Sender: LSF System Subject: Job 6290: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Dec 9 12:19:18 2002 Results reported at Mon Dec 9 12:22:49 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_131 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2002.12.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 186.57 sec. Max Memory : 10 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Dec 9 12:19:20 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Dec 9 12:19:22 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/dp/v14_131/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Mon Dec 9 12:19:22 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_131/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Mon Dec 9 12:19:22 CST 2002 Begin running plate --------------------------------------------------------------- Mon Dec 9 12:19:22 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e4a968 makePlates : beginning loop over plObs chain; makePlates : making 13 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0838.par makePlates : plateInfo struct for plate 1184 : (h4).mjd 52662 (h4).raCen 124.1467 (h4).decCen 3.587746 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.147 3.588 124.147 5.088 plMakePlateFromTile : mjd of obs : 52662.699328 Observed HA/dec of plate center, fiducial point (deg) : -4.002 3.588 -4.003 5.088 The rotation angle of the fid. point is 6.873385 plMakePlateFromTile : beginning loop over 906 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0839.par makePlates : plateInfo struct for plate 1185 : (h4).mjd 52662 (h4).raCen 126.2706 (h4).decCen 4.037543 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 126.271 4.038 126.271 5.538 plMakePlateFromTile : mjd of obs : 52662.699670 Observed HA/dec of plate center, fiducial point (deg) : -6.002 4.037 -6.003 5.537 The rotation angle of the fid. point is 10.368493 plMakePlateFromTile : beginning loop over 967 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0840.par makePlates : plateInfo struct for plate 1186 : (h4).mjd 52662 (h4).raCen 128.5532 (h4).decCen 4.766646 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.553 4.767 128.553 6.267 plMakePlateFromTile : mjd of obs : 52662.700452 Observed HA/dec of plate center, fiducial point (deg) : -8.002 4.766 -8.003 6.265 The rotation angle of the fid. point is 13.987860 plMakePlateFromTile : beginning loop over 1328 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0845.par makePlates : plateInfo struct for plate 1187 : (h4).mjd 52662 (h4).raCen 130.0685 (h4).decCen 5.772212 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.069 5.772 130.069 7.272 plMakePlateFromTile : mjd of obs : 52662.699108 Observed HA/dec of plate center, fiducial point (deg) : -10.002 5.771 -10.003 7.270 The rotation angle of the fid. point is 17.792826 plMakePlateFromTile : beginning loop over 1208 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-239.18, 185.64, 7.2) and (-239.61, 185.08, 6.0) checkLTHo : distance = 0.706, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-239.18, 185.64, 7.2) checkLTHo : collision between LIGHT_TRAPs (-29.53, -1.72, 7.3) and (-28.66, -0.36, 8.5) checkLTHo : distance = 1.609, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-28.66, -0.36, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0841.par makePlates : plateInfo struct for plate 1188 : (h4).mjd 52662 (h4).raCen 130.846 (h4).decCen 4.617555 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.846 4.618 130.846 6.118 plMakePlateFromTile : mjd of obs : 52662.701261 Observed HA/dec of plate center, fiducial point (deg) : -10.002 4.616 -10.003 6.116 The rotation angle of the fid. point is 17.170700 plMakePlateFromTile : beginning loop over 1285 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-198.34, 250.20, 7.3) and (-197.47, 251.57, 8.5) checkLTHo : distance = 1.616, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-197.47, 251.57, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0846.par makePlates : plateInfo struct for plate 1189 : (h4).mjd 52662 (h4).raCen 132.9312 (h4).decCen 6.353188 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.931 6.353 132.931 7.853 plMakePlateFromTile : mjd of obs : 52662.701497 Observed HA/dec of plate center, fiducial point (deg) : -12.002 6.351 -12.003 7.850 The rotation angle of the fid. point is 21.370977 plMakePlateFromTile : beginning loop over 1139 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0842.par makePlates : plateInfo struct for plate 1190 : (h4).mjd 52662 (h4).raCen 133.3652 (h4).decCen 4.706575 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.365 4.707 133.365 6.207 plMakePlateFromTile : mjd of obs : 52662.780286 Observed HA/dec of plate center, fiducial point (deg) : 15.998 4.705 15.997 6.204 The rotation angle of the fid. point is -26.074404 plMakePlateFromTile : beginning loop over 1233 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0847.par makePlates : plateInfo struct for plate 1191 : (h4).mjd 52662 (h4).raCen 135.8348 (h4).decCen 6.693597 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.835 6.694 135.835 8.194 plMakePlateFromTile : mjd of obs : 52662.781586 Observed HA/dec of plate center, fiducial point (deg) : 13.998 6.690 13.997 8.190 The rotation angle of the fid. point is -24.662758 plMakePlateFromTile : beginning loop over 1198 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0843.par makePlates : plateInfo struct for plate 1192 : (h4).mjd 52662 (h4).raCen 135.9279 (h4).decCen 5.11985 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.928 5.120 135.928 6.620 plMakePlateFromTile : mjd of obs : 52662.781843 Observed HA/dec of plate center, fiducial point (deg) : 13.998 5.117 13.997 6.617 The rotation angle of the fid. point is -23.544166 plMakePlateFromTile : beginning loop over 1294 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0844.par makePlates : plateInfo struct for plate 1193 : (h4).mjd 52662 (h4).raCen 138.1019 (h4).decCen 5.425838 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 138.102 5.426 138.102 6.926 plMakePlateFromTile : mjd of obs : 52662.779552 Observed HA/dec of plate center, fiducial point (deg) : 10.998 5.423 10.997 6.922 The rotation angle of the fid. point is -19.173360 plMakePlateFromTile : beginning loop over 1340 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0848.par makePlates : plateInfo struct for plate 1194 : (h4).mjd 52662 (h4).raCen 138.5381 (h4).decCen 6.740302 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 138.538 6.740 138.538 8.240 plMakePlateFromTile : mjd of obs : 52662.780761 Observed HA/dec of plate center, fiducial point (deg) : 10.998 6.736 10.997 8.236 The rotation angle of the fid. point is -19.981141 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0849.par makePlates : plateInfo struct for plate 1195 : (h4).mjd 52662 (h4).raCen 140.9855 (h4).decCen 