Sender: LSF System Subject: Job 26742: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Apr 4 08:58:42 2001 Results reported at Wed Apr 4 09:02:14 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /usr/local/etc/fermi.shrc ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v8_11 -f OSF1 -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 183.71 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Apr 4 08:58:44 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Apr 4 08:58:47 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_4:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/p/OSF1/ups/v4_4a/bin:/p/OSF1/emacs/v19_30a/bin:/p/OSF1/sdsscvs/v1_4/bin:/p/OSF1/rcs/v5_6/bin:/p/OSF1/diff/v1_0/bin:/p/OSF1/cvs/v1_10/bin:/home/s1/bgreen/bin:/usr/sbin:/usr/ccs/bin:/bin:/usr/bin:/usr/lbin:/usr/ucb:/etc:/usr/bin/X11:/usr/local/bin:.:/p/OSF1/ssc/v4_6/bin:/p/OSF1/astrom/v3_3/bin:/p/OSF1/photo/v5_2_17/bin:/p/OSF1/mt/v7_2/bin:/p/OSF1/ghostview/v4_0b/bin:/p/OSF1/dp/v8_11/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_10/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/dervish/v7_15/bin:/p/OSF1/sdssmath/v5_0/bin:/p/OSF1/astrotools/v5_2/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Wed Apr 4 08:58:47 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_3 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_2 CVS_DIR=/p/OSF1/cvs/v1_10 DERVISH_DIR=/p/OSF1/dervish/v7_15 DIFF_DIR=/p/OSF1/diff/v1_0 DP_DIR=/p/OSF1/dp/v8_11 EMACS_DIR=/p/OSF1/emacs/v19_30a ENCP_DIR=/p/OSF1/encp/v2_4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v7_15/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_1 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_2 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_7_8 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_17 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 RCS_DIR=/p/OSF1/rcs/v5_6 SDSSCVS_DIR=/p/OSF1/sdsscvs/v1_4 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_0 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_10 SETUPS_DIR=/usr/local/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_6 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/data/dp3.b/data/ucac/v0_7 UPS_DIR=/p/OSF1/ups/v4_4a --------------------------------------------------------------- Wed Apr 4 08:58:47 CDT 2001 Begin running plate --------------------------------------------------------------- Wed Apr 4 08:58:47 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v8_11/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v8_11 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140db5568 makePlates : beginning loop over plObs chain; makePlates : making 20 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0353.par makePlates : plateInfo struct for plate 562 : (h2).mjd 52301 (h2).raCen 125.2086 (h2).decCen 2.447401 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.209 2.447 125.209 3.947 plMakePlateFromTile : mjd of obs : 52301.646314 Observed HA/dec of plate center, fiducial point (deg) : -20.002 2.451 -20.003 3.951 The rotation angle of the fid. point is 29.568999 plMakePlateFromTile : beginning loop over 949 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0354.par makePlates : plateInfo struct for plate 563 : (h2).mjd 52301 (h2).raCen 128.198 (h2).decCen 2.684894 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.198 2.685 128.198 4.185 plMakePlateFromTile : mjd of obs : 52301.646282 Observed HA/dec of plate center, fiducial point (deg) : -23.002 2.688 -23.003 4.188 The rotation angle of the fid. point is 33.084237 plMakePlateFromTile : beginning loop over 1005 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0355.par makePlates : plateInfo struct for plate 564 : (h2).mjd 52301 (h2).raCen 131.1937 (h2).decCen 2.909792 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.194 2.910 131.194 4.410 plMakePlateFromTile : mjd of obs : 52301.646267 Observed HA/dec of plate center, fiducial point (deg) : -26.002 2.913 -26.003 4.412 The rotation angle of the fid. point is 36.283517 plMakePlateFromTile : beginning loop over 1233 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0356.par makePlates : plateInfo struct for plate 565 : (h2).mjd 52301 (h2).raCen 134.0611 (h2).decCen 2.974602 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.061 2.975 134.061 4.475 plMakePlateFromTile : mjd of obs : 52301.645897 Observed HA/dec of plate center, fiducial point (deg) : -29.002 2.978 -29.003 4.477 The rotation angle of the fid. point is 39.063324 plMakePlateFromTile : beginning loop over 1310 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0357.par makePlates : plateInfo struct for plate 566 : (h2).mjd 52301 (h2).raCen 136.7271 (h2).decCen 3.208784 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.727 3.209 136.727 4.709 plMakePlateFromTile : mjd of obs : 52301.689307 Observed HA/dec of plate center, fiducial point (deg) : -16.002 3.210 -16.003 4.710 The rotation angle of the fid. point is 25.086999 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-15.45, -84.86, 8.5) and (-14.79, -84.89, 8.4) checkLTHo : distance = 0.652, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-15.45, -84.86, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0358.par makePlates : plateInfo struct for plate 567 : (h2).mjd 52301 (h2).raCen 139.1328 (h2).decCen 3.312311 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.133 3.312 139.133 4.812 plMakePlateFromTile : mjd of obs : 52301.687658 Observed HA/dec of plate center, fiducial point (deg) : -19.002 3.314 -19.003 4.813 The rotation angle of the fid. point is 28.976157 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0359.par makePlates : plateInfo struct for plate 568 : (h2).mjd 52301 (h2).raCen 141.5264 (h2).decCen 3.494527 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.526 3.495 141.526 4.995 plMakePlateFromTile : mjd of obs : 52301.688746 Observed HA/dec of plate center, fiducial point (deg) : -21.002 3.496 -21.003 4.995 The rotation angle of the fid. point is 31.467640 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-155.42, 2.39, 8.3) and (-154.34, 1.52, 7.3) checkLTHo : distance = 1.391, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-155.42, 2.39, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0360.par makePlates : plateInfo struct for plate 569 : (h2).mjd 52301 (h2).raCen 143.7261 (h2).decCen 3.576293 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.726 3.576 143.726 5.076 plMakePlateFromTile : mjd of obs : 52301.689297 Observed HA/dec of plate center, fiducial point (deg) : -23.002 3.577 -23.003 5.077 The rotation angle of the fid. point is 33.740062 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0361.par makePlates : plateInfo struct for plate 570 : (h2).mjd 52301 (h2).raCen 145.8622 (h2).decCen 3.779889 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.862 3.780 145.862 5.280 plMakePlateFromTile : mjd of obs : 52301.689672 Observed HA/dec of plate center, fiducial point (deg) : -25.002 3.781 -25.003 5.280 The rotation angle of the fid. point is 35.960465 plMakePlateFromTile : beginning loop over 1310 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0362.par makePlates : plateInfo struct for plate 571 : (h2).mjd 52301 (h2).raCen 147.8906 (h2).decCen 3.883403 (h2).haCen -12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.891 3.883 147.891 5.383 plMakePlateFromTile : mjd of obs : 52301.731315 Observed HA/dec of plate center, fiducial point (deg) : -12.002 3.883 -12.003 5.383 The rotation angle of the fid. point is 19.851018 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0363.par makePlates : plateInfo struct for plate 572 : (h2).mjd 52301 (h2).raCen 149.8767 (h2).decCen 3.922344 (h2).haCen -14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.877 3.922 149.877 5.422 plMakePlateFromTile : mjd of obs : 52301.731275 Observed HA/dec of plate center, fiducial point (deg) : -14.002 3.922 -14.003 5.421 The rotation angle of the fid. point is 22.790541 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0364.par makePlates : plateInfo struct for plate 573 : (h2).mjd 52301 (h2).raCen 151.7823 (h2).decCen 4.016796 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.782 4.017 151.782 5.517 plMakePlateFromTile : mjd of obs : 52301.731011 Observed HA/dec of plate center, fiducial point (deg) : -16.002 4.016 -16.003 5.516 The rotation angle of the fid. point is 25.620493 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0365.par makePlates : plateInfo struct for plate 574 : (h2).mjd 52301 (h2).raCen 153.8137 (h2).decCen 4.141604 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 153.814 4.142 153.814 5.642 plMakePlateFromTile : mjd of obs : 52301.731096 Observed HA/dec of plate center, fiducial point (deg) : -18.002 4.141 -18.003 5.640 The rotation angle of the fid. point is 28.323381 plMakePlateFromTile : beginning loop over 1289 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0366.par makePlates : plateInfo struct for plate 575 : (h2).mjd 52301 (h2).raCen 155.5827 (h2).decCen 4.157355 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.583 4.157 155.583 5.657 plMakePlateFromTile : mjd of obs : 52301.810813 Observed HA/dec of plate center, fiducial point (deg) : 8.998 4.156 8.998 5.656 The rotation angle of the fid. point is -15.322059 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0367.par makePlates : plateInfo struct for plate 576 : (h2).mjd 52301 (h2).raCen 157.4442 (h2).decCen 4.352073 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.444 4.352 157.444 5.852 plMakePlateFromTile : mjd of obs : 52301.810428 Observed HA/dec of plate center, fiducial point (deg) : 6.998 4.351 6.998 5.850 The rotation angle of the fid. point is -12.126996 plMakePlateFromTile : beginning loop over 1328 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0368.par makePlates : plateInfo struct for plate 577 : (h2).mjd 52301 (h2).raCen 159.266 (h2).decCen 4.34661 (h2).haCen 5 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.266 4.347 159.266 5.847 plMakePlateFromTile : mjd of obs : 52301.809932 Observed HA/dec of plate center, fiducial point (deg) : 4.998 4.345 4.998 5.844 The rotation angle of the fid. point is -8.736801 plMakePlateFromTile : beginning loop over 1353 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (89.83, 302.63, 8.0) and (89.83, 302.54, 7.6) checkLTHo : distance = 0.092, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(89.83, 302.63, 8.0) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0369.par makePlates : plateInfo struct for plate 578 : (h2).mjd 52301 (h2).raCen 161.0525 (h2).decCen 4.427386 (h2).haCen 3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.053 4.427 161.053 5.927 plMakePlateFromTile : mjd of obs : 52301.809339 Observed HA/dec of plate center, fiducial point (deg) : 2.998 4.426 2.998 5.925 The rotation angle of the fid. point is -5.284805 plMakePlateFromTile : beginning loop over 1353 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-46.93, 69.44, 7.2) and (-46.71, 69.64, 6.2) checkLTHo : distance = 0.298, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-46.93, 69.44, 7.