40 2 56 25 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 226 99 plFiberPlate : 124 possible sky positions to use as objects from a possible 556. plFiberPlate : 72 possible sky positions to use as objects from a possible 555. plFiberPlate : 45 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 43 possible sky positions to use as objects from a possible 551. plFiberPlate : 28 possible sky positions to use as objects from a possible 550. plFiberPlate : 85 possible sky positions to use as objects from a possible 549. plFiberPlate : 54 possible sky positions to use as objects from a possible 548. plFiberPlate : 31 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 6 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 11 possible sky positions to use as objects from a possible 542. plFiberPlate : 16 possible sky positions to use as objects from a possible 541. plFiberPlate : 46 possible sky positions to use as objects from a possible 540. plFiberPlate : 54 possible sky positions to use as objects from a possible 539. plFiberPlate : 26 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 7 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 12 possible sky positions to use as objects from a possible 534. plFiberPlate : 18 possible sky positions to use as objects from a possible 533. plFiberPlate : 16 possible sky positions to use as objects from a possible 532. plFiberPlate : 50 possible sky positions to use as objects from a possible 531. plFiberPlate : 30 possible sky positions to use as objects from a possible 530. plFiberPlate : 22 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 20 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1775.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1776.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1776.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1777.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 125 2 6 93 3 8 83 4 7 103 5 7 127 6 6 71 7 5 53 8 6 88 9 9 92 10 12 151 11 7 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 239 25 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 238 59 plFiberPlate : adding spectro-photo std with objId = 3971 40 1 53 35 plFiberPlate : adding spectro-photo std with objId = 3971 40 4 59 12 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 240 157 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 231 117 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 248 38 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 245 28 plFiberPlate : 95 possible sky positions to use as objects from a possible 552. plFiberPlate : 42 possible sky positions to use as objects from a possible 551. plFiberPlate : 30 possible sky positions to use as objects from a possible 550. plFiberPlate : 19 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 35 possible sky positions to use as objects from a possible 546. plFiberPlate : 75 possible sky positions to use as objects from a possible 545. plFiberPlate : 53 possible sky positions to use as objects from a possible 544. plFiberPlate : 52 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 22 possible sky positions to use as objects from a possible 541. plFiberPlate : 28 possible sky positions to use as objects from a possible 540. plFiberPlate : 19 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 19 possible sky positions to use as objects from a possible 537. plFiberPlate : 93 possible sky positions to use as objects from a possible 536. plFiberPlate : 53 possible sky positions to use as objects from a possible 535. plFiberPlate : 26 possible sky positions to use as objects from a possible 534. plFiberPlate : 15 possible sky positions to use as objects from a possible 533. plFiberPlate : 5 possible sky positions to use as objects from a possible 532. plFiberPlate : 6 possible sky positions to use as objects from a possible 531. plFiberPlate : 5 possible sky positions to use as objects from a possible 530. plFiberPlate : 18 possible sky positions to use as objects from a possible 529. plFiberPlate : 16 possible sky positions to use as objects from a possible 528. plFiberPlate : 37 possible sky positions to use as objects from a possible 527. plFiberPlate : 24 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 4 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 2 possible sky positions to use as objects from a possible 521. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1776.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1777.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1777.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.2/plPlugMapP-1778.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 123 2 12 99 3 9 93 4 4 106 5 11 117 6 6 65 7 6 56 8 10 99 9 8 92 10 11 136 11 12 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3971 40 6 70 36 plFiberPlate : adding spectro-photo std with objId = 4381 40 5 245 32 plFiberPlate : adding spectro-photo std with objId = 4381 40 2 249 4 plFiberPlate : adding spectro-photo std with objId = 4381 40 1 255 16 plFiberPlate : adding spectro-photo std with objId = 3971 40 4 61 72 plFiberPlate : adding spectro-photo std with objId = 4381 40 4 253 45 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 248 38 plFiberPlate : adding spectro-photo std with objId = 4381 40 3 245 28 plFiberPlate : 106 possible sky positions to use as objects from a possible 542. plFiberPlate : 70 possible sky positions to use as objects from a possible 541. plFiberPlate : 49 possible sky positions to use as objects from a possible 540. plFiberPlate : 39 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 29 possible sky positions to use as objects from a possible 537. plFiberPlate : 30 possible sky positions to use as objects from a possible 536. plFiberPlate : 67 possible sky positions to use as objects from a possible 535. plFiberPlate : 45 possible sky positions to use as objects from a possible 534. plFiberPlate : 23 possible sky positions to use as objects from a possible 533. plFiberPlate : 18 possible sky positions to use as objects from a possible 532. plFiberPlate : 5 possible sky positions to use as objects from a possible 531. plFiberPlate : 4 possible sky positions to use as objects from a possible 530. plFiberPlate : 12 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 26 possible sky positions to use as objects from a possible 527. plFiberPlate : 79 possible sky positions to use as objects from a possible 526. plFiberPlate : 51 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 4 possible sky positions to use as objects from a possible 523. plFiberPlate : 7 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 17 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 39 possible sky positions to use as objects from a possible 517. plFiberPlate : 20 possible sky positions to use as objects from a possible 516. plFiberPlate : 18 possible sky positions to use as objects from a possible 515. plFiberPlate : 4 possible sky positions to use as objects from a possible 514. plFiberPlate : 11 possible sky positions to use as objects from a possible 513. plFiberPlate : 11 possible sky positions to use as objects from a possible 512. plFiberPlate : 13 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1777.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1778.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.2/plOverlay-1778.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sun Feb 29 14:09:52 CST 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 18 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1761.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1761.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1761.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1762.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2661,5.9863) and (-11.54,5.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1762.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1762.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2697,-6.6227) and (-2.26,-12.29) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1763.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1979,-5.9507) and (11.84,-4.54) plMakeFanucCodes : fixed path between (11.8412,-4.5374) and (12.30,-3.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1763.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1763.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1764.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1764.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1764.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1765.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.4959,8.3620) and (-10.82,6.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1765.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1765.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1766.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8731,4.7718) and (12.03,3.78) plMakeFanucCodes : fixed path between (-11.6330,-5.3425) and (-11.87,-4.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1766.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1766.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1767.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.4911,9.5686) and (-7.81,10.13) plMakeFanucCodes : fixed path between (7.5359,-10.3470) and (3.04,-12.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1767.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1767.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1768.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.0674,9.9387) and (-6.59,10.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1768.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1768.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1769.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4127,4.8444) and (-12.35,3.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1769.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1769.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1770.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1770.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1770.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1771.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1771.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1771.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1772.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7711,-6.6936) and (11.31,-5.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1772.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1772.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1773.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1773.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1773.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1774.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1774.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1774.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1775.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1775.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1775.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1776.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1776.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1776.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1777.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1777.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.6537,-9.7290) and (12.28,-1.05) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1777.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1778.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1778.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.2/plFanuc-1778.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sun Feb 29 14:10:56 CST 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bd8efc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 18 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1761 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1762 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1763 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1764 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1765 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1766 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1767 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1768 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1769 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1770 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1771 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1772 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1773 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1774 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1775 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1776 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1777 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1778 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sun Feb 29 14:11:36 CST 2004 Begin running "plateEnder dr2004.03.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Sun Feb 29 14:12:26 CST 2004 ALL DONE PS: Read file for stderr output of this job.