Sender: LSF System Subject: Job 41554: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Jan 2 12:13:15 2002 Results reported at Wed Jan 2 12:15:38 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_48 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.01.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 120.32 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Jan 2 12:13:21 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Jan 2 12:13:23 CST 2002 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/fnal/ups/prd/encp/v2_14OSF1-V4:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/ktools/v1_4/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/p/OSF1/tex/v3_14159/bin:/p/OSF1/netscape/v3_0g/bin:/p/OSF1/ximagetools/v3_0/bin:/p/OSF1/iraf/v2_11_3/bin:/home/s1/danvb/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5c/bin:/p/OSF1/photo/v5_2_27/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/GENERIC_UNIX/dp/v11_48/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_11/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_1/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_6/bin --------------------------------------------------------------- Wed Jan 2 12:13:23 CST 2002 ASTROM_DIR=/p/OSF1/astrom/v3_5c ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_1 DP_DIR=/p/GENERIC_UNIX/dp/v11_48 DUST_DIR=/p/IRIX6/dust/v1_0 ENCP_DIR=/fnal/ups/prd/encp/v2_14OSF1-V4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INFO_DIR=/fnal/ups/prd/Info/v1_6 INT_DIR=/p/OSF1/dervish/v8_1/doc/www/dervish.home.html IRAF_DIR=/p/OSF1/iraf/v2_11_3 KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NETSCAPE_DIR=/p/OSF1/netscape/v3_0g NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_2 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_27 PLATE_DIR=/p/OSF1/plate/v3_6 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_11 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TEX_DIR=/p/OSF1/tex/v3_14159 TEX_FILES_DIR=/p/GENERIC_UNIX/tex_files/v3_14159 TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XIMAGETOOLS_DIR=/p/OSF1/ximagetools/v3_0 --------------------------------------------------------------- Wed Jan 2 12:13:23 CST 2002 Begin running plate --------------------------------------------------------------- Wed Jan 2 12:13:23 CST 2002 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_48/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_48 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e1f1e8 makePlates : beginning loop over plObs chain; makePlates : making 10 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0596.par makePlates : plateInfo struct for plate 825 : (h2).mjd 52288 (h2).raCen 122.6349 (h2).decCen 33.59724 (h2).haCen -32 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.635 33.597 122.635 35.097 plMakePlateFromTile : mjd of obs : 52288.641442 Observed HA/dec of plate center, fiducial point (deg) : -32.002 33.592 -32.003 35.091 The rotation angle of the fid. point is 82.778879 plMakePlateFromTile : beginning loop over 1099 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-47.57, -299.77, 7.9) and (-47.75, -299.92, 7.2) checkLTHo : distance = 0.240, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-47.57, -299.77, 7.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0597.par makePlates : plateInfo struct for plate 826 : (h2).mjd 52288 (h2).raCen 125.1339 (h2).decCen 35.51464 (h2).haCen -35 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.134 35.515 125.134 37.015 plMakePlateFromTile : mjd of obs : 52288.640052 Observed HA/dec of plate center, fiducial point (deg) : -35.002 35.508 -35.003 37.008 The rotation angle of the fid. point is 85.181209 plMakePlateFromTile : beginning loop over 1116 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0598.par makePlates : plateInfo struct for plate 827 : (h2).mjd 52288 (h2).raCen 127.3409 (h2).decCen 37.3502 (h2).haCen -37 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.341 37.350 127.341 38.850 plMakePlateFromTile : mjd of obs : 52288.640623 Observed HA/dec of plate center, fiducial point (deg) : -37.002 37.343 -37.003 38.843 The rotation angle of the fid. point is 87.387655 plMakePlateFromTile : beginning loop over 1127 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0599.par makePlates : plateInfo struct for plate 828 : (h2).mjd 52288 (h2).raCen 129.5513 (h2).decCen 39.00219 (h2).haCen -39 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.551 39.002 129.551 40.502 plMakePlateFromTile : mjd of obs : 52288.641204 Observed HA/dec of plate center, fiducial point (deg) : -39.002 38.995 -39.003 40.494 The rotation angle of the fid. point is 88.959790 plMakePlateFromTile : beginning loop over 1149 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0600.par makePlates : plateInfo struct for plate 829 : (h2).mjd 52288 (h2).raCen 131.5632 (h2).decCen 40.41128 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.563 40.411 131.563 41.911 plMakePlateFromTile : mjd of obs : 52288.682803 Observed HA/dec of plate center, fiducial point (deg) : -26.002 40.402 -26.003 41.901 The rotation angle of the fid. point is 101.877871 plMakePlateFromTile : beginning loop over 1153 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0601.par makePlates : plateInfo struct for plate 830 : (h2).mjd 52288 (h2).raCen 133.5096 (h2).decCen 41.66308 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.510 41.663 133.510 43.163 plMakePlateFromTile : mjd of obs : 52288.682652 Observed HA/dec of plate center, fiducial point (deg) : -28.002 41.653 -28.003 43.152 The rotation angle of the fid. point is 102.688778 plMakePlateFromTile : beginning loop over 1179 