Sender: LSF System Subject: Job 50468: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Jun 16 14:37:28 2005 Results reported at Thu Jun 16 14:40:16 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.06.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 103.68 sec. Max Memory : 11 MB Max Swap : 28 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Thu Jun 16 14:37:40 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Jun 16 14:38:11 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_246/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Thu Jun 16 14:38:11 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_246/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Thu Jun 16 14:38:12 CDT 2005 Begin running plate --------------------------------------------------------------- Thu Jun 16 14:38:13 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x943eddc makePlates : beginning loop over plObs chain; makePlates : making 9 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8068.par makePlates : plateInfo struct for plate 2247 : (h4).mjd 53558 (h4).raCen 258.7838 (h4).decCen 42.03 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 258.784 42.030 258.784 43.530 plMakePlateFromTile : mjd of obs : 53558.631469 Observed HA/dec of plate center, fiducial point (deg) : -0.002 42.021 -0.001 43.521 The rotation angle of the fid. point is 179.952900 plMakePlateFromTile : beginning loop over 1618 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8069.par makePlates : plateInfo struct for plate 2248 : (h4).mjd 53558 (h4).raCen 306.438 (h4).decCen 13.6697 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 306.438 13.670 306.438 15.170 plMakePlateFromTile : mjd of obs : 53558.763532 Observed HA/dec of plate center, fiducial point (deg) : -0.002 13.691 -0.002 15.191 The rotation angle of the fid. point is -0.018766 plMakePlateFromTile : beginning loop over 1658 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8070.par makePlates : plateInfo struct for plate 2249 : (h4).mjd 53558 (h4).raCen 309.3312 (h4).decCen 14.7344 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 309.331 14.734 309.331 16.234 plMakePlateFromTile : mjd of obs : 53558.771545 Observed HA/dec of plate center, fiducial point (deg) : -0.002 14.757 -0.002 16.256 The rotation angle of the fid. point is -0.017582 plMakePlateFromTile : beginning loop over 1676 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8071.par makePlates : plateInfo struct for plate 2250 : (h4).mjd 53558 (h4).raCen 312.2523 (h4).decCen 15.7627 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 312.252 15.763 312.252 17.263 plMakePlateFromTile : mjd of obs : 53558.779636 Observed HA/dec of plate center, fiducial point (deg) : -0.002 15.786 -0.002 17.286 The rotation angle of the fid. point is -0.016301 plMakePlateFromTile : beginning loop over 1568 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8072.par makePlates : plateInfo struct for plate 2251 : (h4).mjd 53558 (h4).raCen 332.501 (h4).decCen 21.47 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.501 21.470 332.501 22.970 plMakePlateFromTile : mjd of obs : 53558.835727 Observed HA/dec of plate center, fiducial point (deg) : -0.002 21.498 -0.002 22.997 The rotation angle of the fid. point is -0.005096 plMakePlateFromTile : beginning loop over 1778 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8073.par makePlates : plateInfo struct for plate 2252 : (h4).mjd 53558 (h4).raCen 340.973 (h4).decCen 23.07 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 340.973 23.070 340.973 24.570 plMakePlateFromTile : mjd of obs : 53558.859198 Observed HA/dec of plate center, fiducial point (deg) : -0.002 23.099 -0.002 24.599 The rotation angle of the fid. point is 0.000567 plMakePlateFromTile : beginning loop over 1722 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8074.par makePlates : plateInfo struct for plate 2253 : (h4).mjd 53558 (h4).raCen 263.1097 (h4).decCen 33.1635 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 263.110 33.163 263.110 34.664 plMakePlateFromTile : mjd of obs : 53558.643470 Observed HA/dec of plate center, fiducial point (deg) : -0.002 33.159 -0.001 34.659 The rotation angle of the fid. point is 179.661018 plMakePlateFromTile : beginning loop over 1543 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8075.par makePlates : plateInfo struct for plate 2254 : (h4).mjd 53558 (h4).raCen 249.05311 (h4).decCen -6.27339 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 249.053 -6.273 249.053 -4.773 plMakePlateFromTile : mjd of obs : 53558.604588 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -6.273 -0.002 -4.774 The rotation angle of the fid. point is -0.024839 plMakePlateFromTile : beginning loop over 1955 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapT-8076.par makePlates : plateInfo struct for plate 2255 : (h4).mjd 53558 (h4).raCen 250.007 (h4).decCen 36.197 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.007 36.197 250.007 37.697 plMakePlateFromTile : mjd of obs : 53558.607169 Observed HA/dec of plate center, fiducial point (deg) : -0.002 36.186 -0.001 37.686 The rotation angle of the fid. point is 179.935189 plMakePlateFromTile : beginning loop over 1758 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Jun 16 14:38:44 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 9 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2247.