Sender: LSF System Subject: Job 108637: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Dec 1 10:54:06 2003 Results reported at Mon Dec 1 10:58:00 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_101 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.12.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 178.78 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Dec 1 10:54:07 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Dec 1 10:54:24 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_101/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Mon Dec 1 10:54:24 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_101/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_B4U8gd --------------------------------------------------------------- --------------------------------------------------------------- Mon Dec 1 10:54:24 CST 2003 Begin running plate --------------------------------------------------------------- Mon Dec 1 10:54:24 CST 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bbaadc makePlates : beginning loop over plObs chain; makePlates : making 20 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1172.par makePlates : plateInfo struct for plate 1667 : (h4).mjd 53063 (h4).raCen 199.7192 (h4).decCen 51.5692 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.719 51.569 199.719 53.069 plMakePlateFromTile : mjd of obs : 53063.769492 Observed HA/dec of plate center, fiducial point (deg) : -19.002 51.538 -19.002 53.038 The rotation angle of the fid. point is 136.211768 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1173.par makePlates : plateInfo struct for plate 1668 : (h4).mjd 53063 (h4).raCen 202.6633 (h4).decCen 51.10939 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.663 51.109 202.663 52.609 plMakePlateFromTile : mjd of obs : 53063.769329 Observed HA/dec of plate center, fiducial point (deg) : -22.002 51.079 -22.002 52.579 The rotation angle of the fid. point is 130.201776 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1174.par makePlates : plateInfo struct for plate 1669 : (h4).mjd 53063 (h4).raCen 205.8619 (h4).decCen 50.65265 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.862 50.653 205.862 52.153 plMakePlateFromTile : mjd of obs : 53063.769871 Observed HA/dec of plate center, fiducial point (deg) : -25.002 50.623 -25.002 52.122 The rotation angle of the fid. point is 124.622531 plMakePlateFromTile : beginning loop over 1296 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1175.par makePlates : plateInfo struct for plate 1670 : (h4).mjd 53063 (h4).raCen 208.8819 (h4).decCen 49.92004 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 208.882 49.920 208.882 51.420 plMakePlateFromTile : mjd of obs : 53063.769919 Observed HA/dec of plate center, fiducial point (deg) : -28.002 49.891 -28.001 51.391 The rotation angle of the fid. point is 118.994833 plMakePlateFromTile : beginning loop over 1298 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1176.par makePlates : plateInfo struct for plate 1671 : (h4).mjd 53063 (h4).raCen 211.6903 (h4).decCen 49.33846 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.690 49.338 211.690 50.838 plMakePlateFromTile : mjd of obs : 53063.769382 Observed HA/dec of plate center, fiducial point (deg) : -31.002 49.310 -31.001 50.810 The rotation angle of the fid. point is 114.048490 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1177.par makePlates : plateInfo struct for plate 1672 : (h4).mjd 53063 (h4).raCen 214.309 (h4).decCen 48.6732 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 214.309 48.673 214.309 50.173 plMakePlateFromTile : mjd of obs : 53063.768319 Observed HA/dec of plate center, fiducial point (deg) : -34.002 48.646 -34.001 50.145 The rotation angle of the fid. point is 109.364548 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1178.par makePlates : plateInfo struct for plate 1673 : (h4).mjd 53063 (h4).raCen 216.8777 (h4).decCen 47.83983 (h4).haCen -36 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 216.878 47.840 216.878 49.340 plMakePlateFromTile : mjd of obs : 53063.769890 Observed HA/dec of plate center, fiducial point (deg) : -36.002 47.813 -36.001 49.313 The rotation angle of the fid. point is 105.831863 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1179.par makePlates : plateInfo struct for plate 1674 : (h4).mjd 53063 (h4).raCen 219.2922 (h4).decCen 47.05541 (h4).haCen -39 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 219.292 47.055 219.292 48.555 plMakePlateFromTile : mjd of obs : 53063.768263 Observed HA/dec of plate center, fiducial point (deg) : -39.002 47.030 -39.001 48.530 The rotation angle of the fid. point is 101.616061 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1180.par makePlates : plateInfo struct for plate 1675 : (h4).mjd 53063 (h4).raCen 221.7652 (h4).decCen 46.21826 (h4).haCen -41 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 221.765 46.218 221.765 47.718 plMakePlateFromTile : mjd of obs : 53063.769569 Observed HA/dec of plate center, fiducial point (deg) : -41.002 46.194 -41.001 47.693 The rotation angle of the fid. point is 98.541332 plMakePlateFromTile : beginning loop over 1358 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1181.par makePlates : plateInfo struct for plate 1676 : (h4).mjd 53063 (h4).raCen 224.621 (h4).decCen 45.1211 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 224.621 45.121 224.621 46.621 plMakePlateFromTile : mjd of obs : 53063.810736 Observed HA/dec of plate center, fiducial point (deg) : -29.002 45.097 -29.001 46.596 The rotation angle of the fid. point is 108.756569 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1182.par makePlates : plateInfo struct for plate 1677 : (h4).mjd 53063 (h4).raCen 227.5055 (h4).decCen 43.84976 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 227.506 43.850 227.506 45.350 plMakePlateFromTile : mjd of obs : 53063.810412 Observed HA/dec of plate center, fiducial point (deg) : -32.002 43.827 -32.001 45.326 The rotation angle of the fid. point is 103.003987 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1183.par makePlates : plateInfo struct for plate 1678 : (h4).mjd 53063 (h4).raCen 230.2959 (h4).decCen 42.53017 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 230.296 42.530 230.296 44.030 plMakePlateFromTile : mjd of obs : 53063.809827 Observed HA/dec of plate center, fiducial point (deg) : -35.002 42.508 -35.001 44.008 The rotation angle of the fid. point is 97.790062 plMakePlateFromTile : beginning loop over 1369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1184.par makePlates : plateInfo struct for plate 1679 : (h4).mjd 53063 (h4).raCen 233.0123 (h4).decCen 41.20857 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.012 41.209 233.012 42.709 plMakePlateFromTile : mjd of obs : 53063.850607 Observed HA/dec of plate center, fiducial point (deg) : -23.002 41.187 -23.001 42.686 The rotation angle of the fid. point is 107.250575 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1185.par makePlates : plateInfo struct for plate 1680 : (h4).mjd 53063 (h4).raCen 235.6789 (h4).decCen 39.53427 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 235.679 39.534 235.679 41.034 plMakePlateFromTile : mjd of obs : 53063.852452 Observed HA/dec of plate center, fiducial point (deg) : -25.002 39.514 -25.001 41.014 The rotation angle of the fid. point is 100.671630 plMakePlateFromTile : beginning loop over 1360 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1186.par makePlates : plateInfo struct for plate 1681 : (h4).mjd 53063 (h4).raCen 238.4261 (h4).decCen 37.87194 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 238.426 37.872 238.426 39.372 plMakePlateFromTile : mjd of obs : 53063.851749 Observed HA/dec of plate center, fiducial point (deg) : -28.002 37.853 -28.001 39.353 The rotation angle of the fid. point is 94.034594 plMakePlateFromTile : beginning loop over 1390 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1187.par makePlates : plateInfo struct for plate 1682 : (h4).mjd 53063 (h4).raCen 240.9124 (h4).decCen 36.1182 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 240.912 36.118 240.912 37.618 plMakePlateFromTile : mjd of obs : 53063.853095 Observed HA/dec of plate center, fiducial point (deg) : -30.002 36.101 -30.001 37.601 The rotation angle of the fid. point is 88.821584 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1188.par