Sender: LSF System Subject: Job 64748: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Oct 17 14:22:35 2005 Results reported at Mon Oct 17 14:26:19 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.10.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 177.88 sec. Max Memory : 12 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Oct 17 14:22:42 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Oct 17 14:22:51 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_83/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Mon Oct 17 14:22:51 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_83/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Mon Oct 17 14:22:52 CDT 2005 Begin running plate --------------------------------------------------------------- Mon Oct 17 14:22:52 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x957d2f4 makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8089.par makePlates : plateInfo struct for plate 2303 : (h4).mjd 53689 (h4).raCen 301.863 (h4).decCen -11.457 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 301.863 -11.457 301.863 -9.957 plMakePlateFromTile : mjd of obs : 53689.393203 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -11.425 0.001 -9.926 The rotation angle of the fid. point is -0.028756 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8090.par makePlates : plateInfo struct for plate 2304 : (h4).mjd 53689 (h4).raCen 139.892 (h4).decCen 22.1699 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.892 22.170 139.892 23.670 plMakePlateFromTile : mjd of obs : 53689.941793 Observed HA/dec of plate center, fiducial point (deg) : -0.002 22.149 -0.003 23.649 The rotation angle of the fid. point is 0.035721 plMakePlateFromTile : beginning loop over 1587 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8091.par makePlates : plateInfo struct for plate 2305 : (h4).mjd 53689 (h4).raCen 320.562 (h4).decCen -7.17568 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 320.562 -7.176 320.562 -5.676 plMakePlateFromTile : mjd of obs : 53689.444999 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -7.138 0.001 -5.638 The rotation angle of the fid. point is -0.022424 plMakePlateFromTile : beginning loop over 1678 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8092.par makePlates : plateInfo struct for plate 2306 : (h4).mjd 53689 (h4).raCen 33.2045 (h4).decCen 6.618 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 33.205 6.618 33.205 8.118 plMakePlateFromTile : mjd of obs : 53689.646239 Observed HA/dec of plate center, fiducial point (deg) : -0.002 6.656 -0.003 8.156 The rotation angle of the fid. point is 0.020997 plMakePlateFromTile : beginning loop over 1579 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8093.par makePlates : plateInfo struct for plate 2307 : (h4).mjd 53689 (h4).raCen 45.2426 (h4).decCen 5.7385 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 45.243 5.739 45.243 7.239 plMakePlateFromTile : mjd of obs : 53689.679589 Observed HA/dec of plate center, fiducial point (deg) : -0.002 5.773 -0.003 7.272 The rotation angle of the fid. point is 0.026360 plMakePlateFromTile : beginning loop over 1588 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8094.par makePlates : plateInfo struct for plate 2308 : (h4).mjd 53689 (h4).raCen 332.778 (h4).decCen 6.35524 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.778 6.355 332.778 7.855 plMakePlateFromTile : mjd of obs : 53689.478830 Observed HA/dec of plate center, fiducial point (deg) : 0.000 6.393 0.000 7.893 The rotation angle of the fid. point is -0.016880 plMakePlateFromTile : beginning loop over 1619 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8095.par makePlates : plateInfo struct for plate 2309 : (h4).mjd 53689 (h4).raCen 332.604 (h4).decCen -8.468 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.604 -8.468 332.604 -6.968 plMakePlateFromTile : mjd of obs : 53689.478360 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -8.425 0.000 -6.926 The rotation angle of the fid. point is -0.017230 plMakePlateFromTile : beginning loop over 1638 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8096.par makePlates : plateInfo struct for plate 2310 : (h4).mjd 53689 (h4).raCen 344.841 (h4).decCen 7.04533 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 344.841 7.045 344.841 8.545 plMakePlateFromTile : mjd of obs : 53689.512252 Observed HA/dec of plate center, fiducial point (deg) : 0.000 7.086 0.000 8.585 The rotation angle of the fid. point is -0.010574 plMakePlateFromTile : beginning loop over 2224 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8097.par makePlates : plateInfo struct for plate 2311 : (h4).mjd 53689 (h4).raCen 356.878 (h4).decCen -9.9017 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 356.878 -9.902 356.878 -8.402 plMakePlateFromTile : mjd of obs : 53689.545605 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -9.854 0.000 -8.354 The rotation angle of the fid. point is -0.004702 plMakePlateFromTile : beginning loop over 1571 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8098.par makePlates : plateInfo struct for plate 2312 : (h4).mjd 53689 (h4).raCen 9.0344 (h4).decCen 7.48163 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 9.034 7.482 9.034 8.982 plMakePlateFromTile : mjd of obs : 53689.579276 Observed HA/dec of plate center, fiducial point (deg) : -0.002 7.524 -0.003 9.023 The rotation angle of the fid. point is 0.008024 plMakePlateFromTile : beginning loop over 1939 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8099.par makePlates : plateInfo struct for plate 2313 : (h4).mjd 53689 (h4).raCen 17 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 17.000 0.000 17.000 1.500 plMakePlateFromTile : mjd of obs : 53689.601343 Observed HA/dec of plate center, fiducial point (deg) : -0.002 0.044 -0.003 1.543 The rotation angle of the fid. point is 0.010893 plMakePlateFromTile : beginning loop over 1539 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8100.par makePlates : plateInfo struct for plate 2314 : (h4).mjd 53689 (h4).raCen 21.1309 (h4).decCen 7.20789 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.131 7.208 21.131 8.708 plMakePlateFromTile : mjd of obs : 53689.612790 Observed HA/dec of plate center, fiducial point (deg) : -0.002 7.249 -0.003 8.748 The rotation angle of the fid. point is 0.014793 plMakePlateFromTile : beginning loop over 1580 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8101.par makePlates : plateInfo struct for plate 2315 : (h4).mjd 53689 (h4).raCen 127.732 (h4).decCen 24.4045 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.732 24.404 127.732 25.904 plMakePlateFromTile : mjd of obs : 53689.908119 Observed HA/dec of plate center, fiducial point (deg) : -0.002 24.388 -0.003 25.888 The rotation angle of the fid. point is 0.044384 plMakePlateFromTile : beginning loop over 1645 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8102.par makePlates : plateInfo struct for plate 2316 : (h4).mjd 53689 (h4).raCen 129.62 (h4).decCen 53.9052 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.620 53.905 129.620 55.405 plMakePlateFromTile : mjd of obs : 53689.913418 Observed HA/dec of plate center, fiducial point (deg) : -0.002 53.877 -0.004 55.376 The rotation angle of the fid. point is -179.958256 plMakePlateFromTile : beginning loop over 1630 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8103.par makePlates : plateInfo struct for plate 2317 : (h4).mjd 53689 (h4).raCen 132.575 (h4).decCen 6.13713 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.575 6.137 132.575 7.637 plMakePlateFromTile : mjd of obs : 53689.921507 Observed HA/dec of plate center, fiducial point (deg) : -0.002 6.126 -0.003 7.626 The rotation angle of the fid. point is 0.030167 plMakePlateFromTile : beginning loop over 1659 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Oct 17 14:23:30 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2303.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 62 28 2 68 18 3 65 14 4 83 18 5 68 18 6 44 16 7 48 15 8 51 24 9 55 20 10 121 28 11 71 21 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5421 40 1 183 582 plFiberPlate : adding spectro-photo std with objId = 5421 40 1 181 517 plFiberPlate : adding spectro-photo std with objId = 5421 40 2 178 415 plFiberPlate : adding spectro-photo std with objId = 5421 40 2 177 278 plFiberPlate : adding spectro-photo std with objId = 5421 40 5 176 527 plFiberPlate : adding spectro-photo std with objId = 5421 40 5 176 442 plFiberPlate : adding spectro-photo std with objId = 5421 40 3 176 623 plFiberPlate : adding spectro-photo std with objId = 5421 40 3 176 450 plFiberPlate : 19 possible sky positions to use as objects from a possible 105. plFiberPlate : 11 possible sky positions to use as objects from a possible 104. plFiberPlate : 9 possible sky positions to use as objects from a possible 103. plFiberPlate : 4 possible sky positions to use as objects from a possible 102. plFiberPlate : 2 possible sky positions to use as objects from a possible 101. plFiberPlate : 8 possible sky positions to use as objects from a possible 100. plFiberPlate : 10 possible sky positions to use as objects from a possible 99. plFiberPlate : 12 possible sky positions to use as objects from a possible 98. plFiberPlate : 8 possible sky positions to use as objects from a possible 97. plFiberPlate : 9 possible sky positions to use as objects from a possible 96. plFiberPlate : 7 possible sky positions to use as objects from a possible 95. plFiberPlate : 6 possible sky positions to use as objects from a possible 94. plFiberPlate : 2 possible sky positions to use as objects from a possible 93. plFiberPlate : 0 possible sky positions to use as objects from a possible 92. plFiberPlate: No sky found for bundle at 76.276 -76.040, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 92. plFiberPlate: No sky found for bundle at 76.276 -76.040, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 92. plFiberPlate : 4 possible sky positions to use as objects from a possible 91. plFiberPlate : 9 possible sky positions to use as objects from a possible 90. plFiberPlate : 8 possible sky positions to use as objects from a possible 89. plFiberPlate : 9 possible sky positions to use as objects from a possible 88. plFiberPlate : 8 possible sky positions to use as objects from a possible 87. plFiberPlate : 5 possible sky positions to use as objects from a possible 86. plFiberPlate : 3 possible sky positions to use as objects from a possible 85. plFiberPlate : 1 possible sky positions to use as objects from a possible 84. plFiberPlate : 1 possible sky positions to use as objects from a possible 83. plFiberPlate : 7 possible sky positions to use as objects from a possible 82. plFiberPlate : 4 possible sky positions to use as objects from a possible 81. plFiberPlate : 8 possible sky positions to use as objects from a possible 80. plFiberPlate : 8 possible sky positions to use as objects from a possible 79. plFiberPlate : 6 possible sky positions to use as objects from a possible 78. plFiberPlate : 2 possible sky positions to use as objects from a possible 77. plFiberPlate : 2 possible sky positions to use as objects from a possible 76. plFiberPlate : 1 possible sky positions to use as objects from a possible 75. plFiberPlate : 8 possible sky positions to use as objects from a possible 74. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 715 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2303.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2303.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2304.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 170 2 10 119 3 9 128 4 6 167 5 5 167 6 6 120 7 5 131 8 5 159 9 2 173 10 16 247 11 13 170 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 177 53 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 180 110 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 172 55 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 171 72 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 170 7 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 169 94 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 169 43 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 167 47 plFiberPlate : 179 possible sky positions to use as objects from a possible 853. plFiberPlate : 133 possible sky positions to use as objects from a possible 852. plFiberPlate : 82 possible sky positions to use as objects from a possible 851. plFiberPlate : 52 possible sky positions to use as objects from a possible 850. plFiberPlate : 61 possible sky positions to use as objects from a possible 849. plFiberPlate : 50 possible sky positions to use as objects from a possible 848. plFiberPlate : 69 possible sky positions to use as objects from a possible 847. plFiberPlate : 124 possible sky positions to use as objects from a possible 846. plFiberPlate : 81 possible sky positions to use as objects from a possible 845. plFiberPlate : 51 possible sky positions to use as objects from a possible 844. plFiberPlate : 27 possible sky positions to use as objects from a possible 843. plFiberPlate : 21 possible sky positions to use as objects from a possible 842. plFiberPlate : 20 possible sky positions to use as objects from a possible 841. plFiberPlate : 21 possible sky positions to use as objects from a possible 840. plFiberPlate : 26 possible sky positions to use as objects from a possible 839. plFiberPlate : 21 possible sky positions to use as objects from a possible 838. plFiberPlate : 121 possible sky positions to use as objects from a possible 837. plFiberPlate : 80 possible sky positions to use as objects from a possible 836. plFiberPlate : 69 possible sky positions to use as objects from a possible 835. plFiberPlate : 51 possible sky positions to use as objects from a possible 834. plFiberPlate : 35 possible sky positions to use as objects from a possible 833. plFiberPlate : 27 possible sky positions to use as objects from a possible 832. plFiberPlate : 26 possible sky positions to use as objects from a possible 831. plFiberPlate : 33 possible sky positions to use as objects from a possible 830. plFiberPlate : 21 possible sky positions to use as objects from a possible 829. plFiberPlate : 62 possible sky positions to use as objects from a possible 828. plFiberPlate : 40 possible sky positions to use as objects from a possible 827. plFiberPlate : 26 possible sky positions to use as objects from a possible 826. plFiberPlate : 8 possible sky positions to use as objects from a possible 825. plFiberPlate : 35 possible sky positions to use as objects from a possible 824. plFiberPlate : 24 possible sky positions to use as objects from a possible 823. plFiberPlate : 18 possible sky positions to use as objects from a possible 822. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 728 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2303.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2304.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2304.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2305.