Sender: LSF System Subject: Job 87654: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Feb 3 17:30:15 2006 Results reported at Fri Feb 3 17:34:24 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.02.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 194.13 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Feb 3 17:30:26 CST 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Feb 3 17:30:44 CST 2006 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_194/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Fri Feb 3 17:30:44 CST 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_194/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Fri Feb 3 17:30:45 CST 2006 Begin running plate --------------------------------------------------------------- Fri Feb 3 17:30:45 CST 2006 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_194/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_194/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xa2938bc makePlates : beginning loop over plObs chain; makePlates : making 23 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1703.par makePlates : plateInfo struct for plate 2418 : (h4).mjd 53743 (h4).raCen 120.4554 (h4).decCen 11.27402 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 120.455 11.274 120.455 12.774 plMakePlateFromTile : mjd of obs : 53743.615816 Observed HA/dec of plate center, fiducial point (deg) : -45.002 11.268 -45.003 12.768 The rotation angle of the fid. point is 55.133170 plMakePlateFromTile : beginning loop over 1417 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1716.par makePlates : plateInfo struct for plate 2419 : (h4).mjd 53743 (h4).raCen 120.9254 (h4).decCen 9.573663 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 120.925 9.574 120.925 11.074 plMakePlateFromTile : mjd of obs : 53743.617115 Observed HA/dec of plate center, fiducial point (deg) : -45.002 9.569 -45.003 11.068 The rotation angle of the fid. point is 53.842116 plMakePlateFromTile : beginning loop over 1315 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1706.par makePlates : plateInfo struct for plate 2420 : (h4).mjd 53743 (h4).raCen 123.1137 (h4).decCen 12.09609 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.114 12.096 123.114 13.596 plMakePlateFromTile : mjd of obs : 53743.623181 Observed HA/dec of plate center, fiducial point (deg) : -45.002 12.089 -45.003 13.588 The rotation angle of the fid. point is 55.779044 plMakePlateFromTile : beginning loop over 1434 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1711.par makePlates : plateInfo struct for plate 2421 : (h4).mjd 53743 (h4).raCen 123.2103 (h4).decCen 10.08676 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.210 10.087 123.210 11.587 plMakePlateFromTile : mjd of obs : 53743.623445 Observed HA/dec of plate center, fiducial point (deg) : -45.002 10.080 -45.003 11.580 The rotation angle of the fid. point is 54.223149 plMakePlateFromTile : beginning loop over 1303 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1709.par makePlates : plateInfo struct for plate 2422 : (h4).mjd 53743 (h4).raCen 125.4685 (h4).decCen 13.02357 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.469 13.024 125.469 14.524 plMakePlateFromTile : mjd of obs : 53743.629705 Observed HA/dec of plate center, fiducial point (deg) : -45.002 13.015 -45.003 14.514 The rotation angle of the fid. point is 56.526988 plMakePlateFromTile : beginning loop over 1423 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1715.par makePlates : plateInfo struct for plate 2423 : (h4).mjd 53743 (h4).raCen 125.7256 (h4).decCen 10.81942 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.726 10.819 125.726 12.319 plMakePlateFromTile : mjd of obs : 53743.630414 Observed HA/dec of plate center, fiducial point (deg) : -45.002 10.811 -45.003 12.311 The rotation angle of the fid. point is 54.777964 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1717.par makePlates : plateInfo struct for plate 2424 : (h4).mjd 53743 (h4).raCen 127.5039 (h4).decCen 11.59683 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.504 11.597 127.504 13.097 plMakePlateFromTile : mjd of obs : 53743.635341 Observed HA/dec of plate center, fiducial point (deg) : -45.002 11.587 -45.003 13.087 The rotation angle of the fid. point is 55.380629 plMakePlateFromTile : beginning loop over 1372 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1710.par makePlates : plateInfo struct for plate 2425 : (h4).mjd 53743 (h4).raCen 127.6813 (h4).decCen 13.67115 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.681 13.671 127.681 15.171 plMakePlateFromTile : mjd of obs : 53743.635836 Observed HA/dec of plate center, fiducial point (deg) : -45.002 13.661 -45.003 15.160 The rotation angle of the fid. point is 57.060736 plMakePlateFromTile : beginning loop over 1404 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (290.72, 22.29, 8.1) and (288.79, 24.07, 7.4) checkLTHo : distance = 2.618, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(290.72, 22.29, 8.1) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1704.par makePlates : plateInfo struct for plate 2426 : (h4).mjd 53743 (h4).raCen 129.3798 (h4).decCen 12.07531 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.380 12.075 129.380 13.575 plMakePlateFromTile : mjd of obs : 53743.698734 Observed HA/dec of plate center, fiducial point (deg) : -24.002 12.062 -24.003 13.562 The rotation angle of the fid. point is 42.858901 plMakePlateFromTile : beginning loop over 1356 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1708.par makePlates : plateInfo struct for plate 2427 : (h4).mjd 53743 (h4).raCen 129.4734 (h4).decCen 14.62358 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.473 14.624 129.473 16.124 plMakePlateFromTile : mjd of obs : 53743.698997 Observed HA/dec of plate center, fiducial point (deg) : -24.002 14.609 -24.003 16.109 The rotation angle of the fid. point is 46.037355 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-88.49, -185.94, 8.1) and (-90.39, -184.15, 7.4) checkLTHo : distance = 2.610, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-88.49, -185.94, 8.1) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1707.par makePlates : plateInfo struct for plate 2428 : (h4).mjd 53743 (h4).raCen 131.1248 (h4).decCen 12.59142 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.125 12.591 131.125 14.091 plMakePlateFromTile : mjd of obs : 53743.698026 Observed HA/dec of plate center, fiducial point (deg) : -26.002 12.577 -26.003 14.077 The rotation angle of the fid. point is 45.399386 plMakePlateFromTile : beginning loop over 1371 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1705.par makePlates : plateInfo struct for plate 2429 : (h4).mjd 53743 (h4).raCen 131.1709 (h4).decCen 15.21967 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.171 15.220 131.171 16.720 plMakePlateFromTile : mjd of obs : 53743.698157 Observed HA/dec of plate center, fiducial point (deg) : -26.002 15.205 -26.003 16.704 The rotation angle of the fid. point is 48.689371 plMakePlateFromTile : beginning loop over 1381 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (276.40, -83.33, 7.6) and (277.25, -83.87, 8.5) checkLTHo : distance = 1.008, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(277.25, -83.87, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1718.par makePlates : plateInfo struct for plate 2430 : (h4).mjd 53743 (h4).raCen 132.8268 (h4).decCen 13.05883 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.827 13.059 132.827 14.559 plMakePlateFromTile : mjd of obs : 53743.699970 Observed HA/dec of plate center, fiducial point (deg) : -27.002 13.044 -27.003 14.543 The rotation angle of the fid. point is 46.836693 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1713.par makePlates : plateInfo struct for plate 2431 : (h4).mjd 53743 (h4).raCen 133.3459 (h4).decCen 15.64589 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.346 15.646 133.346 17.146 plMakePlateFromTile : mjd of obs : 53743.698640 Observed HA/dec of plate center, fiducial point (deg) : -28.002 15.630 -28.003 17.129 The rotation angle of the fid. point is 50.876858 plMakePlateFromTile : beginning loop over 1386 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-181.70, -176.63, 7.6) and (-180.85, -177.18, 8.5) checkLTHo : distance = 1.003, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-180.85, -177.18, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1720.par makePlates : plateInfo struct for plate 2432 : (h4).mjd 53743 (h4).raCen 134.414 (h4).decCen 16.31364 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.414 16.314 134.414 17.814 plMakePlateFromTile : mjd of obs : 53743.698828 Observed HA/dec of plate center, fiducial point (deg) : -29.002 16.297 -29.003 17.796 The rotation angle of the fid. point is 52.482078 plMakePlateFromTile : beginning loop over 1356 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1719.par makePlates : plateInfo struct for plate 2433 : (h4).mjd 53743 (h4).raCen 134.4291 (h4).decCen 13.56374 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.429 13.564 134.429 15.064 plMakePlateFromTile : mjd of obs : 53743.698866 Observed HA/dec of plate center, fiducial point (deg) : -29.002 13.548 -29.003 15.047 The rotation angle of the fid. point is 49.049908 plMakePlateFromTile : beginning loop over 1387 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1722.par makePlates : plateInfo struct for plate 2434 : (h4).mjd 53743 (h4).raCen 136.0639 (h4).decCen 13.89253 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.064 13.893 136.064 15.393 plMakePlateFromTile : mjd of obs : 53743.697852 Observed HA/dec of plate center, fiducial point (deg) : -31.002 13.876 -31.003 15.375 The rotation angle of the fid. point is 50.860431 plMakePlateFromTile : beginning loop over 1384 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1725.par makePlates : plateInfo struct for plate 2435 : (h4).mjd 53743 (h4).raCen 136.4235 (h4).decCen 16.75671 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.423 16.757 136.423 18.257 plMakePlateFromTile : mjd of obs : 53743.698852 Observed HA/dec of plate center, fiducial point (deg) : -31.002 16.739 -31.003 18.238 The rotation angle of the fid. point is 54.350842 plMakePlateFromTile : beginning loop over 1377 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1723.par makePlates : plateInfo struct for plate 2436 : (h4).mjd 53743 (h4).raCen 137.7268 (h4).decCen 14.34507 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.727 14.345 137.727 15.845 plMakePlateFromTile : mjd of obs : 53743.699688 Observed HA/dec of plate center, fiducial point (deg) : -32.002 14.328 -32.003 15.827 The rotation angle of the fid. point is 52.026076 plMakePlateFromTile : beginning loop over 1391 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1724.par makePlates : plateInfo struct for plate 2437 : (h4).mjd 53743 (h4).raCen 137.8911 (h4).decCen 17.18138 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.891 17.181 137.891 18.681 plMakePlateFromTile : mjd of obs : 53743.700147 Observed HA/dec of plate center, fiducial point (deg) : -32.002 17.163 -32.003 18.662 The rotation angle of the fid. point is 55.467620 plMakePlateFromTile : beginning loop over 1358 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1721.par makePlates : plateInfo struct for plate 2438 : (h4).mjd 53743 (h4).raCen 139.317 (h4).decCen 14.75075 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.317 14.751 139.317 16.251 plMakePlateFromTile : mjd of obs : 53743.698550 Observed HA/dec of plate center, fiducial point (deg) : -34.002 14.733 -34.003 16.232 The rotation angle of the fid. point is 53.649606 plMakePlateFromTile : beginning loop over 1368 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1712.par makePlates : plateInfo struct for plate 2439 : (h4).mjd 53743 (h4).raCen 139.6731 (h4).decCen 17.74665 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.673 17.747 139.673 19.247 plMakePlateFromTile : mjd of obs : 53743.741107 Observed HA/dec of plate center, fiducial point (deg) : -19.002 17.726 -19.003 19.226 The rotation angle of the fid. point is 45.034834 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk135/complete//plPlugMapT-1714.par makePlates : plateInfo struct for plate 2440 : (h4).mjd 53743 (h4).raCen 140.8024 (h4).decCen 15.15933 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.802 15.159 140.802 16.659 plMakePlateFromTile : mjd of obs : 53743.741460 Observed HA/dec of plate center, fiducial point (deg) : -20.002 15.139 -20.003 16.639 The rotation angle of the fid. point is 42.304610 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Feb 3 17:31:25 CST 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_194/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_194/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 23 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2418.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 99 2 30 68 3 32 62 4 42 93 5 44 112 6 37 101 7 39 85 8 38 90 9 33 103 10 64 109 11 41 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5182 40 4 48 165 plFiberPlate : adding spectro-photo std with objId = 5794 40 4 32 114 plFiberPlate : adding spectro-photo std with objId = 5794 40 3 27 87 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 50 109 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 38 294 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 51 135 plFiberPlate : adding spectro-photo std with objId = 5794 40 3 34 163 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 35 266 plFiberPlate : 94 possible sky positions to use as objects from a possible 508. plFiberPlate : 58 possible sky positions to use as objects from a possible 507. plFiberPlate : 26 possible sky positions to use as objects from a possible 506. plFiberPlate : 19 possible sky positions to use as objects from a possible 505. plFiberPlate : 27 possible sky positions to use as objects from a possible 504. plFiberPlate : 30 possible sky positions to use as objects from a possible 503. plFiberPlate : 28 possible sky positions to use as objects from a possible 502. plFiberPlate : 78 possible sky positions to use as objects from a possible 501. plFiberPlate : 52 possible sky positions to use as objects from a possible 500. plFiberPlate : 33 possible sky positions to use as objects from a possible 499. plFiberPlate : 26 possible sky positions to use as objects from a possible 498. plFiberPlate : 20 possible sky positions to use as objects from a possible 497. plFiberPlate : 16 possible sky positions to use as objects from a possible 496. plFiberPlate : 15 possible sky positions to use as objects from a possible 495. plFiberPlate : 17 possible sky positions to use as objects from a possible 494. plFiberPlate : 23 possible sky positions to use as objects from a possible 493. plFiberPlate : 47 possible sky positions to use as objects from a possible 492. plFiberPlate : 32 possible sky positions to use as objects from a possible 491. plFiberPlate : 20 possible sky positions to use as objects from a possible 490. plFiberPlate : 11 possible sky positions to use as objects from a possible 489. plFiberPlate : 6 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 17 possible sky positions to use as objects from a possible 484. plFiberPlate : 94 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 6 possible sky positions to use as objects from a possible 481. plFiberPlate : 13 possible sky positions to use as objects from a possible 480. plFiberPlate : 10 possible sky positions to use as objects from a possible 479. plFiberPlate : 4 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 684 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2418.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2418.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2419.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 84 2 19 47 3 20 46 4 20 51 5 49 91 6 44 83 7 40 78 8 35 92 9 37 84 10 51 112 11 30 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 25 130 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 26 231 plFiberPlate : adding spectro-photo std with objId = 5182 40 2 48 306 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 50 109 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 32 397 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 35 266 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 34 149 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 37 285 plFiberPlate : 71 possible sky positions to use as objects from a possible 411. plFiberPlate : 57 possible sky positions to use as objects from a possible 410. plFiberPlate : 33 possible sky positions to use as objects from a possible 409. plFiberPlate : 13 possible sky positions to use as objects from a possible 408. plFiberPlate : 18 possible sky positions to use as objects from a possible 407. plFiberPlate : 24 possible sky positions to use as objects from a possible 406. plFiberPlate : 37 possible sky positions to use as objects from a possible 405. plFiberPlate : 44 possible sky positions to use as objects from a possible 404. plFiberPlate : 33 possible sky positions to use as objects from a possible 403. plFiberPlate : 19 possible sky positions to use as objects from a possible 402. plFiberPlate : 13 possible sky positions to use as objects from a possible 401. plFiberPlate : 10 possible sky positions to use as objects from a possible 400. plFiberPlate : 8 possible sky positions to use as objects from a possible 399. plFiberPlate : 10 possible sky positions to use as objects from a possible 398. plFiberPlate : 8 possible sky positions to use as objects from a possible 397. plFiberPlate : 20 possible sky positions to use as objects from a possible 396. plFiberPlate : 36 possible sky positions to use as objects from a possible 395. plFiberPlate : 34 possible sky positions to use as objects from a possible 394. plFiberPlate : 16 possible sky positions to use as objects from a possible 393. plFiberPlate : 14 possible sky positions to use as objects from a possible 392. plFiberPlate : 13 possible sky positions to use as objects from a possible 391. plFiberPlate : 11 possible sky positions to use as objects from a possible 390. plFiberPlate : 8 possible sky positions to use as objects from a possible 389. plFiberPlate : 5 possible sky positions to use as objects from a possible 388. plFiberPlate : 12 possible sky positions to use as objects from a possible 387. plFiberPlate : 66 possible sky positions to use as objects from a possible 386. plFiberPlate : 41 possible sky positions to use as objects from a possible 385. plFiberPlate : 15 possible sky positions to use as objects from a possible 384. plFiberPlate : 20 possible sky positions to use as objects from a possible 383. plFiberPlate : 13 possible sky positions to use as objects from a possible 382. plFiberPlate : 11 possible sky positions to use as objects from a possible 381. plFiberPlate : 24 possible sky positions to use as objects from a possible 380. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 685 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2418.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2419.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2419.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2420.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 110 2 18 93 3 17 78 4 27 105 5 35 128 6 36 100 7 39 82 8 46 89 9 43 102 10 33 147 11 20 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5794 40 3 51 77 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 61 314 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 63 223 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 69 274 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 73 123 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 58 37 plFiberPlate : adding spectro-photo std with objId = 5794 40 3 58 155 plFiberPlate : adding spectro-photo std with objId = 5794 40 2 45 38 plFiberPlate : 104 possible sky positions to use as objects from a possible 580. plFiberPlate : 92 possible sky positions to use as objects from a possible 579. plFiberPlate : 60 possible sky positions to use as objects from a possible 578. plFiberPlate : 28 possible sky positions to use as objects from a possible 577. plFiberPlate : 31 possible sky positions to use as objects from a possible 576. plFiberPlate : 50 possible sky positions to use as objects from a possible 575. plFiberPlate : 44 possible sky positions to use as objects from a possible 574. plFiberPlate : 73 possible sky positions to use as objects from a possible 573. plFiberPlate : 44 possible sky positions to use as objects from a possible 572. plFiberPlate : 29 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 7 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 17 possible sky positions to use as objects from a possible 565. plFiberPlate : 79 possible sky positions to use as objects from a possible 564. plFiberPlate : 53 possible sky positions to use as objects from a possible 563. plFiberPlate : 38 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 21 possible sky positions to use as objects from a possible 560. plFiberPlate : 4 possible sky positions to use as objects from a possible 559. plFiberPlate : 6 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 67 possible sky positions to use as objects from a possible 555. plFiberPlate : 17 possible sky positions to use as objects from a possible 554. plFiberPlate : 9 possible sky positions to use as objects from a possible 553. plFiberPlate : 12 possible sky positions to use as objects from a possible 552. plFiberPlate : 10 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2419.