Sender: LSF System Subject: Job 38523: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Nov 26 13:43:04 2001 Results reported at Mon Nov 26 13:48:40 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_37 -f NULL -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.11.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 294.19 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Nov 26 13:43:07 CST 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Nov 26 13:43:10 CST 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/ktools/v1_4/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/p/OSF1/tex/v3_14159/bin:/p/OSF1/netscape/v3_0g/bin:/p/OSF1/ximagetools/v3_0/bin:/p/OSF1/iraf/v2_11_3/bin:/home/s1/danvb/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5c/bin:/p/OSF1/photo/v5_2_26/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/GENERIC_UNIX/dp/v11_37/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_11/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_1/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Mon Nov 26 13:43:10 CST 2001 ASTROM_DIR=/p/OSF1/astrom/v3_5c ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_1 DP_DIR=/p/GENERIC_UNIX/dp/v11_37 DUST_DIR=/p/IRIX6/dust/v1_0 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INFO_DIR=/fnal/ups/prd/Info/v1_6 INT_DIR=/p/OSF1/dervish/v8_1/doc/www/dervish.home.html IRAF_DIR=/p/OSF1/iraf/v2_11_3 KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NETSCAPE_DIR=/p/OSF1/netscape/v3_0g NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_2 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_26 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_11 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TEX_DIR=/p/OSF1/tex/v3_14159 TEX_FILES_DIR=/p/GENERIC_UNIX/tex_files/v3_14159 TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XIMAGETOOLS_DIR=/p/OSF1/ximagetools/v3_0 --------------------------------------------------------------- Mon Nov 26 13:43:10 CST 2001 Begin running plate --------------------------------------------------------------- Mon Nov 26 13:43:10 CST 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e138e8 makePlates : beginning loop over plObs chain; makePlates : making 23 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0560.par makePlates : plateInfo struct for plate 774 : (h2).mjd 52316 (h2).raCen 166.013 (h2).decCen 61.18136 (h2).haCen -46 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.013 61.181 166.013 62.681 plMakePlateFromTile : mjd of obs : 52316.646335 Observed HA/dec of plate center, fiducial point (deg) : -46.002 61.163 -46.001 62.663 The rotation angle of the fid. point is 112.480510 plMakePlateFromTile : beginning loop over 1316 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0561.par makePlates : plateInfo struct for plate 775 : (h2).mjd 52316 (h2).raCen 170.142 (h2).decCen 61.82053 (h2).haCen -35 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.142 61.821 170.142 63.321 plMakePlateFromTile : mjd of obs : 52316.688260 Observed HA/dec of plate center, fiducial point (deg) : -35.002 61.800 -35.001 63.299 The rotation angle of the fid. point is 126.045015 plMakePlateFromTile : beginning loop over 1371 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0562.par makePlates : plateInfo struct for plate 776 : (h2).mjd 52316 (h2).raCen 173.8541 (h2).decCen 62.14873 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.854 62.149 173.854 63.649 plMakePlateFromTile : mjd of obs : 52316.812187 Observed HA/dec of plate center, fiducial point (deg) : 5.998 62.126 5.997 63.625 The rotation angle of the fid. point is -169.737670 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0563.par makePlates : plateInfo struct for plate 777 : (h2).mjd 52316 (h2).raCen 177.826 (h2).decCen 62.36418 (h2).haCen 2 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.826 62.364 177.826 63.864 plMakePlateFromTile : mjd of obs : 52316.812098 Observed HA/dec of plate center, fiducial point (deg) : 1.998 62.341 1.997 63.840 The rotation angle of the fid. point is -176.585331 plMakePlateFromTile : beginning loop over 1357 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0564.par makePlates : plateInfo struct for plate 778 : (h2).mjd 52316 (h2).raCen 181.142 (h2).decCen 62.61917 (h2).haCen -1 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.142 62.619 181.142 64.119 plMakePlateFromTile : mjd of obs : 52316.812964 Observed HA/dec of plate center, fiducial point (deg) : -1.002 62.595 -1.003 64.095 The rotation angle of the fid. point is 178.313417 plMakePlateFromTile : beginning loop over 1348 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0565.par makePlates : plateInfo struct for plate 779 : (h2).mjd 52316 (h2).raCen 184.0176 (h2).decCen 62.60979 (h2).haCen -4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.018 62.610 184.018 64.110 plMakePlateFromTile : mjd of obs : 52316.812610 Observed HA/dec of plate center, fiducial point (deg) : -4.002 62.586 -4.002 64.085 The rotation angle of the fid. point is 173.246898 plMakePlateFromTile : beginning loop over 1359 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0566.par makePlates : plateInfo struct for plate 780 : (h2).mjd 52316 (h2).raCen 186.9383 (h2).decCen 62.72568 (h2).haCen -6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.938 62.726 186.938 64.226 plMakePlateFromTile : mjd of obs : 52316.815154 Observed HA/dec of plate center, fiducial point (deg) : -6.002 62.702 -6.002 64.201 The rotation angle of the fid. point is 169.924641 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0567.par makePlates : plateInfo struct for plate 781 : (h2).mjd 52316 (h2).raCen 190.2491 (h2).decCen 62.43892 (h2).haCen -10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.249 62.439 190.249 63.939 plMakePlateFromTile : mjd of obs : 52316.813233 Observed HA/dec of plate center, fiducial point (deg) : -10.002 62.415 -10.002 63.914 The rotation angle of the fid. point is 163.179638 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0568.par makePlates : plateInfo struct for plate 782 : (h2).mjd 52316 (h2).raCen 193.5186 (h2).decCen 62.49657 (h2).haCen 1 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.519 62.497 193.519 63.997 plMakePlateFromTile : mjd of obs : 52316.852777 Observed HA/dec of plate center, fiducial point (deg) : 0.998 62.472 0.998 63.972 The rotation angle of the fid. point is -178.303652 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0569.par makePlates : plateInfo struct for plate 783 : (h2).mjd 52316 (h2).raCen 196.6172 (h2).decCen 62.16246 (h2).haCen -1 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.617 62.162 196.617 63.662 plMakePlateFromTile : mjd of obs : 52316.855812 Observed HA/dec of plate center, fiducial point (deg) : -1.002 62.138 -1.002 63.638 The rotation angle of the fid. point is 178.281418 plMakePlateFromTile : beginning loop over 1340 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0570.par makePlates : plateInfo struct for plate 784 : (h2).mjd 52316 (h2).raCen 199.7248 (h2).decCen 61.85325 (h2).haCen -4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.725 61.853 199.725 63.353 plMakePlateFromTile : mjd of obs : 52316.856101 Observed HA/dec of plate center, fiducial point (deg) : -4.002 61.829 -4.002 63.329 The rotation angle of the fid. point is 173.079867 plMakePlateFromTile : beginning loop over 1343 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0571.par makePlates : plateInfo struct for plate 785 : (h2).mjd 52316 (h2).raCen 203.0984 (h2).decCen 61.37955 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.098 61.380 203.098 62.880 plMakePlateFromTile : mjd of obs : 52316.893161 Observed HA/dec of plate center, fiducial point (deg) : 5.998 61.356 5.998 62.855 The rotation angle of the fid. point is -169.504773 plMakePlateFromTile : beginning loop over 1327 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0572.par makePlates : plateInfo struct for plate 786 : (h2).mjd 52316 (h2).raCen 206.4035 (h2).decCen 60.94572 (h2).haCen 3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.404 60.946 206.404 62.446 plMakePlateFromTile : mjd of obs : 52316.893997 Observed HA/dec of plate center, fiducial point (deg) : 2.998 60.922 2.998 62.422 The rotation angle of the fid. point is -174.665189 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0573.par makePlates : plateInfo struct for plate 787 : (h2).mjd 52316 (h2).raCen 209.6256 (h2).decCen 60.36317 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 209.626 60.363 209.626 61.863 plMakePlateFromTile : mjd of obs : 52316.894603 Observed HA/dec of plate center, fiducial point (deg) : -0.002 60.340 -0.002 61.839 The rotation angle of the fid. point is 179.990151 plMakePlateFromTile : beginning loop over 1342 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0574.par makePlates : plateInfo struct for plate 788 : (h2).mjd 52316 (h2).raCen 212.8219 (h2).decCen 59.62892 (h2).haCen -2 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 212.822 59.629 212.822 61.129 plMakePlateFromTile : mjd of obs : 52316.897911 Observed HA/dec of plate center, fiducial point (deg) : -2.002 59.606 -2.002 61.106 The rotation angle of the fid. point is 176.263755 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0575.par makePlates : plateInfo struct for plate 789 : (h2).mjd 52316 (h2).raCen 216.1796 (h2).decCen 58.8852 (h2).haCen -6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 216.180 58.885 216.180 60.385 plMakePlateFromTile : mjd of obs : 52316.896122 Observed HA/dec of plate center, fiducial point (deg) : -6.002 58.863 -6.002 60.363 The rotation angle of the fid. point is 168.580681 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0576.par makePlates : plateInfo struct for plate 790 : (h2).mjd 52316 (h2).raCen 218.9329 (h2).decCen 58.02881 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 218.933 58.029 218.933 59.529 plMakePlateFromTile : mjd of obs : 52316.937007 Observed HA/dec of plate center, fiducial point (deg) : 5.998 58.007 