Sender: LSF System Subject: Job 43425: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Apr 17 17:47:00 2002 Results reported at Wed Apr 17 17:49:56 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v13_34 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.04.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 155.31 sec. Max Memory : 8 MB Max Swap : 46 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Wed Apr 17 17:47:02 CDT 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Apr 17 17:47:06 CDT 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_17/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v13_34/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_9/OSF1/bin:/sdss/ups/prd/sdssmath/v5_6/OSF1/bin:/sdss/ups/prd/astrotools/v5_8/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed Apr 17 17:47:06 CDT 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_8/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_9/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v13_34/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_17/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_9/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_2/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_6/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a --------------------------------------------------------------- Wed Apr 17 17:47:06 CDT 2002 Begin running plate --------------------------------------------------------------- Wed Apr 17 17:47:06 CDT 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e61368 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0733.par makePlates : plateInfo struct for plate 961 : (h2).mjd 52613 (h2).raCen 157.3239 (h2).decCen 46.52145 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.324 46.521 157.324 48.021 plMakePlateFromTile : mjd of obs : 52613.875143 Observed HA/dec of plate center, fiducial point (deg) : -22.002 46.501 -22.002 48.001 The rotation angle of the fid. point is 121.470954 plMakePlateFromTile : beginning loop over 1288 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0734.par makePlates : plateInfo struct for plate 962 : (h2).mjd 52613 (h2).raCen 160.1665 (h2).decCen 47.28401 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 160.167 47.284 160.167 48.784 plMakePlateFromTile : mjd of obs : 52613.874700 Observed HA/dec of plate center, fiducial point (deg) : -25.002 47.263 -25.002 48.763 The rotation angle of the fid. point is 118.412434 plMakePlateFromTile : beginning loop over 1301 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0735.par makePlates : plateInfo struct for plate 963 : (h2).mjd 52613 (h2).raCen 163.2138 (h2).decCen 47.90239 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.214 47.902 163.214 49.402 plMakePlateFromTile : mjd of obs : 52613.874825 Observed HA/dec of plate center, fiducial point (deg) : -28.002 47.881 -28.002 49.381 The rotation angle of the fid. point is 115.407676 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0736.par makePlates : plateInfo struct for plate 964 : (h2).mjd 52613 (h2).raCen 166.407 (h2).decCen 48.43811 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.407 48.438 166.407 49.938 plMakePlateFromTile : mjd of obs : 52613.875352 Observed HA/dec of plate center, fiducial point (deg) : -31.002 48.417 -31.002 49.916 The rotation angle of the fid. point is 112.532238 plMakePlateFromTile : beginning loop over 1303 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0737.par makePlates : plateInfo struct for plate 965 : (h2).mjd 52613 (h2).raCen 169.4818 (h2).decCen 48.96104 (h2).haCen -34 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.482 48.961 169.482 50.461 plMakePlateFromTile : mjd of obs : 52613.875552 Observed HA/dec of plate center, fiducial point (deg) : -34.002 48.940 -34.002 50.439 The rotation angle of the fid. point is 109.862419 plMakePlateFromTile : beginning loop over 1287 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0738.par makePlates : plateInfo struct for plate 966 : (h2).mjd 52613 (h2).raCen 172.3999 (h2).decCen 49.27633 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.400 49.276 172.400 50.776 plMakePlateFromTile : mjd of obs : 52613.916889 Observed HA/dec of plate center, fiducial point (deg) : -22.002 49.254 -22.002 50.753 The rotation angle of the fid. point is 126.975461 plMakePlateFromTile : beginning loop over 1309 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0739.par makePlates : plateInfo struct for plate 967 : (h2).mjd 52613 (h2).raCen 175.4663 (h2).decCen 49.64 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.466 49.640 175.466 51.140 plMakePlateFromTile : mjd of obs : 52613.917065 Observed HA/dec of plate center, fiducial point (deg) : -25.002 49.617 -25.002 51.117 The rotation angle of the fid. point is 122.864899 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0740.par makePlates : plateInfo struct for plate 968 : (h2).mjd 52613 (h2).raCen 178.737 (h2).decCen 49.79871 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.737 49.799 178.737 51.299 plMakePlateFromTile : mjd of obs : 52613.917807 Observed HA/dec of plate center, fiducial point (deg) : -28.002 49.776 -28.002 51.276 The rotation angle of the fid. point is 118.805948 plMakePlateFromTile : beginning loop over 1279 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0741.par makePlates : plateInfo struct for plate 969 : (h2).mjd 52613 (h2).raCen 181.2526 (h2).decCen 49.91474 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.253 49.915 181.253 51.415 plMakePlateFromTile : mjd of obs : 52613.916459 Observed HA/dec of plate center, fiducial point (deg) : -31.002 49.893 -31.002 51.392 The rotation angle of the fid. point is 115.036516 plMakePlateFromTile : beginning loop over 1282 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0742.par makePlates : plateInfo struct for plate 970 : (h2).mjd 52613 (h2).raCen 183.9774 (h2).decCen 50.01205 (h2).haCen -33 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.977 50.012 183.977 51.512 plMakePlateFromTile : mjd of obs : 52613.918460 Observed HA/dec of plate center, fiducial point (deg) : -33.002 49.990 -33.002 51.489 The rotation angle of the fid. point is 112.728881 plMakePlateFromTile : beginning loop over 1287 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk40/complete//plPlugMapT-0743.par makePlates : plateInfo struct for plate 971 : (h2).mjd 52613 (h2).raCen 186.9559 (h2).decCen 50.03827 (h2).haCen -36 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.956 50.038 186.956 51.538 plMakePlateFromTile : mjd of obs : 52613.918393 Observed HA/dec of plate center, fiducial point (deg) : -36.002 50.017 -36.002 51.516 The rotation angle of the fid. point is 109.303023 plMakePlateFromTile : beginning loop over 1172 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Apr 17 17:47:36 CDT 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 11 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0961.