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2420.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2420.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2421.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 73 2 5 27 3 17 53 4 30 82 5 41 108 6 29 91 7 26 80 8 32 91 9 22 91 10 28 106 11 13 70 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 63 223 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 43 227 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 58 37 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 43 34 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 54 140 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 37 285 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 48 209 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 49 206 plFiberPlate : 98 possible sky positions to use as objects from a possible 448. plFiberPlate : 69 possible sky positions to use as objects from a possible 447. plFiberPlate : 46 possible sky positions to use as objects from a possible 446. plFiberPlate : 18 possible sky positions to use as objects from a possible 445. plFiberPlate : 16 possible sky positions to use as objects from a possible 444. plFiberPlate : 14 possible sky positions to use as objects from a possible 443. plFiberPlate : 37 possible sky positions to use as objects from a possible 442. plFiberPlate : 45 possible sky positions to use as objects from a possible 441. plFiberPlate : 38 possible sky positions to use as objects from a possible 440. plFiberPlate : 27 possible sky positions to use as objects from a possible 439. plFiberPlate : 11 possible sky positions to use as objects from a possible 438. plFiberPlate : 6 possible sky positions to use as objects from a possible 437. plFiberPlate : 7 possible sky positions to use as objects from a possible 436. plFiberPlate : 5 possible sky positions to use as objects from a possible 435. plFiberPlate : 7 possible sky positions to use as objects from a possible 434. plFiberPlate : 13 possible sky positions to use as objects from a possible 433. plFiberPlate : 62 possible sky positions to use as objects from a possible 432. plFiberPlate : 50 possible sky positions to use as objects from a possible 431. plFiberPlate : 38 possible sky positions to use as objects from a possible 430. plFiberPlate : 14 possible sky positions to use as objects from a possible 429. plFiberPlate : 10 possible sky positions to use as objects from a possible 428. plFiberPlate : 5 possible sky positions to use as objects from a possible 427. plFiberPlate : 6 possible sky positions to use as objects from a possible 426. plFiberPlate : 7 possible sky positions to use as objects from a possible 425. plFiberPlate : 18 possible sky positions to use as objects from a possible 424. plFiberPlate : 41 possible sky positions to use as objects from a possible 423. plFiberPlate : 52 possible sky positions to use as objects from a possible 422. plFiberPlate : 29 possible sky positions to use as objects from a possible 421. plFiberPlate : 13 possible sky positions to use as objects from a possible 420. plFiberPlate : 20 possible sky positions to use as objects from a possible 419. plFiberPlate : 10 possible sky positions to use as objects from a possible 418. plFiberPlate : 13 possible sky positions to use as objects from a possible 417. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 682 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2420.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2421.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2421.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2422.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 120 2 26 97 3 26 75 4 33 90 5 44 118 6 33 105 7 23 84 8 34 98 9 34 89 10 48 139 11 28 125 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5794 40 5 64 278 plFiberPlate : adding spectro-photo std with objId = 5794 40 4 66 66 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 80 132 plFiberPlate : adding spectro-photo std with objId = 5794 40 2 57 209 plFiberPlate : adding spectro-photo std with objId = 5794 40 3 58 155 plFiberPlate : adding spectro-photo std with objId = 5794 40 4 60 31 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 88 243 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 87 75 plFiberPlate : 103 possible sky positions to use as objects from a possible 571. plFiberPlate : 68 possible sky positions to use as objects from a possible 570. plFiberPlate : 52 possible sky positions to use as objects from a possible 569. plFiberPlate : 37 possible sky positions to use as objects from a possible 568. plFiberPlate : 15 possible sky positions to use as objects from a possible 567. plFiberPlate : 35 possible sky positions to use as objects from a possible 566. plFiberPlate : 62 possible sky positions to use as objects from a possible 565. plFiberPlate : 64 possible sky positions to use as objects from a possible 564. plFiberPlate : 37 possible sky positions to use as objects from a possible 563. plFiberPlate : 30 possible sky positions to use as objects from a possible 562. plFiberPlate : 24 possible sky positions to use as objects from a possible 561. plFiberPlate : 12 possible sky positions to use as objects from a possible 560. plFiberPlate : 25 possible sky positions to use as objects from a possible 559. plFiberPlate : 7 possible sky positions to use as objects from a possible 558. plFiberPlate : 25 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 53 possible sky positions to use as objects from a possible 555. plFiberPlate : 44 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 20 possible sky positions to use as objects from a possible 552. plFiberPlate : 9 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 11 possible sky positions to use as objects from a possible 549. plFiberPlate : 14 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 9 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 13 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2421.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2422.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2422.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2423.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 80 2 8 25 3 14 54 4 26 90 5 33 106 6 28 95 7 23 87 8 26 108 9 23 103 10 34 106 11 22 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 55 79 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 59 151 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 63 218 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 68 66 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 70 51 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 67 55 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 65 261 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 67 171 plFiberPlate : 104 possible sky positions to use as objects from a possible 487. plFiberPlate : 72 possible sky positions to use as objects from a possible 486. plFiberPlate : 59 possible sky positions to use as objects from a possible 485. plFiberPlate : 37 possible sky positions to use as objects from a possible 484. plFiberPlate : 27 possible sky positions to use as objects from a possible 483. plFiberPlate : 24 possible sky positions to use as objects from a possible 482. plFiberPlate : 42 possible sky positions to use as objects from a possible 481. plFiberPlate : 56 possible sky positions to use as objects from a possible 480. plFiberPlate : 35 possible sky positions to use as objects from a possible 479. plFiberPlate : 26 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 7 possible sky positions to use as objects from a possible 476. plFiberPlate : 12 possible sky positions to use as objects from a possible 475. plFiberPlate : 18 possible sky positions to use as objects from a possible 474. plFiberPlate : 14 possible sky positions to use as objects from a possible 473. plFiberPlate : 17 possible sky positions to use as objects from a possible 472. plFiberPlate : 46 possible sky positions to use as objects from a possible 471. plFiberPlate : 31 possible sky positions to use as objects from a possible 470. plFiberPlate : 25 possible sky positions to use as objects from a possible 469. plFiberPlate : 15 possible sky positions to use as objects from a possible 468. plFiberPlate : 6 possible sky positions to use as objects from a possible 467. plFiberPlate : 13 possible sky positions to use as objects from a possible 466. plFiberPlate : 10 possible sky positions to use as objects from a possible 465. plFiberPlate : 9 possible sky positions to use as objects from a possible 464. plFiberPlate : 19 possible sky positions to use as objects from a possible 463. plFiberPlate : 42 possible sky positions to use as objects from a possible 462. plFiberPlate : 54 possible sky positions to use as objects from a possible 461. plFiberPlate : 30 possible sky positions to use as objects from a possible 460. plFiberPlate : 11 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 14 possible sky positions to use as objects from a possible 457. plFiberPlate : 19 possible sky positions to use as objects from a possible 456. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2422.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2423.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2423.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2424.