class AliTRDtrapConfigHandler: public TObject

 Reset all MCM registers and DMEM

 load a default configuration which is suitable for simulation
 for a detailed description of the registers see the TRAP manual
 if you want to resimulate tracklets on real data use the appropriate config instead

 load a TRAP configuration from a file
 The file format is the format created by the standalone
 command coder scc / show_cfdat but without the running number
 scc /show_cfdat adds as the first column
 which are two tools to inspect/export configurations from wingDB

 Process the LTU parameters and stores them in internal class variables
 or transfer the stored values to AliTRDtrapConfig, depending on the dest parameter

 Set timebins in the drift region

  Deflection length correction
  due to Lorentz angle and tilted pad correction
  This correction is in units of padwidth / (256*32)

 deflection range LUT
 range calculated according to B-field (in T) and pt_min (in GeV/c)
 if pt_min < 0.1 GeV/c the maximal allowed range for the tracklet
 deflection (-64..63) is used

 Prints some information about the geometry. Only for debugging

 Calculate the MCM individual correction factors for the PID
 and transfer them to AliTRDtrapConfig

 transfer the informations provided by LoadConfig to the internal class variables