Sender: LSF System Subject: Job 50470: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Jun 16 14:45:51 2005 Results reported at Thu Jun 16 14:48:02 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.06.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 88.81 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Jun 16 14:46:00 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Jun 16 14:46:17 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_246/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Thu Jun 16 14:46:18 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_246/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Thu Jun 16 14:46:18 CDT 2005 Begin running plate --------------------------------------------------------------- Thu Jun 16 14:46:18 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8cadddc makePlates : beginning loop over plObs chain; makePlates : making 8 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8077.par makePlates : plateInfo struct for plate 2256 : (h4).mjd 53558 (h4).raCen 258.7838 (h4).decCen 42.03 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 258.784 42.030 258.784 43.530 plMakePlateFromTile : mjd of obs : 53558.631469 Observed HA/dec of plate center, fiducial point (deg) : -0.002 42.021 -0.001 43.521 The rotation angle of the fid. point is 179.952900 plMakePlateFromTile : beginning loop over 1595 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8078.par makePlates : plateInfo struct for plate 2257 : (h4).mjd 53558 (h4).raCen 306.438 (h4).decCen 13.6697 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 306.438 13.670 306.438 15.170 plMakePlateFromTile : mjd of obs : 53558.763532 Observed HA/dec of plate center, fiducial point (deg) : -0.002 13.691 -0.002 15.191 The rotation angle of the fid. point is -0.018766 plMakePlateFromTile : beginning loop over 1648 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8079.par makePlates : plateInfo struct for plate 2258 : (h4).mjd 53558 (h4).raCen 309.3312 (h4).decCen 14.7344 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 309.331 14.734 309.331 16.234 plMakePlateFromTile : mjd of obs : 53558.771545 Observed HA/dec of plate center, fiducial point (deg) : -0.002 14.757 -0.002 16.256 The rotation angle of the fid. point is -0.017582 plMakePlateFromTile : beginning loop over 1664 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8080.par makePlates : plateInfo struct for plate 2259 : (h4).mjd 53558 (h4).raCen 312.2523 (h4).decCen 15.7627 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 312.252 15.763 312.252 17.263 plMakePlateFromTile : mjd of obs : 53558.779636 Observed HA/dec of plate center, fiducial point (deg) : -0.002 15.786 -0.002 17.286 The rotation angle of the fid. point is -0.016301 plMakePlateFromTile : beginning loop over 1559 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8081.par makePlates : plateInfo struct for plate 2260 : (h4).mjd 53558 (h4).raCen 332.501 (h4).decCen 21.47 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.501 21.470 332.501 22.970 plMakePlateFromTile : mjd of obs : 53558.835727 Observed HA/dec of plate center, fiducial point (deg) : -0.002 21.498 -0.002 22.997 The rotation angle of the fid. point is -0.005096 plMakePlateFromTile : beginning loop over 1758 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8082.par makePlates : plateInfo struct for plate 2261 : (h4).mjd 53558 (h4).raCen 340.973 (h4).decCen 23.07 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 340.973 23.070 340.973 24.570 plMakePlateFromTile : mjd of obs : 53558.859198 Observed HA/dec of plate center, fiducial point (deg) : -0.002 23.099 -0.002 24.599 The rotation angle of the fid. point is 0.000567 plMakePlateFromTile : beginning loop over 1713 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8083.par makePlates : plateInfo struct for plate 2262 : (h4).mjd 53558 (h4).raCen 263.1097 (h4).decCen 33.1635 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 263.110 33.163 263.110 34.664 plMakePlateFromTile : mjd of obs : 53558.643470 Observed HA/dec of plate center, fiducial point (deg) : -0.002 33.159 -0.001 34.659 The rotation angle of the fid. point is 179.661018 plMakePlateFromTile : beginning loop over 1551 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapT-8084.par makePlates : plateInfo struct for plate 2263 : (h4).mjd 53558 (h4).raCen 249.05311 (h4).decCen -6.27339 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 14.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 249.053 -6.273 249.053 -4.773 plMakePlateFromTile : mjd of obs : 53558.604588 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -6.273 -0.002 -4.774 The rotation angle of the fid. point is -0.024839 plMakePlateFromTile : beginning loop over 1934 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Jun 16 14:46:43 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 8 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2256.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 609 to list of science objects plFiberPlate : adding sky number 285 to list of science objects plFiberPlate : adding sky number 566 to list of science objects plFiberPlate : adding sky number 576 to list of science objects plFiberPlate : adding sky number 657 to list of science objects plFiberPlate : adding sky number 142 to list of science objects plFiberPlate : adding sky number 241 to list of science objects plFiberPlate : adding sky number 551 to list of science objects plFiberPlate : adding sky number 199 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 449 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 677 to list of science objects plFiberPlate : adding sky number 650 to list of science objects plFiberPlate : adding sky number 450 to list of science objects plFiberPlate : adding sky number 507 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 428 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 170 to list of science objects plFiberPlate : adding sky number 96 to list of science objects plFiberPlate : adding sky number 564 to list of science objects plFiberPlate : adding sky number 109 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 696 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 