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0370.par makePlates : plateInfo struct for plate 579 : (h2).mjd 52301 (h2).raCen 162.8816 (h2).decCen 4.478768 (h2).haCen 17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.882 4.479 162.882 5.979 plMakePlateFromTile : mjd of obs : 52301.853200 Observed HA/dec of plate center, fiducial point (deg) : 16.998 4.477 16.998 5.977 The rotation angle of the fid. point is -27.259550 plMakePlateFromTile : beginning loop over 1361 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0371.par makePlates : plateInfo struct for plate 580 : (h2).mjd 52301 (h2).raCen 164.7745 (h2).decCen 4.58961 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 164.774 4.590 164.774 6.090 plMakePlateFromTile : mjd of obs : 52301.852901 Observed HA/dec of plate center, fiducial point (deg) : 14.998 4.588 14.998 6.087 The rotation angle of the fid. point is -24.621578 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0372.par makePlates : plateInfo struct for plate 581 : (h2).mjd 52301 (h2).raCen 166.9384 (h2).decCen 4.665245 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.938 4.665 166.938 6.165 plMakePlateFromTile : mjd of obs : 52301.894919 Observed HA/dec of plate center, fiducial point (deg) : 27.998 4.664 27.998 6.164 The rotation angle of the fid. point is -39.474288 plMakePlateFromTile : beginning loop over 1240 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Apr 4 08:59:43 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v8_11/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v8_11 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 20 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0562.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 53 2 2 4 3 2 7 4 24 42 5 26 50 6 1 11 7 3 12 8 19 51 9 11 38 10 21 46 11 12 40 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 52 13 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 49 30 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 37 63 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 38 61 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 45 35 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 33 202 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 49 63 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 36 31 plFiberPlate : 48 possible sky positions to use as objects from a possible 209. plFiberPlate : 38 possible sky positions to use as objects from a possible 208. plFiberPlate : 27 possible sky positions to use as objects from a possible 207. plFiberPlate : 14 possible sky positions to use as objects from a possible 206. plFiberPlate : 12 possible sky positions to use as objects from a possible 205. plFiberPlate : 25 possible sky positions to use as objects from a possible 204. plFiberPlate : 10 possible sky positions to use as objects from a possible 203. plFiberPlate : 25 possible sky positions to use as objects from a possible 202. plFiberPlate : 18 possible sky positions to use as objects from a possible 201. plFiberPlate : 13 possible sky positions to use as objects from a possible 200. plFiberPlate : 8 possible sky positions to use as objects from a possible 199. plFiberPlate : 2 possible sky positions to use as objects from a possible 198. plFiberPlate : 2 possible sky positions to use as objects from a possible 197. plFiberPlate : 12 possible sky positions to use as objects from a possible 196. plFiberPlate : 5 possible sky positions to use as objects from a possible 195. plFiberPlate : 2 possible sky positions to use as objects from a possible 194. plFiberPlate : 27 possible sky positions to use as objects from a possible 193. plFiberPlate : 19 possible sky positions to use as objects from a possible 192. plFiberPlate : 9 possible sky positions to use as objects from a possible 191. plFiberPlate : 5 possible sky positions to use as objects from a possible 190. plFiberPlate : 2 possible sky positions to use as objects from a possible 189. plFiberPlate : 11 possible sky positions to use as objects from a possible 188. plFiberPlate : 3 possible sky positions to use as objects from a possible 187. plFiberPlate : 0 possible sky positions to use as objects from a possible 186. plFiberPlate: No sky found for bundle at 256.667 53.886, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 186. plFiberPlate : 4 possible sky positions to use as objects from a possible 185. plFiberPlate : 17 possible sky positions to use as objects from a possible 184. plFiberPlate : 10 possible sky positions to use as objects from a possible 183. plFiberPlate : 9 possible sky positions to use as objects from a possible 182. plFiberPlate : 7 possible sky positions to use as objects from a possible 181. plFiberPlate : 3 possible sky positions to use as objects from a possible 180. plFiberPlate : 5 possible sky positions to use as objects from a possible 179. plFiberPlate : 5 possible sky positions to use as objects from a possible 178. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0562.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0562.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0563.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : adding sky number 155 to list of science objects plFiberPlate : adding sky number 273 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 201 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 141 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 23 to list of science objects plFiberPlate : adding sky number 109 to list of science objects plFiberPlate : adding sky number 77 to list of science objects plFiberPlate : adding sky number 103 to list of science objects plFiberPlate : adding sky number 274 to list of science objects plFiberPlate : adding sky number 148 to list of science objects plFiberPlate : adding sky number 212 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 210 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 41 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 93 to list of science objects plFiberPlate : adding sky number 245 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 106 to list of science objects plFiberPlate : adding sky number 160 to list of science objects plFiberPlate : adding sky number 207 to list of science objects plFiberPlate : adding sky number 244 to list of science objects plFiberPlate : adding sky number 227 to list of science objects plFiberPlate : adding sky number 226 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 210 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 245 to list of science objects plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 237 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 191 to list of science objects plFiberPlate : adding sky number 184 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 6 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 181 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 140 to list of science objects plFiberPlate : adding sky number 10 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 212 to list of science objects plFiberPlate : adding sky number 132 to list of science objects plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : adding sky number 130 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 63 2 11 18 3 4 11 4 24 37 5 22 52 6 6 7 7 6 22 8 26 65 9 18 38 10 30 48 11 26 41 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1907 0 5 44 145 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 54 258 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 70 69 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 56 57 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 57 161 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 63 49 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 56 28 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 61 99 plFiberPlate : 44 possible sky positions to use as objects from a possible 228. plFiberPlate : 39 possible sky positions to use as objects from a possible 227. plFiberPlate : 28 possible sky positions to use as objects from a possible 226. plFiberPlate : 18 possible sky positions to use as objects from a possible 225. plFiberPlate : 11 possible sky positions to use as objects from a possible 224. plFiberPlate : 12 possible sky positions to use as objects from a possible 223. plFiberPlate : 16 possible sky positions to use as objects from a possible 222. plFiberPlate : 27 possible sky positions to use as objects from a possible 221. plFiberPlate : 25 possible sky positions to use as