7.303601 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.986 7.304 140.986 8.804 plMakePlateFromTile : mjd of obs : 52662.781998 Observed HA/dec of plate center, fiducial point (deg) : 8.998 7.299 8.997 8.798 The rotation angle of the fid. point is -16.935863 plMakePlateFromTile : beginning loop over 1225 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (180.82, -233.13, 7.6) and (180.82, -233.02, 7.7) checkLTHo : distance = 0.112, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(180.82, -233.02, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk56/complete//plPlugMapT-0850.par makePlates : plateInfo struct for plate 1196 : (h4).mjd 52662 (h4).raCen 143.3939 (h4).decCen 7.493552 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.394 7.494 143.394 8.994 plMakePlateFromTile : mjd of obs : 52662.821922 Observed HA/dec of plate center, fiducial point (deg) : 20.998 7.489 20.997 8.988 The rotation angle of the fid. point is -34.728027 plMakePlateFromTile : beginning loop over 1216 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Dec 9 12:19:59 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 13 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1184.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 30 2 0 2 3 1 4 4 15 38 5 10 40 6 3 8 7 1 14 8 19 48 9 7 45 10 15 47 11 7 25 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 70 92 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 74 162 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 63 158 plFiberPlate : adding spectro-photo std with objId = 2986 0 5 37 84 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 65 87 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 70 49 plFiberPlate : adding spectro-photo std with objId = 3015 0 3 60 134 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 41 272 plFiberPlate : 48 possible sky positions to use as objects from a possible 182. plFiberPlate : 38 possible sky positions to use as objects from a possible 181. plFiberPlate : 29 possible sky positions to use as objects from a possible 180. plFiberPlate : 13 possible sky positions to use as objects from a possible 179. plFiberPlate : 10 possible sky positions to use as objects from a possible 178. plFiberPlate : 7 possible sky positions to use as objects from a possible 177. plFiberPlate : 10 possible sky positions to use as objects from a possible 176. plFiberPlate : 27 possible sky positions to use as objects from a possible 175. plFiberPlate : 15 possible sky positions to use as objects from a possible 174. plFiberPlate : 14 possible sky positions to use as objects from a possible 173. plFiberPlate : 6 possible sky positions to use as objects from a possible 172. plFiberPlate : 7 possible sky positions to use as objects from a possible 171. plFiberPlate : 3 possible sky positions to use as objects from a possible 170. plFiberPlate : 2 possible sky positions to use as objects from a possible 169. plFiberPlate : 4 possible sky positions to use as objects from a possible 168. plFiberPlate : 6 possible sky positions to use as objects from a possible 167. plFiberPlate : 16 possible sky positions to use as objects from a possible 166. plFiberPlate : 16 possible sky positions to use as objects from a possible 165. plFiberPlate : 8 possible sky positions to use as objects from a possible 164. plFiberPlate : 5 possible sky positions to use as objects from a possible 163. plFiberPlate : 5 possible sky positions to use as objects from a possible 162. plFiberPlate : 5 possible sky positions to use as objects from a possible 161. plFiberPlate : 8 possible sky positions to use as objects from a possible 160. plFiberPlate : 4 possible sky positions to use as objects from a possible 159. plFiberPlate : 6 possible sky positions to use as objects from a possible 158. plFiberPlate : 7 possible sky positions to use as objects from a possible 157. plFiberPlate : 5 possible sky positions to use as objects from a possible 156. plFiberPlate : 3 possible sky positions to use as objects from a possible 155. plFiberPlate : 4 possible sky positions to use as objects from a possible 154. plFiberPlate : 4 possible sky positions to use as objects from a possible 153. plFiberPlate : 0 possible sky positions to use as objects from a possible 152. plFiberPlate: No sky found for bundle at 187.016 136.395, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 152. plFiberPlate: No sky found for bundle at 187.016 136.395, increase box by 20 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 152. plFiberPlate : 13 possible sky positions to use as objects from a possible 151. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1184.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1184.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1185.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 64 2 3 18 3 12 24 4 27 57 5 7 27 6 0 1 7 0 7 8 10 51 9 6 21 10 26 77 11 13 61 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 84 153 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 88 15 plFiberPlate : adding spectro-photo std with objId = 3015 0 3 88 76 plFiberPlate : adding spectro-photo std with objId = 2986 0 5 56 161 plFiberPlate : adding spectro-photo std with objId = 3015 0 3 87 119 plFiberPlate : adding spectro-photo std with objId = 2986 0 5 56 134 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 52 69 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 59 30 plFiberPlate : 72 possible sky positions to use as objects from a possible 225. plFiberPlate : 40 possible sky positions to use as objects from a possible 224. plFiberPlate : 31 possible sky positions to use as objects from a possible 223. plFiberPlate : 27 possible sky positions to use as objects from a possible 222. plFiberPlate : 9 possible sky positions to use as objects from a possible 221. plFiberPlate : 19 possible sky positions to use as objects from a possible 220. plFiberPlate : 18 possible sky positions to use as objects from a possible 219. plFiberPlate : 33 possible sky positions to use as objects from a possible 218. plFiberPlate : 24 possible sky positions to use as objects from a possible 217. plFiberPlate : 16 possible sky positions to use as objects from a possible 216. plFiberPlate : 8 possible sky positions to use as objects from a possible 215. plFiberPlate : 7 possible sky positions to use as objects from a possible 214. plFiberPlate : 5 possible sky positions to use as objects from a possible 213. plFiberPlate : 11 possible sky positions to use as objects from a possible 212. plFiberPlate : 8 possible sky positions to use as objects from a possible 211. plFiberPlate : 13 possible sky positions to use as objects from a possible 210. plFiberPlate : 22 possible sky positions to use as objects from a possible 209. plFiberPlate : 7 possible sky positions to use as objects from a possible 208. plFiberPlate : 6 possible sky positions to use as objects from a possible 207. plFiberPlate : 3 possible sky positions to use as objects from a possible 206. plFiberPlate : 4 possible sky positions to use as objects from a possible 205. plFiberPlate : 7 possible sky positions to use as objects from a possible 204. plFiberPlate : 1 possible sky positions to use as objects from a possible 203. plFiberPlate : 12 possible sky positions to use as objects from a possible 202. plFiberPlate : 6 possible sky positions to use as objects from a possible 201. plFiberPlate : 5 possible sky positions to use as objects from a possible 200. plFiberPlate : 1 possible sky positions to use as objects from a possible 199. plFiberPlate: No sky found for bundle at -86.540 83.868, increase box by 10 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 199. plFiberPlate: No sky found for bundle at -86.540 83.868, increase box by 20 percent. plFiberPlate : 4 possible sky positions to use as objects from a possible 199. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 80 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 90 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 198. plFiberPlate: No sky found for bundle at -27.794 86.546, increase box by 100 percent. plFiberPlate : 4 possible sky positions to use as objects from a possible 198. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 197. plFiberPlate: No sky found for bundle at 26.433 102.088, increase box by 120 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 197. plFiberPlate : 3 possible sky positions to use as objects from a possible 196. plFiberPlate : 2 possible sky positions to use as objects from a possible 195. plFiberPlate : 13 possible sky positions to use as objects from a possible 194. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1184.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1185.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1185.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1186.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 40 113 2 28 69 3 23 53 4 21 81 5 23 81 6 20 82 7 24 81 8 29 103 9 33 91 10 34 116 11 35 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 0 3 88 76 plFiberPlate : adding spectro-photo std with objId = 3015 0 3 94 72 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 68 156 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 59 30 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 61 62 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 61 188 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 61 29 plFiberPlate : adding spectro-photo std with objId = 3478 20 4 79 215 plFiberPlate : 99 possible sky positions to use as objects from a possible 475. plFiberPlate : 47 possible sky positions to use as objects from a possible 474. plFiberPlate : 22 possible sky positions to use as objects from a possible 473. plFiberPlate : 11 possible sky positions to use as objects from a possible 472. plFiberPlate : 34 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : 35 possible sky positions to use as objects from a possible 469. plFiberPlate : 67 possible sky positions to use as objects from a possible 468. plFiberPlate : 42 possible sky positions to use as objects from a possible 467. plFiberPlate : 31 possible sky positions to use as objects from a possible 466. plFiberPlate : 24 possible sky positions to use as objects from a possible 465. plFiberPlate : 13 possible sky positions to use as objects from a possible 464. plFiberPlate : 10 possible sky positions to use as objects from a possible 463. plFiberPlate : 17 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : 40 possible sky positions to use as objects from a possible 460. plFiberPlate : 56 possible sky positions to use as objects from a possible 459. plFiberPlate : 43 possible sky positions to use as objects from a possible 458. plFiberPlate : 25 possible sky positions to use as objects from a possible 457. plFiberPlate : 16 possible sky positions to use as objects from a possible 456. plFiberPlate : 8 possible sky positions to use as objects from a possible 455. plFiberPlate : 5 possible sky positions to use as objects from a possible 454. plFiberPlate : 25 possible sky positions to use as objects from a possible 453. plFiberPlate : 14 possible sky positions to use as objects from a possible 452. plFiberPlate : 38 possible sky positions to use as objects from a possible 451. plFiberPlate : 40 possible sky positions to use as objects from a possible 450. plFiberPlate : 47 possible sky positions to use as objects from a possible 449. plFiberPlate : 43 possible sky positions to use as objects from a possible 448. plFiberPlate : 30 possible sky positions to use as objects from a possible 447. plFiberPlate : 18 possible sky positions to use as objects from a possible 446. plFiberPlate : 20 possible sky positions to use as objects from a possible 445. plFiberPlate : 31 possible sky positions to use as objects from a possible 444. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1185.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1186.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1186.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1187.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 97 2 16 77 3 16 70 4 28 93 5 9 63 6 2 18 7 5 30 8 14 82 9 12 64 10 33 118 11 32 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 66 171 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 76 214 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 61 29 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 61 62 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 70 19 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 61 188 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 65 179 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 81 122 plFiberPlate : 89 possible sky positions to use as objects from a possible 411. plFiberPlate : 78 possible sky positions to use as objects from a possible 410. plFiberPlate : 40 possible sky positions to use as objects from a possible 409. plFiberPlate : 34 possible sky positions to use as objects from a possible 408. plFiberPlate : 22 possible sky positions to use as objects from a possible 407. plFiberPlate : 31 possible sky positions to use as objects from a possible 406. plFiberPlate : 36 possible sky positions to use as objects from a possible 405. plFiberPlate : 72 possible sky positions to use as objects from a possible 404. plFiberPlate : 49 possible sky positions to use as objects from a possible 403. plFiberPlate : 46 possible sky positions to use as objects from a possible 402. plFiberPlate : 37 possible sky positions to use as objects from a possible 401. plFiberPlate : 12 possible sky positions to use as objects from a possible 400. plFiberPlate : 13 possible sky positions to use as objects from a possible 