5.998 59.507 The rotation angle of the fid. point is -168.254768 plMakePlateFromTile : beginning loop over 1337 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (152.44, -13.94, 7.5) and (152.89, -13.65, 8.3) checkLTHo : distance = 0.542, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(152.89, -13.65, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0577.par makePlates : plateInfo struct for plate 791 : (h2).mjd 52316 (h2).raCen 221.6373 (h2).decCen 57.11531 (h2).haCen 3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 221.637 57.115 221.637 58.615 plMakePlateFromTile : mjd of obs : 52316.936181 Observed HA/dec of plate center, fiducial point (deg) : 2.998 57.094 2.998 58.594 The rotation angle of the fid. point is -173.899183 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-159.96, 185.14, 7.5) and (-159.50, 185.42, 8.3) checkLTHo : distance = 0.542, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-159.50, 185.42, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0578.par makePlates : plateInfo struct for plate 792 : (h2).mjd 52316 (h2).raCen 224.7759 (h2).decCen 56.07289 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 224.776 56.073 224.776 57.573 plMakePlateFromTile : mjd of obs : 52316.978132 Observed HA/dec of plate center, fiducial point (deg) : 14.998 56.053 14.998 57.552 The rotation angle of the fid. point is -149.638117 plMakePlateFromTile : beginning loop over 1367 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0579.par makePlates : plateInfo struct for plate 793 : (h2).mjd 52316 (h2).raCen 227.4283 (h2).decCen 54.8095 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 227.428 54.809 227.428 56.310 plMakePlateFromTile : mjd of obs : 52316.977163 Observed HA/dec of plate center, fiducial point (deg) : 11.998 54.790 11.998 56.290 The rotation angle of the fid. point is -154.096213 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0580.par makePlates : plateInfo struct for plate 794 : (h2).mjd 52316 (h2).raCen 230.3545 (h2).decCen 53.49575 (h2).haCen 24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 230.355 53.496 230.355 54.996 plMakePlateFromTile : mjd of obs : 52316.021261 Observed HA/dec of plate center, fiducial point (deg) : 24.000 53.478 24.000 54.977 The rotation angle of the fid. point is -130.787620 plMakePlateFromTile : beginning loop over 1277 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0581.par makePlates : plateInfo struct for plate 795 : (h2).mjd 52316 (h2).raCen 233.1484 (h2).decCen 52.11535 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.148 52.115 233.148 53.615 plMakePlateFromTile : mjd of obs : 52316.020684 Observed HA/dec of plate center, fiducial point (deg) : 21.000 52.098 21.000 53.598 The rotation angle of the fid. point is -133.587188 plMakePlateFromTile : beginning loop over 1315 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk27/complete//plPlugMapT-0582.par makePlates : plateInfo struct for plate 796 : (h2).mjd 52316 (h2).raCen 235.7025 (h2).decCen 50.59412 (h2).haCen 34 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 235.703 50.594 235.703 52.094 plMakePlateFromTile : mjd of obs : 52316.063787 Observed HA/dec of plate center, fiducial point (deg) : 34.000 50.579 34.000 52.079 The rotation angle of the fid. point is -112.489898 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Nov 26 13:44:17 CST 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 23 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0774.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 101 2 15 72 3 24 92 4 21 119 5 16 114 6 14 58 7 21 80 8 26 106 9 25 88 10 45 143 11 18 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1896 0 2 105 15 plFiberPlate : adding spectro-photo std with objId = 1896 0 3 106 5 plFiberPlate : adding spectro-photo std with objId = 2298 0 2 77 37 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 114 27 plFiberPlate : adding spectro-photo std with objId = 2298 0 6 73 56 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 117 28 plFiberPlate : adding spectro-photo std with objId = 2298 0 4 72 17 plFiberPlate : adding spectro-photo std with objId = 2298 0 1 73 41 plFiberPlate : 117 possible sky positions to use as objects from a possible 542. plFiberPlate : 67 possible sky positions to use as objects from a possible 541. plFiberPlate : 46 possible sky positions to use as objects from a possible 540. plFiberPlate : 45 possible sky positions to use as objects from a possible 539. plFiberPlate : 27 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 29 possible sky positions to use as objects from a possible 536. plFiberPlate : 63 possible sky positions to use as objects from a possible 535. plFiberPlate : 31 possible sky positions to use as objects from a possible 534. plFiberPlate : 21 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 9 possible sky positions to use as objects from a possible 530. plFiberPlate : 15 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 72 possible sky positions to use as objects from a possible 526. plFiberPlate : 43 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 3 possible sky positions to use as objects from a possible 522. plFiberPlate : 14 possible sky positions to use as objects from a possible 521. plFiberPlate : 13 possible sky positions to use as objects from a possible 520. plFiberPlate : 26 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 28 possible sky positions to use as objects from a possible 517. plFiberPlate : 17 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 9 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 10 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0774.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0774.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0775.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 103 2 14 76 3 26 78 4 24 117 5 17 133 6 15 113 7 19 100 8 22 109 9 15 126 10 36 131 11 25 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 121 10 plFiberPlate : adding spectro-photo std with objId = 2298 0 2 77 37 plFiberPlate : adding spectro-photo std with objId = 2298 0 4 75 32 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 125 31 plFiberPlate : adding spectro-photo std with objId = 2298 0 6 76 12 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 117 28 plFiberPlate : adding spectro-photo std with objId = 2298 0 4 72 17 plFiberPlate : adding spectro-photo std with objId = 1896 0 5 121 45 plFiberPlate : 103 possible sky positions to use as objects from a possible 605. plFiberPlate : 56 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : 28 possible sky positions to use as objects from a possible 602. plFiberPlate : 21 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 47 possible sky positions to use as objects from a possible 599. plFiberPlate : 89 possible sky positions to use as objects from a possible 598. plFiberPlate : 52 possible sky positions to use as objects from a possible 597. plFiberPlate : 34 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 16 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 5 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 31 possible sky positions to use as objects from a possible 590. plFiberPlate : 80 possible sky positions to use as objects from a possible 589. plFiberPlate : 49 possible sky positions to use as objects from a possible 588. plFiberPlate : 33 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 9 possible sky positions to use as objects from a possible 584. plFiberPlate : 42 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 66 possible sky positions to use as objects from a possible 580. plFiberPlate : 49 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : 24 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 16 possible sky positions to use as objects from a possible 575. plFiberPlate : 29 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0774.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0775.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0775.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0776.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 116 2 14 80 3 10 85 4 12 115 5 26 138 6 18 104 7 7 85 8 12 102 9 17 94 10 28 151 11 20 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2298 0 6 87 61 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 129 6 plFiberPlate : adding spectro-photo std with objId = 1896 0 2 135 19 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 164 18 plFiberPlate : adding spectro-photo std with objId = 1896 0 3 126 49 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 171 24 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 139 31 plFiberPlate : adding spectro-photo std with objId = 1896 0 5 132 25 plFiberPlate : 132 possible sky positions to use as objects from a possible 589. plFiberPlate : 58 possible sky positions to use as objects from a possible 588. plFiberPlate : 39 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 37 possible sky positions to use as objects from a possible 585. plFiberPlate : 32 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 80 possible sky positions to use as objects from a possible 582. plFiberPlate : 52 possible sky positions to use as objects from a possible 581. plFiberPlate : 23 possible sky positions to use as objects from a possible 580. plFiberPlate : 13 possible sky positions to use as objects from a possible 579. plFiberPlate : 4 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 69 possible sky positions to use as objects from a possible 573. plFiberPlate : 24 possible sky positions to use as objects from a possible 572. plFiberPlate : 5 possible sky positions to use as objects from a possible 571. plFiberPlate : 7 possible sky positions to use as objects from a possible 570. plFiberPlate : 9 possible sky positions to use as objects from a possible 569. plFiberPlate : 10 possible sky positions to use as objects from a possible 568. plFiberPlate : 13 possible sky positions to use as objects from a possible 567. plFiberPlate : 15 possible sky positions to use as objects from a possible 566. plFiberPlate : 10 possible sky positions to use as objects from a possible 565. plFiberPlate : 32 possible sky positions to use as objects from a possible 564. plFiberPlate : 9 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 12 possible sky positions to use as objects from a possible 560. plFiberPlate : 10 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0775.