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0602.par makePlates : plateInfo struct for plate 831 : (h2).mjd 52288 (h2).raCen 135.7287 (h2).decCen 43.06322 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.729 43.063 135.729 44.563 plMakePlateFromTile : mjd of obs : 52288.683257 Observed HA/dec of plate center, fiducial point (deg) : -30.002 43.052 -30.003 44.552 The rotation angle of the fid. point is 103.569102 plMakePlateFromTile : beginning loop over 1198 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0603.par makePlates : plateInfo struct for plate 832 : (h2).mjd 52288 (h2).raCen 138.4379 (h2).decCen 44.43879 (h2).haCen -33 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 138.438 44.439 138.438 45.939 plMakePlateFromTile : mjd of obs : 52288.682447 Observed HA/dec of plate center, fiducial point (deg) : -33.002 44.427 -33.002 45.927 The rotation angle of the fid. point is 103.147223 plMakePlateFromTile : beginning loop over 1170 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0604.par makePlates : plateInfo struct for plate 833 : (h2).mjd 52288 (h2).raCen 141.1541 (h2).decCen 45.7968 (h2).haCen -36 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.154 45.797 141.154 47.297 plMakePlateFromTile : mjd of obs : 52288.681656 Observed HA/dec of plate center, fiducial point (deg) : -36.002 45.785 -36.002 47.284 The rotation angle of the fid. point is 102.543372 plMakePlateFromTile : beginning loop over 1234 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk30/complete//plPlugMapT-0605.par makePlates : plateInfo struct for plate 834 : (h2).mjd 52288 (h2).raCen 144.1073 (h2).decCen 47.31186 (h2).haCen -39 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.6 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.107 47.312 144.107 48.812 plMakePlateFromTile : mjd of obs : 52288.681522 Observed HA/dec of plate center, fiducial point (deg) : -39.002 47.299 -39.002 48.798 The rotation angle of the fid. point is 102.054667 plMakePlateFromTile : beginning loop over 1214 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Jan 2 12:13:50 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_48/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_48 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 10 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0825.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 63 2 14 44 3 22 58 4 19 74 5 6 47 6 1 31 7 11 64 8 15 89 9 15 81 10 37 126 11 18 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 95 10 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 111 85 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 112 34 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 121 57 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 116 15 plFiberPlate : adding spectro-photo std with objId = 2777 0 2 109 14 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 110 17 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 122 23 plFiberPlate : 87 possible sky positions to use as objects from a possible 361. plFiberPlate : 73 possible sky positions to use as objects from a possible 360. plFiberPlate : 59 possible sky positions to use as objects from a possible 359. plFiberPlate : 41 possible sky positions to use as objects from a possible 358. plFiberPlate : 32 possible sky positions to use as objects from a possible 357. plFiberPlate : 20 possible sky positions to use as objects from a possible 356. plFiberPlate : 43 possible sky positions to use as objects from a possible 355. plFiberPlate : 56 possible sky positions to use as objects from a possible 354. plFiberPlate : 52 possible sky positions to use as objects from a possible 353. plFiberPlate : 46 possible sky positions to use as objects from a possible 352. plFiberPlate : 39 possible sky positions to use as objects from a possible 351. plFiberPlate : 28 possible sky positions to use as objects from a possible 350. plFiberPlate : 20 possible sky positions to use as objects from a possible 349. plFiberPlate : 22 possible sky positions to use as objects from a possible 348. plFiberPlate : 19 possible sky positions to use as objects from a possible 347. plFiberPlate : 15 possible sky positions to use as objects from a possible 346. plFiberPlate : 39 possible sky positions to use as objects from a possible 345. plFiberPlate : 36 possible sky positions to use as objects from a possible 344. plFiberPlate : 12 possible sky positions to use as objects from a possible 343. plFiberPlate : 7 possible sky positions to use as objects from a possible 342. plFiberPlate : 13 possible sky positions to use as objects from a possible 341. plFiberPlate : 5 possible sky positions to use as objects from a possible 340. plFiberPlate : 9 possible sky positions to use as objects from a possible 339. plFiberPlate : 15 possible sky positions to use as objects from a possible 338. plFiberPlate : 13 possible sky positions to use as objects from a possible 337. plFiberPlate : 10 possible sky positions to use as objects from a possible 336. plFiberPlate : 7 possible sky positions to use as objects from a possible 335. plFiberPlate : 6 possible sky positions to use as objects from a possible 334. plFiberPlate : 5 possible sky positions to use as objects from a possible 333. plFiberPlate : 9 possible sky positions to use as objects from a possible 332. plFiberPlate : 12 possible sky positions to use as objects from a possible 331. plFiberPlate : 5 possible sky positions to use as objects from a possible 330. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0825.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0825.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0826.