Sender: LSF System Subject: Job 26550: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Oct 22 19:19:22 2004 Results reported at Fri Oct 22 19:22:59 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_101 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.10.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 190.20 sec. Max Memory : 12 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Oct 22 19:19:26 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Oct 22 19:19:36 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/unity/v2_6/Linux/lib/unity/bin:/sdss/ups/prd/sdsscp/v1_43/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_3/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/iraf/v2_12_1/Linux/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/ds9/v3_0b5/Linux/bin:/sdss/ups/prd/astrom/v3_8a/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_101/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Fri Oct 22 19:19:36 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_101/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0b5/Linux DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_3/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html IRAF_DIR=/sdss/ups/prd/iraf/v2_12_1/Linux KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_43/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UNITY_DIR=/sdss/ups/prd/unity/v2_6/Linux UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_jZjJsg --------------------------------------------------------------- --------------------------------------------------------------- Fri Oct 22 19:19:36 CDT 2004 Begin running plate --------------------------------------------------------------- Fri Oct 22 19:19:36 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8c4e7a4 makePlates : beginning loop over plObs chain; makePlates : making 20 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8004.par makePlates : plateInfo struct for plate 2038 : (h4).mjd 53341 (h4).raCen 10.513 (h4).decCen 24.898 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 10.513 24.898 10.513 26.398 plMakePlateFromTile : mjd of obs : 53341.466985 Observed HA/dec of plate center, fiducial point (deg) : -25.002 24.930 -25.002 26.430 The rotation angle of the fid. point is 64.464600 plMakePlateFromTile : beginning loop over 1653 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8005.par makePlates : plateInfo struct for plate 2039 : (h4).mjd 53341 (h4).raCen 18.7 (h4).decCen -9.721 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 18.700 -9.721 18.700 -8.221 plMakePlateFromTile : mjd of obs : 53341.509053 Observed HA/dec of plate center, fiducial point (deg) : -18.002 -9.679 -18.003 -8.180 The rotation angle of the fid. point is 21.263984 plMakePlateFromTile : beginning loop over 1554 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8006.par makePlates : plateInfo struct for plate 2040 : (h4).mjd 53341 (h4).raCen 19.14 (h4).decCen 25.737 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 19.140 25.737 19.140 27.237 plMakePlateFromTile : mjd of obs : 53341.465951 Observed HA/dec of plate center, fiducial point (deg) : -34.002 25.769 -34.003 27.269 The rotation angle of the fid. point is 68.575195 plMakePlateFromTile : beginning loop over 1623 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8007.par makePlates : plateInfo struct for plate 2041 : (h4).mjd 53341 (h4).raCen 19.9956 (h4).decCen 31.6903 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 19.996 31.690 19.996 33.190 plMakePlateFromTile : mjd of obs : 53341.509891 Observed HA/dec of plate center, fiducial point (deg) : -19.002 31.720 -19.003 33.219 The rotation angle of the fid. point is 81.164370 plMakePlateFromTile : beginning loop over 1720 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8008.par makePlates : plateInfo struct for plate 2042 : (h4).mjd 53341 (h4).raCen 21.146 (h4).decCen 38.627 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.146 38.627 21.146 40.127 plMakePlateFromTile : mjd of obs : 53341.549106 Observed HA/dec of plate center, fiducial point (deg) : -6.002 38.654 -6.003 40.154 The rotation angle of the fid. point is 138.538066 plMakePlateFromTile : beginning loop over 1699 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8009.par makePlates : plateInfo struct for plate 2043 : (h4).mjd 53341 (h4).raCen 21.328 (h4).decCen 39.617 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.328 39.617 21.328 41.117 plMakePlateFromTile : mjd of obs : 53341.549612 Observed HA/dec of plate center, fiducial point (deg) : -6.002 39.644 -6.003 41.143 The rotation angle of the fid. point is 142.988249 plMakePlateFromTile : beginning loop over 1727 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8010.par makePlates : plateInfo struct for plate 2044 : (h4).mjd 53341 (h4).raCen 24.72322 (h4).decCen 23.699 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 24.723 23.699 24.723 25.199 plMakePlateFromTile : mjd of obs : 53341.589490 Observed HA/dec of plate center, fiducial point (deg) : 4.998 23.729 4.997 25.229 The rotation angle of the fid. point is -24.775849 plMakePlateFromTile : beginning loop over 1621 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8011.par makePlates : plateInfo struct for plate 2045 : (h4).mjd 53341 (h4).raCen 30 (h4).decCen 0 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 30.000 0.000 30.000 1.500 plMakePlateFromTile : mjd of obs : 53341.631808 Observed HA/dec of plate center, fiducial point (deg) : 14.998 0.036 14.997 1.535 The rotation angle of the fid. point is -21.903169 plMakePlateFromTile : beginning loop over 1563 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8012.par makePlates : plateInfo struct for plate 2046 : (h4).mjd 53341 (h4).raCen 32.2264 (h4).decCen 22.521 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 32.226 22.521 32.226 24.021 plMakePlateFromTile : mjd of obs : 53341.629677 Observed HA/dec of plate center, fiducial point (deg) : 11.998 22.550 11.997 24.049 The rotation angle of the fid. point is -43.410356 plMakePlateFromTile : beginning loop over 1616 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8013.par makePlates : plateInfo struct for plate 2047 : (h4).mjd 53341 (h4).raCen 37.3955 (h4).decCen -8.4683 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 37.395 -8.468 37.395 -6.968 plMakePlateFromTile : mjd of obs : 53341.671691 Observed HA/dec of plate center, fiducial point (deg) : 21.998 -8.430 21.998 -6.931 The rotation angle of the fid. point is -25.849500 plMakePlateFromTile : beginning loop over 1533 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8014.par makePlates : plateInfo struct for plate 2048 : (h4).mjd 53341 (h4).raCen 47 (h4).decCen 0 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 47.000 0.000 47.000 1.500 plMakePlateFromTile : mjd of obs : 53341.673362 Observed HA/dec of plate center, fiducial point (deg) : 12.998 0.031 12.997 1.531 The rotation angle of the fid. point is -19.251750 plMakePlateFromTile : beginning loop over 1569 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8015.par makePlates : plateInfo struct for plate 2049 : (h4).mjd 53341 (h4).raCen 53 (h4).decCen 0 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 53.000 0.000 53.000 1.500 plMakePlateFromTile : mjd of obs : 53341.714923 Observed HA/dec of plate center, fiducial point (deg) : 21.998 0.030 21.997 1.529 The rotation angle of the fid. point is -30.188564 plMakePlateFromTile : beginning loop over 1574 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8016.par makePlates : plateInfo struct for plate 2050 : (h4).mjd 53341 (h4).raCen 55.4313 (h4).decCen -6.4086 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 55.431 -6.409 55.431 -4.909 plMakePlateFromTile : mjd of obs : 53341.713341 Observed HA/dec of plate center, fiducial point (deg) : 18.998 -6.377 18.997 -4.878 The rotation angle of the fid. point is -23.589073 plMakePlateFromTile : beginning loop over 1571 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8017.par makePlates : plateInfo struct for plate 2051 : (h4).mjd 53341 (h4).raCen 59.4161 (h4).decCen -5.8582 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 59.416 -5.858 59.416 -4.358 plMakePlateFromTile : mjd of obs : 53341.754864 Observed HA/dec of plate center, fiducial point (deg) : 29.998 -5.827 29.997 -4.328 The rotation angle of the fid. point is -34.448690 plMakePlateFromTile : beginning loop over 1596 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8018.par makePlates : plateInfo struct for plate 2052 : (h4).mjd 53341 (h4).raCen 83.2 (h4).decCen 0 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 83.200 0.000 83.200 1.500 plMakePlateFromTile : mjd of obs : 53341.754247 Observed HA/dec of plate center, fiducial point (deg) : 5.998 0.017 5.997 1.516 The rotation angle of the fid. point is -9.195536 plMakePlateFromTile : beginning loop over 2044 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8019.par makePlates : plateInfo struct for plate 2053 : (h4).mjd 53341 (h4).raCen 112.5084 (h4).decCen 35.9911 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 112.508 35.991 112.508 37.491 plMakePlateFromTile : mjd of obs : 53341.799463 Observed HA/dec of plate center, fiducial point (deg) : -7.002 35.980 -7.003 37.480 The rotation angle of the fid. point is 116.999312 plMakePlateFromTile : beginning loop over 1802 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8020.par makePlates : plateInfo struct for plate 2054 : (h4).mjd 53341 (h4).raCen 115.9969 (h4).decCen 18.17696 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 115.997 18.177 115.997 19.677 plMakePlateFromTile : mjd of obs : 53341.800784 Observed HA/dec of plate center, fiducial point (deg) : -10.002 18.171 -10.003 19.671 The rotation angle of the fid. point is 29.709972 plMakePlateFromTile : beginning loop over 1807 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8021.par makePlates : plateInfo struct for plate 2055 : (h4).mjd 53341 (h4).raCen 116.88 (h4).decCen 28.024 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.880 28.024 116.880 29.524 plMakePlateFromTile : mjd of obs : 53341.839267 Observed HA/dec of plate center, fiducial point (deg) : 2.998 28.014 2.997 29.514 The rotation angle of the fid. point is -27.704375 plMakePlateFromTile : beginning loop over 1755 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8022.par makePlates : plateInfo struct for plate 2056 : (h4).mjd 53341 (h4).raCen 121.2047 (h4).decCen 6.7479 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.205 6.748 121.205 8.248 plMakePlateFromTile : mjd of obs : 53341.878926 Observed HA/dec of plate center, fiducial point (deg) : 12.998 6.745 12.997 8.244 The rotation angle of the fid. point is -23.164836 plMakePlateFromTile : beginning loop over 1651 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapT-8023.par makePlates : plateInfo struct for plate 2057 : (h4).mjd 53341 (h4).raCen 124 (h4).decCen 0 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.000 0.000 124.000 1.500 plMakePlateFromTile : mjd of obs : 53341.881120 Observed HA/dec of plate center, fiducial point (deg) : 10.998 -0.001 10.997 1.498 The rotation angle of the fid. point is -16.480065 plMakePlateFromTile : beginning loop over 1741 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Oct 22 19:20:19 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 20 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2038.