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0776.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0776.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0777.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 120 2 18 80 3 11 85 4 15 112 5 17 130 6 16 105 7 21 97 8 23 124 9 16 110 10 18 145 11 20 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 171 47 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 173 32 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 180 6 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 149 46 plFiberPlate : adding spectro-photo std with objId = 1896 0 5 147 44 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 174 10 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 171 24 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 139 31 plFiberPlate : 125 possible sky positions to use as objects from a possible 616. plFiberPlate : 90 possible sky positions to use as objects from a possible 615. plFiberPlate : 57 possible sky positions to use as objects from a possible 614. plFiberPlate : 38 possible sky positions to use as objects from a possible 613. plFiberPlate : 18 possible sky positions to use as objects from a possible 612. plFiberPlate : 29 possible sky positions to use as objects from a possible 611. plFiberPlate : 53 possible sky positions to use as objects from a possible 610. plFiberPlate : 90 possible sky positions to use as objects from a possible 609. plFiberPlate : 66 possible sky positions to use as objects from a possible 608. plFiberPlate : 36 possible sky positions to use as objects from a possible 607. plFiberPlate : 23 possible sky positions to use as objects from a possible 606. plFiberPlate : 10 possible sky positions to use as objects from a possible 605. plFiberPlate : 18 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 29 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 85 possible sky positions to use as objects from a possible 600. plFiberPlate : 45 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 7 possible sky positions to use as objects from a possible 596. plFiberPlate : 27 possible sky positions to use as objects from a possible 595. plFiberPlate : 24 possible sky positions to use as objects from a possible 594. plFiberPlate : 23 possible sky positions to use as objects from a possible 593. plFiberPlate : 20 possible sky positions to use as objects from a possible 592. plFiberPlate : 36 possible sky positions to use as objects from a possible 591. plFiberPlate : 53 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 4 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0776.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0777.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0777.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0778.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 101 2 15 77 3 20 87 4 19 126 5 26 126 6 15 101 7 13 95 8 15 112 9 13 113 10 31 140 11 17 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 190 33 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 189 12 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 185 53 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 180 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 188 64 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 184 2 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 162 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 187 23 plFiberPlate : 126 possible sky positions to use as objects from a possible 598. plFiberPlate : 56 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 38 possible sky positions to use as objects from a possible 592. plFiberPlate : 87 possible sky positions to use as objects from a possible 591. plFiberPlate : 65 possible sky positions to use as objects from a possible 590. plFiberPlate : 15 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 23 possible sky positions to use as objects from a possible 585. plFiberPlate : 5 possible sky positions to use as objects from a possible 584. plFiberPlate : 21 possible sky positions to use as objects from a possible 583. plFiberPlate : 74 possible sky positions to use as objects from a possible 582. plFiberPlate : 55 possible sky positions to use as objects from a possible 581. plFiberPlate : 28 possible sky positions to use as objects from a possible 580. plFiberPlate : 23 possible sky positions to use as objects from a possible 579. plFiberPlate : 12 possible sky positions to use as objects from a possible 578. plFiberPlate : 2 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 61 possible sky positions to use as objects from a possible 573. plFiberPlate : 21 possible sky positions to use as objects from a possible 572. plFiberPlate : 13 possible sky positions to use as objects from a possible 571. plFiberPlate : 20 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 23 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0777.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0778.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0778.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0779.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 126 2 13 80 3 13 80 4 20 96 5 22 130 6 22 109 7 17 90 8 19 111 9 28 111 10 28 161 11 17 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 189 12 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 163 35 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 185 53 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 202 34 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 168 34 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 162 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 187 23 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 197 28 plFiberPlate : 102 possible sky positions to use as objects from a possible 605. plFiberPlate : 60 possible sky positions to use as objects from a possible 604. plFiberPlate : 34 possible sky positions to use as objects from a possible 603. plFiberPlate : 36 possible sky positions to use as objects from a possible 602. plFiberPlate : 32 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 36 possible sky positions to use as objects from a possible 599. plFiberPlate : 73 possible sky positions to use as objects from a possible 598. plFiberPlate : 57 possible sky positions to use as objects from a possible 597. plFiberPlate : 47 possible sky positions to use as objects from a possible 596. plFiberPlate : 40 possible sky positions to use as objects from a possible 595. plFiberPlate : 23 possible sky positions to use as objects from a possible 594. plFiberPlate : 26 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 20 possible sky positions to use as objects from a possible 591. plFiberPlate : 29 possible sky positions to use as objects from a possible 590. plFiberPlate : 74 possible sky positions to use as objects from a possible 589. plFiberPlate : 51 possible sky positions to use as objects from a possible 588. plFiberPlate : 46 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 29 possible sky positions to use as objects from a possible 585. plFiberPlate : 25 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 20 possible sky positions to use as objects from a possible 581. plFiberPlate : 53 possible sky positions to use as objects from a possible 580. plFiberPlate : 43 possible sky positions to use as objects from a possible 579. plFiberPlate : 19 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 3 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 6 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0778.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0779.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0779.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0780.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 128 2 14 98 3 7 87 4 16 117 5 29 130 6 20 95 7 13 100 8 22 114 9 15 115 10 24 153 11 18 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 176 8 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 209 88 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 176 26 plFiberPlate : adding spectro-photo std with objId = 1896 0 6 168 34 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 208 13 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 203 74 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 197 28 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 202 34 plFiberPlate : 119 possible sky positions to use as objects from a possible 623. plFiberPlate : 60 possible sky positions to use as objects from a possible 622. plFiberPlate : 36 possible sky positions to use as objects from a possible 621. plFiberPlate : 28 possible sky positions to use as objects from a possible 620. plFiberPlate : 37 possible sky positions to use as objects from a possible 619. plFiberPlate : 44 possible sky positions to use as objects from a possible 618. plFiberPlate : 49 possible sky positions to use as objects from a possible 617. plFiberPlate : 100 possible sky positions to use as objects from a possible 616. plFiberPlate : 59 possible sky positions to use as objects from a possible 615. plFiberPlate : 49 possible sky positions to use as objects from a possible 614. plFiberPlate : 25 possible sky positions to use as objects from a possible 613. plFiberPlate : 10 possible sky positions to use as objects from a possible 612. plFiberPlate : 21 possible sky positions to use as objects from a possible 611. plFiberPlate : 18 possible sky positions to use as objects from a possible 610. plFiberPlate : 20 possible sky positions to use as objects from a possible 609. plFiberPlate : 39 possible sky positions to use as objects from a possible 608. plFiberPlate : 91 possible sky positions to use as objects from a possible 607. plFiberPlate : 48 possible sky positions to use as objects from a possible 606. plFiberPlate : 31 possible sky positions to use as objects from a possible 605. plFiberPlate : 17 possible sky positions to use as objects from a possible 604. plFiberPlate : 13 possible sky positions to use as objects from a possible 603. plFiberPlate : 16 possible sky positions to use as objects from a possible 602. plFiberPlate : 21 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 23 possible sky positions to use as objects from a possible 598. plFiberPlate : 22 possible sky positions to use as objects from a possible 597. plFiberPlate : 34 possible sky positions to use as objects from a possible 596. plFiberPlate : 10 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 19 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0779.