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 98 2 22 50 3 30 72 4 27 109 5 21 109 6 22 83 7 28 100 8 32 119 9 26 112 10 38 124 11 25 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 93 203 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 80 173 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 88 243 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 73 66 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 67 55 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 77 293 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 67 171 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 78 110 plFiberPlate : 115 possible sky positions to use as objects from a possible 541. plFiberPlate : 79 possible sky positions to use as objects from a possible 540. plFiberPlate : 32 possible sky positions to use as objects from a possible 539. plFiberPlate : 34 possible sky positions to use as objects from a possible 538. plFiberPlate : 18 possible sky positions to use as objects from a possible 537. plFiberPlate : 15 possible sky positions to use as objects from a possible 536. plFiberPlate : 38 possible sky positions to use as objects from a possible 535. plFiberPlate : 87 possible sky positions to use as objects from a possible 534. plFiberPlate : 59 possible sky positions to use as objects from a possible 533. plFiberPlate : 50 possible sky positions to use as objects from a possible 532. plFiberPlate : 19 possible sky positions to use as objects from a possible 531. plFiberPlate : 14 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 11 possible sky positions to use as objects from a possible 528. plFiberPlate : 13 possible sky positions to use as objects from a possible 527. plFiberPlate : 33 possible sky positions to use as objects from a possible 526. plFiberPlate : 66 possible sky positions to use as objects from a possible 525. plFiberPlate : 40 possible sky positions to use as objects from a possible 524. plFiberPlate : 33 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 14 possible sky positions to use as objects from a possible 521. plFiberPlate : 5 possible sky positions to use as objects from a possible 520. plFiberPlate : 4 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 33 possible sky positions to use as objects from a possible 517. plFiberPlate : 60 possible sky positions to use as objects from a possible 516. plFiberPlate : 42 possible sky positions to use as objects from a possible 515. plFiberPlate : 32 possible sky positions to use as objects from a possible 514. plFiberPlate : 21 possible sky positions to use as objects from a possible 513. plFiberPlate : 13 possible sky positions to use as objects from a possible 512. plFiberPlate : 25 possible sky positions to use as objects from a possible 511. plFiberPlate : 38 possible sky positions to use as objects from a possible 510. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2423.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2424.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2424.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2425.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 114 2 31 102 3 21 86 4 28 88 5 24 111 6 20 103 7 32 91 8 31 103 9 36 91 10 41 125 11 39 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 95 56 plFiberPlate : adding spectro-photo std with objId = 5182 40 4 94 32 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 101 98 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 102 21 plFiberPlate : adding spectro-photo std with objId = 5794 40 5 75 103 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 96 116 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 93 79 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 88 243 plFiberPlate : 99 possible sky positions to use as objects from a possible 559. plFiberPlate : 69 possible sky positions to use as objects from a possible 558. plFiberPlate : 54 possible sky positions to use as objects from a possible 557. plFiberPlate : 29 possible sky positions to use as objects from a possible 556. plFiberPlate : 20 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 65 possible sky positions to use as objects from a possible 553. plFiberPlate : 40 possible sky positions to use as objects from a possible 552. plFiberPlate : 39 possible sky positions to use as objects from a possible 551. plFiberPlate : 19 possible sky positions to use as objects from a possible 550. plFiberPlate : 12 possible sky positions to use as objects from a possible 549. plFiberPlate : 5 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 2 possible sky positions to use as objects from a possible 546. plFiberPlate : 8 possible sky positions to use as objects from a possible 545. plFiberPlate : 34 possible sky positions to use as objects from a possible 544. plFiberPlate : 48 possible sky positions to use as objects from a possible 543. plFiberPlate : 31 possible sky positions to use as objects from a possible 542. plFiberPlate : 26 possible sky positions to use as objects from a possible 541. plFiberPlate : 19 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 6 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 20 possible sky positions to use as objects from a possible 535. plFiberPlate : 34 possible sky positions to use as objects from a possible 534. plFiberPlate : 47 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 5 possible sky positions to use as objects from a possible 531. plFiberPlate : 12 possible sky positions to use as objects from a possible 530. plFiberPlate : 24 possible sky positions to use as objects from a possible 529. plFiberPlate : 21 possible sky positions to use as objects from a possible 528. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2424.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2425.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2425.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2426.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 98 2 12 55 3 19 67 4 29 104 5 31 120 6 21 88 7 21 82 8 26 105 9 28 95 10 27 122 11 27 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 102 73 plFiberPlate : adding spectro-photo std with objId = 5182 40 4 94 32 plFiberPlate : adding spectro-photo std with objId = 5849 40 2 88 71 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 90 165 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 82 47 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 97 90 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 80 173 plFiberPlate : adding spectro-photo std with objId = 5849 40 2 93 100 plFiberPlate : 95 possible sky positions to use as objects from a possible 523. plFiberPlate : 76 possible sky positions to use as objects from a possible 522. plFiberPlate : 44 possible sky positions to use as objects from a possible 521. plFiberPlate : 27 possible sky positions to use as objects from a possible 520. plFiberPlate : 17 possible sky positions to use as objects from a possible 519. plFiberPlate : 29 possible sky positions to use as objects from a possible 518. plFiberPlate : 37 possible sky positions to use as objects from a possible 517. plFiberPlate : 74 possible sky positions to use as objects from a possible 516. plFiberPlate : 55 possible sky positions to use as objects from a possible 515. plFiberPlate : 25 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : 7 possible sky positions to use as objects from a possible 512. plFiberPlate : 10 possible sky positions to use as objects from a possible 511. plFiberPlate : 14 possible sky positions to use as objects from a possible 510. plFiberPlate : 21 possible sky positions to use as objects from a possible 509. plFiberPlate : 25 possible sky positions to use as objects from a possible 508. plFiberPlate : 80 possible sky positions to use as objects from a possible 507. plFiberPlate : 56 possible sky positions to use as objects from a possible 506. plFiberPlate : 35 possible sky positions to use as objects from a possible 505. plFiberPlate : 27 possible sky positions to use as objects from a possible 504. plFiberPlate : 9 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 15 possible sky positions to use as objects from a possible 501. plFiberPlate : 22 possible sky positions to use as objects from a possible 500. plFiberPlate : 33 possible sky positions to use as objects from a possible 499. plFiberPlate : 47 possible sky positions to use as objects from a possible 498. plFiberPlate : 48 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 13 possible sky positions to use as objects from a possible 495. plFiberPlate : 20 possible sky positions to use as objects from a possible 494. plFiberPlate : 14 possible sky positions to use as objects from a possible 493. plFiberPlate : 21 possible sky positions to use as objects from a possible 492. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2425.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2426.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2426.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2427.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 110 2 21 75 3 15 80 4 26 100 5 27 117 6 21 92 7 12 88 8 28 97 9 14 104 10 27 120 11 21 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5794 40 4 86 150 plFiberPlate : adding spectro-photo std with objId = 5794 40 5 100 121 plFiberPlate : adding spectro-photo std with objId = 5794 40 5 88 10 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 101 98 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 111 88 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 102 21 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 111 239 plFiberPlate : adding spectro-photo std with objId = 5794 40 2 85 166 plFiberPlate : 104 possible sky positions to use as objects from a possible 551. plFiberPlate : 84 possible sky positions to use as objects from a possible 550. plFiberPlate : 50 possible sky positions to use as objects from a possible 549. plFiberPlate : 28 possible sky positions to use as objects from a possible 548. plFiberPlate : 29 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 40 possible sky positions to use as objects from a possible 545. plFiberPlate : 67 possible sky positions to use as objects from a possible 544. plFiberPlate : 45 possible sky positions to use as objects from a possible 543. plFiberPlate : 19 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 8 possible sky positions to use as objects from a possible 540. plFiberPlate : 6 possible sky positions to use as objects from a possible 539. plFiberPlate : 8 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 36 possible sky positions to use as objects from a possible 536. plFiberPlate : 59 possible sky positions to use as objects from a possible 535. plFiberPlate : 49 possible sky positions to use as objects from a possible 534. plFiberPlate : 26 possible sky positions to use as objects from a possible 533. plFiberPlate : 26 possible sky positions to use as objects from a possible 532. plFiberPlate : 17 possible sky positions to use as objects from a possible 531. plFiberPlate : 6 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 27 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 63 possible sky positions to use as objects from a possible 526. plFiberPlate : 40 possible sky positions to use as objects from a possible 525. plFiberPlate : 32 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 22 possible sky positions to use as objects from a possible 521. plFiberPlate : 28 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2426.