Sender: LSF System Subject: Job 167237: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sun Jul 22 15:57:11 2007 Results reported at Sun Jul 22 16:02:22 2007 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash ## # WARNING: THIS SCRIPT WAS AUTOMATICALLY GENERATED on Sun Jul 22 15:56:59 CDT 2007 # dp version: v19_59 DP_DIR: /sdss/ups/prd/dp/v19_59/NULL # on host sdssdp0 user: hlin ## . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2007.07.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 244.13 sec. Max Memory : 13 MB Max Swap : 30 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Sun Jul 22 15:57:23 CDT 2007 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sun Jul 22 15:57:46 CDT 2007 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/lsf/v5_1/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_6g/Linux-2-4-2-3-2:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/ups/v4_7_3/Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin/:/data/des03.a/data/hlin/gemini/gmmps-V-0-22-REL/gmmps/bin:/data/des03.a/data/hlin/gemini/skycat-3.0/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_7/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v6_3/Linux/idl_6.3/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/idlutils/v5_2_0/Linux/bin:/sdss/ups/prd/idlspec2d/v5_3_2a/Linux/bin:/sdss/ups/prd/spectro/v5_10_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v19_59/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Sun Jul 22 15:57:46 CDT 2007 ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DAS_ADMIN_DIR=/sdss/ups/prd/das_admin/v1_5_0/NULL DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v19_59/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_1/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_6g/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v5_3_2a/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v5_2_0/Linux IDL_DIR=/sdss/ups/prd/idl/v6_3/Linux/idl_6.3 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v6_3/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_7/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_10_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/sdss/ups/prd/ups/v4_7_3/Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Sun Jul 22 15:57:47 CDT 2007 Begin running plate --------------------------------------------------------------- Sun Jul 22 15:57:47 CDT 2007 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_59/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_59/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0xab8597c makePlates : beginning loop over plObs chain; makePlates : making 21 plates makePlates : making a plate from ./plPlugMapT-8329.par makePlates : plateInfo struct for plate 2796 : (h2).mjd 54344 (h2).raCen 253.0975 (h2).decCen 12.4854 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.098 12.485 253.098 13.985 plMakePlateFromTile : mjd of obs : 54344.464242 Observed HA/dec of plate center, fiducial point (deg) : -0.002 12.480 -0.001 13.979 The rotation angle of the fid. point is -0.035832 plMakePlateFromTile : beginning loop over 1727 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8330.par makePlates : plateInfo struct for plate 2797 : (h2).mjd 54344 (h2).raCen 262.52215 (h2).decCen 8.111555 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 262.522 8.112 262.522 9.612 plMakePlateFromTile : mjd of obs : 54344.490360 Observed HA/dec of plate center, fiducial point (deg) : -0.002 8.114 -0.001 9.613 The rotation angle of the fid. point is -0.038094 plMakePlateFromTile : beginning loop over 1665 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8331.par makePlates : plateInfo struct for plate 2798 : (h2).mjd 54344 (h2).raCen 279.34 (h2).decCen 41.3041 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 279.340 41.304 279.340 42.804 plMakePlateFromTile : mjd of obs : 54344.453733 Observed HA/dec of plate center, fiducial point (deg) : -30.002 41.312 -30.000 42.812 The rotation angle of the fid. point is 99.919187 plMakePlateFromTile : beginning loop over 1667 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8332.par makePlates : plateInfo struct for plate 2799 : (h2).mjd 54344 (h2).raCen 263.441 (h2).decCen 44.1526 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 263.441 44.153 263.441 45.653 plMakePlateFromTile : mjd of obs : 54344.492809 Observed HA/dec of plate center, fiducial point (deg) : -0.002 44.147 -0.000 45.647 The rotation angle of the fid. point is 179.931591 plMakePlateFromTile : beginning loop over 1638 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8333.par makePlates : plateInfo struct for plate 2800 : (h2).mjd 54344 (h2).raCen 290.56796 (h2).decCen 37.6826 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 290.568 37.683 290.568 39.183 plMakePlateFromTile : mjd of obs : 54344.484857 Observed HA/dec of plate center, fiducial point (deg) : -30.002 37.699 -30.000 39.199 The rotation angle of the fid. point is 92.241203 plMakePlateFromTile : beginning loop over 2639 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8334.par makePlates : plateInfo struct for plate 2801 : (h2).mjd 54344 (h2).raCen 1.24947 (h2).decCen 24.9529 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 1.249 24.953 1.249 26.453 plMakePlateFromTile : mjd of obs : 54343.766610 Observed HA/dec of plate center, fiducial point (deg) : -0.002 25.000 -0.002 26.499 The rotation angle of the fid. point is 0.015813 plMakePlateFromTile : beginning loop over 1627 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8335.par makePlates : plateInfo struct for plate 2802 : (h2).mjd 54344 (h2).raCen 278.037 (h2).decCen 78.5091 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 278.037 78.509 278.037 80.009 plMakePlateFromTile : mjd of obs : 54344.449553 Observed HA/dec of plate center, fiducial point (deg) : -30.001 78.503 -29.961 80.002 The rotation angle of the fid. point is 144.967065 plMakePlateFromTile : beginning loop over 1801 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8336.par makePlates : plateInfo struct for plate 2803 : (h2).mjd 54344 (h2).raCen 0.64121451 (h2).decCen 28.1415 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 0.641 28.142 0.641 29.642 plMakePlateFromTile : mjd of obs : 54343.764925 Observed HA/dec of plate center, fiducial point (deg) : -0.002 28.187 -0.002 29.687 The rotation angle of the fid. point is 0.025976 plMakePlateFromTile : beginning loop over 1407 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8337.par makePlates : plateInfo struct for plate 2804 : (h2).mjd 54344 (h2).raCen 17.8578 (h2).decCen 15.597 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 17.858 15.597 17.858 17.097 plMakePlateFromTile : mjd of obs : 54343.812626 Observed HA/dec of plate center, fiducial point (deg) : -0.002 15.645 -0.003 17.145 The rotation angle of the fid. point is 0.019592 plMakePlateFromTile : beginning loop over 1624 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8338.par makePlates : plateInfo struct for plate 2805 : (h2).mjd 54344 (h2).raCen 64.84711 (h2).decCen 6.5575 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 64.847 6.558 64.847 8.057 plMakePlateFromTile : mjd of obs : 54343.942788 Observed HA/dec of plate center, fiducial point (deg) : -0.002 6.588 -0.003 8.087 The rotation angle of the fid. point is 0.043242 plMakePlateFromTile : beginning loop over 1786 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8339.par makePlates : plateInfo struct for plate 2806 : (h2).mjd 54344 (h2).raCen 122.7728 (h2).decCen -7.3945 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.773 -7.394 122.773 -5.894 plMakePlateFromTile : mjd of obs : 54344.103215 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -7.400 -0.003 -5.900 The rotation angle of the fid. point is 0.041792 plMakePlateFromTile : beginning loop over 2055 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8340.par makePlates : plateInfo struct for plate 2807 : (h2).mjd 54344 (h2).raCen 127.959576 (h2).decCen -4.331053 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.960 -4.331 127.960 -2.831 plMakePlateFromTile : mjd of obs : 54344.117589 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -4.341 -0.003 -2.842 The rotation angle of the fid. point is 0.039497 plMakePlateFromTile : beginning loop over 1811 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8341.par makePlates : plateInfo struct for plate 2808 : (h2).mjd 54344 (h2).raCen 255.752 (h2).decCen 28.393 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 255.752 28.393 255.752 29.893 plMakePlateFromTile : mjd of obs : 54344.471559 Observed HA/dec of plate center, fiducial point (deg) : -0.002 28.386 -0.001 29.885 The rotation angle of the fid. point is -0.020110 plMakePlateFromTile : beginning loop over 1841 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8342.par makePlates : plateInfo struct for plate 2809 : (h2).mjd 54344 (h2).raCen 261.181 (h2).decCen 27.01436 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 261.181 27.014 261.181 28.514 plMakePlateFromTile : mjd of obs : 54344.486602 Observed HA/dec of plate center, fiducial point (deg) : -0.002 27.011 -0.001 28.511 The rotation angle of the fid. point is -0.026779 plMakePlateFromTile : beginning loop over 1905 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8343.par makePlates : plateInfo struct for plate 2810 : (h2).mjd 54344 (h2).raCen 266.4694 (h2).decCen 25.43275 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 266.469 25.433 266.469 26.933 plMakePlateFromTile : mjd of obs : 54344.501256 Observed HA/dec of plate center, fiducial point (deg) : -0.002 25.434 -0.001 26.933 The rotation angle of the fid. point is -0.031011 plMakePlateFromTile : beginning loop over 2049 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8344.par makePlates : plateInfo struct for plate 2811 : (h2).mjd 54344 (h2).raCen 271.6128 (h2).decCen 23.667 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 271.613 23.667 271.613 25.167 plMakePlateFromTile : mjd of obs : 54344.432380 Observed HA/dec of plate center, fiducial point (deg) : -30.002 23.673 -30.001 25.173 The rotation angle of the fid. point is 64.122026 plMakePlateFromTile : beginning loop over 2280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8345.par makePlates : plateInfo struct for plate 2812 : (h2).mjd 54344 (h2).raCen 283.3842 (h2).decCen 18.79221 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 283.384 18.792 283.384 20.292 plMakePlateFromTile : mjd of obs : 54344.465005 Observed HA/dec of plate center, fiducial point (deg) : -30.002 18.809 -30.001 20.308 The rotation angle of the fid. point is 56.503564 plMakePlateFromTile : beginning loop over 3881 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8346.par makePlates : plateInfo struct for plate 2813 : (h2).mjd 54344 (h2).raCen 298.01408 (h2).decCen 11.25732 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 298.014 11.257 298.014 12.757 plMakePlateFromTile : mjd of obs : 54344.505553 Observed HA/dec of plate center, fiducial point (deg) : -30.002 11.286 -30.001 12.786 The rotation angle of the fid. point is 47.225607 plMakePlateFromTile : beginning loop over 3772 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8347.par makePlates : plateInfo struct for plate 2814 : (h2).mjd 54344 (h2).raCen 304.13838 (h2).decCen 7.71816 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 304.138 7.718 304.138 9.218 plMakePlateFromTile : mjd of obs : 54344.522526 Observed HA/dec of plate center, fiducial point (deg) : -30.002 7.752 -30.001 9.252 The rotation angle of the fid. point is 43.775928 plMakePlateFromTile : beginning loop over 2870 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8348.par makePlates : plateInfo struct for plate 2815 : (h2).mjd 54344 (h2).raCen 312.7209 (h2).decCen 2.5239 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 312.721 2.524 312.721 4.024 plMakePlateFromTile : mjd of obs : 54344.546311 Observed HA/dec of plate center, fiducial point (deg) : -30.002 2.565 -30.002 4.064 The rotation angle of the fid. point is 39.566744 plMakePlateFromTile : beginning loop over 2110 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8349.par makePlates : plateInfo struct for plate 2816 : (h2).mjd 54344 (h2).raCen 25.2835 (h2).decCen -9.3913 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 5 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 25.284 -9.391 25.284 -7.891 plMakePlateFromTile : mjd of obs : 54343.833179 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -9.333 -0.003 -7.834 The rotation angle of the fid. point is 0.019032 plMakePlateFromTile : beginning loop over 1565 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sun Jul 22 15:58:56 CDT 2007 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_59/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_59/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 21 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2796.