makePlates : plateInfo struct for plate 1683 : (h4).mjd 53063 (h4).raCen 243.3067 (h4).decCen 34.49056 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.307 34.491 243.307 35.991 plMakePlateFromTile : mjd of obs : 53063.851415 Observed HA/dec of plate center, fiducial point (deg) : -33.002 34.475 -33.001 35.975 The rotation angle of the fid. point is 84.086570 plMakePlateFromTile : beginning loop over 1384 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (65.84, -137.39, 5.6) and (65.30, -137.67, 6.6) checkLTHo : distance = 0.612, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(65.30, -137.67, 6.6) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1189.par makePlates : plateInfo struct for plate 1684 : (h4).mjd 53063 (h4).raCen 245.6249 (h4).decCen 32.5758 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 245.625 32.576 245.625 34.076 plMakePlateFromTile : mjd of obs : 53063.852296 Observed HA/dec of plate center, fiducial point (deg) : -35.002 32.562 -35.001 34.061 The rotation angle of the fid. point is 79.901803 plMakePlateFromTile : beginning loop over 1384 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1190.par makePlates : plateInfo struct for plate 1685 : (h4).mjd 53063 (h4).raCen 247.9013 (h4).decCen 30.74248 (h4).haCen -37 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.901 30.742 247.901 32.242 plMakePlateFromTile : mjd of obs : 53063.853061 Observed HA/dec of plate center, fiducial point (deg) : -37.002 30.730 -37.001 32.230 The rotation angle of the fid. point is 76.386522 plMakePlateFromTile : beginning loop over 1389 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk85/complete//plPlugMapT-1191.par makePlates : plateInfo struct for plate 1686 : (h4).mjd 53063 (h4).raCen 249.9815 (h4).decCen 28.82052 (h4).haCen -39 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 249.982 28.821 249.982 30.321 plMakePlateFromTile : mjd of obs : 53063.853283 Observed HA/dec of plate center, fiducial point (deg) : -39.002 28.810 -39.002 30.309 The rotation angle of the fid. point is 73.194904 plMakePlateFromTile : beginning loop over 1411 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Dec 1 10:55:05 CST 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 20 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1667.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 123 2 7 101 3 9 101 4 15 125 5 12 132 6 9 101 7 8 98 8 5 119 9 3 100 10 9 151 11 7 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 42 24 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 61 10 plFiberPlate : adding spectro-photo std with objId = 3838 41 3 30 51 plFiberPlate : adding spectro-photo std with objId = 3918 41 6 64 37 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 38 55 plFiberPlate : adding spectro-photo std with objId = 3918 41 6 63 55 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 44 62 plFiberPlate : adding spectro-photo std with objId = 3838 41 2 41 9 plFiberPlate : 112 possible sky positions to use as objects from a possible 639. plFiberPlate : 73 possible sky positions to use as objects from a possible 638. plFiberPlate : 53 possible sky positions to use as objects from a possible 637. plFiberPlate : 32 possible sky positions to use as objects from a possible 636. plFiberPlate : 22 possible sky positions to use as objects from a possible 635. plFiberPlate : 22 possible sky positions to use as objects from a possible 634. plFiberPlate : 42 possible sky positions to use as objects from a possible 633. plFiberPlate : 76 possible sky positions to use as objects from a possible 632. plFiberPlate : 44 possible sky positions to use as objects from a possible 631. plFiberPlate : 39 possible sky positions to use as objects from a possible 630. plFiberPlate : 35 possible sky positions to use as objects from a possible 629. plFiberPlate : 13 possible sky positions to use as objects from a possible 628. plFiberPlate : 14 possible sky positions to use as objects from a possible 627. plFiberPlate : 12 possible sky positions to use as objects from a possible 626. plFiberPlate : 17 possible sky positions to use as objects from a possible 625. plFiberPlate : 24 possible sky positions to use as objects from a possible 624. plFiberPlate : 39 possible sky positions to use as objects from a possible 623. plFiberPlate : 34 possible sky positions to use as objects from a possible 622. plFiberPlate : 28 possible sky positions to use as objects from a possible 621. plFiberPlate : 19 possible sky positions to use as objects from a possible 620. plFiberPlate : 9 possible sky positions to use as objects from a possible 619. plFiberPlate : 4 possible sky positions to use as objects from a possible 618. plFiberPlate : 18 possible sky positions to use as objects from a possible 617. plFiberPlate : 24 possible sky positions to use as objects from a possible 616. plFiberPlate : 28 possible sky positions to use as objects from a possible 615. plFiberPlate : 39 possible sky positions to use as objects from a possible 614. plFiberPlate : 25 possible sky positions to use as objects from a possible 613. plFiberPlate : 11 possible sky positions to use as objects from a possible 612. plFiberPlate : 6 possible sky positions to use as objects from a possible 611. plFiberPlate : 18 possible sky positions to use as objects from a possible 610. plFiberPlate : 8 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1667.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1667.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1668.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 109 2 8 92 3 13 86 4 12 100 5 9 132 6 9 106 7 11 94 8 6 107 9 5 109 10 12 149 11 5 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 74 57 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 78 24 plFiberPlate : adding spectro-photo std with objId = 3838 41 3 56 117 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 86 117 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 78 59 plFiberPlate : adding spectro-photo std with objId = 3838 41 1 47 26 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 44 62 plFiberPlate : adding spectro-photo std with objId = 3838 41 2 41 9 plFiberPlate : 116 possible sky positions to use as objects from a possible 606. plFiberPlate : 84 possible sky positions to use as objects from a possible 605. plFiberPlate : 40 possible sky positions to use as objects from a possible 604. plFiberPlate : 39 possible sky positions to use as objects from a possible 603. plFiberPlate : 39 possible sky positions to use as objects from a possible 602. plFiberPlate : 6 possible sky positions to use as objects from a possible 601. plFiberPlate : 44 possible sky positions to use as objects from a possible 600. plFiberPlate : 85 possible sky positions to use as objects from a possible 599. plFiberPlate : 60 possible sky positions to use as objects from a possible 598. plFiberPlate : 39 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 83 possible sky positions to use as objects from a possible 590. plFiberPlate : 57 possible sky positions to use as objects from a possible 589. plFiberPlate : 34 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 27 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 54 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 15 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1667.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1668.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1668.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1669.