In This Package:

SystemOfUnits Namespace Reference

Variables
int	millimeter = 1
	millimeter2 = millimeter*millimeter
	millimeter3 = millimeter*millimeter*millimeter
int	centimeter = 10
	centimeter2 = centimeter*centimeter
	centimeter3 = centimeter*centimeter*centimeter
int	meter = 1000
	meter2 = meter*meter
	meter3 = meter*meter*meter
int	kilometer = 1000
	kilometer2 = kilometer*kilometer
	kilometer3 = kilometer*kilometer*kilometer
float	parsec = 3.0856775807e+16
int	micrometer = 1
int	nanometer = 1
int	angstrom = 1
int	fermi = 1
int	barn = 1
int	millibarn = 1
int	microbarn = 1
int	nanobarn = 1
int	picobarn = 1
	mm = millimeter
int	mm2 = 2
int	mm3 = 3
	cm = centimeter
int	cm2 = 2
int	cm3 = 3
	m = meter
int	m2 = 2
int	m3 = 3
	km = kilometer
int	km2 = 2
int	km3 = 3
	pc = parsec
int	radian = 1
int	milliradian = 1
tuple	degree = (3.14159265358979323846/180.0)
int	steradian = 1
	rad = radian
	mrad = milliradian
	sr = steradian
	deg = degree
int	nanosecond = 1
int	second = 1
int	millisecond = 1
int	microsecond = 1
int	picosecond = 1
int	femtosecond = 1
int	hertz = 1
int	kilohertz = 1
int	megahertz = 1
	ns = nanosecond
	s = second
	ms = millisecond
int	eplus = 1
float	e_SI = 1.60217733e-19
	coulomb = eplus/e_SI
int	megaelectronvolt = 1
int	electronvolt = 1
int	kiloelectronvolt = 1
int	gigaelectronvolt = 1
int	teraelectronvolt = 1
int	petaelectronvolt = 1
	joule = electronvolt/e_SI
	MeV = megaelectronvolt
	eV = electronvolt
	keV = kiloelectronvolt
	GeV = gigaelectronvolt
	TeV = teraelectronvolt
	PeV = petaelectronvolt
tuple	kilogram = joule*second*second/(meter*meter)
int	gram = 1
int	milligram = 1
	kg = kilogram
	g = gram
	mg = milligram
	watt = joule/second
	newton = joule/meter
int	hep_pascal = 2
	pascal = hep_pascal
int	bar = 100000
int	atmosphere = 101325
	ampere = coulomb/second
int	milliampere = 1
int	microampere = 1
int	nanoampere = 1
	megavolt = megaelectronvolt/eplus
int	kilovolt = 1
int	volt = 1
	ohm = volt/ampere
	farad = coulomb/volt
int	millifarad = 1
int	microfarad = 1
int	nanofarad = 1
int	picofarad = 1
	weber = volt*second
int	tesla = 2
int	gauss = 1
int	kilogauss = 1
	henry = weber/ampere
int	kelvin = 1
int	mole = 1
int	becquerel = 1
float	curie = 3.7e+10
	gray = joule/kilogram
int	candela = 1
	lumen = candela*steradian
int	lux = 2
float	perCent = 0.01
float	perThousand = 0.001
float	perMillion = 0.000001

---

Variable Documentation

int SystemOfUnits::millimeter = 1 [static]

Definition at line 51 of file SystemOfUnits.py.

SystemOfUnits::millimeter2 = millimeter*millimeter [static]

Definition at line 52 of file SystemOfUnits.py.

SystemOfUnits::millimeter3 = millimeter*millimeter*millimeter [static]

Definition at line 53 of file SystemOfUnits.py.

int SystemOfUnits::centimeter = 10 [static]

Definition at line 55 of file SystemOfUnits.py.

SystemOfUnits::centimeter2 = centimeter*centimeter [static]

Definition at line 56 of file SystemOfUnits.py.