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 173 2 16 115 3 7 114 4 13 159 5 20 193 6 13 124 7 9 111 8 11 160 9 21 184 10 25 232 11 18 165 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 435 32 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 433 35 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 433 42 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 432 73 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 429 6 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 425 104 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 423 128 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 422 42 plFiberPlate : 174 possible sky positions to use as objects from a possible 857. plFiberPlate : 113 possible sky positions to use as objects from a possible 856. plFiberPlate : 51 possible sky positions to use as objects from a possible 855. plFiberPlate : 36 possible sky positions to use as objects from a possible 854. plFiberPlate : 46 possible sky positions to use as objects from a possible 853. plFiberPlate : 37 possible sky positions to use as objects from a possible 852. plFiberPlate : 57 possible sky positions to use as objects from a possible 851. plFiberPlate : 122 possible sky positions to use as objects from a possible 850. plFiberPlate : 93 possible sky positions to use as objects from a possible 849. plFiberPlate : 56 possible sky positions to use as objects from a possible 848. plFiberPlate : 22 possible sky positions to use as objects from a possible 847. plFiberPlate : 25 possible sky positions to use as objects from a possible 846. plFiberPlate : 20 possible sky positions to use as objects from a possible 845. plFiberPlate : 13 possible sky positions to use as objects from a possible 844. plFiberPlate : 14 possible sky positions to use as objects from a possible 843. plFiberPlate : 30 possible sky positions to use as objects from a possible 842. plFiberPlate : 112 possible sky positions to use as objects from a possible 841. plFiberPlate : 97 possible sky positions to use as objects from a possible 840. plFiberPlate : 58 possible sky positions to use as objects from a possible 839. plFiberPlate : 36 possible sky positions to use as objects from a possible 838. plFiberPlate : 12 possible sky positions to use as objects from a possible 837. plFiberPlate : 30 possible sky positions to use as objects from a possible 836. plFiberPlate : 21 possible sky positions to use as objects from a possible 835. plFiberPlate : 11 possible sky positions to use as objects from a possible 834. plFiberPlate : 24 possible sky positions to use as objects from a possible 833. plFiberPlate : 78 possible sky positions to use as objects from a possible 832. plFiberPlate : 57 possible sky positions to use as objects from a possible 831. plFiberPlate : 47 possible sky positions to use as objects from a possible 830. plFiberPlate : 29 possible sky positions to use as objects from a possible 829. plFiberPlate : 37 possible sky positions to use as objects from a possible 828. plFiberPlate : 20 possible sky positions to use as objects from a possible 827. plFiberPlate : 15 possible sky positions to use as objects from a possible 826. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 749 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2038.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2038.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2039.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 184 2 3 123 3 4 121 4 6 163 5 8 187 6 4 124 7 1 121 8 2 175 9 2 177 10 11 243 11 8 183 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1740 40 6 146 15 plFiberPlate : adding spectro-photo std with objId = 1740 40 5 143 12 plFiberPlate : adding spectro-photo std with objId = 1740 40 4 141 41 plFiberPlate : adding spectro-photo std with objId = 1740 40 3 138 15 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 206 14 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 205 36 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 204 5 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 198 19 plFiberPlate : 179 possible sky positions to use as objects from a possible 881. plFiberPlate : 160 possible sky positions to use as objects from a possible 880. plFiberPlate : 96 possible sky positions to use as objects from a possible 879. plFiberPlate : 60 possible sky positions to use as objects from a possible 878. plFiberPlate : 42 possible sky positions to use as objects from a possible 877. plFiberPlate : 66 possible sky positions to use as objects from a possible 876. plFiberPlate : 65 possible sky positions to use as objects from a possible 875. plFiberPlate : 121 possible sky positions to use as objects from a possible 874. plFiberPlate : 101 possible sky positions to use as objects from a possible 873. plFiberPlate : 72 possible sky positions to use as objects from a possible 872. plFiberPlate : 46 possible sky positions to use as objects from a possible 871. plFiberPlate : 21 possible sky positions to use as objects from a possible 870. plFiberPlate : 24 possible sky positions to use as objects from a possible 869. plFiberPlate : 25 possible sky positions to use as objects from a possible 868. plFiberPlate : 30 possible sky positions to use as objects from a possible 867. plFiberPlate : 34 possible sky positions to use as objects from a possible 866. plFiberPlate : 107 possible sky positions to use as objects from a possible 865. plFiberPlate : 98 possible sky positions to use as objects from a possible 864. plFiberPlate : 57 possible sky positions to use as objects from a possible 863. plFiberPlate : 36 possible sky positions to use as objects from a possible 862. plFiberPlate : 31 possible sky positions to use as objects from a possible 861. plFiberPlate : 31 possible sky positions to use as objects from a possible 860. plFiberPlate : 16 possible sky positions to use as objects from a possible 859. plFiberPlate : 24 possible sky positions to use as objects from a possible 858. plFiberPlate : 35 possible sky positions to use as objects from a possible 857. plFiberPlate : 80 possible sky positions to use as objects from a possible 856. plFiberPlate : 46 possible sky positions to use as objects from a possible 855. plFiberPlate : 29 possible sky positions to use as objects from a possible 854. plFiberPlate : 20 possible sky positions to use as objects from a possible 853. plFiberPlate : 19 possible sky positions to use as objects from a possible 852. plFiberPlate : 24 possible sky positions to use as objects from a possible 851. plFiberPlate : 18 possible sky positions to use as objects from a possible 850. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 693 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2038.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2039.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2039.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2040.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 154 2 17 139 3 5 142 4 10 142 5 11 162 6 10 136 7 15 133 8 21 145 9 17 177 10 25 244 11 26 167 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 121 96 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 117 10 plFiberPlate : adding spectro-photo std with objId = 4829 40 1 117 125 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 115 105 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 109 91 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 108 158 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 104 123 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 103 96 plFiberPlate : 194 possible sky positions to use as objects from a possible 836. plFiberPlate : 115 possible sky positions to use as objects from a possible 835. plFiberPlate : 60 possible sky positions to use as objects from a possible 834. plFiberPlate : 27 possible sky positions to use as objects from a possible 833. plFiberPlate : 55 possible sky positions to use as objects from a possible 832. plFiberPlate : 37 possible sky positions to use as objects from a possible 831. plFiberPlate : 57 possible sky positions to use as objects from a possible 830. plFiberPlate : 115 possible sky positions to use as objects from a possible 829. plFiberPlate : 88 possible sky positions to use as objects from a possible 828. plFiberPlate : 76 possible sky positions to use as objects from a possible 827. plFiberPlate : 25 possible sky positions to use as objects from a possible 826. plFiberPlate : 22 possible sky positions to use as objects from a possible 825. plFiberPlate : 17 possible sky positions to use as objects from a possible 824. plFiberPlate : 14 possible sky positions to use as objects from a possible 823. plFiberPlate : 19 possible sky positions to use as objects from a possible 822. plFiberPlate : 19 possible sky positions to use as objects from a possible 821. plFiberPlate : 105 possible sky positions to use as objects from a possible 820. plFiberPlate : 82 possible sky positions to use as objects from a possible 819. plFiberPlate : 68 possible sky positions to use as objects from a possible 818. plFiberPlate : 41 possible sky positions to use as objects from a possible 817. plFiberPlate : 36 possible sky positions to use as objects from a possible 816. plFiberPlate : 19 possible sky positions to use as objects from a possible 815. plFiberPlate : 26 possible sky positions to use as objects from a possible 814. plFiberPlate : 25 possible sky positions to use as objects from a possible 813. plFiberPlate : 15 possible sky positions to use as objects from a possible 812. plFiberPlate : 71 possible sky positions to use as objects from a possible 811. plFiberPlate : 55 possible sky positions to use as objects from a possible 810. plFiberPlate : 43 possible sky positions to use as objects from a possible 809. plFiberPlate : 25 possible sky positions to use as objects from a possible 808. plFiberPlate : 14 possible sky positions to use as objects from a possible 807. plFiberPlate : 26 possible sky positions to use as objects from a possible 806. plFiberPlate : 14 possible sky positions to use as objects from a possible 805. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 745 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2039.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2040.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2040.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2041.