Sender: LSF System Subject: Job 26736: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Apr 3 14:35:46 2001 Results reported at Tue Apr 3 14:36:41 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /usr/local/etc/fermi.shrc ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v8_11 -f OSF1 -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 45.41 sec. Max Memory : 7 MB Max Swap : 29 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Tue Apr 3 14:35:48 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Apr 3 14:35:49 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_4:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/p/OSF1/ups/v4_4a/bin:/p/OSF1/emacs/v19_30a/bin:/p/OSF1/sdsscvs/v1_4/bin:/p/OSF1/rcs/v5_6/bin:/p/OSF1/diff/v1_0/bin:/p/OSF1/cvs/v1_10/bin:/home/s1/bgreen/bin:/usr/sbin:/usr/ccs/bin:/bin:/usr/bin:/usr/lbin:/usr/ucb:/etc:/usr/bin/X11:/usr/local/bin:.:/p/OSF1/ssc/v4_6/bin:/p/OSF1/astrom/v3_3/bin:/p/OSF1/photo/v5_2_17/bin:/p/OSF1/mt/v7_2/bin:/p/OSF1/ghostview/v4_0b/bin:/p/OSF1/dp/v8_11/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_10/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/dervish/v7_15/bin:/p/OSF1/sdssmath/v5_0/bin:/p/OSF1/astrotools/v5_2/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Tue Apr 3 14:35:49 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_3 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_2 CVS_DIR=/p/OSF1/cvs/v1_10 DERVISH_DIR=/p/OSF1/dervish/v7_15 DIFF_DIR=/p/OSF1/diff/v1_0 DP_DIR=/p/OSF1/dp/v8_11 EMACS_DIR=/p/OSF1/emacs/v19_30a ENCP_DIR=/p/OSF1/encp/v2_4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v7_15/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_1 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_2 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_7_8 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_17 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 RCS_DIR=/p/OSF1/rcs/v5_6 SDSSCVS_DIR=/p/OSF1/sdsscvs/v1_4 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_0 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_10 SETUPS_DIR=/usr/local/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_6 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/data/dp3.b/data/ucac/v0_7 UPS_DIR=/p/OSF1/ups/v4_4a --------------------------------------------------------------- Tue Apr 3 14:35:49 CDT 2001 Begin running plate --------------------------------------------------------------- Tue Apr 3 14:35:49 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v8_11/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v8_11 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140db33e8 makePlates : beginning loop over plObs chain; makePlates : making 20 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0353.par makePlates : plateInfo struct for plate 562 : (h2).mjd 52301 (h2).raCen 125.2086 (h2).decCen 2.447401 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.209 2.447 125.209 3.947 plMakePlateFromTile : mjd of obs : 52301.646314 Observed HA/dec of plate center, fiducial point (deg) : -20.002 2.451 -20.003 3.951 The rotation angle of the fid. point is 29.568999 plMakePlateFromTile : beginning loop over 677 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0354.par makePlates : plateInfo struct for plate 563 : (h2).mjd 52301 (h2).raCen 128.198 (h2).decCen 2.684894 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.198 2.685 128.198 4.185 plMakePlateFromTile : mjd of obs : 52301.646282 Observed HA/dec of plate center, fiducial point (deg) : -23.002 2.688 -23.003 4.188 The rotation angle of the fid. point is 33.084237 plMakePlateFromTile : beginning loop over 799 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0355.par makePlates : plateInfo struct for plate 564 : (h2).mjd 52301 (h2).raCen 131.1937 (h2).decCen 2.909792 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.194 2.910 131.194 4.410 plMakePlateFromTile : mjd of obs : 52301.646267 Observed HA/dec of plate center, fiducial point (deg) : -26.002 2.913 -26.003 4.412 The rotation angle of the fid. point is 36.283517 plMakePlateFromTile : beginning loop over 1090 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0356.par makePlates : plateInfo struct for plate 565 : (h2).mjd 52301 (h2).raCen 134.0611 (h2).decCen 2.974602 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.061 2.975 134.061 4.475 plMakePlateFromTile : mjd of obs : 52301.645897 Observed HA/dec of plate center, fiducial point (deg) : -29.002 2.978 -29.003 4.477 The rotation angle of the fid. point is 39.063324 plMakePlateFromTile : beginning loop over 1169 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0357.par makePlates : plateInfo struct for plate 566 : (h2).mjd 52301 (h2).raCen 136.7271 (h2).decCen 3.208784 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.727 3.209 136.727 4.709 plMakePlateFromTile : mjd of obs : 52301.689307 Observed HA/dec of plate center, fiducial point (deg) : -16.002 3.210 -16.003 4.710 The rotation angle of the fid. point is 25.086999 plMakePlateFromTile : beginning loop over 1102 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-15.45, -84.86, 8.5) and (-14.79, -84.89, 8.4) checkLTHo : distance = 0.652, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-15.45, -84.86, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0358.par makePlates : plateInfo struct for plate 567 : (h2).mjd 52301 (h2).raCen 139.1328 (h2).decCen 3.312311 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.133 3.312 139.133 4.812 plMakePlateFromTile : mjd of obs : 52301.687658 Observed HA/dec of plate center, fiducial point (deg) : -19.002 3.314 -19.003 4.813 The rotation angle of the fid. point is 28.976157 plMakePlateFromTile : beginning loop over 1126 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0359.par makePlates : plateInfo struct for plate 568 : (h2).mjd 52301 (h2).raCen 141.5264 (h2).decCen 3.494527 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.526 3.495 141.526 4.995 plMakePlateFromTile : mjd of obs : 52301.688746 Observed HA/dec of plate