Sender: LSF System Subject: Job 625: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Nov 13 18:34:08 2002 Results reported at Wed Nov 13 18:40:37 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_117 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2002.11.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 266.02 sec. Max Memory : 10 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Nov 13 18:34:13 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Nov 13 18:34:20 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86/bin:/sdss/ups/prd/gcc/v2_95_2/Linux-2-4/bin:/sdss/ups/prd/dddebugger/v3_1_2/Linux-2/bin:/sdss/ups/prd/gnuplot/v3_5/Linux-2/bin:/sdss/ups/prd/gdb/v4_17/Linux-2/bin:/sdss/ups/prd/sdsscvs/v1_4/Linux/bin:/sdss/ups/prd/rcs/v5_7/Linux/bin:/sdss/ups/prd/diffutils/v2_7/Linux/bin:/sdss/ups/prd/cvs/v1_10/Linux/bin:/sdss/ups/prd/iraf/v2_12_1/Linux/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/usr/games:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/tiling/v3_15/Linux/bin:/sdss/ups/prd/sdb/v4_0/Linux/bin:/sdss/ups/prd/basicSch/v4_0/Linux/bin:/sdss/ups/prd/photoSch/v4_4/Linux/bin:/sdss/ups/prd/ts/v4_5/Linux/bin:/sdss/ups/prd/target/v4_4/Linux/bin:/sdss/ups/prd/astrom/v3_6/Linux/bin:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/dp/v14_117/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Wed Nov 13 18:34:20 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 BASICSCH_DIR=/sdss/ups/prd/basicSch/v4_0/Linux CVS_DIR=/sdss/ups/prd/cvs/v1_10/Linux DDDEBUGGER_DIR=/sdss/ups/prd/dddebugger/v3_1_2/Linux-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/sdss/ups/prd/diffutils/v2_7/Linux DP_DIR=/sdss/ups/prd/dp/v14_117/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GCC_DIR=/sdss/ups/prd/gcc/v2_95_2/Linux-2-4 GDB_DIR=/sdss/ups/prd/gdb/v4_17/Linux-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GNUPLOT_DIR=/sdss/ups/prd/gnuplot/v3_5/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html IRAF_DIR=/sdss/ups/prd/iraf/v2_12_1/Linux KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL OBJECTIVITY_DIR=/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86 PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTOSCH_DIR=/sdss/ups/prd/photoSch/v4_4/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDB_DIR=/sdss/ups/prd/sdb/v4_0/Linux SDSSCVS_DIR=/sdss/ups/prd/sdsscvs/v1_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TARGET_DIR=/sdss/ups/prd/target/v4_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TILING_DIR=/sdss/ups/prd/tiling/v3_15/Linux TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TS_DIR=/sdss/ups/prd/ts/v4_5/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_p18464 --------------------------------------------------------------- --------------------------------------------------------------- Wed Nov 13 18:34:20 CST 2002 Begin running plate --------------------------------------------------------------- Wed Nov 13 18:34:20 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_117/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_117/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e85a68 makePlates : beginning loop over plObs chain; makePlates : making 19 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0817.par makePlates : plateInfo struct for plate 1158 : (h4).mjd 52759 (h4).raCen 207.9689 (h4).decCen 57.9704 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.969 57.970 207.969 59.470 plMakePlateFromTile : mjd of obs : 52759.602920 Observed HA/dec of plate center, fiducial point (deg) : -27.002 57.948 -27.001 59.448 The rotation angle of the fid. point is 132.302178 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0818.par makePlates : plateInfo struct for plate 1159 : (h4).mjd 52759 (h4).raCen 211.1011 (h4).decCen 57.31353 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.101 57.314 211.101 58.814 plMakePlateFromTile : mjd of obs : 52759.600508 Observed HA/dec of plate center, fiducial point (deg) : -31.002 57.292 -31.001 58.792 The rotation angle of the fid. point is 125.908604 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0819.par makePlates : plateInfo struct for plate 1160 : (h4).mjd 52759 (h4).raCen 214.3096 (h4).decCen 56.55293 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 214.310 56.553 214.310 58.053 plMakePlateFromTile : mjd of obs : 52759.601079 Observed HA/dec of plate center, fiducial point (deg) : -34.002 56.532 -34.001 58.032 The rotation angle of the fid. point is 121.007621 plMakePlateFromTile : beginning loop over 1327 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0820.par makePlates : plateInfo struct for plate 1161 : (h4).mjd 52759 (h4).raCen 217.0562 (h4).decCen 55.8043 (h4).haCen -37 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 217.056 55.804 217.056 57.304 plMakePlateFromTile : mjd of obs : 52759.600372 Observed HA/dec of plate center, fiducial point (deg) : -37.002 55.784 -37.001 57.284 The rotation angle of the fid. point is 116.338037 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0821.par makePlates : plateInfo struct for plate 1162 : (h4).mjd 52759 (h4).raCen 219.3592 (h4).decCen 55.15122 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 219.359 55.151 219.359 56.651 plMakePlateFromTile : mjd of obs : 52759.642782 Observed HA/dec of plate center, fiducial point (deg) : -24.002 55.131 -24.001 56.630 The rotation angle of the fid. point is 133.132304 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0822.par makePlates : plateInfo struct for plate 1163 : (h4).mjd 52759 (h4).raCen 222.0209 (h4).decCen 54.20282 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 222.021 54.203 222.021 55.703 plMakePlateFromTile : mjd of obs : 52759.641840 Observed HA/dec of plate center, fiducial point (deg) : -27.002 54.183 -27.001 55.682 The rotation angle of the fid. point is 127.259630 plMakePlateFromTile : beginning loop over 1298 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0823.par makePlates : plateInfo struct for plate 1164 : (h4).mjd 52759 (h4).raCen 224.8842 (h4).decCen 53.04102 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 224.884 53.041 224.884 54.541 plMakePlateFromTile : mjd of obs : 52759.644228 Observed HA/dec of plate center, fiducial point (deg) : -29.002 53.022 -29.001 54.521 The rotation angle of the fid. point is 122.682977 plMakePlateFromTile : beginning loop over 1302 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (1.26, 178.35, 6.9) and (0.49, 180.66, 7.7) checkLTHo : distance = 2.436, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(0.49, 180.66, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0824.par makePlates : plateInfo struct for plate 1165 : (h4).mjd 52759 (h4).raCen 228.0743 (h4).decCen 51.78328 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 228.074 51.783 228.074 53.283 plMakePlateFromTile : mjd of obs : 52759.641979 Observed HA/dec of plate center, fiducial point (deg) : -33.002 51.765 -33.001 53.265 The rotation angle of the fid. point is 115.510064 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0825.par makePlates : plateInfo struct for plate 1166 : (h4).mjd 52759 (h4).raCen 231.2168 (h4).decCen 50.06662 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.217 50.067 231.217 51.567 plMakePlateFromTile : mjd of obs : 52759.725512 Observed HA/dec of plate center, fiducial point (deg) : -6.002 50.048 -6.002 51.548 The rotation angle of the fid. point is 163.299807 plMakePlateFromTile : beginning loop over 1265 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0826.par makePlates : plateInfo struct for plate 1167 : (h4).mjd 52759 (h4).raCen 234.3425 (h4).decCen 48.48349 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 234.343 48.483 234.343 49.983 plMakePlateFromTile : mjd of obs : 52759.725856 Observed HA/dec of plate center, fiducial point (deg) : -9.002 48.466 -9.002 49.966 The rotation angle of the fid. point is 153.375081 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0827.par makePlates : plateInfo struct for plate 1168 : (h4).mjd 52759 (h4).raCen 236.9864 (h4).decCen 46.65155 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 236.986 46.652 236.986 48.152 plMakePlateFromTile : mjd of obs : 52759.766435 Observed HA/dec of plate center, fiducial point (deg) : 2.998 46.635 2.998 48.135 The rotation angle of the fid. point is -169.573213 plMakePlateFromTile : beginning loop over 1231 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0828.par makePlates : plateInfo struct for plate 1169 : (h4).mjd 52759 (h4).raCen 239.8448 (h4).decCen 45.04575 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 239.845 45.046 239.845 46.546 plMakePlateFromTile : mjd of obs : 52759.807608 Observed HA/dec of plate center, fiducial point (deg) : 14.998 45.030 14.998 46.530 The rotation angle of the fid. point is -131.426442 plMakePlateFromTile : beginning loop over 1312 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0829.par makePlates : plateInfo struct for plate 1170 : (h4).mjd 52759 (h4).raCen 242.3385 (h4).decCen 43.16508 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.339 43.165 242.339 44.665 plMakePlateFromTile : mjd of obs : 52759.806202 Observed HA/dec of plate center, fiducial point (deg) : 11.998 43.151 11.998 44.650 The rotation angle of the fid. point is -133.787677 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0830.par makePlates : plateInfo struct for plate 1171 : (h4).mjd 52759 (h4).raCen 244.5702 (h4).decCen 