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 320 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 41 166 2 35 117 3 30 103 4 40 149 5 17 183 6 12 122 7 14 115 8 13 156 9 12 173 10 60 208 11 48 164 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 40 2 90 97 plFiberPlate : adding spectro-photo std with objId = 1737 40 1 90 92 plFiberPlate : adding spectro-photo std with objId = 1737 40 5 82 239 plFiberPlate : adding spectro-photo std with objId = 1737 40 5 82 101 plFiberPlate : adding spectro-photo std with objId = 1737 40 4 82 136 plFiberPlate : adding spectro-photo std with objId = 1737 40 3 81 45 plFiberPlate : adding spectro-photo std with objId = 1737 40 4 80 207 plFiberPlate : adding spectro-photo std with objId = 1737 40 3 80 252 plFiberPlate : 160 possible sky positions to use as objects from a possible 812. plFiberPlate : 91 possible sky positions to use as objects from a possible 811. plFiberPlate : 67 possible sky positions to use as objects from a possible 810. plFiberPlate : 47 possible sky positions to use as objects from a possible 809. plFiberPlate : 45 possible sky positions to use as objects from a possible 808. plFiberPlate : 46 possible sky positions to use as objects from a possible 807. plFiberPlate : 55 possible sky positions to use as objects from a possible 806. plFiberPlate : 102 possible sky positions to use as objects from a possible 805. plFiberPlate : 89 possible sky positions to use as objects from a possible 804. plFiberPlate : 60 possible sky positions to use as objects from a possible 803. plFiberPlate : 42 possible sky positions to use as objects from a possible 802. plFiberPlate : 30 possible sky positions to use as objects from a possible 801. plFiberPlate : 24 possible sky positions to use as objects from a possible 800. plFiberPlate : 17 possible sky positions to use as objects from a possible 799. plFiberPlate : 25 possible sky positions to use as objects from a possible 798. plFiberPlate : 43 possible sky positions to use as objects from a possible 797. plFiberPlate : 105 possible sky positions to use as objects from a possible 796. plFiberPlate : 94 possible sky positions to use as objects from a possible 795. plFiberPlate : 73 possible sky positions to use as objects from a possible 794. plFiberPlate : 39 possible sky positions to use as objects from a possible 793. plFiberPlate : 12 possible sky positions to use as objects from a possible 792. plFiberPlate : 18 possible sky positions to use as objects from a possible 791. plFiberPlate : 18 possible sky positions to use as objects from a possible 790. plFiberPlate : 23 possible sky positions to use as objects from a possible 789. plFiberPlate : 31 possible sky positions to use as objects from a possible 788. plFiberPlate : 78 possible sky positions to use as objects from a possible 787. plFiberPlate : 63 possible sky positions to use as objects from a possible 786. plFiberPlate : 56 possible sky positions to use as objects from a possible 785. plFiberPlate : 16 possible sky positions to use as objects from a possible 784. plFiberPlate : 20 possible sky positions to use as objects from a possible 783. plFiberPlate : 22 possible sky positions to use as objects from a possible 782. plFiberPlate : 30 possible sky positions to use as objects from a possible 781. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 695 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2304.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2305.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2305.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2306.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 190 2 6 126 3 10 115 4 15 155 5 4 179 6 5 118 7 8 113 8 2 163 9 6 169 10 13 246 11 10 182 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 98 3 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 96 56 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 96 9 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 94 17 plFiberPlate : adding spectro-photo std with objId = 5065 40 1 90 88 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 88 94 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 88 8 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 87 115 plFiberPlate : 189 possible sky positions to use as objects from a possible 861. plFiberPlate : 121 possible sky positions to use as objects from a possible 860. plFiberPlate : 72 possible sky positions to use as objects from a possible 859. plFiberPlate : 47 possible sky positions to use as objects from a possible 858. plFiberPlate : 39 possible sky positions to use as objects from a possible 857. plFiberPlate : 75 possible sky positions to use as objects from a possible 856. plFiberPlate : 52 possible sky positions to use as objects from a possible 855. plFiberPlate : 122 possible sky positions to use as objects from a possible 854. plFiberPlate : 91 possible sky positions to use as objects from a possible 853. plFiberPlate : 69 possible sky positions to use as objects from a possible 852. plFiberPlate : 34 possible sky positions to use as objects from a possible 851. plFiberPlate : 25 possible sky positions to use as objects from a possible 850. plFiberPlate : 14 possible sky positions to use as objects from a possible 849. plFiberPlate : 21 possible sky positions to use as objects from a possible 848. plFiberPlate : 26 possible sky positions to use as objects from a possible 847. plFiberPlate : 32 possible sky positions to use as objects from a possible 846. plFiberPlate : 114 possible sky positions to use as objects from a possible 845. plFiberPlate : 76 possible sky positions to use as objects from a possible 844. plFiberPlate : 50 possible sky positions to use as objects from a possible 843. plFiberPlate : 28 possible sky positions to use as objects from a possible 842. plFiberPlate : 32 possible sky positions to use as objects from a possible 841. plFiberPlate : 15 possible sky positions to use as objects from a possible 840. plFiberPlate : 35 possible sky positions to use as objects from a possible 839. plFiberPlate : 16 possible sky positions to use as objects from a possible 838. plFiberPlate : 25 possible sky positions to use as objects from a possible 837. plFiberPlate : 53 possible sky positions to use as objects from a possible 836. plFiberPlate : 51 possible sky positions to use as objects from a possible 835. plFiberPlate : 22 possible sky positions to use as objects from a possible 834. plFiberPlate : 20 possible sky positions to use as objects from a possible 833. plFiberPlate : 22 possible sky positions to use as objects from a possible 832. plFiberPlate : 15 possible sky positions to use as objects from a possible 831. plFiberPlate : 14 possible sky positions to use as objects from a possible 830. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 725 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2305.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2306.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2306.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2307.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 187 2 15 120 3 16 115 4 15 152 5 1 193 6 2 130 7 6 112 8 9 163 9 1 184 10 25 228 11 19 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5714 40 1 173 77 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 183 54 plFiberPlate : adding spectro-photo std with objId = 5065 40 1 181 38 plFiberPlate : adding spectro-photo std with objId = 5065 40 4 179 34 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 176 8 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 169 84 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 169 77 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 167 51 plFiberPlate : 186 possible sky positions to use as objects from a possible 849. plFiberPlate : 116 possible sky positions to use as objects from a possible 848. plFiberPlate : 80 possible sky positions to use as objects from a possible 847. plFiberPlate : 44 possible sky positions to use as objects from a possible 846. plFiberPlate : 41 possible sky positions to use as objects from a possible 845. plFiberPlate : 41 possible sky positions to use as objects from a possible 844. plFiberPlate : 70 possible sky positions to use as objects from a possible 843. plFiberPlate : 104 possible sky positions to use as objects from a possible 842. plFiberPlate : 76 possible sky positions to use as objects from a possible 841. plFiberPlate : 52 possible sky positions to use as objects from a possible 840. plFiberPlate : 33 possible sky positions to use as objects from a possible 839. plFiberPlate : 26 possible sky positions to use as objects from a possible 838. plFiberPlate : 29 possible sky positions to use as objects from a possible 837. plFiberPlate : 20 possible sky positions to use as objects from a possible 836. plFiberPlate : 22 possible sky positions to use as objects from a possible 835. plFiberPlate : 21 possible sky positions to use as objects from a possible 834. plFiberPlate : 110 possible sky positions to use as objects from a possible 833. plFiberPlate : 105 possible sky positions to use as objects from a possible 832. plFiberPlate : 63 possible sky positions to use as objects from a possible 831. plFiberPlate : 39 possible sky positions to use as objects from a possible 830. plFiberPlate : 47 possible sky positions to use as objects from a possible 829. plFiberPlate : 16 possible sky positions to use as objects from a possible 828. plFiberPlate : 19 possible sky positions to use as objects from a possible 827. plFiberPlate : 31 possible sky positions to use as objects from a possible 826. plFiberPlate : 22 possible sky positions to use as objects from a possible 825. plFiberPlate : 85 possible sky positions to use as objects from a possible 824. plFiberPlate : 59 possible sky positions to use as objects from a possible 823. plFiberPlate : 23 possible sky positions to use as objects from a possible 822. plFiberPlate : 23 possible sky positions to use as objects from a possible 821. plFiberPlate : 18 possible sky positions to use as objects from a possible 820. plFiberPlate : 17 possible sky positions to use as objects from a possible 819. plFiberPlate : 10 possible sky positions to use as objects from a possible 818. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2306.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2307.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2307.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2308.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 164 2 21 115 3 24 103 4 23 139 5 26 167 6 20 107 7 12 111 8 8 161 9 13 168 10 40 195 11 34 151 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5640 40 6 182 182 plFiberPlate : adding spectro-photo std with objId = 5655 40 6 175 52 plFiberPlate : adding spectro-photo std with objId = 5655 40 5 173 36 plFiberPlate : adding spectro-photo std with objId = 5655 40 5 172 88 plFiberPlate : adding spectro-photo std with objId = 5655 40 2 172 234 plFiberPlate : adding spectro-photo std with objId = 5655 40 3 169 70 plFiberPlate : adding spectro-photo std with objId = 5655 40 2 168 181 plFiberPlate : adding spectro-photo std with objId = 5655 40 4 166 137 plFiberPlate : 143 possible sky positions to use as objects from a possible 786. plFiberPlate : 93 possible sky positions to use as objects from a possible 785. plFiberPlate : 54 possible sky positions to use as objects from a possible 784. plFiberPlate : 32 possible sky positions to use as objects from a possible 783. plFiberPlate : 48 possible sky positions to use as objects from a possible 782. plFiberPlate : 48 possible sky positions to use as objects from a possible 781. plFiberPlate : 56 possible sky positions to use as objects from a possible 780. plFiberPlate : 102 possible sky positions to use as objects from a possible 779. plFiberPlate : 93 possible sky positions to use as objects from a possible 778. plFiberPlate : 68 possible sky positions to use as objects from a possible 777. plFiberPlate : 33 possible sky positions to use as objects from a possible 776. plFiberPlate : 25 possible sky positions to use as objects from a possible 775. plFiberPlate : 19 possible sky positions to use as objects from a possible 774. plFiberPlate : 40 possible sky positions to use as objects from a possible 773. plFiberPlate : 33 possible sky positions to use as objects from a possible 772. plFiberPlate : 16 possible sky positions to use as objects from a possible 771. plFiberPlate : 115 possible sky positions to use as objects from a possible 770. plFiberPlate : 78 possible sky positions to use as objects from a possible 769. plFiberPlate : 59 possible sky positions to use as objects from a possible 768. plFiberPlate : 40 possible sky positions to use as objects from a possible 767. plFiberPlate : 27 possible sky positions to use as objects from a possible 766. plFiberPlate : 20 possible sky positions to use as objects from a possible 765. plFiberPlate : 25 possible sky positions to use as objects from a possible 764. plFiberPlate : 20 possible sky positions to use as objects from a possible 763. plFiberPlate : 25 possible sky positions to use as objects from a possible 762. plFiberPlate : 57 possible sky positions to use as objects from a possible 761. plFiberPlate : 46 possible sky positions to use as objects from a possible 760. plFiberPlate : 37 possible sky positions to use as objects from a possible 759. plFiberPlate : 19 possible sky positions to use as objects from a possible 758. plFiberPlate : 14 possible sky positions to use as objects from a possible 757. plFiberPlate : 25 possible sky positions to use as objects from a possible 756. plFiberPlate : 22 possible sky positions to use as objects from a possible 755. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 746 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2307.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2308.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2308.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2309.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 662 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 172 2 21 126 3 21 110 4 22 148 5 23 174 6 13 127 7 6 124 8 6 172 9 17 181 10 42 232 11 32 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 40 4 81 136 plFiberPlate : adding spectro-photo std with objId = 2576 40 3 80 34 plFiberPlate : adding spectro-photo std with objId = 2576 40 5 78 142 plFiberPlate : adding spectro-photo std with objId = 2576 40 3 78 118 plFiberPlate : adding spectro-photo std with objId = 2576 40 1 72 99 plFiberPlate : adding spectro-photo std with objId = 2576 40 2 68 142 plFiberPlate : adding spectro-photo std with objId = 2576 40 6 67 90 plFiberPlate : adding spectro-photo std with objId = 2576 40 5 67 42 plFiberPlate : 156 possible sky positions to use as objects from a possible 845. plFiberPlate : 137 possible sky positions to use as objects from a possible 844. plFiberPlate : 93 possible sky positions to use as objects from a possible 843. plFiberPlate : 45 possible sky positions to use as objects from a possible 842. plFiberPlate : 42 possible sky positions to use as objects from a possible 841. plFiberPlate : 52 possible sky positions to use as objects from a possible 840. plFiberPlate : 46 possible sky positions to use as objects from a possible 839. plFiberPlate : 99 possible sky positions to use as objects from a possible 838. plFiberPlate : 73 possible sky positions to use as objects from a possible 837. plFiberPlate : 50 possible sky positions to use as objects from a possible 836. plFiberPlate : 27 possible sky positions to use as objects from a possible 835. plFiberPlate : 19 possible sky positions to use as objects from a possible 834. plFiberPlate : 28 possible sky positions to use as objects from a possible 833. plFiberPlate : 13 possible sky positions to use as objects from a possible 832. plFiberPlate : 23 possible sky positions to use as objects from a possible 831. plFiberPlate : 25 possible sky positions to use as objects from a possible 830. plFiberPlate : 104 possible sky positions to use as objects from a possible 829. plFiberPlate : 81 possible sky positions to use as objects from a possible 828. plFiberPlate : 50 possible sky positions to use as objects from a possible 827. plFiberPlate : 27 possible sky positions to use as objects from a possible 826. plFiberPlate : 29 possible sky positions to use as objects from a possible 825. plFiberPlate : 14 possible sky positions to use as objects from a possible 824. plFiberPlate : 30 possible sky positions to use as objects from a possible 823. plFiberPlate : 21 possible sky positions to use as objects from a possible 822. plFiberPlate : 7 possible sky positions to use as objects from a possible 821. plFiberPlate : 63 possible sky positions to use as objects from a possible 820. plFiberPlate : 66 possible sky positions to use as objects from a possible 819. plFiberPlate : 37 possible sky positions to use as objects from a possible 818. plFiberPlate : 21 possible sky positions to use as objects from a possible 817. plFiberPlate : 27 possible sky positions to use as objects from a possible 816. plFiberPlate : 24 possible sky positions to use as objects from a possible 815. plFiberPlate : 20 possible sky positions to use as objects from a possible 814. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 696 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2308.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2309.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2309.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2310.