Sender: LSF System Subject: Job 33515: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Mar 3 18:03:35 2003 Results reported at Mon Mar 3 18:07:22 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_224 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.03.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 206.21 sec. Max Memory : 10 MB Max Swap : 33 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Mar 3 18:03:36 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Mar 3 18:03:40 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_11_5OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_58/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_224/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_17/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_16/OSF1/bin:/sdss/ups/prd/sdssmath/v5_12/OSF1/bin:/sdss/ups/prd/astrotools/v5_14/OSF1/bin:/sdss/ups/prd/plate/v3_8/OSF1/bin --------------------------------------------------------------- Mon Mar 3 18:03:40 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_11_5OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_224/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_16/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_58/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_8/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_p30054 --------------------------------------------------------------- --------------------------------------------------------------- Mon Mar 3 18:03:40 CST 2003 Begin running plate --------------------------------------------------------------- Mon Mar 3 18:03:40 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e9ece8 makePlates : beginning loop over plObs chain; makePlates : making 14 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0923.par makePlates : plateInfo struct for plate 1295 : (h4).mjd 52997 (h4).raCen 122.8913 (h4).decCen 5.92298 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.891 5.923 122.891 7.423 plMakePlateFromTile : mjd of obs : 52997.700869 Observed HA/dec of plate center, fiducial point (deg) : -32.002 5.923 -32.003 7.422 The rotation angle of the fid. point is 43.803876 plMakePlateFromTile : beginning loop over 888 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0924.par makePlates : plateInfo struct for plate 1296 : (h4).mjd 52997 (h4).raCen 125.6189 (h4).decCen 6.420297 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.619 6.420 125.619 7.920 plMakePlateFromTile : mjd of obs : 52997.783244 Observed HA/dec of plate center, fiducial point (deg) : -5.002 6.417 -5.003 7.917 The rotation angle of the fid. point is 9.386565 plMakePlateFromTile : beginning loop over 963 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0925.par makePlates : plateInfo struct for plate 1297 : (h4).mjd 52997 (h4).raCen 128.378 (h4).decCen 6.91208 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.378 6.912 128.378 8.412 plMakePlateFromTile : mjd of obs : 52997.782574 Observed HA/dec of plate center, fiducial point (deg) : -8.002 6.908 -8.003 8.408 The rotation angle of the fid. point is 15.001757 plMakePlateFromTile : beginning loop over 1196 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (126.68, -62.87, 7.2) and (126.25, -63.43, 6.0) checkLTHo : distance = 0.705, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(126.68, -62.87, 7.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0926.par makePlates : plateInfo struct for plate 1298 : (h4).mjd 52997 (h4).raCen 131.0841 (h4).decCen 7.532867 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.084 7.533 131.084 9.033 plMakePlateFromTile : mjd of obs : 52997.781757 Observed HA/dec of plate center, fiducial point (deg) : -11.002 7.528 -11.003 9.027 The rotation angle of the fid. point is 20.542340 plMakePlateFromTile : beginning loop over 1150 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0927.par makePlates : plateInfo struct for plate 1299 : (h4).mjd 52997 (h4).raCen 133.9067 (h4).decCen 7.797545 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.907 7.798 133.907 9.298 plMakePlateFromTile : mjd of obs : 52997.784034 Observed HA/dec of plate center, fiducial point (deg) : -13.002 7.792 -13.003 9.291 The rotation angle of the fid. point is 23.993829 plMakePlateFromTile : beginning loop over 1268 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-89.51, 135.86, 7.7) and (-89.08, 135.42, 8.3) checkLTHo : distance = 0.619, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-89.08, 135.42, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0928.par makePlates : plateInfo struct for plate 1300 : (h4).mjd 52997 (h4).raCen 136.3971 (h4).decCen 8.343178 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.397 8.343 136.397 9.843 plMakePlateFromTile : mjd of obs : 52997.782620 Observed HA/dec of plate center, fiducial point (deg) : -16.002 8.337 -16.003 9.836 The rotation angle of the fid. point is 28.995805 plMakePlateFromTile : beginning loop over 1222 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0929.par makePlates : plateInfo struct for plate 1301 : (h4).mjd 52997 (h4).raCen 138.732 (h4).decCen 8.764253 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 138.732 8.764 138.732 10.264 plMakePlateFromTile : mjd of obs : 52997.783545 Observed HA/dec of plate center, fiducial point (deg) : -18.002 8.757 -18.003 10.256 The rotation angle of the fid. point is 32.170562 plMakePlateFromTile : beginning loop over 1198 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0930.par makePlates : plateInfo struct for plate 1302 : (h4).mjd 52997 (h4).raCen 140.6153 (h4).decCen 8.875913 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.615 8.876 140.615 10.376 plMakePlateFromTile : mjd of obs : 52997.863578 Observed HA/dec of plate center, fiducial point (deg) : 8.998 8.868 8.997 10.367 The rotation angle of the fid. point is -17.892326 plMakePlateFromTile : beginning loop over 1278 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0931.par makePlates : plateInfo struct for plate 1303 : (h4).mjd 52997 (h4).raCen 142.9655 (h4).decCen 9.376121 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.965 9.376 142.965 10.876 plMakePlateFromTile : mjd of obs : 52997.864546 Observed HA/dec of plate center, fiducial point (deg) : 6.998 9.367 6.997 10.866 The rotation angle of the fid. point is -14.405176 plMakePlateFromTile : beginning loop over 1199 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0932.par makePlates : plateInfo struct for plate 1304 : (h4).mjd 52997 (h4).raCen 144.0483 (h4).decCen 9.418309 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.048 9.418 144.048 10.918 plMakePlateFromTile : mjd of obs : 52997.862004 Observed HA/dec of plate center, fiducial point (deg) : 4.998 9.409 4.997 10.908 The rotation angle of the fid. point is -10.433626 plMakePlateFromTile : beginning loop over 1229 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0933.par makePlates : plateInfo struct for plate 1305 : (h4).mjd 52997 (h4).raCen 146.4097 (h4).decCen 9.834209 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 146.410 9.834 146.410 11.334 plMakePlateFromTile : mjd of obs : 52997.863003 Observed HA/dec of plate center, fiducial point (deg) : 2.998 9.824 2.997 11.323 The rotation angle of the fid. point is -6.415088 plMakePlateFromTile : beginning loop over 1204 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0934.par makePlates : plateInfo struct for plate 1306 : (h4).mjd 52997 (h4).raCen 147.991 (h4).decCen 10.10433 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.991 10.104 147.991 11.604 plMakePlateFromTile : mjd of obs : 52997.864612 Observed HA/dec of plate center, fiducial point (deg) : 1.998 10.094 1.997 11.593 The rotation angle of the fid. point is -4.331306 plMakePlateFromTile : beginning loop over 1202 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0935.par makePlates : plateInfo struct for plate 1307 : (h4).mjd 52997 (h4).raCen 150.0908 (h4).decCen 10.30765 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.091 10.308 150.091 11.808 plMakePlateFromTile : mjd of obs : 52997.864886 Observed HA/dec of plate center, fiducial point (deg) : -0.002 10.296 -0.003 11.796 The rotation angle of the fid. point is 0.017814 plMakePlateFromTile : beginning loop over 1236 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk66/complete//plPlugMapT-0936.par makePlates : plateInfo struct for plate 1308 : (h4).mjd 52997 (h4).raCen 151.4707 (h4).decCen 10.55481 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.471 10.555 151.471 12.055 plMakePlateFromTile : mjd of obs : 52997.865937 Observed HA/dec of plate center, fiducial point (deg) : -1.002 10.543 -1.003 12.043 The rotation angle of the fid. point is 2.237814 plMakePlateFromTile : beginning loop over 1133 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Mar 3 18:04:18 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 14 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1295.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 156 to list of science objects plFiberPlate : adding sky number 28 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 79 to list of science objects plFiberPlate : adding sky number 19 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 43 2 0 4 3 3 5 4 15 30 5 7 23 6 0 1 7 3 13 8 23 50 9 8 28 10 18 49 11 12 37 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 42 106 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 50 152 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 44 69 plFiberPlate : adding spectro-photo std with objId = 3538 20 3 39 199 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 32 160 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 38 418 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 48 333 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 45 361 plFiberPlate : 40 possible sky positions to use as objects from a possible 159. plFiberPlate : 35 possible sky positions to use as objects from a possible 158. plFiberPlate : 30 possible sky positions to use as objects from a possible 157. plFiberPlate : 21 possible sky positions to use as objects from a possible 156. plFiberPlate : 12 possible sky positions to use as objects from a possible 155. plFiberPlate : 7 possible sky positions to use as objects from a possible 154. plFiberPlate : 28 possible sky positions to use as objects from a possible 153. plFiberPlate : 20 possible sky positions to use as objects from a possible 152. plFiberPlate : 18 possible sky positions to use as objects from a possible 151. plFiberPlate : 13 possible sky positions to use as objects from a possible 150. plFiberPlate : 7 possible sky positions to use as objects from a possible 149. plFiberPlate : 5 possible sky positions to use as objects from a possible 148. plFiberPlate : 6 possible sky positions to use as objects from a possible 147. plFiberPlate : 11 possible sky positions to use as objects from a possible 146. plFiberPlate : 10 possible sky positions to use as objects from a possible 145. plFiberPlate : 6 possible sky positions to use as objects from a possible 144. plFiberPlate : 8 possible sky positions to use as objects from a possible 143. plFiberPlate : 9 possible sky positions to use as objects from a possible 142. plFiberPlate : 6 possible sky positions to use as objects from a possible 141. plFiberPlate : 5 possible sky positions to use as objects from a possible 140. plFiberPlate : 1 possible sky positions to use as objects from a possible 139. plFiberPlate : 1 possible sky positions to use as objects from a possible 138. plFiberPlate : 5 possible sky positions to use as objects from a possible 137. plFiberPlate : 3 possible sky positions to use as objects from a possible 136. plFiberPlate : 9 possible sky positions to use as objects from a possible 135. plFiberPlate : 6 possible sky positions to use as objects from a possible 134. plFiberPlate : 1 possible sky positions to use as objects from a possible 133. plFiberPlate : 2 possible sky positions to use as objects from a possible 132. plFiberPlate : 5 possible sky positions to use as objects from a possible 131. plFiberPlate : 5 possible sky positions to use as objects from a possible 130. plFiberPlate : 4 possible sky positions to use as objects from a possible 129. plFiberPlate : 2 possible sky positions to use as objects from a possible 128. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1295.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1295.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1296.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 43 2 1 2 3 2 10 4 25 68 5 13 49 6 2 7 7 3 15 8 7 61 9 7 52 10 19 69 11 8 35 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 59 221 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 53 156 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 69 156 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 56 319 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 68 314 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 54 287 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 67 118 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 53 102 plFiberPlate : 75 possible sky positions to use as objects from a possible 254. plFiberPlate : 53 possible sky positions to use as objects from a possible 253. plFiberPlate : 42 possible sky positions to use as objects from a possible 252. plFiberPlate : 35 possible sky positions to use as objects from a possible 251. plFiberPlate : 8 possible sky positions to use as objects from a possible 250. plFiberPlate : 11 possible sky positions to use as objects from a possible 249. plFiberPlate : 30 possible sky positions to use as objects from a possible 248. plFiberPlate : 47 possible sky positions to use as objects from a possible 247. plFiberPlate : 32 possible sky positions to use as objects from a possible 246. plFiberPlate : 24 possible sky positions to use as objects from a possible 245. plFiberPlate : 15 possible sky positions to use as objects from a possible 244. plFiberPlate : 3 possible sky positions to use as objects from a possible 243. plFiberPlate : 7 possible sky positions to use as objects from a possible 242. plFiberPlate : 13 possible sky positions to use as objects from a possible 241. plFiberPlate : 9 possible sky positions to use as objects from a possible 240. plFiberPlate : 3 possible sky positions to use as objects from a possible 239. plFiberPlate : 34 possible sky positions to use as objects from a possible 238. plFiberPlate : 28 possible