Sender: LSF System Subject: Job 106841: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Oct 29 12:03:36 2003 Results reported at Wed Oct 29 12:06:56 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_93 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.11.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 144.23 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Oct 29 12:03:37 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Oct 29 12:03:50 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_93/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed Oct 29 12:03:50 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_93/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_rnyca2 --------------------------------------------------------------- --------------------------------------------------------------- Wed Oct 29 12:03:51 CST 2003 Begin running plate --------------------------------------------------------------- Wed Oct 29 12:03:51 CST 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8b76c6c makePlates : beginning loop over plObs chain; makePlates : making 18 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1154.par makePlates : plateInfo struct for plate 1642 : (h4).mjd 53113 (h4).raCen 210.794 (h4).decCen 37.16739 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 210.794 37.167 210.794 38.667 plMakePlateFromTile : mjd of obs : 53113.755105 Observed HA/dec of plate center, fiducial point (deg) : 13.998 37.144 13.998 38.644 The rotation angle of the fid. point is -106.709328 plMakePlateFromTile : beginning loop over 1241 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1155.par makePlates : plateInfo struct for plate 1643 : (h4).mjd 53113 (h4).raCen 213.5473 (h4).decCen 36.3592 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 213.547 36.359 213.547 37.859 plMakePlateFromTile : mjd of obs : 53113.754417 Observed HA/dec of plate center, fiducial point (deg) : 10.998 36.337 10.998 37.836 The rotation angle of the fid. point is -108.257715 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1156.par makePlates : plateInfo struct for plate 1644 : (h4).mjd 53113 (h4).raCen 216.2264 (h4).decCen 35.76741 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 216.226 35.767 216.226 37.267 plMakePlateFromTile : mjd of obs : 53113.753524 Observed HA/dec of plate center, fiducial point (deg) : 7.998 35.745 7.998 37.245 The rotation angle of the fid. point is -111.881286 plMakePlateFromTile : beginning loop over 1278 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1157.par makePlates : plateInfo struct for plate 1645 : (h4).mjd 53113 (h4).raCen 218.6895 (h4).decCen 34.95805 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 218.690 34.958 218.690 36.458 plMakePlateFromTile : mjd of obs : 53113.754804 Observed HA/dec of plate center, fiducial point (deg) : 5.998 34.937 5.998 36.436 The rotation angle of the fid. point is -111.732593 plMakePlateFromTile : beginning loop over 1234 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1158.par makePlates : plateInfo struct for plate 1646 : (h4).mjd 53113 (h4).raCen 221.1208 (h4).decCen 34.08133 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 221.121 34.081 221.121 35.581 plMakePlateFromTile : mjd of obs : 53113.753225 Observed HA/dec of plate center, fiducial point (deg) : 2.998 34.060 2.998 35.560 The rotation angle of the fid. point is -116.287259 plMakePlateFromTile : beginning loop over 1244 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1159.par makePlates : plateInfo struct for plate 1647 : (h4).mjd 53113 (h4).raCen 223.5891 (h4).decCen 33.29286 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 223.589 33.293 223.589 34.793 plMakePlateFromTile : mjd of obs : 53113.754519 Observed HA/dec of plate center, fiducial point (deg) : 0.998 33.273 0.998 34.772 The rotation angle of the fid. point is -120.252064 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1160.par makePlates : plateInfo struct for plate 1648 : (h4).mjd 53113 (h4).raCen 226.1823 (h4).decCen 32.3062 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 226.182 32.306 226.182 33.806 plMakePlateFromTile : mjd of obs : 53113.756160 Observed HA/dec of plate center, fiducial point (deg) : -1.002 32.287 -1.002 33.786 The rotation angle of the fid. point is 59.462417 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1161.par makePlates : plateInfo struct for plate 1649 : (h4).mjd 53113 (h4).raCen 228.7046 (h4).decCen 31.2438 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 228.705 31.244 228.705 32.744 plMakePlateFromTile : mjd of obs : 53113.796399 Observed HA/dec of plate center, fiducial point (deg) : 10.998 31.225 10.998 32.725 The rotation angle of the fid. point is -77.659479 plMakePlateFromTile : beginning loop over 1267 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1162.par makePlates : plateInfo struct for plate 1650 : (h4).mjd 53113 (h4).raCen 230.536 (h4).decCen 30.44363 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 230.536 30.444 230.536 31.944 plMakePlateFromTile : mjd of obs : 53113.795930 Observed HA/dec of plate center, fiducial point (deg) : 8.998 30.426 8.998 31.925 The rotation angle of the fid. point is -70.612098 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1163.par makePlates : plateInfo struct for plate 1651 : (h4).mjd 53113 (h4).raCen 231.7897 (h4).decCen 29.92775 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.790 29.928 231.790 31.428 plMakePlateFromTile : mjd of obs : 53113.796632 Observed HA/dec of plate center, fiducial point (deg) : 7.998 29.910 7.998 31.410 The rotation angle of the fid. point is -65.180641 plMakePlateFromTile : beginning loop over 1267 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1164.par makePlates : plateInfo struct for plate 1652 : (h4).mjd 53113 (h4).raCen 233.4733 (h4).decCen 29.08555 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.473 29.086 233.473 30.586 plMakePlateFromTile : mjd of obs : 53113.837318 Observed HA/dec of plate center, fiducial point (deg) : 20.998 29.069 20.998 30.569 The rotation angle of the fid. point is -73.060588 plMakePlateFromTile : beginning loop over 1243 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1165.par makePlates : plateInfo struct for plate 1653 : (h4).mjd 53113 (h4).raCen 235.7078 (h4).decCen 27.96151 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 235.708 27.962 235.708 29.462 plMakePlateFromTile : mjd of obs : 53113.837966 Observed HA/dec of plate center, fiducial point (deg) : 18.998 27.946 18.998 29.446 The rotation angle of the fid. point is -68.894193 plMakePlateFromTile : beginning loop over 1243 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1166.par makePlates : plateInfo struct for plate 1654 : (h4).mjd 53113 (h4).raCen 237.8324 (h4).decCen 27.00441 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 237.832 27.004 237.832 28.504 plMakePlateFromTile : mjd of obs : 53113.838309 Observed HA/dec of plate center, fiducial point (deg) : 16.998 26.990 16.998 28.489 The rotation angle of the fid. point is -64.455713 plMakePlateFromTile : beginning loop over 1258 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1167.par makePlates : plateInfo struct for plate 1655 : (h4).mjd 53113 (h4).raCen 239.486 (h4).decCen 26.01652 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 239.486 26.017 239.486 27.517 plMakePlateFromTile : mjd of obs : 53113.837348 Observed HA/dec of plate center, fiducial point (deg) : 14.998 26.003 14.998 27.502 The rotation angle of the fid. point is -59.049004 plMakePlateFromTile : beginning loop over 1213 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1168.par makePlates : plateInfo struct for plate 1656 : (h4).mjd 53113 (h4).raCen 241.3963 (h4).decCen 24.90861 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.396 24.909 241.396 26.409 plMakePlateFromTile : mjd of obs : 53113.837098 Observed HA/dec of plate center, fiducial point (deg) : 12.998 24.896 12.998 26.395 The rotation angle of the fid. point is -52.300558 plMakePlateFromTile : beginning loop over 1227 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1169.par makePlates : plateInfo struct for plate 1657 : (h4).mjd 53113 (h4).raCen 243.6968 (h4).decCen 23.50179 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.697 23.502 243.697 25.002 plMakePlateFromTile : mjd of obs : 53113.837930 Observed HA/dec of plate center, fiducial point (deg) : 10.998 23.490 10.998 24.989 The rotation angle of the fid. point is -43.761655 plMakePlateFromTile : beginning loop over 1197 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1170.par makePlates : plateInfo struct for plate 1658 : (h4).mjd 53113 (h4).raCen 246.1954 (h4).decCen 22.04589 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 246.195 22.046 246.195 23.546 plMakePlateFromTile : mjd of obs : 53113.836539 Observed HA/dec of plate center, fiducial point (deg) : 7.998 22.035 7.998 23.535 The rotation angle of the fid. point is -31.705698 plMakePlateFromTile : beginning loop over 1184 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk82/complete//plPlugMapT-1171.par makePlates : plateInfo struct for plate 1659 : (h4).mjd 53113 (h4).raCen 248.3728 (h4).decCen 20.66016 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.373 20.660 248.373 22.160 plMakePlateFromTile : mjd of obs : 53113.878594 Observed HA/dec of plate center, fiducial point (deg) : 20.998 20.651 20.998 22.151 The rotation angle of the fid. point is -52.683904 plMakePlateFromTile : beginning loop over 1152 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Oct 29 12:04:38 CST 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 18 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1642.