41.29322 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 244.570 41.293 244.570 42.793 plMakePlateFromTile : mjd of obs : 52759.848410 Observed HA/dec of plate center, fiducial point (deg) : 24.998 41.280 24.998 42.780 The rotation angle of the fid. point is -105.108096 plMakePlateFromTile : beginning loop over 1246 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0831.par makePlates : plateInfo struct for plate 1172 : (h4).mjd 52759 (h4).raCen 246.4278 (h4).decCen 39.79571 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 246.428 39.796 246.428 41.296 plMakePlateFromTile : mjd of obs : 52759.848013 Observed HA/dec of plate center, fiducial point (deg) : 22.998 39.784 22.998 41.283 The rotation angle of the fid. point is -103.561904 plMakePlateFromTile : beginning loop over 1288 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0832.par makePlates : plateInfo struct for plate 1173 : (h4).mjd 52759 (h4).raCen 248.1803 (h4).decCen 38.02892 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.180 38.029 248.180 39.529 plMakePlateFromTile : mjd of obs : 52759.847326 Observed HA/dec of plate center, fiducial point (deg) : 20.998 38.018 20.998 39.517 The rotation angle of the fid. point is -100.706987 plMakePlateFromTile : beginning loop over 1286 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0833.par makePlates : plateInfo struct for plate 1174 : (h4).mjd 52759 (h4).raCen 250.2427 (h4).decCen 35.90693 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.243 35.907 250.243 37.407 plMakePlateFromTile : mjd of obs : 52759.847498 Observed HA/dec of plate center, fiducial point (deg) : 18.998 35.897 18.998 37.396 The rotation angle of the fid. point is -95.754198 plMakePlateFromTile : beginning loop over 1215 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0834.par makePlates : plateInfo struct for plate 1175 : (h4).mjd 52759 (h4).raCen 252.2754 (h4).decCen 33.81375 (h4).haCen 32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 252.275 33.814 252.275 35.314 plMakePlateFromTile : mjd of obs : 52759.889154 Observed HA/dec of plate center, fiducial point (deg) : 31.998 33.805 31.998 35.305 The rotation angle of the fid. point is -83.204493 plMakePlateFromTile : beginning loop over 1276 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk53/complete//plPlugMapT-0835.par makePlates : plateInfo struct for plate 1176 : (h4).mjd 52759 (h4).raCen 253.8726 (h4).decCen 32.01316 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.873 32.013 253.873 33.513 plMakePlateFromTile : mjd of obs : 52759.890808 Observed HA/dec of plate center, fiducial point (deg) : 30.998 32.006 30.998 33.505 The rotation angle of the fid. point is -79.908630 plMakePlateFromTile : beginning loop over 1215 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Nov 13 18:35:41 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_117/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_117/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 19 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1158.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 119 2 7 100 3 7 70 4 13 102 5 12 135 6 8 108 7 8 92 8 11 96 9 12 86 10 22 162 11 13 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 26 56 plFiberPlate : adding spectro-photo std with objId = 3183 20 4 86 21 plFiberPlate : adding spectro-photo std with objId = 3183 20 5 96 5 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 31 55 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 32 13 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 34 55 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 31 75 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 30 11 plFiberPlate : 106 possible sky positions to use as objects from a possible 600. plFiberPlate : 78 possible sky positions to use as objects from a possible 599. plFiberPlate : 55 possible sky positions to use as objects from a possible 598. plFiberPlate : 22 possible sky positions to use as objects from a possible 597. plFiberPlate : 30 possible sky positions to use as objects from a possible 596. plFiberPlate : 52 possible sky positions to use as objects from a possible 595. plFiberPlate : 50 possible sky positions to use as objects from a possible 594. plFiberPlate : 77 possible sky positions to use as objects from a possible 593. plFiberPlate : 48 possible sky positions to use as objects from a possible 592. plFiberPlate : 41 possible sky positions to use as objects from a possible 591. plFiberPlate : 35 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 19 possible sky positions to use as objects from a possible 588. plFiberPlate : 25 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 11 possible sky positions to use as objects from a possible 585. plFiberPlate : 67 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 6 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 8 possible sky positions to use as objects from a possible 579. plFiberPlate : 13 possible sky positions to use as objects from a possible 578. plFiberPlate : 2 possible sky positions to use as objects from a possible 577. plFiberPlate : 24 possible sky positions to use as objects from a possible 576. plFiberPlate : 70 possible sky positions to use as objects from a possible 575. plFiberPlate : 23 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 9 possible sky positions to use as objects from a possible 572. plFiberPlate : 14 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 19 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 664 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1158.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1158.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1159.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 128 2 14 105 3 14 70 4 11 99 5 14 114 6 8 98 7 10 90 8 9 110 9 8 104 10 25 147 11 21 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 36 24 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 52 6 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 42 32 plFiberPlate : adding spectro-photo std with objId = 3183 20 4 100 53 plFiberPlate : adding spectro-photo std with objId = 3183 20 5 96 5 plFiberPlate : adding spectro-photo std with objId = 3183 20 4 111 25 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 43 13 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 48 30 plFiberPlate : 92 possible sky positions to use as objects from a possible 575. plFiberPlate : 57 possible sky positions to use as objects from a possible 574. plFiberPlate : 31 possible sky positions to use as objects from a possible 573. plFiberPlate : 29 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 50 possible sky positions to use as objects from a possible 570. plFiberPlate : 54 possible sky positions to use as objects from a possible 569. plFiberPlate : 75 possible sky positions to use as objects from a possible 568. plFiberPlate : 56 possible sky positions to use as objects from a possible 567. plFiberPlate : 42 possible sky positions to use as objects from a possible 566. plFiberPlate : 30 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 0 possible sky positions to use as objects from a possible 563. plFiberPlate: No sky found for bundle at -13.792 -49.518, increase box by 10 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 563. plFiberPlate : 37 possible sky positions to use as objects from a possible 562. plFiberPlate : 13 possible sky positions to use as objects from a possible 561. plFiberPlate : 25 possible sky positions to use as objects from a possible 560. plFiberPlate : 76 possible sky positions to use as objects from a possible 559. plFiberPlate : 51 possible sky positions to use as objects from a possible 558. plFiberPlate : 29 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 4 possible sky positions to use as objects from a possible 555. plFiberPlate : 16 possible sky positions to use as objects from a possible 554. plFiberPlate : 10 possible sky positions to use as objects from a possible 553. plFiberPlate : 7 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 44 possible sky positions to use as objects from a possible 550. plFiberPlate : 43 possible sky positions to use as objects from a possible 549. plFiberPlate : 21 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 6 possible sky positions to use as objects from a possible 544. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1158.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1159.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1159.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1160.