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 41 2 12 31 3 22 71 4 23 94 5 4 61 6 4 57 7 10 87 8 15 97 9 7 105 10 27 116 11 16 59 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 132 22 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 139 55 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 140 33 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 133 95 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 128 80 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 124 73 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 143 84 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 123 25 plFiberPlate : 105 possible sky positions to use as objects from a possible 397. plFiberPlate : 85 possible sky positions to use as objects from a possible 396. plFiberPlate : 68 possible sky positions to use as objects from a possible 395. plFiberPlate : 47 possible sky positions to use as objects from a possible 394. plFiberPlate : 30 possible sky positions to use as objects from a possible 393. plFiberPlate : 17 possible sky positions to use as objects from a possible 392. plFiberPlate : 27 possible sky positions to use as objects from a possible 391. plFiberPlate : 55 possible sky positions to use as objects from a possible 390. plFiberPlate : 48 possible sky positions to use as objects from a possible 389. plFiberPlate : 34 possible sky positions to use as objects from a possible 388. plFiberPlate : 27 possible sky positions to use as objects from a possible 387. plFiberPlate : 24 possible sky positions to use as objects from a possible 386. plFiberPlate : 17 possible sky positions to use as objects from a possible 385. plFiberPlate : 21 possible sky positions to use as objects from a possible 384. plFiberPlate : 12 possible sky positions to use as objects from a possible 383. plFiberPlate : 3 possible sky positions to use as objects from a possible 382. plFiberPlate : 34 possible sky positions to use as objects from a possible 381. plFiberPlate : 39 possible sky positions to use as objects from a possible 380. plFiberPlate : 22 possible sky positions to use as objects from a possible 379. plFiberPlate : 12 possible sky positions to use as objects from a possible 378. plFiberPlate : 0 possible sky positions to use as objects from a possible 377. plFiberPlate: No sky found for bundle at 18.696 60.594, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 377. plFiberPlate: No sky found for bundle at 18.696 60.594, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 377. plFiberPlate: No sky found for bundle at 18.696 60.594, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 377. plFiberPlate: No sky found for bundle at 18.696 60.594, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 377. plFiberPlate: No sky found for bundle at 18.696 60.594, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 377. plFiberPlate : 13 possible sky positions to use as objects from a possible 376. plFiberPlate : 12 possible sky positions to use as objects from a possible 375. plFiberPlate : 13 possible sky positions to use as objects from a possible 374. plFiberPlate : 14 possible sky positions to use as objects from a possible 373. plFiberPlate : 23 possible sky positions to use as objects from a possible 372. plFiberPlate : 11 possible sky positions to use as objects from a possible 371. plFiberPlate : 14 possible sky positions to use as objects from a possible 370. plFiberPlate : 16 possible sky positions to use as objects from a possible 369. plFiberPlate : 12 possible sky positions to use as objects from a possible 368. plFiberPlate : 22 possible sky positions to use as objects from a possible 367. plFiberPlate : 8 possible sky positions to use as objects from a possible 366. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0825.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0826.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0826.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0827.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 53 2 3 35 3 16 74 4 14 75 5 4 62 6 3 52 7 5 83 8 14 114 9 8 113 10 18 113 11 7 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 147 91 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 151 62 plFiberPlate : adding spectro-photo std with objId = 2777 0 1 136 22 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 152 16 plFiberPlate : adding spectro-photo std with objId = 2777 0 2 148 17 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 164 84 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 156 4 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 139 74 plFiberPlate : 90 possible sky positions to use as objects from a possible 421. plFiberPlate : 68 possible sky positions to use as objects from a possible 420. plFiberPlate : 49 possible sky positions to use as objects from a possible 419. plFiberPlate : 37 possible sky positions to use as objects from a possible 418. plFiberPlate : 20 possible sky positions to use as objects from a possible 417. plFiberPlate : 10 possible sky positions to use as objects from a possible 416. plFiberPlate : 23 possible sky positions to use as objects from a possible 415. plFiberPlate : 45 possible sky positions to use as objects from a possible 414. plFiberPlate : 35 possible sky positions to use as objects from a possible 413. plFiberPlate : 27 possible sky positions to use as objects from a possible 412. plFiberPlate : 21 possible sky positions to use as objects from a possible 411. plFiberPlate : 17 possible sky positions to use as objects from a possible 410. plFiberPlate : 7 possible sky positions to use as objects from a possible 409. plFiberPlate : 9 possible sky