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 505 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 73 125 2 59 95 3 49 78 4 76 110 5 52 146 6 32 100 7 30 79 8 48 99 9 51 133 10 113 149 11 72 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5378 40 2 43 33 plFiberPlate : adding spectro-photo std with objId = 5378 40 1 37 44 plFiberPlate : adding spectro-photo std with objId = 5378 40 2 34 203 plFiberPlate : adding spectro-photo std with objId = 5378 40 1 34 356 plFiberPlate : adding spectro-photo std with objId = 5378 40 6 33 164 plFiberPlate : adding spectro-photo std with objId = 5378 40 4 33 89 plFiberPlate : adding spectro-photo std with objId = 5378 40 3 33 331 plFiberPlate : adding spectro-photo std with objId = 5378 40 3 32 115 plFiberPlate : 111 possible sky positions to use as objects from a possible 601. plFiberPlate : 81 possible sky positions to use as objects from a possible 600. plFiberPlate : 37 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 22 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 43 possible sky positions to use as objects from a possible 595. plFiberPlate : 83 possible sky positions to use as objects from a possible 594. plFiberPlate : 73 possible sky positions to use as objects from a possible 593. plFiberPlate : 49 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 102 possible sky positions to use as objects from a possible 585. plFiberPlate : 81 possible sky positions to use as objects from a possible 584. plFiberPlate : 47 possible sky positions to use as objects from a possible 583. plFiberPlate : 23 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 23 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 52 possible sky positions to use as objects from a possible 576. plFiberPlate : 53 possible sky positions to use as objects from a possible 575. plFiberPlate : 37 possible sky positions to use as objects from a possible 574. plFiberPlate : 20 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 10 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 747 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2796.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2796.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2797.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 132 18 2 105 6 3 85 11 4 124 14 5 127 24 6 74 16 7 65 12 8 104 19 9 112 17 10 204 22 11 136 9 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6105 40 1 62 184 plFiberPlate : adding spectro-photo std with objId = 6105 40 1 61 571 plFiberPlate : adding spectro-photo std with objId = 6105 40 1 60 429 plFiberPlate : adding spectro-photo std with objId = 6105 40 5 59 315 plFiberPlate : adding spectro-photo std with objId = 6105 40 3 59 446 plFiberPlate : adding spectro-photo std with objId = 6105 40 2 59 644 plFiberPlate : adding spectro-photo std with objId = 6105 40 5 57 405 plFiberPlate : adding spectro-photo std with objId = 6105 40 3 57 354 plFiberPlate : 21 possible sky positions to use as objects from a possible 89. plFiberPlate : 16 possible sky positions to use as objects from a possible 88. plFiberPlate : 8 possible sky positions to use as objects from a possible 87. plFiberPlate : 0 possible sky positions to use as objects from a possible 86. plFiberPlate: No sky found for bundle at 12.116 -255.264, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 86. plFiberPlate : 2 possible sky positions to use as objects from a possible 85. plFiberPlate : 1 possible sky positions to use as objects from a possible 84. plFiberPlate : 9 possible sky positions to use as objects from a possible 83. plFiberPlate : 18 possible sky positions to use as objects from a possible 82. plFiberPlate : 15 possible sky positions to use as objects from a possible 81. plFiberPlate : 12 possible sky positions to use as objects from a possible 80. plFiberPlate : 11 possible sky positions to use as objects from a possible 79. plFiberPlate : 3 possible sky positions to use as objects from a possible 78. plFiberPlate : 1 possible sky positions to use as objects from a possible 77. plFiberPlate : 0 possible sky positions to use as objects from a possible 76. plFiberPlate: No sky found for bundle at 152.066 -78.516, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 76. plFiberPlate : 6 possible sky positions to use as objects from a possible 75. plFiberPlate : 1 possible sky positions to use as objects from a possible 74. plFiberPlate : 18 possible sky positions to use as objects from a possible 73. plFiberPlate : 13 possible sky positions to use as objects from a possible 72. plFiberPlate : 12 possible sky positions to use as objects from a possible 71. plFiberPlate : 7 possible sky positions to use as objects from a possible 70. plFiberPlate : 4 possible sky positions to use as objects from a possible 69. plFiberPlate : 1 possible sky positions to use as objects from a possible 68. plFiberPlate : 3 possible sky positions to use as objects from a possible 67. plFiberPlate : 5 possible sky positions to use as objects from a possible 66. plFiberPlate : 3 possible sky positions to use as objects from a possible 65. plFiberPlate : 10 possible sky positions to use as objects from a possible 64. plFiberPlate : 3 possible sky positions to use as objects from a possible 63. plFiberPlate : 1 possible sky positions to use as objects from a possible 62. plFiberPlate : 2 possible sky positions to use as objects from a possible 61. plFiberPlate : 2 possible sky positions to use as objects from a possible 60. plFiberPlate : 5 possible sky positions to use as objects from a possible 59. plFiberPlate : 0 possible sky positions to use as objects from a possible 58. plFiberPlate: No sky found for bundle at 219.714 163.072, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 58. plFiberPlate: No sky found for bundle at 219.714 163.072, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 58. plFiberPlate: No sky found for bundle at 219.714 163.072, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 58. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 797 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2796.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2797.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2797.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2798.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 103 62 2 93 33 3 74 25 4 105 40 5 50 69 6 28 50 7 50 38 8 58 46 9 48 64 10 146 56 11 97 54 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5403 40 1 125 171 plFiberPlate : adding spectro-photo std with objId = 5403 40 2 124 302 plFiberPlate : adding spectro-photo std with objId = 5403 40 2 124 64 plFiberPlate : adding spectro-photo std with objId = 5403 40 1 124 177 plFiberPlate : adding spectro-photo std with objId = 5403 40 5 123 732 plFiberPlate : adding spectro-photo std with objId = 5403 40 4 122 67 plFiberPlate : adding spectro-photo std with objId = 5403 40 5 121 621 plFiberPlate : adding spectro-photo std with objId = 5403 40 4 121 258 plFiberPlate : 34 possible sky positions to use as objects from a possible 269. plFiberPlate : 27 possible sky positions to use as objects from a possible 268. plFiberPlate : 9 possible sky positions to use as objects from a possible 267. plFiberPlate : 15 possible sky positions to use as objects from a possible 266. plFiberPlate : 15 possible sky positions to use as objects from a possible 265. plFiberPlate : 18 possible sky positions to use as objects from a possible 264. plFiberPlate : 16 possible sky positions to use as objects from a possible 263. plFiberPlate : 23 possible sky positions to use as objects from a possible 262. plFiberPlate : 20 possible sky positions to use as objects from a possible 261. plFiberPlate : 8 possible sky positions to use as objects from a possible 260. plFiberPlate : 4 possible sky positions to use as objects from a possible 259. plFiberPlate : 5 possible sky positions to use as objects from a possible 258. plFiberPlate : 8 possible sky positions to use as objects from a possible 257. plFiberPlate : 10 possible sky positions to use as objects from a possible 256. plFiberPlate : 16 possible sky positions to use as objects from a possible 255. plFiberPlate : 6 possible sky positions to use as objects from a possible 254. plFiberPlate : 43 possible sky positions to use as objects from a possible 253. plFiberPlate : 40 possible sky positions to use as objects from a possible 252. plFiberPlate : 32 possible sky positions to use as objects from a possible 251. plFiberPlate : 18 possible sky positions to use as objects from a possible 250. plFiberPlate : 8 possible sky positions to use as objects from a possible 249. plFiberPlate : 6 possible sky positions to use as objects from a possible 248. plFiberPlate : 11 possible sky positions to use as objects from a possible 247. plFiberPlate : 11 possible sky positions to use as objects from a possible 246. plFiberPlate : 3 possible sky positions to use as objects from a possible 245. plFiberPlate : 27 possible sky positions to use as objects from a possible 244. plFiberPlate : 20 possible sky positions to use as objects from a possible 243. plFiberPlate : 18 possible sky positions to use as objects from a possible 242. plFiberPlate : 6 possible sky positions to use as objects from a possible 241. plFiberPlate : 9 possible sky positions to use as objects from a possible 240. plFiberPlate : 4 possible sky positions to use as objects from a possible 239. plFiberPlate : 6 possible sky positions to use as objects from a possible 238. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 830 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2797.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2798.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2798.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2799.