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 118 2 15 90 3 7 64 4 15 101 5 13 126 6 3 99 7 12 94 8 15 103 9 10 114 10 13 147 11 15 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 49 78 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 52 6 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 58 34 plFiberPlate : adding spectro-photo std with objId = 3183 20 1 120 78 plFiberPlate : adding spectro-photo std with objId = 3183 20 4 111 25 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 55 120 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 59 130 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 48 30 plFiberPlate : 108 possible sky positions to use as objects from a possible 588. plFiberPlate : 53 possible sky positions to use as objects from a possible 587. plFiberPlate : 37 possible sky positions to use as objects from a possible 586. plFiberPlate : 23 possible sky positions to use as objects from a possible 585. plFiberPlate : 41 possible sky positions to use as objects from a possible 584. plFiberPlate : 29 possible sky positions to use as objects from a possible 583. plFiberPlate : 39 possible sky positions to use as objects from a possible 582. plFiberPlate : 99 possible sky positions to use as objects from a possible 581. plFiberPlate : 74 possible sky positions to use as objects from a possible 580. plFiberPlate : 48 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 20 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 76 possible sky positions to use as objects from a possible 572. plFiberPlate : 52 possible sky positions to use as objects from a possible 571. plFiberPlate : 33 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 5 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 9 possible sky positions to use as objects from a possible 564. plFiberPlate : 58 possible sky positions to use as objects from a possible 563. plFiberPlate : 42 possible sky positions to use as objects from a possible 562. plFiberPlate : 32 possible sky positions to use as objects from a possible 561. plFiberPlate : 17 possible sky positions to use as objects from a possible 560. plFiberPlate : 13 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 24 possible sky positions to use as objects from a possible 557. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1159.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1160.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1160.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1161.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 108 2 11 89 3 9 61 4 14 94 5 16 134 6 8 100 7 13 82 8 14 100 9 9 111 10 15 150 11 10 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 62 46 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 63 27 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 58 34 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 68 128 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 75 108 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 75 112 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 73 33 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 59 130 plFiberPlate : 96 possible sky positions to use as objects from a possible 578. plFiberPlate : 48 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 26 possible sky positions to use as objects from a possible 575. plFiberPlate : 40 possible sky positions to use as objects from a possible 574. plFiberPlate : 37 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 79 possible sky positions to use as objects from a possible 571. plFiberPlate : 50 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 13 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 20 possible sky positions to use as objects from a possible 563. plFiberPlate : 95 possible sky positions to use as objects from a possible 562. plFiberPlate : 81 possible sky positions to use as objects from a possible 561. plFiberPlate : 42 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 14 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : 51 possible sky positions to use as objects from a possible 553. plFiberPlate : 37 possible sky positions to use as objects from a possible 552. plFiberPlate : 2 possible sky positions to use as objects from a possible 551. plFiberPlate : 0 possible sky positions to use as objects from a possible 550. plFiberPlate: No sky found for bundle at 9.906 215.786, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 550. plFiberPlate: No sky found for bundle at 9.906 215.786, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 550. plFiberPlate : 10 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 12 possible sky positions to use as objects from a possible 547. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1160.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1161.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1161.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1162.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 123 2 10 106 3 9 82 4 13 85 5 10 107 6 9 100 7 8 101 8 9 100 9 7 108 10 16 157 11 13 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3184 20 2 20 86 plFiberPlate : adding spectro-photo std with objId = 3184 20 3 27 42 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 68 128 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 77 85 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 73 33 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 75 112 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 75 10 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 85 37 plFiberPlate : 98 possible sky positions to use as objects from a possible 580. plFiberPlate : 71 possible sky positions to use as objects from a possible 579. plFiberPlate : 45 possible sky positions to use as objects from a possible 578. plFiberPlate : 32 possible sky positions to use as objects from a possible 577. plFiberPlate : 38 possible sky positions to use as objects from a possible 576. plFiberPlate : 44 possible sky positions to use as objects from a possible 575. plFiberPlate : 54 possible sky positions to use as objects from a possible 574. plFiberPlate : 48 possible sky positions to use as objects from a possible 573. plFiberPlate : 37 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 19 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : 9 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 22 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 53 possible sky positions to use as objects from a possible 564. plFiberPlate : 38 possible sky positions to use as objects from a possible 563. plFiberPlate : 17 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 5 possible sky positions to use as objects from a possible 560. plFiberPlate : 5 possible sky positions to use as objects from a possible 559. plFiberPlate : 5 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 8 possible sky positions to use as objects from a possible 556. plFiberPlate : 54 possible sky positions to use as objects from a possible 555. plFiberPlate : 52 possible sky positions to use as objects from a possible 554. plFiberPlate : 38 possible sky positions to use as objects from a possible 553. plFiberPlate : 15 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 15 possible sky positions to use as objects from a possible 549. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1161.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1162.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1162.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1163.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 103 2 12 88 3 6 78 4 6 107 5 13 125 6 10 86 7 17 82 8 15 97 9 10 90 10 14 153 11 13 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3184 20 3 28 59 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 93 8 plFiberPlate : adding spectro-photo std with objId = 3184 20 5 41 77 plFiberPlate : adding spectro-photo std with objId = 3184 20 6 27 53 plFiberPlate : adding spectro-photo std with objId = 3184 20 5 35 65 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 79 102 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 85 37 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 96 149 plFiberPlate : 118 possible sky positions to use as objects from a possible 566. plFiberPlate : 73 possible sky positions to use as objects from a possible 565. plFiberPlate : 45 possible sky positions to use as objects from a possible 564. plFiberPlate : 20 possible sky positions to use as objects from a possible 563. plFiberPlate : 19 possible sky positions to use as objects from a possible 562. plFiberPlate : 17 possible sky positions to use as objects from a possible 561. plFiberPlate : 38 possible sky positions to use as objects from a possible 560. plFiberPlate : 81 possible sky positions to use as objects from a possible 559. plFiberPlate : 58 possible sky positions to use as objects from a possible 558. plFiberPlate : 17 possible sky positions to use as objects from a possible 557. plFiberPlate : 9 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 5 possible sky positions to use as objects from a possible 554. plFiberPlate : 5 possible sky positions to use as objects from a possible 553. plFiberPlate : 12 possible sky positions to use as objects from a possible 552. plFiberPlate : 14 possible sky positions to use as objects from a possible 551. plFiberPlate : 65 possible sky positions to use as objects from a possible 550. plFiberPlate : 38 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 11 possible sky positions to use as objects from a possible 547. plFiberPlate : 4 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 4 possible sky positions to use as objects from a possible 544. plFiberPlate : 3 possible sky positions to use as objects from a possible 543. plFiberPlate : 13 possible sky positions to use as objects from a possible 542. plFiberPlate : 56 possible sky positions to use as objects from a possible 541. plFiberPlate : 46 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 6 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1162.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1163.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1163.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1164.