Sender: LSF System Subject: Job 65234: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Oct 19 17:13:07 2005 Results reported at Wed Oct 19 17:14:50 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.10.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 61.43 sec. Max Memory : 12 MB Max Swap : 30 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Wed Oct 19 17:13:18 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Oct 19 17:13:31 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_87/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Wed Oct 19 17:13:31 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_87/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Wed Oct 19 17:13:32 CDT 2005 Begin running plate --------------------------------------------------------------- Wed Oct 19 17:13:32 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9645894 makePlates : beginning loop over plObs chain; makePlates : making 5 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapT-8119.par makePlates : plateInfo struct for plate 2333 : (h4).mjd 53689 (h4).raCen 298.4421 (h4).decCen 19.07833 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 298.442 19.078 298.442 20.578 plMakePlateFromTile : mjd of obs : 53689.383681 Observed HA/dec of plate center, fiducial point (deg) : 0.000 19.099 0.001 20.598 The rotation angle of the fid. point is -0.032054 plMakePlateFromTile : beginning loop over 1677 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapT-8120.par makePlates : plateInfo struct for plate 2334 : (h4).mjd 53689 (h4).raCen 51.245 (h4).decCen 5.202 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 51.245 5.202 51.245 6.702 plMakePlateFromTile : mjd of obs : 53689.696217 Observed HA/dec of plate center, fiducial point (deg) : -0.002 5.234 -0.003 6.734 The rotation angle of the fid. point is 0.028655 plMakePlateFromTile : beginning loop over 1595 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapT-8121.par makePlates : plateInfo struct for plate 2335 : (h4).mjd 53689 (h4).raCen 48.2456 (h4).decCen 5.4778 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 48.246 5.478 48.246 6.978 plMakePlateFromTile : mjd of obs : 53689.687908 Observed HA/dec of plate center, fiducial point (deg) : -0.002 5.511 -0.003 7.011 The rotation angle of the fid. point is 0.027542 plMakePlateFromTile : beginning loop over 1582 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapT-8122.par makePlates : plateInfo struct for plate 2336 : (h4).mjd 53689 (h4).raCen 21.33 (h4).decCen 39.62 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.330 39.620 21.330 41.120 plMakePlateFromTile : mjd of obs : 53689.613364 Observed HA/dec of plate center, fiducial point (deg) : -0.002 39.652 -0.003 41.151 The rotation angle of the fid. point is 179.999506 plMakePlateFromTile : beginning loop over 1702 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapT-8123.par makePlates : plateInfo struct for plate 2337 : (h4).mjd 53689 (h4).raCen 106.237 (h4).decCen 65.801 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 106.237 65.801 106.237 67.301 plMakePlateFromTile : mjd of obs : 53689.848755 Observed HA/dec of plate center, fiducial point (deg) : -0.002 65.780 -0.008 67.279 The rotation angle of the fid. point is -179.917847 plMakePlateFromTile : beginning loop over 1670 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Oct 19 17:13:49 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 5 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapP-2333.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 471 to list of science objects plFiberPlate : adding sky number 220 to list of science objects plFiberPlate : adding sky number 437 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 58 108 2 67 81 3 33 89 4 18 106 5 12 125 6 37 93 7 50 82 8 33 100 9 61 101 10 96 139 11 81 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 845 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 584 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 558 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 336 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 331 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 154 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 100 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 32 plFiberPlate : 129 possible sky positions to use as objects from a possible 558. plFiberPlate : 89 possible sky positions to use as objects from a possible 557. plFiberPlate : 62 possible sky positions to use as objects from a possible 556. plFiberPlate : 36 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 29 possible sky positions to use as objects from a possible 553. plFiberPlate : 42 possible sky positions to use as objects from a possible 552. plFiberPlate : 49 possible sky positions to use as objects from a possible 551. plFiberPlate : 25 possible sky positions to use as objects from a possible 550. plFiberPlate : 2 possible sky positions to use as objects from a possible 549. plFiberPlate : 1 possible sky positions to use as objects from a possible 548. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 8.655 -60.855, increase box by 110 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 547. plFiberPlate : 0 possible sky positions to use as objects from a possible 546. plFiberPlate: No sky found for bundle at 17.510 -65.443, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 546. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 27.028 -59.083, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 27.028 -59.083, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 27.028 -59.083, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 27.028 -59.083, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 27.028 -59.083, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 22 possible sky positions to use as objects from a possible 543. plFiberPlate : 75 possible sky positions to use as objects from a possible 542. plFiberPlate : 71 possible sky positions to use as objects from a possible 541. plFiberPlate : 33 possible sky positions to use as objects from a possible 540. plFiberPlate : 13 possible sky positions to use as objects from a possible 539. plFiberPlate : 8 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 15 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 34 possible sky positions to use as objects from a possible 534. plFiberPlate : 59 possible sky positions to use as objects from a possible 533. plFiberPlate : 45 possible sky positions to use as objects from a possible 532. plFiberPlate : 30 possible sky positions to use as objects from a possible 531. plFiberPlate : 23 possible sky positions to use as objects from a possible 530. plFiberPlate : 18 possible sky positions to use as objects from a possible 529. plFiberPlate : 19 possible sky positions to use as objects from a possible 528. plFiberPlate : 23 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 904 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2333.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2333.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapP-2334.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 181 2 8 133 3 6 111 4 12 151 5 14 176 6 10 116 7 8 113 8 8 164 9 12 169 10 21 232 11 19 168 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 222 9 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 221 20 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 216 47 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 213 31 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 210 56 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 210 83 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 207 12 plFiberPlate : adding spectro-photo std with objId = 5065 40 4 206 4 plFiberPlate : 175 possible sky positions to use as objects from a possible 840. plFiberPlate : 132 possible sky positions to use as objects from a possible 839. plFiberPlate : 62 possible sky positions to use as objects from a possible 838. plFiberPlate : 41 possible sky positions to use as objects from a possible 837. plFiberPlate : 35 possible sky positions to use as objects from a possible 836. plFiberPlate : 53 possible sky positions to use as objects from a possible 835. plFiberPlate : 55 possible sky positions to use as objects from a possible 834. plFiberPlate : 107 possible sky positions to use as objects from a possible 833. plFiberPlate : 81 possible sky positions to use as objects from a possible 832. plFiberPlate : 68 possible sky positions to use as objects from a possible 831. plFiberPlate : 40 possible sky positions to use as objects from a possible 830. plFiberPlate : 28 possible sky positions to use as objects from a possible 829. plFiberPlate : 24 possible sky positions to use as objects from a possible 828. plFiberPlate : 32 possible sky positions to use as objects from a possible 827. plFiberPlate : 11 possible sky positions to use as objects from a possible 826. plFiberPlate : 32 possible sky positions to use as objects from a possible 825. plFiberPlate : 119 possible sky positions to use as objects from a possible 824. plFiberPlate : 85 possible sky positions to use as objects from a possible 823. plFiberPlate : 60 possible sky positions to use as objects from a possible 822. plFiberPlate : 37 possible sky positions to use as objects from a possible 821. plFiberPlate : 19 possible sky positions to use as objects from a possible 820. plFiberPlate : 41 possible sky positions to use as objects from a possible 819. plFiberPlate : 24 possible sky positions to use as objects from a possible 818. plFiberPlate : 16 possible sky positions to use as objects from a possible 817. plFiberPlate : 22 possible sky positions to use as objects from a possible 816. plFiberPlate : 41 possible sky positions to use as objects from a possible 815. plFiberPlate : 37 possible sky positions to use as objects from a possible 814. plFiberPlate : 19 possible sky positions to use as objects from a possible 813. plFiberPlate : 22 possible sky positions to use as objects from a possible 812. plFiberPlate : 16 possible sky positions to use as objects from a possible 811. plFiberPlate : 14 possible sky positions to use as objects from a possible 810. plFiberPlate : 13 possible sky positions to use as objects from a possible 809. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 703 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2333.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2334.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2334.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapP-2335.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 170 2 15 118 3 9 121 4 10 163 5 11 184 6 3 126 7 5 120 8 15 167 9 8 177 10 21 233 11 22 165 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5714 40 1 197 96 plFiberPlate : adding spectro-photo std with objId = 5714 40 1 191 29 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 195 29 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 193 15 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 190 100 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 189 88 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 188 62 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 187 11 plFiberPlate : 186 possible sky positions to use as objects from a possible 856. plFiberPlate : 136 possible sky positions to use as objects from a possible 855. plFiberPlate : 83 possible sky positions to use as objects from a possible 854. plFiberPlate : 56 possible sky positions to use as objects from a possible 853. plFiberPlate : 64 possible sky positions to use as objects from a possible 852. plFiberPlate : 46 possible sky positions to use as objects from a possible 851. plFiberPlate : 