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2427.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2427.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2428.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 52 87 2 27 56 3 26 75 4 33 107 5 21 111 6 15 82 7 22 87 8 27 100 9 21 94 10 54 134 11 41 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 102 73 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 124 173 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 90 165 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 117 62 plFiberPlate : adding spectro-photo std with objId = 5849 40 2 93 100 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 108 257 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 97 90 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 98 108 plFiberPlate : 116 possible sky positions to use as objects from a possible 524. plFiberPlate : 80 possible sky positions to use as objects from a possible 523. plFiberPlate : 28 possible sky positions to use as objects from a possible 522. plFiberPlate : 29 possible sky positions to use as objects from a possible 521. plFiberPlate : 16 possible sky positions to use as objects from a possible 520. plFiberPlate : 23 possible sky positions to use as objects from a possible 519. plFiberPlate : 34 possible sky positions to use as objects from a possible 518. plFiberPlate : 78 possible sky positions to use as objects from a possible 517. plFiberPlate : 74 possible sky positions to use as objects from a possible 516. plFiberPlate : 30 possible sky positions to use as objects from a possible 515. plFiberPlate : 17 possible sky positions to use as objects from a possible 514. plFiberPlate : 9 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 17 possible sky positions to use as objects from a possible 510. plFiberPlate : 13 possible sky positions to use as objects from a possible 509. plFiberPlate : 51 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 16 possible sky positions to use as objects from a possible 506. plFiberPlate : 11 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 21 possible sky positions to use as objects from a possible 503. plFiberPlate : 5 possible sky positions to use as objects from a possible 502. plFiberPlate : 13 possible sky positions to use as objects from a possible 501. plFiberPlate : 12 possible sky positions to use as objects from a possible 500. plFiberPlate : 35 possible sky positions to use as objects from a possible 499. plFiberPlate : 29 possible sky positions to use as objects from a possible 498. plFiberPlate : 26 possible sky positions to use as objects from a possible 497. plFiberPlate : 18 possible sky positions to use as objects from a possible 496. plFiberPlate : 7 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2427.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2428.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2428.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2429.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 106 2 19 94 3 16 95 4 27 101 5 21 122 6 14 107 7 16 102 8 32 105 9 29 99 10 33 142 11 13 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5182 40 5 117 27 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 122 40 plFiberPlate : adding spectro-photo std with objId = 5794 40 5 100 121 plFiberPlate : adding spectro-photo std with objId = 5125 41 3 29 61 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 111 88 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 111 239 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 127 8 plFiberPlate : adding spectro-photo std with objId = 5182 40 4 116 100 plFiberPlate : 118 possible sky positions to use as objects from a possible 594. plFiberPlate : 46 possible sky positions to use as objects from a possible 593. plFiberPlate : 37 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 34 possible sky positions to use as objects from a possible 590. plFiberPlate : 12 possible sky positions to use as objects from a possible 589. plFiberPlate : 33 possible sky positions to use as objects from a possible 588. plFiberPlate : 81 possible sky positions to use as objects from a possible 587. plFiberPlate : 52 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 10 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 16 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 74 possible sky positions to use as objects from a possible 578. plFiberPlate : 43 possible sky positions to use as objects from a possible 577. plFiberPlate : 24 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 7 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 42 possible sky positions to use as objects from a possible 569. plFiberPlate : 30 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 3 possible sky positions to use as objects from a possible 566. plFiberPlate : 10 possible sky positions to use as objects from a possible 565. plFiberPlate : 19 possible sky positions to use as objects from a possible 564. plFiberPlate : 22 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2428.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2429.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2429.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2430.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 102 2 26 72 3 39 68 4 45 92 5 30 123 6 14 89 7 19 80 8 26 90 9 22 91 10 48 143 11 27 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 13 35 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 116 121 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 116 91 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 107 96 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 130 160 plFiberPlate : adding spectro-photo std with objId = 5849 40 5 112 41 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 114 143 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 120 80 plFiberPlate : 94 possible sky positions to use as objects from a possible 516. plFiberPlate : 47 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 28 possible sky positions to use as objects from a possible 513. plFiberPlate : 39 possible sky positions to use as objects from a possible 512. plFiberPlate : 24 possible sky positions to use as objects from a possible 511. plFiberPlate : 20 possible sky positions to use as objects from a possible 510. plFiberPlate : 52 possible sky positions to use as objects from a possible 509. plFiberPlate : 36 possible sky positions to use as objects from a possible 508. plFiberPlate : 26 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 15 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 5 possible sky positions to use as objects from a possible 502. plFiberPlate : 18 possible sky positions to use as objects from a possible 501. plFiberPlate : 50 possible sky positions to use as objects from a possible 500. plFiberPlate : 33 possible sky positions to use as objects from a possible 499. plFiberPlate : 13 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 3 possible sky positions to use as objects from a possible 496. plFiberPlate : 21 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 49 possible sky positions to use as objects from a possible 491. plFiberPlate : 24 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 8 possible sky positions to use as objects from a possible 488. plFiberPlate : 10 possible sky positions to use as objects from a possible 487. plFiberPlate : 23 possible sky positions to use as objects from a possible 486. plFiberPlate : 14 possible sky positions to use as objects from a possible 485. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2429.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2430.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2430.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2431.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 113 2 12 99 3 11 89 4 21 99 5 38 122 6 25 103 7 20 90 8 22 99 9 35 103 10 22 149 11 16 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5125 41 4 42 14 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 140 56 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 130 160 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 143 19 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 142 145 plFiberPlate : adding spectro-photo std with objId = 5125 41 3 38 40 plFiberPlate : adding spectro-photo std with objId = 5125 41 4 35 98 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 136 158 plFiberPlate : 119 possible sky positions to use as objects from a possible 583. plFiberPlate : 71 possible sky positions to use as objects from a possible 582. plFiberPlate : 43 possible sky positions to use as objects from a possible 581. plFiberPlate : 25 possible sky positions to use as objects from a possible 580. plFiberPlate : 35 possible sky positions to use as objects from a possible 579. plFiberPlate : 37 possible sky positions to use as objects from a possible 578. plFiberPlate : 47 possible sky positions to use as objects from a possible 577. plFiberPlate : 71 possible sky positions to use as objects from a possible 576. plFiberPlate : 55 possible sky positions to use as objects from a possible 575. plFiberPlate : 31 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 10 possible sky positions to use as objects from a possible 572. plFiberPlate : 20 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 23 possible sky positions to use as objects from a possible 568. plFiberPlate : 76 possible sky positions to use as objects from a possible 567. plFiberPlate : 48 possible sky positions to use as objects from a possible 566. plFiberPlate : 26 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 5 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 52 possible sky positions to use as objects from a possible 558. plFiberPlate : 34 possible sky positions to use as objects from a possible 557. plFiberPlate : 18 possible sky positions to use as objects from a possible 556. plFiberPlate : 27 possible sky positions to use as objects from a possible 555. plFiberPlate : 16 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 10 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2430.