Sender: LSF System Subject: Job 60605: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Sep 11 10:20:52 2002 Results reported at Wed Sep 11 10:22:44 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_39 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.09.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 38.72 sec. Max Memory : 8 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Sep 11 10:20:58 CDT 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Sep 11 10:21:06 CDT 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_19/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_53/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_3/OSF1/bin:/sdss/ups/prd/dp/v14_39/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Wed Sep 11 10:21:06 CDT 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_39/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_19/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_53/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_3/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Wed Sep 11 10:21:06 CDT 2002 Begin running plate --------------------------------------------------------------- Wed Sep 11 10:21:06 CDT 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_39/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_39/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e22f68 makePlates : beginning loop over plObs chain; makePlates : making 2 plates makePlates : making a plate from ./plPlugMapT-9347.par makePlates : plateInfo struct for plate 1156 : (h4).mjd 52555 (h4).raCen 53.5228 (h4).decCen 0.03069378 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 53.523 0.031 53.523 1.531 plMakePlateFromTile : mjd of obs : 52555.865102 Observed HA/dec of plate center, fiducial point (deg) : 20.998 0.053 20.997 1.552 The rotation angle of the fid. point is -29.120203 plMakePlateFromTile : beginning loop over 1276 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9348.par makePlates : plateInfo struct for plate 1157 : (h4).mjd 52555 (h4).raCen 55.49162 (h4).decCen 0.01375204 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 55.492 0.014 55.492 1.514 plMakePlateFromTile : mjd of obs : 52555.865014 Observed HA/dec of plate center, fiducial point (deg) : 18.998 0.036 18.997 1.535 The rotation angle of the fid. point is -26.831295 plMakePlateFromTile : beginning loop over 1176 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Sep 11 10:21:28 CDT 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_39/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_39/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 2 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.09.1/plPlugMapP-1156.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 262 to list of science objects plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : adding sky number 156 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 479 to list of science objects plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 353 to list of science objects plFiberPlate : adding sky number 113 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 41 to list of science objects plFiberPlate : adding sky number 194 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 487 to list of science objects plFiberPlate : adding sky number 265 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 106 2 10 73 3 5 68 4 9 98 5 18 126 6 13 68 7 10 53 8 16 90 9 11 84 10 20 133 11 16 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 518 18 plFiberPlate : adding spectro-photo std with objId = 94 4 6 528 59 plFiberPlate : adding spectro-photo std with objId = 94 4 3 534 48 plFiberPlate : adding spectro-photo std with objId = 125 4 2 426 86 plFiberPlate : adding spectro-photo std with objId = 94 4 2 528 52 plFiberPlate : adding spectro-photo std with objId = 94 4 3 530 61 plFiberPlate : adding spectro-photo std with objId = 94 4 6 526 10 plFiberPlate : adding spectro-photo std with objId = 94 4 1 522 79 plFiberPlate : 104 possible sky positions to use as objects from a possible 494. plFiberPlate : 87 possible sky positions to use as objects from a possible 493. plFiberPlate : 47 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 15 possible sky positions to use as objects from a possible 490. plFiberPlate : 26 possible sky positions to use as objects from a possible 489. plFiberPlate : 57 possible sky positions to use as objects from a possible 488. plFiberPlate : 75 possible sky positions to use as objects from a possible 487. plFiberPlate : 69 possible sky positions to use as objects from a possible 486. plFiberPlate : 55 possible sky positions to use as objects from a possible 485. plFiberPlate : 45 possible sky positions to use as objects from a possible 484. plFiberPlate : 14 possible sky positions to use as objects from a possible 483. plFiberPlate : 8 possible sky positions to use as objects from a possible 482. plFiberPlate : 23 possible sky positions to use as objects from a possible 481. plFiberPlate : 22 possible sky positions to use as objects from a possible 480. plFiberPlate : 27 possible sky positions to use as objects from a possible 479. plFiberPlate : 97 possible sky positions to use as objects from a possible 478. plFiberPlate : 82 possible sky positions to use as objects from a possible 477. plFiberPlate : 49 possible sky positions to use as objects from a possible 476. plFiberPlate : 17 possible sky positions to use as objects from a possible 475. plFiberPlate : 16 possible sky positions to use as objects from a possible 474. plFiberPlate : 6 possible sky positions to use as objects from a possible 473. plFiberPlate : 16 possible sky positions to use as objects from a possible 472. plFiberPlate : 14 possible sky positions to use as objects from a possible 471. plFiberPlate : 27 possible sky positions to use as objects from a possible 470. plFiberPlate : 51 possible sky positions to use as objects from a possible 469. plFiberPlate : 41 possible sky positions to use as objects from a possible 468. plFiberPlate : 18 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : 12 possible sky positions to use as objects from a possible 465. plFiberPlate : 11 possible sky positions to use as objects from a possible 464. plFiberPlate : 15 possible sky positions to use as objects from a possible 463. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.09.1/plOverlay-1156.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.09.1/plOverlay-1156.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.09.1/plPlugMapP-1157.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 320 to list of science objects plFiberPlate : adding sky number 270 to list of science objects plFiberPlate : adding sky number 319 to list of science objects plFiberPlate : adding sky number 324 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 258 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 142 to list of science objects plFiberPlate : adding sky number 376 to list of science objects plFiberPlate : adding sky number 212 to list of science objects plFiberPlate : adding sky number 163 to list of science objects plFiberPlate : adding sky number 246 to list of science objects plFiberPlate : adding sky number 318 to list of science objects plFiberPlate : adding sky number 377 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 63 2 19 66 3 13 73 4 16 97 5 13 89 6 11 61 7 7 59 8 2 51 9 18 94 10 21 125 11 20 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 3 532 12 plFiberPlate : adding spectro-photo std with objId = 94 4 3 531 90 plFiberPlate : adding spectro-photo std with objId = 125 4 5 438 12 plFiberPlate : adding spectro-photo std with objId = 94 4 1 536 7 plFiberPlate : adding spectro-photo std with objId = 94 4 3 530 36 plFiberPlate : adding spectro-photo std with objId = 125 4 2 445 29 plFiberPlate : adding spectro-photo std with objId = 125 4 6 438 59 plFiberPlate : adding spectro-photo std with objId = 94 4 5 545 61 plFiberPlate : 95 possible sky positions to use as objects from a possible 403. plFiberPlate : 49 possible sky positions to use as objects from a possible 402. plFiberPlate : 27 possible sky positions to use as objects from a possible 401. plFiberPlate : 28 possible sky positions to use as objects from a possible 400. plFiberPlate : 19 possible sky positions to use as objects from a possible 399. plFiberPlate : 13 possible sky positions to use as objects from a possible 398. plFiberPlate : 16 possible sky positions to use as objects from a possible 397. plFiberPlate : 64 possible sky positions to use as objects from a possible 396. plFiberPlate : 36 possible sky positions to use as objects from a possible 395. plFiberPlate : 18 possible sky positions to use as objects from a possible 394. plFiberPlate : 11 possible sky positions to use as objects from a possible 393. plFiberPlate : 14 possible sky positions to use as objects from a possible 392. plFiberPlate : 4 possible sky positions to use as objects from a possible 391. plFiberPlate : 10 possible sky positions to use as objects from a possible 390. plFiberPlate : 2 possible sky positions to use as objects from a possible 389. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 388. plFiberPlate: No sky found for bundle at 278.361 -69.948, increase box by 120 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 388. plFiberPlate : 56 possible sky positions to use as objects from a possible 387. plFiberPlate : 42 possible sky positions to use as objects from a possible 386. plFiberPlate : 27 possible sky positions to use as objects from a possible 385. plFiberPlate : 12 possible sky positions to use as objects from a possible 384. plFiberPlate : 8 possible sky positions to use as objects from a possible 383. plFiberPlate : 20 possible sky positions to use as objects from a possible 382. plFiberPlate : 8 possible sky positions to use as objects from a possible 381. plFiberPlate : 4 possible sky positions to use as objects from a possible 380. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 379. plFiberPlate: No sky found for bundle at 277.938 62.605, increase box by 80 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 379. plFiberPlate : 41 possible sky positions to use as objects from a possible 378. plFiberPlate : 30 possible sky positions to use as objects from a possible 377. plFiberPlate : 12 possible sky positions to use as objects from a possible 376. plFiberPlate : 21 possible sky positions to use as objects from a possible 375. plFiberPlate : 13 possible sky positions to use as objects from a possible 374. plFiberPlate : 7 possible sky positions to use as objects from a possible 373. plFiberPlate : 1 possible sky positions to use as objects from a possible 372. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.09.1/plOverlay-1156.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.09.1/plOverlay-1157.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.09.1/plOverlay-1157.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Sep 11 10:21:46 CDT 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_39/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_39/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 2 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.09.1/plFanuc-1156.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3539,-2.8528) and (-12.62,-1.67) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.09.1/plFanuc-1156.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.09.1/plFanuc-1156.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.09.1/plFanuc-1157.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3662,-3.0153) and (-12.66,-1.57) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.09.1/plFanuc-1157.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.09.1/plFanuc-1157.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Sep 11 10:22:08 CDT 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_39/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_39/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e555e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 2 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1156 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1157 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Sep 11 10:22:20 CDT 2002 Begin running plateEnder dr2002.09.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_39/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_39/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2002.09.1 -morePipes 1 failed. PS: Read file for stderr output of this job.