46 possible sky positions to use as objects from a possible 850. plFiberPlate : 110 possible sky positions to use as objects from a possible 849. plFiberPlate : 75 possible sky positions to use as objects from a possible 848. plFiberPlate : 53 possible sky positions to use as objects from a possible 847. plFiberPlate : 29 possible sky positions to use as objects from a possible 846. plFiberPlate : 22 possible sky positions to use as objects from a possible 845. plFiberPlate : 29 possible sky positions to use as objects from a possible 844. plFiberPlate : 21 possible sky positions to use as objects from a possible 843. plFiberPlate : 11 possible sky positions to use as objects from a possible 842. plFiberPlate : 20 possible sky positions to use as objects from a possible 841. plFiberPlate : 114 possible sky positions to use as objects from a possible 840. plFiberPlate : 80 possible sky positions to use as objects from a possible 839. plFiberPlate : 58 possible sky positions to use as objects from a possible 838. plFiberPlate : 35 possible sky positions to use as objects from a possible 837. plFiberPlate : 12 possible sky positions to use as objects from a possible 836. plFiberPlate : 20 possible sky positions to use as objects from a possible 835. plFiberPlate : 28 possible sky positions to use as objects from a possible 834. plFiberPlate : 33 possible sky positions to use as objects from a possible 833. plFiberPlate : 26 possible sky positions to use as objects from a possible 832. plFiberPlate : 78 possible sky positions to use as objects from a possible 831. plFiberPlate : 49 possible sky positions to use as objects from a possible 830. plFiberPlate : 34 possible sky positions to use as objects from a possible 829. plFiberPlate : 24 possible sky positions to use as objects from a possible 828. plFiberPlate : 22 possible sky positions to use as objects from a possible 827. plFiberPlate : 24 possible sky positions to use as objects from a possible 826. plFiberPlate : 12 possible sky positions to use as objects from a possible 825. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 707 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2334.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2335.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2335.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapP-2336.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 46 122 2 40 116 3 24 107 4 18 122 5 20 121 6 6 119 7 36 116 8 37 115 9 29 143 10 46 191 11 43 131 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 211 279 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 210 261 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 207 54 plFiberPlate : adding spectro-photo std with objId = 4829 40 2 207 142 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 201 125 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 201 250 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 197 206 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 197 191 plFiberPlate : 152 possible sky positions to use as objects from a possible 671. plFiberPlate : 113 possible sky positions to use as objects from a possible 670. plFiberPlate : 65 possible sky positions to use as objects from a possible 669. plFiberPlate : 57 possible sky positions to use as objects from a possible 668. plFiberPlate : 30 possible sky positions to use as objects from a possible 667. plFiberPlate : 17 possible sky positions to use as objects from a possible 666. plFiberPlate : 56 possible sky positions to use as objects from a possible 665. plFiberPlate : 94 possible sky positions to use as objects from a possible 664. plFiberPlate : 80 possible sky positions to use as objects from a possible 663. plFiberPlate : 65 possible sky positions to use as objects from a possible 662. plFiberPlate : 46 possible sky positions to use as objects from a possible 661. plFiberPlate : 24 possible sky positions to use as objects from a possible 660. plFiberPlate : 12 possible sky positions to use as objects from a possible 659. plFiberPlate : 20 possible sky positions to use as objects from a possible 658. plFiberPlate : 12 possible sky positions to use as objects from a possible 657. plFiberPlate : 33 possible sky positions to use as objects from a possible 656. plFiberPlate : 81 possible sky positions to use as objects from a possible 655. plFiberPlate : 57 possible sky positions to use as objects from a possible 654. plFiberPlate : 45 possible sky positions to use as objects from a possible 653. plFiberPlate : 41 possible sky positions to use as objects from a possible 652. plFiberPlate : 22 possible sky positions to use as objects from a possible 651. plFiberPlate : 23 possible sky positions to use as objects from a possible 650. plFiberPlate : 27 possible sky positions to use as objects from a possible 649. plFiberPlate : 16 possible sky positions to use as objects from a possible 648. plFiberPlate : 15 possible sky positions to use as objects from a possible 647. plFiberPlate : 47 possible sky positions to use as objects from a possible 646. plFiberPlate : 39 possible sky positions to use as objects from a possible 645. plFiberPlate : 25 possible sky positions to use as objects from a possible 644. plFiberPlate : 31 possible sky positions to use as objects from a possible 643. plFiberPlate : 15 possible sky positions to use as objects from a possible 642. plFiberPlate : 15 possible sky positions to use as objects from a possible 641. plFiberPlate : 9 possible sky positions to use as objects from a possible 640. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 775 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2335.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2336.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2336.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.3/plPlugMapP-2337.