sky positions to use as objects from a possible 237. plFiberPlate : 9 possible sky positions to use as objects from a possible 236. plFiberPlate : 8 possible sky positions to use as objects from a possible 235. plFiberPlate : 6 possible sky positions to use as objects from a possible 234. plFiberPlate : 12 possible sky positions to use as objects from a possible 233. plFiberPlate : 7 possible sky positions to use as objects from a possible 232. plFiberPlate : 0 possible sky positions to use as objects from a possible 231. plFiberPlate: No sky found for bundle at 225.484 54.037, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 231. plFiberPlate: No sky found for bundle at 225.484 54.037, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 231. plFiberPlate: No sky found for bundle at 225.484 54.037, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 231. plFiberPlate: No sky found for bundle at 225.484 54.037, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 231. plFiberPlate : 3 possible sky positions to use as objects from a possible 230. plFiberPlate : 7 possible sky positions to use as objects from a possible 229. plFiberPlate : 7 possible sky positions to use as objects from a possible 228. plFiberPlate : 3 possible sky positions to use as objects from a possible 227. plFiberPlate : 2 possible sky positions to use as objects from a possible 226. plFiberPlate : 3 possible sky positions to use as objects from a possible 225. plFiberPlate : 2 possible sky positions to use as objects from a possible 224. plFiberPlate : 11 possible sky positions to use as objects from a possible 223. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1295.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1296.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1296.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1297.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 129 2 21 97 3 18 84 4 18 91 5 3 53 6 0 10 7 0 26 8 9 83 9 5 54 10 38 134 11 22 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 55 38 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 54 94 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 76 124 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 77 202 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 86 377 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 79 62 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 73 24 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 74 125 plFiberPlate : 112 possible sky positions to use as objects from a possible 442. plFiberPlate : 61 possible sky positions to use as objects from a possible 441. plFiberPlate : 47 possible sky positions to use as objects from a possible 440. plFiberPlate : 35 possible sky positions to use as objects from a possible 439. plFiberPlate : 37 possible sky positions to use as objects from a possible 438. plFiberPlate : 31 possible sky positions to use as objects from a possible 437. plFiberPlate : 65 possible sky positions to use as objects from a possible 436. plFiberPlate : 48 possible sky positions to use as objects from a possible 435. plFiberPlate : 35 possible sky positions to use as objects from a possible 434. plFiberPlate : 26 possible sky positions to use as objects from a possible 433. plFiberPlate : 14 possible sky positions to use as objects from a possible 432. plFiberPlate : 5 possible sky positions to use as objects from a possible 431. plFiberPlate : 8 possible sky positions to use as objects from a possible 430. plFiberPlate : 18 possible sky positions to use as objects from a possible 429. plFiberPlate : 12 possible sky positions to use as objects from a possible 428. plFiberPlate : 27 possible sky positions to use as objects from a possible 427. plFiberPlate : 48 possible sky positions to use as objects from a possible 426. plFiberPlate : 43 possible sky positions to use as objects from a possible 425. plFiberPlate : 25 possible sky positions to use as objects from a possible 424. plFiberPlate : 17 possible sky positions to use as objects from a possible 423. plFiberPlate : 6 possible sky positions to use as objects from a possible 422. plFiberPlate : 11 possible sky positions to use as objects from a possible 421. plFiberPlate : 5 possible sky positions to use as objects from a possible 420. plFiberPlate : 16 possible sky positions to use as objects from a possible 419. plFiberPlate : 22 possible sky positions to use as objects from a possible 418. plFiberPlate : 12 possible sky positions to use as objects from a possible 417. plFiberPlate : 12 possible sky positions to use as objects from a possible 416. plFiberPlate : 13 possible sky positions to use as objects from a possible 415. plFiberPlate : 5 possible sky positions to use as objects from a possible 414. plFiberPlate : 11 possible sky positions to use as objects from a possible 413. plFiberPlate : 12 possible sky positions to use as objects from a possible 412. plFiberPlate : 4 possible sky positions to use as objects from a possible 411. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1296.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1297.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1297.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1298.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 93 2 14 83 3 20 93 4 16 88 5 2 57 6 0 11 7 1 16 8 3 72 9 5 52 10 35 149 11 22 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 94 8 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 82 18 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 87 11 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 99 100 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 87 115 plFiberPlate : adding spectro-photo std with objId = 3538 20 3 93 163 plFiberPlate : adding spectro-photo std with objId = 3538 20 3 80 175 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 89 198 plFiberPlate : 109 possible sky positions to use as objects from a possible 409. plFiberPlate : 95 possible sky positions to use as objects from a possible 408. plFiberPlate : 63 possible sky positions to use as objects from a possible 407. plFiberPlate : 50 possible sky positions to use as objects from a possible 406. plFiberPlate : 34 possible sky positions to use as objects from a possible 405. plFiberPlate : 32 possible sky positions to use as objects from a possible 404. plFiberPlate : 31 possible sky positions to use as objects from a possible 403. plFiberPlate : 62 possible sky positions to use as objects from a possible 402. plFiberPlate : 56 possible sky positions to use as objects from a possible 401. plFiberPlate : 48 possible sky positions to use as objects from a possible 400. plFiberPlate : 35 possible sky positions to use as objects from a possible 399. plFiberPlate : 22 possible sky positions to use as objects from a possible 398. plFiberPlate : 18 possible sky positions to use as objects from a possible 397. plFiberPlate : 17 possible sky positions to use as objects from a possible 396. plFiberPlate : 11 possible sky positions to use as objects from a possible 395. plFiberPlate : 9 possible sky positions to use as objects from a possible 394. plFiberPlate : 45 possible sky positions to use as objects from a possible 393. plFiberPlate : 33 possible sky positions to use as objects from a possible 392. plFiberPlate : 29 possible sky positions to use as objects from a possible 391. plFiberPlate : 20 possible sky positions to use as objects from a possible 390. plFiberPlate : 10 possible sky positions to use as objects from a possible 389. plFiberPlate : 10 possible sky positions to use as objects from a possible 388. plFiberPlate : 6 possible sky positions to use as objects from a possible 387. plFiberPlate : 13 possible sky positions to use as objects from a possible 386. plFiberPlate : 11 possible sky positions to use as objects from a possible 385. plFiberPlate : 26 possible sky positions to use as objects from a possible 384. plFiberPlate : 15 possible sky positions to use as objects from a possible 383. plFiberPlate : 6 possible sky positions to use as objects from a possible 382. plFiberPlate : 8 possible sky positions to use as objects from a possible 381. plFiberPlate : 5 possible sky positions to use as objects from a possible 380. plFiberPlate : 14 possible sky positions to use as objects from a possible 379. plFiberPlate : 11 possible sky positions to use as objects from a possible 378. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1297.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1298.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1298.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1299.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 123 2 21 114 3 18 113 4 19 118 5 12 83 6 2 28 7 2 56 8 8 96 9 4 80 10 25 163 11 17 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 115 144 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 98 91 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 125 51 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 121 103 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 108 106 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 97 56 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 112 111 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 107 186 plFiberPlate : 86 possible sky positions to use as objects from a possible 521. plFiberPlate : 100 possible sky positions to use as objects from a possible 520. plFiberPlate : 82 possible sky positions to use as objects from a possible 519. plFiberPlate : 39 possible sky positions to use as objects from a possible 518. plFiberPlate : 34 possible sky positions to use as objects from a possible 517. plFiberPlate : 42 possible sky positions to use as objects from a possible 516. plFiberPlate : 25 possible sky positions to use as objects from a possible 515. plFiberPlate : 39 possible sky positions to use as objects from a possible 514. plFiberPlate : 27 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : 9 possible sky positions to use as objects from a possible 511. plFiberPlate : 14 possible sky positions to use as objects from a possible 510. plFiberPlate : 3 possible sky positions to use as objects from a possible 509. plFiberPlate : 1 possible sky positions to use as objects from a possible 508. plFiberPlate : 3 possible sky positions to use as objects from a possible 507. plFiberPlate : 10 possible sky positions to use as objects from a possible 506. plFiberPlate : 39 possible sky positions to use as objects from a possible 505. plFiberPlate : 28 possible sky positions to use as objects from a possible 504. plFiberPlate : 17 possible sky positions to use as objects from a possible 503. plFiberPlate : 6 possible sky positions to use as objects from a possible 502. plFiberPlate : 7 possible sky positions to use as objects from a possible 501. plFiberPlate : 11 possible sky positions to use as objects from a possible 500. plFiberPlate : 2 possible sky positions to use as objects from a possible 499. plFiberPlate : 5 possible sky positions to use as objects from a possible 498. plFiberPlate : 20 possible sky positions to use as objects from a possible 497. plFiberPlate : 17 possible sky positions to use as objects from a possible 496. plFiberPlate : 17 possible sky positions to use as objects from a possible 495. plFiberPlate : 8 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 17 possible sky positions to use as objects from a possible 492. plFiberPlate : 10 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1298.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1299.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1299.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1300.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 117 2 11 116 3 13 99 4 18 106 5 6 72 6 1 23 7 1 45 8 5 95 9 4 80 10 30 165 11 15 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3478 20 5 139 129 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 122 58 plFiberPlate : adding spectro-photo std with objId = 3478 20 5 139 80 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 130 59 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 132 94 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 123 155 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 122 17 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 133 40 plFiberPlate : 89 possible sky positions to use as objects from a possible 504. plFiberPlate : 73 possible sky positions to use as objects from a possible 503. plFiberPlate : 47 possible sky positions to use as objects from a possible 502. plFiberPlate : 51 possible sky positions to use as objects from a possible 501. plFiberPlate : 33 possible sky positions to use as objects from a possible 500. plFiberPlate : 38 possible sky positions to use as objects from a possible 499. plFiberPlate : 38 possible sky positions to use as objects from a possible 498. plFiberPlate : 62 possible sky positions to use as objects from a possible 497. plFiberPlate : 37 possible sky positions to use as objects from a possible 496. plFiberPlate : 27 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 5 possible sky positions to use as objects from a possible 491. plFiberPlate : 12 possible sky positions to use as objects from a possible 490. plFiberPlate : 18 possible sky positions to use as objects from a possible 489. plFiberPlate : 48 possible sky positions to use as objects from a possible 488. plFiberPlate : 36 possible sky positions to use as objects from a possible 487. plFiberPlate : 27 possible sky positions to use as objects from a possible 486. plFiberPlate : 22 possible sky positions to use as objects from a possible 485. plFiberPlate : 15 possible sky positions to use as objects from a possible 484. plFiberPlate : 15 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 9 possible sky positions to use as objects from a possible 481. plFiberPlate : 26 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 17 possible sky positions to use as objects from a possible 478. plFiberPlate : 12 possible sky positions to use as objects from a possible 477. plFiberPlate : 7 possible sky positions to use as objects from a possible 476. plFiberPlate : 9 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 17 possible sky positions to use as objects from a possible 473. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1299.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1300.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1300.