SystemOfUnits::centimeter3 = centimeter*centimeter*centimeter [static]

Definition at line 57 of file SystemOfUnits.py.

int SystemOfUnits::meter = 1000 [static]

Definition at line 59 of file SystemOfUnits.py.

SystemOfUnits::meter2 = meter*meter [static]

Definition at line 60 of file SystemOfUnits.py.

SystemOfUnits::meter3 = meter*meter*meter [static]

Definition at line 61 of file SystemOfUnits.py.

int SystemOfUnits::kilometer = 1000 [static]

Definition at line 63 of file SystemOfUnits.py.

SystemOfUnits::kilometer2 = kilometer*kilometer [static]

Definition at line 64 of file SystemOfUnits.py.

SystemOfUnits::kilometer3 = kilometer*kilometer*kilometer [static]

Definition at line 65 of file SystemOfUnits.py.

float SystemOfUnits::parsec = 3.0856775807e+16 [static]

Definition at line 67 of file SystemOfUnits.py.

int SystemOfUnits::micrometer = 1 [static]

Definition at line 69 of file SystemOfUnits.py.

int SystemOfUnits::nanometer = 1 [static]

Definition at line 70 of file SystemOfUnits.py.

int SystemOfUnits::angstrom = 1 [static]

Definition at line 71 of file SystemOfUnits.py.

int SystemOfUnits::fermi = 1 [static]

Definition at line 72 of file SystemOfUnits.py.

int SystemOfUnits::barn = 1 [static]

Definition at line 74 of file SystemOfUnits.py.

int SystemOfUnits::millibarn = 1 [static]

Definition at line 75 of file SystemOfUnits.py.

int SystemOfUnits::microbarn = 1 [static]

Definition at line 76 of file SystemOfUnits.py.

int SystemOfUnits::nanobarn = 1 [static]

Definition at line 77 of file SystemOfUnits.py.

int SystemOfUnits::picobarn = 1 [static]

Definition at line 78 of file SystemOfUnits.py.

SystemOfUnits::mm = millimeter [static]

Definition at line 81 of file SystemOfUnits.py.

int SystemOfUnits::mm2 = 2 [static]

Definition at line 82 of file SystemOfUnits.py.

int SystemOfUnits::mm3 = 3 [static]

Definition at line 83 of file SystemOfUnits.py.

SystemOfUnits::cm = centimeter [static]

Definition at line 85 of file SystemOfUnits.py.

int SystemOfUnits::cm2 = 2 [static]

Definition at line 86 of file SystemOfUnits.py.

int SystemOfUnits::cm3 = 3 [static]

Definition at line 87 of file SystemOfUnits.py.

SystemOfUnits::m = meter [static]

Definition at line 89 of file SystemOfUnits.py.

int SystemOfUnits::m2 = 2 [static]

Definition at line 90 of file SystemOfUnits.py.

int SystemOfUnits::m3 = 3 [static]

Definition at line 91 of file SystemOfUnits.py.

SystemOfUnits::km = kilometer [static]

Definition at line 93 of file SystemOfUnits.py.

int SystemOfUnits::km2 = 2 [static]

Definition at line 94 of file SystemOfUnits.py.

int SystemOfUnits::km3 = 3 [static]

Definition at line 95 of file SystemOfUnits.py.

SystemOfUnits::pc = parsec [static]

Definition at line 97 of file SystemOfUnits.py.

int SystemOfUnits::radian = 1 [static]

Definition at line 102 of file SystemOfUnits.py.

int SystemOfUnits::milliradian = 1 [static]

Definition at line 103 of file SystemOfUnits.py.

tuple SystemOfUnits::degree = (3.14159265358979323846/180.0) [static]

Definition at line 104 of file SystemOfUnits.py.

int SystemOfUnits::steradian = 1 [static]

Definition at line 106 of file SystemOfUnits.py.

SystemOfUnits::rad = radian [static]

Definition at line 109 of file SystemOfUnits.py.

SystemOfUnits::mrad = milliradian [static]

Definition at line 110 of file SystemOfUnits.py.