399. plFiberPlate : 17 possible sky positions to use as objects from a possible 398. plFiberPlate : 14 possible sky positions to use as objects from a possible 397. plFiberPlate : 20 possible sky positions to use as objects from a possible 396. plFiberPlate : 60 possible sky positions to use as objects from a possible 395. plFiberPlate : 46 possible sky positions to use as objects from a possible 394. plFiberPlate : 21 possible sky positions to use as objects from a possible 393. plFiberPlate : 14 possible sky positions to use as objects from a possible 392. plFiberPlate : 8 possible sky positions to use as objects from a possible 391. plFiberPlate : 8 possible sky positions to use as objects from a possible 390. plFiberPlate : 9 possible sky positions to use as objects from a possible 389. plFiberPlate : 16 possible sky positions to use as objects from a possible 388. plFiberPlate : 13 possible sky positions to use as objects from a possible 387. plFiberPlate : 18 possible sky positions to use as objects from a possible 386. plFiberPlate : 18 possible sky positions to use as objects from a possible 385. plFiberPlate : 10 possible sky positions to use as objects from a possible 384. plFiberPlate : 11 possible sky positions to use as objects from a possible 383. plFiberPlate : 9 possible sky positions to use as objects from a possible 382. plFiberPlate : 7 possible sky positions to use as objects from a possible 381. plFiberPlate : 13 possible sky positions to use as objects from a possible 380. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1186.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1187.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1187.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1188.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 80 2 11 28 3 12 42 4 24 85 5 31 108 6 39 91 7 32 74 8 28 81 9 39 98 10 32 93 11 19 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2986 0 5 92 31 plFiberPlate : adding spectro-photo std with objId = 2986 0 5 81 97 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 118 188 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 113 152 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 76 214 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 70 19 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 81 122 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 89 62 plFiberPlate : 89 possible sky positions to use as objects from a possible 443. plFiberPlate : 57 possible sky positions to use as objects from a possible 442. plFiberPlate : 34 possible sky positions to use as objects from a possible 441. plFiberPlate : 17 possible sky positions to use as objects from a possible 440. plFiberPlate : 23 possible sky positions to use as objects from a possible 439. plFiberPlate : 18 possible sky positions to use as objects from a possible 438. plFiberPlate : 28 possible sky positions to use as objects from a possible 437. plFiberPlate : 56 possible sky positions to use as objects from a possible 436. plFiberPlate : 38 possible sky positions to use as objects from a possible 435. plFiberPlate : 15 possible sky positions to use as objects from a possible 434. plFiberPlate : 6 possible sky positions to use as objects from a possible 433. plFiberPlate : 4 possible sky positions to use as objects from a possible 432. plFiberPlate : 21 possible sky positions to use as objects from a possible 431. plFiberPlate : 2 possible sky positions to use as objects from a possible 430. plFiberPlate : 8 possible sky positions to use as objects from a possible 429. plFiberPlate : 16 possible sky positions to use as objects from a possible 428. plFiberPlate : 53 possible sky positions to use as objects from a possible 427. plFiberPlate : 33 possible sky positions to use as objects from a possible 426. plFiberPlate : 12 possible sky positions to use as objects from a possible 425. plFiberPlate : 7 possible sky positions to use as objects from a possible 424. plFiberPlate : 11 possible sky positions to use as objects from a possible 423. plFiberPlate : 6 possible sky positions to use as objects from a possible 422. plFiberPlate : 6 possible sky positions to use as objects from a possible 421. plFiberPlate : 6 possible sky positions to use as objects from a possible 420. plFiberPlate : 11 possible sky positions to use as objects from a possible 419. plFiberPlate : 55 possible sky positions to use as objects from a possible 418. plFiberPlate : 42 possible sky positions to use as objects from a possible 417. plFiberPlate : 33 possible sky positions to use as objects from a possible 416. plFiberPlate : 22 possible sky positions to use as objects from a possible 415. plFiberPlate : 32 possible sky positions to use as objects from a possible 414. plFiberPlate : 4 possible sky positions to use as objects from a possible 413. plFiberPlate : 10 possible sky positions to use as objects from a possible 412. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1187.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1188.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1188.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1189.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 118 2 16 93 3 19 78 4 26 78 5 2 46 6 0 3 7 1 10 8 12 61 9 4 46 10 36 136 11 25 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3478 20 5 106 127 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 93 154 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 83 23 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 84 90 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 86 59 plFiberPlate : adding spectro-photo std with objId = 3478 20 4 114 17 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 126 216 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 112 175 plFiberPlate : 98 possible sky positions to use as objects from a possible 387. plFiberPlate : 61 possible sky positions to use as objects from a possible 386. plFiberPlate : 24 possible sky positions to use as objects from a possible 385. plFiberPlate : 21 possible sky positions to use as objects from a possible 384. plFiberPlate : 46 possible sky positions to use as objects from a possible 383. plFiberPlate : 32 possible sky positions to use as objects from a possible 382. plFiberPlate : 26 possible sky positions to use as objects from a possible 381. plFiberPlate : 52 possible sky positions to use as objects from a possible 380. plFiberPlate : 49 possible sky positions to use as objects from a possible 379. plFiberPlate : 32 possible sky positions to use as objects from a possible 378. plFiberPlate : 29 possible sky positions to use as objects from a possible 377. plFiberPlate : 21 possible sky positions to use as objects from a possible 376. plFiberPlate : 24 possible sky positions to use as objects from a possible 375. plFiberPlate : 13 possible