objects from a possible 220. plFiberPlate : 16 possible sky positions to use as objects from a possible 219. plFiberPlate : 8 possible sky positions to use as objects from a possible 218. plFiberPlate : 8 possible sky positions to use as objects from a possible 217. plFiberPlate : 2 possible sky positions to use as objects from a possible 216. plFiberPlate : 9 possible sky positions to use as objects from a possible 215. plFiberPlate : 9 possible sky positions to use as objects from a possible 214. plFiberPlate : 7 possible sky positions to use as objects from a possible 213. plFiberPlate : 31 possible sky positions to use as objects from a possible 212. plFiberPlate : 32 possible sky positions to use as objects from a possible 211. plFiberPlate : 18 possible sky positions to use as objects from a possible 210. plFiberPlate : 7 possible sky positions to use as objects from a possible 209. plFiberPlate : 2 possible sky positions to use as objects from a possible 208. plFiberPlate : 3 possible sky positions to use as objects from a possible 207. plFiberPlate : 4 possible sky positions to use as objects from a possible 206. plFiberPlate : 10 possible sky positions to use as objects from a possible 205. plFiberPlate : 6 possible sky positions to use as objects from a possible 204. plFiberPlate : 17 possible sky positions to use as objects from a possible 203. plFiberPlate : 12 possible sky positions to use as objects from a possible 202. plFiberPlate : 5 possible sky positions to use as objects from a possible 201. plFiberPlate : 6 possible sky positions to use as objects from a possible 200. plFiberPlate : 8 possible sky positions to use as objects from a possible 199. plFiberPlate : 10 possible sky positions to use as objects from a possible 198. plFiberPlate : 12 possible sky positions to use as objects from a possible 197. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0562.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0563.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0563.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0564.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 40 104 2 30 101 3 40 91 4 42 94 5 28 67 6 10 15 7 10 18 8 25 52 9 26 53 10 54 134 11 40 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 47 85 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 39 84 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 85 80 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 90 52 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 77 143 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 91 30 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 89 61 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 76 10 plFiberPlate : 79 possible sky positions to use as objects from a possible 406. plFiberPlate : 69 possible sky positions to use as objects from a possible 405. plFiberPlate : 25 possible sky positions to use as objects from a possible 404. plFiberPlate : 23 possible sky positions to use as objects from a possible 403. plFiberPlate : 27 possible sky positions to use as objects from a possible 402. plFiberPlate : 35 possible sky positions to use as objects from a possible 401. plFiberPlate : 20 possible sky positions to use as objects from a possible 400. plFiberPlate : 39 possible sky positions to use as objects from a possible 399. plFiberPlate : 30 possible sky positions to use as objects from a possible 398. plFiberPlate : 19 possible sky positions to use as objects from a possible 397. plFiberPlate : 9 possible sky positions to use as objects from a possible 396. plFiberPlate : 9 possible sky positions to use as objects from a possible 395. plFiberPlate : 4 possible sky positions to use as objects from a possible 394. plFiberPlate : 1 possible sky positions to use as objects from a possible 393. plFiberPlate : 13 possible sky positions to use as objects from a possible 392. plFiberPlate : 12 possible sky positions to use as objects from a possible 391. plFiberPlate : 47 possible sky positions to use as objects from a possible 390. plFiberPlate : 30 possible sky positions to use as objects from a possible 389. plFiberPlate : 27 possible sky positions to use as objects from a possible 388. plFiberPlate : 12 possible sky positions to use as objects from a possible 387. plFiberPlate : 14 possible sky positions to use as objects from a possible 386. plFiberPlate : 5 possible sky positions to use as objects from a possible 385. plFiberPlate : 5 possible sky positions to use as objects from a possible 384. plFiberPlate : 6 possible sky positions to use as objects from a possible 383. plFiberPlate : 14 possible sky positions to use as objects from a possible 382. plFiberPlate : 19 possible sky positions to use as objects from a possible 381. plFiberPlate : 16 possible sky positions to use as objects from a possible 380. plFiberPlate : 6 possible sky positions to use as objects from a possible 379. plFiberPlate : 4 possible sky positions to use as objects from a possible 378. plFiberPlate : 7 possible sky positions to use as objects from a possible 377. plFiberPlate : 2 possible sky positions to use as objects from a possible 376. plFiberPlate : 7 possible sky positions to use as objects from a possible 375. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0563.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0564.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0564.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0565.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 120 2 32 110 3 27 97 4 41 107 5 38 84 6 13 39 7 12 42 8 21 77 9 19 77 10 51 152 11 33 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 99 97 plFiberPlate : adding spectro-photo std with objId = 1907 0 5 71 125 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 109 33 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 103 35 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 94 79 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 95 70 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 108 57 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 92 11 plFiberPlate : 90 possible sky positions to use as objects from a possible 489. plFiberPlate : 95 possible sky positions to use as objects from a possible 488. plFiberPlate : 68 possible sky positions to use as objects from a possible 487. plFiberPlate : 35 possible sky positions to use as objects from a possible 486. plFiberPlate : 69 possible sky positions to use as objects from a possible 485. plFiberPlate : 42 possible sky positions to use as objects from a possible 484. plFiberPlate : 19 possible sky positions to use as objects from a possible 483. plFiberPlate : 51 possible sky positions to use as objects from a possible 482. plFiberPlate : 40 possible sky positions to use as objects from a possible 481. plFiberPlate : 29 possible sky positions to use as objects from a possible 480. plFiberPlate : 6 possible sky positions to use as objects from a possible 479. plFiberPlate : 11 possible sky positions to use as objects from a possible 478. plFiberPlate : 9 possible sky positions to use as objects from a possible 477. plFiberPlate : 10 possible sky positions to use as objects from a possible 476. plFiberPlate : 9 possible sky positions to use as objects from a possible 475. plFiberPlate : 9 possible sky positions to use as objects from a possible 474. plFiberPlate : 39 possible sky positions to use as objects from a possible 473. plFiberPlate : 28 possible sky positions to use as objects from a possible 472. plFiberPlate : 18 possible sky positions to use as objects from a possible 471. plFiberPlate : 15 possible sky positions to use as objects from a possible 470. plFiberPlate : 12 possible sky positions to use as objects from a possible 469. plFiberPlate : 0 possible sky positions to use as objects from a possible 468. plFiberPlate: No sky found for bundle at 75.059 73.748, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 468. plFiberPlate : 6 possible sky positions to use as objects from a possible 467. plFiberPlate : 6 possible sky positions to use as objects from a possible 466. plFiberPlate : 14 possible sky positions to use as objects from a possible 465. plFiberPlate : 36 possible sky positions to use as objects from a possible 464. plFiberPlate : 20 possible sky positions to use as objects from a possible 463. plFiberPlate : 11 possible sky positions to use as objects from a possible 462. plFiberPlate : 9 possible sky positions to use as objects from a possible 461. plFiberPlate : 7 possible sky positions to use as objects from a possible 460. plFiberPlate : 8 possible sky positions to use as objects from a possible 459. plFiberPlate : 5 possible sky positions to use as objects from a possible 458. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0564.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0565.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0565.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0566.