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 173 2 21 150 3 11 138 4 11 150 5 11 152 6 13 133 7 23 131 8 34 140 9 25 172 10 31 240 11 27 180 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 158 49 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 157 43 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 154 168 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 153 253 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 148 131 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 148 177 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 144 204 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 144 124 plFiberPlate : 176 possible sky positions to use as objects from a possible 842. plFiberPlate : 122 possible sky positions to use as objects from a possible 841. plFiberPlate : 81 possible sky positions to use as objects from a possible 840. plFiberPlate : 43 possible sky positions to use as objects from a possible 839. plFiberPlate : 42 possible sky positions to use as objects from a possible 838. plFiberPlate : 57 possible sky positions to use as objects from a possible 837. plFiberPlate : 75 possible sky positions to use as objects from a possible 836. plFiberPlate : 111 possible sky positions to use as objects from a possible 835. plFiberPlate : 102 possible sky positions to use as objects from a possible 834. plFiberPlate : 68 possible sky positions to use as objects from a possible 833. plFiberPlate : 33 possible sky positions to use as objects from a possible 832. plFiberPlate : 23 possible sky positions to use as objects from a possible 831. plFiberPlate : 29 possible sky positions to use as objects from a possible 830. plFiberPlate : 25 possible sky positions to use as objects from a possible 829. plFiberPlate : 34 possible sky positions to use as objects from a possible 828. plFiberPlate : 22 possible sky positions to use as objects from a possible 827. plFiberPlate : 79 possible sky positions to use as objects from a possible 826. plFiberPlate : 64 possible sky positions to use as objects from a possible 825. plFiberPlate : 45 possible sky positions to use as objects from a possible 824. plFiberPlate : 26 possible sky positions to use as objects from a possible 823. plFiberPlate : 20 possible sky positions to use as objects from a possible 822. plFiberPlate : 25 possible sky positions to use as objects from a possible 821. plFiberPlate : 22 possible sky positions to use as objects from a possible 820. plFiberPlate : 17 possible sky positions to use as objects from a possible 819. plFiberPlate : 22 possible sky positions to use as objects from a possible 818. plFiberPlate : 62 possible sky positions to use as objects from a possible 817. plFiberPlate : 51 possible sky positions to use as objects from a possible 816. plFiberPlate : 36 possible sky positions to use as objects from a possible 815. plFiberPlate : 23 possible sky positions to use as objects from a possible 814. plFiberPlate : 35 possible sky positions to use as objects from a possible 813. plFiberPlate : 13 possible sky positions to use as objects from a possible 812. plFiberPlate : 24 possible sky positions to use as objects from a possible 811. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 776 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2040.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2041.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2041.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2042.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 48 134 2 41 119 3 17 125 4 25 121 5 30 128 6 16 113 7 31 97 8 42 122 9 32 141 10 49 208 11 51 146 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 204 178 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 204 61 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 200 68 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 200 110 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 195 153 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 195 320 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 190 255 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 190 236 plFiberPlate : 153 possible sky positions to use as objects from a possible 686. plFiberPlate : 128 possible sky positions to use as objects from a possible 685. plFiberPlate : 86 possible sky positions to use as objects from a possible 684. plFiberPlate : 56 possible sky positions to use as objects from a possible 683. plFiberPlate : 32 possible sky positions to use as objects from a possible 682. plFiberPlate : 46 possible sky positions to use as objects from a possible 681. plFiberPlate : 56 possible sky positions to use as objects from a possible 680. plFiberPlate : 86 possible sky positions to use as objects from a possible 679. plFiberPlate : 58 possible sky positions to use as objects from a possible 678. plFiberPlate : 48 possible sky positions to use as objects from a possible 677. plFiberPlate : 29 possible sky positions to use as objects from a possible 676. plFiberPlate : 12 possible sky positions to use as objects from a possible 675. plFiberPlate : 22 possible sky positions to use as objects from a possible 674. plFiberPlate : 19 possible sky positions to use as objects from a possible 673. plFiberPlate : 14 possible sky positions to use as objects from a possible 672. plFiberPlate : 19 possible sky positions to use as objects from a possible 671. plFiberPlate : 76 possible sky positions to use as objects from a possible 670. plFiberPlate : 53 possible sky positions to use as objects from a possible 669. plFiberPlate : 44 possible sky positions to use as objects from a possible 668. plFiberPlate : 18 possible sky positions to use as objects from a possible 667. plFiberPlate : 20 possible sky positions to use as objects from a possible 666. plFiberPlate : 15 possible sky positions to use as objects from a possible 665. plFiberPlate : 13 possible sky positions to use as objects from a possible 664. plFiberPlate : 13 possible sky positions to use as objects from a possible 663. plFiberPlate : 14 possible sky positions to use as objects from a possible 662. plFiberPlate : 51 possible sky positions to use as objects from a possible 661. plFiberPlate : 37 possible sky positions to use as objects from a possible 660. plFiberPlate : 26 possible sky positions to use as objects from a possible 659. plFiberPlate : 15 possible sky positions to use as objects from a possible 658. plFiberPlate : 10 possible sky positions to use as objects from a possible 657. plFiberPlate : 12 possible sky positions to use as objects from a possible 656. plFiberPlate : 15 possible sky positions to use as objects from a possible 655. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 779 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2041.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2042.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2042.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2043.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 41 127 2 32 119 3 22 108 4 23 124 5 26 131 6 21 124 7 42 114 8 47 104 9 35 149 10 47 198 11 45 139 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 211 42 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 210 228 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 206 319 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 206 195 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 201 69 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 201 250 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 198 292 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 196 292 plFiberPlate : 133 possible sky positions to use as objects from a possible 688. plFiberPlate : 91 possible sky positions to use as objects from a possible 687. plFiberPlate : 52 possible sky positions to use as objects from a possible 686. plFiberPlate : 43 possible sky positions to use as objects from a possible 685. plFiberPlate : 36 possible sky positions to use as objects from a possible 684. plFiberPlate : 46 possible sky positions to use as objects from a possible 683. plFiberPlate : 36 possible sky positions to use as objects from a possible 682. plFiberPlate : 99 possible sky positions to use as objects from a possible 681. plFiberPlate : 76 possible sky positions to use as objects from a possible 680. plFiberPlate : 49 possible sky positions to use as objects from a possible 679. plFiberPlate : 42 possible sky positions to use as objects from a possible 678. plFiberPlate : 21 possible sky positions to use as objects from a possible 677. plFiberPlate : 23 possible sky positions to use as objects from a possible 676. plFiberPlate : 21 possible sky positions to use as objects from a possible 675. plFiberPlate : 25 possible sky positions to use as objects from a possible 674. plFiberPlate : 19 possible sky positions to use as objects from a possible 673. plFiberPlate : 67 possible sky positions to use as objects from a possible 672. plFiberPlate : 69 possible sky positions to use as objects from a possible 671. plFiberPlate : 45 possible sky positions to use as objects from a possible 670. plFiberPlate : 40 possible sky positions to use as objects from a possible 669. plFiberPlate : 25 possible sky positions to use as objects from a possible 668. plFiberPlate : 12 possible sky positions to use as objects from a possible 667. plFiberPlate : 20 possible sky positions to use as objects from a possible 666. plFiberPlate : 29 possible sky positions to use as objects from a possible 665. plFiberPlate : 22 possible sky positions to use as objects from a possible 664. plFiberPlate : 61 possible sky positions to use as objects from a possible 663. plFiberPlate : 42 possible sky positions to use as objects from a possible 662. plFiberPlate : 29 possible sky positions to use as objects from a possible 661. plFiberPlate : 23 possible sky positions to use as objects from a possible 660. plFiberPlate : 23 possible sky positions to use as objects from a possible 659. plFiberPlate : 12 possible sky positions to use as objects from a possible 658. plFiberPlate : 13 possible sky positions to use as objects from a possible 657. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 775 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2042.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2043.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2043.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2044.