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 109 2 8 85 3 6 63 4 8 93 5 5 85 6 4 87 7 3 104 8 4 108 9 4 119 10 13 150 11 6 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 1 29 40 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 510 54 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 511 35 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 504 8 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 514 71 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 509 114 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 32 6 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 511 28 plFiberPlate : 110 possible sky positions to use as objects from a possible 550. plFiberPlate : 93 possible sky positions to use as objects from a possible 549. plFiberPlate : 53 possible sky positions to use as objects from a possible 548. plFiberPlate : 48 possible sky positions to use as objects from a possible 547. plFiberPlate : 27 possible sky positions to use as objects from a possible 546. plFiberPlate : 22 possible sky positions to use as objects from a possible 545. plFiberPlate : 40 possible sky positions to use as objects from a possible 544. plFiberPlate : 80 possible sky positions to use as objects from a possible 543. plFiberPlate : 66 possible sky positions to use as objects from a possible 542. plFiberPlate : 38 possible sky positions to use as objects from a possible 541. plFiberPlate : 27 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 16 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 19 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 58 possible sky positions to use as objects from a possible 534. plFiberPlate : 51 possible sky positions to use as objects from a possible 533. plFiberPlate : 44 possible sky positions to use as objects from a possible 532. plFiberPlate : 23 possible sky positions to use as objects from a possible 531. plFiberPlate : 29 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : 12 possible sky positions to use as objects from a possible 526. plFiberPlate : 50 possible sky positions to use as objects from a possible 525. plFiberPlate : 43 possible sky positions to use as objects from a possible 524. plFiberPlate : 33 possible sky positions to use as objects from a possible 523. plFiberPlate : 20 possible sky positions to use as objects from a possible 522. plFiberPlate : 26 possible sky positions to use as objects from a possible 521. plFiberPlate : 39 possible sky positions to use as objects from a possible 520. plFiberPlate : 13 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1642.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1642.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1643.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 114 2 8 64 3 4 45 4 9 94 5 2 135 6 3 98 7 9 89 8 4 106 9 3 99 10 5 136 11 9 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 534 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 521 87 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 520 59 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 48 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 37 13 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 528 28 plFiberPlate : adding spectro-photo std with objId = 4002 40 6 37 58 plFiberPlate : adding spectro-photo std with objId = 4002 40 6 42 120 plFiberPlate : 95 possible sky positions to use as objects from a possible 558. plFiberPlate : 76 possible sky positions to use as objects from a possible 557. plFiberPlate : 27 possible sky positions to use as objects from a possible 556. plFiberPlate : 22 possible sky positions to use as objects from a possible 555. plFiberPlate : 40 possible sky positions to use as objects from a possible 554. plFiberPlate : 30 possible sky positions to use as objects from a possible 553. plFiberPlate : 27 possible sky positions to use as objects from a possible 552. plFiberPlate : 79 possible sky positions to use as objects from a possible 551. plFiberPlate : 51 possible sky positions to use as objects from a possible 550. plFiberPlate : 32 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 3 possible sky positions to use as objects from a possible 546. plFiberPlate : 4 possible sky positions to use as objects from a possible 545. plFiberPlate : 21 possible sky positions to use as objects from a possible 544. plFiberPlate : 19 possible sky positions to use as objects from a possible 543. plFiberPlate : 71 possible sky positions to use as objects from a possible 542. plFiberPlate : 39 possible sky positions to use as objects from a possible 541. plFiberPlate : 26 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 23 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 62 possible sky positions to use as objects from a possible 533. plFiberPlate : 40 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 14 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1642.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1643.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1643.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1644.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 129 2 5 86 3 3 54 4 7 79 5 8 128 6 6 99 7 8 90 8 6 112 9 6 106 10 8 130 11 7 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 1 62 65 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 64 110 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 537 138 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 547 50 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 66 57 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 59 23 plFiberPlate : adding spectro-photo std with objId = 4002 40 6 61 89 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 54 149 plFiberPlate : 79 possible sky positions to use as objects from a possible 570. plFiberPlate : 50 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 23 possible sky positions to use as objects from a possible 567. plFiberPlate : 18 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : 57 possible sky positions to use as objects from a possible 564. plFiberPlate : 66 possible sky positions to use as objects from a possible 563. plFiberPlate : 43 possible sky positions to use as objects from a possible 562. plFiberPlate : 33 possible sky positions to use as objects from a possible 561. plFiberPlate : 27 possible sky positions to use as objects from a possible 560. plFiberPlate : 20 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 15 possible sky positions to use as objects from a possible 557. plFiberPlate : 40 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 71 possible sky positions to use as objects from a possible 554. plFiberPlate : 31 possible sky positions to use as objects from a possible 553. plFiberPlate : 27 possible sky positions to use as objects from a possible 552. plFiberPlate : 16 possible sky positions to use as objects from a possible 551. plFiberPlate : 10 possible sky positions to use as objects from a possible 550. plFiberPlate : 19 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 20 possible sky positions to use as objects from a possible 547. plFiberPlate : 31 possible sky positions to use as objects from a possible 546. plFiberPlate : 73 possible sky positions to use as objects from a possible 545. plFiberPlate : 26 possible sky positions to use as objects from a possible 544. plFiberPlate : 19 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 22 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1643.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1644.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1644.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1645.