SystemOfUnits::sr = steradian [static]

Definition at line 111 of file SystemOfUnits.py.

SystemOfUnits::deg = degree [static]

Definition at line 112 of file SystemOfUnits.py.

int SystemOfUnits::nanosecond = 1 [static]

Definition at line 117 of file SystemOfUnits.py.

int SystemOfUnits::second = 1 [static]

Definition at line 118 of file SystemOfUnits.py.

int SystemOfUnits::millisecond = 1 [static]

Definition at line 119 of file SystemOfUnits.py.

int SystemOfUnits::microsecond = 1 [static]

Definition at line 120 of file SystemOfUnits.py.

int SystemOfUnits::picosecond = 1 [static]

Definition at line 121 of file SystemOfUnits.py.

int SystemOfUnits::femtosecond = 1 [static]

Definition at line 122 of file SystemOfUnits.py.

int SystemOfUnits::hertz = 1 [static]

Definition at line 124 of file SystemOfUnits.py.

int SystemOfUnits::kilohertz = 1 [static]

Definition at line 125 of file SystemOfUnits.py.

int SystemOfUnits::megahertz = 1 [static]

Definition at line 126 of file SystemOfUnits.py.

SystemOfUnits::ns = nanosecond [static]

Definition at line 129 of file SystemOfUnits.py.

SystemOfUnits::s = second [static]

Definition at line 130 of file SystemOfUnits.py.

SystemOfUnits::ms = millisecond [static]

Definition at line 131 of file SystemOfUnits.py.

int SystemOfUnits::eplus = 1 [static]

Definition at line 136 of file SystemOfUnits.py.

float SystemOfUnits::e_SI = 1.60217733e-19 [static]

Definition at line 137 of file SystemOfUnits.py.

SystemOfUnits::coulomb = eplus/e_SI [static]

Definition at line 138 of file SystemOfUnits.py.

int SystemOfUnits::megaelectronvolt = 1 [static]

Definition at line 143 of file SystemOfUnits.py.

int SystemOfUnits::electronvolt = 1 [static]

Definition at line 144 of file SystemOfUnits.py.

int SystemOfUnits::kiloelectronvolt = 1 [static]

Definition at line 145 of file SystemOfUnits.py.

int SystemOfUnits::gigaelectronvolt = 1 [static]

Definition at line 146 of file SystemOfUnits.py.

int SystemOfUnits::teraelectronvolt = 1 [static]

Definition at line 147 of file SystemOfUnits.py.

int SystemOfUnits::petaelectronvolt = 1 [static]

Definition at line 148 of file SystemOfUnits.py.

SystemOfUnits::joule = electronvolt/e_SI [static]

Definition at line 150 of file SystemOfUnits.py.

SystemOfUnits::MeV = megaelectronvolt [static]

Definition at line 153 of file SystemOfUnits.py.

SystemOfUnits::eV = electronvolt [static]

Definition at line 154 of file SystemOfUnits.py.

SystemOfUnits::keV = kiloelectronvolt [static]

Definition at line 155 of file SystemOfUnits.py.

SystemOfUnits::GeV = gigaelectronvolt [static]

Definition at line 156 of file SystemOfUnits.py.

SystemOfUnits::TeV = teraelectronvolt [static]

Definition at line 157 of file SystemOfUnits.py.

SystemOfUnits::PeV = petaelectronvolt [static]

Definition at line 158 of file SystemOfUnits.py.

tuple SystemOfUnits::kilogram = joule*second*second/(meter*meter) [static]

Definition at line 163 of file SystemOfUnits.py.

int SystemOfUnits::gram = 1 [static]

Definition at line 164 of file SystemOfUnits.py.

int SystemOfUnits::milligram = 1 [static]

Definition at line 165 of file SystemOfUnits.py.

SystemOfUnits::kg = kilogram [static]

Definition at line 168 of file SystemOfUnits.py.

SystemOfUnits::g = gram [static]

Definition at line 169 of file SystemOfUnits.py.