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 105 2 4 65 3 9 83 4 14 129 5 10 118 6 7 93 7 2 100 8 12 125 9 5 115 10 11 153 11 6 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 27 14 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 25 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 2 31 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 35 33 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 297 29 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 25 22 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 204 30 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 31 11 plFiberPlate : 139 possible sky positions to use as objects from a possible 606. plFiberPlate : 53 possible sky positions to use as objects from a possible 605. plFiberPlate : 32 possible sky positions to use as objects from a possible 604. plFiberPlate : 36 possible sky positions to use as objects from a possible 603. plFiberPlate : 31 possible sky positions to use as objects from a possible 602. plFiberPlate : 35 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 84 possible sky positions to use as objects from a possible 599. plFiberPlate : 44 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 6 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 3 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 40 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 5 possible sky positions to use as objects from a possible 584. plFiberPlate : 24 possible sky positions to use as objects from a possible 583. plFiberPlate : 30 possible sky positions to use as objects from a possible 582. plFiberPlate : 39 possible sky positions to use as objects from a possible 581. plFiberPlate : 20 possible sky positions to use as objects from a possible 580. plFiberPlate : 29 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 7 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : 35 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0961.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0961.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0962.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 125 2 10 85 3 12 86 4 8 99 5 3 122 6 7 106 7 7 105 8 6 119 9 6 127 10 17 156 11 11 120 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 35 33 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 210 15 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 217 16 plFiberPlate : adding spectro-photo std with objId = 3059 0 2 38 13 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 204 30 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 42 98 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 49 2 plFiberPlate : adding spectro-photo std with objId = 2964 0 6 205 40 plFiberPlate : 123 possible sky positions to use as objects from a possible 621. plFiberPlate : 95 possible sky positions to use as objects from a possible 620. plFiberPlate : 70 possible sky positions to use as objects from a possible 619. plFiberPlate : 47 possible sky positions to use as objects from a possible 618. plFiberPlate : 35 possible sky positions to use as objects from a possible 617. plFiberPlate : 33 possible sky positions to use as objects from a possible 616. plFiberPlate : 47 possible sky positions to use as objects from a possible 615. plFiberPlate : 82 possible sky positions to use as objects from a possible 614. plFiberPlate : 56 possible sky positions to use as objects from a possible 613. plFiberPlate : 46 possible sky positions to use as objects from a possible 612. plFiberPlate : 29 possible sky positions to use as objects from a possible 611. plFiberPlate : 17 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 13 possible sky positions to use as objects from a possible 608. plFiberPlate : 22 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 69 possible sky positions to use as objects from a possible 605. plFiberPlate : 55 possible sky positions to use as objects from a possible 604. plFiberPlate : 40 possible sky positions to use as objects from a possible 603. plFiberPlate : 32 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 15 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 32 possible sky positions to use as objects from a possible 597. plFiberPlate : 52 possible sky positions to use as objects from a possible 596. plFiberPlate : 51 possible sky positions to use as objects from a possible 595. plFiberPlate : 37 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 25 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0961.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0962.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0962.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0963.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 118 2 8 72 3 9 80 4 6 109 5 6 149 6 10 100 7 8 91 8 10 113 9 7 91 10 21 149 11 16 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 235 36 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 61 6 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 220 26 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 51 2 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 49 2 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 65 10 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 232 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 51 80 plFiberPlate : 138 possible sky positions to use as objects from a possible 600. plFiberPlate : 79 possible sky positions to use as objects from a possible 599. plFiberPlate : 61 possible sky positions to use as objects from a possible 598. plFiberPlate : 38 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 48 possible sky positions to use as objects from a possible 595. plFiberPlate : 58 