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 183 2 16 128 3 4 110 4 15 153 5 12 175 6 5 130 7 6 115 8 7 166 9 7 179 10 28 240 11 26 174 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4844 40 2 21 104 plFiberPlate : adding spectro-photo std with objId = 4844 40 1 20 71 plFiberPlate : adding spectro-photo std with objId = 4843 40 1 100 7 plFiberPlate : adding spectro-photo std with objId = 4843 40 4 98 176 plFiberPlate : adding spectro-photo std with objId = 4843 40 4 98 129 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 94 136 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 92 32 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 88 88 plFiberPlate : 188 possible sky positions to use as objects from a possible 866. plFiberPlate : 111 possible sky positions to use as objects from a possible 865. plFiberPlate : 67 possible sky positions to use as objects from a possible 864. plFiberPlate : 61 possible sky positions to use as objects from a possible 863. plFiberPlate : 33 possible sky positions to use as objects from a possible 862. plFiberPlate : 43 possible sky positions to use as objects from a possible 861. plFiberPlate : 72 possible sky positions to use as objects from a possible 860. plFiberPlate : 126 possible sky positions to use as objects from a possible 859. plFiberPlate : 96 possible sky positions to use as objects from a possible 858. plFiberPlate : 64 possible sky positions to use as objects from a possible 857. plFiberPlate : 40 possible sky positions to use as objects from a possible 856. plFiberPlate : 23 possible sky positions to use as objects from a possible 855. plFiberPlate : 24 possible sky positions to use as objects from a possible 854. plFiberPlate : 25 possible sky positions to use as objects from a possible 853. plFiberPlate : 29 possible sky positions to use as objects from a possible 852. plFiberPlate : 23 possible sky positions to use as objects from a possible 851. plFiberPlate : 105 possible sky positions to use as objects from a possible 850. plFiberPlate : 102 possible sky positions to use as objects from a possible 849. plFiberPlate : 63 possible sky positions to use as objects from a possible 848. plFiberPlate : 46 possible sky positions to use as objects from a possible 847. plFiberPlate : 26 possible sky positions to use as objects from a possible 846. plFiberPlate : 30 possible sky positions to use as objects from a possible 845. plFiberPlate : 26 possible sky positions to use as objects from a possible 844. plFiberPlate : 27 possible sky positions to use as objects from a possible 843. plFiberPlate : 31 possible sky positions to use as objects from a possible 842. plFiberPlate : 64 possible sky positions to use as objects from a possible 841. plFiberPlate : 50 possible sky positions to use as objects from a possible 840. plFiberPlate : 36 possible sky positions to use as objects from a possible 839. plFiberPlate : 20 possible sky positions to use as objects from a possible 838. plFiberPlate : 30 possible sky positions to use as objects from a possible 837. plFiberPlate : 27 possible sky positions to use as objects from a possible 836. plFiberPlate : 27 possible sky positions to use as objects from a possible 835. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 732 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2043.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2044.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2044.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2045.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 192 2 6 129 3 4 123 4 3 169 5 4 190 6 6 119 7 3 113 8 1 170 9 4 179 10 8 250 11 7 177 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2738 40 6 119 53 plFiberPlate : adding spectro-photo std with objId = 2738 40 6 114 20 plFiberPlate : adding spectro-photo std with objId = 2738 40 2 110 60 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 305 44 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 303 46 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 302 140 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 302 111 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 301 37 plFiberPlate : 175 possible sky positions to use as objects from a possible 883. plFiberPlate : 111 possible sky positions to use as objects from a possible 882. plFiberPlate : 57 possible sky positions to use as objects from a possible 881. plFiberPlate : 71 possible sky positions to use as objects from a possible 880. plFiberPlate : 53 possible sky positions to use as objects from a possible 879. plFiberPlate : 38 possible sky positions to use as objects from a possible 878. plFiberPlate : 63 possible sky positions to use as objects from a possible 877. plFiberPlate : 121 possible sky positions to use as objects from a possible 876. plFiberPlate : 111 possible sky positions to use as objects from a possible 875. plFiberPlate : 72 possible sky positions to use as objects from a possible 874. plFiberPlate : 28 possible sky positions to use as objects from a possible 873. plFiberPlate : 31 possible sky positions to use as objects from a possible 872. plFiberPlate : 22 possible sky positions to use as objects from a possible 871. plFiberPlate : 27 possible sky positions to use as objects from a possible 870. plFiberPlate : 23 possible sky positions to use as objects from a possible 869. plFiberPlate : 22 possible sky positions to use as objects from a possible 868. plFiberPlate : 140 possible sky positions to use as objects from a possible 867. plFiberPlate : 98 possible sky positions to use as objects from a possible 866. plFiberPlate : 79 possible sky positions to use as objects from a possible 865. plFiberPlate : 65 possible sky positions to use as objects from a possible 864. plFiberPlate : 28 possible sky positions to use as objects from a possible 863. plFiberPlate : 35 possible sky positions to use as objects from a possible 862. plFiberPlate : 36 possible sky positions to use as objects from a possible 861. plFiberPlate : 25 possible sky positions to use as objects from a possible 860. plFiberPlate : 23 possible sky positions to use as objects from a possible 859. plFiberPlate : 83 possible sky positions to use as objects from a possible 858. plFiberPlate : 57 possible sky positions to use as objects from a possible 857. plFiberPlate : 31 possible sky positions to use as objects from a possible 856. plFiberPlate : 15 possible sky positions to use as objects from a possible 855. plFiberPlate : 25 possible sky positions to use as objects from a possible 854. plFiberPlate : 27 possible sky positions to use as objects from a possible 853. plFiberPlate : 22 possible sky positions to use as objects from a possible 852. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 697 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2044.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2045.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2045.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2046.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 185 2 23 118 3 9 111 4 18 154 5 9 165 6 6 116 7 8 113 8 5 163 9 9 163 10 31 227 11 29 170 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 146 45 plFiberPlate : adding spectro-photo std with objId = 4843 40 5 138 183 plFiberPlate : adding spectro-photo std with objId = 4843 40 1 138 54 plFiberPlate : adding spectro-photo std with objId = 4843 40 5 137 63 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 135 98 plFiberPlate : adding spectro-photo std with objId = 4843 40 3 134 50 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 134 109 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 133 35 plFiberPlate : 170 possible sky positions to use as objects from a possible 837. plFiberPlate : 121 possible sky positions to use as objects from a possible 836. plFiberPlate : 63 possible sky positions to use as objects from a possible 835. plFiberPlate : 40 possible sky positions to use as objects from a possible 834. plFiberPlate : 32 possible sky positions to use as objects from a possible 833. plFiberPlate : 68 possible sky positions to use as objects from a possible 832. plFiberPlate : 50 possible sky positions to use as objects from a possible 831. plFiberPlate : 141 possible sky positions to use as objects from a possible 830. plFiberPlate : 90 possible sky positions to use as objects from a possible 829. plFiberPlate : 82 possible sky positions to use as objects from a possible 828. plFiberPlate : 43 possible sky positions to use as objects from a possible 827. plFiberPlate : 24 possible sky positions to use as objects from a possible 826. plFiberPlate : 33 possible sky positions to use as objects from a possible 825. plFiberPlate : 31 possible sky positions to use as objects from a possible 824. plFiberPlate : 31 possible sky positions to use as objects from a possible 823. plFiberPlate : 31 possible sky positions to use as objects from a possible 822. plFiberPlate : 116 possible sky positions to use as objects from a possible 821. plFiberPlate : 99 possible sky positions to use as objects from a possible 820. plFiberPlate : 64 possible sky positions to use as objects from a possible 819. plFiberPlate : 41 possible sky positions to use as objects from a possible 818. plFiberPlate : 17 possible sky positions to use as objects from a possible 817. plFiberPlate : 31 possible sky positions to use as objects from a possible 816. plFiberPlate : 34 possible sky positions to use as objects from a possible 815. plFiberPlate : 35 possible sky positions to use as objects from a possible 814. plFiberPlate : 7 possible sky positions to use as objects from a possible 813. plFiberPlate : 68 possible sky positions to use as objects from a possible 812. plFiberPlate : 58 possible sky positions to use as objects from a possible 811. plFiberPlate : 43 possible sky positions to use as objects from a possible 810. plFiberPlate : 22 possible sky positions to use as objects from a possible 809. plFiberPlate : 24 possible sky positions to use as objects from a possible 808. plFiberPlate : 27 possible sky positions to use as objects from a possible 807. plFiberPlate : 29 possible sky positions to use as objects from a possible 806. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 730 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2045.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2046.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2046.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2047.