positions to use as objects from a possible 408. plFiberPlate : 9 possible sky positions to use as objects from a possible 407. plFiberPlate : 17 possible sky positions to use as objects from a possible 406. plFiberPlate : 49 possible sky positions to use as objects from a possible 405. plFiberPlate : 50 possible sky positions to use as objects from a possible 404. plFiberPlate : 44 possible sky positions to use as objects from a possible 403. plFiberPlate : 30 possible sky positions to use as objects from a possible 402. plFiberPlate : 20 possible sky positions to use as objects from a possible 401. plFiberPlate : 13 possible sky positions to use as objects from a possible 400. plFiberPlate : 10 possible sky positions to use as objects from a possible 399. plFiberPlate : 20 possible sky positions to use as objects from a possible 398. plFiberPlate : 29 possible sky positions to use as objects from a possible 397. plFiberPlate : 25 possible sky positions to use as objects from a possible 396. plFiberPlate : 12 possible sky positions to use as objects from a possible 395. plFiberPlate : 11 possible sky positions to use as objects from a possible 394. plFiberPlate : 7 possible sky positions to use as objects from a possible 393. plFiberPlate : 9 possible sky positions to use as objects from a possible 392. plFiberPlate : 14 possible sky positions to use as objects from a possible 391. plFiberPlate : 24 possible sky positions to use as objects from a possible 390. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0826.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0827.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0827.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0828.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 55 2 11 45 3 13 80 4 13 99 5 4 59 6 3 46 7 5 80 8 19 103 9 9 106 10 22 130 11 16 70 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 179 20 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 173 27 plFiberPlate : adding spectro-photo std with objId = 2777 0 5 164 107 plFiberPlate : adding spectro-photo std with objId = 2777 0 2 148 17 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 147 167 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 158 28 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 161 25 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 164 84 plFiberPlate : 106 possible sky positions to use as objects from a possible 435. plFiberPlate : 82 possible sky positions to use as objects from a possible 434. plFiberPlate : 59 possible sky positions to use as objects from a possible 433. plFiberPlate : 30 possible sky positions to use as objects from a possible 432. plFiberPlate : 32 possible sky positions to use as objects from a possible 431. plFiberPlate : 20 possible sky positions to use as objects from a possible 430. plFiberPlate : 32 possible sky positions to use as objects from a possible 429. plFiberPlate : 52 possible sky positions to use as objects from a possible 428. plFiberPlate : 40 possible sky positions to use as objects from a possible 427. plFiberPlate : 25 possible sky positions to use as objects from a possible 426. plFiberPlate : 19 possible sky positions to use as objects from a possible 425. plFiberPlate : 12 possible sky positions to use as objects from a possible 424. plFiberPlate : 14 possible sky positions to use as objects from a possible 423. plFiberPlate : 11 possible sky positions to use as objects from a possible 422. plFiberPlate : 6 possible sky positions to use as objects from a possible 421. plFiberPlate : 3 possible sky positions to use as objects from a possible 420. plFiberPlate : 47 possible sky positions to use as objects from a possible 419. plFiberPlate : 44 possible sky positions to use as objects from a possible 418. plFiberPlate : 23 possible sky positions to use as objects from a possible 417. plFiberPlate : 16 possible sky positions to use as objects from a possible 416. plFiberPlate : 10 possible sky positions to use as objects from a possible 415. plFiberPlate : 15 possible sky positions to use as objects from a possible 414. plFiberPlate : 10 possible sky positions to use as objects from a possible 413. plFiberPlate : 7 possible sky positions to use as objects from a possible 412. plFiberPlate : 18 possible sky positions to use as objects from a possible 411. plFiberPlate : 18 possible sky positions to use as objects from a possible 410. plFiberPlate : 9 possible sky positions to use as objects from a possible 409. plFiberPlate : 8 possible sky positions to use as objects from a possible 408. plFiberPlate : 8 possible sky positions to use as objects from a possible 407. plFiberPlate : 13 possible sky positions to use as objects from a possible 406. plFiberPlate : 18 possible sky positions to use as objects from a possible 405. plFiberPlate : 14 possible sky positions to use as objects from a possible 404. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0827.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0828.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0828.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0829.