356 to list of science objects plFiberPlate : adding sky number 582 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 148 2 22 123 3 25 127 4 32 143 5 36 152 6 20 100 7 13 71 8 16 80 9 22 133 10 36 217 11 21 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5327 40 5 13 31 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 215 109 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 215 16 plFiberPlate : adding spectro-photo std with objId = 4682 40 4 210 195 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 209 55 plFiberPlate : adding spectro-photo std with objId = 4682 40 3 207 153 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 207 161 plFiberPlate : adding spectro-photo std with objId = 4682 40 5 206 98 plFiberPlate : 172 possible sky positions to use as objects from a possible 693. plFiberPlate : 137 possible sky positions to use as objects from a possible 692. plFiberPlate : 89 possible sky positions to use as objects from a possible 691. plFiberPlate : 29 possible sky positions to use as objects from a possible 690. plFiberPlate : 36 possible sky positions to use as objects from a possible 689. plFiberPlate : 49 possible sky positions to use as objects from a possible 688. plFiberPlate : 56 possible sky positions to use as objects from a possible 687. plFiberPlate : 130 possible sky positions to use as objects from a possible 686. plFiberPlate : 110 possible sky positions to use as objects from a possible 685. plFiberPlate : 92 possible sky positions to use as objects from a possible 684. plFiberPlate : 61 possible sky positions to use as objects from a possible 683. plFiberPlate : 23 possible sky positions to use as objects from a possible 682. plFiberPlate : 30 possible sky positions to use as objects from a possible 681. plFiberPlate : 28 possible sky positions to use as objects from a possible 680. plFiberPlate : 19 possible sky positions to use as objects from a possible 679. plFiberPlate : 40 possible sky positions to use as objects from a possible 678. plFiberPlate : 65 possible sky positions to use as objects from a possible 677. plFiberPlate : 41 possible sky positions to use as objects from a possible 676. plFiberPlate : 13 possible sky positions to use as objects from a possible 675. plFiberPlate : 4 possible sky positions to use as objects from a possible 674. plFiberPlate : 5 possible sky positions to use as objects from a possible 673. plFiberPlate : 4 possible sky positions to use as objects from a possible 672. plFiberPlate : 3 possible sky positions to use as objects from a possible 671. plFiberPlate : 2 possible sky positions to use as objects from a possible 670. plFiberPlate : 12 possible sky positions to use as objects from a possible 669. plFiberPlate : 27 possible sky positions to use as objects from a possible 668. plFiberPlate : 3 possible sky positions to use as objects from a possible 667. plFiberPlate : 3 possible sky positions to use as objects from a possible 666. plFiberPlate : 0 possible sky positions to use as objects from a possible 665. plFiberPlate: No sky found for bundle at 60.730 265.267, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 665. plFiberPlate: No sky found for bundle at 60.730 265.267, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 665. plFiberPlate: No sky found for bundle at 60.730 265.267, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 665. plFiberPlate: No sky found for bundle at 60.730 265.267, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 665. plFiberPlate: No sky found for bundle at 60.730 265.267, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 665. plFiberPlate: No sky found for bundle at 60.730 265.267, increase box by 60 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 665. plFiberPlate : 1 possible sky positions to use as objects from a possible 664. plFiberPlate : 0 possible sky positions to use as objects from a possible 663. plFiberPlate: No sky found for bundle at 103.461 250.791, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 663. plFiberPlate : 2 possible sky positions to use as objects from a possible 662. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 745 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2256.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2256.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2257.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 363 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 376 to list of science objects plFiberPlate : adding sky number 309 to list of science objects plFiberPlate : adding sky number 290 to list of science objects plFiberPlate : adding sky number 571 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 452 to list of science objects plFiberPlate : adding sky number 308 to list of science objects plFiberPlate : adding sky number 449 to list of science objects plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 518 to list of science objects plFiberPlate : adding sky number 164 to list of science objects plFiberPlate : adding sky number 204 to list of science objects plFiberPlate : adding sky number 467 to list of science objects plFiberPlate : adding sky number 531 to list of science objects plFiberPlate : adding sky number 40 to list of science objects plFiberPlate : adding sky number 546 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 110 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 508 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 259 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 547 to list of science objects plFiberPlate : adding sky number 507 to list of science objects plFiberPlate : adding sky number 478 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 109 2 26 89 3 20 79 4 16 99 5 27 115 6 16 92 7 14 84 8 21 100 9 16 110 10 35 140 11 33 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 20 1425 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 19 1074 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 17 912 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 15 1038 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 15 285 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 13 563 