center, fiducial point (deg) : -21.002 3.496 -21.003 4.995 The rotation angle of the fid. point is 31.467640 plMakePlateFromTile : beginning loop over 1206 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-155.42, 2.39, 8.3) and (-154.34, 1.52, 7.3) checkLTHo : distance = 1.391, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-155.42, 2.39, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0360.par makePlates : plateInfo struct for plate 569 : (h2).mjd 52301 (h2).raCen 143.7261 (h2).decCen 3.576293 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.726 3.576 143.726 5.076 plMakePlateFromTile : mjd of obs : 52301.689297 Observed HA/dec of plate center, fiducial point (deg) : -23.002 3.577 -23.003 5.077 The rotation angle of the fid. point is 33.740062 plMakePlateFromTile : beginning loop over 1159 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0361.par makePlates : plateInfo struct for plate 570 : (h2).mjd 52301 (h2).raCen 145.8622 (h2).decCen 3.779889 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.862 3.780 145.862 5.280 plMakePlateFromTile : mjd of obs : 52301.689672 Observed HA/dec of plate center, fiducial point (deg) : -25.002 3.781 -25.003 5.280 The rotation angle of the fid. point is 35.960465 plMakePlateFromTile : beginning loop over 1146 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0362.par makePlates : plateInfo struct for plate 571 : (h2).mjd 52301 (h2).raCen 147.8906 (h2).decCen 3.883403 (h2).haCen -12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.891 3.883 147.891 5.383 plMakePlateFromTile : mjd of obs : 52301.731315 Observed HA/dec of plate center, fiducial point (deg) : -12.002 3.883 -12.003 5.383 The rotation angle of the fid. point is 19.851018 plMakePlateFromTile : beginning loop over 1102 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0363.par makePlates : plateInfo struct for plate 572 : (h2).mjd 52301 (h2).raCen 149.8767 (h2).decCen 3.922344 (h2).haCen -14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.877 3.922 149.877 5.422 plMakePlateFromTile : mjd of obs : 52301.731275 Observed HA/dec of plate center, fiducial point (deg) : -14.002 3.922 -14.003 5.421 The rotation angle of the fid. point is 22.790541 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0364.par makePlates : plateInfo struct for plate 573 : (h2).mjd 52301 (h2).raCen 151.7823 (h2).decCen 4.016796 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.782 4.017 151.782 5.517 plMakePlateFromTile : mjd of obs : 52301.731011 Observed HA/dec of plate center, fiducial point (deg) : -16.002 4.016 -16.003 5.516 The rotation angle of the fid. point is 25.620493 plMakePlateFromTile : beginning loop over 1133 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0365.par makePlates : plateInfo struct for plate 574 : (h2).mjd 52301 (h2).raCen 153.8137 (h2).decCen 4.141604 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 153.814 4.142 153.814 5.642 plMakePlateFromTile : mjd of obs : 52301.731096 Observed HA/dec of plate center, fiducial point (deg) : -18.002 4.141 -18.003 5.640 The rotation angle of the fid. point is 28.323381 plMakePlateFromTile : beginning loop over 1106 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0366.par makePlates : plateInfo struct for plate 575 : (h2).mjd 52301 (h2).raCen 155.5827 (h2).decCen 4.157355 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.583 4.157 155.583 5.657 plMakePlateFromTile : mjd of obs : 52301.810813 Observed HA/dec of plate center, fiducial point (deg) : 8.998 4.156 8.998 5.656 The rotation angle of the fid. point is -15.322059 plMakePlateFromTile : beginning loop over 1153 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0367.par makePlates : plateInfo struct for plate 576 : (h2).mjd 52301 (h2).raCen 157.4442 (h2).decCen 4.352073 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.444 4.352 157.444 5.852 plMakePlateFromTile : mjd of obs : 52301.810428 Observed HA/dec of plate center, fiducial point (deg) : 6.998 4.351 6.998 5.850 The rotation angle of the fid. point is -12.126996 plMakePlateFromTile : beginning loop over 1145 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0368.par makePlates : plateInfo struct for plate 577 : (h2).mjd 52301 (h2).raCen 159.266 (h2).decCen 4.34661 (h2).haCen 5 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.266 4.347 159.266 5.847 plMakePlateFromTile : mjd of obs : 52301.809932 Observed HA/dec of plate center, fiducial point (deg) : 4.998 4.345 4.998 5.844 The rotation angle of the fid. point is -8.736801 plMakePlateFromTile : beginning loop over 1163 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (89.83, 302.63, 8.0) and (89.83, 302.54, 7.6) checkLTHo : distance = 0.092, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(89.83, 302.63, 8.0) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0369.par makePlates : plateInfo struct for plate 578 : (h2).mjd 52301 (h2).raCen 161.0525 (h2).decCen 4.427386 (h2).haCen 3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.053 4.427 161.053 5.927 plMakePlateFromTile : mjd of obs : 52301.809339 Observed HA/dec of plate center, fiducial point (deg) : 2.998 4.426 2.998 5.925 The rotation angle of the fid. point is -5.284805 plMakePlateFromTile : beginning loop over 1149 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-46.93, 69.44, 7.2) and (-46.71, 69.64, 6.2) checkLTHo : distance = 0.298, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-46.93, 69.44, 7.