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 54 2 11 48 3 22 86 4 21 106 5 10 58 6 1 54 7 5 97 8 14 94 9 6 107 10 27 130 11 17 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 178 68 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 173 32 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 164 66 plFiberPlate : adding spectro-photo std with objId = 2777 0 5 164 107 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 184 38 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 194 10 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 161 25 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 176 74 plFiberPlate : 111 possible sky positions to use as objects from a possible 442. plFiberPlate : 105 possible sky positions to use as objects from a possible 441. plFiberPlate : 51 possible sky positions to use as objects from a possible 440. plFiberPlate : 27 possible sky positions to use as objects from a possible 439. plFiberPlate : 27 possible sky positions to use as objects from a possible 438. plFiberPlate : 8 possible sky positions to use as objects from a possible 437. plFiberPlate : 22 possible sky positions to use as objects from a possible 436. plFiberPlate : 46 possible sky positions to use as objects from a possible 435. plFiberPlate : 41 possible sky positions to use as objects from a possible 434. plFiberPlate : 14 possible sky positions to use as objects from a possible 433. plFiberPlate : 6 possible sky positions to use as objects from a possible 432. plFiberPlate : 8 possible sky positions to use as objects from a possible 431. plFiberPlate : 6 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 4 possible sky positions to use as objects from a possible 428. plFiberPlate : 6 possible sky positions to use as objects from a possible 427. plFiberPlate : 31 possible sky positions to use as objects from a possible 426. plFiberPlate : 37 possible sky positions to use as objects from a possible 425. plFiberPlate : 32 possible sky positions to use as objects from a possible 424. plFiberPlate : 23 possible sky positions to use as objects from a possible 423. plFiberPlate : 12 possible sky positions to use as objects from a possible 422. plFiberPlate : 9 possible sky positions to use as objects from a possible 421. plFiberPlate : 6 possible sky positions to use as objects from a possible 420. plFiberPlate : 15 possible sky positions to use as objects from a possible 419. plFiberPlate : 12 possible sky positions to use as objects from a possible 418. plFiberPlate : 20 possible sky positions to use as objects from a possible 417. plFiberPlate : 8 possible sky positions to use as objects from a possible 416. plFiberPlate : 6 possible sky positions to use as objects from a possible 415. plFiberPlate : 24 possible sky positions to use as objects from a possible 414. plFiberPlate : 15 possible sky positions to use as objects from a possible 413. plFiberPlate : 22 possible sky positions to use as objects from a possible 412. plFiberPlate : 21 possible sky positions to use as objects from a possible 411. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0828.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0829.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0829.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0830.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 68 2 6 48 3 11 94 4 11 125 5 6 77 6 5 48 7 13 85 8 15 110 9 12 99 10 18 146 11 12 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 196 54 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 207 42 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 206 2 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 195 120 plFiberPlate : adding spectro-photo std with objId = 2777 0 5 178 71 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 194 10 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 202 123 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 176 74 plFiberPlate : 143 possible sky positions to use as objects from a possible 488. plFiberPlate : 115 possible sky positions to use as objects from a possible 487. plFiberPlate : 88 possible sky positions to use as objects from a possible 486. plFiberPlate : 30 possible sky positions to use as objects from a possible 485. plFiberPlate : 20 possible sky positions to use as objects from a possible 484. plFiberPlate : 17 possible sky positions to use as objects from a possible 483. plFiberPlate : 28 possible sky positions to use as objects from a possible 482. plFiberPlate : 72 possible sky positions to use as objects from a possible 481. plFiberPlate : 32 possible sky positions to use as objects from a possible 480. plFiberPlate : 20 possible sky positions to use as objects from a possible 479. plFiberPlate : 5 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : 12 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 7 possible sky positions to use as objects from a possible 474. plFiberPlate : 13 possible sky positions to use as objects from a possible 473. plFiberPlate : 63 possible sky positions to use as objects from a possible 472. plFiberPlate : 35 possible sky positions to use as objects from a possible 471. plFiberPlate : 14 possible sky positions to use as objects from a possible 470. plFiberPlate : 2 possible sky positions to use as objects from a possible 469. plFiberPlate : 5 possible sky positions to use as objects from a possible 468. plFiberPlate : 2 possible sky positions to use as objects from a possible 467. plFiberPlate : 5 possible sky positions to use as objects from a possible 466. plFiberPlate : 5 possible sky positions to use as objects from a possible 465. plFiberPlate : 24 possible sky positions to use as objects from a possible 464. plFiberPlate : 11 possible sky positions to use as objects from a possible 463. plFiberPlate : 11 possible sky positions to use as objects from a possible 462. plFiberPlate : 1 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 25 possible sky positions to use as objects from a possible 459. plFiberPlate : 17 possible sky positions to use as objects from a possible 458. plFiberPlate : 12 possible sky positions to use as objects from a possible 457. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0829.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0830.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0830.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0831.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 62 2 16 44 3 16 94 4 18 119 5 8 75 6 8 52 7 12 81 8 13 101 9 11 123 10 25 142 11 21 70 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 210 9 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 190 35 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 218 16 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 206 2 plFiberPlate : adding spectro-photo std with objId = 2777 0 5 202 8 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 215 54 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 195 27 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 221 45 plFiberPlate : 122 possible sky positions to use as objects from a possible 484. plFiberPlate : 104 possible sky positions to use as objects from a possible 483. plFiberPlate : 47 possible sky positions to use as objects from a possible 482. plFiberPlate : 17 possible sky positions to use as objects from a possible 481. plFiberPlate : 19 possible sky positions to use as objects from a possible 480. plFiberPlate : 9 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 86 possible sky positions to use as objects from a possible 477. plFiberPlate : 72 possible sky positions to use as objects from a possible 476. plFiberPlate : 40 possible sky positions to use as objects from a possible 475. plFiberPlate : 27 possible sky positions to use as objects from a possible 474. plFiberPlate : 12 possible sky positions to use as objects from a possible 473. plFiberPlate : 6 possible sky positions to use as objects from a possible 472. plFiberPlate : 8 possible sky positions to use as objects from a possible 471. plFiberPlate : 17 possible sky positions to use as objects from a possible 470. plFiberPlate : 5 possible sky positions to use as objects from a possible 469. plFiberPlate : 35 possible sky positions to use as objects from a possible 468. plFiberPlate : 45 possible sky positions to use as objects from a possible 467. plFiberPlate : 33 possible sky positions to use as objects from a possible 466. plFiberPlate : 21 possible sky positions to use as objects from a possible 465. plFiberPlate : 20 possible sky positions to use as objects from a possible 464. plFiberPlate : 14 possible sky positions to use as objects from a possible 463. plFiberPlate : 6 possible sky positions to use as objects from a possible 462. plFiberPlate : 1 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : 32 possible sky positions to use as objects from a possible 459. plFiberPlate : 23 possible sky positions to use as objects from a possible 458. plFiberPlate : 28 possible sky positions to use as objects from a possible 457. plFiberPlate : 13 possible sky positions to use as objects from a possible 456. plFiberPlate : 14 possible sky positions to use as objects from a possible 455. plFiberPlate : 6 possible sky positions to use as objects from a possible 454. plFiberPlate : 18 possible sky positions to use as objects from a possible 453. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0830.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0831.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0831.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0832.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 83 2 10 55 3 12 78 4 19 104 5 12 68 6 8 45 7 8 81 8 15 97 9 10 95 10 24 133 11 17 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 223 47 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 217 35 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 222 51 plFiberPlate : adding spectro-photo std with objId = 2777 0 1 207 41 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 213 42 plFiberPlate : adding spectro-photo std with objId = 2740 0 4 221 45 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 235 16 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 237 19 plFiberPlate : 112 possible sky positions to use as objects from a possible 456. plFiberPlate : 91 possible sky positions to use as objects from a possible 455. plFiberPlate : 66 possible sky positions to use as objects from a possible 454. plFiberPlate : 43 possible sky positions to use as objects from a possible 453. plFiberPlate : 23 possible sky positions to use as objects from a possible 452. plFiberPlate : 30 possible sky positions to use as objects from a possible 451. plFiberPlate : 25 possible sky positions to use as objects from a possible 450. plFiberPlate : 63 possible sky positions to use as objects from a possible 449. plFiberPlate : 37 possible sky positions to use as objects from a possible 448. plFiberPlate : 21 possible sky positions to use as objects from a possible 447. plFiberPlate : 12 possible sky positions to use as objects from a possible 446. plFiberPlate : 9 possible sky positions to use as objects from a possible 445. plFiberPlate : 9 possible sky positions to use as objects from a possible 444. plFiberPlate : 6 possible sky positions to use as objects from a possible 443. plFiberPlate : 10 possible sky positions to use as objects from a possible 442. plFiberPlate : 17 possible sky positions to use as objects from a possible 441. plFiberPlate : 48 possible sky positions to use as objects from a possible 440. plFiberPlate : 40 possible sky positions to use as objects from a possible 439. plFiberPlate : 28 possible sky positions to use as objects from a possible 438. plFiberPlate : 21 possible sky positions to use as objects from a possible 437. plFiberPlate : 16 possible sky positions to use as objects from a possible 436. plFiberPlate : 15 possible sky positions to use as objects from a possible 435. plFiberPlate : 3 possible sky positions to use as objects from a possible 434. plFiberPlate : 10 possible sky positions to use as objects from a possible 433. plFiberPlate : 18 possible sky positions to use as objects from a possible 432. plFiberPlate : 17 possible sky positions to use as objects from a possible 431. plFiberPlate : 14 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 21 possible sky positions to use as objects from a possible 428. plFiberPlate : 13 possible sky positions to use as objects from a possible 427. plFiberPlate : 18 possible sky positions to use as objects from a possible 426. plFiberPlate : 6 possible sky positions to use as objects from a possible 425. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0831.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0832.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0832.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0833.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 91 2 15 47 3 19 84 4 18 111 5 12 84 6 6 60 7 13 88 8 26 117 9 16 99 10 30 143 11 18 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2777 0 1 231 43 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 242 6 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 253 45 plFiberPlate : adding spectro-photo std with objId = 2740 0 5 240 35 plFiberPlate : adding spectro-photo std with objId = 2740 0 3 248 39 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 249 7 plFiberPlate : adding spectro-photo std with objId = 2777 0 5 224 14 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 248 59 plFiberPlate : 127 possible sky positions to use as objects from a possible 513. plFiberPlate : 83 possible sky positions to use as objects from a possible 512. plFiberPlate : 50 possible sky positions to use as objects from a possible 511. plFiberPlate : 30 possible sky positions to use as objects from a possible 510. plFiberPlate : 4 possible sky positions to use as objects from a possible 509. plFiberPlate : 16 possible sky positions to use as objects from a possible 508. plFiberPlate : 50 possible sky positions to use as objects from a possible 507. plFiberPlate : 75 possible sky positions to use as objects from a possible 506. plFiberPlate : 42 possible sky positions to use as objects from a possible 505. plFiberPlate : 25 possible sky positions to use as objects from a possible 504. plFiberPlate : 15 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 4 possible sky positions to use as objects from a possible 501. plFiberPlate : 12 possible sky positions to use as objects from a possible 500. plFiberPlate : 18 possible sky positions to use as objects from a possible 499. plFiberPlate : 34 possible sky positions to use as objects from a possible 498. plFiberPlate : 60 possible sky positions to use as objects from a possible 497. plFiberPlate : 42 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : 21 possible sky positions to use as objects from a possible 494. plFiberPlate : 19 possible sky positions to use as objects from a possible 493. plFiberPlate : 19 possible sky positions to use as objects from a possible 492. plFiberPlate : 5 possible sky positions to use as objects from a possible 491. plFiberPlate : 17 possible sky positions to use as objects from a possible 490. plFiberPlate : 26 possible sky positions to use as objects from a possible 489. plFiberPlate : 22 possible sky positions to use as objects from a possible 488. plFiberPlate : 13 possible sky positions to use as objects from a possible 487. plFiberPlate : 11 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : 6 possible sky positions to use as objects from a possible 484. plFiberPlate : 20 possible sky positions to use as objects from a possible 483. plFiberPlate : 19 possible sky positions to use as objects from a possible 482. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0832.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0833.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0833.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.1/plPlugMapP-0834.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 93 2 21 70 3 20 97 4 19 115 5 9 81 6 6 40 7 3 64 8 9 70 9 16 105 10 37 168 11 26 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2777 0 2 237 56 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 263 6 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 265 4 plFiberPlate : adding spectro-photo std with objId = 2777 0 6 241 40 plFiberPlate : adding spectro-photo std with objId = 2777 0 4 247 71 plFiberPlate : adding spectro-photo std with objId = 2740 0 6 265 7 plFiberPlate : adding spectro-photo std with objId = 2740 0 2 258 68 plFiberPlate : adding spectro-photo std with objId = 2777 0 3 245 40 plFiberPlate : 115 possible sky positions to use as objects from a possible 485. plFiberPlate : 101 possible sky positions to use as objects from a possible 484. plFiberPlate : 87 possible sky positions to use as objects from a possible 483. plFiberPlate : 54 possible sky positions to use as objects from a possible 482. plFiberPlate : 31 possible sky positions to use as objects from a possible 481. plFiberPlate : 44 possible sky positions to use as objects from a possible 480. plFiberPlate : 42 possible sky positions to use as objects from a possible 479. plFiberPlate : 78 possible sky positions to use as objects from a possible 478. plFiberPlate : 62 possible sky positions to use as objects from a possible 477. plFiberPlate : 47 possible sky positions to use as objects from