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 13 491 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 12 1362 plFiberPlate : 103 possible sky positions to use as objects from a possible 561. plFiberPlate : 70 possible sky positions to use as objects from a possible 560. plFiberPlate : 52 possible sky positions to use as objects from a possible 559. plFiberPlate : 30 possible sky positions to use as objects from a possible 558. plFiberPlate : 29 possible sky positions to use as objects from a possible 557. plFiberPlate : 35 possible sky positions to use as objects from a possible 556. plFiberPlate : 37 possible sky positions to use as objects from a possible 555. plFiberPlate : 63 possible sky positions to use as objects from a possible 554. plFiberPlate : 49 possible sky positions to use as objects from a possible 553. plFiberPlate : 35 possible sky positions to use as objects from a possible 552. plFiberPlate : 22 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 18 possible sky positions to use as objects from a possible 547. plFiberPlate : 14 possible sky positions to use as objects from a possible 546. plFiberPlate : 69 possible sky positions to use as objects from a possible 545. plFiberPlate : 59 possible sky positions to use as objects from a possible 544. plFiberPlate : 39 possible sky positions to use as objects from a possible 543. plFiberPlate : 25 possible sky positions to use as objects from a possible 542. plFiberPlate : 16 possible sky positions to use as objects from a possible 541. plFiberPlate : 16 possible sky positions to use as objects from a possible 540. plFiberPlate : 14 possible sky positions to use as objects from a possible 539. plFiberPlate : 16 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 40 possible sky positions to use as objects from a possible 536. plFiberPlate : 25 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 14 possible sky positions to use as objects from a possible 530. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 849 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2256.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2257.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2257.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2258.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 336 to list of science objects plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 472 to list of science objects plFiberPlate : adding sky number 317 to list of science objects plFiberPlate : adding sky number 413 to list of science objects plFiberPlate : adding sky number 328 to list of science objects plFiberPlate : adding sky number 24 to list of science objects plFiberPlate : adding sky number 269 to list of science objects plFiberPlate : adding sky number 573 to list of science objects plFiberPlate : adding sky number 571 to list of science objects plFiberPlate : adding sky number 441 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 451 to list of science objects plFiberPlate : adding sky number 390 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 418 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 266 to list of science objects plFiberPlate : adding sky number 532 to list of science objects plFiberPlate : adding sky number 500 to list of science objects plFiberPlate : adding sky number 199 to list of science objects plFiberPlate : adding sky number 137 to list of science objects plFiberPlate : adding sky number 536 to list of science objects plFiberPlate : adding sky number 210 to list of science objects plFiberPlate : adding sky number 411 to list of science objects plFiberPlate : adding sky number 571 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 391 to list of science objects plFiberPlate : adding sky number 510 to list of science objects plFiberPlate : adding sky number 261 to list of science objects plFiberPlate : adding sky number 547 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 119 2 17 94 3 16 88 4 18 105 5 22 114 6 12 94 7 5 95 8 9 105 9 10 116 10 35 156 11 28 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 43 1416 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 39 933 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 36 1301 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 36 1136 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 36 371 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 35 933 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 34 1611 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 32 1300 plFiberPlate : 119 possible sky positions to use as objects from a possible 592. plFiberPlate : 75 possible sky positions to use as objects from a possible 591. plFiberPlate : 67 possible sky positions to use as objects from a possible 590. plFiberPlate : 35 possible sky positions to use as objects from a possible 589. plFiberPlate : 34 possible sky positions to use as objects from a possible 588. plFiberPlate : 25 possible sky positions to use as objects from a possible 587. plFiberPlate : 44 possible sky positions to use as objects from a possible 586. plFiberPlate : 73 possible sky positions to use as objects from a possible 585. plFiberPlate : 54 possible sky positions to use as objects from a possible 584. plFiberPlate : 49 possible sky positions to use as objects from a possible 583. plFiberPlate : 35 possible sky positions to use as objects from a possible 582. plFiberPlate : 20 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 13 possible sky positions to use as objects from a possible 578. plFiberPlate : 35 possible sky positions to use as objects from a possible 577. plFiberPlate : 57 possible sky positions to use as objects from a possible 576. plFiberPlate : 45 possible sky positions to use as objects from a possible 575. plFiberPlate : 34 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : 19 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 11 possible sky positions to use as objects from a possible 568. plFiberPlate : 38 possible sky positions to use as objects from a possible 567. plFiberPlate : 38 possible sky positions to use as objects from a possible 566. plFiberPlate : 28 possible sky positions to use as objects from a possible 565. plFiberPlate : 19 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 905 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2257.