possible sky positions to use as objects from a possible 594. plFiberPlate : 86 possible sky positions to use as objects from a possible 593. plFiberPlate : 73 possible sky positions to use as objects from a possible 592. plFiberPlate : 44 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 9 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 26 possible sky positions to use as objects from a possible 585. plFiberPlate : 107 possible sky positions to use as objects from a possible 584. plFiberPlate : 75 possible sky positions to use as objects from a possible 583. plFiberPlate : 42 possible sky positions to use as objects from a possible 582. plFiberPlate : 27 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 7 possible sky positions to use as objects from a possible 578. plFiberPlate : 11 possible sky positions to use as objects from a possible 577. plFiberPlate : 36 possible sky positions to use as objects from a possible 576. plFiberPlate : 35 possible sky positions to use as objects from a possible 575. plFiberPlate : 24 possible sky positions to use as objects from a possible 574. plFiberPlate : 8 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 1 possible sky positions to use as objects from a possible 571. plFiberPlate : 7 possible sky positions to use as objects from a possible 570. plFiberPlate : 27 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0962.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0963.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0963.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0964.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 116 2 7 78 3 5 80 4 10 111 5 8 128 6 6 111 7 8 108 8 6 122 9 3 112 10 12 157 11 13 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 67 67 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 243 21 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 232 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 65 10 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 235 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 67 12 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 69 27 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 239 26 plFiberPlate : 121 possible sky positions to use as objects from a possible 619. plFiberPlate : 108 possible sky positions to use as objects from a possible 618. plFiberPlate : 73 possible sky positions to use as objects from a possible 617. plFiberPlate : 47 possible sky positions to use as objects from a possible 616. plFiberPlate : 25 possible sky positions to use as objects from a possible 615. plFiberPlate : 28 possible sky positions to use as objects from a possible 614. plFiberPlate : 64 possible sky positions to use as objects from a possible 613. plFiberPlate : 79 possible sky positions to use as objects from a possible 612. plFiberPlate : 42 possible sky positions to use as objects from a possible 611. plFiberPlate : 25 possible sky positions to use as objects from a possible 610. plFiberPlate : 13 possible sky positions to use as objects from a possible 609. plFiberPlate : 10 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 5 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 91 possible sky positions to use as objects from a possible 603. plFiberPlate : 55 possible sky positions to use as objects from a possible 602. plFiberPlate : 21 possible sky positions to use as objects from a possible 601. plFiberPlate : 4 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 9 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 14 possible sky positions to use as objects from a possible 596. plFiberPlate : 31 possible sky positions to use as objects from a possible 595. plFiberPlate : 42 possible sky positions to use as objects from a possible 594. plFiberPlate : 48 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 13 possible sky positions to use as objects from a possible 590. plFiberPlate : 29 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0963.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0964.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0964.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0965.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 98 2 5 65 3 13 91 4 13 138 5 9 143 6 11 109 7 9 101 8 9 104 9 7 117 10 14 143 11 6 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 254 35 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 84 16 plFiberPlate : adding spectro-photo std with objId = 2964 0 6 255 14 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 259 42 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 246 57 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 250 48 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 82 6 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 92 6 plFiberPlate : 145 possible sky positions to use as objects from a possible 608. plFiberPlate : 46 possible sky positions to use as objects from a possible 607. plFiberPlate : 47 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 3 possible sky positions to use as objects from a possible 604. plFiberPlate : 20 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 95 possible sky positions to use as objects from a possible 601. plFiberPlate : 23 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : 19 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 10 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 89 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 23 possible sky positions to use as objects from a possible 590. plFiberPlate : 2 possible sky positions to use as objects from a possible 589. plFiberPlate : 16 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 19 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 47 possible sky positions to use as objects from a possible 583. plFiberPlate : 19 possible sky positions to use as objects from a possible 582. plFiberPlate : 20 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 7 possible sky positions to use as objects from a possible 579. plFiberPlate : 4 possible sky positions to use as objects from a possible 578. plFiberPlate : 12 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0964.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0965.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0965.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0966.