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0370.par makePlates : plateInfo struct for plate 579 : (h2).mjd 52301 (h2).raCen 162.8816 (h2).decCen 4.478768 (h2).haCen 17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.882 4.479 162.882 5.979 plMakePlateFromTile : mjd of obs : 52301.853200 Observed HA/dec of plate center, fiducial point (deg) : 16.998 4.477 16.998 5.977 The rotation angle of the fid. point is -27.259550 plMakePlateFromTile : beginning loop over 1161 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0371.par makePlates : plateInfo struct for plate 580 : (h2).mjd 52301 (h2).raCen 164.7745 (h2).decCen 4.58961 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 164.774 4.590 164.774 6.090 plMakePlateFromTile : mjd of obs : 52301.852901 Observed HA/dec of plate center, fiducial point (deg) : 14.998 4.588 14.998 6.087 The rotation angle of the fid. point is -24.621578 plMakePlateFromTile : beginning loop over 1105 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk16/complete//plPlugMapT-0372.par makePlates : plateInfo struct for plate 581 : (h2).mjd 52301 (h2).raCen 166.9384 (h2).decCen 4.665245 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.938 4.665 166.938 6.165 plMakePlateFromTile : mjd of obs : 52301.894919 Observed HA/dec of plate center, fiducial point (deg) : 27.998 4.664 27.998 6.164 The rotation angle of the fid. point is -39.474288 plMakePlateFromTile : beginning loop over 1009 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Apr 3 14:36:37 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v8_11/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v8_11 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 20 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4/plPlugMapP-0562.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 140 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 83 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 46 to list of science objects plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 22 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 72 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 197 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 209 to list of science objects plFiberPlate : adding sky number 38 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 78 to list of science objects plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 149 to list of science objects plFiberPlate : adding sky number 192 to list of science objects plFiberPlate : adding sky number 227 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 209 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 92 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 194 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 107 to list of science objects plFiberPlate : adding sky number 227 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 92 to list of science objects plFiberPlate : adding sky number 176 to list of science objects plFiberPlate : adding sky number 170 to list of science objects plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : adding sky number 6 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 167 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 207 to list of science objects plFiberPlate : adding sky number 68 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 194 to list of science objects plFiberPlate : adding sky number 121 to list of science objects plFiberPlate : adding sky number 25 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 103 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 83 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 72 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 8 to list of science objects plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 103 to list of science objects plFiberPlate : adding sky number 137 to list of science objects plFiberPlate : adding sky number 19 to list of science objects plFiberPlate : adding sky number 78 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 6 to list of science objects plFiberPlate : adding sky number 121 to list of science objects plFiberPlate : adding sky number 73 to list of science objects plFiberPlate : adding sky number 124 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 170 to list of science objects plFiberPlate : adding sky number 42 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 141 to list of science objects plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 23 to list of science objects plFiberPlate : adding sky number 147 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 23 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 92 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : adding sky number 40 to list of science objects plFiberPlate : adding sky number 68 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : adding sky number 19 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 146 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 113 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 67 to list of science objects plFiberPlate : adding sky number 21 to list of science objects plFiberPlate : adding sky number 34 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 107 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 63 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 18 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 55 to list of science objects plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 68 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 21 to list of science objects plFiberPlate : adding sky number 34 to list of science objects plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 63 to list of science objects plFiberPlate : adding sky number 42 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 25 to list of science objects plFiberPlate : adding sky number 3 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 14 to list of science objects plFiberPlate : adding sky number 54 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 25 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 73 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 20 to list of science objects plFiberPlate : adding sky number 8 to list of science objects plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 30 to list of science objects plFiberPlate : adding sky number 24 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 17 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 24 to list of science objError: fiberPlates -verbose=2 -skipBrightCheck failed. PS: Read file for stderr output of this job.