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 324 2 16 217 3 9 201 4 17 244 5 9 296 6 10 204 7 4 222 8 1 306 9 4 320 10 30 422 11 24 315 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5655 40 3 260 23 plFiberPlate : adding spectro-photo std with objId = 5655 40 1 259 198 plFiberPlate : adding spectro-photo std with objId = 5655 40 5 258 221 plFiberPlate : adding spectro-photo std with objId = 5655 40 6 254 48 plFiberPlate : adding spectro-photo std with objId = 5655 40 4 253 4 plFiberPlate : adding spectro-photo std with objId = 5655 40 3 251 209 plFiberPlate : adding spectro-photo std with objId = 5655 40 1 251 100 plFiberPlate : adding spectro-photo std with objId = 5655 40 6 249 111 plFiberPlate : 297 possible sky positions to use as objects from a possible 1486. plFiberPlate : 208 possible sky positions to use as objects from a possible 1485. plFiberPlate : 120 possible sky positions to use as objects from a possible 1484. plFiberPlate : 152 possible sky positions to use as objects from a possible 1483. plFiberPlate : 60 possible sky positions to use as objects from a possible 1482. plFiberPlate : 64 possible sky positions to use as objects from a possible 1481. plFiberPlate : 90 possible sky positions to use as objects from a possible 1480. plFiberPlate : 201 possible sky positions to use as objects from a possible 1479. plFiberPlate : 166 possible sky positions to use as objects from a possible 1478. plFiberPlate : 123 possible sky positions to use as objects from a possible 1477. plFiberPlate : 92 possible sky positions to use as objects from a possible 1476. plFiberPlate : 56 possible sky positions to use as objects from a possible 1475. plFiberPlate : 44 possible sky positions to use as objects from a possible 1474. plFiberPlate : 44 possible sky positions to use as objects from a possible 1473. plFiberPlate : 68 possible sky positions to use as objects from a possible 1472. plFiberPlate : 27 possible sky positions to use as objects from a possible 1471. plFiberPlate : 201 possible sky positions to use as objects from a possible 1470. plFiberPlate : 159 possible sky positions to use as objects from a possible 1469. plFiberPlate : 102 possible sky positions to use as objects from a possible 1468. plFiberPlate : 73 possible sky positions to use as objects from a possible 1467. plFiberPlate : 28 possible sky positions to use as objects from a possible 1466. plFiberPlate : 44 possible sky positions to use as objects from a possible 1465. plFiberPlate : 39 possible sky positions to use as objects from a possible 1464. plFiberPlate : 56 possible sky positions to use as objects from a possible 1463. plFiberPlate : 42 possible sky positions to use as objects from a possible 1462. plFiberPlate : 126 possible sky positions to use as objects from a possible 1461. plFiberPlate : 121 possible sky positions to use as objects from a possible 1460. plFiberPlate : 70 possible sky positions to use as objects from a possible 1459. plFiberPlate : 49 possible sky positions to use as objects from a possible 1458. plFiberPlate : 66 possible sky positions to use as objects from a possible 1457. plFiberPlate : 39 possible sky positions to use as objects from a possible 1456. plFiberPlate : 44 possible sky positions to use as objects from a possible 1455. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 714 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2309.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2310.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2310.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2311.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 196 2 4 130 3 6 113 4 7 166 5 6 194 6 6 122 7 3 123 8 2 169 9 6 188 10 12 239 11 7 175 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1891 40 5 72 22 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 65 12 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 64 88 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 61 6 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 60 23 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 59 29 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 58 53 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 57 33 plFiberPlate : 186 possible sky positions to use as objects from a possible 888. plFiberPlate : 109 possible sky positions to use as objects from a possible 887. plFiberPlate : 76 possible sky positions to use as objects from a possible 886. plFiberPlate : 41 possible sky positions to use as objects from a possible 885. plFiberPlate : 57 possible sky positions to use as objects from a possible 884. plFiberPlate : 49 possible sky positions to use as objects from a possible 883. plFiberPlate : 76 possible sky positions to use as objects from a possible 882. plFiberPlate : 125 possible sky positions to use as objects from a possible 881. plFiberPlate : 85 possible sky positions to use as objects from a possible 880. plFiberPlate : 50 possible sky positions to use as objects from a possible 879. plFiberPlate : 28 possible sky positions to use as objects from a possible 878. plFiberPlate : 27 possible sky positions to use as objects from a possible 877. plFiberPlate : 27 possible sky positions to use as objects from a possible 876. plFiberPlate : 26 possible sky positions to use as objects from a possible 875. plFiberPlate : 19 possible sky positions to use as objects from a possible 874. plFiberPlate : 25 possible sky positions to use as objects from a possible 873. plFiberPlate : 117 possible sky positions to use as objects from a possible 872. plFiberPlate : 77 possible sky positions to use as objects from a possible 871. plFiberPlate : 49 possible sky positions to use as objects from a possible 870. plFiberPlate : 36 possible sky positions to use as objects from a possible 869. plFiberPlate : 23 possible sky positions to use as objects from a possible 868. plFiberPlate : 7 possible sky positions to use as objects from a possible 867. plFiberPlate : 35 possible sky positions to use as objects from a possible 866. plFiberPlate : 24 possible sky positions to use as objects from a possible 865. plFiberPlate : 31 possible sky positions to use as objects from a possible 864. plFiberPlate : 73 possible sky positions to use as objects from a possible 863. plFiberPlate : 59 possible sky positions to use as objects from a possible 862. plFiberPlate : 37 possible sky positions to use as objects from a possible 861. plFiberPlate : 23 possible sky positions to use as objects from a possible 860. plFiberPlate : 25 possible sky positions to use as objects from a possible 859. plFiberPlate : 18 possible sky positions to use as objects from a possible 858. plFiberPlate : 20 possible sky positions to use as objects from a possible 857. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 686 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2310.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2311.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2311.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2312.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 271 2 9 190 3 7 182 4 10 225 5 3 262 6 4 164 7 5 149 8 11 234 9 9 250 10 13 349 11 14 255 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 51 46 plFiberPlate : adding spectro-photo std with objId = 5656 40 4 81 21 plFiberPlate : adding spectro-photo std with objId = 5656 40 4 75 78 plFiberPlate : adding spectro-photo std with objId = 5656 40 2 71 55 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 48 7 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 52 42 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 52 11 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 57 66 plFiberPlate : 256 possible sky positions to use as objects from a possible 1229. plFiberPlate : 184 possible sky positions to use as objects from a possible 1228. plFiberPlate : 134 possible sky positions to use as objects from a possible 1227. plFiberPlate : 103 possible sky positions to use as objects from a possible 1226. plFiberPlate : 51 possible sky positions to use as objects from a possible 1225. plFiberPlate : 79 possible sky positions to use as objects from a possible 1224. plFiberPlate : 70 possible sky positions to use as objects from a possible 1223. plFiberPlate : 151 possible sky positions to use as objects from a possible 1222. plFiberPlate : 127 possible sky positions to use as objects from a possible 1221. plFiberPlate : 92 possible sky positions to use as objects from a possible 1220. plFiberPlate : 58 possible sky positions to use as objects from a possible 1219. plFiberPlate : 46 possible sky positions to use as objects from a possible 1218. plFiberPlate : 35 possible sky positions to use as objects from a possible 1217. plFiberPlate : 39 possible sky positions to use as objects from a possible 1216. plFiberPlate : 24 possible sky positions to use as objects from a possible 1215. plFiberPlate : 39 possible sky positions to use as objects from a possible 1214. plFiberPlate : 186 possible sky positions to use as objects from a possible 1213. plFiberPlate : 154 possible sky positions to use as objects from a possible 1212. plFiberPlate : 117 possible sky positions to use as objects from a possible 1211. plFiberPlate : 82 possible sky positions to use as objects from a possible 1210. plFiberPlate : 29 possible sky positions to use as objects from a possible 1209. plFiberPlate : 30 possible sky positions to use as objects from a possible 1208. plFiberPlate : 37 possible sky positions to use as objects from a possible 1207. plFiberPlate : 30 possible sky positions to use as objects from a possible 1206. plFiberPlate : 45 possible sky positions to use as objects from a possible 1205. plFiberPlate : 98 possible sky positions to use as objects from a possible 1204. plFiberPlate : 67 possible sky positions to use as objects from a possible 1203. plFiberPlate : 51 possible sky positions to use as objects from a possible 1202. plFiberPlate : 25 possible sky positions to use as objects from a possible 1201. plFiberPlate : 31 possible sky positions to use as objects from a possible 1200. plFiberPlate : 29 possible sky positions to use as objects from a possible 1199. plFiberPlate : 16 possible sky positions to use as objects from a possible 1198. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 714 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2311.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2312.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2312.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2313.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 191 2 2 130 3 5 122 4 9 155 5 1 177 6 0 120 7 1 125 8 2 178 9 1 181 10 10 238 11 7 174 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 228 5 plFiberPlate : adding spectro-photo std with objId = 3325 41 1 225 65 plFiberPlate : adding spectro-photo std with objId = 3325 41 1 221 75 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 220 167 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 220 58 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 219 45 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 219 50 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 218 48 plFiberPlate : 176 possible sky positions to use as objects from a possible 876. plFiberPlate : 134 possible sky positions to use as objects from a possible 875. plFiberPlate : 94 possible sky positions to use as objects from a possible 874. plFiberPlate : 63 possible sky positions to use as objects from a possible 873. plFiberPlate : 84 possible sky positions to use as objects from a possible 872. plFiberPlate : 34 possible sky positions to use as objects from a possible 871. plFiberPlate : 66 possible sky positions to use as objects from a possible 870. plFiberPlate : 121 possible sky positions to use as objects from a possible 869. plFiberPlate : 97 possible sky positions to use as objects from a possible 868. plFiberPlate : 70 possible sky positions to use as objects from a possible 867. plFiberPlate : 48 possible sky positions to use as objects from a possible 866. plFiberPlate : 29 possible sky positions to use as objects from a possible 865. plFiberPlate : 20 possible sky positions to use as objects from a possible 864. plFiberPlate : 28 possible sky positions to use as objects from a possible 863. plFiberPlate : 16 possible sky positions to use as objects from a possible 862. plFiberPlate : 36 possible sky positions to use as objects from a possible 861. plFiberPlate : 127 possible sky positions to use as objects from a possible 860. plFiberPlate : 103 possible sky positions to use as objects from a possible 859. plFiberPlate : 75 possible sky positions to use as objects from a possible 858. plFiberPlate : 39 possible sky positions to use as objects from a possible 857. plFiberPlate : 19 possible sky positions to use as objects from a possible 856. plFiberPlate : 33 possible sky positions to use as objects from a possible 855. plFiberPlate : 26 possible sky positions to use as objects from a possible 854. plFiberPlate : 28 possible sky positions to use as objects from a possible 853. plFiberPlate : 24 possible sky positions to use as objects from a possible 852. plFiberPlate : 73 possible sky positions to use as objects from a possible 851. plFiberPlate : 51 possible sky positions to use as objects from a possible 850. plFiberPlate : 42 possible sky positions to use as objects from a possible 849. plFiberPlate : 18 possible sky positions to use as objects from a possible 848. plFiberPlate : 27 possible sky positions to use as objects from a possible 847. plFiberPlate : 33 possible sky positions to use as objects from a possible 846. plFiberPlate : 18 possible sky positions to use as objects from a possible 845. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 686 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2312.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2313.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2313.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2314.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 188 2 9 124 3 12 109 4 8 157 5 6 183 6 4 121 7 3 119 8 1 177 9 3 181 10 17 234 11 10 179 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 135 67 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 132 20 plFiberPlate : adding spectro-photo std with objId = 5656 40 4 157 86 plFiberPlate : adding spectro-photo std with objId = 5656 40 5 155 14 plFiberPlate : adding spectro-photo std with objId = 5656 40 1 152 67 plFiberPlate : adding spectro-photo std with objId = 5656 40 2 149 102 plFiberPlate : adding spectro-photo std with objId = 5656 40 1 154 10 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 140 7 plFiberPlate : 180 possible sky positions to use as objects from a possible 871. plFiberPlate : 132 possible sky positions to use as objects from a possible 870. plFiberPlate : 96 possible sky positions to use as objects from a possible 869. plFiberPlate : 40 possible sky positions to use as objects from a possible 868. plFiberPlate : 82 possible sky positions to use as objects from a possible 867. plFiberPlate : 29 possible sky positions to use as objects from a possible 866. plFiberPlate : 69 possible sky positions to use as objects from a possible 865. plFiberPlate : 107 possible sky positions to use as objects from a possible 864. plFiberPlate : 73 possible sky positions to use as objects from a possible 863. plFiberPlate : 54 possible sky positions to use as objects from a possible 862. plFiberPlate : 26 possible sky positions to use as objects from a possible 861. plFiberPlate : 32 possible sky positions to use as objects from a possible 860. plFiberPlate : 25 possible sky positions to use as objects from a possible 859. plFiberPlate : 18 possible sky positions to use as objects from a possible 858. plFiberPlate : 30 possible sky positions to use as objects from a possible 857. plFiberPlate : 16 possible sky positions to use as objects from a possible 856. plFiberPlate : 123 possible sky positions to use as objects from a possible 855. plFiberPlate : 85 possible sky positions to use as objects from a possible 854. plFiberPlate : 53 possible sky positions to use as objects from a possible 853. plFiberPlate : 37 possible sky positions to use as objects from a possible 852. plFiberPlate : 31 possible sky positions to use as objects from a possible 851. plFiberPlate : 26 possible sky positions to use as objects from a possible 850. plFiberPlate : 18 possible sky positions to use as objects from a possible 849. plFiberPlate : 28 possible sky positions to use as objects from a possible 848. plFiberPlate : 24 possible sky positions to use as objects from a possible 847. plFiberPlate : 60 possible sky positions to use as objects from a possible 846. plFiberPlate : 48 possible sky positions to use as objects from a possible 845. plFiberPlate : 30 possible sky positions to use as objects from a possible 844. plFiberPlate : 22 possible sky positions to use as objects from a possible 843. plFiberPlate : 14 possible sky positions to use as objects from a possible 842. plFiberPlate : 15 possible sky positions to use as objects from a possible 841. plFiberPlate : 22 possible sky positions to use as objects from a possible 840. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2313.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2314.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2314.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2315.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 155 2 8 114 3 13 130 4 11 160 5 9 175 6 8 131 7 12 139 8 17 158 9 16 180 10 18 225 11 15 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 114 142 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 113 71 plFiberPlate : adding spectro-photo std with objId = 4335 40 1 113 153 plFiberPlate : adding spectro-photo std with objId = 4335 40 6 110 97 plFiberPlate : adding spectro-photo std with objId = 4335 40 6 109 194 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 108 161 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 108 9 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 107 139 plFiberPlate : 168 possible sky positions to use as objects from a possible 844. plFiberPlate : 125 possible sky positions to use as objects from a possible 843. plFiberPlate : 87 possible sky positions to use as objects from a possible 842. plFiberPlate : 41 possible sky positions to use as objects from a possible 841. plFiberPlate : 34 possible sky positions to use as objects from a possible 840. plFiberPlate : 39 possible sky positions to use as objects from a possible 839. plFiberPlate : 77 possible sky positions to use as objects from a possible 838. plFiberPlate : 114 possible sky positions to use as objects from a possible 837. plFiberPlate : 100 possible sky positions to use as objects from a possible 836. plFiberPlate : 82 possible sky positions to use as objects from a possible 835. plFiberPlate : 50 possible sky positions to use as objects from a possible 834. plFiberPlate : 22 possible sky positions to use as objects from a possible 833. plFiberPlate : 20 possible sky positions to use as objects from a possible 832. plFiberPlate : 22 possible sky positions to use as objects from a possible 831. plFiberPlate : 31 possible sky positions to use as objects from a possible 830. plFiberPlate : 31 possible sky positions to use as objects from a possible 829. plFiberPlate : 108 possible sky positions to use as objects from a possible 828. plFiberPlate : 89 possible sky positions to use as objects from a possible 827. plFiberPlate : 64 possible sky positions to use as objects from a possible 826. plFiberPlate : 36 possible sky positions to use as objects from a possible 825. plFiberPlate : 26 possible sky positions to use as objects from a possible 824. plFiberPlate : 34 possible sky positions to use as objects from a possible 823. plFiberPlate : 17 possible sky positions to use as objects from a possible 822. plFiberPlate : 30 possible sky positions to use as objects from a possible 821. plFiberPlate : 13 possible sky positions to use as objects from a possible 820. plFiberPlate : 76 possible sky positions to use as objects from a possible 819. plFiberPlate : 65 possible sky positions to use as objects from a possible 818. plFiberPlate : 31 possible sky positions to use as objects from a possible 817. plFiberPlate : 22 possible sky positions to use as objects from a possible 816. plFiberPlate : 33 possible sky positions to use as objects from a possible 815. plFiberPlate : 17 possible sky positions to use as objects from a possible 814. plFiberPlate : 30 possible sky positions to use as objects from a possible 813. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 754 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2314.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2315.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2315.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2316.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 658 to list of science objects plFiberPlate : adding sky number 751 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 153 2 11 130 3 19 139 4 27 155 5 24 138 6 21 123 7 17 130 8 22 158 9 25 166 10 29 244 11 20 165 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 180 130 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 179 41 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 178 85 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 172 152 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 170 172 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 169 30 plFiberPlate : adding spectro-photo std with objId = 1350 40 3 168 83 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 167 127 plFiberPlate : 177 possible sky positions to use as objects from a possible 823. plFiberPlate : 128 possible sky positions to use as objects from a possible 822. plFiberPlate : 91 possible sky positions to use as objects from a possible 821. plFiberPlate : 67 possible sky positions to use as objects from a possible 820. plFiberPlate : 33 possible sky positions to use as objects from a possible 819. plFiberPlate : 30 possible sky positions to use as objects from a possible 818. plFiberPlate : 75 possible sky positions to use as objects from a possible 817. plFiberPlate : 139 possible sky positions to use as objects from a possible 816. plFiberPlate : 107 possible sky positions to use as objects from a possible 815. plFiberPlate : 96 possible sky positions to use as objects from a possible 814. plFiberPlate : 56 possible sky positions to use as objects from a possible 813. plFiberPlate : 36 possible sky positions to use as objects from a possible 812. plFiberPlate : 33 possible sky positions to use as objects from a possible 811. plFiberPlate : 22 possible sky positions to use as objects from a possible 810. plFiberPlate : 18 possible sky positions to use as objects from a possible 809. plFiberPlate : 38 possible sky positions to use as objects from a possible 808. plFiberPlate : 90 possible sky positions to use as objects from a possible 807. plFiberPlate : 74 possible sky positions to use as objects from a possible 806. plFiberPlate : 42 possible sky positions to use as objects from a possible 805. plFiberPlate : 32 possible sky positions to use as objects from a possible 804. plFiberPlate : 20 possible sky positions to use as objects from a possible 803. plFiberPlate : 13 possible sky positions to use as objects from a possible 802. plFiberPlate : 28 possible sky positions to use as objects from a possible 801. plFiberPlate : 13 possible sky positions to use as objects from a possible 800. plFiberPlate : 28 possible sky positions to use as objects from a possible 799. plFiberPlate : 57 possible sky positions to use as objects from a possible 798. plFiberPlate : 45 possible sky positions to use as objects from a possible 797. plFiberPlate : 30 possible sky positions to use as objects from a possible 796. plFiberPlate : 23 possible sky positions to use as objects from a possible 795. plFiberPlate : 25 possible sky positions to use as objects from a possible 794. plFiberPlate : 18 possible sky positions to use as objects from a possible 793. plFiberPlate : 15 possible sky positions to use as objects from a possible 792. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 717 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2315.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2316.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2316.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2317.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 162 2 12 127 3 16 116 4 21 148 5 13 162 6 13 104 7 12 116 8 11 164 9 12 169 10 34 219 11 26 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 86 119 plFiberPlate : adding spectro-photo std with objId = 3031 40 1 80 144 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 79 29 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 79 156 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 78 32 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 77 105 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 77 149 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 76 75 plFiberPlate : 157 possible sky positions to use as objects from a possible 799. plFiberPlate : 138 possible sky positions to use as objects from a possible 798. plFiberPlate : 89 possible sky positions to use as objects from a possible 797. plFiberPlate : 56 possible sky positions to use as objects from a possible 796. plFiberPlate : 72 possible sky positions to use as objects from a possible 795. plFiberPlate : 43 possible sky positions to use as objects from a possible 794. plFiberPlate : 49 possible sky positions to use as objects from a possible 793. plFiberPlate : 106 possible sky positions to use as objects from a possible 792. plFiberPlate : 78 possible sky positions to use as objects from a possible 791. plFiberPlate : 55 possible sky positions to use as objects from a possible 790. plFiberPlate : 28 possible sky positions to use as objects from a possible 789. plFiberPlate : 17 possible sky positions to use as objects from a possible 788. plFiberPlate : 15 possible sky positions to use as objects from a possible 787. plFiberPlate : 28 possible sky positions to use as objects from a possible 786. plFiberPlate : 19 possible sky positions to use as objects from a possible 785. plFiberPlate : 16 possible sky positions to use as objects from a possible 784. plFiberPlate : 93 possible sky positions to use as objects from a possible 783. plFiberPlate : 57 possible sky positions to use as objects from a possible 782. plFiberPlate : 44 possible sky positions to use as objects from a possible 781. plFiberPlate : 25 possible sky positions to use as objects from a possible 780. plFiberPlate : 27 possible sky positions to use as objects from a possible 779. plFiberPlate : 17 possible sky positions to use as objects from a possible 778. plFiberPlate : 29 possible sky positions to use as objects from a possible 777. plFiberPlate : 23 possible sky positions to use as objects from a possible 776. plFiberPlate : 16 possible sky positions to use as objects from a possible 775. plFiberPlate : 64 possible sky positions to use as objects from a possible 774. plFiberPlate : 57 possible sky positions to use as objects from a possible 773. plFiberPlate : 25 possible sky positions to use as objects from a possible 772. plFiberPlate : 15 possible sky positions to use as objects from a possible 771. plFiberPlate : 22 possible sky positions to use as objects from a possible 770. plFiberPlate : 22 possible sky positions to use as objects from a possible 769. plFiberPlate : 28 possible sky positions to use as objects from a possible 768. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 760 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2316.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2317.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2317.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Oct 17 14:24:08 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 53 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2303.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2303.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2303.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 66 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2304.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2304.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2304.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 33 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2305.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2305.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2305.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 63 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2306.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2306.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2306.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2307.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2307.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2307.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 84 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2308.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2308.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2308.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 34 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2309.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2309.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2309.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 52 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2310.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2310.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2310.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 24 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2311.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2311.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2311.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 52 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2312.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2312.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2312.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 24 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2313.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2313.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2313.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2314.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2314.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2314.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 92 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2315.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2315.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2315.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 55 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2316.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2316.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2316.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.3029,-10.7512) and (2.28,-12.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 98 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2317.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2317.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2317.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Oct 17 14:24:55 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa391974 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2303 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 715 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2304 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 728 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2305 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 695 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2306 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 725 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2307 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2308 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 746 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2309 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 696 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2310 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 714 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2311 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 686 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2312 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 714 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2313 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 686 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2314 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2315 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 754 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2316 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 717 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2317 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 760 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Oct 17 14:25:17 CDT 2005 Begin running "plateEnder dr2005.10.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.10.1 -morePipes 1" failed. PS: Read file for stderr output of this job. Sender: LSF System Subject: Job 64809: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Oct 17 17:10:33 2005 Results reported at Mon Oct 17 17:14:12 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.10.