Sender: LSF System Subject: Job 69074: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Jul 2 13:35:59 2003 Results reported at Wed Jul 2 13:37:13 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_343 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.07.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 59.39 sec. Max Memory : 9 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Jul 2 13:36:04 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Jul 2 13:36:07 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v2_2/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_11_5OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_7/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_4_24/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_343/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_17/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_16/OSF1/bin:/sdss/ups/prd/sdssmath/v5_12/OSF1/bin:/sdss/ups/prd/astrotools/v5_14/OSF1/bin:/sdss/ups/prd/plate/v3_8/OSF1/bin --------------------------------------------------------------- Wed Jul 2 13:36:07 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_11_5OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_343/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_16/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_24/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_8/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Wed Jul 2 13:36:07 CDT 2003 Begin running plate --------------------------------------------------------------- Wed Jul 2 13:36:07 CDT 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140ec1be8 makePlates : beginning loop over plObs chain; makePlates : making 4 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0592.par makePlates : plateInfo struct for plate 1410 : (h4).mjd 52880 (h4).raCen 254.6167 (h4).decCen 33.80069 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.617 33.801 254.617 35.301 plMakePlateFromTile : mjd of obs : 52880.559709 Observed HA/dec of plate center, fiducial point (deg) : 29.998 33.799 29.998 35.299 The rotation angle of the fid. point is -83.925194 plMakePlateFromTile : beginning loop over 1047 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0593.par makePlates : plateInfo struct for plate 1411 : (h4).mjd 52880 (h4).raCen 256.1911 (h4).decCen 31.87106 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 256.191 31.871 256.191 33.371 plMakePlateFromTile : mjd of obs : 52880.558530 Observed HA/dec of plate center, fiducial point (deg) : 27.998 31.871 27.998 33.370 The rotation angle of the fid. point is -80.266294 plMakePlateFromTile : beginning loop over 962 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0594.par makePlates : plateInfo struct for plate 1412 : (h4).mjd 52880 (h4).raCen 257.8916 (h4).decCen 29.53414 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 257.892 29.534 257.892 31.034 plMakePlateFromTile : mjd of obs : 52880.560472 Observed HA/dec of plate center, fiducial point (deg) : 26.998 29.535 26.998 31.034 The rotation angle of the fid. point is -75.086307 plMakePlateFromTile : beginning loop over 935 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0595.par makePlates : plateInfo struct for plate 1413 : (h4).mjd 52880 (h4).raCen 259.5826 (h4).decCen 27.21642 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 259.583 27.216 259.583 28.716 plMakePlateFromTile : mjd of obs : 52880.559617 Observed HA/dec of plate center, fiducial point (deg) : 24.998 27.218 24.998 28.718 The rotation angle of the fid. point is -69.502421 plMakePlateFromTile : beginning loop over 873 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Jul 2 13:36:19 CDT 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 4 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.1/plPlugMapP-1410.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 69 2 13 64 3 5 24 4 5 32 5 27 92 6 28 78 7 6 28 8 2 18 9 25 72 10 21 99 11 16 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 111 102 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 96 39 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 109 142 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 112 56 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 103 81 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 105 82 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 108 26 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 111 65 plFiberPlate : 24 possible sky positions to use as objects from a possible 311. plFiberPlate : 11 possible sky positions to use as objects from a possible 310. plFiberPlate : 8 possible sky positions to use as objects from a possible 309. plFiberPlate : 11 possible sky positions to use as objects from a possible 308. plFiberPlate : 13 possible sky positions to use as objects from a possible 307. plFiberPlate : 24 possible sky positions to use as objects from a possible 306. plFiberPlate : 17 possible sky positions to use as objects from a possible 305. plFiberPlate : 36 possible sky positions to use as objects from a possible 304. plFiberPlate : 9 possible sky positions to use as objects from a possible 303. plFiberPlate : 19 possible sky positions to use as objects from a possible 302. plFiberPlate : 7 possible sky positions to use as objects from a possible 301. plFiberPlate : 5 possible sky positions to use as objects from a possible 300. plFiberPlate : 7 possible sky positions to use as objects from a possible 299. plFiberPlate : 0 possible sky positions to use as objects from a possible 298. plFiberPlate: No sky found for bundle at 178.808 -93.172, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 298. plFiberPlate : 0 possible sky positions to use as objects from a possible 297. plFiberPlate: No sky found for bundle at 194.409 -72.466, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 297. plFiberPlate: No sky found for bundle at 194.409 -72.466, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 297. plFiberPlate: No sky found for bundle at 194.409 -72.466, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 297. plFiberPlate : 8 possible sky positions to use as objects from a possible 296. plFiberPlate : 42 possible sky positions to use as objects from a possible 295. plFiberPlate : 31 possible sky positions to use as objects from a possible 294. plFiberPlate : 18 possible sky positions to use as objects from a possible 293. plFiberPlate : 16 possible sky positions to use as objects from a possible 292. plFiberPlate : 6 possible sky positions to use as objects from a possible 291. plFiberPlate : 8 possible sky positions to use as objects from a possible 290. plFiberPlate : 6 possible sky positions to use as objects from a possible 289. plFiberPlate : 3 possible sky positions to use as objects from a possible 288. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.267 -18.747, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.267 -18.747, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.267 -18.747, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.267 -18.747, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 287. plFiberPlate : 48 possible sky positions to use as objects from a possible 286. plFiberPlate : 33 possible sky positions to use as objects from a possible 285. plFiberPlate : 37 possible sky positions to use as objects from a possible 284. plFiberPlate : 20 possible sky positions to use as objects from a possible 283. plFiberPlate : 14 possible sky positions to use as objects from a possible 282. plFiberPlate : 12 possible sky positions to use as objects from a possible 281. plFiberPlate : 5 possible sky positions to use as objects from a possible 280. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1410.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1410.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.1/plPlugMapP-1411.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 66 2 15 61 3 5 11 4 2 15 5 18 77 6 16 63 7 6 20 8 0 18 9 15 70 10 19 69 11 17 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 8 at 227.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 113 148 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 126 48 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 114 145 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 117 160 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 127 50 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 130 41 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 122 32 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 116 39 plFiberPlate : 18 possible sky positions to use as objects from a possible 257. plFiberPlate : 6 possible sky positions to use as objects from a possible 256. plFiberPlate : 12 possible sky positions to use as objects from a possible 255. plFiberPlate : 16 possible sky positions to use as objects from a possible 254. plFiberPlate : 14 possible sky positions to use as objects from a possible 253. plFiberPlate : 11 possible sky positions to use as objects from a possible 252. plFiberPlate : 23 possible sky positions to use as objects from a possible 251. plFiberPlate : 20 possible sky positions to use as objects from a possible 250. plFiberPlate : 13 possible sky positions to use as objects from a possible 249. plFiberPlate : 8 possible sky positions to use as objects from a possible 248. plFiberPlate : 10 possible sky positions to use as objects from a possible 247. plFiberPlate : 1 possible sky positions to use as objects from a possible 246. plFiberPlate : 4 possible sky positions to use as objects from a possible 245. plFiberPlate : 3 possible sky positions to use as objects from a possible 244. plFiberPlate : 7 possible sky positions to use as objects from a possible 243. plFiberPlate : 4 possible sky positions to use as objects from a possible 242. plFiberPlate : 39 possible sky positions to use as objects from a possible 241. plFiberPlate : 49 possible sky positions to use as objects from a possible 240. plFiberPlate : 39 possible sky positions to use as objects from a possible 239. plFiberPlate : 29 possible sky positions to use as objects from a possible 238. plFiberPlate : 15 possible sky positions to use as objects from a possible 237. plFiberPlate : 5 possible sky positions to use as objects from a possible 236. plFiberPlate : 13 possible sky positions to use as objects from a possible 235. plFiberPlate : 5 possible sky positions to use as objects from a possible 234. plFiberPlate : 18 possible sky positions to use as objects from a possible 233. plFiberPlate : 19 possible sky positions to use as objects from a possible 232. plFiberPlate : 28 possible sky positions to use as objects from a possible 231. plFiberPlate : 31 possible sky positions to use as objects from a possible 230. plFiberPlate : 27 possible sky positions to use as objects from a possible 229. plFiberPlate : 14 possible sky positions to use as objects from a possible 228. plFiberPlate : 11 possible sky positions to use as objects from a possible 227. plFiberPlate : 10 possible sky positions to use as objects from a possible 226. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1410.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1411.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1411.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.1/plPlugMapP-1412.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 61 2 22 57 3 4 20 4 0 9 5 12 49 6 13 55 7 3 12 8 2 7 9 14 53 10 13 80 11 17 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 4 at -227.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 149 88 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 134 8 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 141 78 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 146 129 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 148 55 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 138 112 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 130 41 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 136 72 plFiberPlate : 28 possible sky positions to use as objects from a possible 212. plFiberPlate : 6 possible sky positions to use as objects from a possible 211. plFiberPlate : 6 possible sky positions to use as objects from a possible 210. plFiberPlate : 7 possible sky positions to use as objects from a possible 209. plFiberPlate : 17 possible sky positions to use as objects from a possible 208. plFiberPlate : 24 possible sky positions to use as objects from a possible 207. plFiberPlate : 5 possible sky positions to use as objects from a possible 206. plFiberPlate : 17 possible sky positions to use as objects from a possible 205. plFiberPlate : 14 possible sky positions to use as objects from a possible 204. plFiberPlate : 12 possible sky positions to use as objects from a possible 203. plFiberPlate : 4 possible sky positions to use as objects from a possible 202. plFiberPlate : 9 possible sky positions to use as objects from a possible 201. plFiberPlate : 6 possible sky positions to use as objects from a possible 200. plFiberPlate : 5 possible sky positions to use as objects from a possible 199. plFiberPlate : 3 possible sky positions to use as objects from a possible 198. plFiberPlate : 11 possible sky positions