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2431.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2431.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2432.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 108 2 14 96 3 19 102 4 30 108 5 34 116 6 16 103 7 13 88 8 14 94 9 22 107 10 30 158 11 12 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5125 41 4 50 65 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 148 130 plFiberPlate : adding spectro-photo std with objId = 5125 41 4 42 14 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 150 113 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 143 19 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 142 145 plFiberPlate : adding spectro-photo std with objId = 5125 41 3 38 40 plFiberPlate : adding spectro-photo std with objId = 5125 41 4 35 98 plFiberPlate : 114 possible sky positions to use as objects from a possible 582. plFiberPlate : 85 possible sky positions to use as objects from a possible 581. plFiberPlate : 56 possible sky positions to use as objects from a possible 580. plFiberPlate : 55 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 17 possible sky positions to use as objects from a possible 577. plFiberPlate : 37 possible sky positions to use as objects from a possible 576. plFiberPlate : 57 possible sky positions to use as objects from a possible 575. plFiberPlate : 36 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 4 possible sky positions to use as objects from a possible 571. plFiberPlate : 2 possible sky positions to use as objects from a possible 570. plFiberPlate : 5 possible sky positions to use as objects from a possible 569. plFiberPlate : 5 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 76 possible sky positions to use as objects from a possible 566. plFiberPlate : 55 possible sky positions to use as objects from a possible 565. plFiberPlate : 22 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 49 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 14 possible sky positions to use as objects from a possible 555. plFiberPlate : 7 possible sky positions to use as objects from a possible 554. plFiberPlate : 2 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2431.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2432.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2432.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2433.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 111 2 18 79 3 23 78 4 35 86 5 21 119 6 17 104 7 16 85 8 20 103 9 17 104 10 46 132 11 30 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 144 53 plFiberPlate : adding spectro-photo std with objId = 5182 40 3 130 135 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 114 175 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 123 35 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 124 18 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 120 80 plFiberPlate : adding spectro-photo std with objId = 5849 40 5 130 25 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 136 158 plFiberPlate : 92 possible sky positions to use as objects from a possible 552. plFiberPlate : 69 possible sky positions to use as objects from a possible 551. plFiberPlate : 35 possible sky positions to use as objects from a possible 550. plFiberPlate : 19 possible sky positions to use as objects from a possible 549. plFiberPlate : 17 possible sky positions to use as objects from a possible 548. plFiberPlate : 31 possible sky positions to use as objects from a possible 547. plFiberPlate : 46 possible sky positions to use as objects from a possible 546. plFiberPlate : 66 possible sky positions to use as objects from a possible 545. plFiberPlate : 51 possible sky positions to use as objects from a possible 544. plFiberPlate : 33 possible sky positions to use as objects from a possible 543. plFiberPlate : 17 possible sky positions to use as objects from a possible 542. plFiberPlate : 18 possible sky positions to use as objects from a possible 541. plFiberPlate : 17 possible sky positions to use as objects from a possible 540. plFiberPlate : 17 possible sky positions to use as objects from a possible 539. plFiberPlate : 11 possible sky positions to use as objects from a possible 538. plFiberPlate : 6 possible sky positions to use as objects from a possible 537. plFiberPlate : 41 possible sky positions to use as objects from a possible 536. plFiberPlate : 55 possible sky positions to use as objects from a possible 535. plFiberPlate : 37 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 7 possible sky positions to use as objects from a possible 532. plFiberPlate : 6 possible sky positions to use as objects from a possible 531. plFiberPlate : 24 possible sky positions to use as objects from a possible 530. plFiberPlate : 30 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 35 possible sky positions to use as objects from a possible 527. plFiberPlate : 42 possible sky positions to use as objects from a possible 526. plFiberPlate : 31 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 6 possible sky positions to use as objects from a possible 522. plFiberPlate : 2 possible sky positions to use as objects from a possible 521. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2432.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2433.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2433.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2434.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 98 2 17 73 3 23 80 4 28 107 5 24 114 6 18 86 7 17 90 8 28 102 9 16 108 10 34 134 11 18 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 134 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 148 69 plFiberPlate : adding spectro-photo std with objId = 5815 40 2 96 69 plFiberPlate : adding spectro-photo std with objId = 5849 40 5 139 10 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 131 59 plFiberPlate : adding spectro-photo std with objId = 5935 40 5 124 18 plFiberPlate : adding spectro-photo std with objId = 5849 40 5 130 25 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 133 43 plFiberPlate : 126 possible sky positions to use as objects from a possible 557. plFiberPlate : 73 possible sky positions to use as objects from a possible 556. plFiberPlate : 50 possible sky positions to use as objects from a possible 555. plFiberPlate : 19 possible sky positions to use as objects from a possible 554. plFiberPlate : 22 possible sky positions to use as objects from a possible 553. plFiberPlate : 22 possible sky positions to use as objects from a possible 552. plFiberPlate : 39 possible sky positions to use as objects from a possible 551. plFiberPlate : 83 possible sky positions to use as objects from a possible 550. plFiberPlate : 38 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 5 possible sky positions to use as objects from a possible 547. plFiberPlate : 7 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 9 possible sky positions to use as objects from a possible 542. plFiberPlate : 70 possible sky positions to use as objects from a possible 541. plFiberPlate : 26 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 13 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 16 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 31 possible sky positions to use as objects from a possible 532. plFiberPlate : 31 possible sky positions to use as objects from a possible 531. plFiberPlate : 22 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 17 possible sky positions to use as objects from a possible 527. plFiberPlate : 29 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2433.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2434.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2434.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2435.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 136 2 16 101 3 9 95 4 14 121 5 21 116 6 17 90 7 16 101 8 16 116 9 21 96 10 26 156 11 13 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5815 40 5 96 44 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 56 29 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 159 80 plFiberPlate : adding spectro-photo std with objId = 5815 40 4 102 79 plFiberPlate : adding spectro-photo std with objId = 5125 41 3 54 6 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 163 50 plFiberPlate : adding spectro-photo std with objId = 5125 41 2 62 87 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 59 2 plFiberPlate : 119 possible sky positions to use as objects from a possible 623. plFiberPlate : 44 possible sky positions to use as objects from a possible 622. plFiberPlate : 29 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 21 possible sky positions to use as objects from a possible 619. plFiberPlate : 23 possible sky positions to use as objects from a possible 618. plFiberPlate : 56 possible sky positions to use as objects from a possible 617. plFiberPlate : 95 possible sky positions to use as objects from a possible 616. plFiberPlate : 19 possible sky positions to use as objects from a possible 615. plFiberPlate : 17 possible sky positions to use as objects from a possible 614. plFiberPlate : 9 possible sky positions to use as objects from a possible 613. plFiberPlate : 10 possible sky positions to use as objects from a possible 612. plFiberPlate : 20 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 25 possible sky positions to use as objects from a possible 609. plFiberPlate : 18 possible sky positions to use as objects from a possible 608. plFiberPlate : 38 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 8 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 3 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : 13 possible sky positions to use as objects from a possible 598. plFiberPlate : 16 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 6 possible sky positions to use as objects from a possible 595. plFiberPlate : 4 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 38 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2434.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2435.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2435.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2436.