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1301.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 117 2 10 96 3 12 94 4 10 110 5 5 78 6 3 24 7 1 41 8 8 96 9 3 72 10 14 150 11 17 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 150 123 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 158 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 1 151 19 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 140 36 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 143 150 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 144 103 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 149 102 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 151 20 plFiberPlate : 136 possible sky positions to use as objects from a possible 492. plFiberPlate : 77 possible sky positions to use as objects from a possible 491. plFiberPlate : 43 possible sky positions to use as objects from a possible 490. plFiberPlate : 39 possible sky positions to use as objects from a possible 489. plFiberPlate : 28 possible sky positions to use as objects from a possible 488. plFiberPlate : 24 possible sky positions to use as objects from a possible 487. plFiberPlate : 40 possible sky positions to use as objects from a possible 486. plFiberPlate : 77 possible sky positions to use as objects from a possible 485. plFiberPlate : 53 possible sky positions to use as objects from a possible 484. plFiberPlate : 42 possible sky positions to use as objects from a possible 483. plFiberPlate : 17 possible sky positions to use as objects from a possible 482. plFiberPlate : 10 possible sky positions to use as objects from a possible 481. plFiberPlate : 14 possible sky positions to use as objects from a possible 480. plFiberPlate : 7 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 11 possible sky positions to use as objects from a possible 477. plFiberPlate : 54 possible sky positions to use as objects from a possible 476. plFiberPlate : 38 possible sky positions to use as objects from a possible 475. plFiberPlate : 22 possible sky positions to use as objects from a possible 474. plFiberPlate : 7 possible sky positions to use as objects from a possible 473. plFiberPlate : 5 possible sky positions to use as objects from a possible 472. plFiberPlate : 6 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 10 possible sky positions to use as objects from a possible 469. plFiberPlate : 20 possible sky positions to use as objects from a possible 468. plFiberPlate : 31 possible sky positions to use as objects from a possible 467. plFiberPlate : 17 possible sky positions to use as objects from a possible 466. plFiberPlate : 10 possible sky positions to use as objects from a possible 465. plFiberPlate : 17 possible sky positions to use as objects from a possible 464. plFiberPlate : 14 possible sky positions to use as objects from a possible 463. plFiberPlate : 9 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1300.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1301.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1301.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1302.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 115 2 3 110 3 8 111 4 23 112 5 6 107 6 1 47 7 3 64 8 9 106 9 7 96 10 16 150 11 7 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 156 6 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 162 64 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 155 36 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 167 36 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 143 150 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 160 13 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 165 128 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 159 112 plFiberPlate : 128 possible sky positions to use as objects from a possible 550. plFiberPlate : 71 possible sky positions to use as objects from a possible 549. plFiberPlate : 17 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 41 possible sky positions to use as objects from a possible 546. plFiberPlate : 28 possible sky positions to use as objects from a possible 545. plFiberPlate : 29 possible sky positions to use as objects from a possible 544. plFiberPlate : 59 possible sky positions to use as objects from a possible 543. plFiberPlate : 19 possible sky positions to use as objects from a possible 542. plFiberPlate : 4 possible sky positions to use as objects from a possible 541. plFiberPlate : 8 possible sky positions to use as objects from a possible 540. plFiberPlate : 1 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 15 possible sky positions to use as objects from a possible 537. plFiberPlate : 8 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 65 possible sky positions to use as objects from a possible 534. plFiberPlate : 47 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 5 possible sky positions to use as objects from a possible 530. plFiberPlate : 9 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 11 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 56 possible sky positions to use as objects from a possible 525. plFiberPlate : 27 possible sky positions to use as objects from a possible 524. plFiberPlate : 11 possible sky positions to use as objects from a possible 523. plFiberPlate : 18 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 12 possible sky positions to use as objects from a possible 520. plFiberPlate : 25 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1301.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1302.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1302.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1303.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 114 2 13 104 3 13 94 4 17 100 5 2 85 6 0 31 7 2 45 8 10 80 9 3 75 10 15 155 11 17 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3478 20 5 185 66 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 173 58 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 168 115 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 180 14 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 168 48 plFiberPlate : adding spectro-photo std with objId = 3538 20 6 172 12 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 178 82 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 185 30 plFiberPlate : 110 possible sky positions to use as objects from a possible 478. plFiberPlate : 87 possible sky positions to use as objects from a possible 477. plFiberPlate : 40 possible sky positions to use as objects from a possible 476. plFiberPlate : 32 possible sky positions to use as objects from a possible 475. plFiberPlate : 31 possible sky positions to use as objects from a possible 474. plFiberPlate : 41 possible sky positions to use as objects from a possible 473. plFiberPlate : 54 possible sky positions to use as objects from a possible 472. plFiberPlate : 69 possible sky positions to use as objects from a possible 471. plFiberPlate : 43 possible sky positions to use as objects from a possible 470. plFiberPlate : 32 possible sky positions to use as objects from a possible 469. plFiberPlate : 18 possible sky positions to use as objects from a possible 468. plFiberPlate : 5 possible sky