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 119 2 2 97 3 3 95 4 3 117 5 5 118 6 5 88 7 9 104 8 9 126 9 6 117 10 6 154 11 4 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 90 8 plFiberPlate : adding spectro-photo std with objId = 3838 41 1 61 20 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 58 90 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 86 117 plFiberPlate : adding spectro-photo std with objId = 3918 41 6 91 121 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 98 34 plFiberPlate : adding spectro-photo std with objId = 3918 41 6 86 80 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 90 45 plFiberPlate : 120 possible sky positions to use as objects from a possible 619. plFiberPlate : 67 possible sky positions to use as objects from a possible 618. plFiberPlate : 43 possible sky positions to use as objects from a possible 617. plFiberPlate : 22 possible sky positions to use as objects from a possible 616. plFiberPlate : 35 possible sky positions to use as objects from a possible 615. plFiberPlate : 30 possible sky positions to use as objects from a possible 614. plFiberPlate : 42 possible sky positions to use as objects from a possible 613. plFiberPlate : 86 possible sky positions to use as objects from a possible 612. plFiberPlate : 61 possible sky positions to use as objects from a possible 611. plFiberPlate : 36 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 16 possible sky positions to use as objects from a possible 608. plFiberPlate : 9 possible sky positions to use as objects from a possible 607. plFiberPlate : 21 possible sky positions to use as objects from a possible 606. plFiberPlate : 17 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 78 possible sky positions to use as objects from a possible 603. plFiberPlate : 49 possible sky positions to use as objects from a possible 602. plFiberPlate : 25 possible sky positions to use as objects from a possible 601. plFiberPlate : 16 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 25 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 54 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 12 possible sky positions to use as objects from a possible 591. plFiberPlate : 4 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1668.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1669.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1669.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1670.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 108 2 5 90 3 9 86 4 9 98 5 10 117 6 5 100 7 9 98 8 6 119 9 11 120 10 13 134 11 4 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 106 12 plFiberPlate : adding spectro-photo std with objId = 3838 41 6 79 51 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 110 54 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 85 109 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 98 34 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 84 4 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 70 120 plFiberPlate : adding spectro-photo std with objId = 3838 41 1 75 42 plFiberPlate : 104 possible sky positions to use as objects from a possible 601. plFiberPlate : 67 possible sky positions to use as objects from a possible 600. plFiberPlate : 37 possible sky positions to use as objects from a possible 599. plFiberPlate : 35 possible sky positions to use as objects from a possible 598. plFiberPlate : 20 possible sky positions to use as objects from a possible 597. plFiberPlate : 14 possible sky positions to use as objects from a possible 596. plFiberPlate : 53 possible sky positions to use as objects from a possible 595. plFiberPlate : 63 possible sky positions to use as objects from a possible 594. plFiberPlate : 44 possible sky positions to use as objects from a possible 593. plFiberPlate : 35 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 11 possible sky positions to use as objects from a possible 590. plFiberPlate : 6 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : 23 possible sky positions to use as objects from a possible 586. plFiberPlate : 79 possible sky positions to use as objects from a possible 585. plFiberPlate : 61 possible sky positions to use as objects from a possible 584. plFiberPlate : 44 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 7 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 62 possible sky positions to use as objects from a possible 576. plFiberPlate : 26 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 30 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 19 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1669.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1670.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1670.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1671.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 129 2 6 102 3 7 94 4 12 102 5 6 134 6 6 107 7 6 94 8 4 121 9 7 110 10 11 154 11 8 125 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3838 41 2 87 34 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 124 35 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 90 100 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 84 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 119 57 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 125 137 plFiberPlate : adding spectro-photo std with objId = 3918 41 6 117 12 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 84 43 plFiberPlate : 94 possible sky positions to use as objects from a possible 623. plFiberPlate : 68 possible sky positions to use as objects from a possible 622. plFiberPlate : 44 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 43 possible sky positions to use as objects from a possible 619. plFiberPlate : 42 possible sky positions to use as objects from a possible 618. plFiberPlate : 57 possible sky positions to use as objects from a possible 617. plFiberPlate : 70 possible sky positions to use as objects from a possible 616. plFiberPlate : 65 possible sky positions to use as objects from a possible 615. plFiberPlate : 38 possible sky positions to use as objects from a possible 614. plFiberPlate : 24 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 18 possible sky positions to use as objects from a possible 610. plFiberPlate : 28 possible sky positions to use as objects from a possible 609. plFiberPlate : 26 possible sky positions to use as objects from a possible 608. plFiberPlate : 47 possible sky positions to use as objects from a possible 607. plFiberPlate : 51 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 16 possible sky positions to use as objects from a possible 600. plFiberPlate : 22 possible sky positions to use as objects from a possible 599. plFiberPlate : 85 possible sky positions to use as objects from a possible 598. plFiberPlate : 47 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 6 possible sky positions to use as objects from a possible 595. plFiberPlate : 22 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1670.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1671.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1671.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1672.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 101 2 5 89 3 6 101 4 7 115 5 8 138 6 7 119 7 9 85 8 7 89 9 3 121 10 7 144 11 4 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 135 10 plFiberPlate : adding spectro-photo std with objId = 3838 41 2 109 45 plFiberPlate : adding spectro-photo std with objId = 3838 41 6 99 147 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 130 84 plFiberPlate : adding spectro-photo std with objId = 3838 41 6 105 28 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 138 55 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 125 137 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 104 36 plFiberPlate : 98 possible sky positions to use as objects from a possible 611. plFiberPlate : 52 possible sky positions to use as objects from a possible 610. plFiberPlate : 54 possible sky positions to use as objects from a possible 609. plFiberPlate : 35 possible sky positions to use as objects from a possible 608. plFiberPlate : 24 possible sky positions to use as objects from a possible 607. plFiberPlate : 29 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 69 possible sky positions to use as objects from a possible 604. plFiberPlate : 37 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 8 possible sky positions to use as objects from a possible 599. plFiberPlate : 4 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 68 possible sky positions to use as objects from a possible 595. plFiberPlate : 41 possible sky positions to use as objects from a possible 594. plFiberPlate : 26 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 6 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 5 possible sky positions to use as objects from a possible 588. plFiberPlate : 17 possible sky positions to use as objects from a possible 587. plFiberPlate : 72 possible sky positions to use as objects from a possible 586. plFiberPlate : 51 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 12 possible sky positions to use as objects from a possible 583. plFiberPlate : 16 possible sky positions to use as objects from a possible 582. plFiberPlate : 2 possible sky positions to use as objects from a possible 581. plFiberPlate : 11 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1671.