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 112 2 14 80 3 4 57 4 7 82 5 13 127 6 18 105 7 14 93 8 14 110 9 10 106 10 15 134 11 15 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3184 20 4 47 106 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 105 63 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 105 23 plFiberPlate : adding spectro-photo std with objId = 3184 20 5 41 77 plFiberPlate : adding spectro-photo std with objId = 3184 20 3 54 61 plFiberPlate : adding spectro-photo std with objId = 3184 20 6 41 6 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 105 25 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 96 149 plFiberPlate : 89 possible sky positions to use as objects from a possible 560. plFiberPlate : 38 possible sky positions to use as objects from a possible 559. plFiberPlate : 24 possible sky positions to use as objects from a possible 558. plFiberPlate : 16 possible sky positions to use as objects from a possible 557. plFiberPlate : 22 possible sky positions to use as objects from a possible 556. plFiberPlate : 22 possible sky positions to use as objects from a possible 555. plFiberPlate : 65 possible sky positions to use as objects from a possible 554. plFiberPlate : 56 possible sky positions to use as objects from a possible 553. plFiberPlate : 30 possible sky positions to use as objects from a possible 552. plFiberPlate : 23 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 9 possible sky positions to use as objects from a possible 548. plFiberPlate : 3 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 28 possible sky positions to use as objects from a possible 545. plFiberPlate : 60 possible sky positions to use as objects from a possible 544. plFiberPlate : 33 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 4 possible sky positions to use as objects from a possible 541. plFiberPlate : 7 possible sky positions to use as objects from a possible 540. plFiberPlate : 13 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 63 possible sky positions to use as objects from a possible 535. plFiberPlate : 45 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 7 possible sky positions to use as objects from a possible 532. plFiberPlate : 28 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 22 possible sky positions to use as objects from a possible 529. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1163.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1164.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1164.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1165.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 125 2 11 110 3 8 73 4 8 78 5 11 114 6 5 93 7 11 94 8 13 111 9 7 96 10 16 158 11 15 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3184 20 6 57 59 plFiberPlate : adding spectro-photo std with objId = 3184 20 2 65 50 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 125 43 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 116 53 plFiberPlate : adding spectro-photo std with objId = 3184 20 3 54 61 plFiberPlate : adding spectro-photo std with objId = 3184 20 4 67 14 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 112 18 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 114 112 plFiberPlate : 81 possible sky positions to use as objects from a possible 565. plFiberPlate : 67 possible sky positions to use as objects from a possible 564. plFiberPlate : 45 possible sky positions to use as objects from a possible 563. plFiberPlate : 37 possible sky positions to use as objects from a possible 562. plFiberPlate : 34 possible sky positions to use as objects from a possible 561. plFiberPlate : 44 possible sky positions to use as objects from a possible 560. plFiberPlate : 39 possible sky positions to use as objects from a possible 559. plFiberPlate : 56 possible sky positions to use as objects from a possible 558. plFiberPlate : 53 possible sky positions to use as objects from a possible 557. plFiberPlate : 40 possible sky positions to use as objects from a possible 556. plFiberPlate : 27 possible sky positions to use as objects from a possible 555. plFiberPlate : 8 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 17 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 56 possible sky positions to use as objects from a possible 549. plFiberPlate : 39 possible sky positions to use as objects from a possible 548. plFiberPlate : 24 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 8 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 11 possible sky positions to use as objects from a possible 542. plFiberPlate : 15 possible sky positions to use as objects from a possible 541. plFiberPlate : 57 possible sky positions to use as objects from a possible 540. plFiberPlate : 44 possible sky positions to use as objects from a possible 539. plFiberPlate : 45 possible sky positions to use as objects from a possible 538. plFiberPlate : 33 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 57 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1164.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1165.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1165.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1166.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 137 2 10 85 3 6 32 4 10 56 5 14 115 6 8 86 7 16 83 8 15 110 9 15 100 10 14 124 11 10 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 136 109 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 137 8 plFiberPlate : adding spectro-photo std with objId = 3184 20 3 74 112 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 136 71 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 137 45 plFiberPlate : adding spectro-photo std with objId = 3225 20 6 132 77 plFiberPlate : adding spectro-photo std with objId = 3184 20 6 77 20 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 136 107 plFiberPlate : 56 possible sky positions to use as objects from a possible 533. plFiberPlate : 32 possible sky positions to use as objects from a possible 532. plFiberPlate : 13 possible sky positions to use as objects from a possible 531. plFiberPlate : 25 possible sky positions to use as objects from a possible 530. plFiberPlate : 20 possible sky positions to use as objects from a possible 529. plFiberPlate : 42 possible sky positions to use as objects from a possible 528. plFiberPlate : 50 possible sky positions to use as objects from a possible 527. plFiberPlate : 57 possible sky positions to use as objects from a possible 526. plFiberPlate : 41 possible sky positions to use as objects from a possible 525. plFiberPlate : 25 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : 9 possible sky positions to use as objects from a possible 520. plFiberPlate : 18 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 60 possible sky positions to use as objects from a possible 517. plFiberPlate : 32 possible sky positions to use as objects from a possible 516. plFiberPlate : 28 possible sky positions to use as objects from a possible 515. plFiberPlate : 18 possible sky positions to use as objects from a possible 514. plFiberPlate : 21 possible sky positions to use as objects from a possible 513. plFiberPlate : 5 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 9 possible sky positions to use as objects from a possible 510. plFiberPlate : 20 possible sky positions to use as objects from a possible 509. plFiberPlate : 48 possible sky positions to use as objects from a possible 508. plFiberPlate : 38 possible sky positions to use as objects from a possible 507. plFiberPlate : 19 possible sky positions to use as objects from a possible 506. plFiberPlate : 19 possible sky positions to use as objects from a possible 505. plFiberPlate : 7 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 28 possible sky positions to use as objects from a possible 502. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1165.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1166.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1166.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1167.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 100 2 14 86 3 6 53 4 2 74 5 12 126 6 9 94 7 13 92 8 15 102 9 11 104 10 16 141 11 14 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 149 29 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 156 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 15 65 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 147 12 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 154 90 plFiberPlate : adding spectro-photo std with objId = 3226 20 2 13 34 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 15 80 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 147 83 plFiberPlate : 74 possible sky positions to use as objects from a possible 538. plFiberPlate : 22 possible sky positions to use as objects from a possible 537. plFiberPlate : 28 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : 18 possible sky positions to use as objects from a possible 533. plFiberPlate : 35 possible sky positions to use as objects from a possible 532. plFiberPlate : 66 possible sky positions to use as objects from a possible 531. plFiberPlate : 40 possible sky positions to use as objects from a possible 530. plFiberPlate : 23 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 9 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 4 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 11 possible sky positions to use as objects from a possible 523. plFiberPlate : 68 possible sky positions to use as objects from a possible 522. plFiberPlate : 32 possible sky positions to use as objects from a possible 521. plFiberPlate : 30 possible sky positions to use as objects from a possible 520. plFiberPlate : 23 possible sky positions to use as objects from a possible 519. plFiberPlate : 20 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 4 possible sky positions to use as objects from a possible 516. plFiberPlate : 7 possible sky positions to use as objects from a possible 515. plFiberPlate : 18 possible sky positions to use as objects from a possible 514. plFiberPlate : 67 possible sky positions to use as objects from a possible 513. plFiberPlate : 37 possible sky positions to use as objects from a possible 512. plFiberPlate : 32 possible sky positions to use as objects from a possible 511. plFiberPlate : 14 possible sky positions to use as objects from a possible 510. plFiberPlate : 6 possible sky positions to use as objects from a possible 509. plFiberPlate : 16 possible sky positions to use as objects from a possible 508. plFiberPlate : 57 possible sky positions to use as objects from a possible 507. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1166.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1167.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1167.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1168.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 106 2 15 70 3 5 33 4 4 47 5 10 109 6 5 87 7 7 83 8 11 100 9 2 114 10 15 120 11 19 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 36 102 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 175 100 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 26 20 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 31 82 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 171 44 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 37 68 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 27 105 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 165 122 plFiberPlate : 50 possible sky positions to use as objects from a possible 481. plFiberPlate : 32 possible sky positions to use as objects from a possible 480. plFiberPlate : 24 possible sky positions to use as objects from a possible 479. plFiberPlate : 18 possible sky positions to use as objects from a possible 478. plFiberPlate : 8 possible sky positions to use as objects from a possible 477. plFiberPlate : 6 possible sky positions to use as objects from a possible 476. plFiberPlate : 48 possible sky positions to use as objects from a possible 475. plFiberPlate : 44 possible sky positions to use as objects from a possible 474. plFiberPlate : 29 possible sky positions to use as objects from a possible 473. plFiberPlate : 22 possible sky positions to use as objects from a possible 472. plFiberPlate : 9 possible sky positions to use as objects from a possible 471. plFiberPlate : 13 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 12 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 15 possible sky positions to use as objects from a possible 466. plFiberPlate : 57 possible sky positions to use as objects from a possible 465. plFiberPlate : 54 possible sky positions to use as objects from a possible 464. plFiberPlate : 34 possible sky positions to use as objects from a possible 463. plFiberPlate : 27 possible sky positions to use as objects from a possible 462. plFiberPlate : 29 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 7 possible sky positions to use as objects from a possible 457. plFiberPlate : 30 possible sky positions to use as objects from a possible 456. plFiberPlate : 23 possible sky positions to use as objects from a possible 455. plFiberPlate : 21 possible sky positions to use as objects from a possible 454. plFiberPlate : 14 possible sky positions to use as objects from a possible 453. plFiberPlate : 7 possible sky positions to use as objects from a possible 452. plFiberPlate : 16 possible sky positions to use as objects from a possible 451. plFiberPlate : 30 possible sky positions to use as objects from a possible 450. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1167.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1168.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1168.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1169.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 132 2 10 102 3 11 51 4 13 65 5 4 102 6 6 86 7 14 106 8 19 121 9 6 105 10 21 133 11 11 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 187 33 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 50 94 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 51 38 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 50 28 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 193 126 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 47 93 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 41 42 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 53 77 plFiberPlate : 73 possible sky positions to use as objects from a possible 548. plFiberPlate : 41 possible sky positions to use as objects from a possible 547. plFiberPlate : 27 possible sky positions to use as objects from a possible 546. plFiberPlate : 16 possible sky positions to use as objects from a possible 545. plFiberPlate : 34 possible sky positions to use as objects from a possible 544. plFiberPlate : 22 possible sky positions to use as objects from a possible 543. plFiberPlate : 69 possible sky positions to use as objects from a possible 542. plFiberPlate : 44 possible sky positions to use as objects from a possible 541. plFiberPlate : 36 possible sky positions to use as objects from a possible 540. plFiberPlate : 23 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 12 possible sky positions to use as objects from a possible 535. plFiberPlate : 3 possible sky positions to use as objects from a possible 534. plFiberPlate : 21 possible sky positions to use as objects from a possible 533. plFiberPlate : 52 possible sky positions to use as objects from a possible 532. plFiberPlate : 41 possible sky positions to use as objects from a possible 531. plFiberPlate : 25 possible sky positions to use as objects from a possible 530. plFiberPlate : 21 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : 6 possible sky positions to use as objects from a possible 526. plFiberPlate : 5 possible sky positions to use as objects from a possible 525. plFiberPlate : 13 possible sky positions to use as objects from a possible 524. plFiberPlate : 50 possible sky positions to use as objects from a possible 523. plFiberPlate : 30 possible sky positions to use as objects from a possible 522. plFiberPlate : 27 possible sky positions to use as objects from a possible 521. plFiberPlate : 21 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 9 possible sky positions to use as objects from a possible 518. plFiberPlate : 62 possible sky positions to use as objects from a possible 517. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1168.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1169.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1169.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1170.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 111 2 18 87 3 6 45 4 9 62 5 10 121 6 7 78 7 14 94 8 13 120 9 4 85 10 19 112 11 17 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 75 77 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 65 53 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 74 29 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 213 192 plFiberPlate : adding spectro-photo std with objId = 3226 20 6 71 8 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 62 88 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 197 156 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 198 27 plFiberPlate : 55 possible sky positions to use as objects from a possible 507. plFiberPlate : 27 possible sky positions to use as objects from a possible 506. plFiberPlate : 16 possible sky positions to use as objects from a possible 505. plFiberPlate : 14 possible sky positions to use as objects from a possible 504. plFiberPlate : 17 possible sky positions to use as objects from a possible 503. plFiberPlate : 36 possible sky positions to use as objects from a possible 502. plFiberPlate : 40 possible sky positions to use as objects from a possible 501. plFiberPlate : 35 possible sky positions to use as objects from a possible 500. plFiberPlate : 39 possible sky positions to use as objects from a possible 499. plFiberPlate : 27 possible sky positions to use as objects from a possible 498. plFiberPlate : 9 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 3 possible sky positions to use as objects from a possible 495. plFiberPlate : 11 possible sky positions to use as objects from a possible 494. plFiberPlate : 17 possible sky positions to use as objects from a possible 493. plFiberPlate : 20 possible sky positions to use as objects from a possible 492. plFiberPlate : 63 possible sky positions to use as objects from a possible 491. plFiberPlate : 50 possible sky positions to use as objects from a possible 490. plFiberPlate : 32 possible sky positions to use as objects from a possible 489. plFiberPlate : 30 possible sky positions to use as objects from a possible 488. plFiberPlate : 16 possible sky positions to use as objects from a possible 487. plFiberPlate : 12 possible sky positions to use as objects from a possible 486. plFiberPlate : 18 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 31 possible sky positions to use as objects from a possible 483. plFiberPlate : 51 possible sky positions to use as objects from a possible 482. plFiberPlate : 35 possible sky positions to use as objects from a possible 481. plFiberPlate : 14 possible sky positions to use as objects from a possible 480. plFiberPlate : 8 possible sky positions to use as objects from a possible 479. plFiberPlate : 3 possible sky positions to use as objects from a possible 478. plFiberPlate : 12 possible sky positions to use as objects from a possible 477. plFiberPlate : 44 possible sky positions to use as objects from a possible 476. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1169.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1170.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1170.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1171.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 89 2 13 89 3 7 45 4 3 55 5 16 116 6 13 95 7 10 96 8 17 109 9 8 101 10 18 135 11 9 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 82 12 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 91 89 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 75 77 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 227 142 plFiberPlate : adding spectro-photo std with objId = 3225 20 3 213 192 plFiberPlate : adding spectro-photo std with objId = 3226 20 2 75 39 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 80 78 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 217 8 plFiberPlate : 59 possible sky positions to use as objects from a possible 499. plFiberPlate : 29 possible sky positions to use as objects from a possible 498. plFiberPlate : 22 possible sky positions to use as objects from a possible 497. plFiberPlate : 27 possible sky positions to use as objects from a possible 496. plFiberPlate : 19 possible sky positions to use as objects from a possible 495. plFiberPlate : 7 possible sky positions to use as objects from a possible 494. plFiberPlate : 20 possible sky positions to use as objects from a possible 493. plFiberPlate : 50 possible sky positions to use as objects from a possible 492. plFiberPlate : 27 possible sky positions to use as objects from a possible 491. plFiberPlate : 7 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 8 possible sky positions to use as objects from a possible 488. plFiberPlate : 6 possible sky positions to use as objects from a possible 487. plFiberPlate : 8 possible sky positions to use as objects from a possible 486. plFiberPlate : 2 possible sky positions to use as objects from a possible 485. plFiberPlate : 7 possible sky positions to use as objects from a possible 484. plFiberPlate : 43 possible sky positions to use as objects from a possible 483. plFiberPlate : 32 possible sky positions to use as objects from a possible 482. plFiberPlate : 24 possible sky positions to use as objects from a possible 481. plFiberPlate : 17 possible sky positions to use as objects from a possible 480. plFiberPlate : 3 possible sky positions to use as objects from a possible 479. plFiberPlate : 11 possible sky positions to use as objects from a possible 478. plFiberPlate : 10 possible sky positions to use as objects from a possible 477. plFiberPlate : 7 possible sky positions to use as objects from a possible 476. plFiberPlate : 23 possible sky positions to use as objects from a possible 475. plFiberPlate : 61 possible sky positions to use as objects from a possible 474. plFiberPlate : 38 possible sky positions to use as objects from a possible 473. plFiberPlate : 15 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 7 possible sky positions to use as objects from a possible 470. plFiberPlate : 17 possible sky positions to use as objects from a possible 469. plFiberPlate : 31 possible sky positions to use as objects from a possible 468. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1170.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1171.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1171.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1172.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 94 2 14 85 3 13 44 4 13 52 5 25 119 6 17 99 7 20 101 8 21 112 9 18 101 10 22 102 11 9 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 1 228 158 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 239 10 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 240 155 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 241 83 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 238 51 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 94 92 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 92 102 plFiberPlate : adding spectro-photo std with objId = 3226 20 2 97 103 plFiberPlate : 57 possible sky positions to use as objects from a possible 501. plFiberPlate : 25 possible sky positions to use as objects from a possible 500. plFiberPlate : 15 possible sky positions to use as objects from a possible 499. plFiberPlate : 13 possible sky positions to use as objects from a possible 498. plFiberPlate : 16 possible sky positions to use as objects from a possible 497. plFiberPlate : 29 possible sky positions to use as objects from a possible 496. plFiberPlate : 53 possible sky positions to use as objects from a possible 495. plFiberPlate : 44 possible sky positions to use as objects from a possible 494. plFiberPlate : 16 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 7 possible sky positions to use as objects from a possible 491. plFiberPlate : 2 possible sky positions to use as objects from a possible 490. plFiberPlate : 0 possible sky positions to use as objects from a possible 489. plFiberPlate: No sky found for bundle at 100.750 -86.825, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 489. plFiberPlate : 0 possible sky positions to use as objects from a possible 488. plFiberPlate: No sky found for bundle at 122.935 -64.913, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 488. plFiberPlate: No sky found for bundle at 122.935 -64.913, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 488. plFiberPlate: No sky found for bundle at 122.935 -64.913, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 488. plFiberPlate: No sky found for bundle at 122.935 -64.913, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 488. plFiberPlate: No sky found for bundle at 122.935 -64.913, increase box by 50 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 488. plFiberPlate : 3 possible sky positions to use as objects from a possible 487. plFiberPlate : 19 possible sky positions to use as objects from a possible 486. plFiberPlate : 36 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 4 possible sky positions to use as objects from a possible 483. plFiberPlate : 10 possible sky positions to use as objects from a possible 482. plFiberPlate : 1 possible sky positions to use as objects from a possible 481. plFiberPlate : 1 possible sky positions to use as objects from a possible 480. plFiberPlate : 0 possible sky positions to use as objects from a possible 479. plFiberPlate: No sky found for bundle at 154.988 -6.996, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 479. plFiberPlate: No sky found for bundle at 154.988 -6.996, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 479. plFiberPlate: No sky found for bundle at 154.988 -6.996, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 479. plFiberPlate: No sky found for bundle at 154.988 -6.996, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 479. plFiberPlate: No sky found for bundle at 154.988 -6.996, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 479. plFiberPlate : 2 possible sky positions to use as objects from a possible 478. plFiberPlate : 9 possible sky positions to use as objects from a possible 477. plFiberPlate : 98 possible sky positions to use as objects from a possible 476. plFiberPlate : 54 possible sky positions to use as objects from a possible 475. plFiberPlate : 20 possible sky positions to use as objects from a possible 474. plFiberPlate : 7 possible sky positions to use as objects from a possible 473. plFiberPlate : 20 possible sky positions to use as objects from a possible 472. plFiberPlate : 14 possible sky positions to use as objects from a possible 471. plFiberPlate : 53 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1171.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1172.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1172.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1173.