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 182 2 3 128 3 6 120 4 8 166 5 3 188 6 3 118 7 2 123 8 3 169 9 3 170 10 6 238 11 4 177 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1045 40 5 18 42 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 336 27 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 335 14 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 332 22 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 326 45 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 325 133 plFiberPlate : adding spectro-photo std with objId = 1045 40 1 15 42 plFiberPlate : adding spectro-photo std with objId = 1045 40 2 15 43 plFiberPlate : 191 possible sky positions to use as objects from a possible 865. plFiberPlate : 137 possible sky positions to use as objects from a possible 864. plFiberPlate : 60 possible sky positions to use as objects from a possible 863. plFiberPlate : 41 possible sky positions to use as objects from a possible 862. plFiberPlate : 56 possible sky positions to use as objects from a possible 861. plFiberPlate : 40 possible sky positions to use as objects from a possible 860. plFiberPlate : 59 possible sky positions to use as objects from a possible 859. plFiberPlate : 106 possible sky positions to use as objects from a possible 858. plFiberPlate : 63 possible sky positions to use as objects from a possible 857. plFiberPlate : 63 possible sky positions to use as objects from a possible 856. plFiberPlate : 32 possible sky positions to use as objects from a possible 855. plFiberPlate : 15 possible sky positions to use as objects from a possible 854. plFiberPlate : 25 possible sky positions to use as objects from a possible 853. plFiberPlate : 20 possible sky positions to use as objects from a possible 852. plFiberPlate : 28 possible sky positions to use as objects from a possible 851. plFiberPlate : 19 possible sky positions to use as objects from a possible 850. plFiberPlate : 125 possible sky positions to use as objects from a possible 849. plFiberPlate : 93 possible sky positions to use as objects from a possible 848. plFiberPlate : 67 possible sky positions to use as objects from a possible 847. plFiberPlate : 23 possible sky positions to use as objects from a possible 846. plFiberPlate : 27 possible sky positions to use as objects from a possible 845. plFiberPlate : 18 possible sky positions to use as objects from a possible 844. plFiberPlate : 25 possible sky positions to use as objects from a possible 843. plFiberPlate : 17 possible sky positions to use as objects from a possible 842. plFiberPlate : 21 possible sky positions to use as objects from a possible 841. plFiberPlate : 63 possible sky positions to use as objects from a possible 840. plFiberPlate : 53 possible sky positions to use as objects from a possible 839. plFiberPlate : 33 possible sky positions to use as objects from a possible 838. plFiberPlate : 18 possible sky positions to use as objects from a possible 837. plFiberPlate : 20 possible sky positions to use as objects from a possible 836. plFiberPlate : 22 possible sky positions to use as objects from a possible 835. plFiberPlate : 34 possible sky positions to use as objects from a possible 834. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 695 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2046.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2047.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2047.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2048.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 178 2 8 119 3 8 117 4 10 166 5 6 192 6 5 122 7 8 122 8 11 165 9 8 184 10 17 236 11 11 170 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2738 40 3 222 75 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 427 87 plFiberPlate : adding spectro-photo std with objId = 3325 41 1 426 69 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 420 144 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 420 11 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 418 11 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 413 129 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 413 99 plFiberPlate : 181 possible sky positions to use as objects from a possible 852. plFiberPlate : 129 possible sky positions to use as objects from a possible 851. plFiberPlate : 71 possible sky positions to use as objects from a possible 850. plFiberPlate : 82 possible sky positions to use as objects from a possible 849. plFiberPlate : 47 possible sky positions to use as objects from a possible 848. plFiberPlate : 33 possible sky positions to use as objects from a possible 847. plFiberPlate : 53 possible sky positions to use as objects from a possible 846. plFiberPlate : 100 possible sky positions to use as objects from a possible 845. plFiberPlate : 80 possible sky positions to use as objects from a possible 844. plFiberPlate : 58 possible sky positions to use as objects from a possible 843. plFiberPlate : 30 possible sky positions to use as objects from a possible 842. plFiberPlate : 14 possible sky positions to use as objects from a possible 841. plFiberPlate : 41 possible sky positions to use as objects from a possible 840. plFiberPlate : 24 possible sky positions to use as objects from a possible 839. plFiberPlate : 22 possible sky positions to use as objects from a possible 838. plFiberPlate : 23 possible sky positions to use as objects from a possible 837. plFiberPlate : 121 possible sky positions to use as objects from a possible 836. plFiberPlate : 85 possible sky positions to use as objects from a possible 835. plFiberPlate : 64 possible sky positions to use as objects from a possible 834. plFiberPlate : 30 possible sky positions to use as objects from a possible 833. plFiberPlate : 27 possible sky positions to use as objects from a possible 832. plFiberPlate : 30 possible sky positions to use as objects from a possible 831. plFiberPlate : 20 possible sky positions to use as objects from a possible 830. plFiberPlate : 22 possible sky positions to use as objects from a possible 829. plFiberPlate : 25 possible sky positions to use as objects from a possible 828. plFiberPlate : 73 possible sky positions to use as objects from a possible 827. plFiberPlate : 54 possible sky positions to use as objects from a possible 826. plFiberPlate : 47 possible sky positions to use as objects from a possible 825. plFiberPlate : 33 possible sky positions to use as objects from a possible 824. plFiberPlate : 26 possible sky positions to use as objects from a possible 823. plFiberPlate : 21 possible sky positions to use as objects from a possible 822. plFiberPlate : 22 possible sky positions to use as objects from a possible 821. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 703 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2047.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2048.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2048.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2049.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 184 2 13 129 3 15 115 4 18 163 5 5 187 6 4 123 7 5 122 8 3 146 9 9 179 10 24 241 11 21 186 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2738 40 6 268 60 plFiberPlate : adding spectro-photo std with objId = 2738 40 1 266 44 plFiberPlate : adding spectro-photo std with objId = 2738 40 2 263 117 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 469 33 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 461 55 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 461 47 plFiberPlate : adding spectro-photo std with objId = 3325 41 5 460 19 plFiberPlate : adding spectro-photo std with objId = 3325 41 5 456 43 plFiberPlate : 182 possible sky positions to use as objects from a possible 861. plFiberPlate : 102 possible sky positions to use as objects from a possible 860. plFiberPlate : 59 possible sky positions to use as objects from a possible 859. plFiberPlate : 25 possible sky positions to use as objects from a possible 858. plFiberPlate : 54 possible sky positions to use as objects from a possible 857. plFiberPlate : 75 possible sky positions to use as objects from a possible 856. plFiberPlate : 40 possible sky positions to use as objects from a possible 855. plFiberPlate : 126 possible sky positions to use as objects from a possible 854. plFiberPlate : 110 possible sky positions to use as objects from a possible 853. plFiberPlate : 71 possible sky positions to use as objects from a possible 852. plFiberPlate : 42 possible sky positions to use as objects from a possible 851. plFiberPlate : 19 possible sky positions to use as objects from a possible 850. plFiberPlate : 24 possible sky positions to use as objects from a possible 849. plFiberPlate : 29 possible sky positions to use as objects from a possible 848. plFiberPlate : 23 possible sky positions to use as objects from a possible 847. plFiberPlate : 25 possible sky positions to use as objects from a possible 846. plFiberPlate : 144 possible sky positions to use as objects from a possible 845. plFiberPlate : 105 possible sky positions to use as objects from a possible 844. plFiberPlate : 80 possible sky positions to use as objects from a possible 843. plFiberPlate : 54 possible sky positions to use as objects from a possible 842. plFiberPlate : 36 possible sky positions to use as objects from a possible 841. plFiberPlate : 32 possible sky positions to use as objects from a possible 840. plFiberPlate : 28 possible sky positions to use as objects from a possible 839. plFiberPlate : 19 possible sky positions to use as objects from a possible 838. plFiberPlate : 27 possible sky positions to use as objects from a possible 837. plFiberPlate : 63 possible sky positions to use as objects from a possible 836. plFiberPlate : 59 possible sky positions to use as objects from a possible 835. plFiberPlate : 34 possible sky positions to use as objects from a possible 834. plFiberPlate : 20 possible sky positions to use as objects from a possible 833. plFiberPlate : 23 possible sky positions to use as objects from a possible 832. plFiberPlate : 31 possible sky positions to use as objects from a possible 831. plFiberPlate : 18 possible sky positions to use as objects from a possible 830. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 692 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2048.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2049.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2049.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2050.