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 612 to list of science objects plFiberPlate : adding sky number 287 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 154 2 19 132 3 27 130 4 31 145 5 35 157 6 19 108 7 11 82 8 15 81 9 18 149 10 34 229 11 17 168 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5327 40 5 11 205 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 215 109 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 215 16 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 211 164 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 209 55 plFiberPlate : adding spectro-photo std with objId = 4682 40 3 207 153 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 207 161 plFiberPlate : adding spectro-photo std with objId = 4682 40 5 206 98 plFiberPlate : 186 possible sky positions to use as objects from a possible 727. plFiberPlate : 130 possible sky positions to use as objects from a possible 726. plFiberPlate : 85 possible sky positions to use as objects from a possible 725. plFiberPlate : 41 possible sky positions to use as objects from a possible 724. plFiberPlate : 49 possible sky positions to use as objects from a possible 723. plFiberPlate : 27 possible sky positions to use as objects from a possible 722. plFiberPlate : 76 possible sky positions to use as objects from a possible 721. plFiberPlate : 131 possible sky positions to use as objects from a possible 720. plFiberPlate : 83 possible sky positions to use as objects from a possible 719. plFiberPlate : 72 possible sky positions to use as objects from a possible 718. plFiberPlate : 55 possible sky positions to use as objects from a possible 717. plFiberPlate : 25 possible sky positions to use as objects from a possible 716. plFiberPlate : 24 possible sky positions to use as objects from a possible 715. plFiberPlate : 24 possible sky positions to use as objects from a possible 714. plFiberPlate : 43 possible sky positions to use as objects from a possible 713. plFiberPlate : 15 possible sky positions to use as objects from a possible 712. plFiberPlate : 76 possible sky positions to use as objects from a possible 711. plFiberPlate : 72 possible sky positions to use as objects from a possible 710. plFiberPlate : 40 possible sky positions to use as objects from a possible 709. plFiberPlate : 27 possible sky positions to use as objects from a possible 708. plFiberPlate : 10 possible sky positions to use as objects from a possible 707. plFiberPlate : 0 possible sky positions to use as objects from a possible 706. plFiberPlate: No sky found for bundle at 74.768 191.025, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 706. plFiberPlate : 5 possible sky positions to use as objects from a possible 705. plFiberPlate : 3 possible sky positions to use as objects from a possible 704. plFiberPlate : 25 possible sky positions to use as objects from a possible 703. plFiberPlate : 24 possible sky positions to use as objects from a possible 702. plFiberPlate : 1 possible sky positions to use as objects from a possible 701. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 700. plFiberPlate: No sky found for bundle at 58.401 266.506, increase box by 100 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 700. plFiberPlate : 1 possible sky positions to use as objects from a possible 699. plFiberPlate : 0 possible sky positions to use as objects from a possible 698. plFiberPlate: No sky found for bundle at 88.594 262.739, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 698. plFiberPlate : 0 possible sky positions to use as objects from a possible 697. plFiberPlate: No sky found for bundle at 101.019 262.361, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 697. plFiberPlate: No sky found for bundle at 101.019 262.361, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 697. plFiberPlate: No sky found for bundle at 101.019 262.361, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 697. plFiberPlate: No sky found for bundle at 101.019 262.361, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 697. plFiberPlate: No sky found for bundle at 101.019 262.361, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 697. plFiberPlate : 2 possible sky positions to use as objects from a possible 696. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 744 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2247.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2247.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2248.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 117 2 25 91 3 19 82 4 15 99 5 29 121 6 17 94 7 12 83 8 18 103 9 19 116 10 34 147 11 33 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 18 1607 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 16 1659 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 16 1292 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 16 102 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 13 563 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 13 491 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 13 1481 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 12 1362 plFiberPlate : 91 possible sky positions to use as objects from a possible 584. plFiberPlate : 93 possible sky positions to use as objects from a possible 583. plFiberPlate : 63 possible sky positions to use as objects from a possible 582. plFiberPlate : 30 possible sky positions to use as objects from a possible 581. plFiberPlate : 39 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 63 possible sky positions to use as objects from a possible 578. plFiberPlate : 60 possible sky positions to use as objects from a possible 577. plFiberPlate : 62 possible sky positions to use as objects from a possible 576. plFiberPlate : 55 possible sky positions to use as objects from a possible 575. plFiberPlate : 35 possible sky positions to use as objects from a possible 574. plFiberPlate : 20 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 17 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 66 possible sky positions to use as objects from a possible 568. plFiberPlate : 64 possible sky positions to use as objects from a possible 567. plFiberPlate : 40 possible sky positions to use as objects from a possible 566. plFiberPlate : 28 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 14 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 8 possible sky positions to use as objects from a possible 561. plFiberPlate : 26 possible sky positions to use as objects from a possible 560. plFiberPlate : 45 possible sky positions to use as objects from a possible 559. plFiberPlate : 25 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 11 possible sky positions to use as objects from a possible 556. plFiberPlate : 8 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 7 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 849 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2247.