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 108 2 12 66 3 12 28 4 4 36 5 19 118 6 14 95 7 13 110 8 17 143 9 12 102 10 25 102 11 13 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 244 61 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 247 113 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 246 132 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 115 89 plFiberPlate : adding spectro-photo std with objId = 3226 20 2 105 10 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 118 157 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 119 6 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 253 91 plFiberPlate : 37 possible sky positions to use as objects from a possible 505. plFiberPlate : 15 possible sky positions to use as objects from a possible 504. plFiberPlate : 10 possible sky positions to use as objects from a possible 503. plFiberPlate : 20 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 21 possible sky positions to use as objects from a possible 500. plFiberPlate : 28 possible sky positions to use as objects from a possible 499. plFiberPlate : 33 possible sky positions to use as objects from a possible 498. plFiberPlate : 18 possible sky positions to use as objects from a possible 497. plFiberPlate : 12 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 9 possible sky positions to use as objects from a possible 494. plFiberPlate : 5 possible sky positions to use as objects from a possible 493. plFiberPlate : 10 possible sky positions to use as objects from a possible 492. plFiberPlate : 9 possible sky positions to use as objects from a possible 491. plFiberPlate : 22 possible sky positions to use as objects from a possible 490. plFiberPlate : 62 possible sky positions to use as objects from a possible 489. plFiberPlate : 59 possible sky positions to use as objects from a possible 488. plFiberPlate : 49 possible sky positions to use as objects from a possible 487. plFiberPlate : 27 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 8 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 13 possible sky positions to use as objects from a possible 482. plFiberPlate : 43 possible sky positions to use as objects from a possible 481. plFiberPlate : 43 possible sky positions to use as objects from a possible 480. plFiberPlate : 35 possible sky positions to use as objects from a possible 479. plFiberPlate : 43 possible sky positions to use as objects from a possible 478. plFiberPlate : 30 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : 22 possible sky positions to use as objects from a possible 475. plFiberPlate : 69 possible sky positions to use as objects from a possible 474. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1172.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1173.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1173.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1174.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 96 2 16 72 3 6 22 4 6 28 5 22 85 6 14 70 7 20 95 8 24 117 9 17 82 10 21 102 11 14 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 134 115 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 138 86 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 132 145 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 261 101 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 272 145 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 125 6 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 260 178 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 125 64 plFiberPlate : 40 possible sky positions to use as objects from a possible 425. plFiberPlate : 14 possible sky positions to use as objects from a possible 424. plFiberPlate : 15 possible sky positions to use as objects from a possible 423. plFiberPlate : 26 possible sky positions to use as objects from a possible 422. plFiberPlate : 10 possible sky positions to use as objects from a possible 421. plFiberPlate : 16 possible sky positions to use as objects from a possible 420. plFiberPlate : 23 possible sky positions to use as objects from a possible 419. plFiberPlate : 34 possible sky positions to use as objects from a possible 418. plFiberPlate : 21 possible sky positions to use as objects from a possible 417. plFiberPlate : 6 possible sky positions to use as objects from a possible 416. plFiberPlate : 3 possible sky positions to use as objects from a possible 415. plFiberPlate : 3 possible sky positions to use as objects from a possible 414. plFiberPlate : 5 possible sky positions to use as objects from a possible 413. plFiberPlate : 6 possible sky positions to use as objects from a possible 412. plFiberPlate : 6 possible sky positions to use as objects from a possible 411. plFiberPlate : 11 possible sky positions to use as objects from a possible 410. plFiberPlate : 43 possible sky positions to use as objects from a possible 409. plFiberPlate : 42 possible sky positions to use as objects from a possible 408. plFiberPlate : 32 possible sky positions to use as objects from a possible 407. plFiberPlate : 24 possible sky positions to use as objects from a possible 406. plFiberPlate : 22 possible sky positions to use as objects from a possible 405. plFiberPlate : 13 possible sky positions to use as objects from a possible 404. plFiberPlate : 3 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 32 possible sky positions to use as objects from a possible 401. plFiberPlate : 49 possible sky positions to use as objects from a possible 400. plFiberPlate : 28 possible sky positions to use as objects from a possible 399. plFiberPlate : 19 possible sky positions to use as objects from a possible 398. plFiberPlate : 13 possible sky positions to use as objects from a possible 397. plFiberPlate : 12 possible sky positions to use as objects from a possible 396. plFiberPlate : 4 possible sky positions to use as objects from a possible 395. plFiberPlate : 26 possible sky positions to use as objects from a possible 394. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1173.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1174.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1174.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1175.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 108 2 19 71 3 3 27 4 6 24 5 21 104 6 10 97 7 14 105 8 29 116 9 9 116 10 25 99 11 26 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 138 86 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 288 146 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 140 192 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 156 149 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 145 139 plFiberPlate : adding spectro-photo std with objId = 3225 20 2 284 121 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 149 97 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 145 184 plFiberPlate : 29 possible sky positions to use as objects from a possible 479. plFiberPlate : 21 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 6 possible sky positions to use as objects from a possible 476. plFiberPlate : 24 possible sky positions to use as objects from a possible 475. plFiberPlate : 9 possible sky positions to use as objects from a possible 474. plFiberPlate : 34 possible sky positions to use as objects from a possible 473. plFiberPlate : 27 possible sky positions to use as objects from a possible 472. plFiberPlate : 22 possible sky positions to use as objects from a possible 471. plFiberPlate : 6 possible sky positions to use as objects from a possible 470. plFiberPlate : 11 possible sky positions to use as objects from a possible 469. plFiberPlate : 7 possible sky positions to use as objects from a possible 468. plFiberPlate : 11 possible sky positions to use as objects from a possible 467. plFiberPlate : 4 possible sky positions to use as objects from a possible 466. plFiberPlate : 13 possible sky positions to use as objects from a possible 465. plFiberPlate : 24 possible sky positions to use as objects from a possible 464. plFiberPlate : 49 possible sky positions to use as objects from a possible 463. plFiberPlate : 42 possible sky positions to use as objects from a possible 462. plFiberPlate : 25 possible sky positions to use as objects from a possible 461. plFiberPlate : 17 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 9 possible sky positions to use as objects from a possible 458. plFiberPlate : 8 possible sky positions to use as objects from a possible 457. plFiberPlate : 10 possible sky positions to use as objects from a possible 456. plFiberPlate : 38 possible sky positions to use as objects from a possible 455. plFiberPlate : 44 possible sky positions to use as objects from a possible 454. plFiberPlate : 58 possible sky positions to use as objects from a possible 453. plFiberPlate : 37 possible sky positions to use as objects from a possible 452. plFiberPlate : 36 possible sky positions to use as objects from a possible 451. plFiberPlate : 20 possible sky positions to use as objects from a possible 450. plFiberPlate : 29 possible sky positions to use as objects from a possible 449. plFiberPlate : 76 possible sky positions to use as objects from a possible 448. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1174.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1175.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1175.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.11.1/plPlugMapP-1176.