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 124 2 7 82 3 1 51 4 2 84 5 7 116 6 5 89 7 6 85 8 6 106 9 5 99 10 8 129 11 13 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 561 80 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 74 110 plFiberPlate : adding spectro-photo std with objId = 4002 40 1 70 39 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 565 75 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 560 49 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 66 57 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 78 138 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 555 85 plFiberPlate : 86 possible sky positions to use as objects from a possible 536. plFiberPlate : 41 possible sky positions to use as objects from a possible 535. plFiberPlate : 27 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 32 possible sky positions to use as objects from a possible 531. plFiberPlate : 55 possible sky positions to use as objects from a possible 530. plFiberPlate : 55 possible sky positions to use as objects from a possible 529. plFiberPlate : 48 possible sky positions to use as objects from a possible 528. plFiberPlate : 29 possible sky positions to use as objects from a possible 527. plFiberPlate : 24 possible sky positions to use as objects from a possible 526. plFiberPlate : 16 possible sky positions to use as objects from a possible 525. plFiberPlate : 17 possible sky positions to use as objects from a possible 524. plFiberPlate : 18 possible sky positions to use as objects from a possible 523. plFiberPlate : 14 possible sky positions to use as objects from a possible 522. plFiberPlate : 21 possible sky positions to use as objects from a possible 521. plFiberPlate : 67 possible sky positions to use as objects from a possible 520. plFiberPlate : 49 possible sky positions to use as objects from a possible 519. plFiberPlate : 40 possible sky positions to use as objects from a possible 518. plFiberPlate : 14 possible sky positions to use as objects from a possible 517. plFiberPlate : 13 possible sky positions to use as objects from a possible 516. plFiberPlate : 9 possible sky positions to use as objects from a possible 515. plFiberPlate : 13 possible sky positions to use as objects from a possible 514. plFiberPlate : 22 possible sky positions to use as objects from a possible 513. plFiberPlate : 6 possible sky positions to use as objects from a possible 512. plFiberPlate : 51 possible sky positions to use as objects from a possible 511. plFiberPlate : 47 possible sky positions to use as objects from a possible 510. plFiberPlate : 32 possible sky positions to use as objects from a possible 509. plFiberPlate : 15 possible sky positions to use as objects from a possible 508. plFiberPlate : 8 possible sky positions to use as objects from a possible 507. plFiberPlate : 16 possible sky positions to use as objects from a possible 506. plFiberPlate : 40 possible sky positions to use as objects from a possible 505. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1644.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1645.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1645.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1646.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 109 2 5 73 3 4 43 4 6 76 5 8 120 6 7 98 7 8 99 8 10 109 9 10 97 10 11 124 11 6 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 576 94 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 567 72 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 96 28 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 577 47 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 570 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 575 163 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 567 97 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 94 22 plFiberPlate : 73 possible sky positions to use as objects from a possible 529. plFiberPlate : 39 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 13 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 26 possible sky positions to use as objects from a possible 523. plFiberPlate : 65 possible sky positions to use as objects from a possible 522. plFiberPlate : 28 possible sky positions to use as objects from a possible 521. plFiberPlate : 17 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 6 possible sky positions to use as objects from a possible 516. plFiberPlate : 9 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 68 possible sky positions to use as objects from a possible 513. plFiberPlate : 34 possible sky positions to use as objects from a possible 512. plFiberPlate : 20 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 10 possible sky positions to use as objects from a possible 509. plFiberPlate : 9 possible sky positions to use as objects from a possible 508. plFiberPlate : 17 possible sky positions to use as objects from a possible 507. plFiberPlate : 14 possible sky positions to use as objects from a possible 506. plFiberPlate : 9 possible sky positions to use as objects from a possible 505. plFiberPlate : 49 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 8 possible sky positions to use as objects from a possible 500. plFiberPlate : 15 possible sky positions to use as objects from a possible 499. plFiberPlate : 15 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1645.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1646.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1646.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1647.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 126 2 9 69 3 4 38 4 6 81 5 12 118 6 10 98 7 13 96 8 13 109 9 11 110 10 7 109 11 8 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 106 13 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 577 47 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 106 97 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 580 17 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 94 22 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 575 163 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 586 48 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 110 92 plFiberPlate : 77 possible sky positions to use as objects from a possible 548. plFiberPlate : 38 possible sky positions to use as objects from a possible 547. plFiberPlate : 32 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 62 possible sky positions to use as objects from a possible 542. plFiberPlate : 68 possible sky positions to use as objects from a possible 541. plFiberPlate : 54 possible sky positions to use as objects from a possible 540. plFiberPlate : 38 possible sky positions to use as objects from a possible 539. plFiberPlate : 21 possible sky positions to use as objects from a possible 538. plFiberPlate : 13 possible sky positions to use as objects from a possible 537. plFiberPlate : 8 possible sky positions to use as objects from a possible 536. plFiberPlate : 3 possible sky positions to use as objects from a possible 535. plFiberPlate : 12 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 67 possible sky positions to use as objects from a possible 532. plFiberPlate : 40 possible sky positions to use as objects from a possible 531. plFiberPlate : 29 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 4 possible sky positions to use as objects from a possible 528. plFiberPlate : 18 possible sky positions to use as objects from a possible 527. plFiberPlate : 17 possible sky positions to use as objects from a possible 526. plFiberPlate : 9 possible sky positions to use as objects from a possible 525. plFiberPlate : 6 possible sky positions to use as objects from a possible 524. plFiberPlate : 53 possible sky positions to use as objects from a possible 523. plFiberPlate : 41 possible sky positions to use as objects from a possible 522. plFiberPlate : 25 possible sky positions to use as objects from a possible 521. plFiberPlate : 15 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 24 possible sky positions to use as objects from a possible 518. plFiberPlate : 22 possible sky positions to use as objects from a possible 517. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1646.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1647.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1647.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1648.