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 44 148 2 44 105 3 32 84 4 36 123 5 8 169 6 7 111 7 10 95 8 8 140 9 6 158 10 77 185 11 57 141 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5403 40 6 51 92 plFiberPlate : adding spectro-photo std with objId = 5403 40 1 48 287 plFiberPlate : adding spectro-photo std with objId = 5403 40 1 47 218 plFiberPlate : adding spectro-photo std with objId = 5403 40 6 46 137 plFiberPlate : adding spectro-photo std with objId = 5403 40 5 43 66 plFiberPlate : adding spectro-photo std with objId = 5403 40 4 43 43 plFiberPlate : adding spectro-photo std with objId = 5403 40 2 43 347 plFiberPlate : adding spectro-photo std with objId = 5403 40 3 42 309 plFiberPlate : 124 possible sky positions to use as objects from a possible 718. plFiberPlate : 77 possible sky positions to use as objects from a possible 717. plFiberPlate : 46 possible sky positions to use as objects from a possible 716. plFiberPlate : 28 possible sky positions to use as objects from a possible 715. plFiberPlate : 43 possible sky positions to use as objects from a possible 714. plFiberPlate : 33 possible sky positions to use as objects from a possible 713. plFiberPlate : 49 possible sky positions to use as objects from a possible 712. plFiberPlate : 87 possible sky positions to use as objects from a possible 711. plFiberPlate : 68 possible sky positions to use as objects from a possible 710. plFiberPlate : 51 possible sky positions to use as objects from a possible 709. plFiberPlate : 34 possible sky positions to use as objects from a possible 708. plFiberPlate : 25 possible sky positions to use as objects from a possible 707. plFiberPlate : 21 possible sky positions to use as objects from a possible 706. plFiberPlate : 14 possible sky positions to use as objects from a possible 705. plFiberPlate : 16 possible sky positions to use as objects from a possible 704. plFiberPlate : 24 possible sky positions to use as objects from a possible 703. plFiberPlate : 110 possible sky positions to use as objects from a possible 702. plFiberPlate : 71 possible sky positions to use as objects from a possible 701. plFiberPlate : 51 possible sky positions to use as objects from a possible 700. plFiberPlate : 19 possible sky positions to use as objects from a possible 699. plFiberPlate : 26 possible sky positions to use as objects from a possible 698. plFiberPlate : 21 possible sky positions to use as objects from a possible 697. plFiberPlate : 40 possible sky positions to use as objects from a possible 696. plFiberPlate : 9 possible sky positions to use as objects from a possible 695. plFiberPlate : 26 possible sky positions to use as objects from a possible 694. plFiberPlate : 58 possible sky positions to use as objects from a possible 693. plFiberPlate : 66 possible sky positions to use as objects from a possible 692. plFiberPlate : 28 possible sky positions to use as objects from a possible 691. plFiberPlate : 17 possible sky positions to use as objects from a possible 690. plFiberPlate : 22 possible sky positions to use as objects from a possible 689. plFiberPlate : 16 possible sky positions to use as objects from a possible 688. plFiberPlate : 11 possible sky positions to use as objects from a possible 687. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 762 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2798.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2799.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2799.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2800.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 69 87 2 82 68 3 96 56 4 144 56 5 169 54 6 112 53 7 98 60 8 99 62 9 141 61 10 220 80 11 118 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5403 40 1 187 147 plFiberPlate : adding spectro-photo std with objId = 5403 40 1 186 1439 plFiberPlate : adding spectro-photo std with objId = 5403 40 2 185 1477 plFiberPlate : adding spectro-photo std with objId = 5403 40 2 185 719 plFiberPlate : adding spectro-photo std with objId = 5403 40 3 184 1119 plFiberPlate : adding spectro-photo std with objId = 5403 40 3 184 1010 plFiberPlate : adding spectro-photo std with objId = 5403 40 4 183 902 plFiberPlate : adding spectro-photo std with objId = 5403 40 4 183 875 plFiberPlate : 45 possible sky positions to use as objects from a possible 341. plFiberPlate : 38 possible sky positions to use as objects from a possible 340. plFiberPlate : 22 possible sky positions to use as objects from a possible 339. plFiberPlate : 13 possible sky positions to use as objects from a possible 338. plFiberPlate : 11 possible sky positions to use as objects from a possible 337. plFiberPlate : 16 possible sky positions to use as objects from a possible 336. plFiberPlate : 8 possible sky positions to use as objects from a possible 335. plFiberPlate : 30 possible sky positions to use as objects from a possible 334. plFiberPlate : 31 possible sky positions to use as objects from a possible 333. plFiberPlate : 15 possible sky positions to use as objects from a possible 332. plFiberPlate : 7 possible sky positions to use as objects from a possible 331. plFiberPlate : 5 possible sky positions to use as objects from a possible 330. plFiberPlate : 3 possible sky positions to use as objects from a possible 329. plFiberPlate : 7 possible sky positions to use as objects from a possible 328. plFiberPlate : 6 possible sky positions to use as objects from a possible 327. plFiberPlate : 8 possible sky positions to use as objects from a possible 326. plFiberPlate : 29 possible sky positions to use as objects from a possible 325. plFiberPlate : 25 possible sky positions to use as objects from a possible 324. plFiberPlate : 10 possible sky positions to use as objects from a possible 323. plFiberPlate : 5 possible sky positions to use as objects from a possible 322. plFiberPlate : 7 possible sky positions to use as objects from a possible 321. plFiberPlate : 4 possible sky positions to use as objects from a possible 320. plFiberPlate : 2 possible sky positions to use as objects from a possible 319. plFiberPlate : 8 possible sky positions to use as objects from a possible 318. plFiberPlate : 10 possible sky positions to use as objects from a possible 317. plFiberPlate : 27 possible sky positions to use as objects from a possible 316. plFiberPlate : 21 possible sky positions to use as objects from a possible 315. plFiberPlate : 13 possible sky positions to use as objects from a possible 314. plFiberPlate : 8 possible sky positions to use as objects from a possible 313. plFiberPlate : 8 possible sky positions to use as objects from a possible 312. plFiberPlate : 4 possible sky positions to use as objects from a possible 311. plFiberPlate : 15 possible sky positions to use as objects from a possible 310. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 920 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2799.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2800.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2800.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2801.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 301 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 181 2 21 126 3 27 110 4 38 119 5 22 152 6 18 123 7 15 111 8 19 143 9 22 174 10 50 224 11 35 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 369 6 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 369 115 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 368 84 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 368 10 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 367 111 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 367 122 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 366 19 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 366 50 plFiberPlate : 157 possible sky positions to use as objects from a possible 764. plFiberPlate : 120 possible sky positions to use as objects from a possible 763. plFiberPlate : 67 possible sky positions to use as objects from a possible 762. plFiberPlate : 35 possible sky positions to use as objects from a possible 761. plFiberPlate : 83 possible sky positions to use as objects from a possible 760. plFiberPlate : 41 possible sky positions to use as objects from a possible 759. plFiberPlate : 54 possible sky positions to use as objects from a possible 758. plFiberPlate : 87 possible sky positions to use as objects from a possible 757. plFiberPlate : 81 possible sky positions to use as objects from a possible 756. plFiberPlate : 80 possible sky positions to use as objects from a possible 755. plFiberPlate : 60 possible sky positions to use as objects from a possible 754. plFiberPlate : 20 possible sky positions to use as objects from a possible 753. plFiberPlate : 29 possible sky positions to use as objects from a possible 752. plFiberPlate : 34 possible sky positions to use as objects from a possible 751. plFiberPlate : 20 possible sky positions to use as objects from a possible 750. plFiberPlate : 35 possible sky positions to use as objects from a possible 749. plFiberPlate : 94 possible sky positions to use as objects from a possible 748. plFiberPlate : 72 possible sky positions to use as objects from a possible 747. plFiberPlate : 45 possible sky positions to use as objects from a possible 746. plFiberPlate : 31 possible sky positions to use as objects from a possible 745. plFiberPlate : 23 possible sky positions to use as objects from a possible 744. plFiberPlate : 30 possible sky positions to use as objects from a possible 743. plFiberPlate : 26 possible sky positions to use as objects from a possible 742. plFiberPlate : 11 possible sky positions to use as objects from a possible 741. plFiberPlate : 17 possible sky positions to use as objects from a possible 740. plFiberPlate : 60 possible sky positions to use as objects from a possible 739. plFiberPlate : 51 possible sky positions to use as objects from a possible 738. plFiberPlate : 35 possible sky positions to use as objects from a possible 737. plFiberPlate : 33 possible sky positions to use as objects from a possible 736. plFiberPlate : 13 possible sky positions to use as objects from a possible 735. plFiberPlate : 13 possible sky positions to use as objects from a possible 734. plFiberPlate : 25 possible sky positions to use as objects from a possible 733. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 729 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2800.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2801.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2801.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2802.