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 127 2 32 109 3 27 103 4 24 104 5 25 79 6 10 33 7 16 41 8 20 85 9 30 77 10 54 157 11 30 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 124 35 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 117 162 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 123 49 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 118 8 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 129 43 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 118 63 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 120 123 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 125 86 plFiberPlate : 87 possible sky positions to use as objects from a possible 496. plFiberPlate : 57 possible sky positions to use as objects from a possible 495. plFiberPlate : 41 possible sky positions to use as objects from a possible 494. plFiberPlate : 13 possible sky positions to use as objects from a possible 493. plFiberPlate : 34 possible sky positions to use as objects from a possible 492. plFiberPlate : 24 possible sky positions to use as objects from a possible 491. plFiberPlate : 47 possible sky positions to use as objects from a possible 490. plFiberPlate : 32 possible sky positions to use as objects from a possible 489. plFiberPlate : 29 possible sky positions to use as objects from a possible 488. plFiberPlate : 22 possible sky positions to use as objects from a possible 487. plFiberPlate : 6 possible sky positions to use as objects from a possible 486. plFiberPlate : 7 possible sky positions to use as objects from a possible 485. plFiberPlate : 5 possible sky positions to use as objects from a possible 484. plFiberPlate : 8 possible sky positions to use as objects from a possible 483. plFiberPlate : 8 possible sky positions to use as objects from a possible 482. plFiberPlate : 12 possible sky positions to use as objects from a possible 481. plFiberPlate : 36 possible sky positions to use as objects from a possible 480. plFiberPlate : 28 possible sky positions to use as objects from a possible 479. plFiberPlate : 25 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 13 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 8 possible sky positions to use as objects from a possible 474. plFiberPlate : 11 possible sky positions to use as objects from a possible 473. plFiberPlate : 13 possible sky positions to use as objects from a possible 472. plFiberPlate : 26 possible sky positions to use as objects from a possible 471. plFiberPlate : 21 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 1 possible sky positions to use as objects from a possible 468. plFiberPlate : 10 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 9 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0565.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0566.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0566.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0567.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 118 2 29 111 3 30 96 4 29 97 5 22 76 6 13 44 7 15 51 8 25 90 9 25 95 10 42 153 11 31 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 137 53 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 128 6 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 142 58 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 142 41 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 131 110 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 129 43 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 140 29 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 143 38 plFiberPlate : 115 possible sky positions to use as objects from a possible 511. plFiberPlate : 44 possible sky positions to use as objects from a possible 510. plFiberPlate : 30 possible sky positions to use as objects from a possible 509. plFiberPlate : 51 possible sky positions to use as objects from a possible 508. plFiberPlate : 50 possible sky positions to use as objects from a possible 507. plFiberPlate : 30 possible sky positions to use as objects from a possible 506. plFiberPlate : 35 possible sky positions to use as objects from a possible 505. plFiberPlate : 36 possible sky positions to use as objects from a possible 504. plFiberPlate : 27 possible sky positions to use as objects from a possible 503. plFiberPlate : 23 possible sky positions to use as objects from a possible 502. plFiberPlate : 17 possible sky positions to use as objects from a possible 501. plFiberPlate : 17 possible sky positions to use as objects from a possible 500. plFiberPlate : 10 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 12 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 54 possible sky positions to use as objects from a possible 495. plFiberPlate : 42 possible sky positions to use as objects from a possible 494. plFiberPlate : 32 possible sky positions to use as objects from a possible 493. plFiberPlate : 27 possible sky positions to use as objects from a possible 492. plFiberPlate : 18 possible sky positions to use as objects from a possible 491. plFiberPlate : 5 possible sky positions to use as objects from a possible 490. plFiberPlate : 12 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 21 possible sky positions to use as objects from a possible 487. plFiberPlate : 29 possible sky positions to use as objects from a possible 486. plFiberPlate : 15 possible sky positions to use as objects from a possible 485. plFiberPlate : 16 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 12 possible sky positions to use as objects from a possible 482. plFiberPlate : 13 possible sky positions to use as objects from a possible 481. plFiberPlate : 7 possible sky positions to use as objects from a possible 480. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0566.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0567.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0567.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0568.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 134 2 33 114 3 25 98 4 22 108 5 10 99 6 7 43 7 6 52 8 19 101 9 26 90 10 34 160 11 24 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 153 31 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 155 12 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 147 75 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 149 20 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 156 19 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 154 195 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 153 2 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 143 38 plFiberPlate : 96 possible sky positions to use as objects from a possible 550. plFiberPlate : 46 possible sky positions to use as objects from a possible 549. plFiberPlate : 52 possible sky positions to use as objects from a possible 548. plFiberPlate : 41 possible sky positions to use as objects from a possible 547. plFiberPlate : 24 possible sky positions to use as objects from a possible 546. plFiberPlate : 48 possible sky positions to use as objects from a possible 545. plFiberPlate : 41 possible sky positions to use as objects from a possible 544. plFiberPlate : 56 possible sky positions to use as objects from a possible 543. plFiberPlate : 34 possible sky positions to use as objects from a possible 542. plFiberPlate : 25 possible sky positions to use as objects from a possible 541. plFiberPlate : 18 possible sky positions to use as objects from a possible 540. plFiberPlate : 6 possible sky positions to use as objects from a possible 539. plFiberPlate : 1 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 32 possible sky positions to use as objects from a possible 535. plFiberPlate : 42 possible sky positions to use as objects from a possible 534. plFiberPlate : 32 possible sky positions to use as objects from a possible 533. plFiberPlate : 29 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 20 possible sky positions to use as objects from a possible 527. plFiberPlate : 4 possible sky positions to use as objects from a possible 526. plFiberPlate : 34 possible sky positions to use as objects from a possible 525. plFiberPlate : 28 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 5 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 7 possible sky positions to use as objects from a possible 520. plFiberPlate : 20 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0567.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0568.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0568.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0569.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 101 2 43 98 3 33 90 4 25 103 5 15 106 6 7 52 7 10 57 8 19 93 9 16 93 10 51 138 11 36 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 171 2 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 162 36 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 169 27 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 155 12 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 156 19 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 166 40 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 172 79 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 168 2 plFiberPlate : 117 possible sky positions to use as objects from a possible 516. plFiberPlate : 68 possible sky positions to use as objects from a possible 515. plFiberPlate : 39 possible sky positions to use as objects from a possible 514. plFiberPlate : 25 possible sky positions to use as objects from a possible 513. plFiberPlate : 21 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 44 possible sky positions to use as objects from a possible 510. plFiberPlate : 56 possible sky positions to use as objects from a possible 509. plFiberPlate : 42 possible sky positions to use as objects from a possible 508. plFiberPlate : 27 possible sky positions to use as objects from a possible 507. plFiberPlate : 11 possible sky positions to use as objects from a possible 506. plFiberPlate : 6 possible sky positions to use as objects from a possible 505. plFiberPlate : 10 possible sky positions to use as objects from a possible 504. plFiberPlate : 1 possible sky positions to use as objects from a possible 503. plFiberPlate : 23 possible sky positions to use as objects from a possible 502. plFiberPlate : 5 possible sky positions to use as objects from a possible 501. plFiberPlate : 70 possible sky positions to use as objects from a possible 500. plFiberPlate : 43 possible sky positions to use as objects from a possible 499. plFiberPlate : 23 possible sky positions to use as objects from a possible 498. plFiberPlate : 21 possible sky positions to use as objects from a possible 497. plFiberPlate : 8 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 6 possible sky positions to use as objects from a possible 494. plFiberPlate : 10 possible sky positions to use as objects from a possible 493. plFiberPlate : 24 possible sky positions to use as objects from a possible 492. plFiberPlate : 34 possible sky positions to use as objects from a possible 491. plFiberPlate : 16 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 8 possible sky positions to use as objects from a possible 488. plFiberPlate : 10 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 14 possible sky positions to use as objects from a possible 485. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0568.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0569.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0569.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0570.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 125 2 24 110 3 20 92 4 18 107 5 21 105 6 6 51 7 6 64 8 17 92 9 17 100 10 28 151 11 28 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1907 0 5 153 46 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 182 22 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 169 27 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 179 45 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 187 9 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 187 37 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 172 79 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 186 63 plFiberPlate : 106 possible sky positions to use as objects from a possible 557. plFiberPlate : 101 possible sky positions to use as objects from a possible 556. plFiberPlate : 57 possible sky positions to use as objects from a possible 555. plFiberPlate : 22 possible sky positions to use as objects from a possible 554. plFiberPlate : 37 possible sky positions to use as objects from a possible 553. plFiberPlate : 32 possible sky positions to use as objects from a possible 552. plFiberPlate : 49 possible sky positions to use as objects from a possible 551. plFiberPlate : 51 possible sky positions to use as objects from a possible 550. plFiberPlate : 35 possible sky positions to use as objects from a possible 549. plFiberPlate : 22 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 6 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 10 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 77 possible sky positions to use as objects from a possible 541. plFiberPlate : 45 possible sky positions to use as objects from a possible 540. plFiberPlate : 32 possible sky positions to use as objects from a possible 539. plFiberPlate : 13 possible sky positions to use as objects from a possible 538. plFiberPlate : 20 possible sky positions to use as objects from a possible 537. plFiberPlate : 8 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 12 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 30 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 12 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0569.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0570.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0570.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0571.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 126 2 25 111 3 16 112 4 15 120 5 24 99 6 11 41 7 11 64 8 21 100 9 12 83 10 36 150 11 29 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 198 53 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 201 33 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 191 59 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 195 12 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 200 15 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 192 71 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 187 37 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 186 63 plFiberPlate : 111 possible sky positions to use as objects from a possible 545. plFiberPlate : 63 possible sky positions to use as objects from a possible 544. plFiberPlate : 51 possible sky positions to use as objects from a possible 543. plFiberPlate : 26 possible sky positions to use as objects from a possible 542. plFiberPlate : 23 possible sky positions to use as objects from a possible 541. plFiberPlate : 28 possible sky positions to use as objects from a possible 540. plFiberPlate : 34 possible sky positions to use as objects from a possible 539. plFiberPlate : 54 possible sky positions to use as objects from a possible 538. plFiberPlate : 47 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 7 possible sky positions to use as objects from a possible 534. plFiberPlate : 7 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 19 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 46 possible sky positions to use as objects from a possible 529. plFiberPlate : 51 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 10 possible sky positions to use as objects from a possible 526. plFiberPlate : 6 possible sky positions to use as objects from a possible 525. plFiberPlate : 5 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 16 possible sky positions to use as objects from a possible 522. plFiberPlate : 15 possible sky positions to use as objects from a possible 521. plFiberPlate : 20 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 6 possible sky positions to use as objects from a possible 518. plFiberPlate : 4 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 1 possible sky positions to use as objects from a possible 515. plFiberPlate : 20 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0570.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0571.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0571.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0572.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 129 2 25 110 3 26 102 4 28 121 5 20 110 6 10 53 7 13 63 8 22 99 9 19 84 10 32 156 11 18 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 201 33 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 204 25 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 203 67 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 213 48 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 216 61 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 214 69 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 206 12 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 205 40 plFiberPlate : 130 possible sky positions to use as objects from a possible 571. plFiberPlate : 81 possible sky positions to use as objects from a possible 570. plFiberPlate : 27 possible sky positions to use as objects from a possible 569. plFiberPlate : 10 possible sky positions to use as objects from a possible 568. plFiberPlate : 22 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 68 possible sky positions to use as objects from a possible 565. plFiberPlate : 59 possible sky positions to use as objects from a possible 564. plFiberPlate : 44 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 8 possible sky positions to use as objects from a possible 561. plFiberPlate : 8 possible sky positions to use as objects from a possible 560. plFiberPlate : 10 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 16 possible sky positions to use as objects from a possible 557. plFiberPlate : 17 possible sky positions to use as objects from a possible 556. plFiberPlate : 66 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 3 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 14 possible sky positions to use as objects from a possible 548. plFiberPlate : 24 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 17 possible sky positions to use as objects from a possible 540. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0571.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0572.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0572.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0573.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 119 2 24 108 3 19 98 4 21 99 5 19 118 6 10 76 7 12 75 8 14 118 9 17 111 10 27 157 11 21 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 221 13 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 222 57 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 221 48 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 226 29 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 212 40 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 214 69 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 216 61 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 227 18 plFiberPlate : 115 possible sky positions to use as objects from a possible 579. plFiberPlate : 81 possible sky positions to use as objects from a possible 578. plFiberPlate : 68 possible sky positions to use as objects from a possible 577. plFiberPlate : 63 possible sky positions to use as objects from a possible 576. plFiberPlate : 37 possible sky positions to use as objects from a possible 575. plFiberPlate : 45 possible sky positions to use as objects from a possible 574. plFiberPlate : 29 possible sky positions to use as objects from a possible 573. plFiberPlate : 63 possible sky positions to use as objects from a possible 572. plFiberPlate : 55 possible sky positions to use as objects from a possible 571. plFiberPlate : 37 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 15 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 69 possible sky positions to use as objects from a possible 563. plFiberPlate : 56 possible sky positions to use as objects from a possible 562. plFiberPlate : 47 possible sky positions to use as objects from a possible 561. plFiberPlate : 25 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 24 possible sky positions to use as objects from a possible 557. plFiberPlate : 24 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 50 possible sky positions to use as objects from a possible 554. plFiberPlate : 32 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 12 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0572.