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1672.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1672.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1673.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 121 2 8 109 3 10 94 4 9 95 5 6 118 6 4 97 7 6 103 8 9 112 9 6 118 10 15 148 11 8 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 152 60 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 116 174 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 118 88 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 143 86 plFiberPlate : adding spectro-photo std with objId = 3838 41 3 115 61 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 144 96 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 138 55 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 104 36 plFiberPlate : 79 possible sky positions to use as objects from a possible 608. plFiberPlate : 69 possible sky positions to use as objects from a possible 607. plFiberPlate : 32 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 48 possible sky positions to use as objects from a possible 604. plFiberPlate : 25 possible sky positions to use as objects from a possible 603. plFiberPlate : 41 possible sky positions to use as objects from a possible 602. plFiberPlate : 69 possible sky positions to use as objects from a possible 601. plFiberPlate : 45 possible sky positions to use as objects from a possible 600. plFiberPlate : 29 possible sky positions to use as objects from a possible 599. plFiberPlate : 9 possible sky positions to use as objects from a possible 598. plFiberPlate : 5 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 22 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 18 possible sky positions to use as objects from a possible 593. plFiberPlate : 47 possible sky positions to use as objects from a possible 592. plFiberPlate : 44 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : 25 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 24 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 24 possible sky positions to use as objects from a possible 583. plFiberPlate : 37 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 17 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 31 possible sky positions to use as objects from a possible 578. plFiberPlate : 22 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1672.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1673.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1673.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1674.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 130 2 6 106 3 10 87 4 11 104 5 12 121 6 7 95 7 9 79 8 7 101 9 4 104 10 14 141 11 9 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 157 26 plFiberPlate : adding spectro-photo std with objId = 3838 41 3 135 59 plFiberPlate : adding spectro-photo std with objId = 3838 41 1 124 75 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 156 7 plFiberPlate : adding spectro-photo std with objId = 3838 41 4 118 88 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 160 149 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 133 19 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 154 50 plFiberPlate : 111 possible sky positions to use as objects from a possible 599. plFiberPlate : 72 possible sky positions to use as objects from a possible 598. plFiberPlate : 37 possible sky positions to use as objects from a possible 597. plFiberPlate : 26 possible sky positions to use as objects from a possible 596. plFiberPlate : 40 possible sky positions to use as objects from a possible 595. plFiberPlate : 38 possible sky positions to use as objects from a possible 594. plFiberPlate : 54 possible sky positions to use as objects from a possible 593. plFiberPlate : 67 possible sky positions to use as objects from a possible 592. plFiberPlate : 43 possible sky positions to use as objects from a possible 591. plFiberPlate : 36 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 9 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 32 possible sky positions to use as objects from a possible 584. plFiberPlate : 72 possible sky positions to use as objects from a possible 583. plFiberPlate : 41 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 7 possible sky positions to use as objects from a possible 578. plFiberPlate : 19 possible sky positions to use as objects from a possible 577. plFiberPlate : 9 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 74 possible sky positions to use as objects from a possible 574. plFiberPlate : 46 possible sky positions to use as objects from a possible 573. plFiberPlate : 21 possible sky positions to use as objects from a possible 572. plFiberPlate : 2 possible sky positions to use as objects from a possible 571. plFiberPlate : 13 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1673.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1674.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1674.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1675.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 123 2 5 103 3 6 111 4 7 120 5 11 129 6 9 97 7 10 85 8 13 98 9 8 105 10 13 154 11 10 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 167 9 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 72 30 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 165 46 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 178 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 160 149 plFiberPlate : adding spectro-photo std with objId = 3838 41 6 133 140 plFiberPlate : adding spectro-photo std with objId = 3838 41 5 133 19 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 70 45 plFiberPlate : 80 possible sky positions to use as objects from a possible 625. plFiberPlate : 90 possible sky positions to use as objects from a possible 624. plFiberPlate : 28 possible sky positions to use as objects from a possible 623. plFiberPlate : 35 possible sky positions to use as objects from a possible 622. plFiberPlate : 16 possible sky positions to use as objects from a possible 621. plFiberPlate : 44 possible sky positions to use as objects from a possible 620. plFiberPlate : 36 possible sky positions to use as objects from a possible 619. plFiberPlate : 78 possible sky positions to use as objects from a possible 618. plFiberPlate : 42 possible sky positions to use as objects from a possible 617. plFiberPlate : 26 possible sky positions to use as objects from a possible 616. plFiberPlate : 12 possible sky positions to use as objects from a possible 615. plFiberPlate : 2 possible sky positions to use as objects from a possible 614. plFiberPlate : 4 possible sky positions to use as objects from a possible 613. plFiberPlate : 9 possible sky positions to use as objects from a possible 612. plFiberPlate : 19 possible sky positions to use as objects from a possible 611. plFiberPlate : 40 possible sky positions to use as objects from a possible 610. plFiberPlate : 57 possible sky positions to use as objects from a possible 609. plFiberPlate : 50 possible sky positions to use as objects from a possible 608. plFiberPlate : 33 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 6 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 3 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 13 possible sky positions to use as objects from a possible 601. plFiberPlate : 56 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 19 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 19 possible sky positions to use as objects from a possible 596. plFiberPlate : 7 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1674.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1675.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1675.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1676.