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2258.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2258.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2259.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 31 to list of science objects plFiberPlate : adding sky number 63 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : adding sky number 10 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 41 to list of science objects plFiberPlate : adding sky number 18 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 19 to list of science objects plFiberPlate : adding sky number 28 to list of science objects plFiberPlate : adding sky number 14 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 24 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 5 to list of science objects plFiberPlate : adding sky number 6 to list of science objects plFiberPlate : adding sky number 26 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 46 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 18 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 92 13 2 59 15 3 78 7 4 83 3 5 72 8 6 52 4 7 44 4 8 57 9 9 54 6 10 136 17 11 90 16 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 58 601 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 58 338 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 53 1239 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 53 815 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 53 607 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 53 1051 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 53 713 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 52 1184 plFiberPlate : 5 possible sky positions to use as objects from a possible 46. plFiberPlate : 4 possible sky positions to use as objects from a possible 45. plFiberPlate : 5 possible sky positions to use as objects from a possible 44. plFiberPlate : 3 possible sky positions to use as objects from a possible 43. plFiberPlate : 3 possible sky positions to use as objects from a possible 42. plFiberPlate : 7 possible sky positions to use as objects from a possible 41. plFiberPlate : 5 possible sky positions to use as objects from a possible 40. plFiberPlate : 3 possible sky positions to use as objects from a possible 39. plFiberPlate : 2 possible sky positions to use as objects from a possible 38. plFiberPlate : 1 possible sky positions to use as objects from a possible 37. plFiberPlate : 0 possible sky positions to use as objects from a possible 36. plFiberPlate: No sky found for bundle at -89.936 -56.637, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 36. plFiberPlate: No sky found for bundle at -89.936 -56.637, increase box by 20 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 36. plFiberPlate : 0 possible sky positions to use as objects from a possible 35. plFiberPlate: No sky found for bundle at -41.547 -75.950, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 35. plFiberPlate: No sky found for bundle at -41.547 -75.950, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 35. plFiberPlate: No sky found for bundle at -41.547 -75.950, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 35. plFiberPlate : 0 possible sky positions to use as objects from a possible 34. plFiberPlate: No sky found for bundle at 40.555 -60.038, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 34. plFiberPlate : 1 possible sky positions to use as objects from a possible 33. plFiberPlate : 2 possible sky positions to use as objects from a possible 32. plFiberPlate : 0 possible sky positions to use as objects from a possible 31. plFiberPlate: No sky found for bundle at 279.095 -52.750, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 31. plFiberPlate: No sky found for bundle at 279.095 -52.750, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 31. plFiberPlate: No sky found for bundle at 279.095 -52.750, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 31. plFiberPlate: No sky found for bundle at 279.095 -52.750, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 31. plFiberPlate: No sky found for bundle at 279.095 -52.750, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 31. plFiberPlate : 5 possible sky positions to use as objects from a possible 30. plFiberPlate : 4 possible sky positions to use as objects from a possible 29. plFiberPlate : 3 possible sky positions to use as objects from a possible 28. plFiberPlate : 0 possible sky positions to use as objects from a possible 27. plFiberPlate: No sky found for bundle at -62.557 73.913, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 27. plFiberPlate: No sky found for bundle at -62.557 73.913, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 27. plFiberPlate: No sky found for bundle at -62.557 73.913, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 27. plFiberPlate: No sky found for bundle at -62.557 73.913, increase box by 40 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 27. plFiberPlate : 1 possible sky positions to use as objects from a possible 26. plFiberPlate : 2 possible sky positions to use as objects from a possible 25. plFiberPlate : 2 possible sky positions to use as objects from a possible 24. plFiberPlate : 1 possible sky positions to use as objects from a possible 23. plFiberPlate : 0 possible sky positions to use as objects from a possible 22. plFiberPlate: No sky found for bundle at 285.865 67.249, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 22. plFiberPlate: No sky found for bundle at 285.865 67.249, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 22. plFiberPlate : 1 possible sky positions to use as objects from a possible 21. plFiberPlate : 0 possible sky positions to use as objects from a possible 20. plFiberPlate: No sky found for bundle at -113.157 192.825, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 20. plFiberPlate: No sky found for bundle at -113.157 192.825, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 20. plFiberPlate: No sky found for bundle at -113.157 192.825, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 