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0780.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0780.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0781.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 122 2 23 80 3 18 69 4 22 107 5 23 116 6 16 95 7 11 83 8 12 89 9 19 104 10 37 148 11 27 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 210 8 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 85 80 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 209 88 plFiberPlate : adding spectro-photo std with objId = 1896 0 1 183 13 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 87 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 220 10 plFiberPlate : adding spectro-photo std with objId = 1896 0 4 176 26 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 208 13 plFiberPlate : 113 possible sky positions to use as objects from a possible 567. plFiberPlate : 67 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : 26 possible sky positions to use as objects from a possible 564. plFiberPlate : 27 possible sky positions to use as objects from a possible 563. plFiberPlate : 28 possible sky positions to use as objects from a possible 562. plFiberPlate : 43 possible sky positions to use as objects from a possible 561. plFiberPlate : 66 possible sky positions to use as objects from a possible 560. plFiberPlate : 56 possible sky positions to use as objects from a possible 559. plFiberPlate : 46 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 11 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 17 possible sky positions to use as objects from a possible 554. plFiberPlate : 27 possible sky positions to use as objects from a possible 553. plFiberPlate : 20 possible sky positions to use as objects from a possible 552. plFiberPlate : 70 possible sky positions to use as objects from a possible 551. plFiberPlate : 44 possible sky positions to use as objects from a possible 550. plFiberPlate : 25 possible sky positions to use as objects from a possible 549. plFiberPlate : 9 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 14 possible sky positions to use as objects from a possible 546. plFiberPlate : 2 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 49 possible sky positions to use as objects from a possible 542. plFiberPlate : 32 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 6 possible sky positions to use as objects from a possible 539. plFiberPlate : 5 possible sky positions to use as objects from a possible 538. plFiberPlate : 19 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0780.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0781.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0781.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0782.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 121 2 10 90 3 16 86 4 28 112 5 15 133 6 13 109 7 20 99 8 20 103 9 15 100 10 19 144 11 13 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 223 54 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 100 19 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 98 2 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 85 80 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 225 56 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 87 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 85 47 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 220 10 plFiberPlate : 125 possible sky positions to use as objects from a possible 622. plFiberPlate : 82 possible sky positions to use as objects from a possible 621. plFiberPlate : 19 possible sky positions to use as objects from a possible 620. plFiberPlate : 33 possible sky positions to use as objects from a possible 619. plFiberPlate : 23 possible sky positions to use as objects from a possible 618. plFiberPlate : 30 possible sky positions to use as objects from a possible 617. plFiberPlate : 37 possible sky positions to use as objects from a possible 616. plFiberPlate : 89 possible sky positions to use as objects from a possible 615. plFiberPlate : 53 possible sky positions to use as objects from a possible 614. plFiberPlate : 18 possible sky positions to use as objects from a possible 613. plFiberPlate : 6 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 6 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 12 possible sky positions to use as objects from a possible 608. plFiberPlate : 10 possible sky positions to use as objects from a possible 607. plFiberPlate : 71 possible sky positions to use as objects from a possible 606. plFiberPlate : 40 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 9 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 13 possible sky positions to use as objects from a possible 598. plFiberPlate : 74 possible sky positions to use as objects from a possible 597. plFiberPlate : 42 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 18 possible sky positions to use as objects from a possible 593. plFiberPlate : 5 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0781.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0782.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0782.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0783.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 118 2 10 80 3 10 73 4 11 108 5 18 127 6 21 104 7 17 98 8 12 110 9 13 116 10 22 160 11 15 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 240 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 242 13 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 99 17 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 231 26 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 105 26 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 106 18 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 107 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 242 29 plFiberPlate : 116 possible sky positions to use as objects from a possible 611. plFiberPlate : 57 possible sky positions to use as objects from a possible 610. plFiberPlate : 28 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 27 possible sky positions to use as objects from a possible 607. plFiberPlate : 48 possible sky positions to use as objects from a possible 606. plFiberPlate : 24 possible sky positions to use as objects from a possible 605. plFiberPlate : 106 possible sky positions to use as objects from a possible 604. plFiberPlate : 64 possible sky positions to use as objects from a possible 603. plFiberPlate : 37 possible sky positions to use as objects from a possible 602. plFiberPlate : 19 possible sky positions to use as objects from a possible 601. plFiberPlate : 19 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 62 possible sky positions to use as objects from a possible 595. plFiberPlate : 51 possible sky positions to use as objects from a possible 594. plFiberPlate : 39 possible sky positions to use as objects from a possible 593. plFiberPlate : 25 possible sky positions to use as objects from a possible 592. plFiberPlate : 20 possible sky positions to use as objects from a possible 591. plFiberPlate : 27 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : 16 possible sky positions to use as objects from a possible 587. plFiberPlate : 87 possible sky positions to use as objects from a possible 586. plFiberPlate : 44 possible sky positions to use as objects from a possible 585. plFiberPlate : 32 possible sky positions to use as objects from a possible 584. plFiberPlate : 18 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 30 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0782.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0783.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0783.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0784.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 121 2 13 100 3 7 83 4 12 105 5 18 137 6 15 110 7 14 101 8 16 102 9 11 114 10 11 153 11 8 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 113 23 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 119 8 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 253 28 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 113 22 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 111 35 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 107 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 242 29 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 117 28 plFiberPlate : 127 possible sky positions to use as objects from a possible 614. plFiberPlate : 78 possible sky positions to use as objects from a possible 613. plFiberPlate : 43 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 22 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 71 possible sky positions to use as objects from a possible 608. plFiberPlate : 102 possible sky positions to use as objects from a possible 607. plFiberPlate : 65 possible sky positions to use as objects from a possible 606. plFiberPlate : 52 possible sky positions to use as objects from a possible 605. plFiberPlate : 20 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 30 possible sky positions to use as objects from a possible 601. plFiberPlate : 15 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 59 possible sky positions to use as objects from a possible 598. plFiberPlate : 32 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 9 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 4 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 70 possible sky positions to use as objects from a possible 589. plFiberPlate : 60 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0783.