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0573.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0573.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0574.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 100 2 28 89 3 21 89 4 19 112 5 16 130 6 18 65 7 14 63 8 18 88 9 16 95 10 29 143 11 21 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 237 55 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 237 72 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 234 20 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 235 29 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 30 9 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 232 28 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 230 23 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 235 70 plFiberPlate : 121 possible sky positions to use as objects from a possible 534. plFiberPlate : 92 possible sky positions to use as objects from a possible 533. plFiberPlate : 44 possible sky positions to use as objects from a possible 532. plFiberPlate : 29 possible sky positions to use as objects from a possible 531. plFiberPlate : 43 possible sky positions to use as objects from a possible 530. plFiberPlate : 14 possible sky positions to use as objects from a possible 529. plFiberPlate : 36 possible sky positions to use as objects from a possible 528. plFiberPlate : 75 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 12 possible sky positions to use as objects from a possible 525. plFiberPlate : 10 possible sky positions to use as objects from a possible 524. plFiberPlate : 6 possible sky positions to use as objects from a possible 523. plFiberPlate : 11 possible sky positions to use as objects from a possible 522. plFiberPlate : 6 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 76 possible sky positions to use as objects from a possible 518. plFiberPlate : 42 possible sky positions to use as objects from a possible 517. plFiberPlate : 22 possible sky positions to use as objects from a possible 516. plFiberPlate : 6 possible sky positions to use as objects from a possible 515. plFiberPlate : 9 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 10 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 47 possible sky positions to use as objects from a possible 509. plFiberPlate : 24 possible sky positions to use as objects from a possible 508. plFiberPlate : 5 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 6 possible sky positions to use as objects from a possible 505. plFiberPlate : 5 possible sky positions to use as objects from a possible 504. plFiberPlate : 15 possible sky positions to use as objects from a possible 503. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0573.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0574.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0574.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0575.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 115 2 20 109 3 18 101 4 17 109 5 19 127 6 10 83 7 5 77 8 13 94 9 16 114 10 28 172 11 20 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 244 45 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 249 20 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 246 65 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 253 19 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 238 14 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 246 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 252 16 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 235 70 plFiberPlate : 109 possible sky positions to use as objects from a possible 593. plFiberPlate : 110 possible sky positions to use as objects from a possible 592. plFiberPlate : 65 possible sky positions to use as objects from a possible 591. plFiberPlate : 41 possible sky positions to use as objects from a possible 590. plFiberPlate : 30 possible sky positions to use as objects from a possible 589. plFiberPlate : 39 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : 63 possible sky positions to use as objects from a possible 586. plFiberPlate : 46 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 7 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 5 possible sky positions to use as objects from a possible 579. plFiberPlate : 3 possible sky positions to use as objects from a possible 578. plFiberPlate : 78 possible sky positions to use as objects from a possible 577. plFiberPlate : 29 possible sky positions to use as objects from a possible 576. plFiberPlate : 21 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 6 possible sky positions to use as objects from a possible 572. plFiberPlate : 7 possible sky positions to use as objects from a possible 571. plFiberPlate : 7 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 45 possible sky positions to use as objects from a possible 568. plFiberPlate : 25 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 5 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0574.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0575.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0575.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0576.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 118 2 24 106 3 24 101 4 22 128 5 16 122 6 6 74 7 8 70 8 9 108 9 9 100 10 21 135 11 14 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 261 25 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 255 49 plFiberPlate : adding spectro-photo std with objId = 2125 0 1 253 49 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 258 38 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 263 21 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 263 13 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 252 16 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 252 35 plFiberPlate : 110 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 28 possible sky positions to use as objects from a possible 583. plFiberPlate : 25 possible sky positions to use as objects from a possible 582. plFiberPlate : 17 possible sky positions to use as objects from a possible 581. plFiberPlate : 27 possible sky positions to use as objects from a possible 580. plFiberPlate : 45 possible sky positions to use as objects from a possible 579. plFiberPlate : 70 possible sky positions to use as objects from a possible 578. plFiberPlate : 10 possible sky positions to use as objects from a possible 577. plFiberPlate : 5 possible sky positions to use as objects from a possible 576. plFiberPlate : 2 possible sky positions to use as objects from a possible 575. plFiberPlate : 2 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 14 possible sky positions to use as objects from a possible 572. plFiberPlate : 9 possible sky positions to use as objects from a possible 571. plFiberPlate : 7 possible sky positions to use as objects from a possible 570. plFiberPlate : 82 possible sky positions to use as objects from a possible 569. plFiberPlate : 21 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : 4 possible sky positions to use as objects from a possible 566. plFiberPlate : 1 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 20 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : 15 possible sky positions to use as objects from a possible 561. plFiberPlate : 46 possible sky positions to use as objects from a possible 560. plFiberPlate : 29 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 9 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0575.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0576.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0576.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0577.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 140 2 21 123 3 13 112 4 13 112 5 11 123 6 7 71 7 6 75 8 16 118 9 11 101 10 21 162 11 20 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 278 28 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 275 8 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 269 26 plFiberPlate : adding spectro-photo std with objId = 2126 0 6 270 28 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 271 20 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 267 63 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 263 21 plFiberPlate : adding spectro-photo std with objId = 2126 0 4 267 21 plFiberPlate : 112 possible sky positions to use as objects from a possible 624. plFiberPlate : 52 possible sky positions to use as objects from a possible 623. plFiberPlate : 45 possible sky positions to use as objects from a possible 622. plFiberPlate : 25 possible sky positions to use as objects from a possible 621. plFiberPlate : 32 possible sky positions to use as objects from a possible 620. plFiberPlate : 30 possible sky positions to use as objects from a possible 619. plFiberPlate : 66 possible sky positions to use as objects from a possible 618. plFiberPlate : 55 possible sky positions to use as objects from a possible 617. plFiberPlate : 60 possible sky positions to use as objects from a possible 616. plFiberPlate : 33 possible sky positions to use as objects from a possible 615. plFiberPlate : 19 possible sky positions to use as objects from a possible 614. plFiberPlate : 13 possible sky positions to use as objects from a possible 613. plFiberPlate : 7 possible sky positions to use as objects from a possible 612. plFiberPlate : 10 possible sky positions to use as objects from a possible 611. plFiberPlate : 24 possible sky positions to use as objects from a possible 610. plFiberPlate : 34 possible sky positions to use as objects from a possible 609. plFiberPlate : 73 possible sky positions to use as objects from a possible 608. plFiberPlate : 54 possible sky positions to use as objects from a possible 607. plFiberPlate : 40 possible sky positions to use as objects from a possible 606. plFiberPlate : 28 possible sky positions to use as objects from a possible 605. plFiberPlate : 9 possible sky positions to use as objects from a possible 604. plFiberPlate : 18 possible sky positions to use as objects from a possible 603. plFiberPlate : 5 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 42 possible sky positions to use as objects from a possible 600. plFiberPlate : 27 possible sky positions to use as objects from a possible 599. plFiberPlate : 14 possible sky positions to use as objects from a possible 598. plFiberPlate : 4 possible sky positions to use as objects from a possible 597. plFiberPlate : 2 possible sky positions to use as objects from a possible 596. plFiberPlate : 6 possible sky positions to use as objects from a possible 595. plFiberPlate : 3 possible sky positions to use as objects from a possible 594. plFiberPlate : 15 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0576.