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 117 2 17 68 3 21 80 4 29 105 5 19 117 6 12 106 7 10 96 8 15 120 9 21 103 10 38 140 11 22 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 141 51 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 150 85 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 164 51 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 146 2 plFiberPlate : adding spectro-photo std with objId = 5815 40 3 95 77 plFiberPlate : adding spectro-photo std with objId = 5849 40 5 139 10 plFiberPlate : adding spectro-photo std with objId = 5849 40 4 144 38 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 166 112 plFiberPlate : 120 possible sky positions to use as objects from a possible 581. plFiberPlate : 64 possible sky positions to use as objects from a possible 580. plFiberPlate : 31 possible sky positions to use as objects from a possible 579. plFiberPlate : 23 possible sky positions to use as objects from a possible 578. plFiberPlate : 26 possible sky positions to use as objects from a possible 577. plFiberPlate : 38 possible sky positions to use as objects from a possible 576. plFiberPlate : 37 possible sky positions to use as objects from a possible 575. plFiberPlate : 101 possible sky positions to use as objects from a possible 574. plFiberPlate : 77 possible sky positions to use as objects from a possible 573. plFiberPlate : 43 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 6 possible sky positions to use as objects from a possible 570. plFiberPlate : 9 possible sky positions to use as objects from a possible 569. plFiberPlate : 8 possible sky positions to use as objects from a possible 568. plFiberPlate : 35 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 60 possible sky positions to use as objects from a possible 565. plFiberPlate : 48 possible sky positions to use as objects from a possible 564. plFiberPlate : 34 possible sky positions to use as objects from a possible 563. plFiberPlate : 23 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 13 possible sky positions to use as objects from a possible 560. plFiberPlate : 16 possible sky positions to use as objects from a possible 559. plFiberPlate : 26 possible sky positions to use as objects from a possible 558. plFiberPlate : 35 possible sky positions to use as objects from a possible 557. plFiberPlate : 47 possible sky positions to use as objects from a possible 556. plFiberPlate : 43 possible sky positions to use as objects from a possible 555. plFiberPlate : 25 possible sky positions to use as objects from a possible 554. plFiberPlate : 30 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 18 possible sky positions to use as objects from a possible 551. plFiberPlate : 22 possible sky positions to use as objects from a possible 550. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2435.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2436.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2436.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2437.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 117 2 9 97 3 7 89 4 18 96 5 29 115 6 21 92 7 17 94 8 19 114 9 21 119 10 15 157 11 12 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 59 80 plFiberPlate : adding spectro-photo std with objId = 5125 41 2 60 64 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 174 154 plFiberPlate : adding spectro-photo std with objId = 5815 40 4 102 79 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 164 51 plFiberPlate : adding spectro-photo std with objId = 5137 40 3 163 50 plFiberPlate : adding spectro-photo std with objId = 5125 41 2 62 87 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 59 2 plFiberPlate : 113 possible sky positions to use as objects from a possible 599. plFiberPlate : 93 possible sky positions to use as objects from a possible 598. plFiberPlate : 42 possible sky positions to use as objects from a possible 597. plFiberPlate : 20 possible sky positions to use as objects from a possible 596. plFiberPlate : 21 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 84 possible sky positions to use as objects from a possible 593. plFiberPlate : 87 possible sky positions to use as objects from a possible 592. plFiberPlate : 84 possible sky positions to use as objects from a possible 591. plFiberPlate : 65 possible sky positions to use as objects from a possible 590. plFiberPlate : 29 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 20 possible sky positions to use as objects from a possible 586. plFiberPlate : 12 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 82 possible sky positions to use as objects from a possible 583. plFiberPlate : 67 possible sky positions to use as objects from a possible 582. plFiberPlate : 55 possible sky positions to use as objects from a possible 581. plFiberPlate : 43 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 21 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 48 possible sky positions to use as objects from a possible 574. plFiberPlate : 36 possible sky positions to use as objects from a possible 573. plFiberPlate : 39 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 24 possible sky positions to use as objects from a possible 570. plFiberPlate : 27 possible sky positions to use as objects from a possible 569. plFiberPlate : 23 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2436.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2437.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2437.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2438.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 112 2 10 79 3 24 82 4 30 109 5 14 109 6 10 89 7 8 103 8 14 118 9 10 111 10 30 154 11 14 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 177 200 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 177 118 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 150 85 plFiberPlate : adding spectro-photo std with objId = 5935 40 4 152 114 plFiberPlate : adding spectro-photo std with objId = 5312 40 5 51 179 plFiberPlate : adding spectro-photo std with objId = 5312 40 4 50 51 plFiberPlate : adding spectro-photo std with objId = 5849 40 3 146 2 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 166 112 plFiberPlate : 126 possible sky positions to use as objects from a possible 591. plFiberPlate : 58 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 26 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 55 possible sky positions to use as objects from a possible 585. plFiberPlate : 87 possible sky positions to use as objects from a possible 584. plFiberPlate : 87 possible sky positions to use as objects from a possible 583. plFiberPlate : 77 possible sky positions to use as objects from a possible 582. plFiberPlate : 43 possible sky positions to use as objects from a possible 581. plFiberPlate : 32 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 20 possible sky positions to use as objects from a possible 578. plFiberPlate : 23 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 63 possible sky positions to use as objects from a possible 575. plFiberPlate : 51 possible sky positions to use as objects from a possible 574. plFiberPlate : 43 possible sky positions to use as objects from a possible 573. plFiberPlate : 27 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 9 possible sky positions to use as objects from a possible 570. plFiberPlate : 17 possible sky positions to use as objects from a possible 569. plFiberPlate : 27 possible sky positions to use as objects from a possible 568. plFiberPlate : 20 possible sky positions to use as objects from a possible 567. plFiberPlate : 25 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : 17 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 27 possible sky positions to use as objects from a possible 560. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2437.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2438.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2438.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2439.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 116 2 9 81 3 10 75 4 13 96 5 25 124 6 27 89 7 16 91 8 14 116 9 20 106 10 19 129 11 14 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5125 41 4 71 18 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 176 34 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 174 154 plFiberPlate : adding spectro-photo std with objId = 5815 40 4 116 157 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 180 131 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 75 17 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 179 56 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 78 78 plFiberPlate : 105 possible sky positions to use as objects from a possible 580. plFiberPlate : 82 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 17 possible sky positions to use as objects from a possible 577. plFiberPlate : 21 possible sky positions to use as objects from a possible 576. plFiberPlate : 29 possible sky positions to use as objects from a possible 575. plFiberPlate : 51 possible sky positions to use as objects from a possible 574. plFiberPlate : 78 possible sky positions to use as objects from a possible 573. plFiberPlate : 55 possible sky positions to use as objects from a possible 572. plFiberPlate : 42 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 22 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 35 possible sky positions to use as objects from a possible 565. plFiberPlate : 79 possible sky positions to use as objects from a possible 564. plFiberPlate : 63 possible sky positions to use as objects from a possible 563. plFiberPlate : 37 possible sky positions to use as objects from a possible 562. plFiberPlate : 25 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 13 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 12 possible sky positions to use as objects from a possible 557. plFiberPlate : 27 possible sky positions to use as objects from a possible 556. plFiberPlate : 72 possible sky positions to use as objects from a possible 555. plFiberPlate : 33 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 15 possible sky positions to use as objects from a possible 552. plFiberPlate : 25 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 60 possible sky positions to use as objects from a possible 549. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2438.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2439.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2439.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.02.1/plPlugMapP-2440.