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 116 2 7 81 3 7 88 4 11 116 5 8 138 6 5 116 7 7 104 8 5 120 9 5 127 10 20 150 11 11 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 274 2 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 101 11 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 273 22 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 259 42 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 104 17 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 92 6 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 105 9 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 98 14 plFiberPlate : 131 possible sky positions to use as objects from a possible 637. plFiberPlate : 65 possible sky positions to use as objects from a possible 636. plFiberPlate : 37 possible sky positions to use as objects from a possible 635. plFiberPlate : 25 possible sky positions to use as objects from a possible 634. plFiberPlate : 16 possible sky positions to use as objects from a possible 633. plFiberPlate : 36 possible sky positions to use as objects from a possible 632. plFiberPlate : 41 possible sky positions to use as objects from a possible 631. plFiberPlate : 55 possible sky positions to use as objects from a possible 630. plFiberPlate : 35 possible sky positions to use as objects from a possible 629. plFiberPlate : 14 possible sky positions to use as objects from a possible 628. plFiberPlate : 10 possible sky positions to use as objects from a possible 627. plFiberPlate : 4 possible sky positions to use as objects from a possible 626. plFiberPlate : 9 possible sky positions to use as objects from a possible 625. plFiberPlate : 9 possible sky positions to use as objects from a possible 624. plFiberPlate : 7 possible sky positions to use as objects from a possible 623. plFiberPlate : 15 possible sky positions to use as objects from a possible 622. plFiberPlate : 90 possible sky positions to use as objects from a possible 621. plFiberPlate : 63 possible sky positions to use as objects from a possible 620. plFiberPlate : 30 possible sky positions to use as objects from a possible 619. plFiberPlate : 19 possible sky positions to use as objects from a possible 618. plFiberPlate : 12 possible sky positions to use as objects from a possible 617. plFiberPlate : 6 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 16 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 53 possible sky positions to use as objects from a possible 612. plFiberPlate : 38 possible sky positions to use as objects from a possible 611. plFiberPlate : 15 possible sky positions to use as objects from a possible 610. plFiberPlate : 10 possible sky positions to use as objects from a possible 609. plFiberPlate : 7 possible sky positions to use as objects from a possible 608. plFiberPlate : 26 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0965.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0966.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0966.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0967.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 125 2 9 80 3 10 83 4 7 108 5 7 131 6 13 100 7 11 96 8 4 114 9 9 124 10 17 158 11 10 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 112 21 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 114 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 113 26 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 288 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 114 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 105 9 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 283 51 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 120 50 plFiberPlate : 137 possible sky positions to use as objects from a possible 624. plFiberPlate : 81 possible sky positions to use as objects from a possible 623. plFiberPlate : 58 possible sky positions to use as objects from a possible 622. plFiberPlate : 35 possible sky positions to use as objects from a possible 621. plFiberPlate : 25 possible sky positions to use as objects from a possible 620. plFiberPlate : 36 possible sky positions to use as objects from a possible 619. plFiberPlate : 62 possible sky positions to use as objects from a possible 618. plFiberPlate : 95 possible sky positions to use as objects from a possible 617. plFiberPlate : 78 possible sky positions to use as objects from a possible 616. plFiberPlate : 74 possible sky positions to use as objects from a possible 615. plFiberPlate : 60 possible sky positions to use as objects from a possible 614. plFiberPlate : 39 possible sky positions to use as objects from a possible 613. plFiberPlate : 20 possible sky positions to use as objects from a possible 612. plFiberPlate : 24 possible sky positions to use as objects from a possible 611. plFiberPlate : 16 possible sky positions to use as objects from a possible 610. plFiberPlate : 50 possible sky positions to use as objects from a possible 609. plFiberPlate : 65 possible sky positions to use as objects from a possible 608. plFiberPlate : 49 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 13 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 15 possible sky positions to use as objects from a possible 600. plFiberPlate : 56 possible sky positions to use as objects from a possible 599. plFiberPlate : 59 possible sky positions to use as objects from a possible 598. plFiberPlate : 48 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 36 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 25 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0966.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0967.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0967.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0968.