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 165.21 sec. Max Memory : 12 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Oct 17 17:10:41 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Oct 17 17:10:54 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_83/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Mon Oct 17 17:10:54 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_83/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Mon Oct 17 17:10:54 CDT 2005 Begin running plate --------------------------------------------------------------- Mon Oct 17 17:10:54 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9e662f4 makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8089.par makePlates : plateInfo struct for plate 2303 : (h4).mjd 53689 (h4).raCen 301.863 (h4).decCen -11.457 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 301.863 -11.457 301.863 -9.957 plMakePlateFromTile : mjd of obs : 53689.393203 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -11.425 0.001 -9.926 The rotation angle of the fid. point is -0.028756 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8090.par makePlates : plateInfo struct for plate 2304 : (h4).mjd 53689 (h4).raCen 139.892 (h4).decCen 22.1699 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.892 22.170 139.892 23.670 plMakePlateFromTile : mjd of obs : 53689.941793 Observed HA/dec of plate center, fiducial point (deg) : -0.002 22.149 -0.003 23.649 The rotation angle of the fid. point is 0.035721 plMakePlateFromTile : beginning loop over 1587 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8091.par makePlates : plateInfo struct for plate 2305 : (h4).mjd 53689 (h4).raCen 320.562 (h4).decCen -7.17568 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 320.562 -7.176 320.562 -5.676 plMakePlateFromTile : mjd of obs : 53689.444999 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -7.138 0.001 -5.638 The rotation angle of the fid. point is -0.022424 plMakePlateFromTile : beginning loop over 1678 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8092.par makePlates : plateInfo struct for plate 2306 : (h4).mjd 53689 (h4).raCen 33.2045 (h4).decCen 6.618 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 33.205 6.618 33.205 8.118 plMakePlateFromTile : mjd of obs : 53689.646239 Observed HA/dec of plate center, fiducial point (deg) : -0.002 6.656 -0.003 8.156 The rotation angle of the fid. point is 0.020997 plMakePlateFromTile : beginning loop over 1579 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8093.par makePlates : plateInfo struct for plate 2307 : (h4).mjd 53689 (h4).raCen 45.2426 (h4).decCen 5.7385 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 45.243 5.739 45.243 7.239 plMakePlateFromTile : mjd of obs : 53689.679589 Observed HA/dec of plate center, fiducial point (deg) : -0.002 5.773 -0.003 7.272 The rotation angle of the fid. point is 0.026360 plMakePlateFromTile : beginning loop over 1588 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8094.par makePlates : plateInfo struct for plate 2308 : (h4).mjd 53689 (h4).raCen 332.778 (h4).decCen 6.35524 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.778 6.355 332.778 7.855 plMakePlateFromTile : mjd of obs : 53689.478830 Observed HA/dec of plate center, fiducial point (deg) : 0.000 6.393 0.000 7.893 The rotation angle of the fid. point is -0.016880 plMakePlateFromTile : beginning loop over 1619 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8095.par makePlates : plateInfo struct for plate 2309 : (h4).mjd 53689 (h4).raCen 332.604 (h4).decCen -8.468 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.604 -8.468 332.604 -6.968 plMakePlateFromTile : mjd of obs : 53689.478360 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -8.425 0.000 -6.926 The rotation angle of the fid. point is -0.017230 plMakePlateFromTile : beginning loop over 1638 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8096.par makePlates : plateInfo struct for plate 2310 : (h4).mjd 53689 (h4).raCen 344.841 (h4).decCen 7.04533 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 344.841 7.045 344.841 8.545 plMakePlateFromTile : mjd of obs : 53689.512252 Observed HA/dec of plate center, fiducial point (deg) : 0.000 7.086 0.000 8.585 The rotation angle of the fid. point is -0.010574 plMakePlateFromTile : beginning loop over 2224 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8097.par makePlates : plateInfo struct for plate 2311 : (h4).mjd 53689 (h4).raCen 356.878 (h4).decCen -9.9017 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 356.878 -9.902 356.878 -8.402 plMakePlateFromTile : mjd of obs : 53689.545605 Observed HA/dec of plate center, fiducial point (deg) : 0.000 -9.854 0.000 -8.354 The rotation angle of the fid. point is -0.004702 plMakePlateFromTile : beginning loop over 1571 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8098.par makePlates : plateInfo struct for plate 2312 : (h4).mjd 53689 (h4).raCen 9.0344 (h4).decCen 7.48163 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 9.034 7.482 9.034 8.982 plMakePlateFromTile : mjd of obs : 53689.579276 Observed HA/dec of plate center, fiducial point (deg) : -0.002 7.524 -0.003 9.023 The rotation angle of the fid. point is 0.008024 plMakePlateFromTile : beginning loop over 1939 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8099.par makePlates : plateInfo struct for plate 2313 : (h4).mjd 53689 (h4).raCen 17 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 17.000 0.000 17.000 1.500 plMakePlateFromTile : mjd of obs : 53689.601343 Observed HA/dec of plate center, fiducial point (deg) : -0.002 0.044 -0.003 1.543 The rotation angle of the fid. point is 0.010893 plMakePlateFromTile : beginning loop over 1539 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8100.par makePlates : plateInfo struct for plate 2314 : (h4).mjd 53689 (h4).raCen 21.1309 (h4).decCen 7.20789 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.131 7.208 21.131 8.708 plMakePlateFromTile : mjd of obs : 53689.612790 Observed HA/dec of plate center, fiducial point (deg) : -0.002 7.249 -0.003 8.748 The rotation angle of the fid. point is 0.014793 plMakePlateFromTile : beginning loop over 1580 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8101.par makePlates : plateInfo struct for plate 2315 : (h4).mjd 53689 (h4).raCen 127.732 (h4).decCen 24.4045 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.732 24.404 127.732 25.904 plMakePlateFromTile : mjd of obs : 53689.908119 Observed HA/dec of plate center, fiducial point (deg) : -0.002 24.388 -0.003 25.888 The rotation angle of the fid. point is 0.044384 plMakePlateFromTile : beginning loop over 1645 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8102.par makePlates : plateInfo struct for plate 2316 : (h4).mjd 53689 (h4).raCen 129.62 (h4).decCen 53.9052 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.620 53.905 129.620 55.405 plMakePlateFromTile : mjd of obs : 53689.913418 Observed HA/dec of plate center, fiducial point (deg) : -0.002 53.877 -0.004 55.376 The rotation angle of the fid. point is -179.958256 plMakePlateFromTile : beginning loop over 1630 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapT-8103.par makePlates : plateInfo struct for plate 2317 : (h4).mjd 53689 (h4).raCen 132.575 (h4).decCen 6.13713 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.575 6.137 132.575 7.637 plMakePlateFromTile : mjd of obs : 53689.921507 Observed HA/dec of plate center, fiducial point (deg) : -0.002 6.126 -0.003 7.626 The rotation angle of the fid. point is 0.030167 plMakePlateFromTile : beginning loop over 1659 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Oct 17 17:11:33 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2303.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 62 28 2 68 18 3 65 14 4 83 18 5 68 18 6 44 16 7 48 15 8 51 24 9 55 20 10 121 28 11 71 21 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5421 40 1 183 582 plFiberPlate : adding spectro-photo std with objId = 5421 40 1 181 517 plFiberPlate : adding spectro-photo std with objId = 5421 40 2 178 415 plFiberPlate : adding spectro-photo std with objId = 5421 40 2 177 278 plFiberPlate : adding spectro-photo std with objId = 5421 40 5 176 527 plFiberPlate : adding spectro-photo std with objId = 5421 40 5 176 442 plFiberPlate : adding spectro-photo std with objId = 5421 40 3 176 623 plFiberPlate : adding spectro-photo std with objId = 5421 40 3 176 450 plFiberPlate : 19 possible sky positions to use as objects from a possible 105. plFiberPlate : 11 possible sky positions to use as objects from a possible 104. plFiberPlate : 9 possible sky positions to use as objects from a possible 103. plFiberPlate : 4 possible sky positions to use as objects from a possible 102. plFiberPlate : 2 possible sky positions to use as objects from a possible 101. plFiberPlate : 8 possible sky positions to use as objects from a possible 100. plFiberPlate : 10 possible sky positions to use as objects from a possible 99. plFiberPlate : 12 possible sky positions to use as objects from a possible 98. plFiberPlate : 8 possible sky positions to use as objects from a possible 97. plFiberPlate : 9 possible sky positions to use as objects from a possible 96. plFiberPlate : 7 possible sky positions to use as objects from a possible 95. plFiberPlate : 6 possible sky positions to use as objects from a possible 94. plFiberPlate : 2 possible sky positions to use as objects from a possible 93. plFiberPlate : 0 possible sky positions to use as objects from a possible 92. plFiberPlate: No sky found for bundle at 76.276 -76.040, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 92. plFiberPlate: No sky found for bundle at 76.276 -76.040, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 92. plFiberPlate : 4 possible sky positions to use as objects from a possible 91. plFiberPlate : 9 possible sky positions to use as objects from a possible 90. plFiberPlate : 8 possible sky positions to use as objects from a possible 89. plFiberPlate : 9 possible sky positions to use as objects from a possible 88. plFiberPlate : 8 possible sky positions to use as objects from a possible 87. plFiberPlate : 5 possible sky positions to use as objects from a possible 86. plFiberPlate : 3 possible sky positions to use as objects from a possible 85. plFiberPlate : 1 possible sky positions to use as objects from a possible 84. plFiberPlate : 1 possible sky positions to use as objects from a possible 83. plFiberPlate : 7 possible sky positions to use as objects from a possible 82. plFiberPlate : 4 possible sky positions to use as objects from a possible 81. plFiberPlate : 8 possible sky positions to use as objects from a possible 80. plFiberPlate : 8 possible sky positions to use as objects from a possible 79. plFiberPlate : 6 possible sky positions to use as objects from a possible 78. plFiberPlate : 2 possible sky positions to use as objects from a possible 77. plFiberPlate : 2 possible sky positions to use as objects from a possible 76. plFiberPlate : 1 possible sky positions to use as objects from a possible 75. plFiberPlate : 8 possible sky positions to use as objects from a possible 74. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 715 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2303.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2303.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2304.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 170 2 10 119 3 9 128 4 6 167 5 5 167 6 6 120 7 5 131 8 5 159 9 2 173 10 16 247 11 13 170 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 177 53 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 180 110 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 172 55 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 171 72 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 170 7 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 169 94 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 169 43 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 167 47 plFiberPlate : 179 possible sky positions to use as objects from a possible 853. plFiberPlate : 133 possible sky positions to use as objects from a possible 852. plFiberPlate : 82 possible sky positions to use as objects from a possible 851. plFiberPlate : 52 possible sky positions to use as objects from a possible 850. plFiberPlate : 61 possible sky positions to use as objects from a possible 849. plFiberPlate : 50 possible sky positions to use as objects from a possible 848. plFiberPlate : 69 possible sky positions to use as objects from a possible 847. plFiberPlate : 124 possible sky positions to use as objects from a possible 846. plFiberPlate : 81 possible sky positions to use as objects from a possible 845. plFiberPlate : 51 possible sky positions to use as objects from a possible 844. plFiberPlate : 27 possible sky positions to use as objects from a possible 843. plFiberPlate : 21 possible sky positions to use as objects from a possible 842. plFiberPlate : 20 possible sky positions to use as objects from a possible 841. plFiberPlate : 21 possible sky positions to use as objects from a possible 840. plFiberPlate : 26 possible sky positions to use as objects from a possible 839. plFiberPlate : 21 possible sky positions to use as objects from a possible 838. plFiberPlate : 121 possible sky positions to use as objects from a possible 837. plFiberPlate : 80 possible sky positions to use as objects from a possible 836. plFiberPlate : 69 possible sky positions to use as objects from a possible 835. plFiberPlate : 51 possible sky positions to use as objects from a possible 834. plFiberPlate : 35 possible sky positions to use as objects from a possible 833. plFiberPlate : 27 possible sky positions to use as objects from a possible 832. plFiberPlate : 26 possible sky positions to use as objects from a possible 831. plFiberPlate : 33 possible sky positions to use as objects from a possible 830. plFiberPlate : 21 possible sky positions to use as objects from a possible 829. plFiberPlate : 62 possible sky positions to use as objects from a possible 828. plFiberPlate : 40 possible sky positions to use as objects from a possible 827. plFiberPlate : 26 possible sky positions to use as objects from a possible 826. plFiberPlate : 8 possible sky positions to use as objects from a possible 825. plFiberPlate : 35 possible sky positions to use as objects from a possible 824. plFiberPlate : 24 possible sky positions to use as objects from a possible 823. plFiberPlate : 18 possible sky positions to use as objects from a possible 822. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 728 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2303.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2304.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2304.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2305.