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 170 2 8 118 3 8 123 4 13 157 5 13 171 6 9 127 7 9 122 8 13 148 9 11 188 10 15 235 11 13 171 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 458 103 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 451 83 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 448 39 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 444 68 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 443 64 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 443 70 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 443 124 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 442 29 plFiberPlate : 192 possible sky positions to use as objects from a possible 849. plFiberPlate : 119 possible sky positions to use as objects from a possible 848. plFiberPlate : 77 possible sky positions to use as objects from a possible 847. plFiberPlate : 62 possible sky positions to use as objects from a possible 846. plFiberPlate : 33 possible sky positions to use as objects from a possible 845. plFiberPlate : 42 possible sky positions to use as objects from a possible 844. plFiberPlate : 68 possible sky positions to use as objects from a possible 843. plFiberPlate : 117 possible sky positions to use as objects from a possible 842. plFiberPlate : 81 possible sky positions to use as objects from a possible 841. plFiberPlate : 62 possible sky positions to use as objects from a possible 840. plFiberPlate : 35 possible sky positions to use as objects from a possible 839. plFiberPlate : 28 possible sky positions to use as objects from a possible 838. plFiberPlate : 18 possible sky positions to use as objects from a possible 837. plFiberPlate : 22 possible sky positions to use as objects from a possible 836. plFiberPlate : 27 possible sky positions to use as objects from a possible 835. plFiberPlate : 22 possible sky positions to use as objects from a possible 834. plFiberPlate : 92 possible sky positions to use as objects from a possible 833. plFiberPlate : 79 possible sky positions to use as objects from a possible 832. plFiberPlate : 57 possible sky positions to use as objects from a possible 831. plFiberPlate : 20 possible sky positions to use as objects from a possible 830. plFiberPlate : 26 possible sky positions to use as objects from a possible 829. plFiberPlate : 18 possible sky positions to use as objects from a possible 828. plFiberPlate : 21 possible sky positions to use as objects from a possible 827. plFiberPlate : 17 possible sky positions to use as objects from a possible 826. plFiberPlate : 20 possible sky positions to use as objects from a possible 825. plFiberPlate : 65 possible sky positions to use as objects from a possible 824. plFiberPlate : 72 possible sky positions to use as objects from a possible 823. plFiberPlate : 43 possible sky positions to use as objects from a possible 822. plFiberPlate : 43 possible sky positions to use as objects from a possible 821. plFiberPlate : 24 possible sky positions to use as objects from a possible 820. plFiberPlate : 24 possible sky positions to use as objects from a possible 819. plFiberPlate : 28 possible sky positions to use as objects from a possible 818. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 704 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2049.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2050.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2050.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2051.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 171 2 15 110 3 13 116 4 15 158 5 13 185 6 10 119 7 13 127 8 12 155 9 14 179 10 25 230 11 18 159 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 479 25 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 475 20 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 474 57 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 473 73 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 471 2 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 469 116 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 469 53 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 467 71 plFiberPlate : 166 possible sky positions to use as objects from a possible 845. plFiberPlate : 110 possible sky positions to use as objects from a possible 844. plFiberPlate : 89 possible sky positions to use as objects from a possible 843. plFiberPlate : 48 possible sky positions to use as objects from a possible 842. plFiberPlate : 48 possible sky positions to use as objects from a possible 841. plFiberPlate : 41 possible sky positions to use as objects from a possible 840. plFiberPlate : 74 possible sky positions to use as objects from a possible 839. plFiberPlate : 98 possible sky positions to use as objects from a possible 838. plFiberPlate : 87 possible sky positions to use as objects from a possible 837. plFiberPlate : 58 possible sky positions to use as objects from a possible 836. plFiberPlate : 41 possible sky positions to use as objects from a possible 835. plFiberPlate : 25 possible sky positions to use as objects from a possible 834. plFiberPlate : 11 possible sky positions to use as objects from a possible 833. plFiberPlate : 34 possible sky positions to use as objects from a possible 832. plFiberPlate : 20 possible sky positions to use as objects from a possible 831. plFiberPlate : 30 possible sky positions to use as objects from a possible 830. plFiberPlate : 88 possible sky positions to use as objects from a possible 829. plFiberPlate : 91 possible sky positions to use as objects from a possible 828. plFiberPlate : 67 possible sky positions to use as objects from a possible 827. plFiberPlate : 42 possible sky positions to use as objects from a possible 826. plFiberPlate : 29 possible sky positions to use as objects from a possible 825. plFiberPlate : 24 possible sky positions to use as objects from a possible 824. plFiberPlate : 32 possible sky positions to use as objects from a possible 823. plFiberPlate : 17 possible sky positions to use as objects from a possible 822. plFiberPlate : 14 possible sky positions to use as objects from a possible 821. plFiberPlate : 56 possible sky positions to use as objects from a possible 820. plFiberPlate : 48 possible sky positions to use as objects from a possible 819. plFiberPlate : 30 possible sky positions to use as objects from a possible 818. plFiberPlate : 16 possible sky positions to use as objects from a possible 817. plFiberPlate : 35 possible sky positions to use as objects from a possible 816. plFiberPlate : 15 possible sky positions to use as objects from a possible 815. plFiberPlate : 31 possible sky positions to use as objects from a possible 814. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 700 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2050.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2051.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2051.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2052.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 37 117 2 25 77 3 30 77 4 45 113 5 29 149 6 35 98 7 31 92 8 34 128 9 45 136 10 49 160 11 34 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 40 6 48 41 plFiberPlate : adding spectro-photo std with objId = 2960 40 6 47 475 plFiberPlate : adding spectro-photo std with objId = 2960 40 2 47 274 plFiberPlate : adding spectro-photo std with objId = 2960 40 2 47 46 plFiberPlate : adding spectro-photo std with objId = 2960 40 4 46 367 plFiberPlate : adding spectro-photo std with objId = 2960 40 4 46 152 plFiberPlate : adding spectro-photo std with objId = 2960 40 3 46 131 plFiberPlate : adding spectro-photo std with objId = 2960 40 2 46 360 plFiberPlate : 130 possible sky positions to use as objects from a possible 617. plFiberPlate : 79 possible sky positions to use as objects from a possible 616. plFiberPlate : 58 possible sky positions to use as objects from a possible 615. plFiberPlate : 44 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 21 possible sky positions to use as objects from a possible 612. plFiberPlate : 56 possible sky positions to use as objects from a possible 611. plFiberPlate : 89 possible sky positions to use as objects from a possible 610. plFiberPlate : 56 possible sky positions to use as objects from a possible 609. plFiberPlate : 33 possible sky positions to use as objects from a possible 608. plFiberPlate : 11 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 18 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 12 possible sky positions to use as objects from a possible 603. plFiberPlate : 14 possible sky positions to use as objects from a possible 602. plFiberPlate : 84 possible sky positions to use as objects from a possible 601. plFiberPlate : 68 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 17 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 69 possible sky positions to use as objects from a possible 592. plFiberPlate : 47 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 22 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 807 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2051.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2052.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2052.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2053.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 140 2 31 128 3 26 117 4 20 145 5 28 141 6 22 123 7 23 127 8 32 148 9 33 164 10 61 207 11 42 142 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 36 67 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 36 268 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 30 266 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 29 274 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 26 260 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 25 306 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 23 228 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 23 30 plFiberPlate : 172 possible sky positions to use as objects from a possible 784. plFiberPlate : 126 possible sky positions to use as objects from a possible 783. plFiberPlate : 100 possible sky positions to use as objects from a possible 782. plFiberPlate : 57 possible sky positions to use as objects from a possible 781. plFiberPlate : 29 possible sky positions to use as objects from a possible 780. plFiberPlate : 34 possible sky positions to use as objects from a possible 779. plFiberPlate : 67 possible sky positions to use as objects from a possible 778. plFiberPlate : 95 possible sky positions to use as objects from a possible 777. plFiberPlate : 83 possible sky positions to use as objects from a possible 776. plFiberPlate : 66 possible sky positions to use as objects from a possible 775. plFiberPlate : 38 possible sky positions to use as objects from a possible 774. plFiberPlate : 25 possible sky positions to use as objects from a possible 773. plFiberPlate : 13 possible sky positions to use as objects from a possible 772. plFiberPlate : 14 possible sky positions to use as objects from a possible 771. plFiberPlate : 22 possible sky positions to use as objects from a possible 770. plFiberPlate : 32 possible sky positions to use as objects from a possible 769. plFiberPlate : 81 possible sky positions to use as objects from a possible 768. plFiberPlate : 83 possible sky positions to use as objects from a possible 767. plFiberPlate : 55 possible sky positions to use as objects from a possible 766. plFiberPlate : 38 possible sky positions to use as objects from a possible 765. plFiberPlate : 14 possible sky positions to use as objects from a possible 764. plFiberPlate : 32 possible sky positions to use as objects from a possible 763. plFiberPlate : 14 possible sky positions to use as objects from a possible 762. plFiberPlate : 16 possible sky positions to use as objects from a possible 761. plFiberPlate : 17 possible sky positions to use as objects from a possible 760. plFiberPlate : 59 possible sky positions to use as objects from a possible 759. plFiberPlate : 42 possible sky positions to use as objects from a possible 758. plFiberPlate : 20 possible sky positions to use as objects from a possible 757. plFiberPlate : 14 possible sky positions to use as objects from a possible 756. plFiberPlate : 23 possible sky positions to use as objects from a possible 755. plFiberPlate : 19 possible sky positions to use as objects from a possible 754. plFiberPlate : 21 possible sky positions to use as objects from a possible 753. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 763 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2052.