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 103 2 8 86 3 8 104 4 8 105 5 12 123 6 9 99 7 9 97 8 9 120 9 7 106 10 11 154 11 9 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 181 104 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 188 151 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 81 147 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 188 14 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 181 114 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 92 70 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 189 117 plFiberPlate : adding spectro-photo std with objId = 3964 41 6 85 66 plFiberPlate : 112 possible sky positions to use as objects from a possible 594. plFiberPlate : 48 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 27 possible sky positions to use as objects from a possible 590. plFiberPlate : 15 possible sky positions to use as objects from a possible 589. plFiberPlate : 36 possible sky positions to use as objects from a possible 588. plFiberPlate : 67 possible sky positions to use as objects from a possible 587. plFiberPlate : 53 possible sky positions to use as objects from a possible 586. plFiberPlate : 35 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 17 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 73 possible sky positions to use as objects from a possible 578. plFiberPlate : 46 possible sky positions to use as objects from a possible 577. plFiberPlate : 24 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 11 possible sky positions to use as objects from a possible 574. plFiberPlate : 8 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 52 possible sky positions to use as objects from a possible 569. plFiberPlate : 67 possible sky positions to use as objects from a possible 568. plFiberPlate : 28 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 22 possible sky positions to use as objects from a possible 564. plFiberPlate : 28 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1675.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1676.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1676.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1677.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 107 2 12 78 3 7 87 4 9 106 5 15 118 6 8 95 7 10 100 8 11 115 9 10 115 10 17 137 11 9 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 203 92 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 209 13 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 109 30 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 201 25 plFiberPlate : adding spectro-photo std with objId = 3964 41 6 97 75 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 207 18 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 92 70 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 107 183 plFiberPlate : 114 possible sky positions to use as objects from a possible 584. plFiberPlate : 36 possible sky positions to use as objects from a possible 583. plFiberPlate : 17 possible sky positions to use as objects from a possible 582. plFiberPlate : 33 possible sky positions to use as objects from a possible 581. plFiberPlate : 23 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 39 possible sky positions to use as objects from a possible 578. plFiberPlate : 71 possible sky positions to use as objects from a possible 577. plFiberPlate : 54 possible sky positions to use as objects from a possible 576. plFiberPlate : 35 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 7 possible sky positions to use as objects from a possible 570. plFiberPlate : 25 possible sky positions to use as objects from a possible 569. plFiberPlate : 60 possible sky positions to use as objects from a possible 568. plFiberPlate : 41 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 12 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 1 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 3 possible sky positions to use as objects from a possible 560. plFiberPlate : 72 possible sky positions to use as objects from a possible 559. plFiberPlate : 72 possible sky positions to use as objects from a possible 558. plFiberPlate : 35 possible sky positions to use as objects from a possible 557. plFiberPlate : 15 possible sky positions to use as objects from a possible 556. plFiberPlate : 12 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 27 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1676.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1677.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1677.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1678.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 122 2 9 91 3 9 100 4 11 108 5 6 119 6 12 89 7 14 103 8 13 115 9 13 124 10 20 155 11 16 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 123 64 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 224 17 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 116 65 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 533 55 plFiberPlate : adding spectro-photo std with objId = 3964 41 6 111 33 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 115 149 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 114 87 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 107 183 plFiberPlate : 119 possible sky positions to use as objects from a possible 612. plFiberPlate : 44 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 25 possible sky positions to use as objects from a possible 609. plFiberPlate : 21 possible sky positions to use as objects from a possible 608. plFiberPlate : 36 possible sky positions to use as objects from a possible 607. plFiberPlate : 32 possible sky positions to use as objects from a possible 606. plFiberPlate : 63 possible sky positions to use as objects from a possible 605. plFiberPlate : 59 possible sky positions to use as objects from a possible 604. plFiberPlate : 44 possible sky positions to use as objects from a possible 603. plFiberPlate : 21 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 14 possible sky positions to use as objects from a possible 598. plFiberPlate : 21 possible sky positions to use as objects from a possible 597. plFiberPlate : 77 possible sky positions to use as objects from a possible 596. plFiberPlate : 60 possible sky positions to use as objects from a possible 595. plFiberPlate : 47 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 16 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 66 possible sky positions to use as objects from a possible 587. plFiberPlate : 47 possible sky positions to use as objects from a possible 586. plFiberPlate : 20 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 49 possible sky positions to use as objects from a possible 581. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1677.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1678.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1678.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1679.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 110 2 16 81 3 10 98 4 12 123 5 18 120 6 14 90 7 20 89 8 19 107 9 20 103 10 17 147 11 16 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 2 124 43 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 225 80 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 129 81 plFiberPlate : adding spectro-photo std with objId = 3964 41 6 132 43 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 139 96 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 240 44 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 235 52 plFiberPlate : adding spectro-photo std with objId = 3964 41 2 133 34 plFiberPlate : 120 possible sky positions to use as objects from a possible 587. plFiberPlate : 54 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 42 possible sky positions to use as objects from a possible 581. plFiberPlate : 77 possible sky positions to use as objects from a possible 580. plFiberPlate : 41 possible sky positions to use as objects from a possible 579. plFiberPlate : 32 possible sky positions to use as objects from a possible 578. plFiberPlate : 23 possible sky positions to use as objects from a possible 577. plFiberPlate : 7 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : 10 possible sky positions to use as objects from a possible 574. plFiberPlate : 5 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 61 possible sky positions to use as objects from a possible 571. plFiberPlate : 43 possible sky positions to use as objects from a possible 570. plFiberPlate : 30 possible sky positions to use as objects from a possible 569. plFiberPlate : 23 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 6 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 52 possible sky positions to use as objects from a possible 562. plFiberPlate : 61 possible sky positions to use as objects from a possible 561. plFiberPlate : 44 possible sky positions to use as objects from a possible 560. plFiberPlate : 27 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 17 possible sky positions to use as objects from a possible 557. plFiberPlate : 58 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1678.