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 123 2 14 82 3 8 43 4 8 73 5 11 100 6 9 91 7 12 112 8 13 102 9 18 106 10 18 144 11 12 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 608 41 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 602 41 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 115 29 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 117 103 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 113 126 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 607 88 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 110 92 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 604 81 plFiberPlate : 79 possible sky positions to use as objects from a possible 530. plFiberPlate : 49 possible sky positions to use as objects from a possible 529. plFiberPlate : 33 possible sky positions to use as objects from a possible 528. plFiberPlate : 26 possible sky positions to use as objects from a possible 527. plFiberPlate : 43 possible sky positions to use as objects from a possible 526. plFiberPlate : 26 possible sky positions to use as objects from a possible 525. plFiberPlate : 24 possible sky positions to use as objects from a possible 524. plFiberPlate : 50 possible sky positions to use as objects from a possible 523. plFiberPlate : 35 possible sky positions to use as objects from a possible 522. plFiberPlate : 26 possible sky positions to use as objects from a possible 521. plFiberPlate : 20 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 18 possible sky positions to use as objects from a possible 517. plFiberPlate : 8 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 51 possible sky positions to use as objects from a possible 514. plFiberPlate : 49 possible sky positions to use as objects from a possible 513. plFiberPlate : 38 possible sky positions to use as objects from a possible 512. plFiberPlate : 29 possible sky positions to use as objects from a possible 511. plFiberPlate : 17 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 9 possible sky positions to use as objects from a possible 508. plFiberPlate : 17 possible sky positions to use as objects from a possible 507. plFiberPlate : 6 possible sky positions to use as objects from a possible 506. plFiberPlate : 50 possible sky positions to use as objects from a possible 505. plFiberPlate : 54 possible sky positions to use as objects from a possible 504. plFiberPlate : 37 possible sky positions to use as objects from a possible 503. plFiberPlate : 32 possible sky positions to use as objects from a possible 502. plFiberPlate : 26 possible sky positions to use as objects from a possible 501. plFiberPlate : 43 possible sky positions to use as objects from a possible 500. plFiberPlate : 35 possible sky positions to use as objects from a possible 499. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1647.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1648.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1648.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1649.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 116 2 9 66 3 9 32 4 10 60 5 8 126 6 6 104 7 10 96 8 12 109 9 11 100 10 16 108 11 17 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 142 84 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 625 36 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 130 112 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 621 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 608 41 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 619 46 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 607 88 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 611 132 plFiberPlate : 49 possible sky positions to use as objects from a possible 521. plFiberPlate : 31 possible sky positions to use as objects from a possible 520. plFiberPlate : 24 possible sky positions to use as objects from a possible 519. plFiberPlate : 33 possible sky positions to use as objects from a possible 518. plFiberPlate : 23 possible sky positions to use as objects from a possible 517. plFiberPlate : 19 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 52 possible sky positions to use as objects from a possible 514. plFiberPlate : 41 possible sky positions to use as objects from a possible 513. plFiberPlate : 28 possible sky positions to use as objects from a possible 512. plFiberPlate : 18 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 16 possible sky positions to use as objects from a possible 509. plFiberPlate : 30 possible sky positions to use as objects from a possible 508. plFiberPlate : 10 possible sky positions to use as objects from a possible 507. plFiberPlate : 4 possible sky positions to use as objects from a possible 506. plFiberPlate : 73 possible sky positions to use as objects from a possible 505. plFiberPlate : 33 possible sky positions to use as objects from a possible 504. plFiberPlate : 17 possible sky positions to use as objects from a possible 503. plFiberPlate : 4 possible sky positions to use as objects from a possible 502. plFiberPlate : 5 possible sky positions to use as objects from a possible 501. plFiberPlate : 11 possible sky positions to use as objects from a possible 500. plFiberPlate : 16 possible sky positions to use as objects from a possible 499. plFiberPlate : 10 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 86 possible sky positions to use as objects from a possible 496. plFiberPlate : 50 possible sky positions to use as objects from a possible 495. plFiberPlate : 24 possible sky positions to use as objects from a possible 494. plFiberPlate : 13 possible sky positions to use as objects from a possible 493. plFiberPlate : 5 possible sky positions to use as objects from a possible 492. plFiberPlate : 19 possible sky positions to use as objects from a possible 491. plFiberPlate : 30 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1648.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1649.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1649.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1650.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 102 2 5 55 3 7 26 4 12 69 5 19 135 6 10 103 7 4 107 8 10 117 9 6 100 10 13 106 11 11 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 140 35 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 148 69 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 150 100 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 145 87 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 621 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 619 12 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 144 25 plFiberPlate : adding spectro-photo std with objId = 4002 40 1 148 51 plFiberPlate : 53 possible sky positions to use as objects from a possible 522. plFiberPlate : 24 possible sky positions to use as objects from a possible 521. plFiberPlate : 22 possible sky positions to use as objects from a possible 520. plFiberPlate : 9 possible sky positions to use as objects from a possible 519. plFiberPlate : 20 possible sky positions to use as objects from a possible 518. plFiberPlate : 19 possible sky positions to use as objects from a possible 517. plFiberPlate : 18 possible sky positions to use as objects from a possible 516. plFiberPlate : 53 possible sky positions to use as objects from a possible 515. plFiberPlate : 41 possible sky positions to use as objects from a possible 514. plFiberPlate : 14 possible sky positions to use as objects from a possible 513. plFiberPlate : 19 possible sky positions to use as objects from a possible 512. plFiberPlate : 2 possible sky positions to use as objects from a possible 511. plFiberPlate : 4 possible sky positions to use as objects from a possible 510. plFiberPlate : 12 possible sky positions to use as objects from a possible 509. plFiberPlate : 18 possible sky positions to use as objects from a possible 508. plFiberPlate : 15 possible sky positions to use as objects from a possible 507. plFiberPlate : 73 possible sky positions to use as objects from a possible 506. plFiberPlate : 30 possible sky positions to use as objects from a possible 505. plFiberPlate : 12 possible sky positions to use as objects from a possible 504. plFiberPlate : 5 possible sky positions to use as objects from a possible 503. plFiberPlate : 5 possible sky positions to use as objects from a possible 502. plFiberPlate : 8 possible sky positions to use as objects from a possible 501. plFiberPlate : 24 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 8 possible sky positions to use as objects from a possible 498. plFiberPlate : 53 possible sky positions to use as objects from a possible 497. plFiberPlate : 51 possible sky positions to use as objects from a possible 496. plFiberPlate : 32 possible sky positions to use as objects from a possible 495. plFiberPlate : 3 possible sky positions to use as objects from a possible 494. plFiberPlate : 1 possible sky positions to use as objects from a possible 493. plFiberPlate : 5 possible sky positions to use as objects from a possible 492. plFiberPlate : 66 possible sky positions to use as objects from a possible 491. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1649.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1650.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1650.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1651.