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 320 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 41 166 2 35 117 3 30 103 4 40 149 5 17 183 6 12 122 7 14 115 8 13 156 9 12 173 10 60 208 11 48 164 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 40 2 90 97 plFiberPlate : adding spectro-photo std with objId = 1737 40 1 90 92 plFiberPlate : adding spectro-photo std with objId = 1737 40 5 82 239 plFiberPlate : adding spectro-photo std with objId = 1737 40 5 82 101 plFiberPlate : adding spectro-photo std with objId = 1737 40 4 82 136 plFiberPlate : adding spectro-photo std with objId = 1737 40 3 81 45 plFiberPlate : adding spectro-photo std with objId = 1737 40 4 80 207 plFiberPlate : adding spectro-photo std with objId = 1737 40 3 80 252 plFiberPlate : 160 possible sky positions to use as objects from a possible 812. plFiberPlate : 91 possible sky positions to use as objects from a possible 811. plFiberPlate : 67 possible sky positions to use as objects from a possible 810. plFiberPlate : 47 possible sky positions to use as objects from a possible 809. plFiberPlate : 45 possible sky positions to use as objects from a possible 808. plFiberPlate : 46 possible sky positions to use as objects from a possible 807. plFiberPlate : 55 possible sky positions to use as objects from a possible 806. plFiberPlate : 102 possible sky positions to use as objects from a possible 805. plFiberPlate : 89 possible sky positions to use as objects from a possible 804. plFiberPlate : 60 possible sky positions to use as objects from a possible 803. plFiberPlate : 42 possible sky positions to use as objects from a possible 802. plFiberPlate : 30 possible sky positions to use as objects from a possible 801. plFiberPlate : 24 possible sky positions to use as objects from a possible 800. plFiberPlate : 17 possible sky positions to use as objects from a possible 799. plFiberPlate : 25 possible sky positions to use as objects from a possible 798. plFiberPlate : 43 possible sky positions to use as objects from a possible 797. plFiberPlate : 105 possible sky positions to use as objects from a possible 796. plFiberPlate : 94 possible sky positions to use as objects from a possible 795. plFiberPlate : 73 possible sky positions to use as objects from a possible 794. plFiberPlate : 39 possible sky positions to use as objects from a possible 793. plFiberPlate : 12 possible sky positions to use as objects from a possible 792. plFiberPlate : 18 possible sky positions to use as objects from a possible 791. plFiberPlate : 18 possible sky positions to use as objects from a possible 790. plFiberPlate : 23 possible sky positions to use as objects from a possible 789. plFiberPlate : 31 possible sky positions to use as objects from a possible 788. plFiberPlate : 78 possible sky positions to use as objects from a possible 787. plFiberPlate : 63 possible sky positions to use as objects from a possible 786. plFiberPlate : 56 possible sky positions to use as objects from a possible 785. plFiberPlate : 16 possible sky positions to use as objects from a possible 784. plFiberPlate : 20 possible sky positions to use as objects from a possible 783. plFiberPlate : 22 possible sky positions to use as objects from a possible 782. plFiberPlate : 30 possible sky positions to use as objects from a possible 781. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 695 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2304.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2305.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2305.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2306.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 190 2 6 126 3 10 115 4 15 155 5 4 179 6 5 118 7 8 113 8 2 163 9 6 169 10 13 246 11 10 182 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 98 3 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 96 56 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 96 9 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 94 17 plFiberPlate : adding spectro-photo std with objId = 5065 40 1 90 88 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 88 94 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 88 8 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 87 115 plFiberPlate : 189 possible sky positions to use as objects from a possible 861. plFiberPlate : 121 possible sky positions to use as objects from a possible 860. plFiberPlate : 72 possible sky positions to use as objects from a possible 859. plFiberPlate : 47 possible sky positions to use as objects from a possible 858. plFiberPlate : 39 possible sky positions to use as objects from a possible 857. plFiberPlate : 75 possible sky positions to use as objects from a possible 856. plFiberPlate : 52 possible sky positions to use as objects from a possible 855. plFiberPlate : 122 possible sky positions to use as objects from a possible 854. plFiberPlate : 91 possible sky positions to use as objects from a possible 853. plFiberPlate : 69 possible sky positions to use as objects from a possible 852. plFiberPlate : 34 possible sky positions to use as objects from a possible 851. plFiberPlate : 25 possible sky positions to use as objects from a possible 850. plFiberPlate : 14 possible sky positions to use as objects from a possible 849. plFiberPlate : 21 possible sky positions to use as objects from a possible 848. plFiberPlate : 26 possible sky positions to use as objects from a possible 847. plFiberPlate : 32 possible sky positions to use as objects from a possible 846. plFiberPlate : 114 possible sky positions to use as objects from a possible 845. plFiberPlate : 76 possible sky positions to use as objects from a possible 844. plFiberPlate : 50 possible sky positions to use as objects from a possible 843. plFiberPlate : 28 possible sky positions to use as objects from a possible 842. plFiberPlate : 32 possible sky positions to use as objects from a possible 841. plFiberPlate : 15 possible sky positions to use as objects from a possible 840. plFiberPlate : 35 possible sky positions to use as objects from a possible 839. plFiberPlate : 16 possible sky positions to use as objects from a possible 838. plFiberPlate : 25 possible sky positions to use as objects from a possible 837. plFiberPlate : 53 possible sky positions to use as objects from a possible 836. plFiberPlate : 51 possible sky positions to use as objects from a possible 835. plFiberPlate : 22 possible sky positions to use as objects from a possible 834. plFiberPlate : 20 possible sky positions to use as objects from a possible 833. plFiberPlate : 22 possible sky positions to use as objects from a possible 832. plFiberPlate : 15 possible sky positions to use as objects from a possible 831. plFiberPlate : 14 possible sky positions to use as objects from a possible 830. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 725 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2305.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2306.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2306.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2307.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 187 2 15 120 3 16 115 4 15 152 5 1 193 6 2 130 7 6 112 8 9 163 9 1 184 10 25 228 11 19 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5714 40 1 173 77 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 183 54 plFiberPlate : adding spectro-photo std with objId = 5065 40 1 181 38 plFiberPlate : adding spectro-photo std with objId = 5065 40 4 179 34 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 176 8 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 169 84 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 169 77 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 167 51 plFiberPlate : 186 possible sky positions to use as objects from a possible 849. plFiberPlate : 116 possible sky positions to use as objects from a possible 848. plFiberPlate : 80 possible sky positions to use as objects from a possible 847. plFiberPlate : 44 possible sky positions to use as objects from a possible 846. plFiberPlate : 41 possible sky positions to use as objects from a possible 845. plFiberPlate : 41 possible sky positions to use as objects from a possible 844. plFiberPlate : 70 possible sky positions to use as objects from a possible 843. plFiberPlate : 104 possible sky positions to use as objects from a possible 842. plFiberPlate : 76 possible sky positions to use as objects from a possible 841. plFiberPlate : 52 possible sky positions to use as objects from a possible 840. plFiberPlate : 33 possible sky positions to use as objects from a possible 839. plFiberPlate : 26 possible sky positions to use as objects from a possible 838. plFiberPlate : 29 possible sky positions to use as objects from a possible 837. plFiberPlate : 20 possible sky positions to use as objects from a possible 836. plFiberPlate : 22 possible sky positions to use as objects from a possible 835. plFiberPlate : 21 possible sky positions to use as objects from a possible 834. plFiberPlate : 110 possible sky positions to use as objects from a possible 833. plFiberPlate : 105 possible sky positions to use as objects from a possible 832. plFiberPlate : 63 possible sky positions to use as objects from a possible 831. plFiberPlate : 39 possible sky positions to use as objects from a possible 830. plFiberPlate : 47 possible sky positions to use as objects from a possible 829. plFiberPlate : 16 possible sky positions to use as objects from a possible 828. plFiberPlate : 19 possible sky positions to use as objects from a possible 827. plFiberPlate : 31 possible sky positions to use as objects from a possible 826. plFiberPlate : 22 possible sky positions to use as objects from a possible 825. plFiberPlate : 85 possible sky positions to use as objects from a possible 824. plFiberPlate : 59 possible sky positions to use as objects from a possible 823. plFiberPlate : 23 possible sky positions to use as objects from a possible 822. plFiberPlate : 23 possible sky positions to use as objects from a possible 821. plFiberPlate : 18 possible sky positions to use as objects from a possible 820. plFiberPlate : 17 possible sky positions to use as objects from a possible 819. plFiberPlate : 10 possible sky positions to use as objects from a possible 818. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2306.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2307.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2307.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2308.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 164 2 21 115 3 24 103 4 23 139 5 26 167 6 20 107 7 12 111 8 8 161 9 13 168 10 40 195 11 34 151 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5640 40 6 182 182 plFiberPlate : adding spectro-photo std with objId = 5655 40 6 175 52 plFiberPlate : adding spectro-photo std with objId = 5655 40 5 173 36 plFiberPlate : adding spectro-photo std with objId = 5655 40 5 172 88 plFiberPlate : adding spectro-photo std with objId = 5655 40 2 172 234 plFiberPlate : adding spectro-photo std with objId = 5655 40 3 169 70 plFiberPlate : adding spectro-photo std with objId = 5655 40 2 168 181 plFiberPlate : adding spectro-photo std with objId = 5655 40 4 166 137 plFiberPlate : 143 possible sky positions to use as objects from a possible 786. plFiberPlate : 93 possible sky positions to use as objects from a possible 785. plFiberPlate : 54 possible sky positions to use as objects from a possible 784. plFiberPlate : 32 possible sky positions to use as objects from a possible 783. plFiberPlate : 48 possible sky positions to use as objects from a possible 782. plFiberPlate : 48 possible sky positions to use as objects from a possible 781. plFiberPlate : 56 possible sky positions to use as objects from a possible 780. plFiberPlate : 102 possible sky positions to use as objects from a possible 779. plFiberPlate : 93 possible sky positions to use as objects from a possible 778. plFiberPlate : 68 possible sky positions to use as objects from a possible 777. plFiberPlate : 33 possible sky positions to use as objects from a possible 776. plFiberPlate : 25 possible sky positions to use as objects from a possible 775. plFiberPlate : 19 possible sky positions to use as objects from a possible 774. plFiberPlate : 40 possible sky positions to use as objects from a possible 773. plFiberPlate : 33 possible sky positions to use as objects from a possible 772. plFiberPlate : 16 possible sky positions to use as objects from a possible 771. plFiberPlate : 115 possible sky positions to use as objects from a possible 770. plFiberPlate : 78 possible sky positions to use as objects from a possible 769. plFiberPlate : 59 possible sky positions to use as objects from a possible 768. plFiberPlate : 40 possible sky positions to use as objects from a possible 767. plFiberPlate : 27 possible sky positions to use as objects from a possible 766. plFiberPlate : 20 possible sky positions to use as objects from a possible 765. plFiberPlate : 25 possible sky positions to use as objects from a possible 764. plFiberPlate : 20 possible sky positions to use as objects from a possible 763. plFiberPlate : 25 possible sky positions to use as objects from a possible 762. plFiberPlate : 57 possible sky positions to use as objects from a possible 761. plFiberPlate : 46 possible sky positions to use as objects from a possible 760. plFiberPlate : 37 possible sky positions to use as objects from a possible 759. plFiberPlate : 19 possible sky positions to use as objects from a possible 758. plFiberPlate : 14 possible sky positions to use as objects from a possible 757. plFiberPlate : 25 possible sky positions to use as objects from a possible 756. plFiberPlate : 22 possible sky positions to use as objects from a possible 755. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 746 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2307.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2308.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2308.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2309.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 662 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 172 2 21 126 3 21 110 4 22 148 5 23 174 6 13 127 7 6 124 8 6 172 9 17 181 10 42 232 11 32 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2576 40 4 81 136 plFiberPlate : adding spectro-photo std with objId = 2576 40 3 80 34 plFiberPlate : adding spectro-photo std with objId = 2576 40 5 78 142 plFiberPlate : adding spectro-photo std with objId = 2576 40 3 78 118 plFiberPlate : adding spectro-photo std with objId = 2576 40 1 72 99 plFiberPlate : adding spectro-photo std with objId = 2576 40 2 68 142 plFiberPlate : adding spectro-photo std with objId = 2576 40 6 67 90 plFiberPlate : adding spectro-photo std with objId = 2576 40 5 67 42 plFiberPlate : 156 possible sky positions to use as objects from a possible 845. plFiberPlate : 137 possible sky positions to use as objects from a possible 844. plFiberPlate : 93 possible sky positions to use as objects from a possible 843. plFiberPlate : 45 possible sky positions to use as objects from a possible 842. plFiberPlate : 42 possible sky positions to use as objects from a possible 841. plFiberPlate : 52 possible sky positions to use as objects from a possible 840. plFiberPlate : 46 possible sky positions to use as objects from a possible 839. plFiberPlate : 99 possible sky positions to use as objects from a possible 838. plFiberPlate : 73 possible sky positions to use as objects from a possible 837. plFiberPlate : 50 possible sky positions to use as objects from a possible 836. plFiberPlate : 27 possible sky positions to use as objects from a possible 835. plFiberPlate : 19 possible sky positions to use as objects from a possible 834. plFiberPlate : 28 possible sky positions to use as objects from a possible 833. plFiberPlate : 13 possible sky positions to use as objects from a possible 832. plFiberPlate : 23 possible sky positions to use as objects from a possible 831. plFiberPlate : 25 possible sky positions to use as objects from a possible 830. plFiberPlate : 104 possible sky positions to use as objects from a possible 829. plFiberPlate : 81 possible sky positions to use as objects from a possible 828. plFiberPlate : 50 possible sky positions to use as objects from a possible 827. plFiberPlate : 27 possible sky positions to use as objects from a possible 826. plFiberPlate : 29 possible sky positions to use as objects from a possible 825. plFiberPlate : 14 possible sky positions to use as objects from a possible 824. plFiberPlate : 30 possible sky positions to use as objects from a possible 823. plFiberPlate : 21 possible sky positions to use as objects from a possible 822. plFiberPlate : 7 possible sky positions to use as objects from a possible 821. plFiberPlate : 63 possible sky positions to use as objects from a possible 820. plFiberPlate : 66 possible sky positions to use as objects from a possible 819. plFiberPlate : 37 possible sky positions to use as objects from a possible 818. plFiberPlate : 21 possible sky positions to use as objects from a possible 817. plFiberPlate : 27 possible sky positions to use as objects from a possible 816. plFiberPlate : 24 possible sky positions to use as objects from a possible 815. plFiberPlate : 20 possible sky positions to use as objects from a possible 814. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 696 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2308.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2309.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2309.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2310.