positions to use as objects from a possible 467. plFiberPlate : 17 possible sky positions to use as objects from a possible 466. plFiberPlate : 8 possible sky positions to use as objects from a possible 465. plFiberPlate : 7 possible sky positions to use as objects from a possible 464. plFiberPlate : 13 possible sky positions to use as objects from a possible 463. plFiberPlate : 42 possible sky positions to use as objects from a possible 462. plFiberPlate : 28 possible sky positions to use as objects from a possible 461. plFiberPlate : 20 possible sky positions to use as objects from a possible 460. plFiberPlate : 1 possible sky positions to use as objects from a possible 459. plFiberPlate : 1 possible sky positions to use as objects from a possible 458. plFiberPlate : 13 possible sky positions to use as objects from a possible 457. plFiberPlate : 6 possible sky positions to use as objects from a possible 456. plFiberPlate : 2 possible sky positions to use as objects from a possible 455. plFiberPlate : 12 possible sky positions to use as objects from a possible 454. plFiberPlate : 28 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 9 possible sky positions to use as objects from a possible 451. plFiberPlate : 14 possible sky positions to use as objects from a possible 450. plFiberPlate : 11 possible sky positions to use as objects from a possible 449. plFiberPlate : 10 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1302.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1303.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1303.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1304.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 104 2 9 108 3 10 104 4 16 103 5 7 97 6 4 43 7 8 43 8 22 75 9 14 80 10 22 149 11 15 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 27 101 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 170 63 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 182 61 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 180 14 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 192 19 plFiberPlate : adding spectro-photo std with objId = 3538 20 6 172 12 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 178 82 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 185 30 plFiberPlate : 111 possible sky positions to use as objects from a possible 491. plFiberPlate : 112 possible sky positions to use as objects from a possible 490. plFiberPlate : 68 possible sky positions to use as objects from a possible 489. plFiberPlate : 61 possible sky positions to use as objects from a possible 488. plFiberPlate : 18 possible sky positions to use as objects from a possible 487. plFiberPlate : 24 possible sky positions to use as objects from a possible 486. plFiberPlate : 23 possible sky positions to use as objects from a possible 485. plFiberPlate : 64 possible sky positions to use as objects from a possible 484. plFiberPlate : 42 possible sky positions to use as objects from a possible 483. plFiberPlate : 29 possible sky positions to use as objects from a possible 482. plFiberPlate : 4 possible sky positions to use as objects from a possible 481. plFiberPlate : 11 possible sky positions to use as objects from a possible 480. plFiberPlate : 6 possible sky positions to use as objects from a possible 479. plFiberPlate : 7 possible sky positions to use as objects from a possible 478. plFiberPlate : 8 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : 60 possible sky positions to use as objects from a possible 475. plFiberPlate : 43 possible sky positions to use as objects from a possible 474. plFiberPlate : 33 possible sky positions to use as objects from a possible 473. plFiberPlate : 11 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 3 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 27 possible sky positions to use as objects from a possible 466. plFiberPlate : 13 possible sky positions to use as objects from a possible 465. plFiberPlate : 4 possible sky positions to use as objects from a possible 464. plFiberPlate : 3 possible sky positions to use as objects from a possible 463. plFiberPlate : 4 possible sky positions to use as objects from a possible 462. plFiberPlate : 6 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1303.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1304.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1304.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1305.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 120 2 7 89 3 4 86 4 21 80 5 13 89 6 6 46 7 4 55 8 7 89 9 7 94 10 15 122 11 6 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 1 201 45 plFiberPlate : adding spectro-photo std with objId = 3538 20 3 192 40 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 206 130 plFiberPlate : adding spectro-photo std with objId = 3538 20 6 197 61 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 193 45 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 199 8 plFiberPlate : adding spectro-photo std with objId = 3630 20 1 204 141 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 200 35 plFiberPlate : 72 possible sky positions to use as objects from a possible 480. plFiberPlate : 49 possible sky positions to use as objects from a possible 479. plFiberPlate : 43 possible sky positions to use as objects from a possible 478. plFiberPlate : 30 possible sky positions to use as objects from a possible 477. plFiberPlate : 23 possible sky positions to use as objects from a possible 476. plFiberPlate : 37 possible sky positions to use as objects from a possible 475. plFiberPlate : 45 possible sky positions to use as objects from a possible 474. plFiberPlate : 60 possible sky positions to use as objects from a possible 473. plFiberPlate : 42 possible sky positions to use as objects from a possible 472. plFiberPlate : 24 possible sky positions to use as objects from a possible 471. plFiberPlate : 16 possible sky positions to use as objects from a possible 470. plFiberPlate : 7 possible sky positions to use as objects from a possible 469. plFiberPlate : 8 possible sky positions to use as objects from a possible 468. plFiberPlate : 17 possible sky positions to use as objects from a possible 467. plFiberPlate : 17 possible sky positions to use as objects from a possible 466. plFiberPlate : 28 possible sky positions to use as objects from a possible 465. plFiberPlate : 56 possible sky positions to use as objects from a possible 464. plFiberPlate : 26 possible sky positions to use as objects from a possible 463. plFiberPlate : 14 possible sky positions to use as objects from a possible 462. plFiberPlate : 10 possible sky positions to use as objects from a possible 461. plFiberPlate : 5 possible sky positions to use as objects from a possible 460. plFiberPlate : 14 possible sky positions to use as objects from a possible 459. plFiberPlate : 13 possible sky positions to use as objects from a possible 458. plFiberPlate : 18 possible sky positions to use as objects from a possible 457. plFiberPlate : 7 possible sky positions to use as objects from a possible 456. plFiberPlate : 39 possible sky positions to use as objects from a possible 455. plFiberPlate : 31 possible sky positions to use as objects from a possible 454. plFiberPlate : 21 possible sky positions to use as objects from a possible 453. plFiberPlate : 24 possible sky positions to use as objects from a possible 452. plFiberPlate : 11 possible sky positions to use as objects from a possible 451. plFiberPlate : 7 possible sky positions to use as objects from a possible 450. plFiberPlate : 12 possible sky positions to use as objects from a possible 449. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1304.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1305.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1305.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1306.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 117 2 9 102 3 7 85 4 6 113 5 6 85 6 6 27 7 3 60 8 5 106 9 5 70 10 14 142 11 12 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 198 32 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 206 130 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 220 92 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 193 45 plFiberPlate : adding spectro-photo std with objId = 3538 20 6 197 61 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 216 42 plFiberPlate : adding spectro-photo std with objId = 3630 20 1 204 141 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 200 35 plFiberPlate : 126 possible sky positions to use as objects from a possible 509. plFiberPlate : 95 possible sky positions to use as objects from a possible 508. plFiberPlate : 48 possible sky positions to use as objects from a possible 507. plFiberPlate : 23 possible sky positions to use as objects from a possible 506. plFiberPlate : 17 possible sky positions to use as objects from a possible 505. plFiberPlate : 26 possible sky positions to use as objects from a possible 504. plFiberPlate : 57 possible sky positions to use as objects from a possible 503. plFiberPlate : 88 possible sky positions to use as objects from a possible 502. plFiberPlate : 67 possible sky positions to use as objects from a possible 501. plFiberPlate : 41 possible sky positions to use as objects from a possible 500. plFiberPlate : 14 possible sky positions to use as objects from a possible 499. plFiberPlate : 1 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 17 possible sky positions to use as objects from a possible 495. plFiberPlate : 17 possible sky positions to use as objects from a possible 494. plFiberPlate : 60 possible sky positions to use as objects from a possible 493. plFiberPlate : 33 possible sky positions to use as objects from a possible 492. plFiberPlate : 13 possible sky positions to use as objects from a possible 491. plFiberPlate : 3 possible sky positions to use as objects from a possible 490. plFiberPlate : 6 possible sky positions to use as objects from a possible 489. plFiberPlate : 4 possible sky positions to use as objects from a possible 488. plFiberPlate : 5 possible sky positions to use as objects from a possible 487. plFiberPlate : 14 possible sky positions to use as objects from a possible 486. plFiberPlate : 17 possible sky positions to use as objects from a possible 485. plFiberPlate : 13 possible sky positions to use as objects from a possible 484. plFiberPlate : 9 possible sky positions to use as objects from a possible 483. plFiberPlate : 3 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 15 possible sky positions to use as objects from a possible 479. plFiberPlate : 22 possible sky positions to use as objects from a possible 478. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1305.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1306.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1306.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1307.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 125 2 9 103 3 10 87 4 11 115 5 5 107 6 4 51 7 6 57 8 9 93 9 9 96 10 22 147 11 16 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 205 29 plFiberPlate : adding spectro-photo std with objId = 3538 20 3 223 28 plFiberPlate : adding spectro-photo std with objId = 3630 20 2 216 42 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 220 92 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 222 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 229 92 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 219 60 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 218 12 plFiberPlate : 126 possible sky positions to use as objects from a possible 534. plFiberPlate : 62 possible sky positions to use as objects from a possible 533. plFiberPlate : 39 possible sky positions to use as objects from a possible 532. plFiberPlate : 32 possible sky positions to use as objects from a possible 531. plFiberPlate : 21 possible sky positions to use as objects from a possible 530. plFiberPlate : 55 possible sky positions to use as objects from a possible 529. plFiberPlate : 59 possible sky positions to use as objects from a possible 528. plFiberPlate : 63 possible sky positions to use as objects from a possible 527. plFiberPlate : 50 possible sky positions to use as objects from a possible 526. plFiberPlate : 25 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 23 possible sky positions to use as objects from a possible 522. plFiberPlate : 11 possible sky positions to use as objects from a possible 521. plFiberPlate : 13 possible sky positions to use as objects from a possible 520. plFiberPlate : 13 possible sky positions to use as objects from a possible 519. plFiberPlate : 62 possible sky positions to use as objects from a possible 518. plFiberPlate : 30 possible sky positions to use as objects from a possible 517. plFiberPlate : 20 possible sky positions to use as objects from a possible 516. plFiberPlate : 6 possible sky positions to use as objects from a possible 515. plFiberPlate : 10 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : 4 possible sky positions to use as objects from a possible 512. plFiberPlate : 9 possible sky positions to use as objects from a possible 511. plFiberPlate : 12 possible sky positions to use as objects from a possible 510. plFiberPlate : 34 possible sky positions to use as objects from a possible 509. plFiberPlate : 22 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 12 possible sky positions to use as objects from a possible 506. plFiberPlate : 4 possible sky positions to use as objects from a possible 505. plFiberPlate : 16 possible sky positions to use as objects from a possible 504. plFiberPlate : 14 possible sky positions to use as objects from a possible 503. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1306.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1307.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1307.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.2/plPlugMapP-1308.