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1679.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1679.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1680.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 104 2 15 93 3 6 98 4 10 106 5 15 113 6 10 93 7 14 97 8 20 116 9 11 89 10 14 148 11 13 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 144 45 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 241 45 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 158 64 plFiberPlate : adding spectro-photo std with objId = 3964 41 2 146 29 plFiberPlate : adding spectro-photo std with objId = 3964 41 6 153 46 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 155 14 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 148 72 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 260 74 plFiberPlate : 128 possible sky positions to use as objects from a possible 586. plFiberPlate : 27 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 22 possible sky positions to use as objects from a possible 583. plFiberPlate : 28 possible sky positions to use as objects from a possible 582. plFiberPlate : 22 possible sky positions to use as objects from a possible 581. plFiberPlate : 20 possible sky positions to use as objects from a possible 580. plFiberPlate : 53 possible sky positions to use as objects from a possible 579. plFiberPlate : 30 possible sky positions to use as objects from a possible 578. plFiberPlate : 30 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 5 possible sky positions to use as objects from a possible 575. plFiberPlate : 6 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 12 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 65 possible sky positions to use as objects from a possible 570. plFiberPlate : 49 possible sky positions to use as objects from a possible 569. plFiberPlate : 49 possible sky positions to use as objects from a possible 568. plFiberPlate : 36 possible sky positions to use as objects from a possible 567. plFiberPlate : 13 possible sky positions to use as objects from a possible 566. plFiberPlate : 7 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 27 possible sky positions to use as objects from a possible 563. plFiberPlate : 34 possible sky positions to use as objects from a possible 562. plFiberPlate : 54 possible sky positions to use as objects from a possible 561. plFiberPlate : 45 possible sky positions to use as objects from a possible 560. plFiberPlate : 27 possible sky positions to use as objects from a possible 559. plFiberPlate : 13 possible sky positions to use as objects from a possible 558. plFiberPlate : 7 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : 36 possible sky positions to use as objects from a possible 555. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1679.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1680.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1680.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1681.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 109 2 10 95 3 7 97 4 14 110 5 11 118 6 13 103 7 19 106 8 17 122 9 14 122 10 13 161 11 13 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 274 107 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 278 91 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 162 156 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 269 24 plFiberPlate : adding spectro-photo std with objId = 3918 41 1 264 103 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 260 74 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 270 6 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 274 226 plFiberPlate : 84 possible sky positions to use as objects from a possible 622. plFiberPlate : 38 possible sky positions to use as objects from a possible 621. plFiberPlate : 17 possible sky positions to use as objects from a possible 620. plFiberPlate : 29 possible sky positions to use as objects from a possible 619. plFiberPlate : 24 possible sky positions to use as objects from a possible 618. plFiberPlate : 28 possible sky positions to use as objects from a possible 617. plFiberPlate : 42 possible sky positions to use as objects from a possible 616. plFiberPlate : 57 possible sky positions to use as objects from a possible 615. plFiberPlate : 56 possible sky positions to use as objects from a possible 614. plFiberPlate : 32 possible sky positions to use as objects from a possible 613. plFiberPlate : 28 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 6 possible sky positions to use as objects from a possible 609. plFiberPlate : 13 possible sky positions to use as objects from a possible 608. plFiberPlate : 5 possible sky positions to use as objects from a possible 607. plFiberPlate : 55 possible sky positions to use as objects from a possible 606. plFiberPlate : 45 possible sky positions to use as objects from a possible 605. plFiberPlate : 37 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 16 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 19 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 23 possible sky positions to use as objects from a possible 598. plFiberPlate : 67 possible sky positions to use as objects from a possible 597. plFiberPlate : 51 possible sky positions to use as objects from a possible 596. plFiberPlate : 37 possible sky positions to use as objects from a possible 595. plFiberPlate : 24 possible sky positions to use as objects from a possible 594. plFiberPlate : 23 possible sky positions to use as objects from a possible 593. plFiberPlate : 8 possible sky positions to use as objects from a possible 592. plFiberPlate : 80 possible sky positions to use as objects from a possible 591. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1680.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1681.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1681.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1682.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 126 2 12 112 3 12 100 4 13 133 5 15 106 6 13 86 7 15 94 8 22 108 9 12 92 10 23 160 11 18 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 2 181 72 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 195 47 plFiberPlate : adding spectro-photo std with objId = 3964 41 6 185 8 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 282 112 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 191 73 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 183 20 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 185 50 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 282 158 plFiberPlate : 150 possible sky positions to use as objects from a possible 608. plFiberPlate : 35 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 18 possible sky positions to use as objects from a possible 605. plFiberPlate : 24 possible sky positions to use as objects from a possible 604. plFiberPlate : 51 possible sky positions to use as objects from a possible 603. plFiberPlate : 36 possible sky positions to use as objects from a possible 602. plFiberPlate : 76 possible sky positions to use as objects from a possible 601. plFiberPlate : 64 possible sky positions to use as objects from a possible 600. plFiberPlate : 43 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 19 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 15 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 31 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 22 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 8 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : 6 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 49 possible sky positions to use as objects from a possible 583. plFiberPlate : 39 possible sky positions to use as objects from a possible 582. plFiberPlate : 32 possible sky positions to use as objects from a possible 581. plFiberPlate : 19 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 4 possible sky positions to use as objects from a possible 578. plFiberPlate : 41 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1681.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1682.