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 591 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 81 152 2 49 99 3 39 98 4 55 153 5 53 172 6 39 109 7 40 105 8 64 135 9 59 156 10 79 202 11 62 143 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4144 40 3 27 157 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 26 84 plFiberPlate : adding spectro-photo std with objId = 4144 40 6 24 117 plFiberPlate : adding spectro-photo std with objId = 4144 40 6 22 100 plFiberPlate : adding spectro-photo std with objId = 4144 40 3 21 11 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 20 74 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 19 127 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 18 195 plFiberPlate : 171 possible sky positions to use as objects from a possible 754. plFiberPlate : 134 possible sky positions to use as objects from a possible 753. plFiberPlate : 67 possible sky positions to use as objects from a possible 752. plFiberPlate : 36 possible sky positions to use as objects from a possible 751. plFiberPlate : 34 possible sky positions to use as objects from a possible 750. plFiberPlate : 39 possible sky positions to use as objects from a possible 749. plFiberPlate : 50 possible sky positions to use as objects from a possible 748. plFiberPlate : 97 possible sky positions to use as objects from a possible 747. plFiberPlate : 83 possible sky positions to use as objects from a possible 746. plFiberPlate : 36 possible sky positions to use as objects from a possible 745. plFiberPlate : 23 possible sky positions to use as objects from a possible 744. plFiberPlate : 20 possible sky positions to use as objects from a possible 743. plFiberPlate : 14 possible sky positions to use as objects from a possible 742. plFiberPlate : 18 possible sky positions to use as objects from a possible 741. plFiberPlate : 19 possible sky positions to use as objects from a possible 740. plFiberPlate : 14 possible sky positions to use as objects from a possible 739. plFiberPlate : 101 possible sky positions to use as objects from a possible 738. plFiberPlate : 84 possible sky positions to use as objects from a possible 737. plFiberPlate : 60 possible sky positions to use as objects from a possible 736. plFiberPlate : 39 possible sky positions to use as objects from a possible 735. plFiberPlate : 27 possible sky positions to use as objects from a possible 734. plFiberPlate : 23 possible sky positions to use as objects from a possible 733. plFiberPlate : 24 possible sky positions to use as objects from a possible 732. plFiberPlate : 13 possible sky positions to use as objects from a possible 731. plFiberPlate : 19 possible sky positions to use as objects from a possible 730. plFiberPlate : 62 possible sky positions to use as objects from a possible 729. plFiberPlate : 49 possible sky positions to use as objects from a possible 728. plFiberPlate : 28 possible sky positions to use as objects from a possible 727. plFiberPlate : 16 possible sky positions to use as objects from a possible 726. plFiberPlate : 20 possible sky positions to use as objects from a possible 725. plFiberPlate : 17 possible sky positions to use as objects from a possible 724. plFiberPlate : 26 possible sky positions to use as objects from a possible 723. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 765 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2801.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2802.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2802.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2803.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 190 2 20 146 3 21 81 4 10 34 5 15 43 6 17 86 7 15 120 8 18 130 9 24 164 10 41 207 11 21 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4135 40 3 289 159 plFiberPlate : adding spectro-photo std with objId = 4135 40 3 288 176 plFiberPlate : adding spectro-photo std with objId = 4135 40 4 287 108 plFiberPlate : adding spectro-photo std with objId = 4135 40 5 285 52 plFiberPlate : adding spectro-photo std with objId = 4135 40 4 279 248 plFiberPlate : adding spectro-photo std with objId = 4135 40 3 279 86 plFiberPlate : adding spectro-photo std with objId = 4135 40 4 277 184 plFiberPlate : adding spectro-photo std with objId = 4135 40 6 276 100 plFiberPlate : 86 possible sky positions to use as objects from a possible 614. plFiberPlate : 88 possible sky positions to use as objects from a possible 613. plFiberPlate : 63 possible sky positions to use as objects from a possible 612. plFiberPlate : 52 possible sky positions to use as objects from a possible 611. plFiberPlate : 43 possible sky positions to use as objects from a possible 610. plFiberPlate : 75 possible sky positions to use as objects from a possible 609. plFiberPlate : 54 possible sky positions to use as objects from a possible 608. plFiberPlate : 43 possible sky positions to use as objects from a possible 607. plFiberPlate : 42 possible sky positions to use as objects from a possible 606. plFiberPlate : 38 possible sky positions to use as objects from a possible 605. plFiberPlate : 35 possible sky positions to use as objects from a possible 604. plFiberPlate : 24 possible sky positions to use as objects from a possible 603. plFiberPlate : 16 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 25 possible sky positions to use as objects from a possible 600. plFiberPlate : 25 possible sky positions to use as objects from a possible 599. plFiberPlate : 49 possible sky positions to use as objects from a possible 598. plFiberPlate : 34 possible sky positions to use as objects from a possible 597. plFiberPlate : 38 possible sky positions to use as objects from a possible 596. plFiberPlate : 37 possible sky positions to use as objects from a possible 595. plFiberPlate : 29 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 34 possible sky positions to use as objects from a possible 591. plFiberPlate : 26 possible sky positions to use as objects from a possible 590. plFiberPlate : 30 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 26 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 725 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2802.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2803.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2803.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2804.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 667 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 152 2 22 142 3 11 138 4 14 153 5 12 163 6 13 143 7 22 138 8 33 143 9 15 177 10 29 230 11 25 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4800 40 4 32 42 plFiberPlate : adding spectro-photo std with objId = 4800 40 4 30 122 plFiberPlate : adding spectro-photo std with objId = 4800 40 1 22 62 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 48 64 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 45 97 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 40 76 plFiberPlate : adding spectro-photo std with objId = 4829 40 1 39 36 plFiberPlate : adding spectro-photo std with objId = 4800 40 4 22 95 plFiberPlate : 187 possible sky positions to use as objects from a possible 835. plFiberPlate : 113 possible sky positions to use as objects from a possible 834. plFiberPlate : 46 possible sky positions to use as objects from a possible 833. plFiberPlate : 42 possible sky positions to use as objects from a possible 832. plFiberPlate : 34 possible sky positions to use as objects from a possible 831. plFiberPlate : 39 possible sky positions to use as objects from a possible 830. plFiberPlate : 43 possible sky positions to use as objects from a possible 829. plFiberPlate : 113 possible sky positions to use as objects from a possible 828. plFiberPlate : 85 possible sky positions to use as objects from a possible 827. plFiberPlate : 66 possible sky positions to use as objects from a possible 826. plFiberPlate : 27 possible sky positions to use as objects from a possible 825. plFiberPlate : 29 possible sky positions to use as objects from a possible 824. plFiberPlate : 17 possible sky positions to use as objects from a possible 823. plFiberPlate : 32 possible sky positions to use as objects from a possible 822. plFiberPlate : 20 possible sky positions to use as objects from a possible 821. plFiberPlate : 12 possible sky positions to use as objects from a possible 820. plFiberPlate : 102 possible sky positions to use as objects from a possible 819. plFiberPlate : 74 possible sky positions to use as objects from a possible 818. plFiberPlate : 55 possible sky positions to use as objects from a possible 817. plFiberPlate : 34 possible sky positions to use as objects from a possible 816. plFiberPlate : 21 possible sky positions to use as objects from a possible 815. plFiberPlate : 21 possible sky positions to use as objects from a possible 814. plFiberPlate : 11 possible sky positions to use as objects from a possible 813. plFiberPlate : 23 possible sky positions to use as objects from a possible 812. plFiberPlate : 24 possible sky positions to use as objects from a possible 811. plFiberPlate : 68 possible sky positions to use as objects from a possible 810. plFiberPlate : 59 possible sky positions to use as objects from a possible 809. plFiberPlate : 38 possible sky positions to use as objects from a possible 808. plFiberPlate : 26 possible sky positions to use as objects from a possible 807. plFiberPlate : 25 possible sky positions to use as objects from a possible 806. plFiberPlate : 13 possible sky positions to use as objects from a possible 805. plFiberPlate : 32 possible sky positions to use as objects from a possible 804. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 735 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2803.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2804.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2804.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2805.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 50 151 2 36 111 3 35 117 4 29 141 5 35 146 6 36 112 7 30 141 8 36 163 9 35 165 10 67 213 11 48 149 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6519 40 6 25 62 plFiberPlate : adding spectro-photo std with objId = 6519 40 6 23 241 plFiberPlate : adding spectro-photo std with objId = 6519 40 6 17 100 plFiberPlate : adding spectro-photo std with objId = 6519 40 5 17 205 plFiberPlate : adding spectro-photo std with objId = 6519 40 4 16 217 plFiberPlate : adding spectro-photo std with objId = 6519 40 5 14 95 plFiberPlate : adding spectro-photo std with objId = 6519 40 3 14 37 plFiberPlate : adding spectro-photo std with objId = 6519 40 2 14 128 plFiberPlate : 147 possible sky positions to use as objects from a possible 794. plFiberPlate : 116 possible sky positions to use as objects from a possible 793. plFiberPlate : 78 possible sky positions to use as objects from a possible 792. plFiberPlate : 27 possible sky positions to use as objects from a possible 791. plFiberPlate : 34 possible sky positions to use as objects from a possible 790. plFiberPlate : 44 possible sky positions to use as objects from a possible 789. plFiberPlate : 71 possible sky positions to use as objects from a possible 788. plFiberPlate : 107 possible sky positions to use as objects from a possible 787. plFiberPlate : 93 possible sky positions to use as objects from a possible 786. plFiberPlate : 68 possible sky positions to use as objects from a possible 785. plFiberPlate : 50 possible sky positions to use as objects from a possible 784. plFiberPlate : 24 possible sky positions to use as objects from a possible 783. plFiberPlate : 20 possible sky positions to use as objects from a possible 782. plFiberPlate : 28 possible sky positions to use as objects from a possible 781. plFiberPlate : 26 possible sky positions to use as objects from a possible 780. plFiberPlate : 22 possible sky positions to use as objects from a possible 779. plFiberPlate : 108 possible sky positions to use as objects from a possible 778. plFiberPlate : 88 possible sky positions to use as objects from a possible 777. plFiberPlate : 63 possible sky positions to use as objects from a possible 776. plFiberPlate : 52 possible sky positions to use as objects from a possible 775. plFiberPlate : 40 possible sky positions to use as objects from a possible 774. plFiberPlate : 34 possible sky positions to use as objects from a possible 773. plFiberPlate : 49 possible sky positions to use as objects from a possible 772. plFiberPlate : 16 possible sky positions to use as objects from a possible 771. plFiberPlate : 20 possible sky positions to use as objects from a possible 770. plFiberPlate : 39 possible sky positions to use as objects from a possible 769. plFiberPlate : 45 possible sky positions to use as objects from a possible 768. plFiberPlate : 34 possible sky positions to use as objects from a possible 767. plFiberPlate : 24 possible sky positions to use as objects from a possible 766. plFiberPlate : 30 possible sky positions to use as objects from a possible 765. plFiberPlate : 27 possible sky positions to use as objects from a possible 764. plFiberPlate : 33 possible sky positions to use as objects from a possible 763. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 740 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2804.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2805.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2805.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2806.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 95 100 2 65 64 3 73 67 4 77 75 5 109 70 6 66 70 7 56 83 8 85 100 9 80 101 10 114 125 11 83 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6574 40 6 24 145 plFiberPlate : adding spectro-photo std with objId = 6574 40 6 23 466 plFiberPlate : adding spectro-photo std with objId = 6574 40 5 19 225 plFiberPlate : adding spectro-photo std with objId = 6574 40 5 18 455 plFiberPlate : adding spectro-photo std with objId = 6574 40 4 18 37 plFiberPlate : adding spectro-photo std with objId = 6574 40 2 18 478 plFiberPlate : adding spectro-photo std with objId = 6574 40 4 17 389 plFiberPlate : adding spectro-photo std with objId = 6574 40 3 17 616 plFiberPlate : 79 possible sky positions to use as objects from a possible 460. plFiberPlate : 62 possible sky positions to use as objects from a possible 459. plFiberPlate : 46 possible sky positions to use as objects from a possible 458. plFiberPlate : 28 possible sky positions to use as objects from a possible 457. plFiberPlate : 17 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 63 possible sky positions to use as objects from a possible 454. plFiberPlate : 70 possible sky positions to use as objects from a possible 453. plFiberPlate : 49 possible sky positions to use as objects from a possible 452. plFiberPlate : 34 possible sky positions to use as objects from a possible 451. plFiberPlate : 20 possible sky positions to use as objects from a possible 450. plFiberPlate : 7 possible sky positions to use as objects from a possible 449. plFiberPlate : 7 possible sky positions to use as objects from a possible 448. plFiberPlate : 15 possible sky positions to use as objects from a possible 447. plFiberPlate : 35 possible sky positions to use as objects from a possible 446. plFiberPlate : 23 possible sky positions to use as objects from a possible 445. plFiberPlate : 68 possible sky positions to use as objects from a possible 444. plFiberPlate : 52 possible sky positions to use as objects from a possible 443. plFiberPlate : 33 possible sky positions to use as objects from a possible 442. plFiberPlate : 14 possible sky positions to use as objects from a possible 441. plFiberPlate : 10 possible sky positions to use as objects from a possible 440. plFiberPlate : 20 possible sky positions to use as objects from a possible 439. plFiberPlate : 18 possible sky positions to use as objects from a possible 438. plFiberPlate : 13 possible sky positions to use as objects from a possible 437. plFiberPlate : 13 possible sky positions to use as objects from a possible 436. plFiberPlate : 25 possible sky positions to use as objects from a possible 435. plFiberPlate : 24 possible sky positions to use as objects from a possible 434. plFiberPlate : 32 possible sky positions to use as objects from a possible 433. plFiberPlate : 22 possible sky positions to use as objects from a possible 432. plFiberPlate : 14 possible sky positions to use as objects from a possible 431. plFiberPlate : 17 possible sky positions to use as objects from a possible 430. plFiberPlate : 23 possible sky positions to use as objects from a possible 429. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 745 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2805.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2806.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2806.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2807.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 71 132 2 56 87 3 53 93 4 31 130 5 45 135 6 42 93 7 31 112 8 38 141 9 38 151 10 98 181 11 79 122 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6574 40 6 67 55 plFiberPlate : adding spectro-photo std with objId = 6574 40 6 64 263 plFiberPlate : adding spectro-photo std with objId = 6574 40 5 61 176 plFiberPlate : adding spectro-photo std with objId = 6574 40 5 60 109 plFiberPlate : adding spectro-photo std with objId = 6574 40 4 58 185 plFiberPlate : adding spectro-photo std with objId = 6574 40 4 58 11 plFiberPlate : adding spectro-photo std with objId = 6574 40 3 58 357 plFiberPlate : adding spectro-photo std with objId = 6574 40 3 58 201 plFiberPlate : 137 possible sky positions to use as objects from a possible 683. plFiberPlate : 103 possible sky positions to use as objects from a possible 682. plFiberPlate : 71 possible sky positions to use as objects from a possible 681. plFiberPlate : 34 possible sky positions to use as objects from a possible 680. plFiberPlate : 23 possible sky positions to use as objects from a possible 679. plFiberPlate : 42 possible sky positions to use as objects from a possible 678. plFiberPlate : 62 possible sky positions to use as objects from a possible 677. plFiberPlate : 111 possible sky positions to use as objects from a possible 676. plFiberPlate : 86 possible sky positions to use as objects from a possible 675. plFiberPlate : 59 possible sky positions to use as objects from a possible 674. plFiberPlate : 42 possible sky positions to use as objects from a possible 673. plFiberPlate : 14 possible sky positions to use as objects from a possible 672. plFiberPlate : 19 possible sky positions to use as objects from a possible 671. plFiberPlate : 21 possible sky positions to use as objects from a possible 670. plFiberPlate : 21 possible sky positions to use as objects from a possible 669. plFiberPlate : 31 possible sky positions to use as objects from a possible 668. plFiberPlate : 102 possible sky positions to use as objects from a possible 667. plFiberPlate : 93 possible sky positions to use as objects from a possible 666. plFiberPlate : 66 possible sky positions to use as objects from a possible 665. plFiberPlate : 44 possible sky positions to use as objects from a possible 664. plFiberPlate : 23 possible sky positions to use as objects from a possible 663. plFiberPlate : 29 possible sky positions to use as objects from a possible 662. plFiberPlate : 25 possible sky positions to use as objects from a possible 661. plFiberPlate : 40 possible sky positions to use as objects from a possible 660. plFiberPlate : 25 possible sky positions to use as objects from a possible 659. plFiberPlate : 34 possible sky positions to use as objects from a possible 658. plFiberPlate : 43 possible sky positions to use as objects from a possible 657. plFiberPlate : 25 possible sky positions to use as objects from a possible 656. plFiberPlate : 12 possible sky positions to use as objects from a possible 655. plFiberPlate : 25 possible sky positions to use as objects from a possible 654. plFiberPlate : 31 possible sky positions to use as objects from a possible 653. plFiberPlate : 22 possible sky positions to use as objects from a possible 652. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 743 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2806.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2807.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2807.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2808.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 37 173 2 40 126 3 31 92 4 31 153 5 29 188 6 21 135 7 21 105 8 16 154 9 24 163 10 66 219 11 51 153 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 49 207 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 46 215 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 46 27 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 44 75 plFiberPlate : adding spectro-photo std with objId = 4828 642 5 43 216 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 43 79 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 43 6 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 43 83 plFiberPlate : 146 possible sky positions to use as objects from a possible 832. plFiberPlate : 61 possible sky positions to use as objects from a possible 831. plFiberPlate : 25 possible sky positions to use as objects from a possible 830. plFiberPlate : 36 possible sky positions to use as objects from a possible 829. plFiberPlate : 32 possible sky positions to use as objects from a possible 828. plFiberPlate : 27 possible sky positions to use as objects from a possible 827. plFiberPlate : 66 possible sky positions to use as objects from a possible 826. plFiberPlate : 111 possible sky positions to use as objects from a possible 825. plFiberPlate : 84 possible sky positions to use as objects from a possible 824. plFiberPlate : 50 possible sky positions to use as objects from a possible 823. plFiberPlate : 28 possible sky positions to use as objects from a possible 822. plFiberPlate : 18 possible sky positions to use as objects from a possible 821. plFiberPlate : 15 possible sky positions to use as objects from a possible 820. plFiberPlate : 16 possible sky positions to use as objects from a possible 819. plFiberPlate : 26 possible sky positions to use as objects from a possible 818. plFiberPlate : 27 possible sky positions to use as objects from a possible 817. plFiberPlate : 121 possible sky positions to use as objects from a possible 816. plFiberPlate : 80 possible sky positions to use as objects from a possible 815. plFiberPlate : 74 possible sky positions to use as objects from a possible 814. plFiberPlate : 53 possible sky positions to use as objects from a possible 813. plFiberPlate : 26 possible sky positions to use as objects from a possible 812. plFiberPlate : 24 possible sky positions to use as objects from a possible 811. plFiberPlate : 25 possible sky positions to use as objects from a possible 810. plFiberPlate : 27 possible sky positions to use as objects from a possible 809. plFiberPlate : 33 possible sky positions to use as objects from a possible 808. plFiberPlate : 94 possible sky positions to use as objects from a possible 807. plFiberPlate : 59 possible sky positions to use as objects from a possible 806. plFiberPlate : 36 possible sky positions to use as objects from a possible 805. plFiberPlate : 25 possible sky positions to use as objects from a possible 804. plFiberPlate : 16 possible sky positions to use as objects from a possible 803. plFiberPlate : 21 possible sky positions to use as objects from a possible 802. plFiberPlate : 18 possible sky positions to use as objects from a possible 801. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 776 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2807.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2808.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2808.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2809.