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0784.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0784.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0785.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 137 2 12 90 3 12 55 4 11 101 5 14 121 6 14 93 7 18 92 8 18 108 9 18 113 10 21 138 11 16 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 120 43 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 125 13 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 125 31 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 125 65 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 254 6 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 127 55 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 124 36 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 117 28 plFiberPlate : 78 possible sky positions to use as objects from a possible 590. plFiberPlate : 32 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 11 possible sky positions to use as objects from a possible 587. plFiberPlate : 23 possible sky positions to use as objects from a possible 586. plFiberPlate : 25 possible sky positions to use as objects from a possible 585. plFiberPlate : 69 possible sky positions to use as objects from a possible 584. plFiberPlate : 83 possible sky positions to use as objects from a possible 583. plFiberPlate : 63 possible sky positions to use as objects from a possible 582. plFiberPlate : 43 possible sky positions to use as objects from a possible 581. plFiberPlate : 33 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 34 possible sky positions to use as objects from a possible 578. plFiberPlate : 26 possible sky positions to use as objects from a possible 577. plFiberPlate : 30 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 90 possible sky positions to use as objects from a possible 574. plFiberPlate : 80 possible sky positions to use as objects from a possible 573. plFiberPlate : 38 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 17 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 7 possible sky positions to use as objects from a possible 568. plFiberPlate : 21 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 51 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 7 possible sky positions to use as objects from a possible 562. plFiberPlate : 24 possible sky positions to use as objects from a possible 561. plFiberPlate : 14 possible sky positions to use as objects from a possible 560. plFiberPlate : 16 possible sky positions to use as objects from a possible 559. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0784.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0785.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0785.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0786.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 116 2 15 100 3 11 89 4 15 115 5 24 123 6 16 95 7 15 99 8 12 110 9 16 97 10 27 146 11 19 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 274 27 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 125 31 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 274 38 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 125 65 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 140 9 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 127 55 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 135 13 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 267 79 plFiberPlate : 120 possible sky positions to use as objects from a possible 601. plFiberPlate : 76 possible sky positions to use as objects from a possible 600. plFiberPlate : 29 possible sky positions to use as objects from a possible 599. plFiberPlate : 21 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 46 possible sky positions to use as objects from a possible 596. plFiberPlate : 36 possible sky positions to use as objects from a possible 595. plFiberPlate : 64 possible sky positions to use as objects from a possible 594. plFiberPlate : 50 possible sky positions to use as objects from a possible 593. plFiberPlate : 27 possible sky positions to use as objects from a possible 592. plFiberPlate : 9 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 9 possible sky positions to use as objects from a possible 589. plFiberPlate : 24 possible sky positions to use as objects from a possible 588. plFiberPlate : 8 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 68 possible sky positions to use as objects from a possible 585. plFiberPlate : 32 possible sky positions to use as objects from a possible 584. plFiberPlate : 25 possible sky positions to use as objects from a possible 583. plFiberPlate : 6 possible sky positions to use as objects from a possible 582. plFiberPlate : 6 possible sky positions to use as objects from a possible 581. plFiberPlate : 16 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : 17 possible sky positions to use as objects from a possible 577. plFiberPlate : 60 possible sky positions to use as objects from a possible 576. plFiberPlate : 43 possible sky positions to use as objects from a possible 575. plFiberPlate : 30 possible sky positions to use as objects from a possible 574. plFiberPlate : 18 possible sky positions to use as objects from a possible 573. plFiberPlate : 7 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 21 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0785.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0786.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0786.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0787.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 120 2 19 76 3 9 72 4 16 107 5 13 132 6 11 107 7 13 94 8 7 106 9 12 106 10 23 138 11 19 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 284 8 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 282 18 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 280 6 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 154 24 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 154 18 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 274 38 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 140 9 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 267 79 plFiberPlate : 111 possible sky positions to use as objects from a possible 610. plFiberPlate : 57 possible sky positions to use as objects from a possible 609. plFiberPlate : 30 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : 26 possible sky positions to use as objects from a possible 606. plFiberPlate : 37 possible sky positions to use as objects from a possible 605. plFiberPlate : 45 possible sky positions to use as objects from a possible 604. plFiberPlate : 109 possible sky positions to use as objects from a possible 603. plFiberPlate : 80 possible sky positions to use as objects from a possible 602. plFiberPlate : 48 possible sky positions to use as objects from a possible 601. plFiberPlate : 34 possible sky positions to use as objects from a possible 600. plFiberPlate : 8 possible sky positions to use as objects from a possible 599. plFiberPlate : 19 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 15 possible sky positions to use as objects from a possible 596. plFiberPlate : 29 possible sky positions to use as objects from a possible 595. plFiberPlate : 68 possible sky positions to use as objects from a possible 594. plFiberPlate : 77 possible sky positions to use as objects from a possible 593. plFiberPlate : 44 possible sky positions to use as objects from a possible 592. plFiberPlate : 27 possible sky positions to use as objects from a possible 591. plFiberPlate : 10 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 71 possible sky positions to use as objects from a possible 585. plFiberPlate : 29 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 23 possible sky positions to use as objects from a possible 581. plFiberPlate : 19 possible sky positions to use as objects from a possible 580. plFiberPlate : 19 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0786.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0787.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0787.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0788.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 114 2 14 86 3 6 66 4 15 111 5 19 142 6 10 107 7 18 93 8 24 100 9 10 111 10 19 148 11 15 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 291 86 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 282 28 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 293 11 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 166 44 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 288 15 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 154 18 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 293 33 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 292 8 plFiberPlate : 103 possible sky positions to use as objects from a possible 590. plFiberPlate : 63 possible sky positions to use as objects from a possible 589. plFiberPlate : 23 possible sky positions to use as objects from a possible 588. plFiberPlate : 21 possible sky positions to use as objects from a possible 587. plFiberPlate : 27 possible sky positions to use as objects from a possible 586. plFiberPlate : 35 possible sky positions to use as objects from a possible 585. plFiberPlate : 54 possible sky positions to use as objects from a possible 584. plFiberPlate : 85 possible sky positions to use as objects from a possible 583. plFiberPlate : 57 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 12 possible sky positions to use as objects from a possible 577. plFiberPlate : 27 possible sky positions to use as objects from a possible 576. plFiberPlate : 24 possible sky positions to use as objects from a possible 575. plFiberPlate : 90 possible sky positions to use as objects from a possible 574. plFiberPlate : 71 possible sky positions to use as objects from a possible 573. plFiberPlate : 34 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 10 possible sky positions to use as objects from a possible 570. plFiberPlate : 5 possible sky positions to use as objects from a possible 569. plFiberPlate : 9 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 21 possible sky positions to use as objects from a possible 566. plFiberPlate : 54 possible sky positions to use as objects from a possible 565. plFiberPlate : 44 possible sky positions to use as objects from a possible 564. plFiberPlate : 14 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : 25 possible sky positions to use as objects from a possible 559. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0787.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0788.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0788.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0789.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 118 2 9 97 3 9 80 4 15 97 5 16 130 6 14 102 7 13 100 8 13 109 9 15 119 10 18 159 11 12 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 303 49 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 174 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 293 11 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 302 11 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 166 44 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 293 33 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 176 25 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 292 8 plFiberPlate : 99 possible sky positions to use as objects from a possible 601. plFiberPlate : 86 possible sky positions to use as objects from a possible 600. plFiberPlate : 34 possible sky positions to use as objects from a possible 599. plFiberPlate : 47 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 27 possible sky positions to use as objects from a possible 596. plFiberPlate : 38 possible sky positions to use as objects from a possible 595. plFiberPlate : 79 possible sky positions to use as objects from a possible 594. plFiberPlate : 58 possible sky positions to use as objects from a possible 593. plFiberPlate : 53 possible sky positions to use as objects from a possible 592. plFiberPlate : 41 possible sky positions to use as objects from a possible 591. plFiberPlate : 27 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 77 possible sky positions to use as objects from a possible 585. plFiberPlate : 60 possible sky positions to use as objects from a possible 584. plFiberPlate : 37 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 20 possible sky positions to use as objects from a possible 581. plFiberPlate : 19 possible sky positions to use as objects from a possible 580. plFiberPlate : 13 possible sky positions to use as objects from a possible 579. plFiberPlate : 20 possible sky positions to use as objects from a possible 578. plFiberPlate : 9 possible sky positions to use as objects from a possible 577. plFiberPlate : 79 possible sky positions to use as objects from a possible 576. plFiberPlate : 55 possible sky positions to use as objects from a possible 575. plFiberPlate : 26 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 23 possible sky positions to use as objects from a possible 571. plFiberPlate : 12 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0788.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0789.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0789.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0790.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 130 2 14 80 3 8 52 4 12 87 5 19 132 6 11 97 7 8 102 8 14 109 9 18 100 10 23 137 11 16 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 318 74 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 321 17 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 312 11 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 181 52 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 311 14 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 174 31 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 321 20 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 176 25 plFiberPlate : 78 possible sky positions to use as objects from a possible 586. plFiberPlate : 64 possible sky positions to use as objects from a possible 585. plFiberPlate : 42 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 24 possible sky positions to use as objects from a possible 582. plFiberPlate : 44 possible sky positions to use as objects from a possible 581. plFiberPlate : 64 possible sky positions to use as objects from a possible 580. plFiberPlate : 83 possible sky positions to use as objects from a possible 579. plFiberPlate : 62 possible sky positions to use as objects from a possible 578. plFiberPlate : 42 possible sky positions to use as objects from a possible 577. plFiberPlate : 29 possible sky positions to use as objects from a possible 576. plFiberPlate : 18 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 33 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 48 possible sky positions to use as objects from a possible 571. plFiberPlate : 95 possible sky positions to use as objects from a possible 570. plFiberPlate : 49 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 3 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 20 possible sky positions to use as objects from a possible 564. plFiberPlate : 23 possible sky positions to use as objects from a possible 563. plFiberPlate : 14 possible sky positions to use as objects from a possible 562. plFiberPlate : 62 possible sky positions to use as objects from a possible 561. plFiberPlate : 49 possible sky positions to use as objects from a possible 560. plFiberPlate : 22 possible sky positions to use as objects from a possible 559. plFiberPlate : 20 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 17 possible sky positions to use as objects from a possible 556. plFiberPlate : 23 possible sky positions to use as objects from a possible 555. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0789.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0790.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0790.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0791.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 119 2 19 83 3 9 56 4 11 93 5 23 129 6 17 112 7 15 103 8 21 112 9 18 116 10 26 138 11 27 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 191 7 plFiberPlate : adding spectro-photo std with objId = 2304 0 1 318 74 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 326 2 plFiberPlate : adding spectro-photo std with objId = 2304 0 4 321 17 plFiberPlate : adding spectro-photo std with objId = 2304 0 6 318 7 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 199 36 plFiberPlate : adding spectro-photo std with objId = 2304 0 3 321 20 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 196 12 plFiberPlate : 81 possible sky positions to use as objects from a possible 580. plFiberPlate : 34 possible sky positions to use as objects from a possible 579. plFiberPlate : 24 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 35 possible sky positions to use as objects from a possible 575. plFiberPlate : 53 possible sky positions to use as objects from a possible 574. plFiberPlate : 70 possible sky positions to use as objects from a possible 573. plFiberPlate : 54 possible sky positions to use as objects from a possible 572. plFiberPlate : 41 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : 13 possible sky positions to use as objects from a possible 568. plFiberPlate : 14 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 30 possible sky positions to use as objects from a possible 565. plFiberPlate : 58 possible sky positions to use as objects from a possible 564. plFiberPlate : 36 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 9 possible sky positions to use as objects from a possible 560. plFiberPlate : 3 possible sky positions to use as objects from a possible 559. plFiberPlate : 6 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 22 possible sky positions to use as objects from a possible 556. plFiberPlate : 79 possible sky positions to use as objects from a possible 555. plFiberPlate : 67 possible sky positions to use as objects from a possible 554. plFiberPlate : 60 possible sky positions to use as objects from a possible 553. plFiberPlate : 27 possible sky positions to use as objects from a possible 552. plFiberPlate : 18 possible sky positions to use as objects from a possible 551. plFiberPlate : 16 possible sky positions to use as objects from a possible 550. plFiberPlate : 31 possible sky positions to use as objects from a possible 549. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0790.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0791.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0791.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0792.