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2248.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2248.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2249.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 126 2 17 99 3 16 89 4 13 112 5 19 118 6 14 98 7 6 98 8 8 112 9 10 122 10 34 164 11 26 124 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 43 1416 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 39 933 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 38 440 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 36 962 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 36 779 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 36 1136 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 36 371 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 35 933 plFiberPlate : 105 possible sky positions to use as objects from a possible 620. plFiberPlate : 95 possible sky positions to use as objects from a possible 619. plFiberPlate : 72 possible sky positions to use as objects from a possible 618. plFiberPlate : 35 possible sky positions to use as objects from a possible 617. plFiberPlate : 21 possible sky positions to use as objects from a possible 616. plFiberPlate : 42 possible sky positions to use as objects from a possible 615. plFiberPlate : 60 possible sky positions to use as objects from a possible 614. plFiberPlate : 93 possible sky positions to use as objects from a possible 613. plFiberPlate : 66 possible sky positions to use as objects from a possible 612. plFiberPlate : 36 possible sky positions to use as objects from a possible 611. plFiberPlate : 35 possible sky positions to use as objects from a possible 610. plFiberPlate : 14 possible sky positions to use as objects from a possible 609. plFiberPlate : 10 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 25 possible sky positions to use as objects from a possible 605. plFiberPlate : 60 possible sky positions to use as objects from a possible 604. plFiberPlate : 57 possible sky positions to use as objects from a possible 603. plFiberPlate : 34 possible sky positions to use as objects from a possible 602. plFiberPlate : 33 possible sky positions to use as objects from a possible 601. plFiberPlate : 19 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 18 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 39 possible sky positions to use as objects from a possible 595. plFiberPlate : 29 possible sky positions to use as objects from a possible 594. plFiberPlate : 21 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 18 possible sky positions to use as objects from a possible 591. plFiberPlate : 24 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 905 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2248.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2249.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2249.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2250.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 91 17 2 57 20 3 75 14 4 79 6 5 68 11 6 50 9 7 43 8 8 58 15 9 52 11 10 138 24 11 88 23 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 59 830 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 58 338 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 53 1239 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 53 815 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 53 607 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 53 1051 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 53 713 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 52 1184 plFiberPlate : 8 possible sky positions to use as objects from a possible 74. plFiberPlate : 10 possible sky positions to use as objects from a possible 73. plFiberPlate : 7 possible sky positions to use as objects from a possible 72. plFiberPlate : 3 possible sky positions to use as objects from a possible 71. plFiberPlate : 5 possible sky positions to use as objects from a possible 70. plFiberPlate : 10 possible sky positions to use as objects from a possible 69. plFiberPlate : 5 possible sky positions to use as objects from a possible 68. plFiberPlate : 6 possible sky positions to use as objects from a possible 67. plFiberPlate : 5 possible sky positions to use as objects from a possible 66. plFiberPlate : 3 possible sky positions to use as objects from a possible 65. plFiberPlate : 2 possible sky positions to use as objects from a possible 64. plFiberPlate : 1 possible sky positions to use as objects from a possible 63. plFiberPlate : 2 possible sky positions to use as objects from a possible 62. plFiberPlate : 1 possible sky positions to use as objects from a possible 61. plFiberPlate : 4 possible sky positions to use as objects from a possible 60. plFiberPlate : 1 possible sky positions to use as objects from a possible 59. plFiberPlate : 9 possible sky positions to use as objects from a possible 58. plFiberPlate : 8 possible sky positions to use