! processor layout
! col row
1 1 
!
! information needed by the integrator:
! step-size, number of steps, and number of bunches/bins (??)
!
!   dt    Ntstep  Nbunch
1.0e-12 2000000 1
!
!
! PSdim  Nptcl   integF  errF  diagF  imchgF  imgCutOff (m)
6 10000 1 0 1 0 0.016
!
!
! information about mesh: number of points in x, y, and z, type
! of boundary conditions, transverse aperture size (m),
! and longitudinal domain size (m), which should be larger than the total
! beamline element length
!
!  Nx  Ny  Nz  bcF   Rx    Ry    Lz
32 32 32 1 0.15 0.15 1.0e5
!
!
! distribution type number, restart flag, space-charge substep
! flag, number of emission steps, and max emission time
!
! distType  restartF  substepF  Nemission  Temission
3 0 0 -1 1e-12
!
! the distribution type codes have the following correspondence
!  ijk Combined function distribution
! following three lines contain a total of 21 parameters (seven
! per degree of freedom) particular to the particle distribution
!
! in most cases, the columns are given by
!  sig*   sigp*  mu*p*  *scale  p*scale  xmu*      xmu*
!
0.001 0.0005 0.0  1. 1. 0.0 0.
0.001 0.0005 0.0  1. 1. 0.0 0.
0.001 0.0001 0.0  1. 1. 0.035 27.3536117969366
!
!
! information about the beam: current, kinetic energy, particle
! rest energy, particle charge, scale frequency, and initial
! cavity phase
!
! I/A   Ek/eV     Mc2/eV      Q/e  freq/Hz  phs/rad
0.0 0.5 0.511005e+06  -1.0 2856e6 0.0
!
!
! ======= machine description starts here =======
!  #    element    nparams  parameters (v0..v23)
! < 0  bpm           8
!   1  quadrupole    9      zedge, quad grad, fileID,
!                             radius, alignment error x, y
!                             rotation error x, y, z
!   4  dipole       10      zedge, field strength x, y, fileID,
!                             half of gap width(m), alignment error x, y
!                             rotation error x, y, z
! 105  SolRF        12      zedge, scale, RF frequency, theta0, fileID,
!                             radius, alignment error x, y
!                             rotation error x, y, z,
!                             Bz0
!
! L/m  N/A N/A  type  location of starting edge     v1            v23 /
!turn on 3D space charge effect
0.0367 1 1 0 0.0 0.1 /
!bend1, 20 degree rectangular bend, 0.1m long
0.1066 1    1       4    0.0367  0     -0.16275205803026052  201   0.005 /
!bend2
0.1066 1    1       4    1.6367  0      0.16275205803026052    202    0.005 /
!bend3
0.1066 1    1       4    2.4367  0      0.16275205803026052    203     0.005 /
!bend4
0.1066 1    1       4    4.0367  0      -0.16275205803026052    204    0.005 /
0.1   1    1       0    4.142    0.1  /