a possible 476. plFiberPlate : 23 possible sky positions to use as objects from a possible 475. plFiberPlate : 21 possible sky positions to use as objects from a possible 474. plFiberPlate : 13 possible sky positions to use as objects from a possible 473. plFiberPlate : 18 possible sky positions to use as objects from a possible 472. plFiberPlate : 7 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 55 possible sky positions to use as objects from a possible 469. plFiberPlate : 52 possible sky positions to use as objects from a possible 468. plFiberPlate : 36 possible sky positions to use as objects from a possible 467. plFiberPlate : 26 possible sky positions to use as objects from a possible 466. plFiberPlate : 10 possible sky positions to use as objects from a possible 465. plFiberPlate : 19 possible sky positions to use as objects from a possible 464. plFiberPlate : 3 possible sky positions to use as objects from a possible 463. plFiberPlate : 8 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : 16 possible sky positions to use as objects from a possible 460. plFiberPlate : 10 possible sky positions to use as objects from a possible 459. plFiberPlate : 10 possible sky positions to use as objects from a possible 458. plFiberPlate : 8 possible sky positions to use as objects from a possible 457. plFiberPlate : 7 possible sky positions to use as objects from a possible 456. plFiberPlate : 10 possible sky positions to use as objects from a possible 455. plFiberPlate : 10 possible sky positions to use as objects from a possible 454. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0833.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0834.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.1/plOverlay-0834.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Jan 2 12:14:18 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_48/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_48 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 10 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0825.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.9717,-11.7207) and (-4.17,-12.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0825.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0825.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0826.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.1330,9.8447) and (6.08,10.60) plMakeFanucCodes : fixed path between (5.9066,11.3431) and (5.25,11.53) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0826.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.9076,8.5526) and (11.80,2.70) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0826.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0827.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.2628,10.5288) and (6.27,10.82) plMakeFanucCodes : fixed path between (5.2082,11.6864) and (4.48,11.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0827.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0827.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0828.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0828.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0828.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0829.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7615,-6.9260) and (-11.21,-5.64) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0829.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0829.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0830.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0830.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0830.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0831.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.3580,-11.4235) and (-4.25,-12.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0831.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0831.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0832.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0832.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0832.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0833.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0833.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0833.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0834.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0834.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.1/plFanuc-0834.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Jan 2 12:14:47 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_48/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_48 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e1f1e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 10 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 825 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 826 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 827 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 828 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 829 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 830 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 831 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 832 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 833 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 834 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.6 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Jan 2 12:15:02 CST 2002 Begin running plateEnder dr2002.01.1 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_48/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_48 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Jan 2 12:15:36 CST 2002 ALL DONE PS: Read file for stderr output of this job.