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 99 2 10 61 3 6 75 4 7 129 5 6 136 6 6 94 7 12 91 8 12 104 9 10 103 10 18 147 11 13 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 293 20 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 289 55 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 121 28 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 131 6 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 296 14 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 288 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 130 8 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 120 50 plFiberPlate : 140 possible sky positions to use as objects from a possible 593. plFiberPlate : 64 possible sky positions to use as objects from a possible 592. plFiberPlate : 34 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 30 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 51 possible sky positions to use as objects from a possible 587. plFiberPlate : 88 possible sky positions to use as objects from a possible 586. plFiberPlate : 28 possible sky positions to use as objects from a possible 585. plFiberPlate : 16 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 25 possible sky positions to use as objects from a possible 581. plFiberPlate : 11 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 25 possible sky positions to use as objects from a possible 578. plFiberPlate : 93 possible sky positions to use as objects from a possible 577. plFiberPlate : 35 possible sky positions to use as objects from a possible 576. plFiberPlate : 19 possible sky positions to use as objects from a possible 575. plFiberPlate : 1 possible sky positions to use as objects from a possible 574. plFiberPlate : 18 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 5 possible sky positions to use as objects from a possible 571. plFiberPlate : 21 possible sky positions to use as objects from a possible 570. plFiberPlate : 14 possible sky positions to use as objects from a possible 569. plFiberPlate : 39 possible sky positions to use as objects from a possible 568. plFiberPlate : 47 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 13 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 23 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0967.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0968.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0968.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0969.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 119 2 4 74 3 9 73 4 11 108 5 9 131 6 9 100 7 10 96 8 13 111 9 6 108 10 13 142 11 6 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 133 76 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 139 6 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 144 17 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 132 21 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 131 6 plFiberPlate : adding spectro-photo std with objId = 3059 0 2 142 57 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 146 2 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 307 8 plFiberPlate : 105 possible sky positions to use as objects from a possible 593. plFiberPlate : 71 possible sky positions to use as objects from a possible 592. plFiberPlate : 25 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : 29 possible sky positions to use as objects from a possible 588. plFiberPlate : 61 possible sky positions to use as objects from a possible 587. plFiberPlate : 92 possible sky positions to use as objects from a possible 586. plFiberPlate : 62 possible sky positions to use as objects from a possible 585. plFiberPlate : 59 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 25 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 26 possible sky positions to use as objects from a possible 578. plFiberPlate : 79 possible sky positions to use as objects from a possible 577. plFiberPlate : 57 possible sky positions to use as objects from a possible 576. plFiberPlate : 40 possible sky positions to use as objects from a possible 575. plFiberPlate : 21 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 5 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 28 possible sky positions to use as objects from a possible 570. plFiberPlate : 11 possible sky positions to use as objects from a possible 569. plFiberPlate : 36 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 12 possible sky positions to use as objects from a possible 566. plFiberPlate : 12 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 9 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0968.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0969.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0969.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0970.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 111 2 6 61 3 8 80 4 13 115 5 9 113 6 7 93 7 9 104 8 8 121 9 9 113 10 17 148 11 13 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 149 50 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 153 2 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 139 6 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 144 17 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 148 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 3 146 2 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 321 43 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 146 23 plFiberPlate : 131 possible sky positions to use as objects from a possible 603. plFiberPlate : 48 possible sky positions to use as objects from a possible 602. plFiberPlate : 30 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 12 possible sky positions to use as objects from a possible 599. plFiberPlate : 20 possible sky positions to use as objects from a possible 598. plFiberPlate : 39 possible sky positions to use as objects from a possible 597. plFiberPlate : 101 possible sky positions to use as objects from a possible 596. plFiberPlate : 62 possible sky positions to use as objects from a possible 595. plFiberPlate : 38 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 4 possible sky positions to use as objects from a possible 592. plFiberPlate : 9 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 88 possible sky positions to use as objects from a possible 587. plFiberPlate : 70 possible sky positions to use as objects from a possible 586. plFiberPlate : 50 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 29 possible sky positions to use as objects from a possible 582. plFiberPlate : 22 possible sky positions to use as objects from a possible 581. plFiberPlate : 26 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 39 possible sky positions to use as objects from a possible 578. plFiberPlate : 24 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 22 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 26 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0969.