sky positions to use as objects from a possible 374. plFiberPlate : 9 possible sky positions to use as objects from a possible 373. plFiberPlate : 10 possible sky positions to use as objects from a possible 372. plFiberPlate : 34 possible sky positions to use as objects from a possible 371. plFiberPlate : 31 possible sky positions to use as objects from a possible 370. plFiberPlate : 29 possible sky positions to use as objects from a possible 369. plFiberPlate : 9 possible sky positions to use as objects from a possible 368. plFiberPlate : 2 possible sky positions to use as objects from a possible 367. plFiberPlate : 12 possible sky positions to use as objects from a possible 366. plFiberPlate : 10 possible sky positions to use as objects from a possible 365. plFiberPlate : 7 possible sky positions to use as objects from a possible 364. plFiberPlate : 10 possible sky positions to use as objects from a possible 363. plFiberPlate : 11 possible sky positions to use as objects from a possible 362. plFiberPlate : 10 possible sky positions to use as objects from a possible 361. plFiberPlate : 7 possible sky positions to use as objects from a possible 360. plFiberPlate : 5 possible sky positions to use as objects from a possible 359. plFiberPlate : 7 possible sky positions to use as objects from a possible 358. plFiberPlate : 6 possible sky positions to use as objects from a possible 357. plFiberPlate : 9 possible sky positions to use as objects from a possible 356. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1188.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1189.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1189.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1190.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 77 2 6 25 3 8 42 4 15 90 5 26 116 6 22 91 7 9 73 8 10 89 9 11 104 10 19 98 11 14 68 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 97 26 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 97 143 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 127 9 plFiberPlate : adding spectro-photo std with objId = 3015 0 5 129 13 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 126 216 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 112 175 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 135 88 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 89 62 plFiberPlate : 96 possible sky positions to use as objects from a possible 449. plFiberPlate : 74 possible sky positions to use as objects from a possible 448. plFiberPlate : 52 possible sky positions to use as objects from a possible 447. plFiberPlate : 43 possible sky positions to use as objects from a possible 446. plFiberPlate : 17 possible sky positions to use as objects from a possible 445. plFiberPlate : 34 possible sky positions to use as objects from a possible 444. plFiberPlate : 31 possible sky positions to use as objects from a possible 443. plFiberPlate : 51 possible sky positions to use as objects from a possible 442. plFiberPlate : 28 possible sky positions to use as objects from a possible 441. plFiberPlate : 18 possible sky positions to use as objects from a possible 440. plFiberPlate : 13 possible sky positions to use as objects from a possible 439. plFiberPlate : 14 possible sky positions to use as objects from a possible 438. plFiberPlate : 4 possible sky positions to use as objects from a possible 437. plFiberPlate : 5 possible sky positions to use as objects from a possible 436. plFiberPlate : 17 possible sky positions to use as objects from a possible 435. plFiberPlate : 14 possible sky positions to use as objects from a possible 434. plFiberPlate : 66 possible sky positions to use as objects from a possible 433. plFiberPlate : 40 possible sky positions to use as objects from a possible 432. plFiberPlate : 22 possible sky positions to use as objects from a possible 431. plFiberPlate : 11 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 3 possible sky positions to use as objects from a possible 428. plFiberPlate : 6 possible sky positions to use as objects from a possible 427. plFiberPlate : 6 possible sky positions to use as objects from a possible 426. plFiberPlate : 17 possible sky positions to use as objects from a possible 425. plFiberPlate : 64 possible sky positions to use as objects from a possible 424. plFiberPlate : 43 possible sky positions to use as objects from a possible 423. plFiberPlate : 20 possible sky positions to use as objects from a possible 422. plFiberPlate : 16 possible sky positions to use as objects from a possible 421. plFiberPlate : 11 possible sky positions to use as objects from a possible 420. plFiberPlate : 6 possible sky positions to use as objects from a possible 419. plFiberPlate : 10 possible sky positions to use as objects from a possible 418. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1189.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1190.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1190.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1191.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 109 2 10 96 3 14 91 4 28 97 5 12 63 6 0 12 7 1 30 8 5 77 9 4 57 10 28 152 11 22 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 100 46 plFiberPlate : adding spectro-photo std with objId = 3478 20 3 133 76 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 109 75 plFiberPlate : adding spectro-photo std with objId = 3478 20 3 134 170 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 132 85 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 102 95 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 126 31 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 148 12 plFiberPlate : 127 possible sky positions to use as objects from a possible 438. plFiberPlate : 79 possible sky positions to use as objects from a possible 437. plFiberPlate : 57 possible sky positions to use as objects from a possible 436. plFiberPlate : 13 possible sky positions to use as objects from a possible 435. plFiberPlate : 29 possible sky positions to use as objects from a possible 434. plFiberPlate : 31 possible sky positions to use as objects from a possible 433. plFiberPlate : 48 possible sky positions to use as objects from a possible 432. plFiberPlate : 67 possible sky positions to use as objects from a possible 431. plFiberPlate : 54 possible sky positions to use as objects from a possible 430. plFiberPlate : 48 possible sky positions to use as objects from a possible 429. plFiberPlate : 35 possible sky positions to use as objects from a possible 428. plFiberPlate : 23 possible sky positions to use as objects from a possible 427. plFiberPlate : 23 possible sky positions to use as objects from a possible 426. plFiberPlate : 14 possible sky positions to use as objects from a possible 425. plFiberPlate : 3 possible sky positions to use as objects from a possible 424. plFiberPlate : 12 possible sky positions to use as objects from a possible 423. plFiberPlate : 49 possible sky positions to use as objects from a possible 422. plFiberPlate : 37 possible sky positions to use as objects from a possible 421. plFiberPlate : 20 possible sky positions to use as objects from a possible 420. plFiberPlate : 8 possible sky positions to use as objects from a possible 419. plFiberPlate : 8 possible sky positions to use as objects from a possible 418. plFiberPlate : 6 possible sky positions to use as objects from a possible 417. plFiberPlate : 8 possible sky positions to use as objects from a possible 416. plFiberPlate : 5 possible sky positions to use as objects from a possible 415. plFiberPlate : 3 possible sky positions to use as objects from a possible 414. plFiberPlate : 16 possible sky positions to use as objects from a possible 413. plFiberPlate : 15 possible sky positions to use as objects from a possible 412. plFiberPlate : 8 possible sky positions to use as objects from a possible 411. plFiberPlate : 17 possible sky positions to use as objects from a possible 410. plFiberPlate : 4 possible sky positions to use as objects from a possible 409. plFiberPlate : 11 possible sky positions to use as objects from a possible 408. plFiberPlate : 10 possible sky positions to use as objects from a possible 407. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1190.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1191.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1191.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1192.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 88 2 4 47 3 15 47 4 28 84 5 22 113 6 28 95 7 20 88 8 19 105 9 24 104 10 24 121 11 13 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 151 30 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 120 20 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 142 182 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 122 59 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 132 85 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 126 31 plFiberPlate : adding spectro-photo std with objId = 2986 0 4 109 33 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 148 12 plFiberPlate : 99 possible sky positions to use as objects from a possible 497. plFiberPlate : 59 possible sky positions to use as objects from a possible 496. plFiberPlate : 38 possible sky positions to use as objects from a possible 495. plFiberPlate : 26 possible sky positions to use as objects from a possible 494. plFiberPlate : 20 possible sky positions to use as objects from a possible 493. plFiberPlate : 20 possible sky positions to use as objects from a possible 492. plFiberPlate : 30 possible sky positions to use as objects from a possible 491. plFiberPlate : 60 possible sky positions to use as objects from a possible 490. plFiberPlate : 34 possible sky positions to use as objects from a possible 489. plFiberPlate : 25 possible sky positions to use as objects from a possible 488. plFiberPlate : 13 possible sky positions to use as objects from a possible 487. plFiberPlate : 7 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 7 possible sky positions to use as objects from a possible 484. plFiberPlate : 10 possible sky positions to use as objects from a possible 483. plFiberPlate : 13 possible sky positions to use as objects from a possible 482. plFiberPlate : 77 possible sky positions to use as objects from a possible 481. plFiberPlate : 60 possible sky positions to use as objects from a possible 480. plFiberPlate : 47 possible sky positions to use as objects from a possible 479. plFiberPlate : 29 possible sky positions to use as objects from a possible 478. plFiberPlate : 20 possible sky positions to use as objects from a possible 477. plFiberPlate : 19 possible sky positions to use as objects from a possible 476. plFiberPlate : 3 possible sky positions to use as objects from a possible 475. plFiberPlate : 16 possible sky positions to use as objects from a possible 474. plFiberPlate : 13 possible sky positions to use as objects from a possible 473. plFiberPlate : 57 possible sky positions to use as objects from a possible 472. plFiberPlate : 39 possible sky positions to use as objects from a possible 471. plFiberPlate : 37 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 23 possible sky positions to use as objects from a possible 468. plFiberPlate : 24 possible sky positions to use as objects from a possible 467. plFiberPlate : 12 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1191.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1192.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1192.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1193.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 99 2 7 59 3 18 61 4 24 100 5 28 131 6 15 96 7 16 94 8 19 107 9 26 110 10 31 119 11 18 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 131 23 plFiberPlate : adding spectro-photo std with objId = 3015 0 2 166 23 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 161 147 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 147 135 plFiberPlate : adding spectro-photo std with objId = 2986 0 5 124 136 plFiberPlate : adding spectro-photo std with objId = 2986 0 3 122 59 plFiberPlate : adding spectro-photo std with objId = 2986 0 2 125 45 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 123 100 plFiberPlate : 113 possible sky positions to use as objects from a possible 542. plFiberPlate : 57 possible sky positions to use as objects from a possible 541. plFiberPlate : 39 possible sky positions to use as objects from a possible 540. plFiberPlate : 29 possible sky positions to use as objects from a possible 539. plFiberPlate : 23 possible sky positions to use as objects from a possible 538. plFiberPlate : 6 possible sky positions to use as objects from a possible 537. plFiberPlate : 29 possible sky positions to use as objects from a possible 536. plFiberPlate : 84 possible sky positions to use as objects from a possible 535. plFiberPlate : 60 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 18 possible sky positions to use as objects from a possible 532. plFiberPlate : 11 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 11 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : 87 possible sky positions to use as objects from a possible 526. plFiberPlate : 67 possible sky positions to use as objects from a possible 525. plFiberPlate : 42 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 30 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 5 possible sky positions to use as objects from a possible 519. plFiberPlate : 21 possible sky positions to use as objects from a possible 518. plFiberPlate : 46 possible sky positions to use as objects from a possible 517. plFiberPlate : 41 possible sky positions to use as objects from a possible 516. plFiberPlate : 34 possible sky positions to use as objects from a possible 515. plFiberPlate : 21 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : 26 possible sky positions to use as objects from a possible 512. plFiberPlate : 11 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1192.