as objects from a possible 57. plFiberPlate : 5 possible sky positions to use as objects from a possible 56. plFiberPlate : 3 possible sky positions to use as objects from a possible 55. plFiberPlate : 2 possible sky positions to use as objects from a possible 54. plFiberPlate : 3 possible sky positions to use as objects from a possible 53. plFiberPlate : 2 possible sky positions to use as objects from a possible 52. plFiberPlate : 2 possible sky positions to use as objects from a possible 51. plFiberPlate : 7 possible sky positions to use as objects from a possible 50. plFiberPlate : 1 possible sky positions to use as objects from a possible 49. plFiberPlate : 1 possible sky positions to use as objects from a possible 48. plFiberPlate : 0 possible sky positions to use as objects from a possible 47. plFiberPlate: No sky found for bundle at -43.440 214.852, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 47. plFiberPlate: No sky found for bundle at -43.440 214.852, increase box by 20 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 47. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 46. plFiberPlate: No sky found for bundle at -1.751 222.768, increase box by 70 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 46. plFiberPlate : 2 possible sky positions to use as objects from a possible 45. plFiberPlate : 1 possible sky positions to use as objects from a possible 44. plFiberPlate : 1 possible sky positions to use as objects from a possible 43. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 841 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2249.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2250.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2250.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2251.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 54 141 2 48 91 3 34 113 4 48 140 5 40 157 6 24 111 7 24 116 8 35 145 9 30 156 10 69 212 11 61 136 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 189 160 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 189 155 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 189 156 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 188 82 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 188 23 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 188 57 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 188 200 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 188 18 plFiberPlate : 165 possible sky positions to use as objects from a possible 750. plFiberPlate : 136 possible sky positions to use as objects from a possible 749. plFiberPlate : 86 possible sky positions to use as objects from a possible 748. plFiberPlate : 44 possible sky positions to use as objects from a possible 747. plFiberPlate : 48 possible sky positions to use as objects from a possible 746. plFiberPlate : 31 possible sky positions to use as objects from a possible 745. plFiberPlate : 36 possible sky positions to use as objects from a possible 744. plFiberPlate : 102 possible sky positions to use as objects from a possible 743. plFiberPlate : 96 possible sky positions to use as objects from a possible 742. plFiberPlate : 59 possible sky positions to use as objects from a possible 741. plFiberPlate : 30 possible sky positions to use as objects from a possible 740. plFiberPlate : 18 possible sky positions to use as objects from a possible 739. plFiberPlate : 31 possible sky positions to use as objects from a possible 738. plFiberPlate : 24 possible sky positions to use as objects from a possible 737. plFiberPlate : 19 possible sky positions to use as objects from a possible 736. plFiberPlate : 17 possible sky positions to use as objects from a possible 735. plFiberPlate : 87 possible sky positions to use as objects from a possible 734. plFiberPlate : 71 possible sky positions to use as objects from a possible 733. plFiberPlate : 50 possible sky positions to use as objects from a possible 732. plFiberPlate : 28 possible sky positions to use as objects from a possible 731. plFiberPlate : 17 possible sky positions to use as objects from a possible 730. plFiberPlate : 12 possible sky positions to use as objects from a possible 729. plFiberPlate : 23 possible sky positions to use as objects from a possible 728. plFiberPlate : 10 possible sky positions to use as objects from a possible 727. plFiberPlate : 16 possible sky positions to use as objects from a possible 726. plFiberPlate : 58 possible sky positions to use as objects from a possible 725. plFiberPlate : 42 possible sky positions to use as objects from a possible 724. plFiberPlate : 20 possible sky positions to use as objects from a possible 723. plFiberPlate : 22 possible sky positions to use as objects from a possible 722. plFiberPlate : 27 possible sky positions to use as objects from a possible 721. plFiberPlate : 11 possible sky positions to use as objects from a possible 720. plFiberPlate : 17 possible sky positions to use as objects from a possible 719. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 784 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2250.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2251.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2251.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2252.