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 109 2 20 83 3 11 73 4 17 93 5 33 130 6 27 109 7 21 97 8 22 103 9 25 114 10 33 150 11 29 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 199 129 plFiberPlate : adding spectro-photo std with objId = 2304 0 5 334 29 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 212 6 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 206 27 plFiberPlate : adding spectro-photo std with objId = 2299 0 5 199 23 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 199 36 plFiberPlate : adding spectro-photo std with objId = 2304 0 2 338 8 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 214 13 plFiberPlate : 96 possible sky positions to use as objects from a possible 585. plFiberPlate : 68 possible sky positions to use as objects from a possible 584. plFiberPlate : 41 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 30 possible sky positions to use as objects from a possible 581. plFiberPlate : 28 possible sky positions to use as objects from a possible 580. plFiberPlate : 47 possible sky positions to use as objects from a possible 579. plFiberPlate : 88 possible sky positions to use as objects from a possible 578. plFiberPlate : 73 possible sky positions to use as objects from a possible 577. plFiberPlate : 62 possible sky positions to use as objects from a possible 576. plFiberPlate : 46 possible sky positions to use as objects from a possible 575. plFiberPlate : 25 possible sky positions to use as objects from a possible 574. plFiberPlate : 23 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 29 possible sky positions to use as objects from a possible 571. plFiberPlate : 25 possible sky positions to use as objects from a possible 570. plFiberPlate : 54 possible sky positions to use as objects from a possible 569. plFiberPlate : 35 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 5 possible sky positions to use as objects from a possible 566. plFiberPlate : 9 possible sky positions to use as objects from a possible 565. plFiberPlate : 12 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 7 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 88 possible sky positions to use as objects from a possible 560. plFiberPlate : 77 possible sky positions to use as objects from a possible 559. plFiberPlate : 34 possible sky positions to use as objects from a possible 558. plFiberPlate : 22 possible sky positions to use as objects from a possible 557. plFiberPlate : 25 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 46 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0791.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0792.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0792.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0793.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 125 2 19 94 3 11 54 4 9 82 5 35 124 6 30 97 7 25 102 8 28 105 9 29 107 10 20 140 11 17 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 217 17 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 209 80 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 220 22 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 226 48 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 216 10 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 222 35 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 225 41 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 214 13 plFiberPlate : 73 possible sky positions to use as objects from a possible 558. plFiberPlate : 41 possible sky positions to use as objects from a possible 557. plFiberPlate : 25 possible sky positions to use as objects from a possible 556. plFiberPlate : 36 possible sky positions to use as objects from a possible 555. plFiberPlate : 18 possible sky positions to use as objects from a possible 554. plFiberPlate : 24 possible sky positions to use as objects from a possible 553. plFiberPlate : 76 possible sky positions to use as objects from a possible 552. plFiberPlate : 66 possible sky positions to use as objects from a possible 551. plFiberPlate : 44 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 6 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 9 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 23 possible sky positions to use as objects from a possible 543. plFiberPlate : 81 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 26 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 8 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 9 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 5 possible sky positions to use as objects from a possible 534. plFiberPlate : 56 possible sky positions to use as objects from a possible 533. plFiberPlate : 56 possible sky positions to use as objects from a possible 532. plFiberPlate : 34 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : 23 possible sky positions to use as objects from a possible 529. plFiberPlate : 6 possible sky positions to use as objects from a possible 528. plFiberPlate : 27 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0792.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0793.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0793.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0794.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 104 2 15 85 3 11 60 4 10 73 5 23 121 6 17 103 7 12 89 8 13 108 9 23 104 10 28 133 11 20 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 3 227 23 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 228 58 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 234 30 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 237 51 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 225 41 plFiberPlate : adding spectro-photo std with objId = 2299 0 3 222 30 plFiberPlate : adding spectro-photo std with objId = 2299 0 6 221 24 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 226 31 plFiberPlate : 67 possible sky positions to use as objects from a possible 532. plFiberPlate : 28 possible sky positions to use as objects from a possible 531. plFiberPlate : 27 possible sky positions to use as objects from a possible 530. plFiberPlate : 14 possible sky positions to use as objects from a possible 529. plFiberPlate : 41 possible sky positions to use as objects from a possible 528. plFiberPlate : 24 possible sky positions to use as objects from a possible 527. plFiberPlate : 18 possible sky positions to use as objects from a possible 526. plFiberPlate : 49 possible sky positions to use as objects from a possible 525. plFiberPlate : 34 possible sky positions to use as objects from a possible 524. plFiberPlate : 21 possible sky positions to use as objects from a possible 523. plFiberPlate : 14 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : 10 possible sky positions to use as objects from a possible 519. plFiberPlate : 12 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 61 possible sky positions to use as objects from a possible 516. plFiberPlate : 35 possible sky positions to use as objects from a possible 515. plFiberPlate : 18 possible sky positions to use as objects from a possible 514. plFiberPlate : 11 possible sky positions to use as objects from a possible 513. plFiberPlate : 7 possible sky positions to use as objects from a possible 512. plFiberPlate : 10 possible sky positions to use as objects from a possible 511. plFiberPlate : 23 possible sky positions to use as objects from a possible 510. plFiberPlate : 12 possible sky positions to use as objects from a possible 509. plFiberPlate : 9 possible sky positions to use as objects from a possible 508. plFiberPlate : 65 possible sky positions to use as objects from a possible 507. plFiberPlate : 45 possible sky positions to use as objects from a possible 506. plFiberPlate : 17 possible sky positions to use as objects from a possible 505. plFiberPlate : 8 possible sky positions to use as objects from a possible 504. plFiberPlate : 16 possible sky positions to use as objects from a possible 503. plFiberPlate : 13 possible sky positions to use as objects from a possible 502. plFiberPlate : 23 possible sky positions to use as objects from a possible 501. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0793.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0794.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0794.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0795.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 114 2 12 93 3 17 61 4 25 81 5 22 114 6 19 92 7 25 83 8 20 103 9 17 97 10 34 153 11 26 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 243 11 plFiberPlate : adding spectro-photo std with objId = 2326 0 1 253 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 4 247 41 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 241 19 plFiberPlate : adding spectro-photo std with objId = 2299 0 4 237 31 plFiberPlate : adding spectro-photo std with objId = 2299 0 5 244 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 4 241 9 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 244 48 plFiberPlate : 87 possible sky positions to use as objects from a possible 545. plFiberPlate : 45 possible sky positions to use as objects from a possible 544. plFiberPlate : 19 possible sky positions to use as objects from a possible 543. plFiberPlate : 47 possible sky positions to use as objects from a possible 542. plFiberPlate : 31 possible sky positions to use as objects from a possible 541. plFiberPlate : 26 possible sky positions to use as objects from a possible 540. plFiberPlate : 45 possible sky positions to use as objects from a possible 539. plFiberPlate : 59 possible sky positions to use as objects from a possible 538. plFiberPlate : 49 possible sky positions to use as objects from a possible 537. plFiberPlate : 43 possible sky positions to use as objects from a possible 536. plFiberPlate : 19 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 6 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : 63 possible sky positions to use as objects from a possible 529. plFiberPlate : 52 possible sky positions to use as objects from a possible 528. plFiberPlate : 27 possible sky positions to use as objects from a possible 527. plFiberPlate : 11 possible sky positions to use as objects from a possible 526. plFiberPlate : 1 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 10 possible sky positions to use as objects from a possible 523. plFiberPlate : 20 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 58 possible sky positions to use as objects from a possible 520. plFiberPlate : 30 possible sky positions to use as objects from a possible 519. plFiberPlate : 28 possible sky positions to use as objects from a possible 518. plFiberPlate : 11 possible sky positions to use as objects from a possible 517. plFiberPlate : 8 possible sky positions to use as objects from a possible 516. plFiberPlate : 14 possible sky positions to use as objects from a possible 515. plFiberPlate : 27 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0794.