20. plFiberPlate : 0 possible sky positions to use as objects from a possible 19. plFiberPlate: No sky found for bundle at -49.352 214.950, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 19. plFiberPlate: No sky found for bundle at -49.352 214.950, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 19. plFiberPlate : 0 possible sky positions to use as objects from a possible 18. plFiberPlate: No sky found for bundle at 7.960 227.417, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 18. plFiberPlate: No sky found for bundle at 7.960 227.417, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 18. plFiberPlate: No sky found for bundle at 7.960 227.417, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 18. plFiberPlate: No sky found for bundle at 7.960 227.417, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 18. plFiberPlate: No sky found for bundle at 7.960 227.417, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 18. plFiberPlate : 0 possible sky positions to use as objects from a possible 17. plFiberPlate: No sky found for bundle at 57.303 230.907, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 17. plFiberPlate: No sky found for bundle at 57.303 230.907, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 17. plFiberPlate: No sky found for bundle at 57.303 230.907, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 17. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 120 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 130 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 16. plFiberPlate: No sky found for bundle at 108.406 241.294, increase box by 140 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 16. plFiberPlate : 0 possible sky positions to use as objects from a possible 15. plFiberPlate: No sky found for bundle at 185.422 200.971, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 15. plFiberPlate: No sky found for bundle at 185.422 200.971, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 15. plFiberPlate: No sky found for bundle at 185.422 200.971, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 15. plFiberPlate: No sky found for bundle at 185.422 200.971, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 15. plFiberPlate: No sky found for bundle at 185.422 200.971, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 15. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 841 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2258.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2259.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2259.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2260.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 270 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 170 to list of science objects plFiberPlate : adding sky number 427 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 533 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : adding sky number 576 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 539 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 685 to list of science objects plFiberPlate : adding sky number 37 to list of science objects plFiberPlate : adding sky number 375 to list of science objects plFiberPlate : adding sky number 126 to list of science objects plFiberPlate : adding sky number 172 to list of science objects plFiberPlate : adding sky number 572 to list of science objects plFiberPlate : adding sky number 524 to list of science objects plFiberPlate : adding sky number 469 to list of science objects plFiberPlate : adding sky number 690 to list of science objects plFiberPlate : adding sky number 455 to list of science objects plFiberPlate : adding sky number 540 to list of science objects plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : adding sky number 95 to list of science objects plFiberPlate : adding sky number 368 to list of science objects plFiberPlate : adding sky number 55 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 325 to list of science objects plFiberPlate : adding sky number 577 to list of science objects plFiberPlate : adding sky number 403 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 58 130 2 49 83 3 34 99 4 49 122 5 51 148 6 31 105 7 25 113 8 36 139 9 35 151 10 75 198 11 63 129 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 189 160 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 189 155 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 189 202 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 188 82 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 188 23 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 188 200 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 188 18 plFiberPlate : adding spectro-photo std with objId = 4836 40 4 187 42 plFiberPlate : 134 possible sky positions to use as objects from a possible 702. plFiberPlate : 121 possible sky positions to use as objects from a possible 701. plFiberPlate : 91 possible sky positions to use as objects from a possible 700. plFiberPlate : 41 possible sky positions to use as objects from a possible 699. plFiberPlate : 28 possible sky positions to use as objects from a possible 698. plFiberPlate : 43 possible sky positions to use as objects from a possible 697. plFiberPlate : 58 possible sky positions to use as objects from a possible 696. plFiberPlate : 94 possible sky positions to use as objects from a possible 695. plFiberPlate : 87 possible sky positions to use as objects from a possible 694. plFiberPlate : 73 possible sky positions to use as objects from a possible 693. plFiberPlate : 45 possible sky positions to use as objects from a possible 692. plFiberPlate : 28 possible sky positions to use as objects from a possible 691. plFiberPlate : 28 possible sky positions to use as objects from a possible 690. plFiberPlate : 16 possible sky positions to use as objects from a possible 689. plFiberPlate : 18 possible sky positions to use as objects from a possible 688. plFiberPlate : 15 possible sky positions to use as objects from a possible 687. plFiberPlate : 98 possible sky positions to use as objects from a possible 686. plFiberPlate : 75 possible sky positions to use as objects from a possible 685. plFiberPlate : 