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2053.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2053.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2054.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 136 2 27 105 3 30 110 4 19 122 5 19 133 6 12 115 7 9 120 8 29 128 9 12 144 10 46 198 11 37 139 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 25 257 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 24 73 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 19 115 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 19 81 plFiberPlate : adding spectro-photo std with objId = 3635 41 4 18 491 plFiberPlate : adding spectro-photo std with objId = 3635 41 5 17 68 plFiberPlate : adding spectro-photo std with objId = 3635 41 3 17 52 plFiberPlate : adding spectro-photo std with objId = 3635 41 4 16 207 plFiberPlate : 147 possible sky positions to use as objects from a possible 710. plFiberPlate : 109 possible sky positions to use as objects from a possible 709. plFiberPlate : 83 possible sky positions to use as objects from a possible 708. plFiberPlate : 43 possible sky positions to use as objects from a possible 707. plFiberPlate : 32 possible sky positions to use as objects from a possible 706. plFiberPlate : 28 possible sky positions to use as objects from a possible 705. plFiberPlate : 60 possible sky positions to use as objects from a possible 704. plFiberPlate : 100 possible sky positions to use as objects from a possible 703. plFiberPlate : 77 possible sky positions to use as objects from a possible 702. plFiberPlate : 42 possible sky positions to use as objects from a possible 701. plFiberPlate : 24 possible sky positions to use as objects from a possible 700. plFiberPlate : 21 possible sky positions to use as objects from a possible 699. plFiberPlate : 21 possible sky positions to use as objects from a possible 698. plFiberPlate : 21 possible sky positions to use as objects from a possible 697. plFiberPlate : 16 possible sky positions to use as objects from a possible 696. plFiberPlate : 31 possible sky positions to use as objects from a possible 695. plFiberPlate : 89 possible sky positions to use as objects from a possible 694. plFiberPlate : 68 possible sky positions to use as objects from a possible 693. plFiberPlate : 45 possible sky positions to use as objects from a possible 692. plFiberPlate : 29 possible sky positions to use as objects from a possible 691. plFiberPlate : 19 possible sky positions to use as objects from a possible 690. plFiberPlate : 23 possible sky positions to use as objects from a possible 689. plFiberPlate : 10 possible sky positions to use as objects from a possible 688. plFiberPlate : 11 possible sky positions to use as objects from a possible 687. plFiberPlate : 17 possible sky positions to use as objects from a possible 686. plFiberPlate : 81 possible sky positions to use as objects from a possible 685. plFiberPlate : 52 possible sky positions to use as objects from a possible 684. plFiberPlate : 35 possible sky positions to use as objects from a possible 683. plFiberPlate : 25 possible sky positions to use as objects from a possible 682. plFiberPlate : 36 possible sky positions to use as objects from a possible 681. plFiberPlate : 16 possible sky positions to use as objects from a possible 680. plFiberPlate : 30 possible sky positions to use as objects from a possible 679. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 806 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2053.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2054.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2054.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2055.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 135 2 32 112 3 26 131 4 27 154 5 22 136 6 21 119 7 25 128 8 31 148 9 31 165 10 47 213 11 32 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 72 90 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 71 221 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 66 97 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 66 20 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 64 43 plFiberPlate : adding spectro-photo std with objId = 2740 40 5 64 118 plFiberPlate : adding spectro-photo std with objId = 2740 40 2 64 145 plFiberPlate : adding spectro-photo std with objId = 2740 40 3 61 213 plFiberPlate : 169 possible sky positions to use as objects from a possible 775. plFiberPlate : 111 possible sky positions to use as objects from a possible 774. plFiberPlate : 65 possible sky positions to use as objects from a possible 773. plFiberPlate : 40 possible sky positions to use as objects from a possible 772. plFiberPlate : 37 possible sky positions to use as objects from a possible 771. plFiberPlate : 25 possible sky positions to use as objects from a possible 770. plFiberPlate : 65 possible sky positions to use as objects from a possible 769. plFiberPlate : 98 possible sky positions to use as objects from a possible 768. plFiberPlate : 81 possible sky positions to use as objects from a possible 767. plFiberPlate : 54 possible sky positions to use as objects from a possible 766. plFiberPlate : 34 possible sky positions to use as objects from a possible 765. plFiberPlate : 22 possible sky positions to use as objects from a possible 764. plFiberPlate : 19 possible sky positions to use as objects from a possible 763. plFiberPlate : 27 possible sky positions to use as objects from a possible 762. plFiberPlate : 21 possible sky positions to use as objects from a possible 761. plFiberPlate : 32 possible sky positions to use as objects from a possible 760. plFiberPlate : 77 possible sky positions to use as objects from a possible 759. plFiberPlate : 81 possible sky positions to use as objects from a possible 758. plFiberPlate : 55 possible sky positions to use as objects from a possible 757. plFiberPlate : 22 possible sky positions to use as objects from a possible 756. plFiberPlate : 12 possible sky positions to use as objects from a possible 755. plFiberPlate : 17 possible sky positions to use as objects from a possible 754. plFiberPlate : 15 possible sky positions to use as objects from a possible 753. plFiberPlate : 26 possible sky positions to use as objects from a possible 752. plFiberPlate : 20 possible sky positions to use as objects from a possible 751. plFiberPlate : 33 possible sky positions to use as objects from a possible 750. plFiberPlate : 59 possible sky positions to use as objects from a possible 749. plFiberPlate : 29 possible sky positions to use as objects from a possible 748. plFiberPlate : 31 possible sky positions to use as objects from a possible 747. plFiberPlate : 31 possible sky positions to use as objects from a possible 746. plFiberPlate : 20 possible sky positions to use as objects from a possible 745. plFiberPlate : 32 possible sky positions to use as objects from a possible 744. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 768 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2054.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2055.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2055.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2056.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 134 2 21 84 3 23 79 4 20 99 5 7 142 6 11 104 7 7 105 8 6 138 9 4 160 10 37 166 11 26 121 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 25 352 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 24 445 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 24 344 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 24 451 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 24 508 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 22 422 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 21 457 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 21 425 plFiberPlate : 127 possible sky positions to use as objects from a possible 666. plFiberPlate : 87 possible sky positions to use as objects from a possible 665. plFiberPlate : 66 possible sky positions to use as objects from a possible 664. plFiberPlate : 42 possible sky positions to use as objects from a possible 663. plFiberPlate : 35 possible sky positions to use as objects from a possible 662. plFiberPlate : 57 possible sky positions to use as objects from a possible 661. plFiberPlate : 47 possible sky positions to use as objects from a possible 660. plFiberPlate : 83 possible sky positions to use as objects from a possible 659. plFiberPlate : 71 possible sky positions to use as objects from a possible 658. plFiberPlate : 51 possible sky positions to use as objects from a possible 657. plFiberPlate : 37 possible sky positions to use as objects from a possible 656. plFiberPlate : 19 possible sky positions to use as objects from a possible 655. plFiberPlate : 13 possible sky positions to use as objects from a possible 654. plFiberPlate : 20 possible sky positions to use as objects from a possible 653. plFiberPlate : 23 possible sky positions to use as objects from a possible 652. plFiberPlate : 31 possible sky positions to use as objects from a possible 651. plFiberPlate : 89 possible sky positions to use as objects from a possible 650. plFiberPlate : 73 possible sky positions to use as objects from a possible 649. plFiberPlate : 54 possible sky positions to use as objects from a possible 648. plFiberPlate : 38 possible sky positions to use as objects from a possible 647. plFiberPlate : 24 possible sky positions to use as objects from a possible 646. plFiberPlate : 19 possible sky positions to use as objects from a possible 645. plFiberPlate : 37 possible sky positions to use as objects from a possible 644. plFiberPlate : 19 possible sky positions to use as objects from a possible 643. plFiberPlate : 18 possible sky positions to use as objects from a possible 642. plFiberPlate : 63 possible sky positions to use as objects from a possible 641. plFiberPlate : 58 possible sky positions to use as objects from a possible 640. plFiberPlate : 34 possible sky positions to use as objects from a possible 639. plFiberPlate : 23 possible sky positions to use as objects from a possible 638. plFiberPlate : 26 possible sky positions to use as objects from a possible 637. plFiberPlate : 24 possible sky positions to use as objects from a possible 636. plFiberPlate : 39 possible sky positions to use as objects from a possible 635. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 729 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2055.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2056.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2056.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.1/plPlugMapP-2057.