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0970.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0970.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.1/plPlugMapP-0971.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 62 2 4 69 3 8 83 4 13 121 5 9 132 6 11 103 7 4 78 8 2 50 9 10 100 10 23 141 11 11 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3059 0 1 167 79 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 325 26 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 325 37 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 167 39 plFiberPlate : adding spectro-photo std with objId = 3059 0 5 158 25 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 329 28 plFiberPlate : adding spectro-photo std with objId = 3059 0 6 158 27 plFiberPlate : adding spectro-photo std with objId = 3059 0 4 161 50 plFiberPlate : 133 possible sky positions to use as objects from a possible 498. plFiberPlate : 86 possible sky positions to use as objects from a possible 497. plFiberPlate : 54 possible sky positions to use as objects from a possible 496. plFiberPlate : 34 possible sky positions to use as objects from a possible 495. plFiberPlate : 24 possible sky positions to use as objects from a possible 494. plFiberPlate : 23 possible sky positions to use as objects from a possible 493. plFiberPlate : 12 possible sky positions to use as objects from a possible 492. plFiberPlate : 75 possible sky positions to use as objects from a possible 491. plFiberPlate : 52 possible sky positions to use as objects from a possible 490. plFiberPlate : 38 possible sky positions to use as objects from a possible 489. plFiberPlate : 12 possible sky positions to use as objects from a possible 488. plFiberPlate : 4 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 7 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 76 possible sky positions to use as objects from a possible 482. plFiberPlate : 65 possible sky positions to use as objects from a possible 481. plFiberPlate : 34 possible sky positions to use as objects from a possible 480. plFiberPlate : 10 possible sky positions to use as objects from a possible 479. plFiberPlate : 7 possible sky positions to use as objects from a possible 478. plFiberPlate : 14 possible sky positions to use as objects from a possible 477. plFiberPlate : 14 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 8 possible sky positions to use as objects from a possible 474. plFiberPlate : 32 possible sky positions to use as objects from a possible 473. plFiberPlate : 24 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 6 possible sky positions to use as objects from a possible 468. plFiberPlate : 6 possible sky positions to use as objects from a possible 467. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0970.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0971.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.1/plOverlay-0971.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Apr 17 17:48:11 CDT 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 11 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0961.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0961.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0961.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0962.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0962.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0962.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0963.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0963.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0963.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0964.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0964.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0964.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0965.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2447,5.4378) and (12.02,4.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0965.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0965.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0966.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0966.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0966.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0967.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.8269,10.8205) and (-3.66,12.13) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0967.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0967.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0968.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0968.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0968.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0969.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0969.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0969.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0970.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0970.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0970.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0971.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.4550,-7.1745) and (-11.26,-5.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0971.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.1/plFanuc-0971.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Apr 17 17:48:45 CDT 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e61368 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 11 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 961 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 962 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 963 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 964 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 965 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 966 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 967 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 968 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 969 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 970 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 971 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Apr 17 17:49:02 CDT 2002 Begin running plateEnder dr2002.04.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.04.1 -morePipes 1 failed. PS: Read file for stderr output of this job.