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1682.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1683.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 92 2 21 80 3 17 89 4 21 100 5 18 113 6 14 99 7 17 98 8 26 102 9 19 104 10 38 121 11 25 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 195 47 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 297 161 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 305 38 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 211 28 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 210 75 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 297 150 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 310 219 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 302 10 plFiberPlate : 96 possible sky positions to use as objects from a possible 555. plFiberPlate : 45 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 21 possible sky positions to use as objects from a possible 552. plFiberPlate : 18 possible sky positions to use as objects from a possible 551. plFiberPlate : 15 possible sky positions to use as objects from a possible 550. plFiberPlate : 32 possible sky positions to use as objects from a possible 549. plFiberPlate : 57 possible sky positions to use as objects from a possible 548. plFiberPlate : 32 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 11 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 43 possible sky positions to use as objects from a possible 539. plFiberPlate : 26 possible sky positions to use as objects from a possible 538. plFiberPlate : 24 possible sky positions to use as objects from a possible 537. plFiberPlate : 17 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 5 possible sky positions to use as objects from a possible 533. plFiberPlate : 2 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 66 possible sky positions to use as objects from a possible 530. plFiberPlate : 44 possible sky positions to use as objects from a possible 529. plFiberPlate : 43 possible sky positions to use as objects from a possible 528. plFiberPlate : 28 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 52 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1682.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1683.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1683.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1684.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 106 2 17 89 3 17 96 4 29 104 5 10 105 6 10 91 7 18 90 8 24 113 9 14 103 10 26 132 11 14 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 329 174 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 223 60 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 222 216 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 330 45 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 318 33 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 216 101 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 322 14 plFiberPlate : adding spectro-photo std with objId = 3918 41 4 322 6 plFiberPlate : 131 possible sky positions to use as objects from a possible 565. plFiberPlate : 50 possible sky positions to use as objects from a possible 564. plFiberPlate : 19 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 27 possible sky positions to use as objects from a possible 560. plFiberPlate : 44 possible sky positions to use as objects from a possible 559. plFiberPlate : 56 possible sky positions to use as objects from a possible 558. plFiberPlate : 26 possible sky positions to use as objects from a possible 557. plFiberPlate : 18 possible sky positions to use as objects from a possible 556. plFiberPlate : 8 possible sky positions to use as objects from a possible 555. plFiberPlate : 6 possible sky positions to use as objects from a possible 554. plFiberPlate : 5 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 13 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 27 possible sky positions to use as objects from a possible 549. plFiberPlate : 44 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 19 possible sky positions to use as objects from a possible 545. plFiberPlate : 9 possible sky positions to use as objects from a possible 544. plFiberPlate : 9 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 21 possible sky positions to use as objects from a possible 541. plFiberPlate : 63 possible sky positions to use as objects from a possible 540. plFiberPlate : 47 possible sky positions to use as objects from a possible 539. plFiberPlate : 28 possible sky positions to use as objects from a possible 538. plFiberPlate : 20 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 50 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1683.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1684.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1684.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1685.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 92 2 17 84 3 13 101 4 15 105 5 20 102 6 14 85 7 26 100 8 34 122 9 14 91 10 30 144 11 22 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 231 48 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 349 99 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 331 130 plFiberPlate : adding spectro-photo std with objId = 3964 41 3 242 212 plFiberPlate : adding spectro-photo std with objId = 3964 41 2 237 163 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 344 289 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 345 193 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 334 148 plFiberPlate : 137 possible sky positions to use as objects from a possible 560. plFiberPlate : 28 possible sky positions to use as objects from a possible 559. plFiberPlate : 24 possible sky positions to use as objects from a possible 558. plFiberPlate : 12 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 30 possible sky positions to use as objects from a possible 554. plFiberPlate : 77 possible sky positions to use as objects from a possible 553. plFiberPlate : 38 possible sky positions to use as objects from a possible 552. plFiberPlate : 25 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 14 possible sky positions to use as objects from a possible 549. plFiberPlate : 16 possible sky positions to use as objects from a possible 548. plFiberPlate : 6 possible sky positions to use as objects from a possible 547. plFiberPlate : 8 possible sky positions to use as objects from a possible 546. plFiberPlate : 25 possible sky positions to use as objects from a possible 545. plFiberPlate : 50 possible sky positions to use as objects from a possible 544. plFiberPlate : 37 possible sky positions to use as objects from a possible 543. plFiberPlate : 26 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 9 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 5 possible sky positions to use as objects from a possible 538. plFiberPlate : 13 possible sky positions to use as objects from a possible 537. plFiberPlate : 30 possible sky positions to use as objects from a possible 536. plFiberPlate : 52 possible sky positions to use as objects from a possible 535. plFiberPlate : 37 possible sky positions to use as objects from a possible 534. plFiberPlate : 30 possible sky positions to use as objects from a possible 533. plFiberPlate : 25 possible sky positions to use as objects from a possible 532. plFiberPlate : 10 possible sky positions to use as objects from a possible 531. plFiberPlate : 22 possible sky positions to use as objects from a possible 530. plFiberPlate : 68 possible sky positions to use as objects from a possible 529. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1684.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1685.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1685.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.12.1/plPlugMapP-1686.