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1193.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1193.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1194.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 122 2 16 97 3 21 91 4 19 109 5 6 95 6 2 49 7 2 56 8 9 87 9 10 88 10 27 155 11 15 121 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 126 13 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 141 2 plFiberPlate : adding spectro-photo std with objId = 3478 20 4 140 119 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 130 71 plFiberPlate : adding spectro-photo std with objId = 3478 20 3 150 41 plFiberPlate : adding spectro-photo std with objId = 3015 0 4 161 147 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 123 100 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 129 22 plFiberPlate : 112 possible sky positions to use as objects from a possible 525. plFiberPlate : 72 possible sky positions to use as objects from a possible 524. plFiberPlate : 55 possible sky positions to use as objects from a possible 523. plFiberPlate : 23 possible sky positions to use as objects from a possible 522. plFiberPlate : 14 possible sky positions to use as objects from a possible 521. plFiberPlate : 12 possible sky positions to use as objects from a possible 520. plFiberPlate : 76 possible sky positions to use as objects from a possible 519. plFiberPlate : 69 possible sky positions to use as objects from a possible 518. plFiberPlate : 53 possible sky positions to use as objects from a possible 517. plFiberPlate : 43 possible sky positions to use as objects from a possible 516. plFiberPlate : 18 possible sky positions to use as objects from a possible 515. plFiberPlate : 21 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 4 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 45 possible sky positions to use as objects from a possible 509. plFiberPlate : 39 possible sky positions to use as objects from a possible 508. plFiberPlate : 26 possible sky positions to use as objects from a possible 507. plFiberPlate : 17 possible sky positions to use as objects from a possible 506. plFiberPlate : 9 possible sky positions to use as objects from a possible 505. plFiberPlate : 4 possible sky positions to use as objects from a possible 504. plFiberPlate : 2 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 23 possible sky positions to use as objects from a possible 500. plFiberPlate : 17 possible sky positions to use as objects from a possible 499. plFiberPlate : 10 possible sky positions to use as objects from a possible 498. plFiberPlate : 14 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 7 possible sky positions to use as objects from a possible 495. plFiberPlate : 8 possible sky positions to use as objects from a possible 494. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1193.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1194.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1194.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1195.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 119 2 21 113 3 15 94 4 10 95 5 2 76 6 1 26 7 0 37 8 5 89 9 1 72 10 24 152 11 19 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 148 10 plFiberPlate : adding spectro-photo std with objId = 3478 20 5 170 30 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 135 93 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 144 53 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 139 14 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 140 68 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 133 80 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 143 114 plFiberPlate : 106 possible sky positions to use as objects from a possible 495. plFiberPlate : 82 possible sky positions to use as objects from a possible 494. plFiberPlate : 69 possible sky positions to use as objects from a possible 493. plFiberPlate : 57 possible sky positions to use as objects from a possible 492. plFiberPlate : 52 possible sky positions to use as objects from a possible 491. plFiberPlate : 18 possible sky positions to use as objects from a possible 490. plFiberPlate : 55 possible sky positions to use as objects from a possible 489. plFiberPlate : 48 possible sky positions to use as objects from a possible 488. plFiberPlate : 41 possible sky positions to use as objects from a possible 487. plFiberPlate : 35 possible sky positions to use as objects from a possible 486. plFiberPlate : 27 possible sky positions to use as objects from a possible 485. plFiberPlate : 6 possible sky positions to use as objects from a possible 484. plFiberPlate : 7 possible sky positions to use as objects from a possible 483. plFiberPlate : 7 possible sky positions to use as objects from a possible 482. plFiberPlate : 7 possible sky positions to use as objects from a possible 481. plFiberPlate : 26 possible sky positions to use as objects from a possible 480. plFiberPlate : 43 possible sky positions to use as objects from a possible 479. plFiberPlate : 26 possible sky positions to use as objects from a possible 478. plFiberPlate : 22 possible sky positions to use as objects from a possible 477. plFiberPlate : 15 possible sky positions to use as objects from a possible 476. plFiberPlate : 8 possible sky positions to use as objects from a possible 475. plFiberPlate : 2 possible sky positions to use as objects from a possible 474. plFiberPlate : 8 possible sky positions to use as objects from a possible 473. plFiberPlate : 6 possible sky positions to use as objects from a possible 472. plFiberPlate : 17 possible sky positions to use as objects from a possible 471. plFiberPlate : 27 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 9 possible sky positions to use as objects from a possible 468. plFiberPlate : 10 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1194.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1195.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1195.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.1/plPlugMapP-1196.