SystemOfUnits::mg = milligram [static]

Definition at line 170 of file SystemOfUnits.py.

SystemOfUnits::watt = joule/second [static]

Definition at line 175 of file SystemOfUnits.py.

SystemOfUnits::newton = joule/meter [static]

Definition at line 180 of file SystemOfUnits.py.

int SystemOfUnits::hep_pascal = 2 [static]

Definition at line 185 of file SystemOfUnits.py.

SystemOfUnits::pascal = hep_pascal [static]

Definition at line 186 of file SystemOfUnits.py.

int SystemOfUnits::bar = 100000 [static]

Definition at line 187 of file SystemOfUnits.py.

int SystemOfUnits::atmosphere = 101325 [static]

Definition at line 188 of file SystemOfUnits.py.

SystemOfUnits::ampere = coulomb/second [static]

Definition at line 193 of file SystemOfUnits.py.

int SystemOfUnits::milliampere = 1 [static]

Definition at line 194 of file SystemOfUnits.py.

int SystemOfUnits::microampere = 1 [static]

Definition at line 195 of file SystemOfUnits.py.

int SystemOfUnits::nanoampere = 1 [static]

Definition at line 196 of file SystemOfUnits.py.

SystemOfUnits::megavolt = megaelectronvolt/eplus [static]

Definition at line 201 of file SystemOfUnits.py.

int SystemOfUnits::kilovolt = 1 [static]

Definition at line 202 of file SystemOfUnits.py.

int SystemOfUnits::volt = 1 [static]

Definition at line 203 of file SystemOfUnits.py.

SystemOfUnits::ohm = volt/ampere [static]

Definition at line 208 of file SystemOfUnits.py.

SystemOfUnits::farad = coulomb/volt [static]

Definition at line 213 of file SystemOfUnits.py.

int SystemOfUnits::millifarad = 1 [static]

Definition at line 214 of file SystemOfUnits.py.

int SystemOfUnits::microfarad = 1 [static]

Definition at line 215 of file SystemOfUnits.py.

int SystemOfUnits::nanofarad = 1 [static]

Definition at line 216 of file SystemOfUnits.py.

int SystemOfUnits::picofarad = 1 [static]

Definition at line 217 of file SystemOfUnits.py.

SystemOfUnits::weber = volt*second [static]

Definition at line 222 of file SystemOfUnits.py.

int SystemOfUnits::tesla = 2 [static]

Definition at line 227 of file SystemOfUnits.py.

int SystemOfUnits::gauss = 1 [static]

Definition at line 229 of file SystemOfUnits.py.

int SystemOfUnits::kilogauss = 1 [static]

Definition at line 230 of file SystemOfUnits.py.

SystemOfUnits::henry = weber/ampere [static]

Definition at line 235 of file SystemOfUnits.py.

int SystemOfUnits::kelvin = 1 [static]

Definition at line 240 of file SystemOfUnits.py.

int SystemOfUnits::mole = 1 [static]

Definition at line 245 of file SystemOfUnits.py.

int SystemOfUnits::becquerel = 1 [static]

Definition at line 250 of file SystemOfUnits.py.

float SystemOfUnits::curie = 3.7e+10 [static]

Definition at line 251 of file SystemOfUnits.py.

SystemOfUnits::gray = joule/kilogram [static]

Definition at line 256 of file SystemOfUnits.py.

int SystemOfUnits::candela = 1 [static]

Definition at line 261 of file SystemOfUnits.py.

SystemOfUnits::lumen = candela*steradian [static]

Definition at line 266 of file SystemOfUnits.py.

int SystemOfUnits::lux = 2 [static]

Definition at line 271 of file SystemOfUnits.py.

float SystemOfUnits::perCent = 0.01 [static]

Definition at line 276 of file SystemOfUnits.py.

float SystemOfUnits::perThousand = 0.001 [static]

Definition at line 277 of file SystemOfUnits.py.

float SystemOfUnits::perMillion = 0.000001 [static]

Definition at line 278 of file SystemOfUnits.py.

---