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 324 2 16 217 3 9 201 4 17 244 5 9 296 6 10 204 7 4 222 8 1 306 9 4 320 10 30 422 11 24 315 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5655 40 3 260 23 plFiberPlate : adding spectro-photo std with objId = 5655 40 1 259 198 plFiberPlate : adding spectro-photo std with objId = 5655 40 5 258 221 plFiberPlate : adding spectro-photo std with objId = 5655 40 6 254 48 plFiberPlate : adding spectro-photo std with objId = 5655 40 4 253 4 plFiberPlate : adding spectro-photo std with objId = 5655 40 3 251 209 plFiberPlate : adding spectro-photo std with objId = 5655 40 1 251 100 plFiberPlate : adding spectro-photo std with objId = 5655 40 6 249 111 plFiberPlate : 297 possible sky positions to use as objects from a possible 1486. plFiberPlate : 208 possible sky positions to use as objects from a possible 1485. plFiberPlate : 120 possible sky positions to use as objects from a possible 1484. plFiberPlate : 152 possible sky positions to use as objects from a possible 1483. plFiberPlate : 60 possible sky positions to use as objects from a possible 1482. plFiberPlate : 64 possible sky positions to use as objects from a possible 1481. plFiberPlate : 90 possible sky positions to use as objects from a possible 1480. plFiberPlate : 201 possible sky positions to use as objects from a possible 1479. plFiberPlate : 166 possible sky positions to use as objects from a possible 1478. plFiberPlate : 123 possible sky positions to use as objects from a possible 1477. plFiberPlate : 92 possible sky positions to use as objects from a possible 1476. plFiberPlate : 56 possible sky positions to use as objects from a possible 1475. plFiberPlate : 44 possible sky positions to use as objects from a possible 1474. plFiberPlate : 44 possible sky positions to use as objects from a possible 1473. plFiberPlate : 68 possible sky positions to use as objects from a possible 1472. plFiberPlate : 27 possible sky positions to use as objects from a possible 1471. plFiberPlate : 201 possible sky positions to use as objects from a possible 1470. plFiberPlate : 159 possible sky positions to use as objects from a possible 1469. plFiberPlate : 102 possible sky positions to use as objects from a possible 1468. plFiberPlate : 73 possible sky positions to use as objects from a possible 1467. plFiberPlate : 28 possible sky positions to use as objects from a possible 1466. plFiberPlate : 44 possible sky positions to use as objects from a possible 1465. plFiberPlate : 39 possible sky positions to use as objects from a possible 1464. plFiberPlate : 56 possible sky positions to use as objects from a possible 1463. plFiberPlate : 42 possible sky positions to use as objects from a possible 1462. plFiberPlate : 126 possible sky positions to use as objects from a possible 1461. plFiberPlate : 121 possible sky positions to use as objects from a possible 1460. plFiberPlate : 70 possible sky positions to use as objects from a possible 1459. plFiberPlate : 49 possible sky positions to use as objects from a possible 1458. plFiberPlate : 66 possible sky positions to use as objects from a possible 1457. plFiberPlate : 39 possible sky positions to use as objects from a possible 1456. plFiberPlate : 44 possible sky positions to use as objects from a possible 1455. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 714 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2309.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2310.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2310.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2311.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 196 2 4 130 3 6 113 4 7 166 5 6 194 6 6 122 7 3 123 8 2 169 9 6 188 10 12 239 11 7 175 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1891 40 5 72 22 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 65 12 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 64 88 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 61 6 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 60 23 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 59 29 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 58 53 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 57 33 plFiberPlate : 186 possible sky positions to use as objects from a possible 888. plFiberPlate : 109 possible sky positions to use as objects from a possible 887. plFiberPlate : 76 possible sky positions to use as objects from a possible 886. plFiberPlate : 41 possible sky positions to use as objects from a possible 885. plFiberPlate : 57 possible sky positions to use as objects from a possible 884. plFiberPlate : 49 possible sky positions to use as objects from a possible 883. plFiberPlate : 76 possible sky positions to use as objects from a possible 882. plFiberPlate : 125 possible sky positions to use as objects from a possible 881. plFiberPlate : 85 possible sky positions to use as objects from a possible 880. plFiberPlate : 50 possible sky positions to use as objects from a possible 879. plFiberPlate : 28 possible sky positions to use as objects from a possible 878. plFiberPlate : 27 possible sky positions to use as objects from a possible 877. plFiberPlate : 27 possible sky positions to use as objects from a possible 876. plFiberPlate : 26 possible sky positions to use as objects from a possible 875. plFiberPlate : 19 possible sky positions to use as objects from a possible 874. plFiberPlate : 25 possible sky positions to use as objects from a possible 873. plFiberPlate : 117 possible sky positions to use as objects from a possible 872. plFiberPlate : 77 possible sky positions to use as objects from a possible 871. plFiberPlate : 49 possible sky positions to use as objects from a possible 870. plFiberPlate : 36 possible sky positions to use as objects from a possible 869. plFiberPlate : 23 possible sky positions to use as objects from a possible 868. plFiberPlate : 7 possible sky positions to use as objects from a possible 867. plFiberPlate : 35 possible sky positions to use as objects from a possible 866. plFiberPlate : 24 possible sky positions to use as objects from a possible 865. plFiberPlate : 31 possible sky positions to use as objects from a possible 864. plFiberPlate : 73 possible sky positions to use as objects from a possible 863. plFiberPlate : 59 possible sky positions to use as objects from a possible 862. plFiberPlate : 37 possible sky positions to use as objects from a possible 861. plFiberPlate : 23 possible sky positions to use as objects from a possible 860. plFiberPlate : 25 possible sky positions to use as objects from a possible 859. plFiberPlate : 18 possible sky positions to use as objects from a possible 858. plFiberPlate : 20 possible sky positions to use as objects from a possible 857. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 686 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2310.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2311.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2311.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2312.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 271 2 9 190 3 7 182 4 10 225 5 3 262 6 4 164 7 5 149 8 11 234 9 9 250 10 13 349 11 14 255 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 51 46 plFiberPlate : adding spectro-photo std with objId = 5656 40 4 81 21 plFiberPlate : adding spectro-photo std with objId = 5656 40 4 75 78 plFiberPlate : adding spectro-photo std with objId = 5656 40 2 71 55 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 48 7 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 52 42 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 52 11 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 57 66 plFiberPlate : 256 possible sky positions to use as objects from a possible 1229. plFiberPlate : 184 possible sky positions to use as objects from a possible 1228. plFiberPlate : 134 possible sky positions to use as objects from a possible 1227. plFiberPlate : 103 possible sky positions to use as objects from a possible 1226. plFiberPlate : 51 possible sky positions to use as objects from a possible 1225. plFiberPlate : 79 possible sky positions to use as objects from a possible 1224. plFiberPlate : 70 possible sky positions to use as objects from a possible 1223. plFiberPlate : 151 possible sky positions to use as objects from a possible 1222. plFiberPlate : 127 possible sky positions to use as objects from a possible 1221. plFiberPlate : 92 possible sky positions to use as objects from a possible 1220. plFiberPlate : 58 possible sky positions to use as objects from a possible 1219. plFiberPlate : 46 possible sky positions to use as objects from a possible 1218. plFiberPlate : 35 possible sky positions to use as objects from a possible 1217. plFiberPlate : 39 possible sky positions to use as objects from a possible 1216. plFiberPlate : 24 possible sky positions to use as objects from a possible 1215. plFiberPlate : 39 possible sky positions to use as objects from a possible 1214. plFiberPlate : 186 possible sky positions to use as objects from a possible 1213. plFiberPlate : 154 possible sky positions to use as objects from a possible 1212. plFiberPlate : 117 possible sky positions to use as objects from a possible 1211. plFiberPlate : 82 possible sky positions to use as objects from a possible 1210. plFiberPlate : 29 possible sky positions to use as objects from a possible 1209. plFiberPlate : 30 possible sky positions to use as objects from a possible 1208. plFiberPlate : 37 possible sky positions to use as objects from a possible 1207. plFiberPlate : 30 possible sky positions to use as objects from a possible 1206. plFiberPlate : 45 possible sky positions to use as objects from a possible 1205. plFiberPlate : 98 possible sky positions to use as objects from a possible 1204. plFiberPlate : 67 possible sky positions to use as objects from a possible 1203. plFiberPlate : 51 possible sky positions to use as objects from a possible 1202. plFiberPlate : 25 possible sky positions to use as objects from a possible 1201. plFiberPlate : 31 possible sky positions to use as objects from a possible 1200. plFiberPlate : 29 possible sky positions to use as objects from a possible 1199. plFiberPlate : 16 possible sky positions to use as objects from a possible 1198. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 714 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2311.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2312.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2312.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2313.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 191 2 2 130 3 5 122 4 9 155 5 1 177 6 0 120 7 1 125 8 2 178 9 1 181 10 10 238 11 7 174 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 228 5 plFiberPlate : adding spectro-photo std with objId = 3325 41 1 225 65 plFiberPlate : adding spectro-photo std with objId = 3325 41 1 221 75 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 220 167 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 220 58 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 219 45 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 219 50 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 218 48 plFiberPlate : 176 possible sky positions to use as objects from a possible 876. plFiberPlate : 134 possible sky positions to use as objects from a possible 875. plFiberPlate : 94 possible sky positions to use as objects from a possible 874. plFiberPlate : 63 possible sky positions to use as objects from a possible 873. plFiberPlate : 84 possible sky positions to use as objects from a possible 872. plFiberPlate : 34 possible sky positions to use as objects from a possible 871. plFiberPlate : 66 possible sky positions to use as objects from a possible 870. plFiberPlate : 121 possible sky positions to use as objects from a possible 869. plFiberPlate : 97 possible sky positions to use as objects from a possible 868. plFiberPlate : 70 possible sky positions to use as objects from a possible 867. plFiberPlate : 48 possible sky positions to use as objects from a possible 866. plFiberPlate : 29 possible sky positions to use as objects from a possible 865. plFiberPlate : 20 possible sky positions to use as objects from a possible 864. plFiberPlate : 28 possible sky positions to use as objects from a possible 863. plFiberPlate : 16 possible sky positions to use as objects from a possible 862. plFiberPlate : 36 possible sky positions to use as objects from a possible 861. plFiberPlate : 127 possible sky positions to use as objects from a possible 860. plFiberPlate : 103 possible sky positions to use as objects from a possible 859. plFiberPlate : 75 possible sky positions to use as objects from a possible 858. plFiberPlate : 39 possible sky positions to use as objects from a possible 857. plFiberPlate : 19 possible sky positions to use as objects from a possible 856. plFiberPlate : 33 possible sky positions to use as objects from a possible 855. plFiberPlate : 26 possible sky positions to use as objects from a possible 854. plFiberPlate : 28 possible sky positions to use as objects from a possible 853. plFiberPlate : 24 possible sky positions to use as objects from a possible 852. plFiberPlate : 73 possible sky positions to use as objects from a possible 851. plFiberPlate : 51 possible sky positions to use as objects from a possible 850. plFiberPlate : 42 possible sky positions to use as objects from a possible 849. plFiberPlate : 18 possible sky positions to use as objects from a possible 848. plFiberPlate : 27 possible sky positions to use as objects from a possible 847. plFiberPlate : 33 possible sky positions to use as objects from a possible 846. plFiberPlate : 18 possible sky positions to use as objects from a possible 845. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 686 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2312.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2313.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2313.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2314.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 188 2 9 124 3 12 109 4 8 157 5 6 183 6 4 121 7 3 119 8 1 177 9 3 181 10 17 234 11 10 179 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 5641 40 2 135 67 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 132 20 plFiberPlate : adding spectro-photo std with objId = 5656 40 4 157 86 plFiberPlate : adding spectro-photo std with objId = 5656 40 5 155 14 plFiberPlate : adding spectro-photo std with objId = 5656 40 1 152 67 plFiberPlate : adding spectro-photo std with objId = 5656 40 2 149 102 plFiberPlate : adding spectro-photo std with objId = 5656 40 1 154 10 plFiberPlate : adding spectro-photo std with objId = 5641 40 4 140 7 plFiberPlate : 180 possible sky positions to use as objects from a possible 871. plFiberPlate : 132 possible sky positions to use as objects from a possible 870. plFiberPlate : 96 possible sky positions to use as objects from a possible 869. plFiberPlate : 40 possible sky positions to use as objects from a possible 868. plFiberPlate : 82 possible sky positions to use as objects from a possible 867. plFiberPlate : 29 possible sky positions to use as objects from a possible 866. plFiberPlate : 69 possible sky positions to use as objects from a possible 865. plFiberPlate : 107 possible sky positions to use as objects from a possible 864. plFiberPlate : 73 possible sky positions to use as objects from a possible 863. plFiberPlate : 54 possible sky positions to use as objects from a possible 862. plFiberPlate : 26 possible sky positions to use as objects from a possible 861. plFiberPlate : 32 possible sky positions to use as objects from a possible 860. plFiberPlate : 25 possible sky positions to use as objects from a possible 859. plFiberPlate : 18 possible sky positions to use as objects from a possible 858. plFiberPlate : 30 possible sky positions to use as objects from a possible 857. plFiberPlate : 16 possible sky positions to use as objects from a possible 856. plFiberPlate : 123 possible sky positions to use as objects from a possible 855. plFiberPlate : 85 possible sky positions to use as objects from a possible 854. plFiberPlate : 53 possible sky positions to use as objects from a possible 853. plFiberPlate : 37 possible sky positions to use as objects from a possible 852. plFiberPlate : 31 possible sky positions to use as objects from a possible 851. plFiberPlate : 26 possible sky positions to use as objects from a possible 850. plFiberPlate : 18 possible sky positions to use as objects from a possible 849. plFiberPlate : 28 possible sky positions to use as objects from a possible 848. plFiberPlate : 24 possible sky positions to use as objects from a possible 847. plFiberPlate : 60 possible sky positions to use as objects from a possible 846. plFiberPlate : 48 possible sky positions to use as objects from a possible 845. plFiberPlate : 30 possible sky positions to use as objects from a possible 844. plFiberPlate : 22 possible sky positions to use as objects from a possible 843. plFiberPlate : 14 possible sky positions to use as objects from a possible 842. plFiberPlate : 15 possible sky positions to use as objects from a possible 841. plFiberPlate : 22 possible sky positions to use as objects from a possible 840. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2313.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2314.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2314.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2315.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 155 2 8 114 3 13 130 4 11 160 5 9 175 6 8 131 7 12 139 8 17 158 9 16 180 10 18 225 11 15 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 114 142 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 113 71 plFiberPlate : adding spectro-photo std with objId = 4335 40 1 113 153 plFiberPlate : adding spectro-photo std with objId = 4335 40 6 110 97 plFiberPlate : adding spectro-photo std with objId = 4335 40 6 109 194 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 108 161 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 108 9 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 107 139 plFiberPlate : 168 possible sky positions to use as objects from a possible 844. plFiberPlate : 125 possible sky positions to use as objects from a possible 843. plFiberPlate : 87 possible sky positions to use as objects from a possible 842. plFiberPlate : 41 possible sky positions to use as objects from a possible 841. plFiberPlate : 34 possible sky positions to use as objects from a possible 840. plFiberPlate : 39 possible sky positions to use as objects from a possible 839. plFiberPlate : 77 possible sky positions to use as objects from a possible 838. plFiberPlate : 114 possible sky positions to use as objects from a possible 837. plFiberPlate : 100 possible sky positions to use as objects from a possible 836. plFiberPlate : 82 possible sky positions to use as objects from a possible 835. plFiberPlate : 50 possible sky positions to use as objects from a possible 834. plFiberPlate : 22 possible sky positions to use as objects from a possible 833. plFiberPlate : 20 possible sky positions to use as objects from a possible 832. plFiberPlate : 22 possible sky positions to use as objects from a possible 831. plFiberPlate : 31 possible sky positions to use as objects from a possible 830. plFiberPlate : 31 possible sky positions to use as objects from a possible 829. plFiberPlate : 108 possible sky positions to use as objects from a possible 828. plFiberPlate : 89 possible sky positions to use as objects from a possible 827. plFiberPlate : 64 possible sky positions to use as objects from a possible 826. plFiberPlate : 36 possible sky positions to use as objects from a possible 825. plFiberPlate : 26 possible sky positions to use as objects from a possible 824. plFiberPlate : 34 possible sky positions to use as objects from a possible 823. plFiberPlate : 17 possible sky positions to use as objects from a possible 822. plFiberPlate : 30 possible sky positions to use as objects from a possible 821. plFiberPlate : 13 possible sky positions to use as objects from a possible 820. plFiberPlate : 76 possible sky positions to use as objects from a possible 819. plFiberPlate : 65 possible sky positions to use as objects from a possible 818. plFiberPlate : 31 possible sky positions to use as objects from a possible 817. plFiberPlate : 22 possible sky positions to use as objects from a possible 816. plFiberPlate : 33 possible sky positions to use as objects from a possible 815. plFiberPlate : 17 possible sky positions to use as objects from a possible 814. plFiberPlate : 30 possible sky positions to use as objects from a possible 813. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 754 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2314.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2315.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2315.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2316.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 658 to list of science objects plFiberPlate : adding sky number 751 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 153 2 11 130 3 19 139 4 27 155 5 24 138 6 21 123 7 17 130 8 22 158 9 25 166 10 29 244 11 20 165 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 180 130 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 179 41 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 178 85 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 172 152 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 170 172 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 169 30 plFiberPlate : adding spectro-photo std with objId = 1350 40 3 168 83 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 167 127 plFiberPlate : 177 possible sky positions to use as objects from a possible 823. plFiberPlate : 128 possible sky positions to use as objects from a possible 822. plFiberPlate : 91 possible sky positions to use as objects from a possible 821. plFiberPlate : 67 possible sky positions to use as objects from a possible 820. plFiberPlate : 33 possible sky positions to use as objects from a possible 819. plFiberPlate : 30 possible sky positions to use as objects from a possible 818. plFiberPlate : 75 possible sky positions to use as objects from a possible 817. plFiberPlate : 139 possible sky positions to use as objects from a possible 816. plFiberPlate : 107 possible sky positions to use as objects from a possible 815. plFiberPlate : 96 possible sky positions to use as objects from a possible 814. plFiberPlate : 56 possible sky positions to use as objects from a possible 813. plFiberPlate : 36 possible sky positions to use as objects from a possible 812. plFiberPlate : 33 possible sky positions to use as objects from a possible 811. plFiberPlate : 22 possible sky positions to use as objects from a possible 810. plFiberPlate : 18 possible sky positions to use as objects from a possible 809. plFiberPlate : 38 possible sky positions to use as objects from a possible 808. plFiberPlate : 90 possible sky positions to use as objects from a possible 807. plFiberPlate : 74 possible sky positions to use as objects from a possible 806. plFiberPlate : 42 possible sky positions to use as objects from a possible 805. plFiberPlate : 32 possible sky positions to use as objects from a possible 804. plFiberPlate : 20 possible sky positions to use as objects from a possible 803. plFiberPlate : 13 possible sky positions to use as objects from a possible 802. plFiberPlate : 28 possible sky positions to use as objects from a possible 801. plFiberPlate : 13 possible sky positions to use as objects from a possible 800. plFiberPlate : 28 possible sky positions to use as objects from a possible 799. plFiberPlate : 57 possible sky positions to use as objects from a possible 798. plFiberPlate : 45 possible sky positions to use as objects from a possible 797. plFiberPlate : 30 possible sky positions to use as objects from a possible 796. plFiberPlate : 23 possible sky positions to use as objects from a possible 795. plFiberPlate : 25 possible sky positions to use as objects from a possible 794. plFiberPlate : 18 possible sky positions to use as objects from a possible 793. plFiberPlate : 15 possible sky positions to use as objects from a possible 792. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 717 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2315.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2316.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2316.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.1/plPlugMapP-2317.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 162 2 12 127 3 16 116 4 21 148 5 13 162 6 13 104 7 12 116 8 11 164 9 12 169 10 34 219 11 26 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 86 119 plFiberPlate : adding spectro-photo std with objId = 3031 40 1 80 144 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 79 29 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 79 156 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 78 32 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 77 105 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 77 149 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 76 75 plFiberPlate : 157 possible sky positions to use as objects from a possible 799. plFiberPlate : 138 possible sky positions to use as objects from a possible 798. plFiberPlate : 89 possible sky positions to use as objects from a possible 797. plFiberPlate : 56 possible sky positions to use as objects from a possible 796. plFiberPlate : 72 possible sky positions to use as objects from a possible 795. plFiberPlate : 43 possible sky positions to use as objects from a possible 794. plFiberPlate : 49 possible sky positions to use as objects from a possible 793. plFiberPlate : 106 possible sky positions to use as objects from a possible 792. plFiberPlate : 78 possible sky positions to use as objects from a possible 791. plFiberPlate : 55 possible sky positions to use as objects from a possible 790. plFiberPlate : 28 possible sky positions to use as objects from a possible 789. plFiberPlate : 17 possible sky positions to use as objects from a possible 788. plFiberPlate : 15 possible sky positions to use as objects from a possible 787. plFiberPlate : 28 possible sky positions to use as objects from a possible 786. plFiberPlate : 19 possible sky positions to use as objects from a possible 785. plFiberPlate : 16 possible sky positions to use as objects from a possible 784. plFiberPlate : 93 possible sky positions to use as objects from a possible 783. plFiberPlate : 57 possible sky positions to use as objects from a possible 782. plFiberPlate : 44 possible sky positions to use as objects from a possible 781. plFiberPlate : 25 possible sky positions to use as objects from a possible 780. plFiberPlate : 27 possible sky positions to use as objects from a possible 779. plFiberPlate : 17 possible sky positions to use as objects from a possible 778. plFiberPlate : 29 possible sky positions to use as objects from a possible 777. plFiberPlate : 23 possible sky positions to use as objects from a possible 776. plFiberPlate : 16 possible sky positions to use as objects from a possible 775. plFiberPlate : 64 possible sky positions to use as objects from a possible 774. plFiberPlate : 57 possible sky positions to use as objects from a possible 773. plFiberPlate : 25 possible sky positions to use as objects from a possible 772. plFiberPlate : 15 possible sky positions to use as objects from a possible 771. plFiberPlate : 22 possible sky positions to use as objects from a possible 770. plFiberPlate : 22 possible sky positions to use as objects from a possible 769. plFiberPlate : 28 possible sky positions to use as objects from a possible 768. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 760 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2316.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2317.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.1/plOverlay-2317.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Oct 17 17:12:11 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 53 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2303.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2303.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2303.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 66 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2304.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2304.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2304.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 33 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2305.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2305.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2305.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 63 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2306.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2306.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2306.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2307.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2307.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2307.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 84 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2308.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2308.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2308.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 34 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2309.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2309.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2309.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 52 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2310.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2310.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2310.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 24 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2311.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2311.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2311.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 52 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2312.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2312.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2312.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 24 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2313.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2313.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2313.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2314.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2314.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2314.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 92 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2315.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2315.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2315.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 55 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2316.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2316.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2316.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.3029,-10.7512) and (2.28,-12.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 98 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2317.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2317.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.1/plFanuc-2317.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Oct 17 17:12:56 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8f0b974 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2303 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 715 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2304 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 728 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2305 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 695 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2306 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 725 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2307 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2308 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 746 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2309 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 696 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2310 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 714 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2311 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 686 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2312 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 714 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2313 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 686 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2314 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2315 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 754 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2316 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 717 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2317 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 760 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Oct 17 17:13:14 CDT 2005 Begin running "plateEnder dr2005.10.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_83/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_83/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.10.1 -morePipes 1" failed. PS: Read file for stderr output of this job.