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 133 2 4 84 3 3 35 4 8 56 5 13 106 6 8 111 7 8 105 8 14 111 9 14 107 10 8 123 11 8 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 640 71 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 148 69 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 152 57 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 646 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 629 85 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 160 130 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 160 87 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 144 25 plFiberPlate : 53 possible sky positions to use as objects from a possible 534. plFiberPlate : 37 possible sky positions to use as objects from a possible 533. plFiberPlate : 18 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 33 possible sky positions to use as objects from a possible 530. plFiberPlate : 44 possible sky positions to use as objects from a possible 529. plFiberPlate : 55 possible sky positions to use as objects from a possible 528. plFiberPlate : 33 possible sky positions to use as objects from a possible 527. plFiberPlate : 25 possible sky positions to use as objects from a possible 526. plFiberPlate : 17 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 7 possible sky positions to use as objects from a possible 522. plFiberPlate : 3 possible sky positions to use as objects from a possible 521. plFiberPlate : 17 possible sky positions to use as objects from a possible 520. plFiberPlate : 36 possible sky positions to use as objects from a possible 519. plFiberPlate : 72 possible sky positions to use as objects from a possible 518. plFiberPlate : 61 possible sky positions to use as objects from a possible 517. plFiberPlate : 38 possible sky positions to use as objects from a possible 516. plFiberPlate : 31 possible sky positions to use as objects from a possible 515. plFiberPlate : 26 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : 13 possible sky positions to use as objects from a possible 511. plFiberPlate : 39 possible sky positions to use as objects from a possible 510. plFiberPlate : 20 possible sky positions to use as objects from a possible 509. plFiberPlate : 36 possible sky positions to use as objects from a possible 508. plFiberPlate : 32 possible sky positions to use as objects from a possible 507. plFiberPlate : 55 possible sky positions to use as objects from a possible 506. plFiberPlate : 42 possible sky positions to use as objects from a possible 505. plFiberPlate : 27 possible sky positions to use as objects from a possible 504. plFiberPlate : 13 possible sky positions to use as objects from a possible 503. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1650.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1651.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1651.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1652.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 135 2 13 67 3 1 28 4 4 46 5 5 108 6 9 98 7 9 95 8 6 117 9 9 100 10 16 108 11 16 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 166 134 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 173 92 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 168 33 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 160 87 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 160 130 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 167 92 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 648 62 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 657 68 plFiberPlate : 48 possible sky positions to use as objects from a possible 499. plFiberPlate : 35 possible sky positions to use as objects from a possible 498. plFiberPlate : 19 possible sky positions to use as objects from a possible 497. plFiberPlate : 12 possible sky positions to use as objects from a possible 496. plFiberPlate : 6 possible sky positions to use as objects from a possible 495. plFiberPlate : 21 possible sky positions to use as objects from a possible 494. plFiberPlate : 80 possible sky positions to use as objects from a possible 493. plFiberPlate : 25 possible sky positions to use as objects from a possible 492. plFiberPlate : 26 possible sky positions to use as objects from a possible 491. plFiberPlate : 27 possible sky positions to use as objects from a possible 490. plFiberPlate : 19 possible sky positions to use as objects from a possible 489. plFiberPlate : 17 possible sky positions to use as objects from a possible 488. plFiberPlate : 12 possible sky positions to use as objects from a possible 487. plFiberPlate : 13 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 10 possible sky positions to use as objects from a possible 484. plFiberPlate : 46 possible sky positions to use as objects from a possible 483. plFiberPlate : 39 possible sky positions to use as objects from a possible 482. plFiberPlate : 37 possible sky positions to use as objects from a possible 481. plFiberPlate : 20 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 4 possible sky positions to use as objects from a possible 478. plFiberPlate : 11 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 8 possible sky positions to use as objects from a possible 475. plFiberPlate : 44 possible sky positions to use as objects from a possible 474. plFiberPlate : 49 possible sky positions to use as objects from a possible 473. plFiberPlate : 37 possible sky positions to use as objects from a possible 472. plFiberPlate : 20 possible sky positions to use as objects from a possible 471. plFiberPlate : 21 possible sky positions to use as objects from a possible 470. plFiberPlate : 9 possible sky positions to use as objects from a possible 469. plFiberPlate : 26 possible sky positions to use as objects from a possible 468. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1651.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1652.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1652.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1653.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 117 2 9 54 3 1 15 4 5 51 5 11 104 6 9 83 7 15 97 8 10 105 9 10 90 10 14 98 11 17 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 658 117 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 667 75 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 177 109 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 178 110 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 657 68 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 670 36 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 673 40 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 657 96 plFiberPlate : 53 possible sky positions to use as objects from a possible 476. plFiberPlate : 29 possible sky positions to use as objects from a possible 475. plFiberPlate : 21 possible sky positions to use as objects from a possible 474. plFiberPlate : 20 possible sky positions to use as objects from a possible 473. plFiberPlate : 22 possible sky positions to use as objects from a possible 472. plFiberPlate : 30 possible sky positions to use as objects from a possible 471. plFiberPlate : 25 possible sky positions to use as objects from a possible 470. plFiberPlate : 42 possible sky positions to use as objects from a possible 469. plFiberPlate : 34 possible sky positions to use as objects from a possible 468. plFiberPlate : 14 possible sky positions to use as objects from a possible 467. plFiberPlate : 4 possible sky positions to use as objects from a possible 466. plFiberPlate : 8 possible sky positions to use as objects from a possible 465. plFiberPlate : 9 possible sky positions to use as objects from a possible 464. plFiberPlate : 11 possible sky positions to use as objects from a possible 463. plFiberPlate : 2 possible sky positions to use as objects from a possible 462. plFiberPlate : 9 possible sky positions to use as objects from a possible 461. plFiberPlate : 49 possible sky positions to use as objects from a possible 460. plFiberPlate : 34 possible sky positions to use as objects from a possible 459. plFiberPlate : 14 possible sky positions to use as objects from a possible 458. plFiberPlate : 6 possible sky positions to use as objects from a possible 457. plFiberPlate : 5 possible sky positions to use as objects from a possible 456. plFiberPlate : 12 possible sky positions to use as objects from a possible 455. plFiberPlate : 9 possible sky positions to use as objects from a possible 454. plFiberPlate : 5 possible sky positions to use as objects from a possible 453. plFiberPlate : 8 possible sky positions to use as objects from a possible 452. plFiberPlate : 50 possible sky positions to use as objects from a possible 451. plFiberPlate : 30 possible sky positions to use as objects from a possible 450. plFiberPlate : 40 possible sky positions to use as objects from a possible 449. plFiberPlate : 22 possible sky positions to use as objects from a possible 448. plFiberPlate : 17 possible sky positions to use as objects from a possible 447. plFiberPlate : 8 possible sky positions to use as objects from a possible 446. plFiberPlate : 31 possible sky positions to use as objects from a possible 445. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1652.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1653.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1653.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1654.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 109 2 8 82 3 2 28 4 5 53 5 15 116 6 6 102 7 7 100 8 6 101 9 8 89 10 11 121 11 11 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 684 75 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 672 167 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 679 56 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 675 75 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 193 47 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 670 36 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 675 31 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 673 40 plFiberPlate : 52 possible sky positions to use as objects from a possible 502. plFiberPlate : 30 possible sky positions to use as objects from a possible 501. plFiberPlate : 17 possible sky positions to use as objects from a possible 500. plFiberPlate : 15 possible sky positions to use as objects from a possible 499. plFiberPlate : 24 possible sky positions to use as objects from a possible 498. plFiberPlate : 39 possible sky positions to use as objects from a possible 497. plFiberPlate : 32 possible sky positions to use as objects from a possible 496. plFiberPlate : 51 possible sky positions to use as objects from a possible 495. plFiberPlate : 24 possible sky positions to use as objects from a possible 494. plFiberPlate : 24 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 10 possible sky positions to use as objects from a possible 491. plFiberPlate : 9 possible sky positions to use as objects from a possible 490. plFiberPlate : 12 possible sky positions to use as objects from a possible 489. plFiberPlate : 5 possible sky positions to use as objects from a possible 488. plFiberPlate : 10 possible sky positions to use as objects from a possible 487. plFiberPlate : 39 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : 7 possible sky positions to use as objects from a possible 484. plFiberPlate : 1 possible sky positions to use as objects from a possible 483. plFiberPlate : 2 possible sky positions to use as objects from a possible 482. plFiberPlate : 2 possible sky positions to use as objects from a possible 481. plFiberPlate : 1 possible sky positions to use as objects from a possible 480. plFiberPlate : 7 possible sky positions to use as objects from a possible 479. plFiberPlate : 17 possible sky positions to use as objects from a possible 478. plFiberPlate : 77 possible sky positions to use as objects from a possible 477. plFiberPlate : 66 possible sky positions to use as objects from a possible 476. plFiberPlate : 25 possible sky positions to use as objects from a possible 475. plFiberPlate : 11 possible sky positions to use as objects from a possible 474. plFiberPlate : 3 possible sky positions to use as objects from a possible 473. plFiberPlate : 2 possible sky positions to use as objects from a possible 472. plFiberPlate : 3 possible sky positions to use as objects from a possible 471. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1653.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1654.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1654.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1655.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 107 2 12 67 3 2 21 4 1 56 5 13 113 6 5 88 7 7 86 8 7 101 9 8 86 10 13 98 11 11 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 204 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 684 75 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 694 42 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 204 121 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 691 93 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 198 79 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 214 61 plFiberPlate : adding spectro-photo std with objId = 3927 40 2 89 123 plFiberPlate : 49 possible sky positions to use as objects from a possible 466. plFiberPlate : 18 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : 20 possible sky positions to use as objects from a possible 463. plFiberPlate : 34 possible sky positions to use as objects from a possible 462. plFiberPlate : 43 possible sky positions to use as objects from a possible 461. plFiberPlate : 13 possible sky positions to use as objects from a possible 460. plFiberPlate : 42 possible sky positions to use as objects from a possible 459. plFiberPlate : 36 possible sky positions to use as objects from a possible 458. plFiberPlate : 5 possible sky positions to use as objects from a possible 457. plFiberPlate : 4 possible sky positions to use as objects from a possible 456. plFiberPlate : 3 possible sky positions to use as objects from a possible 455. plFiberPlate : 3 possible sky positions to use as objects from a possible 454. plFiberPlate : 13 possible sky positions to use as objects from a possible 453. plFiberPlate : 8 possible sky positions to use as objects from a possible 452. plFiberPlate : 24 possible sky positions to use as objects from a possible 451. plFiberPlate : 48 possible sky positions to use as objects from a possible 450. plFiberPlate : 33 possible sky positions to use as objects from a possible 449. plFiberPlate : 6 possible sky positions to use as objects from a possible 448. plFiberPlate : 11 possible sky positions to use as objects from a possible 447. plFiberPlate : 2 possible sky positions to use as objects from a possible 446. plFiberPlate : 3 possible sky positions to use as objects from a possible 445. plFiberPlate : 3 possible sky positions to use as objects from a possible 444. plFiberPlate : 3 possible sky positions to use as objects from a possible 443. plFiberPlate : 12 possible sky positions to use as objects from a possible 442. plFiberPlate : 30 possible sky positions to use as objects from a possible 441. plFiberPlate : 36 possible sky positions to use as objects from a possible 440. plFiberPlate : 27 possible sky positions to use as objects from a possible 439. plFiberPlate : 12 possible sky positions to use as objects from a possible 438. plFiberPlate : 6 possible sky positions to use as objects from a possible 437. plFiberPlate : 1 possible sky positions to use as objects from a possible 436. plFiberPlate : 17 possible sky positions to use as objects from a possible 435. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1654.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1655.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1655.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1656.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 109 2 6 51 3 1 9 4 6 39 5 11 100 6 9 102 7 14 116 8 11 117 9 12 106 10 12 87 11 12 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 211 43 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 219 186 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 703 55 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 703 185 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 223 146 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 711 14 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 214 61 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 702 71 plFiberPlate : 27 possible sky positions to use as objects from a possible 477. plFiberPlate : 14 possible sky positions to use as objects from a possible 476. plFiberPlate : 19 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 24 possible sky positions to use as objects from a possible 473. plFiberPlate : 19 possible sky positions to use as objects from a possible 472. plFiberPlate : 28 possible sky positions to use as objects from a possible 471. plFiberPlate : 35 possible sky positions to use as objects from a possible 470. plFiberPlate : 20 possible sky positions to use as objects from a possible 469. plFiberPlate : 14 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 7 possible sky positions to use as objects from a possible 466. plFiberPlate : 17 possible sky positions to use as objects from a possible 465. plFiberPlate : 13 possible sky positions to use as objects from a possible 464. plFiberPlate : 7 possible sky positions to use as objects from a possible 463. plFiberPlate : 20 possible sky positions to use as objects from a possible 462. plFiberPlate : 53 possible sky positions to use as objects from a possible 461. plFiberPlate : 28 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 12 possible sky positions to use as objects from a possible 458. plFiberPlate : 10 possible sky positions to use as objects from a possible 457. plFiberPlate : 11 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 13 possible sky positions to use as objects from a possible 454. plFiberPlate : 25 possible sky positions to use as objects from a possible 453. plFiberPlate : 48 possible sky positions to use as objects from a possible 452. plFiberPlate : 51 possible sky positions to use as objects from a possible 451. plFiberPlate : 38 possible sky positions to use as objects from a possible 450. plFiberPlate : 29 possible sky positions to use as objects from a possible 449. plFiberPlate : 26 possible sky positions to use as objects from a possible 448. plFiberPlate : 20 possible sky positions to use as objects from a possible 447. plFiberPlate : 62 possible sky positions to use as objects from a possible 446. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1655.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1656.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1656.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1657.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 104 2 4 48 3 0 8 4 1 32 5 11 92 6 8 92 7 9 98 8 14 111 9 7 95 10 6 88 11 7 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 3 at -121.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 712 31 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 722 43 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 727 68 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 239 76 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 228 182 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 711 14 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 728 179 plFiberPlate : adding spectro-photo std with objId = 4002 40 5 235 104 plFiberPlate : 31 possible sky positions to use as objects from a possible 433. plFiberPlate : 21 possible sky positions to use as objects from a possible 432. plFiberPlate : 10 possible sky positions to use as objects from a possible 431. plFiberPlate : 15 possible sky positions to use as objects from a possible 430. plFiberPlate : 16 possible sky positions to use as objects from a possible 429. plFiberPlate : 11 possible sky positions to use as objects from a possible 428. plFiberPlate : 35 possible sky positions to use as objects from a possible 427. plFiberPlate : 27 possible sky positions to use as objects from a possible 426. plFiberPlate : 22 possible sky positions to use as objects from a possible 425. plFiberPlate : 14 possible sky positions to use as objects from a possible 424. plFiberPlate : 10 possible sky positions to use as objects from a possible 423. plFiberPlate : 6 possible sky positions to use as objects from a possible 422. plFiberPlate : 2 possible sky positions to use as objects from a possible 421. plFiberPlate : 5 possible sky positions to use as objects from a possible 420. plFiberPlate : 7 possible sky positions to use as objects from a possible 419. plFiberPlate : 14 possible sky positions to use as objects from a possible 418. plFiberPlate : 39 possible sky positions to use as objects from a possible 417. plFiberPlate : 24 possible sky positions to use as objects from a possible 416. plFiberPlate : 23 possible sky positions to use as objects from a possible 415. plFiberPlate : 15 possible sky positions to use as objects from a possible 414. plFiberPlate : 14 possible sky positions to use as objects from a possible 413. plFiberPlate : 9 possible sky positions to use as objects from a possible 412. plFiberPlate : 6 possible sky positions to use as objects from a possible 411. plFiberPlate : 10 possible sky positions to use as objects from a possible 410. plFiberPlate : 20 possible sky positions to use as objects from a possible 409. plFiberPlate : 57 possible sky positions to use as objects from a possible 408. plFiberPlate : 47 possible sky positions to use as objects from a possible 407. plFiberPlate : 38 possible sky positions to use as objects from a possible 406. plFiberPlate : 36 possible sky positions to use as objects from a possible 405. plFiberPlate : 22 possible sky positions to use as objects from a possible 404. plFiberPlate : 21 possible sky positions to use as objects from a possible 403. plFiberPlate : 50 possible sky positions to use as objects from a possible 402. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1656.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1657.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1657.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1658.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 92 2 7 52 3 1 17 4 5 25 5 7 102 6 9 81 7 16 97 8 18 115 9 8 97 10 9 88 11 8 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 253 163 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 252 123 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 253 99 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 741 219 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 741 74 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 728 179 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 257 102 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 746 103 plFiberPlate : 35 possible sky positions to use as objects from a possible 426. plFiberPlate : 14 possible sky positions to use as objects from a possible 425. plFiberPlate : 30 possible sky positions to use as objects from a possible 424. plFiberPlate : 8 possible sky positions to use as objects from a possible 423. plFiberPlate : 9 possible sky positions to use as objects from a possible 422. plFiberPlate : 16 possible sky positions to use as objects from a possible 421. plFiberPlate : 12 possible sky positions to use as objects from a possible 420. plFiberPlate : 26 possible sky positions to use as objects from a possible 419. plFiberPlate : 20 possible sky positions to use as objects from a possible 418. plFiberPlate : 18 possible sky positions to use as objects from a possible 417. plFiberPlate : 8 possible sky positions to use as objects from a possible 416. plFiberPlate : 10 possible sky positions to use as objects from a possible 415. plFiberPlate : 10 possible sky positions to use as objects from a possible 414. plFiberPlate : 6 possible sky positions to use as objects from a possible 413. plFiberPlate : 11 possible sky positions to use as objects from a possible 412. plFiberPlate : 7 possible sky positions to use as objects from a possible 411. plFiberPlate : 45 possible sky positions to use as objects from a possible 410. plFiberPlate : 47 possible sky positions to use as objects from a possible 409. plFiberPlate : 30 possible sky positions to use as objects from a possible 408. plFiberPlate : 20 possible sky positions to use as objects from a possible 407. plFiberPlate : 10 possible sky positions to use as objects from a possible 406. plFiberPlate : 8 possible sky positions to use as objects from a possible 405. plFiberPlate : 3 possible sky positions to use as objects from a possible 404. plFiberPlate : 6 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 44 possible sky positions to use as objects from a possible 401. plFiberPlate : 35 possible sky positions to use as objects from a possible 400. plFiberPlate : 41 possible sky positions to use as objects from a possible 399. plFiberPlate : 27 possible sky positions to use as objects from a possible 398. plFiberPlate : 20 possible sky positions to use as objects from a possible 397. plFiberPlate : 21 possible sky positions to use as objects from a possible 396. plFiberPlate : 29 possible sky positions to use as objects from a possible 395. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1657.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1658.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1658.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.3/plPlugMapP-1659.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 103 2 0 49 3 0 7 4 5 23 5 12 87 6 6 77 7 10 97 8 20 102 9 4 89 10 2 83 11 3 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate: No obj found for coherent fiber 3 at -121.