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 42 156 2 36 99 3 32 89 4 30 123 5 25 125 6 20 98 7 16 108 8 20 143 9 25 153 10 64 170 11 44 135 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1239 40 6 19 4 plFiberPlate : adding spectro-photo std with objId = 1239 40 2 19 61 plFiberPlate : adding spectro-photo std with objId = 1239 40 2 18 335 plFiberPlate : adding spectro-photo std with objId = 1239 40 6 17 71 plFiberPlate : adding spectro-photo std with objId = 1239 40 3 17 266 plFiberPlate : adding spectro-photo std with objId = 1239 40 4 15 358 plFiberPlate : adding spectro-photo std with objId = 1239 40 4 15 115 plFiberPlate : adding spectro-photo std with objId = 1239 40 3 15 339 plFiberPlate : 110 possible sky positions to use as objects from a possible 678. plFiberPlate : 82 possible sky positions to use as objects from a possible 677. plFiberPlate : 36 possible sky positions to use as objects from a possible 676. plFiberPlate : 41 possible sky positions to use as objects from a possible 675. plFiberPlate : 38 possible sky positions to use as objects from a possible 674. plFiberPlate : 30 possible sky positions to use as objects from a possible 673. plFiberPlate : 54 possible sky positions to use as objects from a possible 672. plFiberPlate : 85 possible sky positions to use as objects from a possible 671. plFiberPlate : 60 possible sky positions to use as objects from a possible 670. plFiberPlate : 44 possible sky positions to use as objects from a possible 669. plFiberPlate : 30 possible sky positions to use as objects from a possible 668. plFiberPlate : 12 possible sky positions to use as objects from a possible 667. plFiberPlate : 21 possible sky positions to use as objects from a possible 666. plFiberPlate : 27 possible sky positions to use as objects from a possible 665. plFiberPlate : 20 possible sky positions to use as objects from a possible 664. plFiberPlate : 13 possible sky positions to use as objects from a possible 663. plFiberPlate : 63 possible sky positions to use as objects from a possible 662. plFiberPlate : 64 possible sky positions to use as objects from a possible 661. plFiberPlate : 51 possible sky positions to use as objects from a possible 660. plFiberPlate : 36 possible sky positions to use as objects from a possible 659. plFiberPlate : 20 possible sky positions to use as objects from a possible 658. plFiberPlate : 26 possible sky positions to use as objects from a possible 657. plFiberPlate : 20 possible sky positions to use as objects from a possible 656. plFiberPlate : 25 possible sky positions to use as objects from a possible 655. plFiberPlate : 22 possible sky positions to use as objects from a possible 654. plFiberPlate : 60 possible sky positions to use as objects from a possible 653. plFiberPlate : 45 possible sky positions to use as objects from a possible 652. plFiberPlate : 18 possible sky positions to use as objects from a possible 651. plFiberPlate : 13 possible sky positions to use as objects from a possible 650. plFiberPlate : 18 possible sky positions to use as objects from a possible 649. plFiberPlate : 20 possible sky positions to use as objects from a possible 648. plFiberPlate : 26 possible sky positions to use as objects from a possible 647. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 732 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2056.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2057.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.1/plOverlay-2057.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Oct 22 19:20:54 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 20 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 87 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2038.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2038.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2038.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 31 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2039.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2039.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2039.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 83 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2040.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2040.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2040.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 114 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2041.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2041.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.5437,-9.2287) and (2.37,-12.07) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2041.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 117 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2042.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2042.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.6505,9.7447) and (-11.72,4.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2042.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 113 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2043.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2043.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2043.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 70 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2044.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2044.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2044.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 35 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2045.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2045.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2045.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 68 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2046.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2046.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2046.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 33 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2047.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2047.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2047.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 41 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2048.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2048.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.8941,8.7612) and (-11.52,3.65) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2048.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 30 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2049.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2049.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2049.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 42 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2050.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2050.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2050.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 38 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2051.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2051.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2051.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 145 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2052.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2052.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2052.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 101 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2053.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2053.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2053.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 144 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2054.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2054.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2054.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 106 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2055.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2055.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2055.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 67 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2056.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2056.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2056.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 70 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2057.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2057.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.1/plFanuc-2057.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Oct 22 19:21:47 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8c4dbf4 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 20 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2038 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 749 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2039 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 693 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2040 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 745 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2041 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 776 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2042 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 779 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2043 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 775 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2044 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 732 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2045 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 697 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2046 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 730 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2047 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 695 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2048 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 703 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2049 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 692 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2050 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 704 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2051 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 700 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2052 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 807 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2053 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 763 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2054 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 806 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2055 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 768 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2056 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 729 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2057 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 732 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Oct 22 19:22:04 CDT 2004 Begin running "plateEnder dr2004.10.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.10.1 -morePipes 1" failed. PS: Read file for stderr output of this job.