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 75 2 9 87 3 10 100 4 13 110 5 8 102 6 1 41 7 0 34 8 4 47 9 4 75 10 17 147 11 15 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 1 232 40 plFiberPlate : adding spectro-photo std with objId = 3630 20 5 239 72 plFiberPlate : adding spectro-photo std with objId = 3538 20 6 230 49 plFiberPlate : adding spectro-photo std with objId = 3538 20 2 222 15 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 222 4 plFiberPlate : adding spectro-photo std with objId = 3630 20 3 229 92 plFiberPlate : adding spectro-photo std with objId = 3538 20 4 219 60 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 218 12 plFiberPlate : 117 possible sky positions to use as objects from a possible 439. plFiberPlate : 82 possible sky positions to use as objects from a possible 438. plFiberPlate : 29 possible sky positions to use as objects from a possible 437. plFiberPlate : 20 possible sky positions to use as objects from a possible 436. plFiberPlate : 18 possible sky positions to use as objects from a possible 435. plFiberPlate : 26 possible sky positions to use as objects from a possible 434. plFiberPlate : 23 possible sky positions to use as objects from a possible 433. plFiberPlate : 79 possible sky positions to use as objects from a possible 432. plFiberPlate : 78 possible sky positions to use as objects from a possible 431. plFiberPlate : 55 possible sky positions to use as objects from a possible 430. plFiberPlate : 40 possible sky positions to use as objects from a possible 429. plFiberPlate : 18 possible sky positions to use as objects from a possible 428. plFiberPlate : 10 possible sky positions to use as objects from a possible 427. plFiberPlate : 19 possible sky positions to use as objects from a possible 426. plFiberPlate : 12 possible sky positions to use as objects from a possible 425. plFiberPlate : 18 possible sky positions to use as objects from a possible 424. plFiberPlate : 58 possible sky positions to use as objects from a possible 423. plFiberPlate : 39 possible sky positions to use as objects from a possible 422. plFiberPlate : 35 possible sky positions to use as objects from a possible 421. plFiberPlate : 10 possible sky positions to use as objects from a possible 420. plFiberPlate : 3 possible sky positions to use as objects from a possible 419. plFiberPlate : 6 possible sky positions to use as objects from a possible 418. plFiberPlate : 5 possible sky positions to use as objects from a possible 417. plFiberPlate : 9 possible sky positions to use as objects from a possible 416. plFiberPlate : 3 possible sky positions to use as objects from a possible 415. plFiberPlate : 21 possible sky positions to use as objects from a possible 414. plFiberPlate : 9 possible sky positions to use as objects from a possible 413. plFiberPlate : 2 possible sky positions to use as objects from a possible 412. plFiberPlate : 4 possible sky positions to use as objects from a possible 411. plFiberPlate : 6 possible sky positions to use as objects from a possible 410. plFiberPlate : 5 possible sky positions to use as objects from a possible 409. plFiberPlate : 5 possible sky positions to use as objects from a possible 408. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1307.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1308.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.2/plOverlay-1308.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Mar 3 18:05:01 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 14 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1295.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1295.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1295.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1296.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1296.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.6360,6.8875) and (12.55,2.43) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1296.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1297.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1297.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1297.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1298.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.1637,-9.8583) and (-6.87,-10.67) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1298.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1298.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1299.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1299.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1299.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1300.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.4299,-10.6197) and (0.10,-12.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1300.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1300.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1301.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1301.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1301.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1302.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.9356,-10.4417) and (3.81,-11.77) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1302.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1302.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1303.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1303.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1303.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1304.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1208,6.2814) and (11.41,4.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1304.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1304.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1305.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1305.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1305.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1306.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.6464,1.8542) and (-12.75,1.13) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1306.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1306.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1307.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.8666,7.9817) and (10.68,6.96) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1307.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1307.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1308.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1308.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.2/plFanuc-1308.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Mar 3 18:05:48 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e964e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 14 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1295 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1296 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1297 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1298 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1299 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1300 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1301 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1302 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1303 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1304 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1305 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1306 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1307 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1308 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Mar 3 18:06:11 CST 2003 Begin running plateEnder dr2003.03.2 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.03.2 -morePipes 1 failed. PS: Read file for stderr output of this job.