to use as objects from a possible 197. plFiberPlate : 24 possible sky positions to use as objects from a possible 196. plFiberPlate : 20 possible sky positions to use as objects from a possible 195. plFiberPlate : 20 possible sky positions to use as objects from a possible 194. plFiberPlate : 13 possible sky positions to use as objects from a possible 193. plFiberPlate : 9 possible sky positions to use as objects from a possible 192. plFiberPlate : 2 possible sky positions to use as objects from a possible 191. plFiberPlate : 10 possible sky positions to use as objects from a possible 190. plFiberPlate : 5 possible sky positions to use as objects from a possible 189. plFiberPlate : 1 possible sky positions to use as objects from a possible 188. plFiberPlate : 17 possible sky positions to use as objects from a possible 187. plFiberPlate : 26 possible sky positions to use as objects from a possible 186. plFiberPlate : 28 possible sky positions to use as objects from a possible 185. plFiberPlate : 28 possible sky positions to use as objects from a possible 184. plFiberPlate : 23 possible sky positions to use as objects from a possible 183. plFiberPlate : 19 possible sky positions to use as objects from a possible 182. plFiberPlate : 8 possible sky positions to use as objects from a possible 181. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1411.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1412.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1412.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.1/plPlugMapP-1413.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 32 2 11 35 3 7 9 4 6 9 5 18 50 6 13 39 7 1 14 8 0 4 9 11 40 10 23 49 11 11 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 8 at 227.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 151 170 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 156 142 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 160 60 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 164 85 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 152 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 152 170 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 164 124 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 167 27 plFiberPlate : 9 possible sky positions to use as objects from a possible 158. plFiberPlate : 4 possible sky positions to use as objects from a possible 157. plFiberPlate : 10 possible sky positions to use as objects from a possible 156. plFiberPlate : 7 possible sky positions to use as objects from a possible 155. plFiberPlate : 8 possible sky positions to use as objects from a possible 154. plFiberPlate : 10 possible sky positions to use as objects from a possible 153. plFiberPlate : 9 possible sky positions to use as objects from a possible 152. plFiberPlate : 11 possible sky positions to use as objects from a possible 151. plFiberPlate : 7 possible sky positions to use as objects from a possible 150. plFiberPlate : 2 possible sky positions to use as objects from a possible 149. plFiberPlate : 5 possible sky positions to use as objects from a possible 148. plFiberPlate : 7 possible sky positions to use as objects from a possible 147. plFiberPlate : 1 possible sky positions to use as objects from a possible 146. plFiberPlate : 5 possible sky positions to use as objects from a possible 145. plFiberPlate : 3 possible sky positions to use as objects from a possible 144. plFiberPlate : 3 possible sky positions to use as objects from a possible 143. plFiberPlate : 24 possible sky positions to use as objects from a possible 142. plFiberPlate : 23 possible sky positions to use as objects from a possible 141. plFiberPlate : 15 possible sky positions to use as objects from a possible 140. plFiberPlate : 12 possible sky positions to use as objects from a possible 139. plFiberPlate : 10 possible sky positions to use as objects from a possible 138. plFiberPlate : 3 possible sky positions to use as objects from a possible 137. plFiberPlate : 2 possible sky positions to use as objects from a possible 136. plFiberPlate : 2 possible sky positions to use as objects from a possible 135. plFiberPlate : 5 possible sky positions to use as objects from a possible 134. plFiberPlate : 21 possible sky positions to use as objects from a possible 133. plFiberPlate : 14 possible sky positions to use as objects from a possible 132. plFiberPlate : 17 possible sky positions to use as objects from a possible 131. plFiberPlate : 10 possible sky positions to use as objects from a possible 130. plFiberPlate : 15 possible sky positions to use as objects from a possible 129. plFiberPlate : 10 possible sky positions to use as objects from a possible 128. plFiberPlate : 5 possible sky positions to use as objects from a possible 127. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1412.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1413.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.1/plOverlay-1413.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Jul 2 13:36:32 CDT 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 4 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1410.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1410.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1410.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1411.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1411.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1411.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1412.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.0711,-7.8946) and (10.44,-7.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1412.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1412.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1413.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1413.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.8242,-10.6722) and (0.33,-12.09) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.1/plFanuc-1413.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Jul 2 13:36:44 CDT 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140ec15e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 4 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1410 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1411 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1412 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1413 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Jul 2 13:36:52 CDT 2003 Begin running plateEnder dr2003.07.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.07.1 -morePipes 1 failed. PS: Read file for stderr output of this job.