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0577.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0577.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0578.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 152 2 21 110 3 19 107 4 8 118 5 14 101 6 6 74 7 12 85 8 12 123 9 8 99 10 25 167 11 16 130 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 286 39 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 273 64 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 286 55 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 283 47 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 281 35 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 291 26 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 282 40 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 277 27 plFiberPlate : 105 possible sky positions to use as objects from a possible 619. plFiberPlate : 118 possible sky positions to use as objects from a possible 618. plFiberPlate : 55 possible sky positions to use as objects from a possible 617. plFiberPlate : 27 possible sky positions to use as objects from a possible 616. plFiberPlate : 19 possible sky positions to use as objects from a possible 615. plFiberPlate : 44 possible sky positions to use as objects from a possible 614. plFiberPlate : 86 possible sky positions to use as objects from a possible 613. plFiberPlate : 62 possible sky positions to use as objects from a possible 612. plFiberPlate : 60 possible sky positions to use as objects from a possible 611. plFiberPlate : 47 possible sky positions to use as objects from a possible 610. plFiberPlate : 32 possible sky positions to use as objects from a possible 609. plFiberPlate : 9 possible sky positions to use as objects from a possible 608. plFiberPlate : 11 possible sky positions to use as objects from a possible 607. plFiberPlate : 9 possible sky positions to use as objects from a possible 606. plFiberPlate : 36 possible sky positions to use as objects from a possible 605. plFiberPlate : 37 possible sky positions to use as objects from a possible 604. plFiberPlate : 39 possible sky positions to use as objects from a possible 603. plFiberPlate : 45 possible sky positions to use as objects from a possible 602. plFiberPlate : 38 possible sky positions to use as objects from a possible 601. plFiberPlate : 29 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : 5 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 20 possible sky positions to use as objects from a possible 596. plFiberPlate : 23 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : 35 possible sky positions to use as objects from a possible 593. plFiberPlate : 41 possible sky positions to use as objects from a possible 592. plFiberPlate : 38 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 21 possible sky positions to use as objects from a possible 589. plFiberPlate : 35 possible sky positions to use as objects from a possible 588. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0577.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0578.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0578.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0579.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 137 2 16 97 3 12 99 4 10 127 5 13 138 6 8 87 7 14 88 8 10 113 9 11 108 10 14 154 11 12 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 299 38 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 283 47 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 303 21 plFiberPlate : adding spectro-photo std with objId = 2125 0 4 291 26 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 299 17 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 296 10 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 300 24 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 299 21 plFiberPlate : 153 possible sky positions to use as objects from a possible 638. plFiberPlate : 56 possible sky positions to use as objects from a possible 637. plFiberPlate : 38 possible sky positions to use as objects from a possible 636. plFiberPlate : 16 possible sky positions to use as objects from a possible 635. plFiberPlate : 30 possible sky positions to use as objects from a possible 634. plFiberPlate : 42 possible sky positions to use as objects from a possible 633. plFiberPlate : 48 possible sky positions to use as objects from a possible 632. plFiberPlate : 95 possible sky positions to use as objects from a possible 631. plFiberPlate : 73 possible sky positions to use as objects from a possible 630. plFiberPlate : 30 possible sky positions to use as objects from a possible 629. plFiberPlate : 12 possible sky positions to use as objects from a possible 628. plFiberPlate : 11 possible sky positions to use as objects from a possible 627. plFiberPlate : 6 possible sky positions to use as objects from a possible 626. plFiberPlate : 19 possible sky positions to use as objects from a possible 625. plFiberPlate : 36 possible sky positions to use as objects from a possible 624. plFiberPlate : 22 possible sky positions to use as objects from a possible 623. plFiberPlate : 53 possible sky positions to use as objects from a possible 622. plFiberPlate : 43 possible sky positions to use as objects from a possible 621. plFiberPlate : 24 possible sky positions to use as objects from a possible 620. plFiberPlate : 13 possible sky positions to use as objects from a possible 619. plFiberPlate : 4 possible sky positions to use as objects from a possible 618. plFiberPlate : 12 possible sky positions to use as objects from a possible 617. plFiberPlate : 5 possible sky positions to use as objects from a possible 616. plFiberPlate : 18 possible sky positions to use as objects from a possible 615. plFiberPlate : 11 possible sky positions to use as objects from a possible 614. plFiberPlate : 36 possible sky positions to use as objects from a possible 613. plFiberPlate : 28 possible sky positions to use as objects from a possible 612. plFiberPlate : 18 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 11 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0578.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0579.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0579.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0580.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 110 2 16 105 3 9 105 4 8 129 5 16 120 6 8 76 7 7 70 8 9 101 9 8 103 10 18 159 11 13 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 310 54 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 296 10 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 311 10 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 310 61 plFiberPlate : adding spectro-photo std with objId = 2126 0 5 300 24 plFiberPlate : adding spectro-photo std with objId = 2125 0 3 304 37 plFiberPlate : adding spectro-photo std with objId = 2126 0 2 308 30 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 311 11 plFiberPlate : 150 possible sky positions to use as objects from a possible 578. plFiberPlate : 76 possible sky positions to use as objects from a possible 577. plFiberPlate : 34 possible sky positions to use as objects from a possible 576. plFiberPlate : 50 possible sky positions to use as objects from a possible 575. plFiberPlate : 27 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 23 possible sky positions to use as objects from a possible 572. plFiberPlate : 65 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 4 possible sky positions to use as objects from a possible 569. plFiberPlate : 7 possible sky positions to use as objects from a possible 568. plFiberPlate : 4 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 15 possible sky positions to use as objects from a possible 565. plFiberPlate : 6 possible sky positions to use as objects from a possible 564. plFiberPlate : 6 possible sky positions to use as objects from a possible 563. plFiberPlate : 68 possible sky positions to use as objects from a possible 562. plFiberPlate : 42 possible sky positions to use as objects from a possible 561. plFiberPlate : 27 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 8 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 9 possible sky positions to use as objects from a possible 556. plFiberPlate : 6 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : 33 possible sky positions to use as objects from a possible 553. plFiberPlate : 24 possible sky positions to use as objects from a possible 552. plFiberPlate : 20 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 7 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 10 possible sky positions to use as objects from a possible 547. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0579.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0580.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0580.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0581.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 81 2 12 102 3 12 95 4 10 123 5 8 124 6 7 73 7 7 60 8 8 61 9 14 98 10 20 162 11 14 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2126 0 6 321 29 plFiberPlate : adding spectro-photo std with objId = 2125 0 6 324 19 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 322 9 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 321 4 plFiberPlate : adding spectro-photo std with objId = 2125 0 5 326 40 plFiberPlate : adding spectro-photo std with objId = 2125 0 2 320 47 plFiberPlate : adding spectro-photo std with objId = 2126 0 3 318 12 plFiberPlate : adding spectro-photo std with objId = 2126 0 1 316 10 plFiberPlate : 118 possible sky positions to use as objects from a possible 526. plFiberPlate : 55 possible sky positions to use as objects from a possible 525. plFiberPlate : 31 possible sky positions to use as objects from a possible 524. plFiberPlate : 48 possible sky positions to use as objects from a possible 523. plFiberPlate : 25 possible sky positions to use as objects from a possible 522. plFiberPlate : 17 possible sky positions to use as objects from a possible 521. plFiberPlate : 17 possible sky positions to use as objects from a possible 520. plFiberPlate : 85 possible sky positions to use as objects from a possible 519. plFiberPlate : 41 possible sky positions to use as objects from a possible 518. plFiberPlate : 23 possible sky positions to use as objects from a possible 517. plFiberPlate : 23 possible sky positions to use as objects from a possible 516. plFiberPlate : 7 possible sky positions to use as objects from a possible 515. plFiberPlate : 29 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : 4 possible sky positions to use as objects from a possible 512. plFiberPlate : 13 possible sky positions to use as objects from a possible 511. plFiberPlate : 69 possible sky positions to use as objects from a possible 510. plFiberPlate : 33 possible sky positions to use as objects from a possible 509. plFiberPlate : 21 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 7 possible sky positions to use as objects from a possible 506. plFiberPlate : 14 possible sky positions to use as objects from a possible 505. plFiberPlate : 9 possible sky positions to use as objects from a possible 504. plFiberPlate : 4 possible sky positions to use as objects from a possible 503. plFiberPlate : 16 possible sky positions to use as objects from a possible 502. plFiberPlate : 33 possible sky positions to use as objects from a possible 501. plFiberPlate : 23 possible sky positions to use as objects from a possible 500. plFiberPlate : 14 possible sky positions to use as objects from a possible 499. plFiberPlate : 7 possible sky positions to use as objects from a possible 498. plFiberPlate : 4 possible sky positions to use as objects from a possible 497. plFiberPlate : 17 possible sky positions to use as objects from a possible 496. plFiberPlate : 7 possible sky positions to use as objects from a possible 495. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0580.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0581.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4/plOverlay-0581.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Apr 4 09:00:42 CDT 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v8_11/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v8_11 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 20 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0562.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0562.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0562.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0563.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.9692,-4.3965) and (-12.18,-3.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0563.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0563.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0564.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0564.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0564.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0565.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0565.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0565.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0566.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.4598,-6.9687) and (-11.46,-5.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0566.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0566.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0567.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6062,-5.3185) and (11.90,-4.72) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0567.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0567.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0568.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5275,6.9319) and (-11.29,6.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0568.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0568.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0569.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0569.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0569.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.7263,8.0980) and (11.28,-5.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0570.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0570.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0570.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0571.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0571.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0571.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0572.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2011,2.7971) and (-12.65,1.86) plMakeFanucCodes : fixed path between (8.5445,-9.5308) and (10.48,-6.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0572.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0572.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0573.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.3780,-9.5974) and (7.11,-10.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0573.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0573.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0574.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0574.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0574.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0575.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.5681,4.8837) and (12.27,2.89) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0575.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0575.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0576.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5778,-6.7749) and (-11.99,-3.68) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0576.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0576.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0577.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0555,6.4535) and (-11.89,4.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0577.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0577.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0578.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.8496,8.1388) and (-10.43,7.41) plMakeFanucCodes : fixed path between (-10.4275,7.4130) and (-10.81,6.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0578.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0578.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0579.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0579.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0579.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0580.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0580.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0580.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0581.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0581.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4/plFanuc-0581.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Apr 4 09:01:43 CDT 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v8_11/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v8_11 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140db5568 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 20 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 562 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 563 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 564 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 565 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 566 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 567 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 568 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 569 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 570 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 571 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 572 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 573 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 574 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 575 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 576 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 577 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 578 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 579 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 580 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 581 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Apr 4 09:02:13 CDT 2001 ALL DONE PS: Read file for stderr output of this job.