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 114 2 13 93 3 21 103 4 25 115 5 22 101 6 24 86 7 28 114 8 32 133 9 29 95 10 24 136 11 8 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 352 32 plFiberPlate : adding spectro-photo std with objId = 3964 41 4 261 98 plFiberPlate : adding spectro-photo std with objId = 3918 41 3 350 184 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 361 198 plFiberPlate : adding spectro-photo std with objId = 3964 41 5 259 25 plFiberPlate : adding spectro-photo std with objId = 3918 41 2 352 112 plFiberPlate : adding spectro-photo std with objId = 3958 40 5 140 50 plFiberPlate : adding spectro-photo std with objId = 3918 41 5 365 197 plFiberPlate : 33 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 19 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 13 possible sky positions to use as objects from a possible 596. plFiberPlate : 19 possible sky positions to use as objects from a possible 595. plFiberPlate : 27 possible sky positions to use as objects from a possible 594. plFiberPlate : 34 possible sky positions to use as objects from a possible 593. plFiberPlate : 19 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 8 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 9 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 45 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 5 possible sky positions to use as objects from a possible 578. plFiberPlate : 8 possible sky positions to use as objects from a possible 577. plFiberPlate : 23 possible sky positions to use as objects from a possible 576. plFiberPlate : 43 possible sky positions to use as objects from a possible 575. plFiberPlate : 32 possible sky positions to use as objects from a possible 574. plFiberPlate : 25 possible sky positions to use as objects from a possible 573. plFiberPlate : 14 possible sky positions to use as objects from a possible 572. plFiberPlate : 7 possible sky positions to use as objects from a possible 571. plFiberPlate : 5 possible sky positions to use as objects from a possible 570. plFiberPlate : 69 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1685.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1686.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.12.1/plOverlay-1686.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Dec 1 10:55:51 CST 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 20 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1667.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7636,4.7673) and (12.43,2.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1667.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1667.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1668.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1668.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1668.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1669.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.8261,11.2657) and (-4.88,11.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1669.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1669.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1670.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.2032,-3.7226) and (12.38,-2.25) plMakeFanucCodes : fixed path between (3.8539,11.0742) and (1.56,12.70) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1670.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1670.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1671.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1671.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1671.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1672.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.8635,-10.0086) and (6.84,-10.70) plMakeFanucCodes : fixed path between (6.8394,-10.7039) and (5.19,-11.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1672.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1672.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1673.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.5508,8.4399) and (11.19,6.21) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1673.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1673.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1674.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.3532,4.0019) and (-12.68,1.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1674.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1674.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1675.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1675.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1675.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1676.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1676.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1676.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.4983,8.1430) and (3.15,12.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1677.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (2.2213,-12.5618) and (0.44,-12.76) plMakeFanucCodes : fixed path between (-4.6029,11.7495) and (-2.73,12.21) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1677.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1677.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1678.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1678.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1678.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1679.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.8088,9.9700) and (4.27,11.97) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1679.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1679.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1680.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.9038,-11.8417) and (2.50,-12.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1680.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1680.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1681.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.1354,-10.5689) and (6.19,-11.18) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1681.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1681.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1682.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0452,4.0760) and (-12.46,2.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1682.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1682.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1683.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1683.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1683.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1684.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.3461,-11.4578) and (4.35,-12.00) plMakeFanucCodes : fixed path between (-10.8593,-6.5077) and (-11.59,-3.67) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1684.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1684.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1685.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.4371,10.8685) and (-4.30,11.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1685.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1685.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1686.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1686.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.12.1/plFanuc-1686.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Dec 1 10:56:52 CST 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8b77b64 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 20 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1667 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1668 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1669 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1670 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1671 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1672 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1673 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1674 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1675 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1676 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1677 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1678 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1679 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1680 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1681 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1682 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1683 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1684 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1685 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1686 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Dec 1 10:57:10 CST 2003 Begin running "plateEnder dr2003.12.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.12.1 -morePipes 1" failed. PS: Read file for stderr output of this job.