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 109 2 9 110 3 14 102 4 17 110 5 7 85 6 4 30 7 2 52 8 5 73 9 5 78 10 24 153 11 20 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3478 20 3 174 156 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 155 35 plFiberPlate : adding spectro-photo std with objId = 3478 20 3 174 116 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 156 57 plFiberPlate : adding spectro-photo std with objId = 3478 20 2 178 50 plFiberPlate : adding spectro-photo std with objId = 3478 20 4 188 91 plFiberPlate : adding spectro-photo std with objId = 3478 20 4 181 63 plFiberPlate : adding spectro-photo std with objId = 3478 20 5 177 46 plFiberPlate : 115 possible sky positions to use as objects from a possible 487. plFiberPlate : 78 possible sky positions to use as objects from a possible 486. plFiberPlate : 70 possible sky positions to use as objects from a possible 485. plFiberPlate : 41 possible sky positions to use as objects from a possible 484. plFiberPlate : 22 possible sky positions to use as objects from a possible 483. plFiberPlate : 23 possible sky positions to use as objects from a possible 482. plFiberPlate : 31 possible sky positions to use as objects from a possible 481. plFiberPlate : 63 possible sky positions to use as objects from a possible 480. plFiberPlate : 54 possible sky positions to use as objects from a possible 479. plFiberPlate : 31 possible sky positions to use as objects from a possible 478. plFiberPlate : 18 possible sky positions to use as objects from a possible 477. plFiberPlate : 14 possible sky positions to use as objects from a possible 476. plFiberPlate : 17 possible sky positions to use as objects from a possible 475. plFiberPlate : 3 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 10 possible sky positions to use as objects from a possible 472. plFiberPlate : 38 possible sky positions to use as objects from a possible 471. plFiberPlate : 31 possible sky positions to use as objects from a possible 470. plFiberPlate : 24 possible sky positions to use as objects from a possible 469. plFiberPlate : 22 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 2 possible sky positions to use as objects from a possible 466. plFiberPlate : 3 possible sky positions to use as objects from a possible 465. plFiberPlate : 17 possible sky positions to use as objects from a possible 464. plFiberPlate : 4 possible sky positions to use as objects from a possible 463. plFiberPlate : 11 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : 4 possible sky positions to use as objects from a possible 460. plFiberPlate : 3 possible sky positions to use as objects from a possible 459. plFiberPlate : 9 possible sky positions to use as objects from a possible 458. plFiberPlate : 14 possible sky positions to use as objects from a possible 457. plFiberPlate : 5 possible sky positions to use as objects from a possible 456. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1195.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1196.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.1/plOverlay-1196.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Dec 9 12:20:41 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 13 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1184.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1184.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1184.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1185.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4182,5.7181) and (11.82,4.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1185.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1185.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1186.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.8868,-8.0109) and (-10.92,-6.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1186.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1186.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1187.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.6095,-10.2559) and (5.52,-10.69) plMakeFanucCodes : fixed path between (-11.4040,-5.5437) and (-11.93,-3.44) plMakeFanucCodes : fixed path between (10.6459,7.0991) and (10.94,6.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1187.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1187.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1188.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.6908,10.8428) and (2.20,12.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1188.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1188.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1189.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1189.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1189.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1190.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1962,-6.0563) and (11.58,-5.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1190.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1190.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1191.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.1568,7.5857) and (11.07,6.25) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1191.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1191.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1192.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1192.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1192.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1193.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1193.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1193.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1194.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.3779,7.4976) and (-10.97,5.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1194.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1194.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1195.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1195.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1195.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1196.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1196.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.1/plFanuc-1196.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Dec 9 12:21:23 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e4b3e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 13 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1184 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1185 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1186 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1187 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1188 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1189 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1190 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1191 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1192 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1193 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1194 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1195 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1196 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Dec 9 12:21:44 CST 2002 Begin running plateEnder dr2002.12.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2002.12.1 -morePipes 1 failed. PS: Read file for stderr output of this job.