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 39 158 2 24 107 3 21 117 4 25 151 5 17 186 6 19 108 7 18 119 8 16 145 9 21 161 10 44 220 11 35 153 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 243 174 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 243 196 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 243 202 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 242 156 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 242 37 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 241 221 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 241 173 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 240 80 plFiberPlate : 173 possible sky positions to use as objects from a possible 805. plFiberPlate : 106 possible sky positions to use as objects from a possible 804. plFiberPlate : 40 possible sky positions to use as objects from a possible 803. plFiberPlate : 42 possible sky positions to use as objects from a possible 802. plFiberPlate : 33 possible sky positions to use as objects from a possible 801. plFiberPlate : 34 possible sky positions to use as objects from a possible 800. plFiberPlate : 45 possible sky positions to use as objects from a possible 799. plFiberPlate : 103 possible sky positions to use as objects from a possible 798. plFiberPlate : 78 possible sky positions to use as objects from a possible 797. plFiberPlate : 46 possible sky positions to use as objects from a possible 796. plFiberPlate : 20 possible sky positions to use as objects from a possible 795. plFiberPlate : 14 possible sky positions to use as objects from a possible 794. plFiberPlate : 11 possible sky positions to use as objects from a possible 793. plFiberPlate : 15 possible sky positions to use as objects from a possible 792. plFiberPlate : 16 possible sky positions to use as objects from a possible 791. plFiberPlate : 30 possible sky positions to use as objects from a possible 790. plFiberPlate : 89 possible sky positions to use as objects from a possible 789. plFiberPlate : 80 possible sky positions to use as objects from a possible 788. plFiberPlate : 54 possible sky positions to use as objects from a possible 787. plFiberPlate : 39 possible sky positions to use as objects from a possible 786. plFiberPlate : 9 possible sky positions to use as objects from a possible 785. plFiberPlate : 20 possible sky positions to use as objects from a possible 784. plFiberPlate : 8 possible sky positions to use as objects from a possible 783. plFiberPlate : 11 possible sky positions to use as objects from a possible 782. plFiberPlate : 32 possible sky positions to use as objects from a possible 781. plFiberPlate : 65 possible sky positions to use as objects from a possible 780. plFiberPlate : 60 possible sky positions to use as objects from a possible 779. plFiberPlate : 33 possible sky positions to use as objects from a possible 778. plFiberPlate : 41 possible sky positions to use as objects from a possible 777. plFiberPlate : 7 possible sky positions to use as objects from a possible 776. plFiberPlate : 11 possible sky positions to use as objects from a possible 775. plFiberPlate : 34 possible sky positions to use as objects from a possible 774. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 779 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2251.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2252.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2252.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2253.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 114 2 23 80 3 36 84 4 33 102 5 44 125 6 18 99 7 14 97 8 16 97 9 20 123 10 43 152 11 18 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 283 85 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 282 138 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 276 247 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 275 260 plFiberPlate : adding spectro-photo std with objId = 4682 40 4 273 172 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 271 296 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 269 238 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 269 177 plFiberPlate : 104 possible sky positions to use as objects from a possible 574. plFiberPlate : 69 possible sky positions to use as objects from a possible 573. plFiberPlate : 40 possible sky positions to use as objects from a possible 572. plFiberPlate : 34 possible sky positions to use as objects from a possible 571. plFiberPlate : 28 possible sky positions to use as objects from a possible 570. plFiberPlate : 34 possible sky positions to use as objects from a possible 569. plFiberPlate : 47 possible sky positions to use as objects from a possible 568. plFiberPlate : 61 possible sky positions to use as objects from a possible 567. plFiberPlate : 42 possible sky positions to use as objects from a possible 566. plFiberPlate : 30 possible sky positions to use as objects from a possible 565. plFiberPlate : 23 possible sky positions to use as objects from a possible 564. plFiberPlate : 7 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 17 possible sky positions to use as objects from a possible 561. plFiberPlate : 19 possible sky positions to use as objects from a possible 560. plFiberPlate : 15 possible sky positions to use as objects from a possible 559. plFiberPlate : 60 possible sky positions to use as objects from a possible 558. plFiberPlate : 53 possible sky positions to use as objects from a possible 557. plFiberPlate : 41 possible sky positions to use as objects from a possible 556. plFiberPlate : 27 possible sky positions to use as objects from a possible 555. plFiberPlate : 15 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 17 possible sky positions to use as objects from a possible 552. plFiberPlate : 14 possible sky positions to use as objects from a possible 551. plFiberPlate : 23 possible sky positions to use as objects from a possible 550. plFiberPlate : 41 possible sky positions to use as objects from a possible 549. plFiberPlate : 55 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 20 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 18 possible sky positions to use as objects from a possible 544. plFiberPlate : 30 possible sky positions to use as objects from a possible 543. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2252.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2253.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2253.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2254.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 69 79 2 66 71 3 41 57 4 51 67 5 61 105 6 53 78 7 48 68 8 61 92 9 73 93 10 107 112 11 73 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5384 40 1 20 16 plFiberPlate : adding spectro-photo std with objId = 5384 40 1 19 256 plFiberPlate : adding spectro-photo std with objId = 5384 40 2 16 905 plFiberPlate : adding spectro-photo std with objId = 5384 40 2 16 899 plFiberPlate : adding spectro-photo std with objId = 5384 40 4 14 221 plFiberPlate : adding spectro-photo std with objId = 5384 40 4 14 217 plFiberPlate : adding spectro-photo std with objId = 5384 40 3 14 607 plFiberPlate : adding spectro-photo std with objId = 5384 40 3 14 213 plFiberPlate : 72 possible sky positions to use as objects from a possible 449. plFiberPlate : 41 possible sky positions to use as objects from a possible 448. plFiberPlate : 20 possible sky positions to use as objects from a possible 447. plFiberPlate : 15 possible sky positions to use as objects from a possible 446. plFiberPlate : 24 possible sky positions to use as objects from a possible 445. plFiberPlate : 23 possible sky positions to use as objects from a possible 444. plFiberPlate : 18 possible sky positions to use as objects from a possible 443. plFiberPlate : 56 possible sky positions to use as objects from a possible 442. plFiberPlate : 39 possible sky positions to use as objects from a possible 441. plFiberPlate : 25 possible sky positions to use as objects from a possible 440. plFiberPlate : 12 possible sky positions to use as objects from a possible 439. plFiberPlate : 15 possible sky positions to use as objects from a possible 438. plFiberPlate : 12 possible sky positions to use as objects from a possible 437. plFiberPlate : 13 possible sky positions to use as objects from a possible 436. plFiberPlate : 6 possible sky positions to use as objects from a possible 435. plFiberPlate : 13 possible sky positions to use as objects from a possible 434. plFiberPlate : 55 possible sky positions to use as objects from a possible 433. plFiberPlate : 38 possible sky positions to use as objects from a possible 432. plFiberPlate : 29 possible sky positions to use as objects from a possible 431. plFiberPlate : 9 possible sky positions to use as objects from a possible 430. plFiberPlate : 7 possible sky positions to use as objects from a possible 429. plFiberPlate : 13 possible sky positions to use as objects from a possible 428. plFiberPlate : 9 possible sky positions to use as objects from a possible 427. plFiberPlate : 4 possible sky positions to use as objects from a possible 426. plFiberPlate : 18 possible sky positions to use as objects from a possible 425. plFiberPlate : 35 possible sky positions to use as objects from a possible 424. plFiberPlate : 36 possible sky positions to use as objects from a possible 423. plFiberPlate : 24 possible sky positions to use as objects from a possible 422. plFiberPlate : 11 possible sky positions to use as objects from a possible 421. plFiberPlate : 13 possible sky positions to use as objects from a possible 420. plFiberPlate : 12 possible sky positions to use as objects from a possible 419. plFiberPlate : 10 possible sky positions to use as objects from a possible 418. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 682 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2253.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2254.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2254.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.1/plPlugMapP-2255.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 165 2 32 131 3 38 105 4 46 115 5 48 164 6 22 134 7 19 110 8 22 110 9 27 128 10 53 224 11 25 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 40 2 128 164 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 126 36 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 123 122 plFiberPlate : adding spectro-photo std with objId = 3226 40 2 123 92 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 122 60 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 122 134 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 119 120 plFiberPlate : adding spectro-photo std with objId = 3226 40 4 118 26 plFiberPlate : 120 possible sky positions to use as objects from a possible 748. plFiberPlate : 114 possible sky positions to use as objects from a possible 747. plFiberPlate : 56 possible sky positions to use as objects from a possible 746. plFiberPlate : 37 possible sky positions to use as objects from a possible 745. plFiberPlate : 45 possible sky positions to use as objects from a possible 744. plFiberPlate : 58 possible sky positions to use as objects from a possible 743. plFiberPlate : 46 possible sky positions to use as objects from a possible 742. plFiberPlate : 94 possible sky positions to use as objects from a possible 741. plFiberPlate : 74 possible sky positions to use as objects from a possible 740. plFiberPlate : 44 possible sky positions to use as objects from a possible 739. plFiberPlate : 16 possible sky positions to use as objects from a possible 738. plFiberPlate : 6 possible sky positions to use as objects from a possible 737. plFiberPlate : 8 possible sky positions to use as objects from a possible 736. plFiberPlate : 3 possible sky positions to use as objects from a possible 735. plFiberPlate : 20 possible sky positions to use as objects from a possible 734. plFiberPlate : 39 possible sky positions to use as objects from a possible 733. plFiberPlate : 41 possible sky positions to use as objects from a possible 732. plFiberPlate : 3 possible sky positions to use as objects from a possible 731. plFiberPlate : 1 possible sky positions to use as objects from a possible 730. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 729. plFiberPlate: No sky found for bundle at 64.215 65.200, increase box by 100 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 729. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 728. plFiberPlate: No sky found for bundle at 75.275 63.149, increase box by 110 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 728. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 120 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 130 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 140 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 150 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 160 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 170 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 180 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 727. plFiberPlate: No sky found for bundle at 84.967 61.327, increase box by 190 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 727. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 726. plFiberPlate: No sky found for bundle at 99.322 66.177, increase box by 110 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 726. plFiberPlate : 2 possible sky positions to use as objects from a possible 725. plFiberPlate : 19 possible sky positions to use as objects from a possible 724. plFiberPlate : 93 possible sky positions to use as objects from a possible 723. plFiberPlate : 67 possible sky positions to use as objects from a possible 722. plFiberPlate : 36 possible sky positions to use as objects from a possible 721. plFiberPlate : 28 possible sky positions to use as objects from a possible 720. plFiberPlate : 19 possible sky positions to use as objects from a possible 719. plFiberPlate : 21 possible sky positions to use as objects from a possible 718. plFiberPlate : 10 possible sky positions to use as objects from a possible 717. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2254.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2255.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.1/plOverlay-2255.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Jun 16 14:39:05 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 9 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 82 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2247.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2247.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2247.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 187 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2248.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2248.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2248.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 243 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2249.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2249.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2249.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 179 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2250.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2250.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2250.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 122 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2251.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2251.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2251.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 117 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2252.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2252.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2252.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2253.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2253.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2253.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 20 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2254.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2254.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2254.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2255.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2255.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.1/plFanuc-2255.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Jun 16 14:39:31 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa92dcfc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 9 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2247 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 744 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2248 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 849 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2249 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 905 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2250 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 841 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2251 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 784 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2252 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 779 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2253 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2254 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 682 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2255 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Jun 16 14:39:42 CDT 2005 Begin running "plateEnder dr2005.06.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.06.1 -morePipes 1" failed. PS: Read file for stderr output of this job.