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 261 191 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 744 275 plFiberPlate : adding spectro-photo std with objId = 4002 40 2 279 109 plFiberPlate : adding spectro-photo std with objId = 4002 40 4 273 93 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 273 79 plFiberPlate : adding spectro-photo std with objId = 4002 40 3 270 241 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 761 22 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 746 103 plFiberPlate : 23 possible sky positions to use as objects from a possible 405. plFiberPlate : 27 possible sky positions to use as objects from a possible 404. plFiberPlate : 10 possible sky positions to use as objects from a possible 403. plFiberPlate : 14 possible sky positions to use as objects from a possible 402. plFiberPlate : 9 possible sky positions to use as objects from a possible 401. plFiberPlate : 11 possible sky positions to use as objects from a possible 400. plFiberPlate : 18 possible sky positions to use as objects from a possible 399. plFiberPlate : 20 possible sky positions to use as objects from a possible 398. plFiberPlate : 14 possible sky positions to use as objects from a possible 397. plFiberPlate : 6 possible sky positions to use as objects from a possible 396. plFiberPlate : 3 possible sky positions to use as objects from a possible 395. plFiberPlate : 2 possible sky positions to use as objects from a possible 394. plFiberPlate : 11 possible sky positions to use as objects from a possible 393. plFiberPlate : 19 possible sky positions to use as objects from a possible 392. plFiberPlate : 8 possible sky positions to use as objects from a possible 391. plFiberPlate : 11 possible sky positions to use as objects from a possible 390. plFiberPlate : 44 possible sky positions to use as objects from a possible 389. plFiberPlate : 22 possible sky positions to use as objects from a possible 388. plFiberPlate : 15 possible sky positions to use as objects from a possible 387. plFiberPlate : 14 possible sky positions to use as objects from a possible 386. plFiberPlate : 10 possible sky positions to use as objects from a possible 385. plFiberPlate : 6 possible sky positions to use as objects from a possible 384. plFiberPlate : 8 possible sky positions to use as objects from a possible 383. plFiberPlate : 1 possible sky positions to use as objects from a possible 382. plFiberPlate : 20 possible sky positions to use as objects from a possible 381. plFiberPlate : 45 possible sky positions to use as objects from a possible 380. plFiberPlate : 19 possible sky positions to use as objects from a possible 379. plFiberPlate : 17 possible sky positions to use as objects from a possible 378. plFiberPlate : 15 possible sky positions to use as objects from a possible 377. plFiberPlate : 17 possible sky positions to use as objects from a possible 376. plFiberPlate : 15 possible sky positions to use as objects from a possible 375. plFiberPlate : 24 possible sky positions to use as objects from a possible 374. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1658.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1659.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.3/plOverlay-1659.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Oct 29 12:05:08 CST 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 18 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1642.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1642.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1642.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1643.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7752,-4.7150) and (12.16,-3.91) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1643.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1643.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1644.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1925,-7.6257) and (-10.76,-6.92) plMakeFanucCodes : fixed path between (8.1778,-9.7217) and (6.12,-11.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1644.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1644.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1645.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4395,-5.6969) and (-12.02,-4.39) plMakeFanucCodes : fixed path between (-12.0245,-4.3913) and (-12.22,-3.68) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1645.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1645.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1646.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1646.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1646.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1647.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7162,10.4341) and (-5.08,11.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1647.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1647.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1648.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1648.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.6515,6.7122) and (12.10,-2.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1648.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1649.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.1994,11.6527) and (-4.37,11.87) plMakeFanucCodes : fixed path between (12.1740,3.3178) and (12.64,1.74) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1649.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1649.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1650.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.4113,-10.3214) and (6.38,-10.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1650.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1650.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1651.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1651.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1651.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1652.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1652.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1652.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1653.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3078,3.1353) and (-12.69,1.60) plMakeFanucCodes : fixed path between (10.8427,-6.7865) and (11.32,-5.97) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1653.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1653.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1654.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1654.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1654.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.1135,8.6923) and (-12.63,-1.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1655.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1655.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1655.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1656.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.8714,6.4033) and (-11.56,5.02) plMakeFanucCodes : fixed path between (-12.1419,3.9453) and (-12.41,2.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1656.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1656.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1657.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1578,5.5391) and (12.18,2.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1657.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1657.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1658.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1030,7.7448) and (-10.85,6.03) plMakeFanucCodes : fixed path between (-11.3383,5.7252) and (-12.01,4.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1658.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1658.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1659.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1659.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.5838,-9.4516) and (10.79,-1.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.3/plFanuc-1659.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.1345,5.5020) and (0.29,12.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Oct 29 12:05:56 CST 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bba8bc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 18 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1642 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1643 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1644 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1645 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1646 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1647 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1648 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1649 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1650 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1651 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1652 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1653 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1654 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1655 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1656 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1657 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1658 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1659 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Oct 29 12:06:11 CST 2003 Begin running "plateEnder dr2003.11.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.11.3 -morePipes 1" failed. PS: Read file for stderr output of this job.