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 164 2 29 115 3 24 109 4 19 154 5 5 182 6 5 122 7 8 121 8 8 164 9 5 169 10 33 219 11 31 158 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4887 40 6 218 185 plFiberPlate : adding spectro-photo std with objId = 4887 40 2 217 202 plFiberPlate : adding spectro-photo std with objId = 4887 40 6 216 233 plFiberPlate : adding spectro-photo std with objId = 4887 40 5 215 53 plFiberPlate : adding spectro-photo std with objId = 4887 40 4 215 205 plFiberPlate : adding spectro-photo std with objId = 4887 40 2 215 208 plFiberPlate : adding spectro-photo std with objId = 4887 40 3 214 313 plFiberPlate : adding spectro-photo std with objId = 4887 40 3 214 139 plFiberPlate : 166 possible sky positions to use as objects from a possible 833. plFiberPlate : 131 possible sky positions to use as objects from a possible 832. plFiberPlate : 91 possible sky positions to use as objects from a possible 831. plFiberPlate : 46 possible sky positions to use as objects from a possible 830. plFiberPlate : 41 possible sky positions to use as objects from a possible 829. plFiberPlate : 30 possible sky positions to use as objects from a possible 828. plFiberPlate : 86 possible sky positions to use as objects from a possible 827. plFiberPlate : 127 possible sky positions to use as objects from a possible 826. plFiberPlate : 107 possible sky positions to use as objects from a possible 825. plFiberPlate : 79 possible sky positions to use as objects from a possible 824. plFiberPlate : 49 possible sky positions to use as objects from a possible 823. plFiberPlate : 26 possible sky positions to use as objects from a possible 822. plFiberPlate : 28 possible sky positions to use as objects from a possible 821. plFiberPlate : 19 possible sky positions to use as objects from a possible 820. plFiberPlate : 37 possible sky positions to use as objects from a possible 819. plFiberPlate : 32 possible sky positions to use as objects from a possible 818. plFiberPlate : 108 possible sky positions to use as objects from a possible 817. plFiberPlate : 106 possible sky positions to use as objects from a possible 816. plFiberPlate : 89 possible sky positions to use as objects from a possible 815. plFiberPlate : 51 possible sky positions to use as objects from a possible 814. plFiberPlate : 28 possible sky positions to use as objects from a possible 813. plFiberPlate : 36 possible sky positions to use as objects from a possible 812. plFiberPlate : 27 possible sky positions to use as objects from a possible 811. plFiberPlate : 19 possible sky positions to use as objects from a possible 810. plFiberPlate : 27 possible sky positions to use as objects from a possible 809. plFiberPlate : 81 possible sky positions to use as objects from a possible 808. plFiberPlate : 60 possible sky positions to use as objects from a possible 807. plFiberPlate : 37 possible sky positions to use as objects from a possible 806. plFiberPlate : 18 possible sky positions to use as objects from a possible 805. plFiberPlate : 22 possible sky positions to use as objects from a possible 804. plFiberPlate : 17 possible sky positions to use as objects from a possible 803. plFiberPlate : 37 possible sky positions to use as objects from a possible 802. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 743 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2336.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2337.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.3/plOverlay-2337.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Oct 19 17:14:03 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 5 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 242 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2333.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3075,-7.1174) and (11.47,-4.84) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2333.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2333.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 41 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2334.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2334.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2334.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 45 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2335.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2335.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2335.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 113 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2336.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2336.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2336.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 81 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2337.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2337.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.3/plFanuc-2337.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Oct 19 17:14:21 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa72866c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 5 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2333 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 904 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2334 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 703 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2335 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 707 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2336 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 775 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2337 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 743 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Oct 19 17:14:29 CDT 2005 Begin running "plateEnder dr2005.10.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.10.3 -morePipes 1" failed. PS: Read file for stderr output of this job.