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0795.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0795.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.3/plPlugMapP-0796.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 126 2 17 93 3 9 56 4 17 70 5 26 135 6 21 93 7 18 78 8 21 94 9 20 110 10 21 151 11 21 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 3 248 15 plFiberPlate : adding spectro-photo std with objId = 2299 0 1 248 54 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 253 25 plFiberPlate : adding spectro-photo std with objId = 2299 0 2 245 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 4 256 13 plFiberPlate : adding spectro-photo std with objId = 2299 0 1 252 23 plFiberPlate : adding spectro-photo std with objId = 2299 0 4 261 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 258 80 plFiberPlate : 77 possible sky positions to use as objects from a possible 556. plFiberPlate : 56 possible sky positions to use as objects from a possible 555. plFiberPlate : 36 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 24 possible sky positions to use as objects from a possible 552. plFiberPlate : 33 possible sky positions to use as objects from a possible 551. plFiberPlate : 56 possible sky positions to use as objects from a possible 550. plFiberPlate : 54 possible sky positions to use as objects from a possible 549. plFiberPlate : 45 possible sky positions to use as objects from a possible 548. plFiberPlate : 17 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 5 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 7 possible sky positions to use as objects from a possible 541. plFiberPlate : 77 possible sky positions to use as objects from a possible 540. plFiberPlate : 51 possible sky positions to use as objects from a possible 539. plFiberPlate : 36 possible sky positions to use as objects from a possible 538. plFiberPlate : 21 possible sky positions to use as objects from a possible 537. plFiberPlate : 22 possible sky positions to use as objects from a possible 536. plFiberPlate : 2 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : 50 possible sky positions to use as objects from a possible 531. plFiberPlate : 47 possible sky positions to use as objects from a possible 530. plFiberPlate : 22 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 6 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 23 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0795.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0796.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.3/plOverlay-0796.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Nov 26 13:45:29 CST 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 23 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0774.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0774.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0774.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0775.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0775.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0775.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0776.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0776.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0776.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0777.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0777.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0777.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0778.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0778.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0778.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0779.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0779.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0779.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0780.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2800,5.8319) and (11.83,4.69) plMakeFanucCodes : fixed path between (11.8319,4.6945) and (12.22,3.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0780.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0780.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0781.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6166,10.7487) and (-5.12,11.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0781.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0781.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0782.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.0619,10.9872) and (-2.56,12.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0782.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0782.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0783.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1188,3.9768) and (12.31,2.96) plMakeFanucCodes : fixed path between (5.3864,-10.8707) and (3.63,-12.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0783.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0783.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0784.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0784.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0784.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0785.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6802,10.8398) and (-2.80,12.43) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0785.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0785.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0786.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0786.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0786.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0787.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0787.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0787.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0788.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0788.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0788.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0789.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0789.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0789.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0790.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3159,-5.5177) and (11.97,-3.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0790.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0790.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0791.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0791.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0791.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0792.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.2364,10.5119) and (6.03,11.06) plMakeFanucCodes : fixed path between (12.3801,-2.9108) and (12.63,-0.86) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0792.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0792.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0793.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8316,-4.8347) and (11.99,-4.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0793.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0793.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0794.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7585,6.6764) and (11.48,5.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0794.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0794.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0795.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.1312,-10.7960) and (3.56,-12.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0795.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0795.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0796.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.9499,10.5577) and (5.41,11.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0796.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.3/plFanuc-0796.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Nov 26 13:46:37 CST 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e138e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 23 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 774 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 775 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 776 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 777 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 778 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 779 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 780 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 781 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 782 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 783 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 784 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 785 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 786 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 787 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 788 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 789 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 790 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 791 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 792 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 793 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 794 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 795 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 796 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Nov 26 13:47:12 CST 2001 Begin running plateEnder dr2001.11.3 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Mon Nov 26 13:48:38 CST 2001 ALL DONE PS: Read file for stderr output of this job.