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 122 2 11 85 3 11 80 4 10 112 5 8 122 6 11 90 7 16 97 8 24 124 9 19 111 10 21 147 11 16 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5935 40 3 157 104 plFiberPlate : adding spectro-photo std with objId = 5312 40 5 50 172 plFiberPlate : adding spectro-photo std with objId = 5935 40 2 168 18 plFiberPlate : adding spectro-photo std with objId = 5815 40 1 120 81 plFiberPlate : adding spectro-photo std with objId = 5312 40 4 62 43 plFiberPlate : adding spectro-photo std with objId = 5312 40 4 50 51 plFiberPlate : adding spectro-photo std with objId = 5815 40 3 117 99 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 179 56 plFiberPlate : 126 possible sky positions to use as objects from a possible 609. plFiberPlate : 47 possible sky positions to use as objects from a possible 608. plFiberPlate : 30 possible sky positions to use as objects from a possible 607. plFiberPlate : 13 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 6 possible sky positions to use as objects from a possible 604. plFiberPlate : 41 possible sky positions to use as objects from a possible 603. plFiberPlate : 106 possible sky positions to use as objects from a possible 602. plFiberPlate : 83 possible sky positions to use as objects from a possible 601. plFiberPlate : 66 possible sky positions to use as objects from a possible 600. plFiberPlate : 49 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 22 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 7 possible sky positions to use as objects from a possible 595. plFiberPlate : 65 possible sky positions to use as objects from a possible 594. plFiberPlate : 77 possible sky positions to use as objects from a possible 593. plFiberPlate : 80 possible sky positions to use as objects from a possible 592. plFiberPlate : 57 possible sky positions to use as objects from a possible 591. plFiberPlate : 42 possible sky positions to use as objects from a possible 590. plFiberPlate : 24 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 4 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : 49 possible sky positions to use as objects from a possible 585. plFiberPlate : 46 possible sky positions to use as objects from a possible 584. plFiberPlate : 36 possible sky positions to use as objects from a possible 583. plFiberPlate : 23 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 63 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2439.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2440.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.02.1/plOverlay-2440.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Feb 3 17:32:04 CST 2006 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_194/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_194/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 23 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 22 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2418.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.5058,10.9428) and (-3.63,11.96) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2418.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2418.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 23 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2419.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2419.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2419.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2420.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.2547,11.0805) and (4.76,11.84) plMakeFanucCodes : fixed path between (-8.6482,9.2562) and (-10.92,5.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2420.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.5039,9.0962) and (-1.32,11.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2420.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 20 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2421.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2421.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2421.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2422.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2422.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2422.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2423.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2423.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2423.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2424.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2424.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2424.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2425.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2425.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2425.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2426.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5233,6.8645) and (-11.46,5.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2426.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2426.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2427.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.5714,-11.8773) and (-3.29,-12.21) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2427.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2427.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2428.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2428.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2428.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2429.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.3058,-9.7305) and (-7.08,-10.58) plMakeFanucCodes : fixed path between (11.8581,-4.8256) and (11.99,-3.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2429.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2429.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2430.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7252,-4.9432) and (12.05,-3.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2430.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2430.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2431.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2431.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2431.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2432.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2432.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2432.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2433.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.8978,3.4750) and (-12.60,2.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2433.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2433.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2434.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.1096,2.8195) and (-12.77,0.71) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2434.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.7201,11.1784) and (4.36,11.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2434.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2435.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2435.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2435.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2436.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.4984,11.9767) and (3.53,12.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2436.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2436.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2437.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7171,4.7901) and (12.23,2.77) plMakeFanucCodes : fixed path between (8.0955,-9.6910) and (5.37,-11.23) plMakeFanucCodes : fixed path between (5.2030,-11.6390) and (3.83,-12.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2437.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2437.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2438.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2438.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2438.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2439.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2439.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2439.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2440.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.7184,4.5342) and (-12.42,2.87) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2440.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.02.1/plFanuc-2440.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Feb 3 17:32:59 CST 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_194/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_194/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x9a73494 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 23 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2418 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 684 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2419 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 685 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2420 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2421 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 682 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2422 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2423 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2424 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2425 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2426 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2427 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2428 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2429 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2430 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2431 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2432 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2433 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2434 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2435 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2436 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2437 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2438 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2439 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2440 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Feb 3 17:33:20 CST 2006 Begin running "plateEnder dr2006.02.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_194/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_194/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.02.1 -morePipes 1" failed. PS: Read file for stderr output of this job.