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 105 2 18 66 3 7 31 4 2 16 5 21 95 6 19 99 7 19 94 8 19 109 9 12 94 10 20 97 11 25 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 20 5 166 31 plFiberPlate : adding spectro-photo std with objId = 3226 20 3 166 8 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 156 149 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 162 111 plFiberPlate : adding spectro-photo std with objId = 3226 20 2 170 168 plFiberPlate : adding spectro-photo std with objId = 3225 20 4 308 139 plFiberPlate : adding spectro-photo std with objId = 3225 20 5 298 214 plFiberPlate : adding spectro-photo std with objId = 3226 20 4 159 12 plFiberPlate : 25 possible sky positions to use as objects from a possible 438. plFiberPlate : 20 possible sky positions to use as objects from a possible 437. plFiberPlate : 17 possible sky positions to use as objects from a possible 436. plFiberPlate : 15 possible sky positions to use as objects from a possible 435. plFiberPlate : 15 possible sky positions to use as objects from a possible 434. plFiberPlate : 9 possible sky positions to use as objects from a possible 433. plFiberPlate : 26 possible sky positions to use as objects from a possible 432. plFiberPlate : 23 possible sky positions to use as objects from a possible 431. plFiberPlate : 18 possible sky positions to use as objects from a possible 430. plFiberPlate : 12 possible sky positions to use as objects from a possible 429. plFiberPlate : 9 possible sky positions to use as objects from a possible 428. plFiberPlate : 14 possible sky positions to use as objects from a possible 427. plFiberPlate : 3 possible sky positions to use as objects from a possible 426. plFiberPlate : 3 possible sky positions to use as objects from a possible 425. plFiberPlate : 3 possible sky positions to use as objects from a possible 424. plFiberPlate : 19 possible sky positions to use as objects from a possible 423. plFiberPlate : 38 possible sky positions to use as objects from a possible 422. plFiberPlate : 17 possible sky positions to use as objects from a possible 421. plFiberPlate : 17 possible sky positions to use as objects from a possible 420. plFiberPlate : 5 possible sky positions to use as objects from a possible 419. plFiberPlate : 4 possible sky positions to use as objects from a possible 418. plFiberPlate : 2 possible sky positions to use as objects from a possible 417. plFiberPlate : 6 possible sky positions to use as objects from a possible 416. plFiberPlate : 7 possible sky positions to use as objects from a possible 415. plFiberPlate : 10 possible sky positions to use as objects from a possible 414. plFiberPlate : 44 possible sky positions to use as objects from a possible 413. plFiberPlate : 56 possible sky positions to use as objects from a possible 412. plFiberPlate : 43 possible sky positions to use as objects from a possible 411. plFiberPlate : 14 possible sky positions to use as objects from a possible 410. plFiberPlate : 7 possible sky positions to use as objects from a possible 409. plFiberPlate : 11 possible sky positions to use as objects from a possible 408. plFiberPlate : 18 possible sky positions to use as objects from a possible 407. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1175.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1176.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.11.1/plOverlay-1176.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Nov 13 18:37:14 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_117/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_117/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 19 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 2 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 2 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1158.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.6309,7.1244) and (11.09,5.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1158.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1158.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1159.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.4566,-2.5832) and (-12.65,-1.91) plMakeFanucCodes : fixed path between (9.3074,-8.6706) and (10.46,-7.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1159.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1159.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1160.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1160.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1160.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1161.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1161.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1161.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1162.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.9908,9.1001) and (4.80,11.04) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1162.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1162.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1163.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1163.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1163.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1164.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.2206,-7.6658) and (11.27,-5.66) plMakeFanucCodes : fixed path between (-11.0044,5.7509) and (-11.95,4.50) plMakeFanucCodes : fixed path between (-11.9488,4.5008) and (-12.37,2.13) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1164.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1164.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1165.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.0457,-12.0112) and (2.85,-12.48) plMakeFanucCodes : fixed path between (2.8468,-12.4801) and (2.04,-12.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1165.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1165.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1166.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1166.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1166.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1167.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1167.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1167.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1168.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-2.3682,12.1006) and (-1.15,12.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1168.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1168.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1169.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.0901,-4.1038) and (12.35,-3.29) plMakeFanucCodes : fixed path between (-10.3450,7.3501) and (-11.11,5.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1169.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1169.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1170.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1170.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1170.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1171.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.3672,-3.0483) and (12.57,-2.40) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1171.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1171.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1172.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.8199,-11.4906) and (3.56,-12.26) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1172.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1172.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1173.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.9111,11.3416) and (4.72,11.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1173.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.5249,7.0650) and (-12.36,-0.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1173.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1174.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1174.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1174.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1175.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1175.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1175.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1176.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1176.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.5905,4.4111) and (12.39,-1.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.11.1/plFanuc-1176.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Nov 13 18:38:26 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_117/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_117/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e85be8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 19 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1158 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 664 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1159 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1160 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1161 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1162 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1163 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1164 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1165 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1166 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1167 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1168 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1169 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1170 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1171 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1172 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1173 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1174 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1175 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1176 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Nov 13 18:39:03 CST 2002 Begin running plateEnder dr2002.11.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_117/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_117/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2002.11.1 -morePipes 1 failed. PS: Read file for stderr output of this job.