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 63 157 2 50 110 3 34 104 4 58 122 5 29 170 6 26 126 7 31 88 8 40 136 9 34 163 10 74 204 11 55 150 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 79 293 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 79 230 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 78 226 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 78 155 plFiberPlate : adding spectro-photo std with objId = 4828 642 5 77 155 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 77 23 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 76 80 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 76 69 plFiberPlate : 136 possible sky positions to use as objects from a possible 748. plFiberPlate : 90 possible sky positions to use as objects from a possible 747. plFiberPlate : 47 possible sky positions to use as objects from a possible 746. plFiberPlate : 54 possible sky positions to use as objects from a possible 745. plFiberPlate : 42 possible sky positions to use as objects from a possible 744. plFiberPlate : 29 possible sky positions to use as objects from a possible 743. plFiberPlate : 57 possible sky positions to use as objects from a possible 742. plFiberPlate : 78 possible sky positions to use as objects from a possible 741. plFiberPlate : 58 possible sky positions to use as objects from a possible 740. plFiberPlate : 52 possible sky positions to use as objects from a possible 739. plFiberPlate : 42 possible sky positions to use as objects from a possible 738. plFiberPlate : 22 possible sky positions to use as objects from a possible 737. plFiberPlate : 23 possible sky positions to use as objects from a possible 736. plFiberPlate : 22 possible sky positions to use as objects from a possible 735. plFiberPlate : 22 possible sky positions to use as objects from a possible 734. plFiberPlate : 26 possible sky positions to use as objects from a possible 733. plFiberPlate : 96 possible sky positions to use as objects from a possible 732. plFiberPlate : 84 possible sky positions to use as objects from a possible 731. plFiberPlate : 60 possible sky positions to use as objects from a possible 730. plFiberPlate : 19 possible sky positions to use as objects from a possible 729. plFiberPlate : 15 possible sky positions to use as objects from a possible 728. plFiberPlate : 15 possible sky positions to use as objects from a possible 727. plFiberPlate : 32 possible sky positions to use as objects from a possible 726. plFiberPlate : 14 possible sky positions to use as objects from a possible 725. plFiberPlate : 22 possible sky positions to use as objects from a possible 724. plFiberPlate : 68 possible sky positions to use as objects from a possible 723. plFiberPlate : 73 possible sky positions to use as objects from a possible 722. plFiberPlate : 33 possible sky positions to use as objects from a possible 721. plFiberPlate : 23 possible sky positions to use as objects from a possible 720. plFiberPlate : 16 possible sky positions to use as objects from a possible 719. plFiberPlate : 19 possible sky positions to use as objects from a possible 718. plFiberPlate : 13 possible sky positions to use as objects from a possible 717. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 771 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2808.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2809.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2809.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2810.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 68 148 2 60 107 3 56 84 4 72 113 5 65 138 6 47 109 7 50 89 8 43 134 9 55 142 10 85 197 11 66 145 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 113 197 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 112 381 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 110 228 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 110 190 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 110 229 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 110 77 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 109 500 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 109 511 plFiberPlate : 132 possible sky positions to use as objects from a possible 683. plFiberPlate : 73 possible sky positions to use as objects from a possible 682. plFiberPlate : 49 possible sky positions to use as objects from a possible 681. plFiberPlate : 51 possible sky positions to use as objects from a possible 680. plFiberPlate : 33 possible sky positions to use as objects from a possible 679. plFiberPlate : 33 possible sky positions to use as objects from a possible 678. plFiberPlate : 32 possible sky positions to use as objects from a possible 677. plFiberPlate : 80 possible sky positions to use as objects from a possible 676. plFiberPlate : 57 possible sky positions to use as objects from a possible 675. plFiberPlate : 44 possible sky positions to use as objects from a possible 674. plFiberPlate : 28 possible sky positions to use as objects from a possible 673. plFiberPlate : 14 possible sky positions to use as objects from a possible 672. plFiberPlate : 19 possible sky positions to use as objects from a possible 671. plFiberPlate : 15 possible sky positions to use as objects from a possible 670. plFiberPlate : 28 possible sky positions to use as objects from a possible 669. plFiberPlate : 12 possible sky positions to use as objects from a possible 668. plFiberPlate : 67 possible sky positions to use as objects from a possible 667. plFiberPlate : 67 possible sky positions to use as objects from a possible 666. plFiberPlate : 53 possible sky positions to use as objects from a possible 665. plFiberPlate : 36 possible sky positions to use as objects from a possible 664. plFiberPlate : 14 possible sky positions to use as objects from a possible 663. plFiberPlate : 15 possible sky positions to use as objects from a possible 662. plFiberPlate : 28 possible sky positions to use as objects from a possible 661. plFiberPlate : 27 possible sky positions to use as objects from a possible 660. plFiberPlate : 18 possible sky positions to use as objects from a possible 659. plFiberPlate : 54 possible sky positions to use as objects from a possible 658. plFiberPlate : 63 possible sky positions to use as objects from a possible 657. plFiberPlate : 35 possible sky positions to use as objects from a possible 656. plFiberPlate : 18 possible sky positions to use as objects from a possible 655. plFiberPlate : 18 possible sky positions to use as objects from a possible 654. plFiberPlate : 10 possible sky positions to use as objects from a possible 653. plFiberPlate : 19 possible sky positions to use as objects from a possible 652. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 791 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2809.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2810.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2810.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2811.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 134 112 2 96 82 3 77 74 4 109 106 5 92 131 6 74 110 7 78 86 8 95 107 9 95 131 10 170 158 11 131 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 149 470 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 149 382 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 145 705 plFiberPlate : adding spectro-photo std with objId = 4828 642 5 143 703 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 143 311 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 143 459 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 143 672 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 143 277 plFiberPlate : 109 possible sky positions to use as objects from a possible 608. plFiberPlate : 69 possible sky positions to use as objects from a possible 607. plFiberPlate : 35 possible sky positions to use as objects from a possible 606. plFiberPlate : 28 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : 24 possible sky positions to use as objects from a possible 602. plFiberPlate : 78 possible sky positions to use as objects from a possible 601. plFiberPlate : 50 possible sky positions to use as objects from a possible 600. plFiberPlate : 42 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 16 possible sky positions to use as objects from a possible 593. plFiberPlate : 70 possible sky positions to use as objects from a possible 592. plFiberPlate : 56 possible sky positions to use as objects from a possible 591. plFiberPlate : 33 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 25 possible sky positions to use as objects from a possible 584. plFiberPlate : 81 possible sky positions to use as objects from a possible 583. plFiberPlate : 72 possible sky positions to use as objects from a possible 582. plFiberPlate : 42 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 15 possible sky positions to use as objects from a possible 578. plFiberPlate : 23 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 842 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2810.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2811.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2811.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2812.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 173 75 2 134 48 3 105 53 4 173 71 5 202 82 6 164 58 7 120 44 8 148 61 9 190 65 10 233 96 11 159 61 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 226 2657 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 226 2637 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 223 979 plFiberPlate : adding spectro-photo std with objId = 4828 642 4 223 590 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 223 3800 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 223 2138 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 223 1405 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 222 4196 plFiberPlate : 72 possible sky positions to use as objects from a possible 347. plFiberPlate : 36 possible sky positions to use as objects from a possible 346. plFiberPlate : 21 possible sky positions to use as objects from a possible 345. plFiberPlate : 7 possible sky positions to use as objects from a possible 344. plFiberPlate : 23 possible sky positions to use as objects from a possible 343. plFiberPlate : 14 possible sky positions to use as objects from a possible 342. plFiberPlate : 34 possible sky positions to use as objects from a possible 341. plFiberPlate : 41 possible sky positions to use as objects from a possible 340. plFiberPlate : 37 possible sky positions to use as objects from a possible 339. plFiberPlate : 24 possible sky positions to use as objects from a possible 338. plFiberPlate : 6 possible sky positions to use as objects from a possible 337. plFiberPlate : 3 possible sky positions to use as objects from a possible 336. plFiberPlate : 14 possible sky positions to use as objects from a possible 335. plFiberPlate : 18 possible sky positions to use as objects from a possible 334. plFiberPlate : 6 possible sky positions to use as objects from a possible 333. plFiberPlate : 6 possible sky positions to use as objects from a possible 332. plFiberPlate : 41 possible sky positions to use as objects from a possible 331. plFiberPlate : 31 possible sky positions to use as objects from a possible 330. plFiberPlate : 19 possible sky positions to use as objects from a possible 329. plFiberPlate : 9 possible sky positions to use as objects from a possible 328. plFiberPlate : 9 possible sky positions to use as objects from a possible 327. plFiberPlate : 10 possible sky positions to use as objects from a possible 326. plFiberPlate : 16 possible sky positions to use as objects from a possible 325. plFiberPlate : 5 possible sky positions to use as objects from a possible 324. plFiberPlate : 4 possible sky positions to use as objects from a possible 323. plFiberPlate : 25 possible sky positions to use as objects from a possible 322. plFiberPlate : 29 possible sky positions to use as objects from a possible 321. plFiberPlate : 19 possible sky positions to use as objects from a possible 320. plFiberPlate : 9 possible sky positions to use as objects from a possible 319. plFiberPlate : 8 possible sky positions to use as objects from a possible 318. plFiberPlate : 8 possible sky positions to use as objects from a possible 317. plFiberPlate : 1 possible sky positions to use as objects from a possible 316. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 846 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2811.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2812.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2812.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2813.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 182 75 2 145 61 3 103 39 4 138 58 5 161 71 6 110 56 7 91 48 8 130 52 9 152 72 10 232 95 11 178 70 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 338 462 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 338 299 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 332 1450 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 332 1250 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 330 677 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 330 516 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 329 830 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 329 761 plFiberPlate : 65 possible sky positions to use as objects from a possible 342. plFiberPlate : 36 possible sky positions to use as objects from a possible 341. plFiberPlate : 23 possible sky positions to use as objects from a possible 340. plFiberPlate : 10 possible sky positions to use as objects from a possible 339. plFiberPlate : 17 possible sky positions to use as objects from a possible 338. plFiberPlate : 20 possible sky positions to use as objects from a possible 337. plFiberPlate : 29 possible sky positions to use as objects from a possible 336. plFiberPlate : 47 possible sky positions to use as objects from a possible 335. plFiberPlate : 54 possible sky positions to use as objects from a possible 334. plFiberPlate : 45 possible sky positions to use as objects from a possible 333. plFiberPlate : 38 possible sky positions to use as objects from a possible 332. plFiberPlate : 32 possible sky positions to use as objects from a possible 331. plFiberPlate : 21 possible sky positions to use as objects from a possible 330. plFiberPlate : 11 possible sky positions to use as objects from a possible 329. plFiberPlate : 14 possible sky positions to use as objects from a possible 328. plFiberPlate : 16 possible sky positions to use as objects from a possible 327. plFiberPlate : 47 possible sky positions to use as objects from a possible 326. plFiberPlate : 31 possible sky positions to use as objects from a possible 325. plFiberPlate : 23 possible sky positions to use as objects from a possible 324. plFiberPlate : 15 possible sky positions to use as objects from a possible 323. plFiberPlate : 11 possible sky positions to use as objects from a possible 322. plFiberPlate : 11 possible sky positions to use as objects from a possible 321. plFiberPlate : 8 possible sky positions to use as objects from a possible 320. plFiberPlate : 6 possible sky positions to use as objects from a possible 319. plFiberPlate : 18 possible sky positions to use as objects from a possible 318. plFiberPlate : 37 possible sky positions to use as objects from a possible 317. plFiberPlate : 34 possible sky positions to use as objects from a possible 316. plFiberPlate : 27 possible sky positions to use as objects from a possible 315. plFiberPlate : 13 possible sky positions to use as objects from a possible 314. plFiberPlate : 10 possible sky positions to use as objects from a possible 313. plFiberPlate : 16 possible sky positions to use as objects from a possible 312. plFiberPlate : 11 possible sky positions to use as objects from a possible 311. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 909 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2812.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2813.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2813.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2814.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 167 116 2 138 95 3 106 56 4 131 76 5 173 96 6 137 73 7 92 66 8 118 89 9 154 102 10 236 135 11 176 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 382 31 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 381 1604 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 378 1472 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 378 762 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 376 1513 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 376 1060 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 376 979 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 376 904 plFiberPlate : 85 possible sky positions to use as objects from a possible 497. plFiberPlate : 53 possible sky positions to use as objects from a possible 496. plFiberPlate : 34 possible sky positions to use as objects from a possible 495. plFiberPlate : 39 possible sky positions to use as objects from a possible 494. plFiberPlate : 31 possible sky positions to use as objects from a possible 493. plFiberPlate : 20 possible sky positions to use as objects from a possible 492. plFiberPlate : 32 possible sky positions to use as objects from a possible 491. plFiberPlate : 63 possible sky positions to use as objects from a possible 490. plFiberPlate : 42 possible sky positions to use as objects from a possible 489. plFiberPlate : 33 possible sky positions to use as objects from a possible 488. plFiberPlate : 20 possible sky positions to use as objects from a possible 487. plFiberPlate : 15 possible sky positions to use as objects from a possible 486. plFiberPlate : 8 possible sky positions to use as objects from a possible 485. plFiberPlate : 14 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 19 possible sky positions to use as objects from a possible 482. plFiberPlate : 64 possible sky positions to use as objects from a possible 481. plFiberPlate : 42 possible sky positions to use as objects from a possible 480. plFiberPlate : 45 possible sky positions to use as objects from a possible 479. plFiberPlate : 29 possible sky positions to use as objects from a possible 478. plFiberPlate : 23 possible sky positions to use as objects from a possible 477. plFiberPlate : 15 possible sky positions to use as objects from a possible 476. plFiberPlate : 26 possible sky positions to use as objects from a possible 475. plFiberPlate : 21 possible sky positions to use as objects from a possible 474. plFiberPlate : 10 possible sky positions to use as objects from a possible 473. plFiberPlate : 26 possible sky positions to use as objects from a possible 472. plFiberPlate : 28 possible sky positions to use as objects from a possible 471. plFiberPlate : 27 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 11 possible sky positions to use as objects from a possible 467. plFiberPlate : 6 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 788 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2813.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2814.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2814.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2815.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 589 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 99 133 2 96 94 3 68 85 4 92 103 5 82 136 6 63 119 7 64 84 8 67 117 9 69 138 10 147 189 11 112 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 451 523 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 451 406 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 445 667 plFiberPlate : adding spectro-photo std with objId = 4828 642 1 445 426 plFiberPlate : adding spectro-photo std with objId = 4828 642 2 444 80 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 443 640 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 443 440 plFiberPlate : adding spectro-photo std with objId = 4828 642 3 443 385 plFiberPlate : 120 possible sky positions to use as objects from a possible 646. plFiberPlate : 75 possible sky positions to use as objects from a possible 645. plFiberPlate : 35 possible sky positions to use as objects from a possible 644. plFiberPlate : 12 possible sky positions to use as objects from a possible 643. plFiberPlate : 30 possible sky positions to use as objects from a possible 642. plFiberPlate : 32 possible sky positions to use as objects from a possible 641. plFiberPlate : 44 possible sky positions to use as objects from a possible 640. plFiberPlate : 75 possible sky positions to use as objects from a possible 639. plFiberPlate : 66 possible sky positions to use as objects from a possible 638. plFiberPlate : 41 possible sky positions to use as objects from a possible 637. plFiberPlate : 46 possible sky positions to use as objects from a possible 636. plFiberPlate : 31 possible sky positions to use as objects from a possible 635. plFiberPlate : 14 possible sky positions to use as objects from a possible 634. plFiberPlate : 21 possible sky positions to use as objects from a possible 633. plFiberPlate : 26 possible sky positions to use as objects from a possible 632. plFiberPlate : 23 possible sky positions to use as objects from a possible 631. plFiberPlate : 70 possible sky positions to use as objects from a possible 630. plFiberPlate : 51 possible sky positions to use as objects from a possible 629. plFiberPlate : 51 possible sky positions to use as objects from a possible 628. plFiberPlate : 31 possible sky positions to use as objects from a possible 627. plFiberPlate : 22 possible sky positions to use as objects from a possible 626. plFiberPlate : 11 possible sky positions to use as objects from a possible 625. plFiberPlate : 21 possible sky positions to use as objects from a possible 624. plFiberPlate : 20 possible sky positions to use as objects from a possible 623. plFiberPlate : 25 possible sky positions to use as objects from a possible 622. plFiberPlate : 59 possible sky positions to use as objects from a possible 621. plFiberPlate : 78 possible sky positions to use as objects from a possible 620. plFiberPlate : 44 possible sky positions to use as objects from a possible 619. plFiberPlate : 29 possible sky positions to use as objects from a possible 618. plFiberPlate : 23 possible sky positions to use as objects from a possible 617. plFiberPlate : 18 possible sky positions to use as objects from a possible 616. plFiberPlate : 8 possible sky positions to use as objects from a possible 615. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 756 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2814.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2815.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2815.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2007.07.1/plPlugMapP-2816.