63 possible sky positions to use as objects from a possible 684. plFiberPlate : 25 possible sky positions to use as objects from a possible 683. plFiberPlate : 22 possible sky positions to use as objects from a possible 682. plFiberPlate : 20 possible sky positions to use as objects from a possible 681. plFiberPlate : 33 possible sky positions to use as objects from a possible 680. plFiberPlate : 21 possible sky positions to use as objects from a possible 679. plFiberPlate : 17 possible sky positions to use as objects from a possible 678. plFiberPlate : 60 possible sky positions to use as objects from a possible 677. plFiberPlate : 50 possible sky positions to use as objects from a possible 676. plFiberPlate : 29 possible sky positions to use as objects from a possible 675. plFiberPlate : 23 possible sky positions to use as objects from a possible 674. plFiberPlate : 30 possible sky positions to use as objects from a possible 673. plFiberPlate : 13 possible sky positions to use as objects from a possible 672. plFiberPlate : 16 possible sky positions to use as objects from a possible 671. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 784 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2259.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2260.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2260.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2261.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 621 to list of science objects plFiberPlate : adding sky number 42 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 818 to list of science objects plFiberPlate : adding sky number 167 to list of science objects plFiberPlate : adding sky number 727 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 813 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 707 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 3 to list of science objects plFiberPlate : adding sky number 747 to list of science objects plFiberPlate : adding sky number 480 to list of science objects plFiberPlate : adding sky number 145 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 734 to list of science objects plFiberPlate : adding sky number 659 to list of science objects plFiberPlate : adding sky number 288 to list of science objects plFiberPlate : adding sky number 443 to list of science objects plFiberPlate : adding sky number 464 to list of science objects plFiberPlate : adding sky number 362 to list of science objects plFiberPlate : adding sky number 549 to list of science objects plFiberPlate : adding sky number 79 to list of science objects plFiberPlate : adding sky number 423 to list of science objects plFiberPlate : adding sky number 602 to list of science objects plFiberPlate : adding sky number 241 to list of science objects plFiberPlate : adding sky number 787 to list of science objects plFiberPlate : adding sky number 457 to list of science objects plFiberPlate : adding sky number 695 to list of science objects plFiberPlate : adding sky number 591 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 43 163 2 31 105 3 21 115 4 22 157 5 19 178 6 24 103 7 21 106 8 17 139 9 26 155 10 43 217 11 39 159 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 243 174 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 243 196 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 243 202 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 242 156 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 242 37 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 241 221 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 241 173 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 240 80 plFiberPlate : 166 possible sky positions to use as objects from a possible 790. plFiberPlate : 113 possible sky positions to use as objects from a possible 789. plFiberPlate : 70 possible sky positions to use as objects from a possible 788. plFiberPlate : 55 possible sky positions to use as objects from a possible 787. plFiberPlate : 24 possible sky positions to use as objects from a possible 786. plFiberPlate : 63 possible sky positions to use as objects from a possible 785. plFiberPlate : 45 possible sky positions to use as objects from a possible 784. plFiberPlate : 102 possible sky positions to use as objects from a possible 783. plFiberPlate : 84 possible sky positions to use as objects from a possible 782. plFiberPlate : 62 possible sky positions to use as objects from a possible 781. plFiberPlate : 30 possible sky positions to use as objects from a possible 780. plFiberPlate : 14 possible sky positions to use as objects from a possible 779. plFiberPlate : 32 possible sky positions to use as objects from a possible 778. plFiberPlate : 24 possible sky positions to use as objects from a possible 777. plFiberPlate : 24 possible sky positions to use as objects from a possible 776. plFiberPlate : 29 possible sky positions to use as objects from a possible 775. plFiberPlate : 110 possible sky positions to use as objects from a possible 774. plFiberPlate : 71 possible sky positions to use as objects from a possible 773. plFiberPlate : 50 possible sky positions to use as objects from a possible 772. plFiberPlate : 28 possible sky positions to use as objects from a possible 771. plFiberPlate : 10 possible sky positions to use as objects from a possible 770. plFiberPlate : 22 possible sky positions to use as objects from a possible 769. plFiberPlate : 9 possible sky positions to use as objects from a possible 768. plFiberPlate : 26 possible sky positions to use as objects from a possible 767. plFiberPlate : 17 possible sky positions to use as objects from a possible 766. plFiberPlate : 60 possible sky positions to use as objects from a possible 765. plFiberPlate : 46 possible sky positions to use as objects from a possible 764. plFiberPlate : 27 possible sky positions to use as objects from a possible 763. plFiberPlate : 26 possible sky positions to use as objects from a possible 762. plFiberPlate : 23 possible sky positions to use as objects from a possible 761. plFiberPlate : 13 possible sky positions to use as objects from a possible 760. plFiberPlate : 20 possible sky positions to use as objects from a possible 759. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 779 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2260.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2261.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2261.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2262.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 366 to list of science objects plFiberPlate : adding sky number 20 to list of science objects plFiberPlate : adding sky number 433 to list of science objects plFiberPlate : adding sky number 482 to list of science objects plFiberPlate : adding sky number 534 to list of science objects plFiberPlate : adding sky number 503 to list of science objects plFiberPlate : adding sky number 478 to list of science objects plFiberPlate : adding sky number 563 to list of science objects plFiberPlate : adding sky number 426 to list of science objects plFiberPlate : adding sky number 517 to list of science objects plFiberPlate : adding sky number 562 to list of science objects plFiberPlate : adding sky number 380 to list of science objects plFiberPlate : adding sky number 283 to list of science objects plFiberPlate : adding sky number 93 to list of science objects plFiberPlate : adding sky number 471 to list of science objects plFiberPlate : adding sky number 504 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 367 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 393 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 41 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 124 to list of science objects plFiberPlate : adding sky number 360 to list of science objects plFiberPlate : adding sky number 282 to list of science objects plFiberPlate : adding sky number 536 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 115 2 26 80 3 45 79 4 36 97 5 51 118 6 21 95 7 15 93 8 18 91 9 23 114 10 51 149 11 21 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 283 85 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 282 138 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 276 247 plFiberPlate : adding spectro-photo std with objId = 4682 40 1 275 260 plFiberPlate : adding spectro-photo std with objId = 4682 40 4 273 172 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 271 296 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 269 238 plFiberPlate : adding spectro-photo std with objId = 4682 40 2 269 177 plFiberPlate : 94 possible sky positions to use as objects from a possible 550. plFiberPlate : 57 possible sky positions to use as objects from a possible 549. plFiberPlate : 33 possible sky positions to use as objects from a possible 548. plFiberPlate : 24 possible sky positions to use as objects from a possible 547. plFiberPlate : 33 possible sky positions to use as objects from a possible 546. plFiberPlate : 42 possible sky positions to use as objects from a possible 545. plFiberPlate : 53 possible sky positions to use as objects from a possible 544. plFiberPlate : 70 possible sky positions to use as objects from a possible 543. plFiberPlate : 50 possible sky positions to use as objects from a possible 542. plFiberPlate : 39 possible sky positions to use as objects from a possible 541. plFiberPlate : 30 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 20 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 24 possible sky positions to use as objects from a possible 535. plFiberPlate : 76 possible sky positions to use as objects from a possible 534. plFiberPlate : 60 possible sky positions to use as objects from a possible 533. plFiberPlate : 43 possible sky positions to use as objects from a possible 532. plFiberPlate : 22 possible sky positions to use as objects from a possible 531. plFiberPlate : 15 possible sky positions to use as objects from a possible 530. plFiberPlate : 19 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 40 possible sky positions to use as objects from a possible 525. plFiberPlate : 45 possible sky positions to use as objects from a possible 524. plFiberPlate : 27 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : 17 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2261.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2262.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2262.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.06.2/plPlugMapP-2263.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 239 to list of science objects plFiberPlate : adding sky number 314 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 205 to list of science objects plFiberPlate : adding sky number 257 to list of science objects plFiberPlate : adding sky number 408 to list of science objects plFiberPlate : adding sky number 194 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 364 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 1 to list of science objects plFiberPlate : adding sky number 147 to list of science objects plFiberPlate : adding sky number 254 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 285 to list of science objects plFiberPlate : adding sky number 203 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 298 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 259 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 288 to list of science objects plFiberPlate : adding sky number 278 to list of science objects plFiberPlate : adding sky number 262 to list of science objects plFiberPlate : adding sky number 142 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 73 71 2 75 63 3 46 48 4 52 57 5 63 99 6 54 71 7 51 64 8 64 86 9 75 90 10 115 92 11 83 71 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5384 40 1 20 16 plFiberPlate : adding spectro-photo std with objId = 5384 40 1 19 256 plFiberPlate : adding spectro-photo std with objId = 5384 40 1 17 228 plFiberPlate : adding spectro-photo std with objId = 5384 40 2 16 315 plFiberPlate : adding spectro-photo std with objId = 5384 40 4 14 221 plFiberPlate : adding spectro-photo std with objId = 5384 40 4 14 217 plFiberPlate : adding spectro-photo std with objId = 5384 40 3 14 607 plFiberPlate : adding spectro-photo std with objId = 5384 40 3 14 601 plFiberPlate : 65 possible sky positions to use as objects from a possible 406. plFiberPlate : 27 possible sky positions to use as objects from a possible 405. plFiberPlate : 15 possible sky positions to use as objects from a possible 404. plFiberPlate : 19 possible sky positions to use as objects from a possible 403. plFiberPlate : 21 possible sky positions to use as objects from a possible 402. plFiberPlate : 13 possible sky positions to use as objects from a possible 401. plFiberPlate : 19 possible sky positions to use as objects from a possible 400. plFiberPlate : 40 possible sky positions to use as objects from a possible 399. plFiberPlate : 35 possible sky positions to use as objects from a possible 398. plFiberPlate : 17 possible sky positions to use as objects from a possible 397. plFiberPlate : 8 possible sky positions to use as objects from a possible 396. plFiberPlate : 6 possible sky positions to use as objects from a possible 395. plFiberPlate : 9 possible sky positions to use as objects from a possible 394. plFiberPlate : 14 possible sky positions to use as objects from a possible 393. plFiberPlate : 8 possible sky positions to use as objects from a possible 392. plFiberPlate : 11 possible sky positions to use as objects from a possible 391. plFiberPlate : 59 possible sky positions to use as objects from a possible 390. plFiberPlate : 41 possible sky positions to use as objects from a possible 389. plFiberPlate : 28 possible sky positions to use as objects from a possible 388. plFiberPlate : 13 possible sky positions to use as objects from a possible 387. plFiberPlate : 12 possible sky positions to use as objects from a possible 386. plFiberPlate : 18 possible sky positions to use as objects from a possible 385. plFiberPlate : 15 possible sky positions to use as objects from a possible 384. plFiberPlate : 4 possible sky positions to use as objects from a possible 383. plFiberPlate : 16 possible sky positions to use as objects from a possible 382. plFiberPlate : 45 possible sky positions to use as objects from a possible 381. plFiberPlate : 38 possible sky positions to use as objects from a possible 380. plFiberPlate : 22 possible sky positions to use as objects from a possible 379. plFiberPlate : 17 possible sky positions to use as objects from a possible 378. plFiberPlate : 13 possible sky positions to use as objects from a possible 377. plFiberPlate : 16 possible sky positions to use as objects from a possible 376. plFiberPlate : 19 possible sky positions to use as objects from a possible 375. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 682 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2262.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2263.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.06.2/plOverlay-2263.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Jun 16 14:47:01 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 8 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 83 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2256.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2256.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2256.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 187 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2257.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2257.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2257.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 243 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2258.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2258.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2258.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 179 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2259.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2259.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2259.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 122 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2260.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2260.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2260.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 117 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2261.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2261.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2261.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2262.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2262.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2262.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 20 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2263.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2263.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.06.2/plFanuc-2263.par plMakeFanucCodes : temperature difference 5.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00012532 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Jun 16 14:47:22 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x9306cfc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 8 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2256 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 745 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2257 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 849 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2258 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 905 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2259 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 841 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2260 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 784 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2261 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 779 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2262 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2263 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 14.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 682 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Jun 16 14:47:33 CDT 2005 Begin running "plateEnder dr2005.06.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_246/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_246/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.06.2 -morePipes 1" failed. PS: Read file for stderr output of this job.