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 182 2 6 129 3 8 123 4 14 155 5 2 182 6 6 134 7 8 121 8 8 171 9 6 186 10 20 231 11 11 174 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 254 2 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 249 59 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 248 44 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 247 80 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 244 25 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 244 47 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 243 27 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 242 57 plFiberPlate : 162 possible sky positions to use as objects from a possible 869. plFiberPlate : 138 possible sky positions to use as objects from a possible 868. plFiberPlate : 81 possible sky positions to use as objects from a possible 867. plFiberPlate : 63 possible sky positions to use as objects from a possible 866. plFiberPlate : 38 possible sky positions to use as objects from a possible 865. plFiberPlate : 47 possible sky positions to use as objects from a possible 864. plFiberPlate : 61 possible sky positions to use as objects from a possible 863. plFiberPlate : 119 possible sky positions to use as objects from a possible 862. plFiberPlate : 87 possible sky positions to use as objects from a possible 861. plFiberPlate : 59 possible sky positions to use as objects from a possible 860. plFiberPlate : 37 possible sky positions to use as objects from a possible 859. plFiberPlate : 25 possible sky positions to use as objects from a possible 858. plFiberPlate : 13 possible sky positions to use as objects from a possible 857. plFiberPlate : 36 possible sky positions to use as objects from a possible 856. plFiberPlate : 19 possible sky positions to use as objects from a possible 855. plFiberPlate : 27 possible sky positions to use as objects from a possible 854. plFiberPlate : 100 possible sky positions to use as objects from a possible 853. plFiberPlate : 103 possible sky positions to use as objects from a possible 852. plFiberPlate : 60 possible sky positions to use as objects from a possible 851. plFiberPlate : 44 possible sky positions to use as objects from a possible 850. plFiberPlate : 15 possible sky positions to use as objects from a possible 849. plFiberPlate : 31 possible sky positions to use as objects from a possible 848. plFiberPlate : 25 possible sky positions to use as objects from a possible 847. plFiberPlate : 28 possible sky positions to use as objects from a possible 846. plFiberPlate : 32 possible sky positions to use as objects from a possible 845. plFiberPlate : 87 possible sky positions to use as objects from a possible 844. plFiberPlate : 57 possible sky positions to use as objects from a possible 843. plFiberPlate : 41 possible sky positions to use as objects from a possible 842. plFiberPlate : 19 possible sky positions to use as objects from a possible 841. plFiberPlate : 22 possible sky positions to use as objects from a possible 840. plFiberPlate : 27 possible sky positions to use as objects from a possible 839. plFiberPlate : 22 possible sky positions to use as objects from a possible 838. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 691 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2815.ps/CPS Open /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2816.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2007.07.1/plOverlay-2816.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sun Jul 22 15:59:44 CDT 2007 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_59/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_59/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 21 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 85 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2796.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2796.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2796.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 135 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2797.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2797.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2797.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 168 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2798.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2798.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2798.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 100 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2799.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2799.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2799.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 258 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2800.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2800.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2800.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 67 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2801.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2801.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2801.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 103 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2802.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2802.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2802.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 63 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2803.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2803.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2803.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 73 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2804.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2804.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2804.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 78 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2805.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2805.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2805.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 83 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2806.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2806.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2806.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 81 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2807.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2807.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2807.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 114 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2808.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2808.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2808.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 109 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2809.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2809.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2809.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 129 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2810.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2810.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2810.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 180 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2811.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2811.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2811.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 184 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2812.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2812.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2812.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 247 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2813.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2813.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2813.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 126 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2814.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2814.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2814.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 94 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2815.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2815.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2815.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 29 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2816.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2816.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2007.07.1/plFanuc-2816.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sun Jul 22 16:00:43 CDT 2007 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_59/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_59/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0xa189f9c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 21 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2796 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 747 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2797 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 797 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2798 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 830 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2799 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 762 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2800 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 920 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2801 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 729 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2802 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 765 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2803 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 725 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2804 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 735 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2805 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 740 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2806 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 745 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2807 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 743 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2808 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 776 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2809 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 771 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2810 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 791 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2811 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 842 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2812 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 846 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2813 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 909 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2814 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 788 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2815 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 756 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2816 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 5 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 691 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sun Jul 22 16:01:05 CDT 2007 Begin running "plateEnder dr2007.07.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_59/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_59/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2007.07.1 -morePipes 1" failed. PS: Read file for stderr output of this job.